CISCO-IMAGE-UPGRADE-MIB
AI MIB Summary
The CISCO-IMAGE-UPGRADE-MIB enables SNMP-based management of Cisco modular hardware (such as line cards and controller cards) by exposing objects to query supported image types, configure target image URIs, and execute version compatibility checks or installation commands. It provides real-time monitoring of the upgrade lifecycle through status indicators, operation timestamps, and reason codes to ensure safe, staged firmware updates across specific or all system modules.
This mib provides, objects to upgrade images on modules in the system, objects showing the status of the upgrade operation, and objects showing the type of images that could be run in the system. For example the modules could be Controller card, Line card .. etc.
The system fills up the ciuImageVariableTable with the type of images the system can support. For performing an upgrade operation a management application must first read this table and use this info in other tables, as explained below. The ciuImageURITable table is also filled by the system and provides the image name presently running for each type of image in the system. The user is allowed to configure a new image name for each image type as listed in ciuImageVariableTable. The system would use this image on the particular module on the next reboot.
The management application on deciding to do an upgrade operation must first check if an upgrade operation is already in progress in the system. This is done by reading the ciuUpgradeOpCommand and if it contains 'none', signifies that no other upgrade operation is in progress. Any other value, signifies that upgrade is in progress and a new upgrade operation is not allowed. To start an 'install' operation, first the user must perform a 'check' operation to do the version compatibility for the given set of image files (provided using the ciuImageLocInputTable) against the current system configuration. Only if the result of this operation is 'success' can the user proceed to do an install operation. The tables, ciuVersionCompChkTable, ciuUpgradeImageVersionTable, ciuUpgradeOpStatusTable, provide the result of the 'check' or 'install' operation performed using ciuUpgradeOpCommand. These tables are in addition to objects ciuUpgradeOpStatus, ciuUpgradeOpTimeStarted, ciuUpgradeOpTimeCompleted, ciuUpgradeOpStatusReason. The ciuUpgradeOpStatus object provides the status of the selected upgrade operation.
An option is available for user to upgrade only some modules, provided using ciuUpgradeTargetTable. If this table is empty than an upgrade operation would be performed on all the modules in the system.
Main OID:
ciscoImageUpgradeMIB.1.3.6.1.4.1.9.9.360
71
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
71 total| Object Name |
|---|
ciscoImageUpgradeMIBThis mib provides, objects to upgrade images on modules in the
system, objects showing the status of the upgrade operation,
and objects showing the type of images that could be run in the
system. For example the modules could be Controller card, Line
card .. etc.
The system fills up the ciuImageVariableTable with the type of
images the system can support. For performing an upgrade
operation a management application must first read this table
and use this info in other tables, as explained below.
The ciuImageURITable table is also filled by the system and
provides the image name presently running for each type of
image in the system. The user is allowed to configure a new
image name for each image type as listed in
ciuImageVariableTable. The system would use this image on the
particular module on the next reboot.
The management application on deciding to do an upgrade
operation must first check if an upgrade operation is already
in progress in the system. This is done by reading the
ciuUpgradeOpCommand and if it contains 'none', signifies that
no other upgrade operation is in progress. Any other value,
signifies that upgrade is in progress and a new upgrade
operation is not allowed. To start an 'install' operation,
first the user must perform a 'check' operation to do the
version compatibility for the given set of image files
(provided using the ciuImageLocInputTable) against the
current system configuration. Only if the result of this
operation is 'success' can the user proceed to do an install
operation. The tables, ciuVersionCompChkTable,
ciuUpgradeImageVersionTable, ciuUpgradeOpStatusTable,
provide the result of the 'check' or 'install' operation
performed using ciuUpgradeOpCommand. These tables are in
addition to objects ciuUpgradeOpStatus,
ciuUpgradeOpTimeStarted, ciuUpgradeOpTimeCompleted,
ciuUpgradeOpStatusReason. The ciuUpgradeOpStatus object
provides the status of the selected upgrade operation.
An option is available for user to upgrade only some modules,
provided using ciuUpgradeTargetTable. If this table is empty
than an upgrade operation would be performed on all the
modules in the system. MODULE-IDENTITY .1.3.6.1.4.1.9.9.360 |
IMPORTSThis mib provides, objects to upgrade images on modules in the
system, objects showing the status of the upgrade operation,
and objects showing the type of images that could be run in the
system. For example the modules could be Controller card, Line
card .. etc.
