CISCO-ERM-MIB
The CISCO-ERM-MIB enables the configuration and monitoring of CPU, memory, and buffer resource policies on Cisco IOS devices through a framework that defines resource owners, users, and groups. It facilitates the enforcement of global and local threshold limits to trigger notifications upon resource depletion or monopolization, allowing the system to gracefully manage finite resources and prevent service degradation.
Imported Objects
Objects
143 total| Object Name |
|---|
ciscoErmMIB MODULE-IDENTITY .1.3.6.1.4.1.9.9.510 |
ciscoErmMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.510.0 |
ciscoErmGlobalPolicyViolation NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.510.0.1 |
ciscoErmLocalPolicyViolation NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.510.0.2 |
ciscoErmMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.510.1 |
cermScalars OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.510.1.1 |
cermScalarsGlobalPolicyNamerw SnmpAdminString .1.3.6.1.4.1.9.9.510.1.1.1 |
cermStats OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.510.1.2 |
cermResOwnerTable SEQUENCE OF CermResOwnerEntry .1.3.6.1.4.1.9.9.510.1.2.1 |
cermResOwnerEntry CermResOwnerEntry .1.3.6.1.4.1.9.9.510.1.2.1.1 |
cermResOwnerSubEntityId CermSubEntityId .1.3.6.1.4.1.9.9.510.1.2.1.1.1 |
cermResOwnerId CermOwnerId .1.3.6.1.4.1.9.9.510.1.2.1.1.2 |
cermResOwnerNamero SnmpAdminString .1.3.6.1.4.1.9.9.510.1.2.1.1.3 |
cermResOwnerMeasurementUnitro SnmpAdminString .1.3.6.1.4.1.9.9.510.1.2.1.1.4 |
cermResOwnerThreshIsConfigurablero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.510.1.2.1.1.5 |
cermResOwnerResUserCountro Unsigned32 .1.3.6.1.4.1.9.9.510.1.2.1.1.6 |
cermResOwnerResGroupCountro Unsigned32 .1.3.6.1.4.1.9.9.510.1.2.1.1.7 |
cermResOwnerSubTypeTable SEQUENCE OF CermResOwnerSubTypeEntry .1.3.6.1.4.1.9.9.510.1.2.2 |
cermResOwnerSubTypeEntry CermResOwnerSubTypeEntry .1.3.6.1.4.1.9.9.510.1.2.2.1 |
cermResOwnerSubTypeId Unsigned32 .1.3.6.1.4.1.9.9.510.1.2.2.1.1 |
cermResOwnerSubTypeNamero SnmpAdminString .1.3.6.1.4.1.9.9.510.1.2.2.1.2 |
cermResOwnerSubTypeUsagePctro CermResUsagePct UNITS "percentage" .1.3.6.1.4.1.9.9.510.1.2.2.1.3 |
cermResOwnerSubTypeUsagero Unsigned32 .1.3.6.1.4.1.9.9.510.1.2.2.1.4 |
cermResOwnerSubTypeMaxUsagero Unsigned32 .1.3.6.1.4.1.9.9.510.1.2.2.1.5 |
cermResOwnerSubTypeGlobNotifSeverityro CermNotificationSeverity .1.3.6.1.4.1.9.9.510.1.2.2.1.6 |
cermResOwnerSubTypeThresholdTable SEQUENCE OF CermResOwnerSubTypeThresholdEntry .1.3.6.1.4.1.9.9.510.1.2.3 |
cermResOwnerSubTypeThresholdEntry CermResOwnerSubTypeThresholdEntry .1.3.6.1.4.1.9.9.510.1.2.3.1 |
cermResOwnerSubTypeThreshSeverity CermThresholdSeverity .1.3.6.1.4.1.9.9.510.1.2.3.1.1 |
cermResOwnerSubTypeRisingThreshro CermThreshold .1.3.6.1.4.1.9.9.510.1.2.3.1.2 |
cermResOwnerSubTypeRisingIntervalro CermDampenInterval UNITS "seconds" .1.3.6.1.4.1.9.9.510.1.2.3.1.3 |
cermResOwnerSubTypeFallingThreshro CermThreshold .1.3.6.1.4.1.9.9.510.1.2.3.1.4 |
cermResOwnerSubTypeFallingIntervalro CermDampenInterval UNITS "seconds" .1.3.6.1.4.1.9.9.510.1.2.3.1.5 |
