CISCO-LWAPP-NETFLOW-MIB
AI MIB Summary
The CISCO-LWAPP-NETFLOW-MIB enables monitoring of IP traffic flow statistics exported by Cisco Lightweight Access Point Protocol (LWAPP) Wireless LAN Controllers acting as NetFlow exporters. This module provides visibility into traffic metrics aggregated from associated 802.11 Access Points, facilitating the collection of flow data for network analysis and capacity planning within a centralized controller architecture.
Netflow is a protocol for collecting IP traffic information from network devices for traffic monitoring. The netflow architecture consists of:
-Collector: An entity that collects all the IP traffic
info from various network elements
-Exporter: A network entity that exports the template
of the information that will be exported along with the actual data which maps to the exported template. WLC will play the role of an Exporter.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends it to the controller to which it is logically connected to.
Central Controller ( CC )
The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the communication between the Access Points and the controllers.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless network associated with an access point.
Main OID:
ciscoLwappNetflowMIB.1.3.6.1.4.1.9.9.99996
23
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
23 total| Object Name |
|---|
ciscoLwappNetflowMIBNetflow is a protocol for collecting IP traffic information
from network devices for traffic monitoring.
The netflow architecture consists of:
-Collector: An entity that collects all the IP traffic
info from various network elements
-Exporter: A network entity that exports the template
of the information that will be exported along
with the actual data which maps to the exported
template. WLC will play the role of an Exporter.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends it to the controller to which
it is logically connected to.
Central Controller ( CC )
The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity also referred to as 'controller'.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
controllers.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point. MODULE-IDENTITY .1.3.6.1.4.1.9.9.99996 |
ciscoLwappNetflowMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.99996.0 |
ciscoLwappNetflowMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.99996.1 |
ciscoLwappNetflowTableObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.99996.1.1 |
cLNetflowMonitorTableThis table represents the information about
netflow monitor SEQUENCE OF CLNetflowMonitorEntry .1.3.6.1.4.1.9.9.99996.1.1.1 |
cLNetflowMonitorEntryAn entry containing the configuration attributes
of netflow monitor. CLNetflowMonitorEntry .1.3.6.1.4.1.9.9.99996.1.1.1.1 |
cLNetflowMonitorNameThis object represents the netflow monitor name. SnmpAdminString .1.3.6.1.4.1.9.9.99996.1.1.1.1.1 |
cLNetflowMonitorRecordNameThis object represents the netflow monitor record type.
'none' specifies no record name is being used.
'none' should be used to delete record name from monitor.rw SnmpAdminString .1.3.6.1.4.1.9.9.99996.1.1.1.1.2 |
cLNetflowMonitorRowStatusThis object creates or deletes an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.99996.1.1.1.1.3 |
cLNetflowExporterTableThis table represents the information about
netflow exporter. SEQUENCE OF CLNetflowExporterEntry .1.3.6.1.4.1.9.9.99996.1.1.2 |
cLNetflowExporterEntryAn entry containing the configuration attributes
of netflow exporter. CLNetflowExporterEntry .1.3.6.1.4.1.9.9.99996.1.1.2.1 |
cLNetflowExporterNameThis object represents the netflow exporter name. SnmpAdminString .1.3.6.1.4.1.9.9.99996.1.1.2.1.1 |
cLNetflowExporterIPAddressTypeThis object represents the netflow exporter IP address type.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.99996.1.1.2.1.2 |
cLNetflowExporterIPAddressThis object represents the netflow exporter IP address.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.99996.1.1.2.1.3 |
cLNetflowExporterPortNumberThis object represents the netflow exporter port number.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.99996.1.1.2.1.4 |
cLNetflowExporterRowStatusThis object creates or deletes an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.99996.1.1.2.1.5 |
cLNetflowMonitorMappingTableThis table represents the netflow monitor and
exporter association. SEQUENCE OF CLNetflowMonitorMappingEntry .1.3.6.1.4.1.9.9.99996.1.1.3 |
cLNetflowMonitorMappingEntryAn entry containing the association between
netflow monitor and exporter. CLNetflowMonitorMappingEntry .1.3.6.1.4.1.9.9.99996.1.1.3.1 |
cLNetflowMonitorMappingExporterNameThis object represents the netflow exporter name. SnmpAdminString .1.3.6.1.4.1.9.9.99996.1.1.3.1.1 |
cLNetflowMonitorMappingRowStatusThis object creates or deletes an entry in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.99996.1.1.3.1.2 |
ciscoLwappNetflowMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.99996.2 |
ciscoLwappNetflowMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.99996.2.1 |
ciscoLwappNetflowMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.99996.2.2 |