CISCO-GTP-MIB
The CISCO-GTP-MIB enables monitoring and management of GPRS Tunnelling Protocol (GTP) signaling and data transfer sessions on Cisco GGSN and SGSN devices, specifically tracking PDP context states, QoS profiles, and interface statistics across Gn and Gp links. This module provides visibility into tunnel establishment, throughput metrics, and charging data records required for maintaining GPRS backbone network integrity and performance.
Imported Objects
Objects
186 total| Object Name |
|---|
cGtpMIB MODULE-IDENTITY .1.3.6.1.4.1.9.9.188 |
cGtpMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.188.1 |
cGtpConfigurations OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.188.1.1 |
cGtpGSNServicerw Bits .1.3.6.1.4.1.9.9.188.1.1.1 |
cGtpVersionrw CGtpVersion .1.3.6.1.4.1.9.9.188.1.1.2 |
cGtpT3TunnelTimerrwobsolete Integer32 .1.3.6.1.4.1.9.9.188.1.1.3 |
cGtpT3ResponseTimerrw Integer32 .1.3.6.1.4.1.9.9.188.1.1.4 |
cGtpN3Requestrw Integer32 .1.3.6.1.4.1.9.9.188.1.1.5 |
cGtpN3BufferSizerw Integer32 .1.3.6.1.4.1.9.9.188.1.1.6 |
cGtpEchoRequestTimerEnablerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.188.1.1.7 |
cGtpEchoRequestTimerrw Integer32 .1.3.6.1.4.1.9.9.188.1.1.8 |
cGtpGSNTotalBandwidthResrcrwobsolete Unsigned32 .1.3.6.1.4.1.9.9.188.1.1.9 |
cGtpMaximumPdpsrw Unsigned32 .1.3.6.1.4.1.9.9.188.1.1.10 |
cGtpNotifEnablerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.188.1.1.11 |
cGtpDynamicEchoTimerEnablerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.188.1.1.12 |
cGtpDynamicEchoTimerMinTimerw Integer32 .1.3.6.1.4.1.9.9.188.1.1.13 |
cGtpDynamicEchoTimerSmoothFactorrw Integer32 .1.3.6.1.4.1.9.9.188.1.1.14 |
cGtpPathHistoryLimitrw CGtpMaxHistNumber .1.3.6.1.4.1.9.9.188.1.1.15 |
cGtpUpdateFailDeleterw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.188.1.1.16 |
cGtpSgsnProfileTable SEQUENCE OF CGtpSgsnProfileEntry .1.3.6.1.4.1.9.9.188.1.1.18 |
cGtpSgsnProfileEntry CGtpSgsnProfileEntry .1.3.6.1.4.1.9.9.188.1.1.18.1 |
cGtpSgsnProfileIndex Unsigned32 .1.3.6.1.4.1.9.9.188.1.1.18.1.1 |
cGtpSgsnProfileIpAddressTyperw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.188.1.1.18.1.2 |
cGtpSgsnProfileStartIpAddressrw InetAddress .1.3.6.1.4.1.9.9.188.1.1.18.1.3 |
cGtpSgsnProfileEndIpAddressrw InetAddress .1.3.6.1.4.1.9.9.188.1.1.18.1.4 |
cGtpSgsnProfilePortNumberrw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.188.1.1.18.1.5 |
cGtpSgsnProfileEchoDisablerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.188.1.1.18.1.6 |
cGtpSgsnProfileStorageTyperw StorageType (SNMPv2-TC) .1.3.6.1.4.1.9.9.188.1.1.18.1.7 |
cGtpSgsnProfileRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.188.1.1.18.1.8 |
cGtpStatus OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.188.1.2 |
cGtpLastNoRespToEchoGSNIpAddrTypro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.188.1.2.1 |
cGtpLastNoRespToEchoGSNIpAddrro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.188.1.2.2 |