cermResUserTypeTable SEQUENCE OF CermResUserTypeEntry .1.3.6.1.4.1.9.9.510.1.2.4 |
cermResUserTypeEntry CermResUserTypeEntry .1.3.6.1.4.1.9.9.510.1.2.4.1 |
cermResUserTypeSubEntityId CermSubEntityId .1.3.6.1.4.1.9.9.510.1.2.4.1.1 |
cermResUserTypeId CermUserTypeId .1.3.6.1.4.1.9.9.510.1.2.4.1.2 |
cermResUserTypeNamero SnmpAdminString .1.3.6.1.4.1.9.9.510.1.2.4.1.3 |
cermResUserTypeResOwnerCountro Unsigned32 .1.3.6.1.4.1.9.9.510.1.2.4.1.4 |
cermResUserTypeResUserCountro Unsigned32 .1.3.6.1.4.1.9.9.510.1.2.4.1.5 |
cermResUserTypeResGroupCountro Unsigned32 .1.3.6.1.4.1.9.9.510.1.2.4.1.6 |
cermResUserTable SEQUENCE OF CermResUserEntry .1.3.6.1.4.1.9.9.510.1.2.5 |
cermResUserEntry CermResUserEntry .1.3.6.1.4.1.9.9.510.1.2.5.1 |
cermResUserId CermUserId .1.3.6.1.4.1.9.9.510.1.2.5.1.1 |
cermResUserNamero SnmpAdminString .1.3.6.1.4.1.9.9.510.1.2.5.1.2 |
cermResUserPriorityro Unsigned32 .1.3.6.1.4.1.9.9.510.1.2.5.1.3 |
cermResUserResGroupIdro CermGroupId .1.3.6.1.4.1.9.9.510.1.2.5.1.4 |
cermResGroupTable SEQUENCE OF CermResGroupEntry .1.3.6.1.4.1.9.9.510.1.2.6 |
cermResGroupEntry CermResGroupEntry .1.3.6.1.4.1.9.9.510.1.2.6.1 |
cermResGroupId CermGroupId .1.3.6.1.4.1.9.9.510.1.2.6.1.1 |
cermResGroupNamero SnmpAdminString .1.3.6.1.4.1.9.9.510.1.2.6.1.2 |
cermResGroupUserInstanceCountro Unsigned32 .1.3.6.1.4.1.9.9.510.1.2.6.1.3 |
cermResGroupResUserTable SEQUENCE OF CermResGroupResUserEntry .1.3.6.1.4.1.9.9.510.1.2.7 |
cermResGroupResUserEntry CermResGroupResUserEntry .1.3.6.1.4.1.9.9.510.1.2.7.1 |
cermResGroupResUserIdro CermUserId .1.3.6.1.4.1.9.9.510.1.2.7.1.1 |
cermResOwnerResUserOrGroupTable SEQUENCE OF CermResOwnerResUserOrGroupEntry .1.3.6.1.4.1.9.9.510.1.2.8 |
cermResOwnerResUserOrGroupEntry CermResOwnerResUserOrGroupEntry .1.3.6.1.4.1.9.9.510.1.2.8.1 |
cermResOwnerResUserTypeId CermUserTypeId .1.3.6.1.4.1.9.9.510.1.2.8.1.1 |
cermResOwnerResUserOrGroupId CermUserId .1.3.6.1.4.1.9.9.510.1.2.8.1.2 |
cermResUserOrGroupFlagro CermUserOrGroup .1.3.6.1.4.1.9.9.510.1.2.8.1.3 |
cermResUserOrGroupUsagePctro CermResUsagePct UNITS "percentage" .1.3.6.1.4.1.9.9.510.1.2.8.1.4 |
cermResUserOrGroupUsagero Unsigned32 .1.3.6.1.4.1.9.9.510.1.2.8.1.5 |
cermResUserOrGroupMaxUsagero Unsigned32 .1.3.6.1.4.1.9.9.510.1.2.8.1.6 |
cermResUserOrGroupNotifSeverityro CermNotificationSeverity .1.3.6.1.4.1.9.9.510.1.2.8.1.7 |
cermResUserOrGroupGlobNotifSeverityro CermNotificationSeverity .1.3.6.1.4.1.9.9.510.1.2.8.1.8 |
cermResOwnerResUserOrGroupThresholdTable SEQUENCE OF CermResOwnerResUserOrGroupThresholdEntry .1.3.6.1.4.1.9.9.510.1.2.9 |
cermResOwnerResUserOrGroupThresholdEntry CermResOwnerResUserOrGroupThresholdEntry .1.3.6.1.4.1.9.9.510.1.2.9.1 |
cermResUserOrGroupThreshIsUserGlob TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.510.1.2.9.1.1 |
cermResUserOrGroupThreshSeverity CermThresholdSeverity .1.3.6.1.4.1.9.9.510.1.2.9.1.2 |
cermResUserOrGroupThreshFlagro CermUserOrGroup .1.3.6.1.4.1.9.9.510.1.2.9.1.3 |
cermResUserOrGroupRisingThreshro CermThreshold .1.3.6.1.4.1.9.9.510.1.2.9.1.4 |
