CISCO-GGSN-MIB
AI MIB Summary
The CISCO-GGSN-MIB enables monitoring and management of Cisco Gateway GPRS Support Node (GGSN) devices, specifically tracking GTP v0/v1 tunnel states, Packet Data Protocol (PDP) context statistics, Traffic Flow Template (TFT) filter matches, and Access Point Name (APN) configurations. This module facilitates the observation of charging data records (CDR), policy enforcement points (PEP), and alarm notifications to ensure proper interworking between mobile networks and external packet-data networks.
This MIB module manages the Gateway GPRS Support Node (GGSN) devices.
A GGSN device provides interworking with external packet-data network of a particular GPRS service provider. It provides a combination of IP routing and GPRS specific functionality to support mobile users.
GTP version1 is introduced in UMTS release 99 and Cisco GGSN will support both GTP version 1 (GTP v1) and version zero (GTP v0) simultaneously.
GTP v1 supports multiple PDP contexts sharing one IP address. TFTs are introduced to achieve this. Each TFT is associated with a PDP context and there may exist one PDP context without TFT amongst all PDP contexts sharing the same IP address. Each TFT has one to eight packet filters each assigned with a precedence index. These packet filters are evaluated one at a time against the packet header information in sequence of their precedence index. A match is claimed if all the filters are matched and the PDP context that the TFT belongs to will be selected, else the checks are performed against the filters of another PDP context. If the packet header doesn't contain any TFT packet filter information, then the PDP context without the TFT is selected for further processing.
Note on notifications:
When an alarm occurs on the device, if the alarm's severity is higher than the severity filter threshold, a notification is generated by the device; and if cGgsnNotifEnabled is 'true', then the device's SNMP-engine configuration will be searched to determine where to send the notification.
Acronyms and terms:
APN Access Point Name CSG Content Service Gateway CDR Charging Data Record DCCA Diameter Credit Control Application ETSI European Telecommunications Standards Institute GGSN Gateway GPRS Support Node GPRS General Packet Radio Service GSM Global System for Mobile communication GTP GPRS Tunneling Protocol G-PDU GTP PDU IE Information Element MS Mobile Station MSISDN Mobile Station ISDN number PDP Packet Data Protocol PDU Protocol Data Unit PLMN Public Land Mobile Network SGSN Serving GPRS support Node SLB Server Load Balancing TFT Traffic Flow Template T-PDU the payload of G-PDU UMTS Universal Mobile Telecommunications System IMS IP Multimedia Subsystem COPS Common Open Policy Service protocol PEP Policy Enforcement Point PDF Policy Decision Function P-CSCF Proxy Call Session Control Function PLMN Public Land Mobile Network QS Quota Server UE User Equipment
REFERENCE
[1] GSM 03.60: Digital cellular telecommunications system (Phase 2+); General Packet Radio Service (GPRS); Service description; Stage 2. V7.1.0
[2] GSM 09.60: Digital cellular telecommunication system (Phase 2+); General Packet Radio Service (GPRS); GPRS Tunnelling Protocol (GTP) across Gn and Gp Interface. V7.3.0
[3] 3GPP; Technical Specification Group Services and System Aspects; QoS Concept and Architecture. 3G TS 23.107 v3.2.0.
[4] 3GPP; Technical Specification Group Core Network; General Packet Radio Service(GPRS); GPRS Tunnelling Protocol (GTP) across Gn and Gp Interface (Release 1999). 3G TS 29.060 v3.5.0.