The system fills up the ciuImageVariableTable with the type of
images the system can support. For performing an upgrade
operation a management application must first read this table
and use this info in other tables, as explained below.
The ciuImageURITable table is also filled by the system and
provides the image name presently running for each type of
image in the system. The user is allowed to configure a new
image name for each image type as listed in
ciuImageVariableTable. The system would use this image on the
particular module on the next reboot.
The management application on deciding to do an upgrade
operation must first check if an upgrade operation is already
in progress in the system. This is done by reading the
ciuUpgradeOpCommand and if it contains 'none', signifies that
no other upgrade operation is in progress. Any other value,
signifies that upgrade is in progress and a new upgrade
operation is not allowed. To start an 'install' operation,
first the user must perform a 'check' operation to do the
version compatibility for the given set of image files
(provided using the ciuImageLocInputTable) against the
current system configuration. Only if the result of this
operation is 'success' can the user proceed to do an install
operation. The tables, ciuVersionCompChkTable,
ciuUpgradeImageVersionTable, ciuUpgradeOpStatusTable,
provide the result of the 'check' or 'install' operation
performed using ciuUpgradeOpCommand. These tables are in
addition to objects ciuUpgradeOpStatus,
ciuUpgradeOpTimeStarted, ciuUpgradeOpTimeCompleted,
ciuUpgradeOpStatusReason. The ciuUpgradeOpStatus object
provides the status of the selected upgrade operation.
An option is available for user to upgrade only some modules,
provided using ciuUpgradeTargetTable. If this table is empty
than an upgrade operation would be performed on all the
modules in the system. Unknown .1.3.6.1.4.1.9.9.360 |
ciscoImageUpgradeMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.360.0 |
ciuUpgradeOpCompletionNotifyA ciuUpgradeOpCompletionNotify is sent at the
completion of upgrade operation denoted by
ciuUpgradeOpCommand object if such a notification
was requested when the operation was initiated.
ciuUpgradeOpCommand indicates the type of
operation. ciuUpgradeOpStatus indicates the
result of the operation. ciuUpgradeOpTimeCompleted
indicates the time when the operation is
completed. ciuUpgradeopLastCommand indicates
the previous operation that was executed.
ciuUpgradeOpLastStatus indicates the result of
previous operation. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.360.0.1 |
ciuUpgradeJobStatusNotifyA ciuUpgradeJobStatusNotify is sent when there
is status change in the upgrade process.
ciuUpgradeOpStatusOperation indicates the
operation to change the upgrade status.
ciuUpgradeOpStatusModule indicates which module
is affected. ciuUpgradeOpStatusSrcImageLoc
indicates location of source image if applicable.
ciuUpgradeOpStatusDestImageLoc indicates location
of destination image if applicable.
ciuUpgradeOpStatusJobStatus indicates the result
of this operation to change the status.
ciuUpgradeOpStatusPercentCompl indicates percentage
of the operation that has been completed.
ciuUpgradeOpStatusJobStatusReas gives explanation
of the faiure if there is a failure.
ciuUpgradeOpStatus indicates the result of the
operation at higher level.
ciuUpgradeOpStatusReason gives detailed explanation
if ciuUpgradeOpStatus is not successful. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.360.0.2 |
ciscoImageUpgradeMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.360.1 |
ciscoImageUpgradeConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.360.1.1 |
ciuTotalImageVariablesTotal number of image variables supported in
the device at this time.ro Unsigned32 .1.3.6.1.4.1.9.9.360.1.1.1 |
ciuImageVariableTableA table listing the image variable types that
exist in the device. SEQUENCE OF CiuImageVariableEntry .1.3.6.1.4.1.9.9.360.1.1.2 |
ciuImageVariableEntryA ciuImageVariableEntry entry. Each entry provides the
image variable type existing in the device. CiuImageVariableEntry .1.3.6.1.4.1.9.9.360.1.1.2.1 |
ciuImageVariableNameThe type of image that the system can run. The value of
this object depends on the underlying agent.
e.g. Let us say that the device has 3 image variables names
- 'system', 'kickstart' and 'ilce'. This table , then will
list these 3 strings as entries such as follows:
ciuImageVariableName
system
kickstart
ilce
The user can assign images (using ciuImageURITable)
to these variables and the system will use the assigned
values to boot.ro CiuImageVariableTypeName .1.3.6.1.4.1.9.9.360.1.1.2.1.1 |
ciuImageURITableA table listing the Universal Resource Identifier(URI)
of images that are assigned to variables of the
ciuImageVariableTable.