cGtpPremiumQosMeanThroughputroobsolete Gauge32 UNITS "bytes/sec" .1.3.6.1.4.1.9.9.188.1.2.3 |
cGtpNormalQosMeanThroughputroobsolete Gauge32 UNITS "bytes/sec" .1.3.6.1.4.1.9.9.188.1.2.4 |
cGtpBestEffortQosMeanThroughputroobsolete Gauge32 UNITS "bytes/sec" .1.3.6.1.4.1.9.9.188.1.2.5 |
cGtpGSNTabledeprecated SEQUENCE OF CGtpGSNEntry .1.3.6.1.4.1.9.9.188.1.2.6 |
cGtpGSNEntrydeprecated CGtpGSNEntry .1.3.6.1.4.1.9.9.188.1.2.6.1 |
cGtpGSNAddressTypedeprecated InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.188.1.2.6.1.1 |
cGtpGSNAddressrodeprecated InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.188.1.2.6.1.2 |
cGtpGSNVersionrodeprecated CGtpVersion .1.3.6.1.4.1.9.9.188.1.2.6.1.3 |
cGtpPathTable SEQUENCE OF CGtpPathEntry .1.3.6.1.4.1.9.9.188.1.2.7 |
cGtpPathEntry CGtpPathEntry .1.3.6.1.4.1.9.9.188.1.2.7.1 |
cGtpPathAddressType InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.188.1.2.7.1.1 |
cGtpPathAddress InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.188.1.2.7.1.2 |
cGtpPathPort InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.188.1.2.7.1.3 |
cGtpPathVersionro CGtpVersion .1.3.6.1.4.1.9.9.188.1.2.7.1.4 |
cGtpPathRemoteNodero CGtpEntities .1.3.6.1.4.1.9.9.188.1.2.7.1.5 |
cGtpPathVrfNamero SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.188.1.2.7.1.6 |
cGtpTotalActivePathsro Gauge32 UNITS "Paths" .1.3.6.1.4.1.9.9.188.1.2.8 |
cGtpTotalActiveGtpv1DataPathsro Gauge32 UNITS "Paths" .1.3.6.1.4.1.9.9.188.1.2.9 |
cGtpStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.188.1.3 |
cGtpPathFailureOccurrencesro Counter32 UNITS "times" .1.3.6.1.4.1.9.9.188.1.3.1 |
cGtpCurrentUsedBandwidthroobsolete Gauge32 UNITS "bits/sec" .1.3.6.1.4.1.9.9.188.1.3.2 |
cGtpTotalDroppedPacketsro Counter32 .1.3.6.1.4.1.9.9.188.1.3.3 |
cGtpPathStatisticsTable SEQUENCE OF CGtpPathStatisticsEntry .1.3.6.1.4.1.9.9.188.1.3.4 |
cGtpPathStatisticsEntry CGtpPathStatisticsEntry .1.3.6.1.4.1.9.9.188.1.3.4.1 |
cGtpUnexpectedMsgsro Counter32 UNITS "messages" .1.3.6.1.4.1.9.9.188.1.3.4.1.1 |
cGtpDroppedDataMsgsro Counter32 UNITS "messages" .1.3.6.1.4.1.9.9.188.1.3.4.1.2 |
cGtpRcvdPDUMsgsro Counter32 UNITS "messages" .1.3.6.1.4.1.9.9.188.1.3.4.1.3 |
cGtpSentPDUMsgsro Counter32 UNITS "messages" .1.3.6.1.4.1.9.9.188.1.3.4.1.4 |
cGtpRcvdPDUOctetsro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.188.1.3.4.1.5 |
cGtpSentPDUOctetsro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.188.1.3.4.1.6 |
cGtpMsgTooShortro Counter32 UNITS "messages" .1.3.6.1.4.1.9.9.188.1.3.4.1.7 |
cGtpUnknownMsgsro Counter32 UNITS "messages" .1.3.6.1.4.1.9.9.188.1.3.4.1.8 |
cGtpUnexpectedSigMsgsro Counter32 UNITS "messages" .1.3.6.1.4.1.9.9.188.1.3.4.1.9 |
cGtpRoamingPDUsrodeprecated Counter32 UNITS "pdus" .1.3.6.1.4.1.9.9.188.1.3.4.1.10 |
cGtpSecurityViolationsro Counter32 .1.3.6.1.4.1.9.9.188.1.3.4.1.11 |
cGtpUnsupportedExtHdrro Counter32 UNITS "pdps" .1.3.6.1.4.1.9.9.188.1.3.4.1.12 |
cGtpPathFailuresro Counter32 .1.3.6.1.4.1.9.9.188.1.3.4.1.13 |
