CISCO-ENTITY-DIAG-MIB
AI MIB Summary
The CISCO-ENTITY-DIAG-MIB enables the monitoring and execution of non-disruptive online diagnostic suites, scheduled health checks, and on-demand tests across Cisco physical entities such as chassis, line cards, power supplies, and ports. It provides granular visibility into the functional integrity of these components by exposing diagnostic job statuses, test results, and the specific diagnostic levels supported for each managed object within the ENTITY-MIB framework.
This MIB module defines the managed objects that describe the online diagnostics capabilities supported by the physical entities contained by the system, including chassis, modules, ports, power supplies, fans, and sensors. In order to manage the online diagnostic capabilities supported by a physical entity, it must be represented by a conceptual row in the entPhysicalTable of the ENTITY-MIB (RFC-2737).
GLOSSARY
Boot-up Diagnostic - a diagnostic consisting of tests intended to be executed in a reasonable timeframe when a physical entity boots.
Diagnostic - a suite of tests intended to exercise the functional integrity of a physical entity.
Diagnostic Level - the degree of completeness that a diagnostic will exercise a physical entity.
Field Diagnostic - a special suite of tests intended to exercise the functional integrity of a physical entity in a manner that is possible when a physical entity is operational or running an operational image.
Field Diagnostic Image - an image supporting field diagnostics. A physical entity has to be loaded with a field diagnostic image before field diagnostics can be executed on the physical entity.
Health Monitoring - the process of running special non-intrusive online tests periodically on a physical entity for the purpose of tracking the overall condition of a physical entity.
On-Demand Diagnostic - a diagnostic intended to be executed immediately upon request.
Offline Diagnostic - a diagnostic that consists of tests that are disruptive in nature, and thus requires the physical entity being evaluated to be taken offline for the duration.
Online Diagnostic - a diagnostic that consists of tests that are not disruptive in nature, and thus can be done without taking the physical entity offline.
Physical Entity - an identifiable physical resource, such as a chassis, line card, power supply, or communication port. See RFC-2737, 'Entity MIB (Version 2)', K. McCloghrie and A. Bierman.
Scheduled Diagnostic - a diagnostic intended to execute at some time in the future. There exist two types of scheduled
diagnostics: 1) one-shot, which execute only once; and 2)
periodic, which executes at a specific interval.
Test - an exercise intended to determine the functional integrity of a component comprising a physical entity (e.g., a port might support an internal loopback test).
Diagnostic Job - Consists of a diagnostic suite (i.e., a collection of tests) to be executed by a physical entity.
Main OID:
ciscoEntityDiagMIB.1.3.6.1.4.1.9.9.350
108
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
108 total| Object Name |
|---|
ciscoEntityDiagMIBThis MIB module defines the managed objects that describe the
online diagnostics capabilities supported by the
physical entities contained by the system, including chassis,
modules, ports, power supplies, fans, and sensors. In order to
manage the online diagnostic capabilities supported by
a physical entity, it must be represented by a conceptual row
in the entPhysicalTable of the ENTITY-MIB (RFC-2737).
GLOSSARY
Boot-up Diagnostic - a diagnostic consisting of tests intended
to be executed in a reasonable timeframe when a physical entity
boots.
Diagnostic - a suite of tests intended to exercise the
functional integrity of a physical entity.
Diagnostic Level - the degree of completeness that a diagnostic
will exercise a physical entity.
Field Diagnostic - a special suite of tests intended to
exercise the functional integrity of a physical entity in a
manner that is possible when a physical entity is
operational or running an operational image.
Field Diagnostic Image - an image supporting field diagnostics.
A physical entity has to be loaded with a field diagnostic
image before field diagnostics can be executed on the physical
entity.
Health Monitoring - the process of running special
non-intrusive online tests periodically on a physical entity
for the purpose of tracking the overall condition of a physical
entity.
On-Demand Diagnostic - a diagnostic intended to be executed
immediately upon request.
Offline Diagnostic - a diagnostic that consists of tests that
are disruptive in nature, and thus requires the physical entity
being evaluated to be taken offline for the duration.
Online Diagnostic - a diagnostic that consists of tests that
are not disruptive in nature, and thus can be done without
taking the physical entity offline.
Physical Entity - an identifiable physical resource, such as a
chassis, line card, power supply, or communication port. See
RFC-2737, 'Entity MIB (Version 2)', K. McCloghrie and A.
