CISCO-GPRS-ACC-PT-MIB
AI MIB Summary
The CISCO-GPRS-ACC-PT-MIB manages Access Point Name (APN) configurations and associated engineering parameters on Cisco GGSN, PGW, SGW, and SPGW gateway devices within GPRS and Evolved Packet Core (EPC) architectures. It provides visibility into the list of supported APNs and their operational settings, enabling control over mobile subscriber data access to specific Public Data Networks (PDNs).
This MIB module supports access point configuration for GGSN in a GPRS system. GPRS [1] is a GSM network providing mobile wireless data communication services.
GGSN is the Gateway GPRS Support Node in the GPRS architecture. It provides interworking with external packet-switched networks - PDNs or other data networks.
GGSN is a software extension of a router.
A GGSN provides data access for its mobile subscribers to parts of the data network identified by the list of APNs configured on the node.
The following diagram illustrates the network elements in a GPRS network, and the interfaces between them:
+=====+ +======+ +======+ +=====+
| BSS || SGSN || GGSN || PDN |
+=====+ +======+ +======+ +=====+
^ ^ /|\ /|\ | | | Visited access ++ | provider network | Access | | | point | \|/ | table | V ++
+=====+
| MS |
+=====+
Access points must be configured on the GGSN. The Access Point Name is defined in GSM 03.03 [2] and consists of two parts, the APN Network Identifier and the APN Operator Identifier (more details in the object description in this MIB module). The cgprsAccPtTable contains the list of APNs supported by this GGSN and a set of engineering parameters that define the access point's operation.
This MIB is also supported in the Evolved Packet Core(EPC) architecture. The details of this architecture is discussed in CISCO-EPC-GATEWAY-MIB description. Hence, the MIB will be supported by GGSN Gateway, PDN Gateway(PGW), Serving Gateway(SGW) and a combined PGW and SGW Gateway SPGW(SGW PGW Gateway).
Acronyms and terms:
3GPP 3rd Generation Partnership Project
APN Access Point Name
BSS Base Station Subsystem
CAC Call Admission Control
COA Change of Authorization
CSG2 Content Service Gateway Release 2
ETSI European Telecommunications Standards Institute
Gi Name of the Interface between GGSN and PDN
Gn Name of the Interface between GGSN and SGSN
GGSN Gateway GPRS Support Node
GPRS General Packet Radio Service
GSM Global System for Mobile communication
Gx Dynamic Charging and Policy Interface
IMS IP Multimedia Subsystem
MME Mobility Management Entity
MS Mobile Station
P-CSCF Proxy Call Session Control Function
PCO Protocol Config Options
PDF Policy Decision Function
PDN Public Data Network
PDP Packet Data Protocol
PLMN Public Land Mobile Network
QOS Quality Of Service
SGSN Serving GPRS support Node
UE User Equipment
VPN Virtual Private Network
VRF VPN Routing and Forwarding
REFERENCE
[1] GSM 03.60: Digital cellular telecommunications system (Phase 2+); General Packet Radio Service (GPRS); Service description; Stage 2.
[2] GSM 03.03: Digital cellular telecommunication system (Phase 2+); General Packet Radio Service (GPRS); Service description; Stage 1.
Main OID:
ciscoGprsAccPtMIB.1.3.6.1.4.1.9.9.183
277
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
277 total| Object Name |
|---|
ciscoGprsAccPtMIBThis MIB module supports access point configuration
for GGSN in a GPRS system. GPRS [1] is a GSM network
providing mobile wireless data communication services.
GGSN is the Gateway GPRS Support Node in the GPRS
architecture. It provides interworking with external
packet-switched networks - PDNs or other data networks.
GGSN is a software extension of a router.
A GGSN provides data access for its mobile subscribers
to parts of the data network identified by the list of
APNs configured on the node.
The following diagram illustrates the network
elements in a GPRS network, and the interfaces
between them:
+=====+ +======+ +======+ +=====+
| BSS || SGSN || GGSN || PDN |
+=====+ +======+ +======+ +=====+
^ ^
/|\ /|\
| |
| Visited access ++
| provider network | Access |
| | point |
\|/ | table |
V ++
+=====+
| MS |
+=====+
Access points must be configured on the GGSN.
The Access Point Name is defined in GSM 03.03 [2] and
consists of two parts, the APN Network Identifier and
the APN Operator Identifier (more details in the
object description in this MIB module). The
cgprsAccPtTable contains the list of APNs supported
by this GGSN and a set of engineering parameters that
define the access point's operation.
This MIB is also supported in the Evolved Packet
Core(EPC) architecture. The details of this architecture
is discussed in CISCO-EPC-GATEWAY-MIB description. Hence,
the MIB will be supported by GGSN Gateway, PDN Gateway(PGW),
Serving Gateway(SGW) and a combined PGW and SGW Gateway
SPGW(SGW PGW Gateway).
Acronyms and terms:
3GPP 3rd Generation Partnership Project
APN Access Point Name
BSS Base Station Subsystem
CAC Call Admission Control
COA Change of Authorization
CSG2 Content Service Gateway Release 2
ETSI European Telecommunications Standards
Institute
Gi Name of the Interface between GGSN and PDN
Gn Name of the Interface between GGSN and SGSN
GGSN Gateway GPRS Support Node
GPRS General Packet Radio Service
GSM Global System for Mobile communication
Gx Dynamic Charging and Policy Interface
IMS IP Multimedia Subsystem
MME Mobility Management Entity
MS Mobile Station
P-CSCF Proxy Call Session Control Function
PCO Protocol Config Options
PDF Policy Decision Function
PDN Public Data Network
PDP Packet Data Protocol
PLMN Public Land Mobile Network
QOS Quality Of Service
SGSN Serving GPRS support Node
UE User Equipment
VPN Virtual Private Network
VRF VPN Routing and Forwarding
REFERENCE
[1] GSM 03.60: Digital cellular telecommunications
system (Phase 2+); General Packet Radio Service
(GPRS); Service description; Stage 2.
[2] GSM 03.03: Digital cellular telecommunication
system (Phase 2+); General Packet Radio Service
(GPRS); Service description; Stage 1. MODULE-IDENTITY .1.3.6.1.4.1.9.9.183 |
ciscoGprsAccPtMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.183.1 |
ciscoGprsAccPtConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.183.1.1 |
cgprsAccPtTableThis table contains a list of access points configured
on this Gateway. SEQUENCE OF CgprsAccPtEntry .1.3.6.1.4.1.9.9.183.1.1.1 |
cgprsAccPtEntryA description of an access point. Access point
parameters cannot be changed when active PDP's or
Bearer's exists on the Gateway. CgprsAccPtEntry .1.3.6.1.4.1.9.9.183.1.1.1.1 |
cgprsAccPtIndexA locally unique identifier for this access point on
this Gateway. Unsigned32 .1.3.6.1.4.1.9.9.183.1.1.1.1.1 |
cgprsAccPtRowStatusThis object is used to create or delete conceptual
row in this table.
To create a row, set this object to 'createAndGo'.
There are no mandatory objects in a create request.
To delete a row, set this object to 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.1.1.2 |
cgprsAccPtNameThe Access Point Name. It is composed of two parts:
- The APN Network Identifier is mandatory and is a
fully qualified domain name according to the DNS
naming conventions, e.g., 'company.com.'.
- The APN Operator Identifier is optional. It is a
fully qualified domain name according to the DNS
naming convention, and consists of three labels,
the last of which must be '.gprs'. For example,
'mncyyyy.mcczzzz.gprs'.
An example of a full APN name with both the Network
and operator identifiers is
'company.com.mncyyyy.mcczzzz.gprs'.rw SnmpAdminString .1.3.6.1.4.1.9.9.183.1.1.1.1.3 |
cgprsAccPtModeSpecifies the type of access allowed to the PDN
through this access point.
- 'transparent', indicates that users can access
without authentication.
- 'nontransparent', indicates that users must
be authenticated by the Gateway.rw Enumeration .1.3.6.1.4.1.9.9.183.1.1.1.1.4 |
cgprsAccPtIpAddressPoolSpecifies a dynamic address allocation method for
this access point.
- 'global', which indicates that no method is
defined specifically to this access point and the
DHCP or radius server configured for this Gateway
'globally' will be used to allocation a dynamic IP
address to the user.
- 'dhcp', which indicates that the DHCP server
will be used.
- 'radius', which indicates that the radius server
will be used.
- 'disable', which indicates that dynamic address
allocation is disabled.
- 'local', indicates that local address pool
configured on the Gateway is going to be used.
cgprsAccPtIpAddrLocalPoolName denotes the name
of the corresponding address pool.rw Enumeration .1.3.6.1.4.1.9.9.183.1.1.1.1.5 |
cgprsAccPtDHCPServerPriThis object specifies the IP address of the primary
DHCP server from which a mobile subscriber can request
an IP address assignment for the access of this APN.
In case this DHCP server is not available, the
secondary DHCP server is used.rw IpAddress .1.3.6.1.4.1.9.9.183.1.1.1.1.6 |
cgprsAccPtDHCPServerSecThe IP address of the secondary DHCP server.
The secondary DHCP server is used if the primary
DHCP server is not available. This object can be
set after configuring primary DHCP server.rw IpAddress .1.3.6.1.4.1.9.9.183.1.1.1.1.7 |
cgprsAccPtDHCPGwAddrThis object specifies the DHCP Gateway address that
is used in the 'giaddr' field of the DHCP request.
It is used by DHCP to determine from which pool the
IP address will be allocated.
If no DHCP Gateway is specified, the IP address
associated with the Gn interface is used.rw IpAddress .1.3.6.1.4.1.9.9.183.1.1.1.1.8 |
cgprsAccPtRadiusServerPriThis object specifies the IP address of the primary
RADIUS server used by this access point to
authenticate and/or authorize mobile users to access
the PDN.
In case this RADIUS server is not available, the
secondary will be used.
Obsoleted by cgprsAccPtAaaAuthServerGroup and
cgprsAccPtAaaAccountServerGroup.rwobsolete IpAddress .1.3.6.1.4.1.9.9.183.1.1.1.1.9 |
cgprsAccPtRadiusServerSecSpecifies a secondary RADIUS server.
The secondary RADIUS server will be used if the primary
RADIUS server is not available.