cermResUserOrGroupRisingIntervalro CermDampenInterval UNITS "seconds" .1.3.6.1.4.1.9.9.510.1.2.9.1.5 |
cermResUserOrGroupFallingThreshro CermThreshold .1.3.6.1.4.1.9.9.510.1.2.9.1.6 |
cermResUserOrGroupFallingIntervalro CermDampenInterval UNITS "seconds" .1.3.6.1.4.1.9.9.510.1.2.9.1.7 |
cermResUserTypeResOwnerTable SEQUENCE OF CermResUserTypeResOwnerEntry .1.3.6.1.4.1.9.9.510.1.2.10 |
cermResUserTypeResOwnerEntry CermResUserTypeResOwnerEntry .1.3.6.1.4.1.9.9.510.1.2.10.1 |
cermResUserTypeResOwnerIdro CermOwnerId .1.3.6.1.4.1.9.9.510.1.2.10.1.1 |
cermResMonitorTable SEQUENCE OF CermResMonitorEntry .1.3.6.1.4.1.9.9.510.1.2.11 |
cermResMonitorEntry CermResMonitorEntry .1.3.6.1.4.1.9.9.510.1.2.11.1 |
cermResMonitorSubEntityId CermSubEntityId .1.3.6.1.4.1.9.9.510.1.2.11.1.1 |
cermResMonitorId CermMonitorId .1.3.6.1.4.1.9.9.510.1.2.11.1.2 |
cermResMonitorNamero SnmpAdminString .1.3.6.1.4.1.9.9.510.1.2.11.1.3 |
cermResMonitorResOwnerResUserTable SEQUENCE OF CermResMonitorResOwnerResUserEntry .1.3.6.1.4.1.9.9.510.1.2.12 |
cermResMonitorResOwnerResUserEntry CermResMonitorResOwnerResUserEntry .1.3.6.1.4.1.9.9.510.1.2.12.1 |
cermResMonitorResOwnerId CermOwnerIdOrZero .1.3.6.1.4.1.9.9.510.1.2.12.1.1 |
cermResMonitorResUserTypeId CermUserTypeIdOrZero .1.3.6.1.4.1.9.9.510.1.2.12.1.2 |
cermResMonitorResUserId CermUserIdOrZero .1.3.6.1.4.1.9.9.510.1.2.12.1.3 |
cermResMonitorResPolicyNamero SnmpAdminString .1.3.6.1.4.1.9.9.510.1.2.12.1.4 |
cermResMonitorPolicyTable SEQUENCE OF CermResMonitorPolicyEntry .1.3.6.1.4.1.9.9.510.1.2.13 |
cermResMonitorPolicyEntry CermResMonitorPolicyEntry .1.3.6.1.4.1.9.9.510.1.2.13.1 |
cermResMonitorPolicyNamero SnmpAdminString .1.3.6.1.4.1.9.9.510.1.2.13.1.1 |
cermConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.510.1.3 |
cermConfigPolicyTable SEQUENCE OF CermConfigPolicyEntry .1.3.6.1.4.1.9.9.510.1.3.1 |
cermConfigPolicyEntry CermConfigPolicyEntry .1.3.6.1.4.1.9.9.510.1.3.1.1 |
cermPolicyName SnmpAdminString .1.3.6.1.4.1.9.9.510.1.3.1.1.1 |
cermPolicyIsGlobalrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.510.1.3.1.1.2 |
cermPolicyUserTypeNamerw SnmpAdminString .1.3.6.1.4.1.9.9.510.1.3.1.1.3 |
cermPolicyLoggingEnabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.510.1.3.1.1.4 |
cermPolicySnmpNotifEnabledrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.510.1.3.1.1.5 |
cermPolicyStorageTyperw StorageType (SNMPv2-TC) .1.3.6.1.4.1.9.9.510.1.3.1.1.6 |
cermPolicyRowStatusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.510.1.3.1.1.7 |
CISCO-ERM-MIB Technical Reference Overview
The CISCO-ERM-MIB SNMP MIB module published by Cisco defines 143 managed OID objects, including 94 scalar/column metrics, 18 SNMP tables, and 2 trap/notification events anchored at base OID .1.3.6.1.4.1.9.9.510. Key tabular structures include cermResOwnerTable, cermResOwnerSubTypeTable, cermResOwnerSubTypeThresholdTable, cermResUserTypeTable, cermResUserTable, cermResGroupTable. Monitored SNMP traps/notifications include ciscoErmGlobalPolicyViolation, ciscoErmLocalPolicyViolation.
