CISCO-IP-NW-DISCOVERY-MIB
AI MIB Summary
The CISCO-IP-NW-DISCOVERY-MIB enables Cisco Fibre Channel switches to discover, configure, and report on multiple disjoint IP networks terminating on their Gigabit Ethernet interfaces within a fabric. It provides specific objects to initiate IP network discovery processes and retrieve the resulting topology data for switches supporting concurrent IP and Fibre Channel traffic.
MIB to provide the information about the disjoint IP networks connected to the various gigabit ethernet interfaces in the 'Fabric' and objects to discover the same.
It is possible that multiple disjoint IP networks may terminate on a single fibre channel switch in a Fabric.
This MIB provides ability to initiate, configure and show discovery results of the IP Networks in the fabric.
GLOSSARY:
Fabric - The set of physically connected fibre channel switches. WWN - World Wide Name.
Main OID:
ciscoIpNetworkDiscoveryMIB.1.3.6.1.4.1.9.9.434
29
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
29 total| Object Name |
|---|
ciscoIpNetworkDiscoveryMIBMIB to provide the information about the disjoint
IP networks connected to the various gigabit ethernet
interfaces in the 'Fabric' and objects to discover
the same.
It is possible that multiple disjoint IP networks
may terminate on a single fibre channel switch
in a Fabric.
This MIB provides ability to initiate, configure and
show discovery results of the IP Networks in
the fabric.
GLOSSARY:
Fabric - The set of physically connected fibre channel
switches.
WWN - World Wide Name. MODULE-IDENTITY .1.3.6.1.4.1.9.9.434 |
cIpNetworkDiscoveryMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.434.0 |
cIpNetworkDiscoveryMIBObjs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.434.1 |
cIpNetworkDiscoveryConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.434.1.1 |
cIpNetworkAutomaticDiscoveryThis object indicates whether the automatic discovery
to find the reachability on the IP networks is enabled
or not in the system.
If automatic discovery is not enabled in the system
then the discovery operation can be initiated only
manually by the user.
The value of this object set to 'true' indicates the
automatic discovery for IP network is enabled in
the system.
The value of this object set to 'false' indicates the
automatic discovery for IP network is not enabled in
the system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.434.1.1.1 |
cIpNetworkDiscoveryDelayThis object indicates the time duration between the
state change of an IP interface and the start of
discovery operation of interface, if Automatic
discovery is configured as 'true' in the
cIpNetworkAutomaticDiscovery object. The value '0'
indicates no delay.ro Integer32 (0..5184000 ) UNITS "seconds" .1.3.6.1.4.1.9.9.434.1.1.2 |
cIpNetworkDiscoveryTypeSpinLockThis object is used to facilitate modification of
cIpNetworkDiscoverType, cIpNetworkDiscoverPort
objects by multiple managers.
The procedure for modifying the above two objects
(only if the 'cIpNetworkDiscoveryType' is set to
tcp/udp) are as follows :
1. Determine the new values for
cIpNetworkDiscoverType, cIpNetworkDiscoverPort
objects.
2. Retrieve the value of
'cIpNetworkDiscoveryTypeSpinLock' object.
3. Set the value of 'cIpNetworkDiscoveryTypeSpinLock'
object to the retrieved value, and (in the same PDU)
the value of 'cIpNetworkDiscoveryType' to the new
value. If the set fails for the
'cIpNetworkDiscoveryTypeSpinLock' object, go back to
step 2.
4. Set the value of 'cIpNetworkDiscoveryTypeSpinLock'
object to the retrieved value incremented by one, and
(in the same PDU) the value of
'cIpNetworkDiscoveryPort' object to the
new value.
Note that if it's possible to include
'cIpNetworkDiscoveryPort' object in the
(Set Request) PDU of an earlier step, then step 4
can be eliminated.rw TestAndIncr (SNMPv2-TC) .1.3.6.1.4.1.9.9.434.1.1.3 |
cIpNetworkDiscoveryTypeThis object indicates type of discovery packets to
be sent for carrying out the IP network discovery.rw Enumeration .1.3.6.1.4.1.9.9.434.1.1.4 |
cIpNetworkDiscoveryPortThis object indicates TCP/UDP port used for of IP network
discovery operation, if the cIpNetworkDiscoveryType
object is set to 'tcp' or 'udp'.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.434.1.1.5 |
cIpNetworkDiscoverySpinLockThis object is used to facilitate modification of
cIpNetworkGigEIfIndexToDiscover,
cIpNetworkInetAddrTypeToDiscover,
cIpNetworkGigEInetAddrToDiscover
and cIpNetworkDiscoveryCommand objects by multiple
managers.