Obsoleted by cgprsAccPtAaaAuthServerGroup and
cgprsAccPtAaaAccountServerGroup.rwobsolete IpAddress .1.3.6.1.4.1.9.9.183.1.1.1.1.10 |
cgprsAccPtIPAccListGroupInThis object specifies the ACL against which to compare
packets received at this Access Point from the PDN for
forwarding towards an MS.
Access list at the access point level is used to
control which packets are allowed access between the
APN and the MS. Access violations by a packet according
to the rules in this ACL could cause this packet to be
dropped or its PDP or Bearer session terminated. Which
of these treatments is taken is specified by the object
cgprsAccPtAccessViolation.
This object is ignored if cgprsAccPtIPAccListInEnable
is set to 'false'.rw AccessControlListId .1.3.6.1.4.1.9.9.183.1.1.1.1.11 |
cgprsAccPtIPAccListGroupOutThis object specifies the ACL against which to compare
packets originated by an MS and received by at this
Access Point for forwarding to the PDN.
Access list at the access point level is used to
control which packets are allowed access between the
APN and the MS. Access violations by a packet according
to the rules in this ACL could cause this packet to be
dropped or its PDP or Bearer session terminated. Which
of these treatments is taken is specified by the object
cgprsAccPtAccessViolation.
This object is ignored if cgprsAccPtIPAccListOutEnable
is set to 'false'.rw AccessControlListId .1.3.6.1.4.1.9.9.183.1.1.1.1.12 |
cgprsAccPtIfIndexSpecifies an interface to be used by GGSN on Gi
interface.
The value zero indicates that no interface is
specified.
The cgprsAccPtIfNextHop must be specified if this
object is set to the Gi associated interface.rwobsolete InterfaceIndexOrZero (CISCO-TC) .1.3.6.1.4.1.9.9.183.1.1.1.1.13 |
cgprsAccPtIfNextHopSpecifies the IP address of the next hop for the
Gi interface, specified by cgprsAccPtIfIndex.
This value is mandatory if the value of
cgprsAccPtIfIndex is non-zero. Setting the
cgprsAccPtIfIndex object to zero will reset this
object to the value of '00000000'H, which means
it is not used.rwobsolete IpAddress .1.3.6.1.4.1.9.9.183.1.1.1.1.14 |
cgprsAccPtAccessViolationSpecifies how access violation should be treated.
An access violation occurs if the IP packets violates
any rules in ACL as specified by either
cgprsAccPtIPAccListGroupIn or
cgprsAccPtIPAccListGroupOut.
- 'discardPacket', packets are discarded.
- 'terminateSession', the user's session is
terminated.rw Enumeration .1.3.6.1.4.1.9.9.183.1.1.1.1.15 |
cgprsAccPtSubrRequiredThis object indicates if a user needs to subscribe
to this access point before accessing it.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.1.1.16 |
cgprsAccPtNetworkInitiatedThis object indicates whether network (PDN)
initiated PDP or Bearer sessions are allowed for
this access point. The more common case, is false,
which indicates that the PDP or Bearer is initiated
by the MS.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.1.1.17 |
cgprsAccPtIpAddrAllocationsIndicates the number of IP addresses allocated to
MS's.
Trigger Condition: This gauge is
incremented/decremented by successful completion of
create/delete dynamic PDP or Bearer context request
message respectively.ro Gauge32 .1.3.6.1.4.1.9.9.183.1.1.1.1.18 |
cgprsAccPtUsersThe number of mobile subscribers currently accessing
this APN. Obsoleted by cgprsAccPtActivePdps.roobsolete Gauge32 .1.3.6.1.4.1.9.9.183.1.1.1.1.19 |
cgprsAccPtIdlePdpPurgeTimerThis object indicates maximum idle connection time
allowed to the PDP or Bearer context before termination of the
GTP session. A value of 0 means session idle timer
is not used.rw Unsigned32 .1.3.6.1.4.1.9.9.183.1.1.1.1.20 |
cgprsAccPtBlockMsRoamingThis object indicates whether access to a roaming
MS needs to be blocked for this APN.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.1.1.21 |
cgprsAccPtAnonymousUserNameThis object specifies the anonymous user name, which
is used when a MS tries to access a non-transparent
APN without supplying user name and password.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.183.1.1.1.1.22 |
cgprsAccPtAnonymousUserPasswordThis object specifies the password corresponding
to cgprsAccPtAnonymousUserName. For security reasons,
retrieving this object returns a zero-length string.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.183.1.1.1.1.23 |
cgprsAccPtMsIsdnSuppressedThis object specifies whether the ISDN ID used
by the MS, when authenticating with a radius server,
needs to be suppressed or not. When set to 'true',
the ISDN ID attribute will not be sent by the Gateway.
When set to 'false', the ISDN ID attribute will be
sent by the Gateway. To set this object to 'true', AAA
radius group for authentication should have been
configured on the Gateway(either at global or APN level).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.1.1.24 |
cgprsAccPtMsIsdnSuppressedValueThis object specifies the value that will be
transmitted to the radius server in place of
mobile stations ISDN ID. This object can only
be set if cgprsAccPtMsIsdnSuppressed is 'true'.
Valid characters for this object are 0..9,
a, b, c, * and #. If no value is set, no MS-ISDN
ID will be sent to the radius server.rw DisplayString .1.3.6.1.4.1.9.9.183.1.1.1.1.25 |
cgprsAccPtAaaAuthServerGroupThis object specifies the AAA radius server group
that is used for authentication by this APN.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.183.1.1.1.1.26 |
cgprsAccPtAaaAccountServerGroupThis object specifies the AAA radius server group
that is used for accounting by this APN. If no
group is specified for accounting,
cgprsAccPtAaaAuthServerGroup will be used.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.183.1.1.1.1.27 |
cgprsAccPtAaaAccountingEnableThis object is used to enable accounting when the
APN is in 'transparent' mode. When the object is set to
'true', cgprsAccPtAaaAccountServerGroup is used for
accounting. If cgprsAccPtAaaAccountServerGroup is not
specified, cgprsAccPtAaaAuthServerGroup will be used.
When the APN is in 'non-transparent' mode, the
accounting will always be enabled i.e., this object
will be 'true' by default.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.1.1.28 |
cgprsAccPtTypeThis object specifies the type of APN.
'virtual' - Specifies an APN type that is not
associated with any specific physical target network
on the Gateway. When this object is set to 'virtual',
all other APN parameters are ignored.
'real' - Specifies an APN type that corresponds to a
physical interface to an external network on the Gateway.
'virtualPreAuth' - Specifies an APN type that is not
associated with any specific physical target network
on the Gateway. It applies a pre-authentication phase
for any create PDP or Bearer request that includes a virtual
APN. During pre-authentication, an Access-Request
message is sent to an AAA server and the AAA server
then returns a target APN encoded in a Radius
attribute in the Access-Accept message.rw Enumeration .1.3.6.1.4.1.9.9.183.1.1.1.1.29 |
cgprsAccPtVrfNameThis object specifies the name of the VRF with
which this APN is associated.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.183.1.1.1.1.30 |
cgprsAccPtDhcpAddrSpaceThis object specifies the address space used
by the dhcp server. This object can only be
set if cgprsAccPtDHCPServerPri is set.rw Enumeration .1.3.6.1.4.1.9.9.183.1.1.1.1.31 |
cgprsAccPtPppRegenEnableThis object is used to enable Gateway to regenerate
a PPP session for each IP PDP or Bearer context on
this APN.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.1.1.32 |
cgprsAccPtPppRegenMaxSessionsThis object specifies the maximum number of regenerated
PPP sessions allowed for this access-point.
This object can only be set if cgprsAccPtPppRegenEnable
is set to 'true'.
The maximum value that can be held by this object
depends on the Gateway's platform.rw Integer32 .1.3.6.1.4.1.9.9.183.1.1.1.1.33 |
cgprsAccPtPppRegenSetupTimeThis object specifies the maximum tolerance time within
which a regenerated PPP session has to fully come up.
This object can only be set if cgprsAccPtPppRegenEnable
is set to 'true'.rw Integer32 .1.3.6.1.4.1.9.9.183.1.1.1.1.34 |
cgprsAccPtAutoAggregationThis object is used to enable auto aggregation on this
APN. When a user tries to configure entries in
cgprsAccPtAggregTable, this object will automatically
be set to 'false'. When this object is set to 'true',
the entries in cgprsAccPtAggregTable, if any, will be
deleted.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.1.1.35 |
cgprsAccPtPcscfServerGroupNameThis object represents the Proxy-CSCF server group that
will be used by this APN. The Proxy-CSCF server group
contains a list of Proxy-CSCF addresses which will be
provided to the MS(UE) in response to a PDP or Bearer
contexts for which the P-CSCF address request field is
set in PCO.rw SnmpAdminString .1.3.6.1.4.1.9.9.183.1.1.1.1.36 |
cgprsAccPtAggregTableThis table contains the list of aggregate routes
configured on this APN. Gateway uses a static host route
to forward user data packets for each PDP or Bearer context
received from Gi interface to Gn interface. Using the
aggregate route (address range), total number of static
routes implemented in the Gateway for PDP or Bearer requests
can be greatly reduced. If there is no aggregate route
configured on this access-point, then default aggregate
routes configured on Gateway will be used. SEQUENCE OF CgprsAccPtAggregEntry .1.3.6.1.4.1.9.9.183.1.1.2 |
cgprsAccPtAggregEntryAn Entry contains the IP network prefix which is used
to combine the routes of PDP or Bearer requests for the same
network as a single route on the Gateway. CgprsAccPtAggregEntry .1.3.6.1.4.1.9.9.183.1.1.2.1 |
cgprsAccPtAggregIpAddrTypeThis object specifies the type of Internet address
denoted by cgprsAccPtAggregIpAddr. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.1.2.1.1 |
cgprsAccPtAggregIpAddrThis object specifies the IP address whose network
prefix is going to be defined by
cgprsAccPtAggregIpMask.
When this object is set, cgprsAccPtAggregIpMask must be
specified. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.1.2.1.2 |
cgprsAccPtAggregIpMaskThis object specifies the net-mask pertaining to
cgprsAccPtAggregIpAddr. CiscoInetAddressMask (CISCO-TC) .1.3.6.1.4.1.9.9.183.1.1.2.1.3 |
cgprsAccPtAggregRowStatusThis object is used to create a new row or delete an
existing row in this table.