In the example for ciuImageVariableTable, there are
3 image types. This table will list the names
for those image types as follows -
entPhysicalIndex ciuImageVariableName ciuImageURI
25 'system' m9200-ek9-mgz.1.0.bin
25 'kickstart' boot-1.0.bin
26 'ilce' linecard-1.0.bin
In this example, the 'system' image name is
'm9200-ek9-mgz.1.0.bin', the 'ilce' image name is
'linecard-1.0.bin' and the 'kickstart' image name is
'boot-1.0.bin'. SEQUENCE OF CiuImageURIEntry .1.3.6.1.4.1.9.9.360.1.1.3 |
ciuImageURIEntryA ciuImageURITable entry. Each entry provides the
Image URI corresponding to this image variable name,
identified by ciuImageVariableName, on this module
identified by entPhysicalIndex. Each such module of the
type PhysicalClass module(9), has an entry
in entPhysicalTable in ENTITY-MIB, where that entry is
identified by entPhysicalIndex. Only modules capable of
running images, identified by ciuImageVariableName would
have an entry in this table. CiuImageURIEntry .1.3.6.1.4.1.9.9.360.1.1.3.1 |
ciuImageURIThis object contains the string value of the image
corresponding to ciuImageVariableName on this
entity.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.360.1.1.3.1.1 |
ciscoImageUpgradeOp OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.360.1.1.4 |
ciuUpgradeOpCommandThe command to be executed.
Note that it is possible for a system to support
only a subset of these commands. If a command is
unsupported, it will complete immediatly with the
'invalidOperation' error being reported in the
ciuUpgradeOpStatus object.
The 'check' must be performed first before 'install'
command can be executed. If 'install'
is performed first the operation would fail.
So 'install' will be allowed only if a read of
this object returns 'check' and the value of object
ciuUpgradeOpStatus is 'success'. Also 'check'
will be allowed only if a read of this object returns
'none'.
Command Remarks
none if this object is read without performing
any operation listed above, 'none' would be
returned. Also 'none' would be returned for a
read operation if a cleanup of the previous
upgrade operation is completed either through
the issue of 'done' command or the maximum
timeout of 5 minutes is elapsed. Setting this
object to 'none', agent would return a success
without any upgrade operation being performed.
done if this object returns any value other than
'none', then setting this to 'done' would do
the required cleanup of previous upgrade
operation and make the system ready for any new
upgrade operation. This is needed because the
system maintains the status of the previous
upgrade operation for a maximum time of 5 minutes
before it does the cleanup. During this period
no new upgrade operation is allowed.
install for all the physical entities listed in the
ciuUpgradeTargetTable perform the required
upgrade operation listed in that table. However
the upgrade operation for a module would not be
done if the current running image and the image
to be upgraded given as an input through the
ciuImageLocInputTable are the same.
check check the version compatibility for the given
set of image files against the current system
configuration.rw Enumeration .1.3.6.1.4.1.9.9.360.1.1.4.1 |
ciuUpgradeOpStatusThe status of the specified operation.
none(1) - no operation was performed.
invalidOperation(2) - the selected operation is not
supported.
failure(3) - the selected operation has failed.
inProgress(4) - specified operation is active.
success(5) - specified operation has completed
successfully.
abortInProgress(6) - abort in progress.
abortSuccess(7) - abort operation successful.
abortFailed(8) - abort failed.
successReset(9) - specified operation has completed
successfully and the system will
reset.
fsUpgReset(10) - fabric switch upgrade reset.ro Enumeration .1.3.6.1.4.1.9.9.360.1.1.4.2 |
ciuUpgradeOpNotifyOnCompletionSpecifies whether or not a notification should be
generated on the completion of an operation.
If 'true', ciuUpgradeOpCompletionNotify
will be generated, else if 'false' it would not be.
