CISCO-IETF-MSDP-MIB
AI MIB Summary
The CISCO-IETF-MSDP-MIB enables monitoring and management of Cisco IOS devices running Multicast Source Discovery Protocol (MSDP) by exposing session states, peer relationships, and multicast source registration counters. This module facilitates the tracking of MSDP SA (Source-Active) message exchanges and peer connectivity status to ensure proper inter-domain multicast routing functionality.
An experimental MIB module for MSDP Management and Monitoring. Version draft-ietf-mboned-msdp-mib-01.txt is ciscoized
Main OID:
ciscoIetfMsdpMIB.1.3.6.1.4.1.9.10.130
69
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
69 total| Object Name |
|---|
ciscoIetfMsdpMIBAn experimental MIB module for MSDP Management
and Monitoring.
Version draft-ietf-mboned-msdp-mib-01.txt is
ciscoized MODULE-IDENTITY .1.3.6.1.4.1.9.10.130 |
cMsdpMIBobjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.130.1 |
cMsdp OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.130.1.1 |
cMsdpTraps OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.130.1.1.0 |
cMsdpEstablishedThe MSDP Established event is generated when the MSDP FSM
enters the ESTABLISHED state. NOTIFICATION-TYPE .1.3.6.1.4.1.9.10.130.1.1.0.1 |
cMsdpBackwardTransitionThe MSDPBackwardTransition Event is generated when the MSDP
FSM moves from a higher numbered state to a lower numbered
state. NOTIFICATION-TYPE .1.3.6.1.4.1.9.10.130.1.1.0.2 |
cMsdpEnabledThe state of MSDP on this MSDP speaker - globally enabled or
disabled.
Changes to this object should be stored to non-volatile
memory.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.10.130.1.1.1 |
cMsdpCacheLifetimeThe lifetime given to SA cache entries when created or
refreshed. This is the [SA-State-Period] in the MSDP spec.
A value of 0 means no SA caching is done by this MSDP
speaker.
Changes to this object should be stored to non-volatile
memory.
This object does not measure time per se; instead, it is the
delta from the time at which an SA message is received at
which it should be expired if not refreshed. (i.e., it is
the value of cMsdpSACacheExpiryTime immediately after
receiving an SA message applying to that row.) As such,
TimeInterval would be a more appropriate SYNTAX; it remains
TimeTicks for backwards compatability.rw TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.9.10.130.1.1.2 |
cMsdpNumSACacheEntriesThe total number of entries in the SA Cache table.ro Gauge32 .1.3.6.1.4.1.9.10.130.1.1.3 |
cMsdpRequestsTableThe (conceptual) table listing group ranges and MSDP peers
used when deciding where to send an SA Request message when
required. If SA Requests are not enabled, this table may be
empty.
In order to choose a peer to whom to send an SA Request for
a given group G, the subset of entries in this table whose
(cMsdpRequestsPeerType, cMsdpRequestsPeer) tuple represents a
peer whose cMsdpPeerState is established are examined. The
set is further reduced by examining only those entries for
which cMsdpPeerRequestsGroupAddressType equals the address
type of G, and the entries with the highest value of
cMsdpRequestsGroupPrefix are considered, where the group G
falls within the range described by the combination of
cMsdpRequestsGroup and cMsdpRequestsGroupPrefix. (This
sequence is commonly known as a 'longest-match' lookup.)
Finally, if multiple entries remain, the entry with the
lowest value of cMsdpRequestsPriority is chosen. The SA
Request message is sent to the peer described by this row.deprecated SEQUENCE OF CMsdpRequestsEntry .1.3.6.1.4.1.9.10.130.1.1.4 |
cMsdpRequestsEntryAn entry (conceptual row) representing a group range used
when deciding where to send an SA Request message.deprecated CMsdpRequestsEntry .1.3.6.1.4.1.9.10.130.1.1.4.1 |
cMsdpRequestsGroupAddressThe group address that, when combined with the mask in this
entry, represents the group range to which this row
applies.deprecated IpAddress .1.3.6.1.4.1.9.10.130.1.1.4.1.1 |
cMsdpRequestsGroupMaskThe mask that, when combined with the group address in this
entry, represents the group range to which this row
applies.deprecated IpAddress .1.3.6.1.4.1.9.10.130.1.1.4.1.2 |
cMsdpRequestsPeerThe peer to which MSDP SA Requests for groups matching this
entry's group range will be sent. This object combined with
cMsdpRequestsPeerType must match the INDEX of a row in the
cMsdpPeerTable, and to be considered, this peer's
cMsdpPeerState must be established.rwdeprecated IpAddress .1.3.6.1.4.1.9.10.130.1.1.4.1.3 |
cMsdpRequestsStatusThe status of this row, by which new rows may be added to
the table or old rows may be deleted.rwdeprecated RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.10.130.1.1.4.1.4 |
cMsdpPeerTableThe (conceptual) table listing the MSDP speaker's peers. SEQUENCE OF CMsdpPeerEntry .1.3.6.1.4.1.9.10.130.1.1.5 |
cMsdpPeerEntryAn entry (conceptual row) representing an MSDP peer.