To create a row, set this object to 'createAndGo'.
To delete a row, set this object to 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.2.1.4 |
cgprsAccPtAggregCsgGroupThis object specifies the name of the CSG Group.
The value must be same as an entry in
cgprsAccPtCsgGroupTable identified by
cgprsAccPtCsgGroupName.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.183.1.1.2.1.5 |
cgprsAccPtExtTableThis table is an extension of cgprsAccPtTable. SEQUENCE OF CgprsAccPtExtEntry .1.3.6.1.4.1.9.9.183.1.1.3 |
cgprsAccPtExtEntryAn entry in cgprsAccPtExtTable. CgprsAccPtExtEntry .1.3.6.1.4.1.9.9.183.1.1.3.1 |
cgprsAccPtIPAccListInEnableWhen this object is set to 'true', ACL denoted by
cgprsAccPtIPAccListGroupIn will be active. When
set to 'false', it will become inactive.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.3.1.1 |
cgprsAccPtIPAccListOutEnableWhen this object is set to 'true', ACL denoted by
cgprsAccPtIPAccListGroupOut will be active. When
set to 'false', it will become inactive.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.3.1.2 |
cgprsAccPtGtpRespMesgWaitAcctngWhen this object is set to 'true', Gateway waits for a
RADIUS accounting response before sending a create PDP
or Bearer context response to the MME or SGSN, for create
PDP or Bearer context requests received at a particular APN.
When this object is set to 'false', Gateway sends create
PDP or Bearer response to MME or SGSN after sending a RADIUS
start accounting message to the RADIUS server (without waiting
for a response from the RADIUS accounting server).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.3.1.3 |
cgprsAccPtImsiSuppressedThis object specifies whether GGSN will be sending
the radius attribute, IMSI value, in any of the
radius requests to the radius server or not. When set
to 'true', the IMSI attribute will not be sent by
the GGSN. When set to 'false', the IMSI attribute
will be sent by the GGSN. This object is obsoleted by
cgprsAccPtSuppressRadiusAttribs.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.3.1.4 |
cgprsAccPtVerifyUpStrTpduSrcAddrWhen this object is set to 'true', the Gateway will check the
upstream TPDU source address against the address
previously assigned to this user. If the addresses are
different, the TPDU is dropped, the notification
cgprsAccPtSecSrcViolNotif is generated and
cgprsAccPtSourceAddrViolTpdus is incremented. This
check will enable the Gateway to restrict the users with
fake identity.
When the object is set to 'false', no checking is
performed by the Gateway.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.3.1.5 |
cgprsAccPtVerifyUpStrTpduDstAddrWhen this object is set to 'true', Gateway will check the
upstream TPDU destination address against the range of
IP addresses reserved for PLMN devices. If there is a
match, the TPDU is dropped, the notification
cgprsAccPtSecDestViolNotif is generated and
cgprsAccPtDestAddrViolTpdus is incremented. The
configuration of IP address ranges reserved for PLMN
device is out of the scope of this MIB. This check
would enable the Gateway to protect the GPRS network from
some hacker who may try to flood the Gateway and PLMN
nodes with intense data traffic.
When the object is set to 'false', no checking is
performed by the Gateway.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.3.1.6 |
cgprsAccPtRedirInterMobilAddrTypThis object indicates the type of Internet address by
which cgprsAccPtRedirInterMobilAddr is reachable.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.1.3.1.7 |
cgprsAccPtRedirInterMobilAddrThis object represents the IP address of the device
to which inter-mobile traffic will be re-directed.
When this redirection is active on an APN, before
downstream packets exit the Gateway, they are screened
to see if they come from other GTP tunnels. If so,
they won't be GTP-tunneled downstream, but will get
redirected to the device specified by this object and
cgprsAccPtRedirInterMobilTraffic is incremented.
When this object is set to zero value, inter-mobile
traffic will not be redirected i.e., the traffic will
get switched through Gateway without going through any
Gi interface.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.1.3.1.8 |
cgprsAccPtSuppressRadiusAttribsThis object indicates the attributes that will be
suppressed by the Gateway in its its authorization and
accounting requests to the RADIUS server.rw Bits .1.3.6.1.4.1.9.9.183.1.1.3.1.9 |
cgprsAccPtInterimAccountinEnableThis object is used to enable Interim Accounting for a
PDP or Bearer context on this APN. When set to 'true',
accounting updates will be triggered whenever a update
PDP or Bearer request is received. This object can set
to 'true' only when accounting(cgprsAccPtAaaAccountingEnable)
is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.3.1.10 |
cgprsAccPtSetRadiusAttributesThis object indicates the values set in various radius
attributes by the Gateway while communicating with RADIUS
Server. When set to
'none' - reset the value set by the options below.
'userNameMsisdn' - MSISDN of the mobile is sent in the
user-name attribute.
'accSessIdChargingId' - Charging ID is sent in the
accounting session ID attribute.rw Bits .1.3.6.1.4.1.9.9.183.1.1.3.1.11 |
cgprsAccPtOperationModeThis object denotes the operation mode of this APN.
Each mode has different PDP or Bearer context activation and
deactivation behavior and is given as below:
inService - normal operational mode in which all
functions are allowed. cgprsAccPtInServiceNotif
notification will be sent to indicate the state
change.
maintenance - No new PDPs or Bearers can be activated in this
state. cgprsAccPtMaintenanceNotif notification
will be sent to indicate the state change.rw Enumeration .1.3.6.1.4.1.9.9.183.1.1.3.1.12 |
cgprsAccPtAbsoluteSessionTimerAbsolute session timer is a RADIUS attribute (#27) sent
by the AAA server in the Access-Accept packet. The Gateway
will deactivate the PDP or Bearer when this timer expires. This
object denotes the timer used by the Gateway when the same
is not received from the AAA server. Value of '0'
denotes that the timer is disabled.rw Unsigned32 (0 | 30..4294967) UNITS "seconds" .1.3.6.1.4.1.9.9.183.1.1.3.1.13 |
cgprsAccPtRadiusAttrNasIdThis object denotes the value used as NAS ID in the
RADIUS access requests sent by the Gateway on this APN. A
zero length string needs to be set to unconfigure the
NAS ID value.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.183.1.1.3.1.14 |
cgprsAccPtPdpInServicePolicyNamePer PDP or Bearer Policy feature on the Gateway ensures
that the PDP or Bearer contexts does not exceed bandwidth
negotiated as part of PDP or Bearer context activation
procedure. A service policy contains classification and
policing parameters, details of the same is out of the scope
of this MIB. This object denotes the name of the service
policy that is applicable to inbound traffic on all the PDP's
pertaining to this APN.rw SnmpAdminString .1.3.6.1.4.1.9.9.183.1.1.3.1.15 |
cgprsAccPtPdpOutServicePolicyNamThis object denotes the name of the service policy that
is applicable to outbound traffic on all the PDP's or Bearer's
pertaining to this APN.rw SnmpAdminString .1.3.6.1.4.1.9.9.183.1.1.3.1.16 |
cgprsAccPtPppRegenVerifyDomainWhen this object is set to 'true', a PPP regen session
creation would be rejected if the domain name in PCO
field is different than the APN name. This object can
only be set when cgprsAccPtPppRegenEnable is 'true'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.3.1.17 |
cgprsAccPtIpAddrLocalPoolNameThis object represents the name of the local address
pool used when cgprsAccPtIpAddressPool is set to
'local'.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.183.1.1.3.1.18 |
cgprsAccPtServiceAwareThis object is to enable service-aware billing
(Diameter Credit Control Application [DCCA]
support) on the access-point. This object can be
set only when the object cGgsnSAServiceAware present
in CISCO-GGSN-SERVICE-AWARE-MIB is set to 'true'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.3.1.19 |
cgprsAccPtAdvDownlinkNextHopAddrTypeThis object indicates the type of Internet address
of downlink next hop address.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.1.3.1.20 |
cgprsAccPtAdvDownlinkNextHopAddrThis object advertises the next hop address on the
Gateway to which downlink traffic destined for the Gateway
is to be routed. The address type is given by the
cgprsAccPtAdvDownlinkNextHopAddrType object.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.1.3.1.21 |
cgprsAccPtGtpUpdateFailDeleteThis object denotes the action to be taken when a COA
initiated update request for QOS change fails for a
PDP or Bearer context on this Access Point. If the object is
set to 'true' and the update response from MME or SGSN (for
a update request) is not got after the configured retries
or the received response indicates a cause value other than
'request accepted', then the PDP or Bearer context will be
deleted by the Gateway.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.3.1.22 |
cgprsAccPtAaaAccountInterPeriodThis object specifies the periodic accounting timer
interval value for the access point. When this object
is set to a value, 'interim' type accounting records
will be sent at the specified interval for the PDP or
Bearer contexts on this APN. When set to '0' the 'interim'
type accounting records will not be sent out.rw Unsigned32 (0 | 15..71582) UNITS "minutes" .1.3.6.1.4.1.9.9.183.1.1.3.1.23 |
cgprsAccPtAaaAccountInterRadiusThis object when set to 'true', enables Gateway to receive
and use the Accounting Periodic Interval from Radius for
the PDP or Bearer contexts on this APN.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.3.1.24 |
cgprsAccPtGxEnableThis object when set to 'true', indicates that this APN
is Gx enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.3.1.25 |
cgprsAccPtPcscfLoadBalanceThe Proxy-CSCF server group represented by the object
cgprsAccPtPcscfServerGroupName contains a list of
Proxy-CSCF addresses which will be provided to the MS(UE)
in the PCO (Protocol Configuration Option) response message.
The object cgprsAccPtPcscfLoadBalance when set to 'true',
enables Gateway to include the IP address of the least loaded
P-CSCF server in the PCO response message. Round Robin
algorithm is used for the selection of the least loaded
P-CSCF server.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.3.1.26 |
cgprsAccPtNetworkBehindMsEnableThis object when set to 'true', enables the Gateway to support
a network behind the Mobile Station.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.3.1.27 |
cgprsAccPtMaxSubnetsBehindMobileThis object indicates the number of subnetworks that can
be permitted behind the Mobile station. This object can be
set only when the object cgprsAccPtNetworkBehindMsEnable is
set to 'true' as this object can take effect only when
cgprsAccPtNetworkBehindMsEnable is 'true'. Setting the value
of '0' to this object will not take effect. The value of this
object will be set to '0' only if the object
cgprsAccPtNetworkBehindMsEnable is set to 'false'.rw Unsigned32 .1.3.6.1.4.1.9.9.183.1.1.3.1.28 |
cgprsAccPtChargingRecordTypeThis object denotes the charging record type of this APN.