Key OID Definitions in CISCO-ERM-MIB
.1.3.6.1.4.1.9.9.510Cisco Embedded Resource Manager (ERM) MIB. The Embedded Resource Manager (ERM) is a framework which helps in effectively managing resources such as cpu, memory, buffers, etc. There are two important scenarios where the ERM framework would be useful: 1. Resource Depletion - how to gracefully handle a situation where the system runs out of a finite resource. 2. Resource Separation - how to share resources fairly between different entities in the system such that activity of one entity does not adversely affect others. The ERM framework has the following entities: 1. Resource Owner Resource Owner (RO) provides resources to one or more resource users. Example: cpu, memory and buffer. The resource owner doesn't mean the physical resource. For example, 'memory' resource owner would actually mean the memory manager rather than the physical memory. 2. Resource User Type Resource User Type (RUT) is a template which defines a set of resource owners from where resources can be obtained by any of the resource users instantiated from the resource user type. 3. Resource User Resource User (RU) is a logical entity or application that consumes one or more resources. Resource users are instantiated from the Resource User Type. Resource user can also be called as 'instance of a resource user type'. A resource user registers with a resource user type and thus it is indirectly registered with all resource owners defined by the resource user type. 4. Resource User Group Resource User Group (RG) is a logical entity which contains group of resource users. It would hence forth be referred as Resource Group. In some cases (for example, multiple users with same name), user may want to set threshold value for sum of resource utilized by a group of resource users. In such case, those resource users can be grouped/added under a resource group. Then, user can apply a resource policy to the resource group. 5. Resource Usage Monitor This is also called as Resource Monitor (RM). The resource monitor is a logical entity or application that monitors resource owner, resource user, resource policy and resource owner <-> resource user relationship. When any applied resource policy is violated, all resource monitors monitoring the resource policy will be notified and the resource monitor can take appropriate action based on the resource owner and resource user attributes. The ERM framework allows three types of thresholding: 1) System Global Thresholding When total utilization of a resource exceeds the applied global rising threshold value, all resource users which consume resources from the concerned resource owner are notified to take appropriate action. The notification order is determined by priority of the resource users. Resource users with a lower priority are notified first, so as to enable lower priority resource users to reduce its resource consumption prior to any higher priority resource users. This order prevents higher priority resource users to start freeing up their resource, thereby not affecting their performance. 2) User Local Thresholding When utilization of a resource by a specific resource user exceeds the applied user local rising threshold value, a notification is sent *only* to the concerned resource user. The user local thresholding method can be used to prevent a resource user from monopolizing any available resources. 3) Per User Global Thresholding When total utilization of a resource exceeds the applied per user global rising threshold value, a notification is sent *only* to the concerned resource user. Each resource user can have its own per user global threshold value (per resource owner). Per User Global Thresholding is similar to System Global Thresholding, except that notification for Per User Global Threshold violation is sent only to the corresponding resource user. The main purpose of the Per User Global Thresholding is that a resource user can take preventive actions based on the global resource utilization of a resource. The Embedded Resource Manager (ERM) framework allows applying and monitoring threshold limit for usage of resources such as cpu, memory, buffer, etc. Exceeding any applied rising threshold value will trigger an 'up' notification to relevant resource user(s) and resource monitor(s) based on the type of violated resource policy. After the 'up' notification, if the utilization goes below the falling threshold value, a 'down' notification will be sent to the resource user(s) and resource monitor(s). The 'up' and 'down' notifications do not mean the SNMP notifications/traps. Rising threshold value and falling threshold value should be different to avoid flapping. The ERM framework enables configuration of resource policy in which rising/falling threshold values for a set of resource owners can be specified. There are two types of resource policies which can be configured. 