CISCO-IETF-VPLS-LDP-MIB
AI MIB Summary
The CISCO-IETF-VPLS-LDP-MIB provides management definitions for monitoring LDP-signaled Virtual Private LAN Services (VPLS) and associated pseudo-wire states on Cisco IOS and IOS-XE platforms. It enables the tracking of VPLS instance parameters, LDP session states, and pseudo-wire connectivity metrics across underlying transport networks.
This MIB module contains managed object definitions for LDP signalled Virtual Private LAN Services as in [L2VPN-VPLS-LDP]
This MIB module enables the use of any underlying Pseudo Wire network.
This MIB is based on the following IETF document.
http://www1.tools.ietf.org/html/draft-nadeau-l2vpn-vpls-mib-03
Main OID:
cvplsLdpMIB.1.3.6.1.4.1.9.10.141
11
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
11 total| Object Name |
|---|
cvplsLdpMIBThis MIB module contains managed object definitions for
LDP signalled Virtual Private LAN Services as in
[L2VPN-VPLS-LDP]
This MIB module enables the use of any underlying Pseudo Wire
network.
This MIB is based on the following IETF document.
http://www1.tools.ietf.org/html/draft-nadeau-l2vpn-vpls-mib-03 MODULE-IDENTITY .1.3.6.1.4.1.9.10.141 |
cvplsLdpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.141.1 |
cvplsLdpConfigTableThis table specifies information for configuring
and monitoring LDP specific parameters for
Virtual Private Lan Services(VPLS). SEQUENCE OF CvplsLdpConfigEntry .1.3.6.1.4.1.9.10.141.1.1 |
cvplsLdpConfigEntryA row in this table represents LDP specific information
for Virtual Private Lan Service(VPLS) in a packet network.
It is indexed by cvplsConfigIndex, which uniquely
identifies a single VPLS.
A row is automatically created when a VPLS service is
configured using LDP signalling.
None of the read-create objects values can be
changed when cvplsRowStatus is in the active(1)
state. Changes are allowed when the cvplsRowStatus
is in notInService(2) or notReady(3) states only.
If the operator need to change one of the values
for an active row the cvplsConfigRowStatus should be
first changed to notInService(2), the objects may
be changed now, and later to active(1) in order to
re-initiate the signaling process with the new
values in effect. CvplsLdpConfigEntry .1.3.6.1.4.1.9.10.141.1.1.1 |
cvplsLdpConfigMacAddrWithdrawThis object specifies if MAC address withdrawl is
enabled in this service. If this object is true then
Mac address withdrawl Learning is enabled. If false,
then Mac Learning is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.10.141.1.1.1.1 |
cvplsLdpPwBindTableThis table provides LDP specific information for
an association between a VPLS service and the
corresponding Pseudo Wires. A service can have more
than one Pseudo Wire association. Pseudo Wires are
defined in the cpwTable. SEQUENCE OF CvplsLdpPwBindEntry .1.3.6.1.4.1.9.10.141.1.2 |
cvplsLdpPwBindEntryEach row represents an association between a
VPLS instance and one or more Pseudo Wires
defined in the cpwTable. Each index is unique
in describing an entry in this table. However
both indexes are required to define the one
to many association of service to pseudowire.
An entry in this table is instantiated only when
LDP signalling is used to configure VPLS service.
Each entry in this table provides LDP specific
information for the VPlS represented by
cvplsConfigIndex. CvplsLdpPwBindEntry .1.3.6.1.4.1.9.10.141.1.2.1 |
cvplsLdpPwBindMacAddressLimitThe value of this object specifies the maximum number
of learned and static entries allowed in the
Forwarding database for this PW Binding. The value 0
means there is no limit for this PW Binding.rw Unsigned32 .1.3.6.1.4.1.9.10.141.1.2.1.1 |
cvplsLdpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.141.2 |
cvplsLdpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.141.2.1 |
cvplsLdpGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.141.2.2 |