CISCO-FCIP-MGMT-EXT-MIB
AI MIB Summary
The CISCO-FCIP-MGMT-EXT-MIB extends the standard Cisco FCIP management capabilities to expose proprietary interface-specific metrics and operational states for Cisco Fibre Channel over IP (FCIP) tunneling devices. This module enables granular monitoring of FCIP session parameters, link statistics, and interface attributes not covered by the base MIB, facilitating precise troubleshooting of FCIP tunnel performance and connectivity.
A MIB module for extending the CISCO-FCIP-MGMT-MIB to add objects which provide additional information about FCIP interfaces not available in other MIBS.
Main OID:
ciscoFcipMgmtExtMIB.1.3.6.1.4.1.9.9.329
59
Objects
Active
Status
10
Dependencies
Imported Objects
Objects
59 total| Object Name |
|---|
ciscoFcipMgmtExtMIBA MIB module for extending the CISCO-FCIP-MGMT-MIB
to add objects which provide additional information
about FCIP interfaces not available in other MIBS. MODULE-IDENTITY .1.3.6.1.4.1.9.9.329 |
IMPORTSA MIB module for extending the CISCO-FCIP-MGMT-MIB
to add objects which provide additional information
about FCIP interfaces not available in other MIBS. Unknown .1.3.6.1.4.1.9.9.329 |
ciscoFcipMgmtExtMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.329.0 |
ciscoFcipMgmtExtMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.329.1 |
cfmFcipMgmtExtConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.329.1.1 |
cfmFcipEntityExtTableA table contains objects which provide more information
of FCIP entity which is not available in
CISCO-FCIP-MGMT-MIB. SEQUENCE OF CfmFcipEntityExtEntry .1.3.6.1.4.1.9.9.329.1.1.1 |
cfmFcipEntityExtEntryA entry into the cfmFcipEntityExtTable. Each entry
contains attributes associated with an FCIP entity. CfmFcipEntityExtEntry .1.3.6.1.4.1.9.9.329.1.1.1.1 |
cfmFcipEntityExtTcpKeepAliveTOThe TCP Keep alive timeout for all links within this
entity.rw Unsigned32 .1.3.6.1.4.1.9.9.329.1.1.1.1.1 |
cfmFcipEntityExtTcpMaxReTxThe Maximum number of times that the same item of data
will be retransmitted over a TCP connection. If delivery
is not acknowledged after this number of retransmissions
then the TCP connection is terminated.rw Unsigned32 .1.3.6.1.4.1.9.9.329.1.1.1.1.2 |
cfmFcipEntityExtPMTUEnableThe path MTU discovery is enabled if the value of
this object is true(1), else it is disabled, and
has the value false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.329.1.1.1.1.3 |
cfmFcipEntityExtPMTUResetTOThe time interval for which the discovered pathMTU
is valid, before MSS reverts back to the negotiated
TCP value. This object is writeble only if
cfmFcipEntityExtPMTUEnable is 'true'.rw Unsigned32 .1.3.6.1.4.1.9.9.329.1.1.1.1.4 |
cfmFcipEntityExtTcpMinRTOThe TCP minimum retransmit timeout for all the links on
this entity.rw Unsigned32 .1.3.6.1.4.1.9.9.329.1.1.1.1.5 |
cfmFcipEntityExtTcpSendBufSizeThe aggregate TCP send window for all TCP connections on all
Links within this entity. This value is used for Egress
Flow Control. When the aggregate of the data queued
on all connections within this entity reaches this value,
the sender is flow controlled.rw Unsigned32 .1.3.6.1.4.1.9.9.329.1.1.1.1.6 |
cfmFcipEntityExtTcpMaxBWThis is an estimate of the Bandwidth of the network pipe
used for the B-D product computation, which lets us derive
the TCP receive window to advertise.
The cfmFcipEntityExtTcpMaxBW,cfmFcipEntityExtTcpMinAvailBW,
cfmFcipEntityExtTcpRndTrpTimeEst must be set in the same
SNMP set request. SET operation would fail if this object
is set individually.rw Unsigned32 .1.3.6.1.4.1.9.9.329.1.1.1.1.7 |
cfmFcipEntityExtTcpMinAvailBWThe minimum available bandwidth for the TCP connections
on the Links within this entity.