If row creation is supported, dynamically added rows are
added to the system's stable configuration (corresponding to
a StorageType value of nonVolatile). CMsdpPeerEntry .1.3.6.1.4.1.9.10.130.1.1.5.1 |
cMsdpPeerRemoteAddressThe address of the remote MSDP peer. IpAddress .1.3.6.1.4.1.9.10.130.1.1.5.1.1 |
cMsdpPeerStateThe state of the MSDP TCP connection with this peer.ro Enumeration .1.3.6.1.4.1.9.10.130.1.1.5.1.3 |
cMsdpPeerRPFFailuresThe number of SA messages received from this peer which
failed the Peer-RPF check.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
cMsdpPeerDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.9.10.130.1.1.5.1.4 |
cMsdpPeerInSAsThe number of MSDP SA messages received on this connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
cMsdpPeerDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.9.10.130.1.1.5.1.5 |
cMsdpPeerOutSAsThe number of MSDP SA messages transmitted on this
connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
cMsdpPeerDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.9.10.130.1.1.5.1.6 |
cMsdpPeerInSARequestsThe number of MSDP SA-Request messages received on this
connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
cMsdpPeerDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.9.10.130.1.1.5.1.7 |
cMsdpPeerOutSARequestsThe number of MSDP SA-Request messages transmitted on this
connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
cMsdpPeerDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.9.10.130.1.1.5.1.8 |
cMsdpPeerInSAResponsesThe number of MSDP SA-Response messages received on this
connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
cMsdpPeerDiscontinuityTime.rodeprecated Counter32 .1.3.6.1.4.1.9.10.130.1.1.5.1.9 |
cMsdpPeerOutSAResponsesThe number of MSDP SA Response messages transmitted on this
TCP connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
cMsdpPeerDiscontinuityTime.rodeprecated Counter32 .1.3.6.1.4.1.9.10.130.1.1.5.1.10 |
cMsdpPeerInControlMessagesThe total number of MSDP messages, excluding encapsulated
data packets, received on this TCP connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
cMsdpPeerDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.9.10.130.1.1.5.1.11 |
cMsdpPeerOutControlMessagesThe total number of MSDP messages, excluding encapsulated
data packets, transmitted on this TCP connection.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
cMsdpPeerDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.9.10.130.1.1.5.1.12 |
cMsdpPeerInDataPacketsThe total number of encapsulated data packets received from
this peer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
cMsdpPeerDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.9.10.130.1.1.5.1.13 |
cMsdpPeerOutDataPacketsThe total number of encapsulated data packets sent to this
peer.
Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other
times as indicated by the value of
cMsdpPeerDiscontinuityTime.ro Counter32 .1.3.6.1.4.1.9.10.130.1.1.5.1.14 |
cMsdpPeerFsmEstablishedTransitionsThe total number of times the MSDP FSM transitioned into the
ESTABLISHED state.ro Counter32 .1.3.6.1.4.1.9.10.130.1.1.5.1.15 |
cMsdpPeerFsmEstablishedTimeThis timestamp is set to the value of sysUpTime when a peer
transitions into or out of the ESTABLISHED state. It is set
to zero when the MSDP speaker is booted.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.10.130.1.1.5.1.16 |
cMsdpPeerInMessageTimeThe sysUpTime value when the last MSDP message was received
from the peer. It is set to zero when the MSDP speaker is
booted.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.10.130.1.1.5.1.17 |
cMsdpPeerLocalAddressThe local IP address used for this entry's MSDP TCP
connection.rw IpAddress .1.3.6.1.4.1.9.10.130.1.1.5.1.18 |
cMsdpPeerConnectRetryIntervalTime interval in seconds for the [ConnectRetry-period] for
this peer.rw Integer32 .1.3.6.1.4.1.9.10.130.1.1.5.1.20 |
cMsdpPeerHoldTimeConfiguredTime interval in seconds for the [HoldTime-Period]
configured for this MSDP speaker with this peer. If the
value of this object is zero (0), the MSDP connection is
never torn down due to the absence of messages from the
peer.rw Integer32 (0|3..65535) UNITS "seconds" .1.3.6.1.4.1.9.10.130.1.1.5.1.21 |
cMsdpPeerKeepAliveConfiguredTime interval in seconds for the [KeepAlive-Period]
configured for this MSDP speaker with this peer. If the
value of this object is zero (0), no periodic KEEPALIVE
messages are sent to the peer after the MSDP connection has
been established.rw Integer32 (0|1..21845) UNITS "seconds" .1.3.6.1.4.1.9.10.130.1.1.5.1.22 |
cMsdpPeerDataTtlThe minimum TTL a packet is required to have before it may
be forwarded using SA encapsulation to this peer.rw Integer32 .1.3.6.1.4.1.9.10.130.1.1.5.1.23 |
cMsdpPeerProcessRequestsFromThis object indicates whether or not to process MSDP SA
Request messages from this peer. If True(1), MSDP SA
Request messages from this peer are processed and replied to
(if appropriate) with SA Response messages. If False(2),
MSDP SA Request messages from this peer are silently
ignored. It defaults to False when cMsdpCacheLifetime is 0
and True when cMsdpCacheLifetime is non-0.