The procedure for modifying the above four objects are
as follows:
1. For interface specific discovery, determine the new
values for cIpNwGigEIfIndexToDiscover,
cIpNetworkInetAddrTypeToDiscover,
cIpNetworkGigEInetAddrToDiscover objects.
2. Retrieve the value of 'cIpNetworkDiscoverySpinLock'
object.
3. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value, and (in the same PDU)
the value of 'cIpNetworkGigEIfIndexToDiscover' to
the new value. If the set fails for the
'cIpNetworkDiscoverySpinLock' object, go back to
step 2.
4. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value incremented by one, and
(in the same PDU) the value of
'cIpNetworkInetAddrTypeToDiscover' object to the
new value.
5. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value incremented by two,
and (in the same PDU) the value of
'cIpNetworkGigEInetAddrToDiscover' object to the
new value.
If the set fails for 'cIpNetworkDiscoverySpinLock'
object go back to step 2.
6. Set the value of 'cIpNetworkDiscoverySpinLock'
object to the retrieved value incremented by four, and
(in the same PDU) the value of
'cIpNetworkDiscoveryCommand' object to
'interfaceSpecific'.
If the set fails for 'cIpNetworkDiscoverySpinLock'
object go back to step 2.
Note that if it's possible to include
'cIpNetworkGigEInetAddrToDiscover' and/or
'cIpNetworkDiscoveryCommand' object in the
(Set Request) PDU of an earlier step, then step 4 (or) 5
(or) 6 can be eliminated.rw TestAndIncr (SNMPv2-TC) .1.3.6.1.4.1.9.9.434.1.1.6 |
cIpNetworkGigEIfIndexToDiscoverThis object represents the 'ifIndex' of the specified
gigabit ethernet interface for which the IP network
discovery needs to be done incrementally.
This object MUST be set to a valid value before or
concurrently with setting the value of the
'cIpNetworkDiscoveryCommand' object
to 'interfaceSpecific'.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.9.9.434.1.1.7 |
cIpNetworkInetAddrTypeToDiscoverThis object represents the 'InetAddressType' of the
address of the Gigabit ethernet port on which to
perform the discovery.
This object MUST be set to a valid value before or
concurrently with setting the value of the
'cIpNetworkDiscoveryCommand' object to
'interfaceSpecific'.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.434.1.1.8 |
cIpNetworkGigEInetAddrToDiscoverThis object represents the 'InetAddress' of the specified
gigabit ethernet interface specified in the
'cIpNetworkGigEIfIndexToDiscover' for which the IP
network discovery needs to be done incrementally.
This object MUST be set to a valid value before or
concurrently with setting the value of the
'cIpNetworkDiscoveryCommand' object to
'interfaceSpecific'.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.434.1.1.9 |
cIpNetworkDiscoveryCommandThe IP network discovery command to be executed.
Command Remarks
all Run IP network discovery for all the
gigabit ethernet interfaces in the
fabric.
noOp no operation will be performed.
interfaceSpecific Run IP network discovery incrementally
for the gigabit ethernet interface
specified in the
'cIpNetworkGigEInterfaceToDiscover',
'cIpNetworkGigEInetAddrToDiscover' and
'cIpNetworkGigESwitchWWNToDiscover'
objects.
The value of this object when read is always 'noOp'.rw Enumeration .1.3.6.1.4.1.9.9.434.1.1.10 |
cIpNetworkDiscoveryCmdStatusThe status of the last IP network discovery command
operation.
success (1) - IP network discovery operation completed
successfully.
none (2) - no IP network discovery operation is
performed.
inProgress (3) - discovery operation is in progress.
noGigEInterfaceIndexSpecified (4)
- 'ifIndex' of the gigabit eithernet interface
is not specified, i.e., the value of
'cIpNetworkGigEInterfaceToDiscover' object
is set to '0'.
noGigEInetAddrSpecified (5)
- InetAddress of the gigabit eithernet
interface is not specified, i.e., the
value of
'cIpNetworkpGigEInetAddrToDiscover' object
is set to '0'.