1) Global Resource Policy There can be only one global resource policy applied in the system at any point of time, though multiple global resource policies can be configured. On violation of a applied global resource policy, all resource users (which consume resources from the concerned resource owner) and resource monitors (which watch the concerned resource owner) will be notified to take appropriate action. 2) Local Resource Policy The local resource policy is configured for a specific resource user type. This policy can be applied for a resource user (or group) of the same resource user type. A local resource policy can be applied for more than one resource users (or groups). Both user local thresholding and per user global thresholding can be configured under a local resource policy. On violation of any local resource policy, only those resource users on which the violated resource policy was applied, will be notified in order to take appropriate action. Whenever a resource is consumed, current utilization of the resource will be compared against the applied rising threshold value. The ERM framework provides a mechanism to send notifications to resource user(s) and resource monitor(s) whenever resource utilization exceeds any applied rising threshold value or falls below any applied falling threshold value. In such situations, the resource user(s) can take appropriate corrective action (for example, limiting or avoiding resource consumption). Thus, the ERM framework helps in preventing catastrophic system failures caused by high levels of resource depletion. The ERM framework can be extended to all kinds of resources (for example, incoming control plane packets) that need to be managed. The ERM MIB module facilitates the following operations: 1. Getting information about all the above mentioned ERM entities available in a managed system. 2. Creating/modifying/removing a resource policy. 3. Creating/modifying/removing a threshold configuration for a particular resource policy. 4. Creating/removing a resource group. 5. Adding/removing a resource user to/from a particular resource group. 6. Applying global resource policy. 7. Applying local resource policy for a resource user or resource group.
.1.3.6.1.4.1.9.9.510.1.2.1This table contains information about each resource owner in the system. Each resource owner maintains a list of resource users and performs the following: a) Accounting and Thresholding Accounting and thresholding involves accounting of resources allocated to each resource user and using threshold limits for notifying resource user(s) and resource usage monitor(s) about violations. Accounting is done by each resource owner. The ERM framework allows user to configure thresholding values for each resource owner. When resource utilization of a resource owner exceeds an applied threshold value, the resource owner will send notification to relevant resource user(s). b) Notifications Sent and Actions Taken In case of system global thresholding, whenever total resource utilization of a resource owner exceeds an applied rising threshold value, the resource owner will send an 'up' notification to the ERM framework. Whenever total resource utilization of the same resource owner falls below the corresponding falling threshold value (after crossing the rising threshold value), the resource owner will sent a 'down' notification to the ERM framework. On receiving the 'up' notification, resource user(s) is(are) expected to take appropriate action by freeing the resource or limiting the resource consumption. The resource owner may restrain from allocating resource to the resource user(s) in case of the resource user(s) not taking any action.
.1.3.6.1.4.1.9.9.510.1.2.2This table contains information about each sub-type for each resource owner in the cermResOwnerTable. For example, lets consider that the 'memory' resource owner has two sub-types called 'processor' and 'io' in the system. Then, two entries (one is for 'processor' memory and another one is for 'io' memory) will be present in this table for the 'memory' resource owner. If a resource owner does not have any sub-types, then this table will have an entry with the zero value for the cermResOwnerSubTypeId and zero-length string value for the cermResOwnerSubTypeName, for the corresponding resource owner.
.1.3.6.1.4.1.9.9.510.1.2.3This table contains information about each applied global threshold configuration for each resource owner sub-type in the system.
.1.3.6.1.4.1.9.9.510.1.2.4This table contains information about each resource user type in the system. This table will have one entry for each resource user type in the system.
.1.3.6.1.4.1.9.9.510.1.2.5A table which contains information about each resource user in the system. This table will have one entry for each resource user in the system.
.1.3.6.1.4.1.9.9.510.1.2.6This table contains information about each resource group in the system. This table will have one entry for each resource group in the system.
