CISCO-ETHERNET-ACCESS-MIB
AI MIB Summary
The CISCO-ETHERNET-ACCESS-MIB provides SNMP management objects for Cisco edge devices in Metro Ethernet and DSL environments to monitor UNI, NNI, and ENI port states, traffic statistics, and subscriber session mappings. It enables administrators to track physical interface metrics, module or chassis status, and the mapping of subscriber traffic between customer equipment and the service provider network.
The tables defined by this MIB module contain a collection of managed objects that are general in nature and apply to an edge device in an organizations network, e.g. a Metro Ethernet network. An edge device, is a customer located equipment, this is the first device which will connect the Service Provider's network and map subscriber traffic into the next layer. The access media could be either CAT5 or fiber. The access device (edge device) can be designed for DSL, Ethernet or other technologies, however, this MIB is designed for Ethernet.
Terminology:
UNI - User to Network Interface NNI - Network to Network Interface. ENI - Enhanced Network Interface. Enhanced UNI port. module/device
- In an environment (specifically, in an SNMP context)
consisting of a single chassis which can contain multiple cards, the term 'module' refers to a card and the term 'device' refers to the whole chassis. In an environment where multiple chassis are 'stacked' together, the term 'module' refers to a chassis and the term 'device' refers to the whole stack. In an environment containing only a single chassis without removable cards, the terms 'device' and 'module' both refer to the chassis and its contents.
Main OID:
ciscoEthernetAccessMIB.1.3.6.1.4.1.9.9.466
16
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
16 total| Object Name |
|---|
ciscoEthernetAccessMIBThe tables defined by this MIB module contain a collection
of managed objects that are general in nature and apply to
an edge device in an organizations network, e.g. a Metro
Ethernet network. An edge device, is a customer located
equipment, this is the first device which will connect the
Service Provider's network and map subscriber traffic into
the next layer. The access media could be either CAT5 or
fiber. The access device (edge device) can be designed for
DSL, Ethernet or other technologies, however, this MIB is
designed for Ethernet.
Terminology:
UNI - User to Network Interface
NNI - Network to Network Interface.
ENI - Enhanced Network Interface. Enhanced UNI port.
module/device
- In an environment (specifically, in an SNMP context)
consisting of a single chassis which can contain
multiple cards, the term 'module' refers to a card
and the term 'device' refers to the whole chassis.
In an environment where multiple chassis are 'stacked'
together, the term 'module' refers to a chassis and
the term 'device' refers to the whole stack.
In an environment containing only a single chassis
without removable cards, the terms 'device' and
'module' both refer to the chassis and its contents. MODULE-IDENTITY .1.3.6.1.4.1.9.9.466 |
ciscoEthernetAccessMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.466.1 |
ceaGlobals OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.466.1.1 |
ceaMaxNNIPortsThe max number of interfaces per module for which the
ceaPortType can have the value 'nni'.
The value of 0 is returned by this object if there is no
limitation to the number of NNI ports.ro Integer32 .1.3.6.1.4.1.9.9.466.1.1.1 |
ceaMaxUNIVlanCommunityPortsThe maximum number of ports on this device for which
the ceaUNIVlanType object can have the value 'community'.
The value of 0 is returned by this object if there is no
limitation to the number of UNI VLAN Communities.ro Integer32 .1.3.6.1.4.1.9.9.466.1.1.2 |
ceaConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.466.1.2 |
ceaPortTableThis table contains Ethernet port specific information.
There exists an entry for each Ethernet port with an ifType
of 6 (ethernetCsmacd) in this table.
Note that the maximum number of NNI ports that can be
configured per module on this device is given by the value
of ceaMaxNNIPorts. SEQUENCE OF CeaPortEntry .1.3.6.1.4.1.9.9.466.1.2.1 |
ceaPortEntryA set of Ethernet port specific parameters for a device
which can be configured with a mixture of port types
defined by the ceaPortType object. CeaPortEntry .1.3.6.1.4.1.9.9.466.1.2.1.1 |
ceaPortTypeThe current configuration of the port. Only ports that are
supported by the ceaPortCapability object can be set.
Unspecified port type is any other port type than NNI,
UNI or ENI.
unspecified = Not UNI, or NNI, or ENI
uni = User to Network Interface port type.
nni = Network to Network Interface port type.
eni = Enhanced UNI port type.rw Enumeration .1.3.6.1.4.1.9.9.466.1.2.1.1.1 |
ceaPortCapabilityTypes supported by the Ethernet port. If a port doesn't
support the port type the ceaPortType will not allow
set of the unsupported type.
nni = Port supports NNI.
uni = Port supports UNI.
eni = Port supports ENI.ro Bits .1.3.6.1.4.1.9.9.466.1.2.1.1.2 |
ceaUNIVlanTableThis table contains UNI VLAN information for all the VLANs
which currently exist on this device.
The number of UNI ports that can belong to a VLAN type
'community' is limited by the ceaMaxUNIVlanCommunityPorts
object. SEQUENCE OF CeaUNIVlanEntry .1.3.6.1.4.1.9.9.466.1.2.2 |
ceaUNIVlanEntryThere is an entry in this table for each VLAN that
exist on this device. CeaUNIVlanEntry .1.3.6.1.4.1.9.9.466.1.2.2.1 |
ceaUNIVlanTypeIndicates the VLAN type defined for the UNI VLAN.rw CeaVlanUNIType .1.3.6.1.4.1.9.9.466.1.2.2.1.1 |
ciscoEthernetAccessMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.466.2 |
cEthernetAccessMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.466.2.1 |
cEthernetAccessMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.466.2.2 |