noGigESwitchWWNSpecified (6)
- The Switch WWN of the gigabit eithernet
interface is not specified, i.e., the value
of 'cIpNetworkGigESwitchWWNToDiscover'
object is set to '0'.
invalidGigEInterfaceIndex (7)
- 'ifIndex' of the gigabit ethernet interface
specified in the
'cIpNetworkGigEInterfaceToDiscover' object
is not valid.
invalidGigEInetAddrType (8)
- 'InetAddrType' of the gigabit ethernet
interface specified in the
'cIpNetworkGigEInetAddrType' object
is not valid.
invalidGigEInetAddr (9)
- 'InetAddr' of the gigabit ethernet
interface specified in the
'cIpNetworkGigEInetAddr' object
is not valid.
generalFailure (10)- General IP network discovery operation
Failure.ro Enumeration .1.3.6.1.4.1.9.9.434.1.1.11 |
cIpNetworkDiscoveryInfo OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.434.1.2 |
cIpNetworkTableRepresents the discovered list of all IP networks
connected to the gigabit ethernet interfaces in
the fabric.
The entries in this table are populated by the discovery
process started either by the auto discovery mechanism
or triggered by the user by the setting the
cIpNetworkDiscoveryCommand object to 'all' or
'interfaceSpecific'. SEQUENCE OF CIpNetworkEntry .1.3.6.1.4.1.9.9.434.1.2.1 |
cIpNetworkEntryAn entry represents the information about an
IP network connected to the gigabit ethernet interface
in the fabric. CIpNetworkEntry .1.3.6.1.4.1.9.9.434.1.2.1.1 |
cIpNetworkIndexAn arbitrary integer value, greater than zero which
uniquely identifies the IP Network discovered in
the fabric. Integer32 (1..65535 ) .1.3.6.1.4.1.9.9.434.1.2.1.1.1 |
cIpNetworkSwitchWWNThis object represents the WWN of the switch which has
created the corresponding entry in this table.ro FcNameId (CISCO-ST-TC) .1.3.6.1.4.1.9.9.434.1.2.1.1.2 |
cIpNetworkInterfaceTableA table consisting of entries for all the gigabit
ethernet interfaces, which are connected to the
various IP networks in the Fabric.
The members of the IP networks are dynamically
discovered by the discovery process. SEQUENCE OF CIpNetworkInterfaceEntry .1.3.6.1.4.1.9.9.434.1.2.2 |
cIpNetworkInterfaceEntryAn entry (conceptual row) in the
'cIpNetworkInterfaceTable'.
Each row represents a gigabit ethernet interface in
the fabric and its IP network. CIpNetworkInterfaceEntry .1.3.6.1.4.1.9.9.434.1.2.2.1 |
cIpNetworkGigEPortSwitchWWNThis object represents the World Wide Name (WWN) of
the associated switch in the fabric, of the gigabit
ethernet interface mentioned in corresponding instance
of 'cIpNetworkGigEPortIfIndex' object. FcNameId .1.3.6.1.4.1.9.9.434.1.2.2.1.1 |
cIpNetworkGigEPortIfIndexThis object represents the 'ifIndex' of the gigabit
ethernet interface in a switch in the fabric.
The World Wide Name (WWN) of the switch is mentioned
in the corresponding instance of
'cIpNetworkGigEPortSwitchWWN'.
The gigabit ethernet interface is connected to the IP
network represented by the value of the
corresponding instance of 'cIpNetworkIndex'. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.9.9.434.1.2.2.1.2 |
cIpNetworkGigEPortInetAddrTypeThis object represents the InetAddressType of
the gigabit ethernet interface. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.434.1.2.2.1.3 |
cIpNetworkGigEPortInetAddrThis object represents the InetAddress of the gigabit
ethernet interface mentioned in the corresponding
instance 'cIpNetworkGigEPortIfIndex' object.
The address is of the type indicated by
'cIpNetworkGigEPortInetAddrType'.
The gigabit ethernet interface is connected to the IP
network represented by the value of the
corresponding instance of 'cIpNetworkIndex'.ro InetAddress .1.3.6.1.4.1.9.9.434.1.2.2.1.4 |
cIpNetworkDiscoveryConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.434.2 |
cIpNetworkDiscoverCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.434.2.1 |
cIpNetworkDiscoveryMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.434.2.2 |