Bierman.
Scheduled Diagnostic - a diagnostic intended to execute at some
time in the future. There exist two types of scheduled
diagnostics: 1) one-shot, which execute only once; and 2)
periodic, which executes at a specific interval.
Test - an exercise intended to determine the functional
integrity of a component comprising a physical entity (e.g., a
port might support an internal loopback test).
Diagnostic Job - Consists of a diagnostic suite
(i.e., a collection of tests) to be executed by a physical
entity. MODULE-IDENTITY .1.3.6.1.4.1.9.9.350 |
ciscoEntityDiagMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.350.0 |
ceDiagBootUpFailedNotifA ceDiagBootUpFailedNotif is sent if the online diagnostic
discovers a boot up failure for a physical entity. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.350.0.1 |
ceDiagHMThresholdReachedNotifA ceDiagHMThresholdReachedNotif is sent if the number of
consecutive failure of a Health Monitoring test reaches
the configured threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.350.0.2 |
ceDiagHMTestRecoverNotifA ceDiagHMTestRecoverNotif is sent when no error is
detected for the first time on the same Health Monitoring test
which previously triggered ceDiagHMThresholdReachedNotif. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.350.0.3 |
ceDiagScheduledTestFailedNotifA ceDiagScheduledTestFailedNotif is sent if a scheduled
test failed. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.350.0.4 |
ciscoEntityDiagMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.350.1 |
ceDiagDescriptions OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.350.1.1 |
ceDiagTestInfoTableThis table describes the tests supported by each physical
entity supporting online diagnostics. The table
organizes tests into sets associated with the physical entity
supporting those tests.
The SNMP entity adds a set of tests corresponding to a physical
entity upon detection of a physical entity supporting
online diagnostics.
The SNMP entity deletes a set of tests corresponding to a
physical entity upon removal of the physical entity.
The SNMP entity replaces a set of tests corresponding to a
physical entity when the physical entity has been successfully
loaded with a different image (e.g., the field diagnostic
image). SEQUENCE OF CeDiagTestInfoEntry .1.3.6.1.4.1.9.9.350.1.1.1 |
ceDiagTestInfoEntryThe description of a single test supported by a corresponding
physical entity. CeDiagTestInfoEntry .1.3.6.1.4.1.9.9.350.1.1.1.1 |
ceDiagTestIdThis object indicates an arbitrary positive integer
arbitrarily identifying the test. CeDiagTestIdentifier (CISCO-ENTITY-DIAG-TC-MIB) .1.3.6.1.4.1.9.9.350.1.1.1.1.1 |
ceDiagTestTextThis object indicates a human-readable description of the
test. Examples include:
'Marching Pattern DRAM Test'
'Data Pins DRAM Test'
'Internal Loopback Test'
'External Loopback Test'ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.350.1.1.1.1.2 |
ceDiagTestAttributesThis object indicates a set of attributes characterizing the
test:
'minimal' - indicates that this test will be executed
during boot-up if ceDiagBootupLevel is set
to 'minimal' or 'complete'. This test is
also included in the minimal or complete
test suites.
'complete' - indicates that this test will be executed
during boot-up if ceDiagBootupLevel is set
to 'complete'. This test is also included
in the complete test suites.
'perPort' - indicates that this test is a executed for
each port contained by the module. This
test is also included in the perPort test
suites.
'fatal' - indicates that if this test fails, then the
diagnostic should fail indicating that a
major error occurred.
'basicOnDemand' - indicates that this test will be
run during the basic on demand job is run.
'standby' - indicates that this test can only be run
if the physical entity is a standby unit
and can only be executed from the standby
unit.
'parallel' - indicates that this test can be executed in
parallel with other tests without checking
for resource availability.
'nonDisruptive' - indicates this test can be executed without
disrupting the physical entity's normal
operation. This test is also included in
the nonDisruptive test suites.
'hmAlwaysEnabled' - indicates that a management application can
not disable the use of this test for the
purpose of health monitoring.
'hmFixedInterval' - indicates that a management application can
not change the interval at which health
monitoring executes this test.
'nonHM' - indicates that this test can not be used for
health monitoring.
'proxy' - indicates that the test must be executed
through a proxy.
'activeToStandby' - indicates that this test can only be run if
the physical entity is a standby unit and
can only be executed from the active unit.
'offline' - indicates that this test will not get a user
confirmation when it is run.