Each type has different PDP or Bearer context behavior and
is given as below:
noconfig - When no record type is configured.
none - when there are no active PDP or Bearer contexts under
this APN
gcdr - When the derived record type is gcdr, the Gateway
indicates CSG2 that gcdr generation is configured for
this user, so that CSG2 will generate service level
CDRs.
egcdr - When the derived record type is egcdr, the Gateway
indicates CSG2 that egcdr generation is configured
for this user, so that CSG2 will not generate
service level CDRs.rw Enumeration .1.3.6.1.4.1.9.9.183.1.1.3.1.29 |
cgprsAccPtChargingGrpThis object provides the charging group identifier to
which an access point is associated with. By default the
value of this object is 0, it indicates that the default
charging group is associated with this access point entry.
The value of this object must be same as one of the values
identified by cgprsCgGroupIndex.rw Unsigned32 .1.3.6.1.4.1.9.9.183.1.1.3.1.30 |
cgprsAccPtIpAddrPoolNoRedistributeThis object indicates whether route propagation from PCOP to
SUP (Supervisor) shall occur. This object can be set/unset
only when the object cgprsAccPtIpAddressPool is configured.
By default the value of this object is false.
Setting it to true does not allow the redistribution of routes
from PCOP to the SUP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.3.1.31 |
cgprsAccPtDualAddrEnabledThis object when set to 'true' indicates that the APN has dual
stack capability.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.3.1.32 |
cgprsAccPtVerifyDownlinkAddrThis object indicates that the Gateway is programmed
to check and reject all downstream packets with same
source and destination.
When the value is set to 'true', the Gateway check and
reject all downstream packets with same source and
destination and 'false' means this feature is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.3.1.33 |
cgprsAccPtGenServerConfigs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.183.1.1.4 |
cgprsAccPtGenServerConfigTableEach column in this table represent IP address of
different generic servers, for example: DNS, NetBIOS,
configured on the APN. SEQUENCE OF CgprsAccPtGenServerConfigEntry .1.3.6.1.4.1.9.9.183.1.1.4.1 |
cgprsAccPtGenServerConfigEntryAn entry in cgprsAccPtGenServerConfigTable. CgprsAccPtGenServerConfigEntry .1.3.6.1.4.1.9.9.183.1.1.4.1.1 |
cgprsAccPtDnsServerAddrTypeThis object indicates the type of Internet address by
which cgprsAccPtPriDnsServer and cgprsAccPtSecDnsServer
are reachable.
DNS addresses to be sent to the MS can come from DHCP
server or RADIUS server based on IP address allocation
scheme chosen by cgprsAccPtIpAddressPool. The IP
address configured to cgprsAccPtPriDnsServer and
cgprsAccPtSecDnsServer will be sent to MS only when
- DHCP/RADIUS servers does not return any DNS address.
- local address pool is used for IP address
allocation for MS.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.1.4.1.1.1 |
cgprsAccPtPriDnsServerThis object specifies the IP address of the primary
DNS server that will be sent to MS.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.1.4.1.1.2 |
cgprsAccPtSecDnsServerThis object specifies the IP address of the secondary
DNS server that will be sent to MS. A secondary server
can be configured only if primary exists.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.1.4.1.1.3 |
cgprsAccPtNetbiosServerAddrTypeThis object indicates the type of Internet address by
which cgprsAccPtPriNetbiosServer and
cgprsAccPtSecNetbiosServer are reachable.
NBNS addresses to be sent to the MS can come from DHCP
server or RADIUS server based on IP address allocation
scheme chosen by cgprsAccPtIpAddressPool. The IP
address configured to cgprsAccPtPriNetbiosServer and
cgprsAccPtSecNetbiosServer will be sent to MS only when
- DHCP/RADIUS servers does not return any NBNS address.
- local address pool is used for IP address allocation
for MS.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.1.4.1.1.4 |
cgprsAccPtPriNetbiosServerThis object specifies the IP address of the primary
NetBIOS name server(NBNS) that will be sent to MS.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.1.4.1.1.5 |
cgprsAccPtSecNetbiosServerThis object specifies the IP address of the secondary
NetBIOS name server(NBNS) that will be sent to MS. A
secondary server can be configured only if primary
exists.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.1.4.1.1.6 |
cgprsAccPtImsConfigs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.183.1.1.5 |
cgprsAccPtImsConfigTableIP Multimedia Subsystem(IMS) has been introduced in
3GPP release 5 for the provision of multimedia services.
The Gateway terminates the GPRS Bearer to carry IMS signaling
and traffic. It communicates with Policy Decision
Function(PDF) over the Go interface and acts as a Policy
Enforcement Point(PEP) to enforce QoS per media flows
using COPS protocol.
This table represents various parameters required to
support IMS. This table is deprecated as IMS is not
supported from GGSN 5.0 release onwards.deprecated SEQUENCE OF CgprsAccPtImsConfigEntry .1.3.6.1.4.1.9.9.183.1.1.5.1 |
cgprsAccPtImsConfigEntryAn entry in cgprsAccPtImsConfigTabledeprecated CgprsAccPtImsConfigEntry .1.3.6.1.4.1.9.9.183.1.1.5.1.1 |
cgprsAccPtImsEnableThis object indicates whether IMS traffic, both
signaling and data, is allowed on this APN. When set to
disable - IMS traffic is not allowed.
enable - IMS traffic is allowed.
exclusive - Only IMS traffic is allowed, non-IMS
traffic will be rejected.
transformPrimary - non IMS traffic will be allowed
but all the rules applicable to IMS
traffic will also apply, for example. ACL's.
The options 'exclusive' and 'transformPrimary' are
mutually exclusive and can be set only when IMS is
enabled, i.e., when 'enable' is set.rwdeprecated Bits .1.3.6.1.4.1.9.9.183.1.1.5.1.1.1 |
cgprsAccPtPCscfGroupNameThis object represents the Proxy-CSCF server group that
will be used by this APN. Proxy-CSCF server group
contains list of Proxy-CSCF addresses which will be
provided to MS(UE) in response to a PDP contexts
for which P-CSCF address request field is set in PCO.rwdeprecated SnmpAdminString .1.3.6.1.4.1.9.9.183.1.1.5.1.1.2 |
cgprsAccPtImsSigAccGroupInThis object represents the access list that will be
applied to all the IMS signaling PDP context received
by this APN from the PDN for forwarding towards a MS.
An IMS signaling PDP context will have IMS signaling
flag set in the PCO field.rwdeprecated AccessControlListOrZero .1.3.6.1.4.1.9.9.183.1.1.5.1.1.3 |
cgprsAccPtImsSigAccGroupOutThis object represents the access list that will be
applied to all the IMS signaling PDP context received
by this APN from a MS for forwarding towards PDN. An
IMS signaling PDP context will have IMS signaling flag
set in the PCO field.rwdeprecated AccessControlListOrZero .1.3.6.1.4.1.9.9.183.1.1.5.1.1.4 |
cgprsAccPtRejNonImsPdpThis object represents the action to be taken on a non
IMS PDP context, when cgprsAccPtImsEnable is set to
'true' on this APN. When this object is set to 'true',
respective PDP context activation will be rejected.
When set to 'false', PDP activation will be based on the
QoS negotiation.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.5.1.1.5 |
cgprsAccPtChargingParams OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.183.1.1.6 |
cgprsAccPtChgProfTableCharging characteristics is a parameter that allows the
operator to apply different charging methods on a per
PDP or Bearer basis. Each charging profile is associated
with an index, set of charging parameters like subscriber
category, volume limit trigger, etc., details of the
same is outside the scope of the MIB and are defined
in CISCO-GPRS-CHARGING-MIB.
Charging characteristics can be received from MME or SGSN as
an Information Element in the create PDP/Bearer request or
defaults can be configured at the Gateway and/or APN level.
This table represents the charging profiles that can
be applied to different type of mobile subscribers on
an APN. The Gateway level configurations are dealt in
CISCO-GPRS-CHARGING-MIB. SEQUENCE OF CgprsAccPtChgProfEntry .1.3.6.1.4.1.9.9.183.1.1.6.1 |
cgprsAccPtChgProfEntryAn entry in cgprsAccPtChgProfTable. CgprsAccPtChgProfEntry .1.3.6.1.4.1.9.9.183.1.1.6.1.1 |
cgprsAccPtMsTypeThis object represents the type of MS to which the
charging profile selected by cgprsAccPtChgProfile is
applied on this APN. Different types of MS -
A roaming MS belongs to a MME/SGSN of a different PLMN.
A visitor MS is one whose IMSI value belongs to a
different PLMN. A home MS is neither roamer nor
visitor, i.e., IMSI and MME/SGSN corresponds to same PLMN.
A roamer/visitor is said to be Trusted/Friendly if
the different PLMN is a trusted/friendly PLMN. Enumeration .1.3.6.1.4.1.9.9.183.1.1.6.1.1.1 |
cgprsAccPtChgProfileThis object represents the charging profile number to
be applied to MS denoted by cgprsAccPtMsType on this
APN. Details of charging profile parameters are outside
the scope of this MIB and are covered by
CISCO-GPRS-CHARGING-MIB. This object is mandatory while
creating a row. The current valid values are 1 to 255.rw Unsigned32 .1.3.6.1.4.1.9.9.183.1.1.6.1.1.2 |
cgprsAccPtChgProfOverrideThis object specifies whether charging characteristics
value supplied by MME or SGSN will be ignored and the values
supplied in this table are used. When this object is
set to 'true', the value supplied by MME or SGSN will be
ignored.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.6.1.1.3 |
cgprsAccPtChgProfRowStatusThis object is used to create a new row or delete an
existing row in this table.
To create a row, set this object to 'createAndGo'.