[5] 3GPP: Technical Specification Group Core Network; Policy control over Go interface (Release 5). 3GPP TS 29.207 V5.2.0
93
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
93 total| Object Name |
|---|
cGgsnMIB OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.240 |
RFC1155-SMI Unknown .1.3.6.1.4.1.9.9.240 |
cGgsnMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.240.1 |
cGgsnStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.240.1.1 |
cGgsnSentSigMessagesThe number of GTP signalling messages sent.ro Counter -- Units -- packets .1.3.6.1.4.1.9.9.240.1.1.1 |
cGgsnReceivedSigMessagesThe number of GTP signalling messages received.ro Counter -- Units -- packets .1.3.6.1.4.1.9.9.240.1.1.2 |
cGgsnUnexpectedSigMessagesThe number of unexpected GTP signalling messages received.ro Counter -- Units -- packets .1.3.6.1.4.1.9.9.240.1.1.3 |
cGgsnSentGPDUsThe number of G-PDU messages sent.ro Counter -- Units -- packets .1.3.6.1.4.1.9.9.240.1.1.4 |
cGgsnReceivedGPDUsThe number of G-PDU messages received.ro Counter -- Units -- packets .1.3.6.1.4.1.9.9.240.1.1.5 |
cGgsnSentGPDUOctetsThe number of total bytes sent in G-PDU messages.ro Counter -- Units -- bytes .1.3.6.1.4.1.9.9.240.1.1.6 |
cGgsnReceivedGPDUOctetsThe number of total bytes received in G-PDU messages.ro Counter -- Units -- bytes .1.3.6.1.4.1.9.9.240.1.1.7 |
cGgsnUnexpectedGPDUsThe number of unexpected G-PDU messages, for example,
non existent PDP contexts and ACL denial.ro Counter -- Units -- packets .1.3.6.1.4.1.9.9.240.1.1.8 |
cGgsnActivationRejectedPdpsThe number of PDP contexts that the activation request
was rejected.ro Counter -- Units -- packets .1.3.6.1.4.1.9.9.240.1.1.9 |
cGgsnOutOfResourcePdpsThe number of PDP contexts that the activation request
rejected due to the GGSN running out of resources for
transmitting GTP packets. Examples:
- Out of memory;
- The number of PDPs on GGSN reached limit;
- all dynamic PDP address are occupied;ro Counter -- Units -- packets .1.3.6.1.4.1.9.9.240.1.1.10 |
cGgsnParserErrorMessagesThe number of GTP messages received with wrong value.
It includes the following cases:
- mandatory and optional information element in the GTP
packet is duplicated, missing, unknown, incorrect or
out of order.
- the GTP message is too short to hold the GTP header for
the supported version.
- the GTP messages running an unsupported version of GTP.
- Unknown GTP message type.ro Counter -- Units -- packets .1.3.6.1.4.1.9.9.240.1.1.11 |
cGgsnTotalCreatedPdpsThis object represents the total number of PDP contexts
created.ro Counter -- Units -- packets .1.3.6.1.4.1.9.9.240.1.1.12 |
cGgsnTotalDeletedPdpsThis object represents the total number of PDP contexts
deleted.ro Counter -- Units -- packets .1.3.6.1.4.1.9.9.240.1.1.13 |
cGgsnTotalNetworkInitPdpsThis object represents the total number of PDP contexts
activated by the GGSN that were initiated by the PDN.ro Counter -- Units -- packets .1.3.6.1.4.1.9.9.240.1.1.14 |
cGgsnTotalPppPdpsCreatedThis object represents the total number of PPP PDP
contexts created.ro Counter -- Units -- packets .1.3.6.1.4.1.9.9.240.1.1.15 |
cGgsnTotalPppPdpsDeletedThis object represents the total number of PPP PDP
contexts deleted.ro Counter -- Units -- packets .1.3.6.1.4.1.9.9.240.1.1.16 |
cGgsnOutOfResourcePppRegenPdpsThis object represents the total number of create PDP
context and delete PDP context requests rejected due to
unavailable resource on the GGSN for PPP regeneration.ro Counter -- Units -- packets .1.3.6.1.4.1.9.9.240.1.1.17 |
cGgsnDroppedPppRegenPdpsThis object represents the total number of create PDP
context and delete PDP context requests that were dropped
due to the threshold limit being reached for maximum number
of PPP regeneration sessions allowed on the GGSN.ro Counter -- Units -- packets .1.3.6.1.4.1.9.9.240.1.1.18 |
cGgsnTftSemanticErrorPdpsThis object represents the total number of received PDP
context messages that had TFTs with semantic errors.ro Counter .1.3.6.1.4.1.9.9.240.1.1.19 |
cGgsnTftSyntacticErrorPdpsThis object represents the total number of received PDP
context messages that had TFTs with syntactic errors.ro Counter .1.3.6.1.4.1.9.9.240.1.1.20 |
cGgsnPktFilterSemanticErrorPdpsThis object represents the total number of received PDP
context messages that had packet filters with semantic errors.ro Counter .1.3.6.1.4.1.9.9.240.1.1.21 |
cGgsnPktFilterSyntacticErrorPdpsThis object represents the total number of received PDP
context messages that had packet filters with syntactic
errors.ro Counter .1.3.6.1.4.1.9.9.240.1.1.22 |
cGgsnNotifMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.240.1.2 |
cGgsnNotifEnabledIndicates whether cGgsnNotification notification will
be sent when a notification is generated by the device.
