CISCO-FC-MULTICAST-MIB
AI MIB Summary
The CISCO-FC-MULTICAST-MIB enables monitoring and configuration of Fibre Channel multicast groups, membership states, and traffic statistics on Cisco SAN switches. It provides visibility into multicast session parameters and group membership to ensure reliable data replication and storage fabric operations.
MIB module for monitoring and configuring Fibre Channel Multicast feature.
Main OID:
ciscoFcMulticastMIB.1.3.6.1.4.1.9.9.435
13
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
13 total| Object Name |
|---|
ciscoFcMulticastMIBMIB module for monitoring and configuring
Fibre Channel Multicast feature. MODULE-IDENTITY .1.3.6.1.4.1.9.9.435 |
ciscoFcMulticastNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.435.0 |
ciscoFcMulticastMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.435.1 |
cfmConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.435.1.1 |
cfmMulticastRootTableThis table allows the users to configure and monitor the
FC Multicast parameters on all the VSANs configured on the
local switch.
An entry is automatically created in this table if there
is an entry in the fspfTable (defined in CISCO-FSPF-MIB) and
fspfOperStatus (defined in CISCO-FSPF-MIB) for that
entry is 'up'.
An entry is automatically deleted from this table if
either :
a) the fspfOperStatus in the fspfTable entry for the
corresponding VSAN changes to 'down'.
or
b) the fspfTable entry for the corresponding VSAN is
deleted.
Entries in this table can be created via
cfmMulticastRootRowStatus only as the means to specify
non-default parameter values for a VSAN either because the
VSAN is suspended or fspfOperStatus (defined in
CISCO-FSPF-MIB) for that VSAN is 'down' (VSAN state is
indicated by object vsanOperState which is defined in
CISCO-VSAN-MIB).
So an entry in this table exists when one or both of these
conditions holds:
- one or more configuration parameters have non-default
values for a VSAN which is either suspended or the
fspfOperStatus for that VSAN is down.
- the fspfOperStatus for VSAN is 'up'.
This has a number of consequences:
- an entry exists for a suspended VSAN whenever that VSAN
has non-default parameters.
- an entry cannot be created (via cfmMulticastRootRowStatus)
for a VSAN with default parameters; instead, the agent
creates/deletes an entry for a VSAN with default
parameters according to whether the fspfOperStatus is 'up'
or 'down'.
- an entry can not be created via cfmMulticastRootRowStatus
unless non-default parameter values are (simultaneously)
configured for a VSAN whose fspfOperStatus is 'down'.
- deleting an entry via cfmMulticastRootRowStatus when either
the VSAN is suspended and configured with non-default
values or the VSAN is active, is equivalent to resetting
its parameters to their default values.
If an entry is configured with default-values and the
VSAN is in suspended state, then the entry would be
deleted. SEQUENCE OF CfmMulticastRootEntry .1.3.6.1.4.1.9.9.435.1.1.1 |
cfmMulticastRootEntryThis entry contains the multicase parameters on this VSAN. CfmMulticastRootEntry .1.3.6.1.4.1.9.9.435.1.1.1.1 |
cfmMulticastRootConfigModeThe configured multicast root mode on this VSAN.rw CfmMulticastRootMode .1.3.6.1.4.1.9.9.435.1.1.1.1.1 |
cfmMulticastRootOperModeThe operational multicast root mode on this VSAN.ro CfmMulticastRootMode .1.3.6.1.4.1.9.9.435.1.1.1.1.2 |
cfmMulticastRootDomainIdThe domainID of the multicast root on this VSAN.ro DomainIdOrZero (CISCO-ST-TC) .1.3.6.1.4.1.9.9.435.1.1.1.1.3 |
cfmMulticastRootRowStatusThe status of conceptual row on this VSAN.
This object can be used to create an entry only if
either the corresponding VSAN is suspended or the
fspfOperStatus is down. If the VSAN is either
not-existent or fspfOperStatus is up, the create will fail.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.435.1.1.1.1.4 |
ciscoFcMulticaseConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.435.2 |
ciscoFcMulticastMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.435.2.1 |
ciscoFcMulticastMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.435.2.2 |