To delete a row, set this object to 'destroy'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.6.1.1.4 |
cgprsAccPtCacConfigs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.183.1.1.7 |
cgprsAccPtCacTableCall Admission Control(CAC) on the Gateway ensures that
required network resources are available for real-time
data traffic, such as voice, video, etc., and to support
establishment and modification of the QoS parameters by
signaling and negotiating during PDP or Bearer context
activation procedure and modification procedure. CAC
performs this by examining various QoS parameters like
traffic class, maximum bit rate and guaranteed bit rate
for both uplink and downlink received from the MME or
SGSN with the local configured parameters or policy
received from Policy Decision Function(PDF).
This table represents various parameters required to
support CAC. SEQUENCE OF CgprsAccPtCacEntry .1.3.6.1.4.1.9.9.183.1.1.7.1 |
cgprsAccPtCacEntryAn entry in cgprsAccPtCacTable. CgprsAccPtCacEntry .1.3.6.1.4.1.9.9.183.1.1.7.1.1 |
cgprsAccPtCacPolicyNameThis object represents the local policy name that will
be used by CAC for the PDP's or Bearer's pertaining to
this APN.
Details of QoS parameters pertaining to a CAC policy
are out of scope of this MIB and are covered in
CISCO-GGSN-QOS-MIB.
A zero-length string denotes that no policy is
configured.rw SnmpAdminString .1.3.6.1.4.1.9.9.183.1.1.7.1.1.1 |
cgprsAccPtCacUpStrBandWidthPoolA Bandwidth pool is a user defined pool with bandwidth
pre-allocation details like amount of available
bandwidth, percent of bandwidth available to a specific
traffic class. CAC uses this information during PDP or
Bearer context activation and modification procedures.
This object represents the name of the bandwidth pool
used for upstream traffic. Configuration of the
bandwidth pool is covered in CISCO-GGSN-QOS-MIB.
A zero-length string denotes that no policy is
configured.rw SnmpAdminString .1.3.6.1.4.1.9.9.183.1.1.7.1.1.2 |
cgprsAccPtCacDnStrBandWidthPoolThis object represents the name of the bandwidth pool
used for downstream traffic. Configuration of the
bandwidth pool is covered in CISCO-GGSN-QOS-MIB.
A zero-length string denotes that no policy is
configured.rw SnmpAdminString .1.3.6.1.4.1.9.9.183.1.1.7.1.1.3 |
cgprsAccPtRouteProbeConfigs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.183.1.1.8 |
cgprsAccPtRouteProbeTableRoute probe feature enables the Gateway to send out a route
probe packet to a configured destination after a
successful PDP or Bearer activation procedure. The source IP
address of the packet would be the IP address of the
PDP or Bearer context.
This table represents various parameters set in the
route probe packet. At this point, UDP packets will be
sent, a new column will be added to represent the
protocol when the support is extended to other
protocols. SEQUENCE OF CgprsAccPtRouteProbeEntry .1.3.6.1.4.1.9.9.183.1.1.8.1 |
cgprsAccPtRouteProbeEntryAn entry in cgprsAccPtRouteProbeTable. CgprsAccPtRouteProbeEntry .1.3.6.1.4.1.9.9.183.1.1.8.1.1 |
cgprsAccPtRpDestAddrTypeThis object indicates the type of Internet address by
which cgprsAccPtRpDestAddr is reachable.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.1.8.1.1.1 |
cgprsAccPtRpDestAddrThis object specifies the destination IP address to
which the route probe packet needs to be sent.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.1.8.1.1.2 |
cgprsAccPtRpProtocolThis objects specifies the protocol type of route probe
packet. This object can be set only after
cgprsAccPtRpDestAddr is being set.rw Enumeration .1.3.6.1.4.1.9.9.183.1.1.8.1.1.3 |
cgprsAccPtRpDestPortThis object specifies the destination port number of
the route probe packet when cgprsAccPtRpProtocol is
set to 'udp'. This object can be set only after
cgprsAccPtRpDestAddr is being set.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.1.8.1.1.4 |
cgprsAccPtRpTtlThis object specifies the TTL value set in the route
probe packet. This object can be set only after
cgprsAccPtRpDestAddr is being set.rw Unsigned32 .1.3.6.1.4.1.9.9.183.1.1.8.1.1.5 |
cgprsAccPtIpv6Configs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.183.1.1.9 |
cgprsAccPtIpv6TableThe Gateway supports IPv6 PDP or Bearer type and its user
traffic. It will provide the IPv6 prefix and interface
identifier to the MS; generate IPv6 PDP or Bearer address
in the appropriate charging records and AAA accounting record.
This table represents various parameters required to
support IPv6 PDP or Bearer under APN. SEQUENCE OF CgprsAccPtIpv6Entry .1.3.6.1.4.1.9.9.183.1.1.9.1 |
cgprsAccPtIpv6EntryAn entry in cgprsAccPtIpv6Table.
The agent can create/destroy/modify a profile as a
result of actions from the local console. The table
objects can be modified, when the RowStatus is active.
The entries in this table are stored in NVRAM when the
agent writes the configuration to memory before
restart. CgprsAccPtIpv6Entry .1.3.6.1.4.1.9.9.183.1.1.9.1.1 |
cgprsAccPtIpv6BaseVTemplateThis object specifies the base virtual template
for an APN. To create a sub-interface for each PDP or
Bearer, a base virtual-template needs to be configured so
that virtual-access interface can be cloned from it. Many
APN can share one base virtual-template. But one APN
can only use one base virtual-template.
This object must be set to appropriate value for IPv6
APN i.e., when the object cgprsAccPtIpv6Enable or
cgprsAccPtIpv6Exclusive is set to 'true'.rw Unsigned32 .1.3.6.1.4.1.9.9.183.1.1.9.1.1.1 |
cgprsAccPtIpv6DnsAddrTypeThis object specifies the type of
cgprsAccPtIpv6DnsPriAddress and
cgprsAccPtIpv6DnsSecAddress.
DNS addresses to be sent to the MS can come from DHCP
server or RADIUS server based on IP address allocation
scheme chosen by cgprsAccPtIpv6AddrPool. The IP address
configured to cgprsAccPtIpv6DnsPriAddress and
cgprsAccPtIpv6DnsSecAddress will be sent to MS only when
- DHCP/RADIUS servers does not return any DNS address.
- local address pool is used for IP address
allocation for MS.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.1.9.1.1.2 |
cgprsAccPtIpv6DnsPriAddressThis object specifies the IPv6 address of the primary
DNS server that will be sent to MS.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.1.9.1.1.3 |
cgprsAccPtIpv6DnsSecAddressThis object specifies the IPv6 address of the secondary
DNS server that will be sent to MS. This object can
be configured only after configuring the primary DNS
address(cgprsAccPtIpv6DnsPriAddress).rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.1.9.1.1.4 |
cgprsAccPtIpv6EnableThis object specifies whether the APN supports
IPv6 PDP or Bearer.
The Gateway supports dual stack APN. Both IPv6 and IPv4 PDP
or Bearer can be created for the same APN.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.9.1.1.5 |
cgprsAccPtIpv6ExclusiveThis object specifies whether the APN supports only
IPv6 PDPs or Bearers.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.9.1.1.6 |
cgprsAccPtIpv6AccessGroupDownThis object specifies the name of the access list
applied to all the traffic received by this APN from
the PDN, for forwarding towards a MS.rw AccessControlListName .1.3.6.1.4.1.9.9.183.1.1.9.1.1.7 |
cgprsAccPtIpv6AccessGroupUpThis object specifies the name of the access list
applied to all the traffic received by this APN from
a MS, for forwarding towards PDN.rw AccessControlListName .1.3.6.1.4.1.9.9.183.1.1.9.1.1.8 |
cgprsAccPtIpv6AddrPoolThis object specifies a dynamic address allocation
method followed by this access point.
- 'global', which indicates that no method is
defined specifically to this access point and the
DHCP or radius server configured for this Gateway
under AAA configurations will be used to
allocation a dynamic IPv6 address to the user.
- 'dhcp', which indicates that the DHCP server
will be used.
- 'radius', which indicates that the radius server
will be used.
- 'disable', which indicates that dynamic address
allocation is disabled.
- 'local', indicates that local address pool
configured on the Gateway is going to be used.
cgprsAccPtIpv6AddrLocalPoolName denotes the name
of the corresponding address pool.rw Enumeration .1.3.6.1.4.1.9.9.183.1.1.9.1.1.9 |
cgprsAccPtIpv6AddrLocalPoolNameThis object specifies the name of the local address
pool used when cgprsAccPtIpv6AddrPool is set to
'local'.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.183.1.1.9.1.1.10 |
cgprsAccPtIpv6RedirectThis object specifies the traffic redirection in an
APN.
- 'none', indicates that, traffic will not be
redirected i.e., the traffic will get switched through
the Gateway without going through any Gi interface.
- 'intermobile', when this redirection is active on
an APN, before downstream packets exit the Gateway, they
are screened to see if they come from other GTP
tunnels. If so, packets won't be GTP-tunneled
downstream, but will get redirected to the device
specified by the object cgprsAccPtIpv6RedirectAddr.
- 'all', when this redirection is active on an APN,
redirect all packets to a specified destination, given
by the object cgprsAccPtIpv6RedirectAddr, regardless
whether the destination address belongs to a MS on the
same Gateway or not.rw Enumeration .1.3.6.1.4.1.9.9.183.1.1.9.1.1.11 |
cgprsAccPtIpv6RedirectAddrTypeThis object specifies the type of
cgprsAccPtIpv6RedirectAddr.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.1.9.1.1.12 |
cgprsAccPtIpv6RedirectAddrThis object specifies the Internet address of the
device to which traffic will be re-directed.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.1.9.1.1.13 |
cgprsAccPtIpv6SecurityVerifySrcWhen this object is set to 'true', the Gateway will check the
upstream TPDU source address against the address
previously assigned to this user. If the addresses are
different, the TPDU is dropped. This check will enable
the Gateway to restrict the users with fake identity.
When the object is set to 'false', the Gateway will not
perform any checking on the upstream TPDU for the
source address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.9.1.1.14 |
cgprsAccPtIpv6SecurityVerifyDstWhen this object is set to 'true', the Gateway will check the
upstream TPDU destination address against the range of
IP addresses reserved for PLMN devices. If there is a
match, the TPDU is dropped. This check would enable
the Gateway to protect the GPRS network from some hacker
who may try to flood the Gateway and PLMN nodes with
intense data traffic.