It is the responsibility of the management entity to
ensure that the SNMP administrative model is configured
in such a way as to allow the notification to be
delivered.
This object can only be modified alongwith
ciuUpgradeOpCommand object.This object returns default
value when ciuUpgradeOpCommand object contains
'none'. To SET this object a multivarbind set containing
this object and ciuUpgradeOpCommand must be done in the
same PDU for the operation to succeed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.360.1.1.4.3 |
ciuUpgradeOpTimeStartedSpecifies the time the upgrade operation was started.
This object would return 0 if ciuUpgradeOpCommand contains
'none'.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.9.360.1.1.4.4 |
ciuUpgradeOpTimeCompletedSpecifies the time the upgrade operation completed.
This object would return 0 if ciuUpgradeOpCommand contains
'none'.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.9.360.1.1.4.5 |
ciuUpgradeOpAbortProvides the means to abort an operation.
If this object is set to 'true' when an upgrade operation
is in progress and the corresponding instance of
ciuUpgradeOpCommand has the value 'install' or 'check',
then the operation will be aborted. Setting this
object to 'true' when ciuUpgradeOpCommand has a different
value other than 'install' or 'check' will
fail. If retrieved, this object always has the
value 'false'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.360.1.1.4.6 |
ciuUpgradeOpStatusReasonSpecifies the description of the cause of 'failed' state
of the object 'ciuUpgradeOpStatus'.
This object would be a null string if value of
'ciuUpgradeOpStatus' is anything other than
'failure'.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.360.1.1.4.7 |
ciuUpgradeOpLastCommandThis object indicates previous OpCommand value.
It will be updated after new OpCommand is set and delivered
to upgrade process.
'none' if this object is read without performing
any operation listed above, 'none' would be
returned. Also 'none' would be returned for a
read operation if a cleanup of the previous
upgrade operation is completed either through
the issue of 'done' command or the maximum
timeout of 5 minutes is elapsed. Setting this
object to 'none', agent would return a success
without any upgrade operation being performed.
'done' if this object returns any value other than
'none', then setting this to 'done' would do
the required cleanup of previous upgrade
operation and make the system ready for any new
upgrade operation. This is needed because the
system maintains the status of the previous
upgrade operation for a maximum time of 5 minutes
before it does the cleanup. During this period
no new upgrade operation is allowed.
'install' perform the required upgrade operation listed
in ciuUpgradeTargetTable table. However
the upgrade operation for a module would not be
done if the current running image and the image
to be upgraded given as an input through the
ciuImageLocInputTable are the same.
'check' check the version compatibility for the given
set of image files against the current system
configuration.ro Enumeration .1.3.6.1.4.1.9.9.360.1.1.4.8 |
ciuUpgradeOpLastStatusThis object indicates previous OpStatus value.
It will be updated after new OpCommand is set and delivered
to upgrade process.
'none' - no operation was performed.
'invalidOperation' - the selected operation is not
supported.
'failure' - the selected operation has failed.
'inProgress' - specified operation is active.
'success' - specified operation has completed
successfully.
'abortInProgress' - abort in progress.
'abortSuccess' - abort operation successful.
'abortFailed' - abort failed.
'successReset' - specified operation has completed
successfully and the system will
reset.
'fsUpgReset' - fabric switch upgrade reset.ro Enumeration .1.3.6.1.4.1.9.9.360.1.1.4.9 |
ciuUpgradeOpLastStatusReasonThis object indicates the previous OpStatusReason value.
It will be updated after new OpCommand is set and delivered
to upgrade process.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.360.1.1.4.10 |
ciuUpgradeJobStatusNotifyOnCompletionThis object specifies whether or not
ciuUpgradeJobStatusCompletionNotify notification
should be generated on the completion of an operation.
If 'true', ciuUpgradeJobStatusCompletionNotify
will be generated, else if 'false' it would not be.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.360.1.1.4.11 |
ciuUpgradeTargetTableA table listing the modules and the type of upgrade
operation to be performed on these modules. SEQUENCE OF CiuUpgradeTargetEntry .1.3.6.1.4.1.9.9.360.1.1.5 |
ciuUpgradeTargetEntryEach entry provides the module that needs to be
upgraded and the type of operation that needs to be
performed on this module. The upgrade operation, selected
using the object 'ciuUpgradeOpCommand', would be performed
on each and every module represented by an entry in this
table. Each such module of the type PhysicalClass
module(9), has an entry in entPhysicalTable in ENTITY-MIB,
where that entry is identified by entPhysicalIndex.