The cfmFcipEntityExtTcpMaxBW,cfmFcipEntityExtTcpMinAvailBW,
cfmFcipEntityExtTcpRndTrpTimeEst must be set in the same
SNMP set request. SET operation would fail if this object
is set individually.rw Unsigned32 .1.3.6.1.4.1.9.9.329.1.1.1.1.8 |
cfmFcipEntityExtTcpRndTrpTimeEstThis is an estimate of the round trip delay of the network
pipe used for the B-D product computation, which lets us
derive the TCP receive window to advertise.
The cfmFcipEntityExtTcpMaxBW,cfmFcipEntityExtTcpMinAvailBW,
cfmFcipEntityExtTcpRndTrpTimeEst must be set in the same
SNMP set request. SET operation would fail if this object
is set individually.rw Unsigned32 .1.3.6.1.4.1.9.9.329.1.1.1.1.9 |
cfmFcipEntityExtCWMEnableThis object is used for enabling/disabling the congestion
window monitoring. If the value of this object is true(1),
it is enabled. It is disabled if the value is false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.329.1.1.1.1.10 |
cfmFcipEntityExtCWMBurstSizeThe maximum burst sent after a tcp sender idle
period. This object is writeble only if
cfmFcipEntityExtCWMEnable is 'true'.rw Unsigned32 .1.3.6.1.4.1.9.9.329.1.1.1.1.11 |
cfmFcipEntityExtTcpSACKEnableSetting the value to 'True', enables the Selective
Acknowledgement (SACK) on this link.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.329.1.1.1.1.12 |
cfmFcipEntityExtTcpLocalPortThe local TCP port to which the local FCIP entity will
connect if and when it initiates a TCP connection setup
for this link.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.329.1.1.1.1.13 |
cfmFcipEntityExtTcpMaxJitterThe maximum delay variation that is not due to
congestion that can be experienced by TCP
connections for all links on this entity.rw Unsigned32 .1.3.6.1.4.1.9.9.329.1.1.1.1.14 |
cfmFcipLinkExtTableA table contains objects which provide more information
of FCIP link which is not available in CISCO-FCIP-MGMT-MIB. SEQUENCE OF CfmFcipLinkExtEntry .1.3.6.1.4.1.9.9.329.1.1.2 |
cfmFcipLinkExtEntryA entry into cfmFcipLinkExtTable. Each entry
contains attributes associated with an FCIP Link. CfmFcipLinkExtEntry .1.3.6.1.4.1.9.9.329.1.1.2.1 |
cfmFcipLinkExtPassiveModeIf the value is set to 'false' this link endpoint actively
tries to connect to the peer. If it is set to 'true' the link
endpoint waits for the peer to connect to it.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.329.1.1.2.1.1 |
cfmFcipLinkExtNumTcpConnThe maximum number of TCP connections allowed on this
link.rw Unsigned32 .1.3.6.1.4.1.9.9.329.1.1.2.1.2 |
cfmFcipLinkExtCheckTimestampThe value is 'true', if the timestamp in FCIP header
is to checked. If 'false' the timestamp is ignored.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.329.1.1.2.1.3 |
cfmFcipLinkExtTimestampToleranceThe accepted time difference between the local time
and the timestamp value received in the FCIP header.
By default this value will be EDTOV/2. EDTOV is the
Error_Detect_Timeout Value used for Fibre channel Ports
as the timeout value for detecting an error condition.rw Unsigned32 .1.3.6.1.4.1.9.9.329.1.1.2.1.4 |
cfmFcipLinkExtTcpRemPortThe remote TCP port to which the local FCIP entity will
connect if and when it initiates a TCP connection setup
for this link.rw CiscoPort .1.3.6.1.4.1.9.9.329.1.1.2.1.5 |
cfmFcipLinkExtLocalBPortEnableIf the value is set to 'true', the B port mode is enabled
on the local FCIP link. If set to 'false' the B port mode
is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.329.1.1.2.1.6 |
cfmFcipLinkExtSpecialFrameEnableIf the value is set to 'true', the TCP active opener
initiates FCIP special frames and the TCP passive
opener responds to the FCIP special frames.