When the object is set to 'false', the Gateway will not
perform any checking on the upstream TPDU for the
destination address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.9.1.1.15 |
cgprsAccPtIpv6AddrAllocationsThis object indicates the total number of IPv6
addresses currently allocated to user.ro Gauge32 .1.3.6.1.4.1.9.9.183.1.1.9.1.1.16 |
cgprsAccPtDhcpv6ProxClientIntfThe object indicates the interface index, of the
interface which is to be used for DHCPv6 request
multicasting.rw InterfaceIndexOrZero (CISCO-TC) .1.3.6.1.4.1.9.9.183.1.1.9.1.1.17 |
cgprsAccptDhcpv6RapidCommitThis object indicates that whether DHCPv6 rapid-commit
feature is enabled for this APN.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.9.1.1.18 |
cgprsAccptDhcpv6PoolNameThis object represents the IPV6 DHCP
pool-name configured for this APN.rw SnmpAdminString .1.3.6.1.4.1.9.9.183.1.1.9.1.1.19 |
cgprsAccPtCsgGroupTableThis table contains the list of CSG Groups
configured on this APN. SEQUENCE OF CgprsAccPtCsgGroupEntry .1.3.6.1.4.1.9.9.183.1.1.10 |
cgprsAccPtCsgGroupEntryAn Entry contains the CSG Group name configured
under the access point entry with index
cgprsAccPtIndex.
The agent can create/destroy a CSG group under
access point. CgprsAccPtCsgGroupEntry .1.3.6.1.4.1.9.9.183.1.1.10.1 |
cgprsAccPtCsgGroupNameThis object specifies CSG Group name to use to
communicate with the CSG server in an access point
configuration.
The value must be same as an entry in cGgsnSACsgTable
identified by cGgsnSACsgGroupName. SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.183.1.1.10.1.1 |
cgprsAccPtCsgGroupRowStatusThis object is used to create a new row or delete an
existing row in this table.
This object must be set to 'creatAndGo' to create
an entry and set to 'destroy' to delete an entry.
The value in any column may be modified any time even the
value of this entry rowStatus object is 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.1.10.1.2 |
ciscoGprsAccPtCfgNotifInfo OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.183.1.2 |
cgprsAccPtCfgNotifHistTableThis table contains a history of access point
configuration change notifications generated by
the agent for changes in the access point
configuration.
The object cgprsAccPtCfgNotifHistMax specifies the
maximum number of entries stored in this table.
When the table is full, the oldest entries are
discarded to make space for new entries. SEQUENCE OF CgprsAccPtCfgNotifHistEntry .1.3.6.1.4.1.9.9.183.1.2.1 |
cgprsAccPtCfgNotifHistEntryA description of a configuration change in the
cgprsAccPtTable. A configuration change is said
to occur if one of the following happens:
- An access point has been created. In this
case the object cgprsAccPtCfgNotifAccPtIndex
is set to the index of the access point being
created and cgprsAccPtCfgNotifReason is
set to 'creation'.
- An access point has been deleted. In this
case the object cgprsAccPtCfgNotifAccPtIndex
is set to the index of the access point being
deleted and cgprsAccPtCfgNotifReason is
set to 'deletion'.
- The configuration of an access point has
changed. In this case the object
cgprsAccPtCfgNotifAccPtIndex is set to the
index of the access point being changed and
cgprsAccPtCfgNotifReason is set to
'modification'. The configuration change of
an access point is said to occur if any of the
configurable attributes are changed. CgprsAccPtCfgNotifHistEntry .1.3.6.1.4.1.9.9.183.1.2.1.1 |
cgprsAccPtCfgNotifIndexAn arbitrary non-zero integer value uniquely
identifying each notification previously sent
by the GPRS. This value increases monotonically
with each notification sent by the Gateway.
When it reaches the maximum value, it wraps to 1. Unsigned32 .1.3.6.1.4.1.9.9.183.1.2.1.1.1 |
cgprsAccPtCfgNotifAccPtIndexThis object specifies the access point which has
been created, changed or modified.ro Unsigned32 .1.3.6.1.4.1.9.9.183.1.2.1.1.2 |
cgprsAccPtCfgNotifReasonThis object describes the reason of the notification.ro Enumeration .1.3.6.1.4.1.9.9.183.1.2.1.1.3 |
cgprsAccPtCfgNotifEnableThis object controls whether the access point
notifications, cgprsAccPtMIBNotifications, are
generated. Note that entries in the
cgprsAccPtCfgNotifHistTable are generated
irrespectively to this object.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.183.1.2.2 |
cgprsAccPtCfgNotifHistMaxThe maximum size of the event history table,
cgprsAccPtCfgNotifHistTable.
When the table is full, the oldest entries are
removed to make space for new entries.rw Unsigned32 .1.3.6.1.4.1.9.9.183.1.2.3 |
cgprsAccPtCfgNotifLatestIndexThe value of cgprsAccPtCfgNotifIndex for the most
recently created entry in cgprsAccPtCfgNotifHistTable.ro Unsigned32 .1.3.6.1.4.1.9.9.183.1.2.4 |
ciscoGprsAccPtStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.183.1.3 |
cgprsAccPtStatisticsTableThis table contains the performance statistics of
each APN on this Gateway. SEQUENCE OF CgprsAccPtStatisticsEntry .1.3.6.1.4.1.9.9.183.1.3.1 |
cgprsAccPtStatisticsEntryEntry for each APN in statistics table. CgprsAccPtStatisticsEntry .1.3.6.1.4.1.9.9.183.1.3.1.1 |
cgprsAccPtMsActivatedPdpsThis object indicates the total number of PDP or Bearer
context activation procedures initiated by any MS on this APN.
Trigger Condition: This counter is triggered by create
PDP or Bearer request message.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.1 |
cgprsAccPtSuccMsActivatedPdpsThis object indicates the total number of successfully
completed PDP or Bearer context activation procedures initiated
by MS on this APN.
Trigger Condition: This counter is triggered by create
PDP or Bearer request message.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.2 |
cgprsAccPtMsActivatedDynPdpsThis object indicates the total number of dynamic
PDP or Bearer context activation procedures initiated by the
MS on this APN. When a MS requests dynamic PDP or Bearer
address from the PLMN, a dynamic PDP or Bearer context
activation procedure is initiated.
Trigger Condition: This counter is triggered by a request
message to create a PDP or Bearer context.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.3 |
cgprsAccPtSuccMsActivatedDynPdpsThis object indicates the total number of successfully
completed dynamic PDP or Bearer context activation procedures
initiated by MS on this APN.
Trigger Condition: This counter is triggered by a request
message to create a PDP or Bearer context.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.4 |
cgprsAccPtMsDeactivatedPdpsThis object indicates the total number of PDP
or Bearer context deactivation procedures initiated by the
MS on this APN.
Trigger Condition: This counter is triggered by a request
message to delete PDP or Bearer context.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.5 |
cgprsAccPtSuccMsDeactivatedPdpsThis object indicates the total number of
successfully completed PDP or Bearer context deactivation
procedures initiated by the MS.
Trigger Condition: This counter is triggered by a request
message to delete PDP or Bearer context.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.6 |
cgprsAccPtNetworkInitPdpsThis object indicates the total number of network
initiated PDP or Bearer context activation procedures.
Trigger Condition: This counter is triggered by a request
message to create PDP or Bearer context.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.7 |
cgprsAccPtSuccNetworkInitPdpsThis object indicates the total number of
successfully completed network initiated PDP
or Bearer context activation procedures.
Trigger Condition: This counter is triggered by a request
message to create PDP or Bearer context.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.8 |
cgprsAccPtGgsnDeactivatedPdpsThis object indicates the total number of PDP
context deactivation procedures initiated by the
Gateway.
Trigger Condition: This counter is triggered by delete
PDP request message.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.9 |
cgprsAccPtSuccGgsDeactivatedPdpsThis object indicates the total number of
successfully completed PDP context deactivation
procedures initiated by the Gateway.
Trigger Condition: This counter is triggered by delete
PDP request message.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.10 |
cgprsAccPtActivePdpsThis object indicates the current number of active
PDP or Bearer contexts on this APN.
Trigger Condition: This counter is incremented/
decremented by a request message to create/delete
PDP or Bearer context respectively.ro Gauge32 .1.3.6.1.4.1.9.9.183.1.3.1.1.11 |
cgprsAccPtUpstreamTrafficVolThis object indicates the total payload volume in
upstream traffic. Data flow from MS to PDN is
considered to be upstream traffic.
This object is deprecated by
cgprsAccPtRevUpstreamTrafficVol.rodeprecated Counter32 UNITS "bytes" .1.3.6.1.4.1.9.9.183.1.3.1.1.12 |
cgprsAccPtDownstreamTrafficVolThis object indicates the total payload volume in
downstream traffic. Data flow from PDN to MS is
considered as downstream traffic.
This object is deprecated by
cgprsAccPtRevDownstrTrafficVol.rodeprecated Counter32 UNITS "bytes" .1.3.6.1.4.1.9.9.183.1.3.1.1.13 |
cgprsAccPtSourceAddrViolTpdusThis object indicates the total number of upstream
TPDU's that have been dropped due to source address
violation as specified by
cgprsAccPtVerifyUpStrTpduSrcAddr.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.183.1.3.1.1.14 |
cgprsAccPtDestAddrViolTpdusThis object indicates the total number of upstream
TPDU's that have been dropped due to destination
address violation as specified by
cgprsAccPtVerifyUpStrTpduDstAddr.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.183.1.3.1.1.15 |
cgprsAccPtRedirInterMobilTrafficThis object represents the total number of packets,
pertaining to inter mobile communication, that have
been redirected to device specified by
cgprsAccPtRedirInterMobilAddr.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.183.1.3.1.1.16 |
cgprsAccPtRevUpstreamTrafficVolThis object indicates the total payload volume in
upstream traffic. Data flow from MS to PDN is
considered to be upstream traffic.
Trigger Condition: This counter is triggered when
upstream traffic is being routed to PDN.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.183.1.3.1.1.17 |
cgprsAccPtRevDownstrTrafficVolThis object indicates the total payload volume in
downstream traffic. Data flow from PDN to MS is
considered as downstream traffic.
Trigger Condition: This counter is triggered when
downstream traffic is being routed to PDN.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.183.1.3.1.1.18 |
cgprsAccPtUpstreamPacketCountThis object represents the total number of upstream
packets sent on this APN. Data flow from MS to PDN is
considered to be upstream traffic.