Only modules capable of running images, identified by
ciuImageVariableName would have an entry in this table.
This table cannot be modified when ciuUpgradeOpCommand
object contains value other than 'none'. CiuUpgradeTargetEntry .1.3.6.1.4.1.9.9.360.1.1.5.1 |
ciuUpgradeTargetActionThe type of operation to be performed on this module.
image - upgrade image.
bios - upgrade bios.
loader - upgrade loader.loader is the program that
loads and starts the operating system
bootrom - upgrade boot rom
This object cannot be modified while the corresponding
value of ciuUpgradeTargetEntryStatus is equal to
'active'. It is okay to support only a subset of the enums
defined above.rw Enumeration .1.3.6.1.4.1.9.9.360.1.1.5.1.1 |
ciuUpgradeTargetEntryStatusThe status of this table entry. A multivarbind set
containing this object and ciuUpgradeTargetAction must
be done in the same PDU for the operation to succeed.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.360.1.1.5.1.2 |
ciuImageLocInputTableA table listing the URI of the images that need to
be upgraded. SEQUENCE OF CiuImageLocInputEntry .1.3.6.1.4.1.9.9.360.1.1.6 |
ciuImageLocInputEntryEach entry provides the image location URI that need to be
upgraded.
This table cannot be modified if ciuUpgradeOpCommand object
contains any value other than 'none' CiuImageLocInputEntry .1.3.6.1.4.1.9.9.360.1.1.6.1 |
ciuImageLocInputURIAn ASCII string specifying the system image location.
For example the string could be 'bootflash:file1'.
This object cannot be modified while the corresponding
value of ciuImageLocInputEntryStatus is equal to
'active'.rw SnmpAdminString .1.3.6.1.4.1.9.9.360.1.1.6.1.1 |
ciuImageLocInputEntryStatusThe status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.360.1.1.6.1.2 |
ciuVersionCompChkTableA table showing the result of the version compatibility
check operation performed in response to the option
'check' selected for ciuUpgradeOpCommand.
The table would be emptied out once the value of
ciuUpgradeOpCommand object is 'none'. SEQUENCE OF CiuVersionCompChkEntry .1.3.6.1.4.1.9.9.360.1.1.7 |
ciuVersionCompChkEntryAn entry containing the results of the version
compatibility check operation performed on each module,
identified by entPhysicalIndex.
Each such module of the type PhysicalClass
module(9), has an entry in entPhysicalTable in ENTITY-MIB,
where that entry is identified by entPhysicalIndex.
Only modules capable of running images, identified by
ciuImageVariableName would have an entry in this table. CiuVersionCompChkEntry .1.3.6.1.4.1.9.9.360.1.1.7.1 |
ciuVersionCompImageSameSpecifies whether for this module the image provided by
the user for upgrade is same as the current running image.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.360.1.1.7.1.1 |
ciuVersionCompUpgradableSpecifies whether the set of images provided in
ciuImageLocInputTable are compatible with each other as
far as this module is concerned. If 'true' the set of
images provided are compatible and can be run on this
module else they are not compatible. This module would not
come up if it is booted with a uncompatible set of image.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.360.1.1.7.1.2 |
ciuVersionCompUpgradeActionSpecifies the type of upgrade action that would be
performed on this module if ciuUpgradeOpCommand were
set to 'install' or to 'check'.
none(1) : is no upgrade action.
other(2) : actions other than defined here
rollingUpgrade(3) : modules would be upgraded one at a
time.
switchOverReset(4): all the modules would be reset after
a switchover happens at the same time.
reset(5) : all the modules would be reset without
or before a switchover.
copy(6) : then image upgrade would not be done,
but only bios/loader/bootrom would be
updated and will take effect on next
reload.
notApplicable(7) : upgrade action is not possible
because image is not upgradable.
plugin(8) : upgrading plugin only instead of full
image.ro Enumeration .1.3.6.1.4.1.9.9.360.1.1.7.1.3 |
ciuVersionCompUpgradeBiosSpecifies whether the BIOS will be upgraded.