cGtpTotalDroppedro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.188.1.3.4.1.14 |
cGtpDroppedSigMsgsro Counter32 UNITS "messages" .1.3.6.1.4.1.9.9.188.1.3.4.1.15 |
cGtpRcvdSigMsgsro Counter32 UNITS "messages" .1.3.6.1.4.1.9.9.188.1.3.4.1.16 |
cGtpSentSigMsgsro Counter32 UNITS "messages" .1.3.6.1.4.1.9.9.188.1.3.4.1.17 |
cGtpTotalCreatedPDPsro Counter32 UNITS "pdps" .1.3.6.1.4.1.9.9.188.1.3.4.1.18 |
cGtpTotalDeletedPDPsro Counter32 UNITS "pdps" .1.3.6.1.4.1.9.9.188.1.3.4.1.19 |
cGtpTotalCreatedPppPDPsro Counter32 UNITS "pdps" .1.3.6.1.4.1.9.9.188.1.3.4.1.20 |
cGtpTotalDeletedPppPDPsro Counter32 UNITS "pdps" .1.3.6.1.4.1.9.9.188.1.3.4.1.21 |
cGtpSinglePDPSessClearedro Counter32 UNITS "pdps" .1.3.6.1.4.1.9.9.188.1.3.4.1.22 |
cGtpPathFailLocalDelPDPsro Counter32 UNITS "pdps" .1.3.6.1.4.1.9.9.188.1.3.4.1.23 |
cGtpVerUpgradeLocalDelPDPsro Counter32 UNITS "pdps" .1.3.6.1.4.1.9.9.188.1.3.4.1.24 |
cGtpNoSgsnLocalDelPDPsro Counter32 UNITS "pdps" .1.3.6.1.4.1.9.9.188.1.3.4.1.25 |
cGtpVerFallbackLocalDelPDPsro Counter32 UNITS "pdps" .1.3.6.1.4.1.9.9.188.1.3.4.1.26 |
cGtpCreateCollideWithDelro Counter32 .1.3.6.1.4.1.9.9.188.1.3.4.1.27 |
cGtpVersionChangesro Counter32 .1.3.6.1.4.1.9.9.188.1.3.4.1.28 |
cGtpRetransCreatePDPReqsro Counter32 .1.3.6.1.4.1.9.9.188.1.3.4.1.29 |
cGtpCreateAsUpdatero Counter32 .1.3.6.1.4.1.9.9.188.1.3.4.1.30 |
cGtpIpv6PdpActRejectsro Counter32 UNITS "pdps" .1.3.6.1.4.1.9.9.188.1.3.4.1.31 |
cGtpIpv6CreatedPDPsro Counter32 UNITS "pdps" .1.3.6.1.4.1.9.9.188.1.3.4.1.32 |
cGtpIpv6DeletedPDPsro Counter32 UNITS "pdps" .1.3.6.1.4.1.9.9.188.1.3.4.1.33 |
cGtpIpv6RcvdSigMsgsrodeprecated Counter32 UNITS "messages" .1.3.6.1.4.1.9.9.188.1.3.4.1.34 |
cGtpIpv6SentSigMsgsrodeprecated Counter32 UNITS "messages" .1.3.6.1.4.1.9.9.188.1.3.4.1.35 |
cGtpIpv6RcvdPDUsro Counter32 UNITS "messages" .1.3.6.1.4.1.9.9.188.1.3.4.1.36 |
cGtpIpv6SentPDUsro Counter32 UNITS "messages" .1.3.6.1.4.1.9.9.188.1.3.4.1.37 |
cGtpIpv6RcvdOctetsro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.188.1.3.4.1.38 |
cGtpIpv6SentOctetsro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.188.1.3.4.1.39 |
cGtpNoWaitSgsnLocalDelPDPsro Counter32 UNITS "pdps" .1.3.6.1.4.1.9.9.188.1.3.4.1.40 |
cGtpNoReqSgsnLocalDelPDPsro Counter32 UNITS "pdps" .1.3.6.1.4.1.9.9.188.1.3.4.1.41 |
cGtpRoamingTrustedPDPsro Counter32 UNITS "pdps" .1.3.6.1.4.1.9.9.188.1.3.4.1.42 |
cGtpRoamingNonTrustedPDPsro Counter32 UNITS "pdps" .1.3.6.1.4.1.9.9.188.1.3.4.1.43 |
cGtpNonRoamingPDPsro Counter32 UNITS "pdps" .1.3.6.1.4.1.9.9.188.1.3.4.1.44 |
CISCO-GTP-MIB Technical Reference Overview
The CISCO-GTP-MIB SNMP MIB module published by Cisco defines 186 managed OID objects, including 165 scalar/column metrics, 5 SNMP tables, and 1 trap/notification events anchored at base OID .1.3.6.1.4.1.9.9.188. Key tabular structures include cGtpSgsnProfileTable, cGtpGSNTable, cGtpPathTable, cGtpPathStatisticsTable, cGtpPathStatisticsHistoryTable. Monitored SNMP traps/notifications include cGtpPathFailedNotification.
