CISCO-INTERFACE-XCVR-MONITOR-MIB
AI MIB Summary
The CISCO-INTERFACE-XCVR-MONITOR-MIB enables SNMP-based monitoring of optical and electrical transceiver parameters, including optical power levels, temperature, and voltage, on Cisco interface modules. This module facilitates real-time health assessment and fault detection for pluggable transceivers to ensure link integrity and prevent hardware-induced service outages.
A MIB module that provides monitoring information about the transceivers plugged into interface on a system.
Main OID:
ciscoInterfaceXcvrMonitorMIB.1.3.6.1.4.1.9.9.706
19
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
19 total| Object Name |
|---|
ciscoInterfaceXcvrMonitorMIBA MIB module that provides monitoring information
about the transceivers plugged into interface on a
system. MODULE-IDENTITY .1.3.6.1.4.1.9.9.706 |
ciscoInterfaceXcvrMonMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.706.0 |
cIfXcvrMonStatusChangeNotifThis notification trap indicates the current status of the
alarm and warning monitoring parameters for all the sensors
based on the digital diagnostic monitoring information.
This notification is generated whenever there is a change
in the status of atleast one of the monitoring parameters
of the sensors on the transceiver in an interface. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.706.0.1 |
ciscoInterfaceXcvrMonMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.706.1 |
cIfXcvrMonDigitalDiagTempAlarmThe current status of temperature alarm flag on the
temperature sensor of the transceiver in the interface.ro CiscoInterfaceXcvrMonitorStatus .1.3.6.1.4.1.9.9.706.1.1 |
cIfXcvrMonDigitalDiagTempWarningThe current status of temperature warning flag on the
temperature sensor of the transceiver in the interface.ro CiscoInterfaceXcvrMonitorStatus .1.3.6.1.4.1.9.9.706.1.2 |
cIfXcvrMonDigitalDiagVoltAlarmThe current status of voltage alarm flag on the
voltage sensor of the transceiver in the interface.ro CiscoInterfaceXcvrMonitorStatus .1.3.6.1.4.1.9.9.706.1.3 |
cIfXcvrMonDigitalDiagVoltWarningThe current status of voltage warning flag on the
voltage sensor of the transceiver in the interface.ro CiscoInterfaceXcvrMonitorStatus .1.3.6.1.4.1.9.9.706.1.4 |
cIfXcvrMonDigitalDiagCurrAlarmThe current status of current alarm flag on the
current sensor of the transceiver in the interface.ro CiscoInterfaceXcvrMonitorStatus .1.3.6.1.4.1.9.9.706.1.5 |
cIfXcvrMonDigitalDiagCurrWarningThe current status of current warning flag on the
current sensor of the transceiver in the interface.ro CiscoInterfaceXcvrMonitorStatus .1.3.6.1.4.1.9.9.706.1.6 |
cIfXcvrMonDigitalDiagRxPwrAlarmThe current status of Rx power alarm flag on the
Rx power sensor of the transceiver in the interface.ro CiscoInterfaceXcvrMonitorStatus .1.3.6.1.4.1.9.9.706.1.7 |
cIfXcvrMonDigitalDiagRxPwrWarningThe current status of Rx power warning flag on the
Rx power sensor of the transceiver in the interface.ro CiscoInterfaceXcvrMonitorStatus .1.3.6.1.4.1.9.9.706.1.8 |
cIfXcvrMonDigitalDiagTxPwrAlarmThe current status of Tx power alarm flag on the
Tx power sensor of the transceiver in the interface.ro CiscoInterfaceXcvrMonitorStatus .1.3.6.1.4.1.9.9.706.1.9 |
cIfXcvrMonDigitalDiagTxPwrWarningThe current status of Tx power warning flag on the
Tx power sensor of the transceiver in the interface.ro CiscoInterfaceXcvrMonitorStatus .1.3.6.1.4.1.9.9.706.1.10 |
cIfXcvrMonDigitalDiagTxFaultAlarmThe current status of Tx fault count flag on the
transceiver in the interface.ro CiscoInterfaceXcvrMonitorStatus .1.3.6.1.4.1.9.9.706.1.11 |
cIfXcvrMonStatusChangeNotifEnableIndicates whether cIfXcvrMonStatusChangeNotif should be
generated.rw Enumeration .1.3.6.1.4.1.9.9.706.1.12 |
ciscoInterfaceXcvrMonMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.706.2 |
ciscoInterfaceXcvrMonMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.706.2.1 |
ciscoInterfaceXcvrMonMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.706.2.2 |