- 'true', it will enable the device to send a notification,
as well as logging the notification to the
cGgsnHistNotifTable.
- 'false', it will prevent the device from sending out a
notification, but it will still log the
notification into cGgsnHistNotifTable.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.9.9.240.1.2.1 |
cGgsnNotifLeastSeverLevelIndicates the least severity level of the cGgsnNotification
notifications to be generated by the device. Thus, notifications
are not generated for alarms with a severity level less urgent
than the value of this object. This object cannot be set to
cleared(1) or indeterminate(2).rw CiscoAlarmSeverity -- Rsyntax INTEGER { -- cleared(1), -- indeterminate(2), -- critical(3), -- major(4), -- minor(5), -- warning(6), -- info(7) -- } .1.3.6.1.4.1.9.9.240.1.2.2 |
cGgsnGeneratedNotifsThe number of cGgsnNotification notifications that have
been generated since sysUpTime.ro Counter -- Units -- notifications .1.3.6.1.4.1.9.9.240.1.2.3 |
cGgsnIgnoredAlarmsThe number of alarms which are less severe than
cGgsnNotifLeastSeverLevel since sysUpTime, and thus,
for which no notification was generated.ro Counter -- Units -- notifications .1.3.6.1.4.1.9.9.240.1.2.4 |
cGgsnHistNotifMaxLengthThe maximum number of entries to be retained in the
cGgsnHistNotifTable. When the table is full, the oldest
entries are removed to make space for new entries.rw INTEGER .1.3.6.1.4.1.9.9.240.1.2.5 |
cGgsnHistNotifLatestIndexThe value of cGgsnHistNotifIndex for the most recently
created entry in cGgsnHistNotifTable.ro Gauge .1.3.6.1.4.1.9.9.240.1.2.6 |
cGgsnHistNotifTableA history table of the most recent cGgsnNotification
notifications generated by this device.
If a new cGgsnNotification notification is generated when
the number of entries is equal to cGgsnHistNotifMaxLength,
then the oldest entry is deleted and replaced with an entry
for the latest notification. SEQUENCE OF CGgsnHistNotifEntry .1.3.6.1.4.1.9.9.240.1.2.7 |
cGgsnHistNotifEntryDetailed information concerning a particular notification
that previously generated from this device. CGgsnHistNotifEntry .1.3.6.1.4.1.9.9.240.1.2.7.1 |
cGgsnHistNotifIndexA monotonically increasing integer for the sole purpose of
indexing notifications. When it reaches the maximum value,
it wraps the value back to 1. Gauge .1.3.6.1.4.1.9.9.240.1.2.7.1.1 |
cGgsnHistNotifTypeThis object indicates the type of notification.ro Enumeration .1.3.6.1.4.1.9.9.240.1.2.7.1.2 |
cGgsnHistNotifSeverityThis object indicates the severity level of the
notification. This object cannot be set to cleared(1)
or indeterminate(2).ro CiscoAlarmSeverity -- Rsyntax INTEGER { -- cleared(1), -- indeterminate(2), -- critical(3), -- major(4), -- minor(5), -- warning(6), -- info(7) -- } .1.3.6.1.4.1.9.9.240.1.2.7.1.3 |
cGgsnHistNotifTimestampThis object indicates the value of sysUpTime when
this notification was generated.ro TimeStamp -- Rsyntax TimeTicks .1.3.6.1.4.1.9.9.240.1.2.7.1.4 |
cGgsnHistNotifGgsnIpAddrTypeThis object indicates the type of Internet address
by which cGgsnHistNotifGgsnIpAddr is reachable.ro InetAddressType -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- unknown(0), -- ipv4(1), -- ipv6(2), -- dns(16) -- } .1.3.6.1.4.1.9.9.240.1.2.7.1.5 |
cGgsnHistNotifGgsnIpAddrThe object indicates the IP address that uniquely
identifies the device which generated the notification.ro InetAddress -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.9.240.1.2.7.1.6 |
cGgsnHistNotifInfoA textual description of cGgsnHistNotifType, which
potentially contains additional information (more than
just the type of alarm).