Key OID Definitions in CISCO-GTP-MIB
.1.3.6.1.4.1.9.9.188This MIB module manages the GPRS Tunnelling Protocol (GTP) on GGSN and SGSN. GPRS provides wireless access to packet data network on the GSM infrastructure. The following diagram illustrates a simplified GPRS logical architecture with the name of inter-node interface: +-+ | a PLMN +======+ +======+ | | | SGSN | | AAA | | | +======+ +======+ | | | | | | Gn SGi | | | | | |+====+ +====+ +=====+ +======+ +======+ | +===+ || TE |-R-| MT |-| BSS |-| SGSN |-Gn-| GGSN |-|-Gi-|PDN| |+====+ +====+ +=====+ +======+ +======+ | +===+ | | | | | | +|+ Gp | +-+ | +====+ +=====+ +======+ | | | MS |-| SGSN | | | +====+ +=====+ +======+ | | | | other PLMN | +-+ GTP is the protocol between GSN nodes (GSN peers) in the GPRS backbone network. It includes both the GTP signalling and data transfer procedures. GTP is used both on the Gn interface, i.e. the interface between GSN peers with in a PLMN, and the Gp interface between GSN peers in different PLMNs. SGSN is the serving GPRS support node, it responsible for the delivery of data packets from and to the MS within its service area. GGSN is the gateway GPRS support node, it provides interworking with external PDN and is connected with SGSNs via an IP-based GPRS backbone network. The GTP protocol is implemented only by SGSNs and GGSN. A PDP Context is an information set maintained by MS and GSNs which describes the mobile wireless service call or session. A Qos Profile is associated with each PDP context which defines multiple attributes like precedence, delay, reliability, peak throughput and mean throughput. Based on the precedence, delay and mean throughput an user is classified into one of the three Qos classes: Best Effort, Normal and Premium. Mean throughput is measured at the Gi and R reference points in units of octets per second. It specifies the average rate at which data is expected to be transferred across the GPRS network during the remaining lifetime of an activated PDP context. A MAP converting GSN is responsible for converting GTP messages to and from MAP messages. This helps in the communication with HLR. Acronyms and terms: APN Access Point Name BSS Base Station Subsystem CG Charging Gateway COA Change of Authorization ETSI European Telecommunications Standards Institute GDM GTP Director Module Gi Reference point between GPRS and an external packet data network. Gn the interface between GSNs within a PLMN Gp the interface between GSNs in different PLMNs GGSN Gateway GPRS Support Node GPRS General Packet Radio Service GSM Global System for Mobile communication GSN GPRS Support Node G-PDU GTP PDU HLR Home Location Register MAP Mobile Application Protocol MME Mobility Management Entity MS Mobile Station = TE + MT MT Mobile Termination NMS Network Management System PDN Public Data Network PDP Packet Data Protocol PDU Protocol Data Unit PGW PDN Gateway PLMN Public Land Mobile Network R Reference point between a non-ISDN compatible TE and MT. SAE System Architecture Evolution SGSN Serving GPRS Support Node SGW Serving Gateway TE Terminal Equipment T-PDU the payload of G-PDU VRF Virtual routing and forwarding AAA Authentication, Authorization and Accounting eNodeB Evolved Node B RNC Radio Network Controller
.1.3.6.1.4.1.9.9.188.1.1.18This table provides the configuration on SGSN profiles identified by addresses and port numbers configured in GGSN and the associated profile actions to be applied. When an SGSN path identified by cGtpPathAddress and cGtpPathPort in cGtpPathEntry matches the profile matching criteria represented by cGtpSgsnProfileIpAddressType cGtpSgsnProfileStartIpAddress, cGtpSgsnProfileEndIpAddress and cGtpSgsnProfilePortNumber, the actions associated with the profile entry (such as disable echo) will be applied on the corresponding SGSN path.