.1.3.6.1.4.1.9.9.510.1.2.7This table has list of resource users present in each resource group.
.1.3.6.1.4.1.9.9.510.1.2.8This table contains information about each resource owner sub-type and resource user/group relationship.
.1.3.6.1.4.1.9.9.510.1.2.9This table contains information about each applied threshold configuration for each resource owner sub-type <-> resource user/group relationship. This table will have an entry for each threshold configuration for each resource owner sub-type <-> resource user/group relationship for which a rising threshold value is set. If rising threshold value is not set for a resource owner sub-type <-> resource user/group relationship, then an entry will not be present in this table for the relationship.
.1.3.6.1.4.1.9.9.510.1.2.10This table contains an entry for each resource user type and resource owner relationship in the system. This table would be useful in getting list of resource owners in a particular resource user type and vice versa.
.1.3.6.1.4.1.9.9.510.1.2.11This table contains information about each resource monitor in the system.
.1.3.6.1.4.1.9.9.510.1.2.12This table contains the following information: 1) resource owners being watched by each resource monitor. 2) resource users being watched by each resource monitor. 3) resource owner and resource user relationships being watched by each resource monitor.
.1.3.6.1.4.1.9.9.510.1.2.13This table contains an entry for each resource policy being watched by each resource monitor in the system. This table will be useful to get the name of all the resource policies being watched by a particular resource monitor. If a resource monitor doesn't watch any resource policy, then this table will not have any entry for the resource monitor.
.1.3.6.1.4.1.9.9.510.1.3.1This table contains information about each resource policy configured in the system. Resource Policy will contain threshold configurations for a set of resource owners. Each threshold configuration must specify the threshold severity and the rising threshold value which are mandatory. The rising interval time, falling threshold value and falling interval time are optional for the threshold configuration. Only one local resource policy can be applied for a resource user or resource group, at any point in time. The global resource policy cannot be applied for a resource user or resource group. Whenever a resource policy is applied to a resource user instance, each threshold configuration in the resource policy will be applied to all relevant resource owner and resource user relationships.
.1.3.6.1.4.1.9.9.510.1.3.2This table contains information about each threshold configuration in each resource policy in the cermConfigPolicyTable. This table can be used to configure threshold details (i.e. threshold severity, rising threshold value, falling threshold value, rising interval time and falling interval time) for a resource policy in the cermConfigPolicyTable.
.1.3.6.1.4.1.9.9.510.1.3.3This table contains information about each resource group created by the user in the system. This table is used to create or delete a resource group in the system.
.1.3.6.1.4.1.9.9.510.1.3.4This table has list of resource user instances added into each resource group.
.1.3.6.1.4.1.9.9.510.1.3.5This table has a list of resource users (or groups) for which local resource policies are applied in the system. The main purpose of this table is to apply a local resource policy for a resource user or resource group.
.1.3.6.1.4.1.9.9.510.0.1This notification event will be generated whenever system global resource policy is violated i.e. total resource utilization exceeds the applied global threshold limit for any resource owner sub-type. Also, this notificatioin will be generated when resource utilization of the affected resource owner sub-type falls below the corresponding falling threshold value. The cermResOwnerName and cermResOwnerSubTypeName objects indicates the resource owner name and resource owner sub-type name for which an applied global threshold value got violated. The cermNotifsThresholdSeverity object indicates the configured threshold severity which got violated. This object contains value of the cermResOwnerSubTypeThreshSeverity corresponding to the global threshold configuration which got violated. The cermNotifsThresholdValue object indicates the configured threshold limit which got violated. This object contains value of either cermResOwnerSubTypeRisingThresh or cermResOwnerSubTypeFallingThresh based on the ERM notification direction indicated by the object cermNotifsDirection. If the cermNotifsDirection object value is 'up', the cermNotifsThresholdValue object would contain the value of the object cermResOwnerSubTypeRisingThresh. If the cermNotifsDirection object value is 'down', the cermNotifsThresholdValue object would contain the value of the object cermResOwnerSubTypeFallingThresh. The cermNotifsDirection object indicates whether it is an 'up' notification or a 'down' notification. The cermNotifsPolicyName object indicates name of the global resource policy which got violated. This object contains value of the cermPolicyName for the violated resource policy, in the cermConfigPolicyTable. If there is no associated resource policy name for the notification, then this object will contain zero-length string.