If the text of the message exceeds 64 bytes, the message
will be truncated to 63 bytes and a '*' character will
be appended to indicate the message has been truncated.ro DisplayString .1.3.6.1.4.1.9.9.240.1.2.7.1.7 |
cGgsnConfigurations OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.240.1.3 |
cGgsnDefaultIpAllocationMethodSpecifies the default method by which the GGSN obtains
address leases for mobile user sessions.
- 'disable', which indicates that dynamic address
allocation is disabled.
- 'dhcp', which indicates that the DHCP server
will be used.
- 'radius', which indicates that the radius server
will be used.rw Enumeration .1.3.6.1.4.1.9.9.240.1.3.1 |
cGgsnIdlePdpPurgeTimerThis object specifies the time that the GGSN waits
before purging idle PDP contexts. A value '0' will
disable the purge timer.rw Gauge .1.3.6.1.4.1.9.9.240.1.3.2 |
cGgsnIpDupProtectTableThis table contains the range of IP address used in the
GPRS PLMN. These IP addresses are used to avoid IP address
duplication in GPRS network. IP address duplication occurs
when a MS uses an IP address which is already used in the PLMN.
The IP addresses configured inside GPRS network should be in
these ranges and MS IP address should not be in this range. SEQUENCE OF CGgsnIpDupProtectEntry .1.3.6.1.4.1.9.9.240.1.3.3 |
cGgsnIpDupProtectEntryEntry containing the start and end IP address in the address
range. An Entry with start IP > end IP is not allowed.
No new entry will be accepted if that would cause any IP
address(es) to be represented by more than one row in this
table. CGgsnIpDupProtectEntry .1.3.6.1.4.1.9.9.240.1.3.3.1 |
cGgsnMsExcludeRangeStartIpTypeThe type of Internet address by which
cGgsnMsExcludeRangeStartIp is reachable. The value of this
object should be same as cGgsnMsExcludeRangeEndIpType.
Only ipv4(1) addresses are supported. InetAddressType -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- unknown(0), -- ipv4(1), -- ipv6(2), -- dns(16) -- } .1.3.6.1.4.1.9.9.240.1.3.3.1.1 |
cGgsnMsExcludeRangeStartIpStarting IP address in the address range. InetAddress .1.3.6.1.4.1.9.9.240.1.3.3.1.2 |
cGgsnMsExcludeRangeEndIpTypeThe type of Internet address by which cGgsnMsExcludeRangeEndIp
is reachable. The value of this object should be same as
cGgsnMsExcludeRangeStartIpType. Only ipv4(1) addresses are
supported. InetAddressType -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- unknown(0), -- ipv4(1), -- ipv6(2), -- dns(16) -- } .1.3.6.1.4.1.9.9.240.1.3.3.1.3 |
cGgsnMsExcludeRangeEndIpEnding IP address in the address range. InetAddress .1.3.6.1.4.1.9.9.240.1.3.3.1.4 |
cGgsnIpDupProtectRowStatusThis object is used to create a new row or delete an
existing row in this table.
To create a row, set this object to 'createAndGo'.