If it is set to 'false', the FCIP special frames are
neither generated nor responded to.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.329.1.1.2.1.7 |
cfmFcipLinkExtBPortKAEnableIf the value is set to 'true', a message is
sent in response to a (Fibre Channel) ELS Echo
frame received from the peer. Some B Port
implementations use ELS Echo request/response frames
as Link Keep Alive.
If it is set to 'false', this response is not
generated.
This object is valid only if the
cfmFcipLinkExtLocalBPortEnable is 'true'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.329.1.1.2.1.8 |
cfmFcipLinkExtCntrlQOSFieldThe value to be set for the TOS field in IP header
for the TCP control connection.
The cfmFcipLinkExtCntrlQOSField,cfmFcipLinkExtDataQOSField
must be set in the same SNMP set request. SET operation would
fail if this object is set individually.rw Unsigned32 .1.3.6.1.4.1.9.9.329.1.1.2.1.9 |
cfmFcipLinkExtDataQOSFieldThe value to be set for the TOS field in IP header
for the TCP Data connection.
The cfmFcipLinkExtCntrlQOSField,cfmFcipLinkExtDataQOSField
must be set in the same SNMP set request. SET operation would
fail if this object is set individually.rw Unsigned32 .1.3.6.1.4.1.9.9.329.1.1.2.1.10 |
cfmFcipLinkExtEthIfIndexThe ifIndex of the interface on which this FCIP link was
initiated.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.9.9.329.1.1.2.1.11 |
cfmFcipLinkExtWriteAcceleratorThe Write accelerator allows for enhancing SCSI write
performance.
If 'true', the FCIP Write accelerator is enabled on this link
If 'false' it is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.329.1.1.2.1.12 |
cfmFcipLinkExtIPCompThe configuration for the IP compression.
'none' - ip compression is disabled.
'highCompressionRatio' - indicates better compression
performance at the cost of lower
throughput.
'highThroughput' - indicates better throughput at
the cost of lower compression
performance.
'auto' - indicates that an appropriate
mode wll be picked based on
the bandwidth and data.
'mode1' - fast compression mode for high
bandwidth WAN links with bandwidth
greater than 30 Mbps.
'mode2' - high compression mode for
moderately low bandwidth WAN links,
i.e. bandwidth between 15 and 30
Mbps.
'mode3' - high compression mode for
low bandwidth WAN links,
i.e. banwidth less than 15 Mbps.rw Enumeration .1.3.6.1.4.1.9.9.329.1.1.2.1.13 |
cfmFcipLinkExtTapeAcceleratorThe Tape accelerator allows for enhancing Tape write
performance.
If 'true', the FCIP Tape accelerator is enabled on this link
If 'false' it is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.329.1.1.2.1.14 |
cfmFcipLinkExtFlowCtrlBufSizeThe flow control buffer size.rw Unsigned32 .1.3.6.1.4.1.9.9.329.1.1.2.1.15 |
cfmFcipLinkExtIPSecIndicates whether the IP Security has been turned on or
off on this link.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.329.1.1.2.1.16 |
cfmFcipLinkExtPhyIfIndexThe physical ifIndex of the interface on which this FCIP link
is currently bound.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.9.9.329.1.1.2.1.17 |
cfmFcipLinkExtWriteAccOperWhen Write Acceleration is operationally off for the FCIP
link, the value of this object will be set to 'false'.
When Write Acceleration is operationally on for the FCIP
link, the value of this object will be set to 'true'.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.329.1.1.2.1.18 |
cfmFcipLinkExtTapeAccOperWhen Tape Acceleration is operationally off for the FCIP
link, the value of this object will be set to 'false'.