This object is deprecated because MSDP SA Requests were
removed from the MSDP specification.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.10.130.1.1.5.1.24 |
cMsdpPeerStatusThe RowStatus object by which peers can be added and
deleted. A transition to 'active' will cause the MSDP
'Enable MSDP peering with P' Event to be generated. A
transition out of the 'active' state will cause the MSDP
'Disable MSDP peering with P' Event to be generated. Care
should be used in providing write access to this object
without adequate authentication.
cMsdpPeerRemoteAddress is the only variable that must be set
to a valid value before the row can be activated. Since
this is the table's INDEX, a row can be activated by simply
setting the cMsdpPeerStatus variable.
It is possible to modify other columns in the same
conceptual row when the status value is active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.10.130.1.1.5.1.25 |
cMsdpPeerRemotePortThe remote port for the TCP connection between the MSDP
peers.ro Integer32 .1.3.6.1.4.1.9.10.130.1.1.5.1.26 |
cMsdpPeerLocalPortThe local port for the TCP connection between the MSDP
peers.ro Integer32 .1.3.6.1.4.1.9.10.130.1.1.5.1.27 |
cMsdpPeerEncapsulationTypeThe encapsulation in use when encapsulating data in SA
messages to this peer.rw Enumeration .1.3.6.1.4.1.9.10.130.1.1.5.1.29 |
cMsdpPeerConnectionAttemptsThe number of times the state machine has transitioned from
INACTIVE to CONNECTING.ro Counter32 .1.3.6.1.4.1.9.10.130.1.1.5.1.30 |
cMsdpPeerInNotificationsThe number of MSDP Notification messages received from this
peer.
This object is deprecated because MSDP Notifications have
been removed from the spec.rodeprecated Counter32 .1.3.6.1.4.1.9.10.130.1.1.5.1.31 |
cMsdpPeerOutNotificationsThe number of MSDP Notification messages transmitted to this
peer.
This object is deprecated because MSDP Notifications have
been removed from the spec.rodeprecated Counter32 .1.3.6.1.4.1.9.10.130.1.1.5.1.32 |
cMsdpPeerLastErrorThe last error code and subcode received via Notification
from this peer. If no error has occurred, this field is
zero. Otherwise, the first byte of this two byte OCTET
STRING contains the O-bit and error code, and the second
byte contains the subcode.
This object is deprecated because MSDP Notifications have
been removed from the spec.rodeprecated OCTET STRING .1.3.6.1.4.1.9.10.130.1.1.5.1.33 |
cMsdpPeerDiscontinuityTimeThe value of sysUpTime on the most recent occasion at which
one or more of this entry's counters suffered a
discontinuity. See the DESCRIPTION of each object to see if
it is expected to have discontinuities. These
discontinuities may occur at peer connection establishment.
If no such discontinuities have occurred since the last
reinitialization of the local management subsystem, then
this object contains a zero value.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.10.130.1.1.5.1.34 |
cMsdpSACacheTableThe (conceptual) table listing the MSDP SA advertisements
currently in the MSDP speaker's cache. SEQUENCE OF CMsdpSACacheEntry .1.3.6.1.4.1.9.10.130.1.1.6 |
cMsdpSACacheEntryAn entry (conceptual row) representing an MSDP SA
advertisement. The INDEX to this table includes
cMsdpSACacheOriginRP for diagnosing incorrect MSDP
advertisements; normally a Group and Source pair would be
unique.