To delete a row, set this object to 'destroy'.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.4.1.9.9.240.1.3.3.1.5 |
cGgsnDefaultAggregTableThis table contains the list of default aggregate routes
configured on the GGSN. GGSN uses a static host route to
forward user data packets for each PDP context received
from Gi interface to Gn interface. Using the aggregate
route (address range), the total number of static routes
implemented in the GGSN for PDP requests can be greatly
reduced. SEQUENCE OF CGgsnDefaultAggregEntry .1.3.6.1.4.1.9.9.240.1.3.4 |
cGgsnDefaultAggregEntryAn Entry contains the IP network prefix which is used to
combine the routes of PDP requests for the same network as
a single route on the GGSN. CGgsnDefaultAggregEntry .1.3.6.1.4.1.9.9.240.1.3.4.1 |
cGgsnDefaultAggregIpAddrTypeThis object specifies the type of Internet address denoted by
cGgsnDefaultAggregIpAddr. Only ipv4(1) addresses are supported. InetAddressType -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- unknown(0), -- ipv4(1), -- ipv6(2), -- dns(16) -- } .1.3.6.1.4.1.9.9.240.1.3.4.1.1 |
cGgsnDefaultAggregIpAddrThis object specifies the IP address whose network prefix
is going to be defined by cGgsnDefaultAggregIpMask. InetAddress .1.3.6.1.4.1.9.9.240.1.3.4.1.2 |
cGgsnDefaultAggregIpMaskThis object specifies the net-mask pertaining to
cGgsnDefaultAggregIpAddr. CiscoInetAddressMask -- Rsyntax Gauge .1.3.6.1.4.1.9.9.240.1.3.4.1.3 |
cGgsnDefaultAggregRowStatusThis object is used to create a new row or delete an
existing row in this table.
To create a row, set this object to 'createAndGo'.
To delete a row, set this object to 'destroy'.
The values 'createAndWait' and 'notInService' are
not supported.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.4.1.9.9.240.1.3.4.1.4 |
cGgsnDefaultAaaAuthServerGroupThis object specifies the AAA radius server group
that is used for authentication by all APN's on this GGSN.rw DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.9.240.1.3.5 |
cGgsnDefaultAaaAccServerGroupThis object specifies the AAA radius server group
that is used for accounting by all APN's on this GGSN.rw DisplayString -- Rsyntax OCTET STRING .1.3.6.1.4.1.9.9.240.1.3.6 |
cGgsnPppVirtualTemplateThis object represents the virtual template interface used
by PPP Type PDP's.rw InterfaceIndexOrZero -- Rsyntax INTEGER .1.3.6.1.4.1.9.9.240.1.3.7 |
cGgsnPppRegenVirtualTemplateThis object represents the virtual template interface used
for PPP Regeneration by the APN's on which PPP Regeneration
is configured.
The value zero indicates that no interface is specified.rw InterfaceIndexOrZero -- Rsyntax INTEGER .1.3.6.1.4.1.9.9.240.1.3.8 |
cGgsnPlmnIpAddrRangeTableThis table contains the range of IP addresses that belong
to the PLMN nodes in a GPRS network. This range does not
include address of various entities like RADIUS, DHCP, DNS
servers, etc., which are not part of PLMN. SEQUENCE OF CGgsnPlmnIpAddrRangeEntry .1.3.6.1.4.1.9.9.240.1.3.9 |
cGgsnPlmnIpAddrRangeEntryEntry containing the first and last IP address in the address
range. An Entry with first-IP > last-IP is not allowed. No
new entry will be accepted if that would cause any IP
address(es) to be represented by more than one row in this
table. CGgsnPlmnIpAddrRangeEntry .1.3.6.1.4.1.9.9.240.1.3.9.1 |
cGgsnPlmnAddrRangeIpAddrTypeThe address type for cGgsnPlmnAddrRangeFirstIp and
cGgsnPlmnAddrRangeLastIp addresses. Only ipv4(1) addresses are
supported. InetAddressType -- Rsyntax INTEGER { -- ?? enum value of zero may cause problems -- unknown(0), -- ipv4(1), -- ipv6(2), -- dns(16) -- } .1.3.6.1.4.1.9.9.240.1.3.9.1.1 |
cGgsnPlmnAddrRangeFirstIpFirst IP address in the address range. InetAddress .1.3.6.1.4.1.9.9.240.1.3.9.1.2 |
cGgsnPlmnAddrRangeLastIpLast IP address in the address range. InetAddress .1.3.6.1.4.1.9.9.240.1.3.9.1.3 |
cGgsnPlmnAddrRangeRowStatusThis object is used to create a new row or delete an
existing row in this table.