.1.3.6.1.4.1.9.9.510.0.2This notification event will be generated whenever a local resource policy is violated i.e. resource utilization exceeds the applied user local or per user global threshold limit for any resource owner sub-type <-> resource user relationship. The cermResOwnerName and cermResOwnerSubTypeName objects indicates the resource owner name and resource owner sub-type name for which an applied per user global or user local threshold value got violated. The cermResUserOrGroupThreshFlag object indicates whether the ERM notification is because of *resource user* threshold violation or *resource group* threshold violation. The cermNotifsThresholdIsUserGlob object indicates whether the notification belongs to Per User Global threshold violation or User Local threshold violation. This object contains the value of cermResUserOrGroupThreshIsUserGlob corresponding to the threshold configuration which got violated. The cermNotifsThresholdValue object indicates the configured threshold limit which got violated. This object contains value of either cermResUserOrGroupRisingThresh or cermResUserOrGroupFallingThresh based on the ERM notification direction indicated by the object cermNotifsDirection. For the 'up' notification, this object would contain value of the object cermResUserOrGroupRisingThresh. For the 'down' notification, it would contain value of the object cermResUserOrGroupFallingThresh. The cermNotifsThresholdSeverity object indicates the configured threshold severity which got violated. This object contains value of the object cermResUserOrGroupThreshSeverity corresponding to the resource owner sub-type and resource user relationship. The cermNotifsDirection object indicates whether it is an 'up' notification or a 'down' notification. The cermNotifsPolicyName object indicates name of the local resource policy which got violated. If there is no associated policy name for the notification, then this object will contain zero-length string.
.1.3.6.1.4.1.9.9.510.1.1.1This is a textual string containing name of the global resource policy applied in the system. If global resource policy is not applied in the system, then this scalar object will contain zero-length string. A global resource policy can be applied to the system by setting this scalar object to any global resource policy name (i.e. cermPolicyName) present in the cermConfigPolicyTable. Setting this object to zero-length string, will undo any applied global resource policy in the system.
.1.3.6.1.4.1.9.9.510.1.5.1This object indicates whether generation of traps for ERM policy violation notifications are allowed or not. When this object is set to 'true', it allows generation of traps for the ERM policy violation related notifications ciscoErmGlobalPolicyViolation and ciscoErmLocalPolicyViolation.
.1.3.6.1.4.1.9.9.510.1.4.1This object indicates the severity of the threshold configuration.
More MIBs from Cisco
Browse all CiscoMIBs →The CISCO-UNIFIED-COMPUTING-COMPUTE-MIB provides SNMP-based monitoring and management of Cisco UCS compute blades, servers, and chassis components, exposing critical metrics such as CPU utilization, memory usage, thermal sensor readings, power supply status, and interface operational states. This module enables granular visibility into the health and performance of the Cisco Unified Computing System's compute subsystems for capacity planning and fault isolation.
The CISCO-UNIFIED-COMPUTING-STORAGE-MIB facilitates SNMP-based monitoring and management of storage subsystems, including Fibre Channel and iSCSI interfaces, within the Cisco Unified Computing System (UCS) fabric interconnects and blade servers. It exposes critical operational metrics such as port status, error counters, throughput statistics, and storage controller health states to enable granular visibility into the storage infrastructure.
The CISCO-UNIFIED-COMPUTING-VNIC-MIB enables SNMP-based monitoring and management of Virtual Network Interface Card (vNIC) attributes, including operational status, traffic counters, and binding configurations, within the Cisco Unified Computing System (UCS) fabric interconnects and server blades.
SNMP MIB module
The CISCO-UNIFIED-COMPUTING-BIOS-MIB enables SNMP-based monitoring and configuration of BIOS-level parameters, firmware versions, and hardware initialization states within Cisco Unified Computing System (UCS) servers. It provides visibility into critical server boot diagnostics, BIOS settings, and hardware readiness indicators to facilitate low-level infrastructure management and troubleshooting.
The CISCO-UNIFIED-COMPUTING-ETHER-MIB provides SNMP management interfaces for monitoring Ethernet interface statistics, link states, and error counters on Cisco Unified Computing System (UCS) fabric interconnects and blade server line cards. This module enables the tracking of physical layer connectivity, port throughput, and packet error rates within the UCS Ethernet switching infrastructure.