CISCO-IF-CALL-SERVICE-MIB
AI MIB Summary
The CISCO-IF-CALL-SERVICE-MIB monitors call service state variables and session status for network interfaces on Cisco media gateways. It provides granular visibility into the operational state of voice and signaling services traversing specific gateway ports.
The MIB is used to manage call service state for interfaces on media gateway.
Main OID:
ciscoIfCallServiceMIB.1.3.6.1.4.1.9.9.9968
16
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
16 total| Object Name |
|---|
ciscoIfCallServiceMIBThe MIB is used to manage call service state
for interfaces on media gateway. MODULE-IDENTITY .1.3.6.1.4.1.9.9.9968 |
SNMPv2-CONFThe MIB is used to manage call service state
for interfaces on media gateway. Unknown .1.3.6.1.4.1.9.9.9968 |
ciscoIfCallServiceMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.9968.0 |
ciscoIfCallServiceMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.9968.1 |
cicServiceConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.9968.1.1 |
cicServiceTableThis table defines the parameters related to the
call service state administration for the
interfaces on media gateway. The possible interfaces
include channelized sonet interface, DS1 interface,
etc.. SEQUENCE OF CicServiceEntry .1.3.6.1.4.1.9.9.9968.1.1.1 |
cicServiceEntryAn entry containing service administration information
applicable to a particular interface. CicServiceEntry .1.3.6.1.4.1.9.9.9968.1.1.1.1 |
cicServiceOperStateThis object indicates the current operating state of
the service in the interface.
The entry in this table is also in ifTable(the index of this
table is ifIndex). The 'cicServiceOperState' of the entry is
not only dependent on the 'cicServiceAdminState', it is also
dependent on the 'ifOperStatus' of ifTable.
The following is the relationship between
'cicServiceAdminState' and 'ifOperStatus':
cicServiceOperState cicServiceAdminState ifOperStatus
-
inService inService up
outOfService forcefulOutOfService up
oosPending gracefulOutOfService up
outOfService inService down
outOfService forcefulOutOfService down
outOfService gracefulOutOfService downro CIfCallServiceOperState .1.3.6.1.4.1.9.9.9968.1.1.1.1.1 |
cicServiceAdminStateThis object is used to change the desired service state
of the interface. The operational service state of the
interface is indicated by 'cicServiceOperState'.rw CIfCallServiceAdminState .1.3.6.1.4.1.9.9.9968.1.1.1.1.2 |
cicServiceGraceTimeThis object specifies the amount of time before the
existing call connections been gracefully shutdown in
the interface when 'cicServiceAdminState'
is set to 'gracefulOutOfService'.
This object is not applicable if 'cicServiceAdminState'
is set to 'forcefulOutOfService'.
The value of 0 specifies that the service on the interface
will not be put outOfService until the call connection over
the interface is terminated.rw Unsigned32 .1.3.6.1.4.1.9.9.9968.1.1.1.1.3 |
cicServiceRepetitionThis object is used to change service state to multiple
interfaces by repeatedly applying the writable
objects of cicServiceTable specified in the same
SNMP PDU starting from the row specified by the instance
value in INDEX for the number of rows specified in this
object.
The order of operation is iterated through the logical
order of the interface. Whether the iteration will
be applied across the physical boundary or not is depends
upon the system implementation.
The GET operation on this object will always return 1.rw ConfigIterator (CISCO-TC) .1.3.6.1.4.1.9.9.9968.1.1.1.1.4 |
cicServiceRepeatOwnerThis object is used for error checking of the operation
specified in 'cicServiceRepetition'.
The value of this object is set by the SNMP manager
with its own identifier at the same time as issuing the bulk
operation by setting 'cicServiceRepetition'. This object and
'cicServiceRepetition' need to be in the same SNMP SET PDU.
Later on, the SNMP manager should check the value of this
object, if it is same as the name previously set, then
the value of 'cicServiceRepeatResult' indicates the result
of the bulk operation initiated by this SNMP manager.
In the case that a SNMP manager do multi bulk operation,
it is recommended that the SNMP manager choose to set this
value to its IP Address so as to be unique.rw OwnerString (RMON-MIB) .1.3.6.1.4.1.9.9.9968.1.1.1.1.5 |
cicServiceRepeatResultThis object is used for error checking of the operation
specified in cicServiceRepetition.
This object indicates the result of the bulk operation
initiated by the SNMP manager specified in the value of
'cicServiceRepeatOwner'.ro BulkConfigResult (CISCO-TC) .1.3.6.1.4.1.9.9.9968.1.1.1.1.6 |
ciscoIfCallServiceMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.9968.2 |
cicServiceCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.9968.2.1 |
cicServiceGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.9968.2.2 |