CISCO-GSLB-TC-MIB
The CISCO-GSLB-TC-MIB module provides standardized textual conventions and object identities required to define management structures for Cisco Global Server Load Balancing (GSLB) systems, specifically supporting the CISCO-GSLB-SYSTEM-MIB, CISCO-GSLB-DNS-MIB, and CISCO-GSLB-HEALTH-MON-MIB. It establishes the data types and identifiers necessary to monitor Content Routing Agent (CRA) interactions, Virtual IP (VIP) routing states, DNS race resolution metrics, and keepalive health checks across distributed GSLB architectures.
Imported Objects
Objects
1 total| Object Name |
|---|
ciscoGslbTcMIB MODULE-IDENTITY .1.3.6.1.4.1.9.9.583 |
CISCO-GSLB-TC-MIB Technical Reference Overview
The CISCO-GSLB-TC-MIB SNMP MIB module published by Cisco defines 1 managed OID objects, including 0 scalar/column metrics, 0 SNMP tables, and 0 trap/notification events anchored at base OID .1.3.6.1.4.1.9.9.583.
Key OID Definitions in CISCO-GSLB-TC-MIB
.1.3.6.1.4.1.9.9.583This MIB module defines Textual Conventions and OBJECT-IDENTITIES for use in documents defining management information base (MIBs) modules for managing CISCO-GSLB-SYSTEM-MIB, CISCO-GSLB-DNS-MIB and CISCO-GSLB-HEALTH-MON-MIB (These MIB modules are used for a Global Server Load Balancing device(GSLB)). Acronyms and their description: CRA : Content Routing Agent - software that provides information to a GSLB device for content routing decisions and handles content routing requests from the GSLB device. D-Proxy : It is a local name server of the client which has initiated a DNS query for a domain. VIP : Virtual IP Addresses - they are used by server load balancing devices to represent content hosted on one or more servers under their control. The use of VIPs is to route content to the proper requesting host without exposing the device's internal IP address. Keepalive : A keepalive is an interaction between GSLB device and another device using a commonly supported protocol. It is used to periodically check if a resource is still active. DNS race : It is a method of resolving the proximity of the CRAs from the D-Proxy. In this method the GSLB device sends a request to all the CRAs directing them to respond to the D-Proxy at at the same time. The first response received by the D-proxy is, by default, considered to be the most proximate.
More MIBs from Cisco
Browse all CiscoMIBs →The CISCO-UNIFIED-COMPUTING-COMPUTE-MIB provides SNMP-based monitoring and management of Cisco UCS compute blades, servers, and chassis components, exposing critical metrics such as CPU utilization, memory usage, thermal sensor readings, power supply status, and interface operational states. This module enables granular visibility into the health and performance of the Cisco Unified Computing System's compute subsystems for capacity planning and fault isolation.
The CISCO-UNIFIED-COMPUTING-STORAGE-MIB facilitates SNMP-based monitoring and management of storage subsystems, including Fibre Channel and iSCSI interfaces, within the Cisco Unified Computing System (UCS) fabric interconnects and blade servers. It exposes critical operational metrics such as port status, error counters, throughput statistics, and storage controller health states to enable granular visibility into the storage infrastructure.
The CISCO-UNIFIED-COMPUTING-VNIC-MIB enables SNMP-based monitoring and management of Virtual Network Interface Card (vNIC) attributes, including operational status, traffic counters, and binding configurations, within the Cisco Unified Computing System (UCS) fabric interconnects and server blades.
SNMP MIB module
The CISCO-UNIFIED-COMPUTING-BIOS-MIB enables SNMP-based monitoring and configuration of BIOS-level parameters, firmware versions, and hardware initialization states within Cisco Unified Computing System (UCS) servers. It provides visibility into critical server boot diagnostics, BIOS settings, and hardware readiness indicators to facilitate low-level infrastructure management and troubleshooting.
The CISCO-UNIFIED-COMPUTING-ETHER-MIB provides SNMP management interfaces for monitoring Ethernet interface statistics, link states, and error counters on Cisco Unified Computing System (UCS) fabric interconnects and blade server line cards. This module enables the tracking of physical layer connectivity, port throughput, and packet error rates within the UCS Ethernet switching infrastructure.