'perDevice' - indicates that this test is a per device test.
'disruptive' - indicates that this test can be executed with
disrupting the physical entity's normal
operation. This test is also included in
the disruptive test suites.ro Bits .1.3.6.1.4.1.9.9.350.1.1.1.1.3 |
ceDiagTestCustomAttributeTableThis table describes the additional custom based attributes
of the tests listed in ceDiagTestInfoTable. These are attributes
which have been customized by the platform supporting the tests. SEQUENCE OF CeDiagTestCustomAttributeEntry .1.3.6.1.4.1.9.9.350.1.1.2 |
ceDiagTestCustomAttributeEntryThe description of a single custom based attribute for a test
supported by a corresponding physical entity. CeDiagTestCustomAttributeEntry .1.3.6.1.4.1.9.9.350.1.1.2.1 |
ceDiagTestCustomAttributeIndexAn arbitrary integer which identifies the custom based attribute
of a test. Unsigned32 .1.3.6.1.4.1.9.9.350.1.1.2.1.1 |
ceDiagTestCustomAttributeDescThis object provides a textual description of the custom based
attribute of this test.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.350.1.1.2.1.2 |
ceDiagErrorInfoTableThis table describes the errors indicated by a system
supporting online diagnostics. SEQUENCE OF CeDiagErrorInfoEntry .1.3.6.1.4.1.9.9.350.1.1.3 |
ceDiagErrorInfoEntryThe description of a single online error. CeDiagErrorInfoEntry .1.3.6.1.4.1.9.9.350.1.1.3.1 |
ceDiagErrorIdThis object indicates an arbitrary positive integer
arbitrarily identifying the error. CeDiagErrorIdentifier (CISCO-ENTITY-DIAG-TC-MIB) .1.3.6.1.4.1.9.9.350.1.1.3.1.1 |
ceDiagErrorTextThis object indicates a human-readable description of the
error. Examples include:
'DIAG_SUCCESS'
'DIAG_FAILURE'
'DIAG_NOT_SUPPORT'
'DIAG_SKIPPED'ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.350.1.1.3.1.2 |
ceDiagGlobalConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.350.1.2 |
ceDiagBootupLevelThis object specifies the level that physical entities will
execute their boot-up diagnostic.rw CeDiagDiagnosticLevel (CISCO-ENTITY-DIAG-TC-MIB) .1.3.6.1.4.1.9.9.350.1.2.1 |
ceDiagEntity OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.350.1.3 |
ceDiagEntityTableThis table supports online diagnostic control and
status for each physical entity that supporting the feature.
The SNMP entity adds a conceptual row to this table
corresponding to a physical entity upon detection of a physical
entity supporting online diagnostics.
The SNMP entity deletes a conceptual row from this table
corresponding to a physical entity upon removal of the physical
entity. SEQUENCE OF CeDiagEntityEntry .1.3.6.1.4.1.9.9.350.1.3.1 |
ceDiagEntityEntryOnline diagnostic control and status for a single
physical entity supporting the feature. Observe that this data
may not be accurate if the corresponding cefcModuleOperStatus
(see the CISCO-ENTITY-FRU-CONTROL-MIB for further details) has
a value of 'boot'. CeDiagEntityEntry .1.3.6.1.4.1.9.9.350.1.3.1.1 |
ceDiagEntityBootLevelThis object indicates the level that the physical entity
executed its boot-up diagnostic.ro CeDiagDiagnosticLevel (CISCO-ENTITY-DIAG-TC-MIB) .1.3.6.1.4.1.9.9.350.1.3.1.1.1 |
ceDiagEntityImageAdminStatusThis object specifies the desired image the physical entity
should be running:
'operational' - the physical entity should be running the
operational image.
'fieldDiagnostic' - the physical entity should be running the
field diagnostic image.rw Enumeration .1.3.6.1.4.1.9.9.350.1.3.1.1.2 |
ceDiagEntityImageOperStatusThis object indicates the actual image the physical entity is
running:
'operational' - the physical entity is running the
operational image.
'fieldDiagnostic' - the physical entity is running the field
diagnostic image.