Trigger Condition: This counter is triggered when
upstream traffic is being routed to PDN.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.183.1.3.1.1.19 |
cgprsAccPtDownstreamPacketCountThis object represents the total number of downstream
packets sent on this APN. Data flow from PDN to MS is
considered to be downstream traffic.
Trigger Condition: This counter is triggered when
downstream traffic is being routed to PDN.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.183.1.3.1.1.20 |
cgprsAccPtDhcpAddrRequestsThis object represents the total number of DHCP
address request sent by the Gateway on this APN.
Trigger Condition: This counter is triggered by create
PDP or Bearer request message.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.183.1.3.1.1.21 |
cgprsAccPtSuccDhcpAddrRequestsThis object represents the total number of successful
DHCP address request sent by the Gateway on this APN.
Trigger Condition: This counter is triggered by create
PDP or Bearer request message.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.183.1.3.1.1.22 |
cgprsAccPtDhcpAddrReleasesThis object represents the total number of DHCP
address release request sent by the Gateway on this APN.
Trigger Condition: This counter is triggered by delete
PDP or Bearer request message.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.183.1.3.1.1.23 |
cgprsAccPtIpv6MsActivatedPdpsThis object indicates the total number of IPv6 PDP
or Bearer context activation procedures initiated by any MS on
this APN.
Trigger Condition: This counter is triggered by a request
message to create PDP or Bearer context.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.24 |
cgprsAccPtIpv6MsSuccActivatedPdpsThis object indicates the total number of successfully
completed IPv6 PDP or Bearer context activation procedures
initiated by MS on this APN.
Trigger Condition: This counter is triggered by create
PDP or Bearer response message sent by the Gateway.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.25 |
cgprsAccPtIpv6NetworkInitDeactPdpsThis object indicates the total number of IPv6 PDP
or Bearer context deactivation procedures initiated by network.
Trigger Condition: This counter is triggered by delete
PDP or Bearer request message by network.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.26 |
cgprsAccPtIpv6NetworkInitDeactSuccPdpsThis object indicates the total number of
successfully completed IPv6 PDP or Bearer context deactivation
procedures initiated by the network on this APN.
Trigger Condition: This counter is triggered by delete
PDP or Bearer response message by network.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.27 |
cgprsAccPtIpv6MsActivatedDynPdpsThis object indicates the total number of dynamic IPv6
PDP or Bearer context activation procedures initiated by the MS
on this APN. When a MS requests dynamic PDP or Bearer address
from the PLMN, a dynamic PDP or Bearer context activation
procedure is initiated.
Trigger Condition: This counter is triggered by create
PDP or Bearer request message, received by Gateway from an MS.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.28 |
cgprsAccPtIpv6MsSuccActivatedDynPdpsThis object indicates the total number of successfully
completed dynamic IPv6 PDP or Bearer context activation
procedures initiated by MS on this APN.
Trigger Condition: This counter is triggered by create
PDP or Bearer response message.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.29 |
cgprsAccPtIpv6MsDeactivatedPdpsThis object indicates the total number of IPv6 PDP
or Bearer context deactivation procedures initiated by the
MS on this APN.
Trigger Condition: This counter is triggered by delete
PDP or Bearer request message.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.30 |
cgprsAccPtIpv6MsSuccDeactivatedPdpsThis object indicates the total number of
successfully completed IPv6 PDP or Bearer context deactivation
procedures initiated by the MS on this APN.
Trigger Condition: This counter is triggered by delete
PDP or Bearer context response message.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.31 |
cgprsAccPtIpv6GgsnDeactivatedPdpsThis object indicates the total number of IPv6 PDP
context deactivation procedures initiated by the
Gateway on this APN.
Trigger Condition: This counter is triggered by delete
PDP request message, sent by the Gateway to a MME or SGSN.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.32 |
cgprsAccPtIpv6GgsnSuccDeactivatedPdpsThis object indicates the total number of
successfully completed IPv6 PDP context deactivation
procedures initiated by the Gateway on this APN.
Trigger Condition: This counter is triggered by delete
PDP response message, received by the Gateway from a
MME or SGSN.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.33 |
cgprsAccPtIpv6UpstreamTrafficVolumeThis object indicates the total payload volume in
upstream traffic sent on this APN. Data flow from
MS to PDN is considered to be upstream traffic.
Trigger Condition: This counter is triggered when
upstream traffic is being routed to PDN.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.183.1.3.1.1.34 |
cgprsAccPtIpv6DownstreamTrafficVolumeThis object indicates the total payload volume in
downstream traffic sent on this APN. Data flow from
PDN to MS is considered as downstream traffic.
Trigger Condition: This counter is triggered when
downstream traffic is being routed to PDN.ro Counter64 UNITS "bytes" .1.3.6.1.4.1.9.9.183.1.3.1.1.35 |
cgprsAccPtIpv6UpstreamPacketsThis object indicates the total number of upstream
packets sent on this APN. Data flow from MS to PDN is
considered to be upstream traffic.
Trigger Condition: This counter is triggered when
upstream traffic is being routed to PDN.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.183.1.3.1.1.36 |
cgprsAccPtIpv6DownstreamPacketsThis object represents the total number of downstream
packets sent on this APN. Data flow from PDN to MS is
considered to be downstream traffic.
Trigger Condition: This counter is triggered when
downstream traffic is being routed to PDN.ro Counter32 UNITS "packets" .1.3.6.1.4.1.9.9.183.1.3.1.1.37 |
cgprsAccPtPdpUpdateReqSentThis object represents the total number of PDP
or Bearer context update requests sent on this APN.
Trigger Condition: This counter is triggered when a
PDP or Bearer context update request is initiated.ro Counter32 UNITS "messages" .1.3.6.1.4.1.9.9.183.1.3.1.1.38 |
cgprsAccPtSuccPdpUpdateResRcvdThis object represents the total number of successful
PDP or Bearer context update responses received with a cause
value 'Request accepted' for the initiated update
requests on this APN.
Trigger condition: This counter is triggered when a
update response with cause value 'Request accepted' is
received on this APN.ro Counter32 UNITS "messages" .1.3.6.1.4.1.9.9.183.1.3.1.1.39 |
cgprsAccPtCoaRcvdThis object represents the total number of Change of
Authorization (COA) messages received on this APN.
Trigger condition: This counter is triggered when a COA
message is received.ro Counter32 UNITS "messages" .1.3.6.1.4.1.9.9.183.1.3.1.1.40 |
cgprsAccPtCoaSuccessThis object represents the number of COA messages
that were acknowledged by the Gateway with a COA ACK.
Trigger condition: This counter is triggered when a
COA ACK is sent by the Gateway.ro Counter32 UNITS "messages" .1.3.6.1.4.1.9.9.183.1.3.1.1.41 |
cgprsAccPtDtEnabledThis object represents the number of times Direct
tunnel is enabled for the PDP contexts on this APN
in Gateway.ro Counter32 UNITS "pdps" .1.3.6.1.4.1.9.9.183.1.3.1.1.42 |
cgprsAccPtTotalBearersThis object indicates the total number of Bearers
in this APN.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.43 |
cgprsAccPtTotRmtInitCreateBearersThis object indicates the total number of Bearer
creation initiated by MME, SGSN or MS.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.44 |
cgprsAccPtSuccRmtInitCreateBearersThis object indicates the total number of successful
Bearer creation initiated by MME, SGSN or MS.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.45 |
cgprsAccPtNetworkInitDeleteBearersThis object indicates the total number of Bearer
delete initiated by network.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.46 |
cgprsAccPtTotRmtInitModifyBearersThis object indicates the total number of Bearer
modify initiated by MME or SGSN.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.47 |
cgprsAccPtSuccRmtInitModifyBearersThis object indicates the total number of successful
Bearer modify initiated by MME or SGSN.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.48 |
cgprsAccPtTotNetworkInitUpdateBearersThis object indicates the total number of Bearer
update initiated by network.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.49 |
cgprsAccPtSuccNetworkInitUpdateBearersThis object indicates the total number of successful
Bearer update initiated by network.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.50 |
cgprsAccPtTotNetworkInitCreateDedBearersThis object indicates the total number of dedicated
Bearer creation initiated by network.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.51 |
cgprsAccPtSuccNetworkInitCreateDedBearersThis object indicates the total number of successful
dedicated Bearer creation initiated by network.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.52 |
cgprsAccPtTotNetworkInitCreateIPv6DedBearersThis object indicates the total number of IPv6
dedicated Bearer creation initiated by network.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.53 |
cgprsAccPtSuccNetworkInitCreateIPv6DedBearersThis object indicates the total number of IPv6
dedicated Bearer creation initiated by network.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.54 |
cgprsAccPtv4v6MsActivatedPdpsThis object indicates the total number of IPv4v6 PDP
or Bearer context activation procedures initiated by any MS on
this APN.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.55 |
cgprsAccPtv4v6SuccMsActivatedPdpsThis object indicates the total number of successfully
completed IPv4v6 PDP or Bearer context activation procedures
initiated by MS on this APN.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.56 |
cgprsAccPtv4v6MsDeactivatedPdpsThis object indicates the total number of IPv4v6 PDP
or Bearer context deactivation procedures initiated by the
MS on this APN.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.57 |
cgprsAccPtv4v6SuccMsDeactivatedPdpsThis object indicates the total number of
successfully completed IPv4v6 PDP or Bearer context
deactivation procedures initiated by the MS on this APN.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.58 |
cgprsAccPtv4v6ActDedbearerPdpsThis object indicates the total number of IPv4v6, dedicated
Bearer activations that were initiated by the PGW on this APN.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.59 |
cgprsAccPtv4v6SuccActDedbearerPdpsThis object indicates the total number of IPv4v6 dedicated
Bearers that were successfully activated by the PGW.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.60 |
cgprsAccPtDhcpProxServDiscoverThis object represents the number of DHCP Discover messages
received by the Gateway.
The UE sends this message upon bootup/lease rebinding timer
expiry.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.61 |
cgprsAccPtDhcpProxServRequestThis object represents the number of DHCP request messages
received by the Gateway.
The UE may send the DHCP-Request message with
Requested-IP-Address option in one of the many following
scenarios:
UE is rebooting and it has an IPv4-address with unexpired
lease.
UE is selecting an offer from the DHCP-server.