If 'true' the bios would be upgraded else it would not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.360.1.1.7.1.4 |
ciuVersionCompUpgradeBootromSpecifies whether the bootrom will be upgraded.
If 'true' the bootrom would be upgraded else it would not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.360.1.1.7.1.5 |
ciuVersionCompUpgradeLoaderSpecifies whether the loader will be upgraded.
If 'true' the loader would be upgraded else it would not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.360.1.1.7.1.6 |
ciuVersionCompUpgradeImpactSpecifies the impact of the upgrade operation that
would have on this module.
other(1) : reasons other than defined here
nonDisruptive(2): this module would be upgraded
without disruption of traffic.
disruptive(3) : this module would be upgraded
with disruption of traffic.
notApplicable(4): upgrade is not possible because image
is not upgradable.ro Enumeration .1.3.6.1.4.1.9.9.360.1.1.7.1.7 |
ciuVersionCompUpgradeReasonThis object would give the reason for the following cases:
1)value of object ciuVersionCompUpgradable is 'false'
then it would give the reason why the module is not
upgradable.
2)the value of object ciuversionCompUpgradeAction is either
'switchOverReset' or 'reset' and value of object
ciuVersionCompUpgradable is 'true'.
3)the value of object ciuVersionCompUpgradeImpact is
'disruptive' and value of objects, ciuVersionCompUpgradable
is 'true' and ciuversionCompUpgradeAction is neither
'switchOverReset' nor 'reset.
This object would have the reason in the above listed
order.
It would be a null string for all the other values of the
above mentioned objects.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.360.1.1.7.1.8 |
ciuUpgradeImageVersionTableA table showing the current version of images running
on the modules and the images they would be upgraded with.
The table would be emptied out once the value of
ciuUpgradeOpCommand object is 'none'. This table becomes
valid when value of ciuUpgradeOpStatus is 'success'
in response to 'check' operation selected using
ciuUpgradeOpCommand. SEQUENCE OF CiuUpgradeImageVersionEntry .1.3.6.1.4.1.9.9.360.1.1.8 |
ciuUpgradeImageVersionEntryAn entry containing the current version of image running
on a particular module and the images they would be
upgraded with.
An ciuUpgradeImageVersionVarName identifies the type of
software running on this module, identified by
entPhysicalIndex. It is possible that the
same module, identified by entPhysicalIndex,
can run multiple instances of the software type identified
by ciuUpgradeImageVersionVarName.
Each such module of the type PhysicalClass
module(9), has an entry in entPhysicalTable in ENTITY-MIB,
where that entry is identified by entPhysicalIndex.
Only modules capable of running images, identified by
ciuImageVariableName would have an entry in this table. CiuUpgradeImageVersionEntry .1.3.6.1.4.1.9.9.360.1.1.8.1 |
ciuUpgradeImageVersionIndexThis is an arbitrary integer which uniquely identifies
different rows which have the same value of
entPhysicalIndex. Unsigned32 .1.3.6.1.4.1.9.9.360.1.1.8.1.1 |
ciuUpgradeImageVersionVarNameThe type of image on this module.ro CiuImageVariableTypeName .1.3.6.1.4.1.9.9.360.1.1.8.1.2 |
ciuUpgradeImageVersionRunningAn ASCII string specifying the running image version.ro SnmpAdminString .1.3.6.1.4.1.9.9.360.1.1.8.1.3 |
ciuUpgradeImageVersionNewAn ASCII string specifying what the new image version
would be after an upgrade.ro SnmpAdminString .1.3.6.1.4.1.9.9.360.1.1.8.1.4 |
ciuUpgradeImageVersionUpgReqdSpecifies whether an upgrade is required for this
software component, identified by entPhysicalIndex and
ciuUpgradeImageVersionVarName.
If the value of objects ciuUpgradeImageVersionRunning and
ciuUpgradeImageVersionNew are same then the value of this
object would be 'false' else it would be 'true'.
If 'true' then this software component, identified by
ciuUpgradeImageVersionVarName needs to be upgraded else
it would not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.360.1.1.8.1.5 |
ciuUpgradeOpStatusTableA table showing the result of the upgrade operation
selected from ciuUpgradeOpCommand in ciuUpgradeOpTable.