To create a row, set this object to 'createAndGo'.
To delete a row, set this object to 'destroy'.
To modify a row, the row needs to be deleted and created fresh
with new values.rw RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- } .1.3.6.1.4.1.9.9.240.1.3.9.1.4 |
cGgsnPlmnAddrRangeUsageThis object specifies how the address range will be used by
the GGSN.
When set to 'security', the address range is used for GGSN
security feature i.e. any TPDU with destination address that
falls in this address range will be discarded.
When set to 'sgsn', the address range denotes the sgsn address
range in the local PLMN which can be used to check roaming MS.rw Enumeration .1.3.6.1.4.1.9.9.240.1.3.9.1.5 |
cGgsnStatus OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.240.1.4 |
cGgsnVersionThis object specifies the which release of GPRS
image is currently running on the GGSN.ro Enumeration .1.3.6.1.4.1.9.9.240.1.4.1 |
cGgsnActiveNetworkInitPdpsThis object represents the number of network initiated
PDP contexts that are currently active.ro Gauge -- Units -- packets .1.3.6.1.4.1.9.9.240.1.4.2 |
cGgsnActivePppPdpsThis object represents the number of PPP PDP contexts
that are currently active.ro Gauge -- Units -- packets .1.3.6.1.4.1.9.9.240.1.4.3 |
cGgsnActivePppRegenPdpsThis object represents the number of PPP-Regen PDP contexts
that are currently active.ro Gauge -- Units -- packets .1.3.6.1.4.1.9.9.240.1.4.4 |
cGgsnPendingPppRegenPdpsThis object represents the current number of pending
PPP regeneration sessions.ro Gauge -- Units -- packets .1.3.6.1.4.1.9.9.240.1.4.5 |
cGgsnActiveGtpVersion0PdpsThis object represents the current number of active GTP v0 PDP
contexts.ro Gauge .1.3.6.1.4.1.9.9.240.1.4.6 |
cGgsnActiveGtpVersion1PdpsThis object represents the current number of active GTP v1 PDP
contexts.ro Gauge .1.3.6.1.4.1.9.9.240.1.4.7 |
cGgsnGtpEncapInterfaceThis object represents the ifIndex of the interface on which
which gtp encapsulation is configured. Only one interface can
be configured with gtp encapsulation on the GGSN. A zero value
indicates that no interface is configured with gtp
encapsulation.ro InterfaceIndexOrZero -- Rsyntax INTEGER .1.3.6.1.4.1.9.9.240.1.4.8 |
cGgsnNotifPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.240.2 |
cGgsnNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.240.2.0 |
cGgsnNotificationThis notification indicates the occurrence of a GGSN
related alarm. If and when additional useful information
is available for specific types of alarms, then that
information may be appended to the end of the
notification in additional varbinds. TRAP-TYPE .1.3.6.1.4.1.9.9.240.2.0.1 |
cGgsnMIBConformances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.240.3 |
cGgsnMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.240.3.1 |
cGgsnMIBCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.240.3.1.1 |
cGgsnMIBComplianceRev1 OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.240.3.1.2 |
cGgsnMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.240.3.2 |
cGgsnStatisticsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.240.3.2.1 |
cGgsnNotifMgmtGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.240.3.2.2 |
cGgsnConfigurationsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.240.3.2.3 |
cGgsnNotifGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.240.3.2.4 |
cGgsnStatusGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.240.3.2.5 |
cGgsnConfigurationsGroupRev1 OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.240.3.2.6 |
cGgsnUmtsGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.240.3.2.7 |