UE is renewing the lease.
UE is attempting to rebind the lease.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.62 |
cgprsAccPtDhcpProxServDeclinesThis object represents the number of DHCP decline messages
received by the Gateway from UE.
The UE may send this message when the IP-address it received is
found to be already in use by another device.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.63 |
cgprsAccPtDhcpProxServReleaseThis object represents the number DHCP - Release messages
received
by the Gateway.
The User Equipment may send this message when the IPv4-session
is terminated.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.64 |
cgprsAccPtDhcpProxServOfferThis object represents the number of DHCP offer messages sent
by the Gateway.
The Gateway sends this message on allocating a Requested IP
address to the User equipment.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.65 |
cgprsAccPtDhcpProxServAcksThis object represents the number of DHCP Acknowledge messages
sent by the Gateway.
The Gateway sends this message to the User equipment in response
to a DHCP-Request message.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.66 |
cgprsAccPtDhcpProxServNaksThis object represents the number of DHCP-Negative-Acknowledge
messages sent by the Gateway.
The Gateway sends DHCP-Negative acknowledge message to the User
Equipment in the following cases:
If the DHCP-Request contains an IP-address that is different
from the address that PGW sent in the DHCP-Offer.
If PGW is unable to allocate the offered IP-addressro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.67 |
cgprsAccPtDhcpProxServInformThis object represents the number of DHCP-Inform message sent
by the Gateway.
The Gateway shall respond with a DHCP-Acknowledge to the
DHCP-Inform message sent by the UEro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.68 |
cgprsAccPtDhcpProxServUnknowMsgThis object represents the number of DHCP-Unknown messages
received by the Gateway.
DHCP-Control messages, with unknown format are specified as
DHCP-uknown message.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.69 |
cgprsAccPtDhcpProxServRetryDropsThis object represents the number of times the Gateway has
retried to establish a connection with the Proxy server.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.70 |
cgprsAccPtDhcpProxServErrDropsThis object represents the number of times a DHCP proxy server
control message is dropped by the Gateway due to some error in
the message.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.71 |
cgprsAccPtActiveBearersThis object indicates the current number of active
Bearer on this APN.ro Gauge32 UNITS "bearers" .1.3.6.1.4.1.9.9.183.1.3.1.1.72 |
cgprsAccPtDhcpProxServTxErrDropsThis object represents the number of times an outgoing DHCP
proxy server control message is dropped by the Gateway due to
some failure in the Gateway.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.73 |
cgprsAccPtDhcpProxServIpAllocErrThis object represents the number of times an incoming DHCP
proxy server control message has been dropped by the Gateway
due to IP allocation error in the message.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.74 |
cgprsAccPtDedBearerDeactivationsThis object represents the total number dedicated bearer
deactivation request initiated by the Gateway.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.75 |
cgprsAccPtDedBearerQosUpdateThis object represents the total number of dedicated bearer
modification request with QoS change initiated by the Gateway.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.76 |
cgprsAccPtDedBearerSucQosUpdateThis object represents the total number of successful
dedicated bearer modification request with QoS change
initiated by the Gateway.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.77 |
cgprsAccPtDedBearerNoQosUpdateThis object represents the total number of dedicated bearer
modification request without QoS change initiated by the
Gateway.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.78 |
cgprsAccPtDedBearerSucNoQosUpdateThis object represents the total number of successful
dedicated bearer modification request without QoS change
initiated by the Gateway.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.79 |
cgprsAccPtIpv4v6MsActivatedDynamicPdpsThis object indicates the total number of IPv4v6 PDP
or Bearer context activation procedures initiated by any MS on
this APN.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.80 |
cgprsAccPtIpv4v6MsSuccActivatedDynamicPdpsThis object indicates the total number of successfully
completed IPv4v6 PDP or Bearer context activation procedures
initiated by MS on this APN.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.81 |
cgprsAccPtFailMsActivatedPdpsThis object indicates the total number of failed PDP or Bearer
context activation procedures initiated by MS on this APN.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.82 |
cgprsAccPtFailPdpUpdateThis object represents the total number of failed PDP or Bearer
context update for the initiated update requests on this APN.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.83 |
cgprsAccPtUpdateRspTimeOutThis object represents the total number of failed PDP or
Bearer context update response not received due to the time out
for the initiated update requests on this APN.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.1.1.84 |
cgprsAccPtDhcpv6ProxyStatsTableThis table contains the DHCPv6 proxy server
performance statistics for each APN on this Gateway. SEQUENCE OF CgprsAccPtDhcpv6ProxyStatsEntry .1.3.6.1.4.1.9.9.183.1.3.2 |
cgprsAccPtDhcpv6ProxyStatsEntryThere is an entry in this table for each APN in
the Gateway. CgprsAccPtDhcpv6ProxyStatsEntry .1.3.6.1.4.1.9.9.183.1.3.2.1 |
cgprsAccPtDhcpv6ProxInforeqRcvdThis object represents the total number of DHCPv6
information request message handled by the Gateway's
DHCPv6 proxy-client.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.2.1.1 |
cgprsAccPtDhcpv6ProxInforeqRplyThis object represents the total number of DHCPv6 response
message sent by the Gateway's DHCPv6 proxy-client.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.2.1.2 |
cgprsAccPtDhcpv6ProxInforeqLocRplyThis object represents the total number of times a local
response was sent for the DHCPv6 information request received
by the Gateway's DHCPv6 proxy-client.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.2.1.3 |
cgprsAccPtDhcpv6ProxIpAllocSucThis object represents the total number of times DHCPv6
IP allocation was successful.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.2.1.4 |
cgprsAccPtDhcpv6ProxIpAllocFailThis object represents the total number of times DHCPv6
IP allocation was failed.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.2.1.5 |
cgprsAccPtDhcpv6ProxIpReleaseThis object represents the total number of times an allocated
DHCPv6 IP was released.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.2.1.6 |
cgprsAccPtDhcpv6ProxIpRenewFailThis object represents the total number of times an allocated
DHCPv6 IP renewal was failed.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.2.1.7 |
cgprsAccPtDhcpv6ProxUnkwnMsgThis object represents the total number of times an unknown
message was handled by the Gateway's DHCPv6 proxy-client.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.2.1.8 |
cgprsAccPtDhcpv6ProxErrsThis object represents the total number of times an error
has occurred at the Gateway's DHCPv6 proxy-client.ro Counter32 .1.3.6.1.4.1.9.9.183.1.3.2.1.9 |
cgprsAccPtThruputStatsTableThis table contains the throughput statistics of
each APN on this Gateway. SEQUENCE OF CgprsAccPtThruputStatsEntry .1.3.6.1.4.1.9.9.183.1.3.3 |
cgprsAccPtThruputStatsEntryAn entry in this table. CgprsAccPtThruputStatsEntry .1.3.6.1.4.1.9.9.183.1.3.3.1 |
cgprsAccPtThruputIntervalThis object represents the time interval at which the
statistics are sampled. Interval configuration is out
of the scope of the MIB and are covered in
CISCO-GGSN-MIB. Integer32 .1.3.6.1.4.1.9.9.183.1.3.3.1.1 |
cgprsAccPtThruPutLastCollectedThis object represents the delta value between the time
when this data is collected and the time it is been
retrieved.ro Integer32 .1.3.6.1.4.1.9.9.183.1.3.3.1.2 |
cgprsAccPtUpstrByteCountThis object represents the total payload volume in
upstream traffic sent on this APN in the last sampling
period specified by cgprsAccPtThruputInterval.ro Gauge32 UNITS "bytes" .1.3.6.1.4.1.9.9.183.1.3.3.1.3 |
cgprsAccPtDownstrByteCountThis object represents the total payload volume in
downstream traffic sent on this APN in the last sampling
period specified by cgprsAccPtThruputInterval.ro Gauge32 UNITS "bytes" .1.3.6.1.4.1.9.9.183.1.3.3.1.4 |
cgprsAccPtUpstrPktCountThis object represents the number of upstream packets
sent on this APN in the last sampling period specified
by cgprsAccPtThruputInterval.ro Gauge32 UNITS "packets" .1.3.6.1.4.1.9.9.183.1.3.3.1.5 |
cgprsAccPtDownstrPktCountThis object represents the number of downstream packets
sent on this APN in the last sampling period specified
by cgprsAccPtThruputInterval.ro Gauge32 UNITS "packets" .1.3.6.1.4.1.9.9.183.1.3.3.1.6 |
ciscoGprsAccPtNotifInfo OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.183.1.4 |
cgprsAccPtMsAddrTypeThis object specifies the type of Internet address
denoted by cgprsAccPtMsAllocAddr, cgprsAccPtMsNewAddr
and cgprsAccPtMsTpduDstAddr.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.4.1 |
cgprsAccPtMsAllocAddrThis object specifies the IP address that is assigned
to the MS during PDP activation.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.4.2 |
cgprsAccPtMsNewAddrThis object specifies the fake IP address that is used
by the MS.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.4.3 |
cgprsAccPtMsTpduDstAddrThis object specifies the upstream TPDU destination
address used by a MS that falls in the reserved range
of IP addresses for PLMN devices.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.183.1.4.4 |
cgprsAccPtMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.183.2 |
cgprsAccPtMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.183.2.0 |
cgprsAccPtCfgNotifA notification of this type is generated when an
entry is generated in the
cgprsAccPtCfgNotifHistTable and
cgprsAccPtCfgNotifEnable is set to true. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.183.2.0.1 |
cgprsAccPtSecSrcViolNotifA notification of this type is generated when security
violation as specified by
cgprsAccPtVerifyUpStrTpduSrcAddr occurs on an APN. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.183.2.0.2 |
cgprsAccPtSecDestViolNotifA notification of this type is generated when security
violation as specified by
cgprsAccPtVerifyUpStrTpduDstAddr occurs on an APN. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.183.2.0.3 |
cgprsAccPtMaintenanceNotifA notification of this type is generated when APN is
placed in maintenance mode which is specified by
cgprsAccPtOperationMode. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.183.2.0.4 |
cgprsAccPtInServiceNotifA notification of this type is generated when APN is
placed in in-service mode which is specified by
cgprsAccPtOperationMode. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.183.2.0.5 |
cgprsAccPtConformances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.183.3 |
cgprsAccPtMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.183.3.1 |
cgprsAccPtMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.183.3.2 |