The table would be emptied out once the value of
ciuUpgradeOpCommand object is 'none'. SEQUENCE OF CiuUpgradeOpStatusEntry .1.3.6.1.4.1.9.9.360.1.1.9 |
ciuUpgradeOpStatusEntryAn entry containing the status of the upgrade operation. CiuUpgradeOpStatusEntry .1.3.6.1.4.1.9.9.360.1.1.9.1 |
ciuUpgradeOpStatusOperIndexThis is an arbitrary integer which identifies uniquely
an entry in this table. Unsigned32 .1.3.6.1.4.1.9.9.360.1.1.9.1.1 |
ciuUpgradeOpStatusOperationSpecifies the operation that is currently in progress
or completed in response to the ciuUpgradeOpCommand.
'unknown' - operation status unknown.
'other' - operation status other than defined here.
'copy' - the image is being copied from
ciuUpgradeOpStatusSrcImageLoc to
ciuUpgradeOpStatusDestImageLoc.
'verify' - copied images are being verified for checksum
and input consistency.
'versionExtraction' - extracting the version info from
image.
'imageSync' - Syncing image to the standby supervisor,
if standby supervisor exists.
'configSync' - saving running configuration to startup
configuration and syncing it to standby
supervisor, if it exists.
'preUpgrade' - Upgrading Bios/loader/bootrom
'forceDownload' - This module is being force downloaded.
'moduleOnline' - waiting for this module to come online
'hitlessLCUpgrade' - Upgrading hitless
'hitfulLCUpgrade' - Upgrading hitful
'unusedBootvar' - The image variable name type supplied
as input for upgrade operation is
unused.
'convertStartUp' - converting the startup config.
'looseIncompatibility' - incomplete support for current
running config in the new image.
'haSeqNumMismatch' - High availability sequence number
mismatch, so the module will be
power cycled.
'unknownModuleOnline' - this module was powered down
before switchover and has now
come online.
'recommendedAction' - Specifies the recommended action if
upgrading operation fails. If this
object value is 'recommendedAction'
then the object
'ciuUpgradeOpStatusSrcImageLoc'
would contain the string specifying
the recommended action.
'recoveryAction' - Specifies that installer is doing
a recovery because of install
failure. If this object value is
'recoveryAction' then the object
'ciuUpgradeOpStatusSrcImageLoc'
would contain the string specifying
the recovery action.
'remainingAction' - Specifies the remaining actions
that have not been performed due
to install failure. If this object
value is 'remainingAction' then
the object
'ciuUpgradeOpStatusSrcImageLoc'
would contain the information
about the remaining actions.
'additionalInfo' - Specifies the additional info
the installer conveys to the user.
If this object value is
'additionalInfo' then
the object
'ciuUpgradeOpStatusSrcImageLoc'
would contain the information.
'settingBootvars' - setting the boot variables.
'informLcmFsUpg' - save linecard runtime state.
'sysmgrSaveRuntimeStateAndSuccessReset' - save supervisor
runtime state and terminate all
services.
'kexecLoadUpgImages' - load upgrade images into memory.
'fsUpgCleanup' - cleanup file system for upgrade.
'saveMtsState' - saving persistent transaction
messages.
'fsUpgBegin' - notify services that upgrade is
about to begin.
'lcWarmBootStatus' - linecard upgrade status.
'waitStateVerificationStatus' - supervisor state
verification with the new image.
'informLcmFsUpgExternalLc' - save external linecard runtime
state.
'externalLcWarmBootStatus' - external linecard upgrade
status.
'total' - total.
'compactFlashTcamSanity' - compact flash and TCAM sanity
test.
'systemPreupgradeBegin' - notify services of beginning of
upgrade.ro Enumeration .1.3.6.1.4.1.9.9.360.1.1.9.1.2 |
ciuUpgradeOpStatusModuleThe physical entity of the module for which this
status is being shown. For example such an entity is one of
the type PhysicalClass module(9). This object must contain
the same value as the entPhysicalIndex of the physical
entity from entPhysicalTable in ENTITY-MIB.ro EntPhysicalIndexOrZero (CISCO-TC) .1.3.6.1.4.1.9.9.360.1.1.9.1.3 |
ciuUpgradeOpStatusSrcImageLocAn ASCII string specifying the source image location.