When Tape Acceleration is operationally on for the FCIP
link, the value of this object will be set to 'true'.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.329.1.1.2.1.19 |
cfmFcipLinkExtTapeReadAccOperThis object represents the state of the Tape Read
Acceleration for an FCIP link. Tape Read Acceleration
is automatically operational when Tape Acceleration is
operational (cfmFcipLinkExtTapeAccOper) and both sides
of the FCIP link support Tape Read Acceleration.
When Tape Read Acceleration is operationally off for
the FCIP link, the value of this object is 'false'.
When Tape Read Acceleration is operationally on for
the FCIP link, the value of this object is 'true'.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.329.1.1.2.1.20 |
cfmFcipLinkExtFiconTAVsanL2kThe list of VSANs (in the range 1 through 2047)
for which Ficon Tape Acceleration is configured.
Only VSANs with a cficonVsanEntry of CISCO-FICON-MIB
present can be configured for Ficon Tape Acceleration.rw FcList (CISCO-ZS-MIB) .1.3.6.1.4.1.9.9.329.1.1.2.1.21 |
cfmFcipLinkExtFiconTAVsanL4kThe list of VSANs (in the range 2048 through 4096)
for which Ficon Tape Acceleration is configured.
Only VSANs with a cficonVsanEntry of CISCO-FICON-MIB
present can be configured for Ficon Tape Acceleration.rw FcList (CISCO-ZS-MIB) .1.3.6.1.4.1.9.9.329.1.1.2.1.22 |
cfmFcipLinkExtFiconTAVsanLOper2kThe list of VSANs (in the range 1 through 2047)
for which Ficon Tape Acceleration is operationally
ON.ro FcList (CISCO-ZS-MIB) .1.3.6.1.4.1.9.9.329.1.1.2.1.23 |
cfmFcipLinkExtFiconTAVsanLOper4kThe list of VSANs (in the range 2048 through 4096)
for which Ficon Tape Acceleration is operationally
ON.ro FcList (CISCO-ZS-MIB) .1.3.6.1.4.1.9.9.329.1.1.2.1.24 |
cfmFcipLinkMapTableA table containing FCIP link index to
Entity Identifier mapping for a FCIP link. SEQUENCE OF CfmFcipLinkMapEntry .1.3.6.1.4.1.9.9.329.1.1.3 |
cfmFcipLinkMapEntryA conceptual row of the FCIP link map table
mapping the fcip link index to FCIP Entity
Identifier. CfmFcipLinkMapEntry .1.3.6.1.4.1.9.9.329.1.1.3.1 |
cfmFcipLinkMapIndexAn arbitrary integer which uniquely identifies one FCIP link
within a FCIP entity. Unsigned32 .1.3.6.1.4.1.9.9.329.1.1.3.1.1 |
cfmFcipMapEntityIdThe FCIP entity Identifier corresponding to the instance
of cfmFcipLinkMapIndex.ro Unsigned32 .1.3.6.1.4.1.9.9.329.1.1.3.1.2 |
cfmFcipMgmtExtStats OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.329.1.2 |
cfmFcipLinkExtStatsTableA table containing objects which provide status information
of the FCIP link for the cfmFcipLinkExtTable configured
information. SEQUENCE OF CfmFcipLinkExtStatsEntry .1.3.6.1.4.1.9.9.329.1.2.1 |
cfmFcipLinkExtStatsEntryAn entry into cfmFcipLinkExtStatsTable. Each entry
contains attributes associated with an FCIP Link. CfmFcipLinkExtStatsEntry .1.3.6.1.4.1.9.9.329.1.2.1.1 |
cfmFcipLinkStatsRxIPCompRatioThe IP Copmression ratio for received packets on
the FCIP device. The value of this object will be
presented as a floating point number with two digits
after the decimal point.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.329.1.2.1.1.1 |
cfmFcipLinkStatsTxIPCompRatioThe IP Copmression ratio for transmitted packets on
the FCIP device. The value of this object will be
presented as a floating point number with two digits
after the decimal point.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.329.1.2.1.1.2 |
ciscoFcipMgmtExtMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.329.2 |
cfmFcipExtCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.329.2.1 |
cfmFcipExtGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.329.2.2 |