'booting' - the physical entity is booting; that is,
there is no way of determining what image
the physical entity is running because it
is currently booting.ro Enumeration .1.3.6.1.4.1.9.9.350.1.3.1.1.3 |
ceDiagEntityFieldDiagnosticUrlThis object specifies a URL (see RFC-1630) that specifies the
location of the field diagnostic image. The following list
provides some examples of URLs for the field diagnostic:
file://disk0:/images/fd001
Describes a file with the path '/images/fd001' on 'disk0:'
accessed locally.
ftp://pop-server/usr/bin/fd001
Describes a file with the path '/usr/bin/fd001' on the host
'pop-server' accessed via FTP.
tftp://pop-server/tftpout/fd001
Describes a file with the path '/tftpout/fd001' on the host
'pop-server' accessed via TFTP.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.350.1.3.1.1.4 |
ceDiagEntityCurrentTestTableThis table contains the information about the current test
executing on a physical entity. SEQUENCE OF CeDiagEntityCurrentTestEntry .1.3.6.1.4.1.9.9.350.1.3.2 |
ceDiagEntityCurrentTestEntryA test which is currently executing on a particular physical
entity. CeDiagEntityCurrentTestEntry .1.3.6.1.4.1.9.9.350.1.3.2.1 |
ceDiagEntityCurrentTestMethodThis object indicates the method used to invoke the diagnostic
that is executing this test.ro CeDiagDiagnosticMethod (CISCO-ENTITY-DIAG-TC-MIB) .1.3.6.1.4.1.9.9.350.1.3.2.1.1 |
ceDiagOnDemand OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.350.1.4 |
ceDiagOnDemandErrorAllowedThis object specifies the number of errors the physical
entities will allow before aborting an on demand diagnostic job.
A value of '0' indicates that the an unlimited number of
errors are allowed for the on demand diagnostic job.rw Unsigned32 .1.3.6.1.4.1.9.9.350.1.4.1 |
ceDiagOnDemandErrorActionThis object specifies how the physical entities in the
system are to proceed when they encounter an error during
an on demand diagnostic job.
'continue' - indicates that the physical entities will continue
executing the on demand job.
'stop' - indicates that the physical entities will abort
the on demand job.rw Enumeration .1.3.6.1.4.1.9.9.350.1.4.2 |
ceDiagOnDemandIterationsThis object specifies the maximum number of iterations of an
on demand job.rw Unsigned32 .1.3.6.1.4.1.9.9.350.1.4.3 |
ceDiagOnDemandJobTableThis table contains a list of on demand jobs currently in the
system.
A row in this table can be created by setting the corresponding
instance of ceDiagOnDemandJobRowStatus to 'createAndGo'.
A row can be deleted by setting the corresponding instance of
ceDiagOnDemandJobRowStatus to 'destroy'. Once the job is
completed the corresponding row is deleted from the table.
The individual results of the tests executed by this job are
updated in ceDiagTestPerfTable. SEQUENCE OF CeDiagOnDemandJobEntry .1.3.6.1.4.1.9.9.350.1.4.4 |
ceDiagOnDemandJobEntryA on demand job currently executing on a particular physical
entity which supports on demand diagnostics. CeDiagOnDemandJobEntry .1.3.6.1.4.1.9.9.350.1.4.4.1 |
ceDiagOnDemandJobSuiteThis object indicates the various system predefined test
suites the on demand job can choose from.
If the value of this object is 'none', this job will run
the tests specified by ceDiagOnDemandJobTestList.
If the value of this object is 'complete', 'minimal',
'nonDisruptive' or 'perPort' the value of
ceDiagOnDemandJobTestList is ignored.rw CeDiagJobSuite (CISCO-ENTITY-DIAG-TC-MIB) .1.3.6.1.4.1.9.9.350.1.4.4.1.1 |
ceDiagOnDemandJobTestListThis object specifies the user specified diagnostic suite
(i.e., a set of tests) to be executed by the corresponding
physical entity.
The set of tests supported by this physical entity are
specified in ceDiagTestInfoTable.rw CeDiagTestList (CISCO-ENTITY-DIAG-TC-MIB) .1.3.6.1.4.1.9.9.350.1.4.4.1.2 |
ceDiagOnDemandJobPortListThis object specifies the list of ports to be exercised by the
corresponding physical entity when executing the diagnostic
suite specified for the job.rw CeDiagPortList (CISCO-ENTITY-DIAG-TC-MIB) .1.3.6.1.4.1.9.9.350.1.4.4.1.3 |
ceDiagOnDemandJobRowStatusThe status object used to manage the rows in this table.
When set to active(1) the on demand job is submitted.