For example the string could be 'bootflash:file1'.
This object is only valid if the value of
ciuUpgradeOpStatusOperation is 'copy'.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.360.1.1.9.1.4 |
ciuUpgradeOpStatusDestImageLocAn ASCII string specifying the destination image location.
For example the string could be 'bootflash:file1'.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.360.1.1.9.1.5 |
ciuUpgradeOpStatusJobStatusThe status of this operation.
'unknown' - operation status unknown.
'other' - operation status other than defined here.
'failed' - this operation has failed
'inProgress' - this operation is active
'success' - this operation has completed successfully.
'planned' - this operation would be executed at later
point of time.ro Enumeration .1.3.6.1.4.1.9.9.360.1.1.9.1.6 |
ciuUpgradeOpStatusPercentComplThe percentage completion of the upgrade operation
selected from ciuUpgradeOpTable.
If this object is invalid for a particular operation,
identified by ciuUpgradeOpStatusOperation, then the
value of this object would be -1.ro Integer32 .1.3.6.1.4.1.9.9.360.1.1.9.1.7 |
ciuUpgradeOpStatusJobStatusReasSpecifies the description of the cause of 'failed' state
of the object 'ciuUpgradeOpStatusJobStatus'.
This object would be a null string if value of
'ciuUpgradeOpStatusJobStatus' is anything other than
'failed'.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.360.1.1.9.1.8 |
ciscoImageUpgradeMisc OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.360.1.1.10 |
ciuUpgradeMiscAutoCopySpecifies whether or not the images on the
active supervisor will be copied to the
standby supervisor, if the standby supervisor
exists. If the standby supervisor does not
exist, the setting of this object to 'true'
will not have any effect and no image copy
will be done.
ciuImageURITable lists all the images for the
supervisor cards as well as the line cards.
If this object is set to 'true', all the images
pointed to by the instances of ciuImageURI will be
automatically copied to the standby supervisor.
For example, assume that the ciuImageURITable looks
like below -
entPhysicalIndex ciuImageVariableName ciuImageURI
25 'system' bootflash://image.bin
25 'kickstart' slot0://boot.bin
26 'ilce' bootflash://linecard.bin
So, if the ciuUpgradeMiscAutoCopy is 'true', then
bootflash://image.bin from the active supervisor will
be copied to the bootflash://image.bin on the
standby supervisor; slot0://boot.bin will be copied
to the slot0://boot.bin on the standby supervisor etc.
If this object is set to 'false' then this copying
of the images will not be done.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.360.1.1.10.1 |
ciuUpgradeMiscInfoTableA table showing additional information such as warnings
during upgrade.
The table would be emptied out once the value of
ciuUpgradeOpCommand object is 'none'. SEQUENCE OF CiuUpgradeMiscInfoEntry .1.3.6.1.4.1.9.9.360.1.1.11 |
ciuUpgradeMiscInfoEntryAn entry containing additional information of upgrade
operation being performed on modules.
Each entry is uniquely identified by
ciuUpgradeMiscInfoIndex. If the info given in object
ciuUpgradeMiscInfoDescr is not for any module then
the value of ciuUpgradeMiscInfoModule would be 0. CiuUpgradeMiscInfoEntry .1.3.6.1.4.1.9.9.360.1.1.11.1 |
ciuUpgradeMiscInfoIndexThis is an arbitrary integer which identifies uniquely
an entry in this table. Unsigned32 .1.3.6.1.4.1.9.9.360.1.1.11.1.1 |
ciuUpgradeMiscInfoModuleThe entPhysicalIndex of the module. The value of this
object would be 0 if the information shown in
ciuUpgradeMiscInfoDescr is not for any module.ro EntPhysicalIndexOrZero (CISCO-TC) .1.3.6.1.4.1.9.9.360.1.1.11.1.2 |
ciuUpgradeMiscInfoDescrSpecifies the miscelleneous information of the
upgrade operation.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.360.1.1.11.1.3 |
ciscoImageUpgradeMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.360.2 |
ciuImageUpgradeCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.360.2.1 |
ciuImageUpgradeGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.360.2.2 |