Row creation is not permitted; msdpSACacheStatus may only be
used to delete rows from this table. CMsdpSACacheEntry .1.3.6.1.4.1.9.10.130.1.1.6.1 |
cMsdpSACacheGroupAddrThe group address of the SA Cache entry. IpAddress .1.3.6.1.4.1.9.10.130.1.1.6.1.1 |
cMsdpSACacheSourceAddrThe source address of the SA Cache entry. IpAddress .1.3.6.1.4.1.9.10.130.1.1.6.1.2 |
cMsdpSACacheOriginRPThe RP of the SA Cache entry. This field is in the INDEX in
order to catch multiple RP's advertising the same source and
group. IpAddress .1.3.6.1.4.1.9.10.130.1.1.6.1.3 |
cMsdpSACachePeerLearnedFromThe peer from which this SA Cache entry was last accepted.
This address must correspond to the cMsdpPeerRemoteAddress
value for a row in the MSDP Peer Table. This should be
0.0.0.0 on the router that originated the entry.ro IpAddress .1.3.6.1.4.1.9.10.130.1.1.6.1.4 |
cMsdpSACacheRPFPeerThe peer from which an SA message corresponding to this
cache entry would be accepted (i.e. the RPF peer for
cMsdpSACacheOriginRP). This may be different than
cMsdpSACachePeerLearnedFrom if this entry was created by an
MSDP SA-Response. This address must correspond to the
cMsdpPeerRemoteAddress value for a row in the MSDP Peer
Table, or may be 0.0.0.0 if no RPF peer exists.ro IpAddress .1.3.6.1.4.1.9.10.130.1.1.6.1.5 |
cMsdpSACacheInSAsThe number of MSDP SA messages received relevant to this
cache entry. This object must be initialized to zero when
creating a cache entry.ro Counter32 .1.3.6.1.4.1.9.10.130.1.1.6.1.6 |
cMsdpSACacheInDataPacketsThe number of MSDP encapsulated data packets received
relevant to this cache entry. This object must be
initialized to zero when creating a cache entry.ro Counter32 .1.3.6.1.4.1.9.10.130.1.1.6.1.7 |
cMsdpSACacheUpTimeThe time since this entry was first placed in the SA cache.
The first epoch is the time that the entry was first placed
in the SA cache, and the second epoch is the current time.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.9.10.130.1.1.6.1.8 |
cMsdpSACacheExpiryTimeThe time remaining before this entry will expire from the SA
cache.
The first epoch is now, and the second epoch is the time
that the entry will expire.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.9.10.130.1.1.6.1.9 |
cMsdpSACacheStatusThe status of this row in the table. The only allowable
actions are to retrieve the status, which will be `active',
or to set the status to `destroy' in order to remove this
entry from the cache.
Row creation is not permitted.
No columnar objects are writable, so there are none that may
be changed while the status value is active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.10.130.1.1.6.1.10 |
cMsdpMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.130.1.1.8 |
cMsdpMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.130.1.1.8.1 |
cMsdpMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.130.1.1.8.2 |
cMsdpRPAddressThe RP address used when sourcing MSDP SA messages. May be
0.0.0.0 on non-RP's.
Changes to this object should be stored to non-volatile
memory.rw IpAddress .1.3.6.1.4.1.9.10.130.1.1.11 |
cMsdpMeshGroupTableThe (conceptual) table listing MSDP Mesh Group
configuration. SEQUENCE OF CMsdpMeshGroupEntry .1.3.6.1.4.1.9.10.130.1.1.12 |
cMsdpMeshGroupEntryAn entry (conceptual row) repesenting a peer in an MSDP Mesh
Group.
If row creation is supported, dynamically added rows are
added to the system's stable configuration (corresponding to
a StorageType value of nonVolatile). CMsdpMeshGroupEntry .1.3.6.1.4.1.9.10.130.1.1.12.1 |
cMsdpMeshGroupNameThe name of the mesh group. DisplayString .1.3.6.1.4.1.9.10.130.1.1.12.1.1 |
cMsdpMeshGroupPeerAddressA peer address that is a member of the mesh group with name
cMsdpMeshGroupName. The cMsdpMeshGroupPeerAddress must match
a row in the cMsdpPeerTable. IpAddress .1.3.6.1.4.1.9.10.130.1.1.12.1.2 |
cMsdpMeshGroupStatusThis entry's status, by which new entries may be added to
the table and old entries deleted.
cMsdpMeshGroupName and cMsdpMeshGroupPeerAddress must be set
to valid values before the row can be activated. Since
these are the table's INDEX, a row can be activated by
simply setting the cMsdpMeshGroupStatus variable.
It is not possible to modify other columns in the same
conceptual row when the status value is active(1), because
there only other objects in the row are part of the INDEX.
Changing one of these changes the row, so an old row must be
deleted and a new one created.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.10.130.1.1.12.1.3 |