.1.3.6.1.4.1.9.9.188.1.2.6GSN peer table. The SGSN-GGSN peer relationship is established as given in the following series of steps: 1. When Mobile System (MS) wants service, it sends packets to a SGSN with specific APN. 2. SGSN uses the DNS to resolve this APN to the IP address of the GGSN which is the designated as the gateway to this APN. 3. SGSN establishes a path to the GGSN using GTP protocol. 4. The SGSN and GGSN peer maintains path by sending echo request message to each other. If one side fails in echo reply for certain times, the other side will send a notification to NMS. A SGSN can have multiple GGSN as peers, while a GGSN can have multiple SGSN peers, depending on routing path.
.1.3.6.1.4.1.9.9.188.1.2.7This table identifies the paths established on a GSN. The path may be established between a GGSN and SGSN or GGSN and charging gateway or GGSN and MAP converting GSN. The path between GGSN and charging gateway is established when the charging gateway is configured on the GGSN. The path between GGSN and MAP converting GSN is established when the MAP converting GSN is configured on the GGSN. The path between a GGSN and SGSN is established in the following series of steps: 1. When Mobile System (MS) wants service, it sends packets to a SGSN with specific APN. 2. SGSN uses the DNS to resolve this APN to the IP address of the GGSN which is the designated as the gateway to this APN. 3. SGSN establishes a path to the GGSN using GTP protocol. 4. The SGSN and GGSN peer maintains path by sending echo request message to each other. If one side fails in echo reply for certain times, the other side will send a trap to NMS. A SGSN can have multiple GGSN as peers, while a GGSN can have multiple SGSN peers, depending on routing path. Moreover, a GSN can have more than one path to a peer, each of which will have a unique port.
.1.3.6.1.4.1.9.9.188.1.3.4The table has the statistics for each SGSN path established.
.1.3.6.1.4.1.9.9.188.1.3.5This table indicates historical information for GTP paths which have been deleted.
.1.3.6.1.4.1.9.9.188.2.0.1This notification is sent when one of this GSN's peers failed to respond to the GTP 'Echo Request' message for the waiting interval.
.1.3.6.1.4.1.9.9.188.1.1.1This object indicates the type of GPRS service that will be enabled on the device: undefined - the GPRS service functionality is turned off. ggsn - the device will function as a GGSN. sgsn - the device will function as SGSN. gtpdirector - the device will function as GDM. sgw - the device will function as a SGW in the SAE architecture. pgw - the device will function as a PGW in the SAE architecture. spgw - the device will function as a combined PGW and SGW in the SAE architecture. When the device is configured to function as GDM, all the other objects in this MIB will not be accessible and the CISCO-GTP-DIRECTOR-MIB should be used for managing the device.
.1.3.6.1.4.1.9.9.188.1.1.2The highest gtp version supported by the GSN. When the value is, version0 - GTP v0 is supported, version1 - GTP v1 and GTP v0 are supported, version2 - GTP v0, GTP v1 and GTP v2 are supported.
.1.3.6.1.4.1.9.9.188.1.1.3When the GSN behaves as SGSN, the T3-TUNNEL timer is used for mobility management. When a roaming MS moves from one SGSN(Old SGSN) to a another SGSN(New SGSN), this timer is started by the 'Old SGSN'. While the timer is running, the T-PDUs received by the 'Old SGSN' (from the GGSN), and any buffered T-PDUs are forwarded to the 'New SGSN'. When the GSN behaves as GGSN, the GGSN starts this timer after receiving a Update PDP Context request message from 'New SGSN'. An Update PDP context request shall be sent by SGSN as part of mobility management intimating that MS has moved to this SGSN. While the timer is running, the GGSN will not be forwarding any PDUs to the requesting 'New SGSN'.
.1.3.6.1.4.1.9.9.188.1.1.4The T3-RESPONSE timer for retransmission. This timer is started by a GSN, upon the transmission of a signalling request message; it is used for message retransmission purposes, in the event that no response is received by the time the timer expires.
.1.3.6.1.4.1.9.9.188.1.1.5Maximum number of retransmissions for a signalling request message if no corresponding response message is received for a request in cGtpT3ResponseTimer time.
.1.3.6.1.4.1.9.9.188.1.1.6Maximum size of the receive buffer for G-PDUs and signalling request messages. If a packet arrives with more data bytes than the receive buffer can contain, the packet will be discarded.
.1.3.6.1.4.1.9.9.188.1.1.7This object indicates whether Echo Request timer is used by the GGSN. - true : will enable the Echo Request timer. - false : will disable the Echo Request timer.
.1.3.6.1.4.1.9.9.188.1.1.8The time interval to transmit 'Echo Request' message. 'Echo Response' message is normally received in response to 'Echo Request' message. In the event of no response to the 'Echo Request' message, a notification is generated identifying the peer GSN (i.e. cGtpGSN Address), which fails to respond. This object can be retrieved only if cGtpEchoRequestTimerEnable is set to 'true'.
.1.3.6.1.4.1.9.9.188.1.1.9The total amount of bandwidth resource on the GSN, this total depends on various factors like system throughput, memory size, maximum number of PDP contexts supported. A portion of the total resources will be allocated to a user at the PDP context activation time based on the Qos class the user is assigned to.
.1.3.6.1.4.1.9.9.188.1.1.10The maximum number of PDP contexts that can be activated on the GSN.
.1.3.6.1.4.1.9.9.188.1.1.11Indicates whether cGtpNotifications notification will be sent when a notification is generated by the device. - 'true', it will enable the device to send a notification. - 'false', it will prevent the device from sending out a notification.
.1.3.6.1.4.1.9.9.188.1.1.12This object indicates whether dynamic echo timer is used by the GGSN. - true : will enable the dynamic echo timer. - false : will disable the dynamic echo timer.
.1.3.6.1.4.1.9.9.188.1.1.13This object specifies the minimum time used by the dynamic echo timer. This object should be ignored if cGtpDynamicEchoTimerEnable is set to 'false'.
.1.3.6.1.4.1.9.9.188.1.1.14This object specifies the smooth factor by which dynamic echo timer can be adjusted. This object should be ignored if cGtpDynamicEchoTimerEnable is set to 'false'.
.1.3.6.1.4.1.9.9.188.1.1.15This object specifies the maximum number of entries in the cGtpPathStatisticsHistoryTable.
.1.3.6.1.4.1.9.9.188.1.1.16This object specifies whether the delete action will be taken when a COA initiated update request for QOS change fails for a PDP context. If the object is set to 'true' and the update response from SGSN (for a update request) is not got after the retries or the received response indicates a cause value other than 'request accepted', then the PDP context will be deleted by GGSN.
.1.3.6.1.4.1.9.9.188.1.2.1This object indicates the type of Internet address by which cGtpLastNoRespToEchoGSNIpAddr is reachable.
More MIBs from Cisco
Browse all CiscoMIBs →The CISCO-UNIFIED-COMPUTING-COMPUTE-MIB provides SNMP-based monitoring and management of Cisco UCS compute blades, servers, and chassis components, exposing critical metrics such as CPU utilization, memory usage, thermal sensor readings, power supply status, and interface operational states. This module enables granular visibility into the health and performance of the Cisco Unified Computing System's compute subsystems for capacity planning and fault isolation.
The CISCO-UNIFIED-COMPUTING-STORAGE-MIB facilitates SNMP-based monitoring and management of storage subsystems, including Fibre Channel and iSCSI interfaces, within the Cisco Unified Computing System (UCS) fabric interconnects and blade servers. It exposes critical operational metrics such as port status, error counters, throughput statistics, and storage controller health states to enable granular visibility into the storage infrastructure.
The CISCO-UNIFIED-COMPUTING-VNIC-MIB enables SNMP-based monitoring and management of Virtual Network Interface Card (vNIC) attributes, including operational status, traffic counters, and binding configurations, within the Cisco Unified Computing System (UCS) fabric interconnects and server blades.
SNMP MIB module
The CISCO-UNIFIED-COMPUTING-BIOS-MIB enables SNMP-based monitoring and configuration of BIOS-level parameters, firmware versions, and hardware initialization states within Cisco Unified Computing System (UCS) servers. It provides visibility into critical server boot diagnostics, BIOS settings, and hardware readiness indicators to facilitate low-level infrastructure management and troubleshooting.
The CISCO-UNIFIED-COMPUTING-ETHER-MIB provides SNMP management interfaces for monitoring Ethernet interface statistics, link states, and error counters on Cisco Unified Computing System (UCS) fabric interconnects and blade server line cards. This module enables the tracking of physical layer connectivity, port throughput, and packet error rates within the UCS Ethernet switching infrastructure.