When set to destroy(6) the on demand job is stopped.
When the value of this object is 'active', values within
this row cannot be modified, except by deleting and
re-creating the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.350.1.4.4.1.4 |
ceDiagScheduled OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.350.1.5 |
ceDiagScheduledJobTableThis table contains a list of scheduled jobs on the system.
A row in this table can be created by setting the corresponding
instance of ceDiagScheduledJobRowStatus to 'createAndGo'.
A row can be deleted by setting the corresponding instance of
ceDiagScheduledJobRowStatus to 'destroy'. Once the job is
completed the corresponding row is deleted from the table.
The individual results of the tests executed by this job are
updated in ceDiagTestPerfTable. SEQUENCE OF CeDiagScheduledJobEntry .1.3.6.1.4.1.9.9.350.1.5.1 |
ceDiagScheduledJobEntryA job currently scheduled on a particular physical
entity. CeDiagScheduledJobEntry .1.3.6.1.4.1.9.9.350.1.5.1.1 |
ceDiagScheduledJobIndexAn arbitrary non-zero integer value that uniquely identifies a
single scheduled job with respect to a physical entity. CeDiagJobIdentifier (CISCO-ENTITY-DIAG-TC-MIB) .1.3.6.1.4.1.9.9.350.1.5.1.1.1 |
ceDiagScheduledJobTypeThis object specifies the type of the scheduled job.
'scheduledOneShot' - the physical entity will invoke
this job at the time specified
by ceDiagScheduledJobStart.
'scheduledPeriodicDaily' - the physical entity will
first invoke this job at the time
specified by
ceDiagScheduledJobStart and
continue invoking it daily at the
same time.
'scheduledPeriodicWeekly' - the corresponding physical entity
will first invoke this job at the
time and day of the week specified
by ceDiagScheduledJobStart and
ceDiagScheduledJobDayOfWeek, and
continue to invoke it weekly at
the same time and day.rw Enumeration .1.3.6.1.4.1.9.9.350.1.5.1.1.2 |
ceDiagScheduledJobStartThis object specifies when a scheduled job will be executed.
If the value of ceDiagScheduledJobType is 'scheduledOneShot',
then this object only applies to the first execution of the job.
If the value of ceDiagScheduledJobType is
'scheduledPeriodicDaily' or 'scheduledPeriodicWeekly', then the
first four octets of this objects should be zero.
If the physical entity's job queue already contains a job
scheduled for execution at this time, then the process of
submitting the job will fail.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.9.9.350.1.5.1.1.3 |
ceDiagScheduledJobDayOfWeekThis object specifies the day of the week for a
weekly periodic scheduled job. The value of
of this object must be specified if the value of
ceDiagScheduledJobType is 'scheduledPeriodicWeekly'.
This value of this object is set to 'notApplicable'
if the value of ceDiagScheduledJobType is 'scheduledOneShot'
or 'scheduledPeriodicDaily'.rw Enumeration .1.3.6.1.4.1.9.9.350.1.5.1.1.4 |
ceDiagScheduledJobTestListThis object specifies the diagnostic suite (i.e., a set of
tests) to be executed by the corresponding physical entity.
The set of tests supported by this physical entity are
specified in ceDiagTestInfoTable.rw CeDiagTestList (CISCO-ENTITY-DIAG-TC-MIB) .1.3.6.1.4.1.9.9.350.1.5.1.1.5 |
ceDiagScheduledJobPortListThis object specifies the list of ports to be tested by the
corresponding physical entity when executing the diagnostic
suite specified for the job.rw CeDiagPortList (CISCO-ENTITY-DIAG-TC-MIB) .1.3.6.1.4.1.9.9.350.1.5.1.1.6 |
ceDiagScheduledJobRowStatusThe status object used to manage the rows in this table.
When set to 'active' the scheduled job is submitted.
When set to destroy(6) the scheduled job is cleared.
When the value of this object is 'active', values within
this row cannot be modified, except by deleting and
re-creating the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.350.1.5.1.1.7 |
ceDiagScheduledJobSuiteThis object indicates the various system predefined test
suites the on scheduled job can choose from.
If the value of this object is 'none', this job will run
the tests specified by ceDiagScheduledJobTestList.
If the value of this object is 'complete', 'minimal',
'nonDisruptive' or 'perPort' the value of
ceDiagScheduledJobTestList is ignored.rw CeDiagJobSuite (CISCO-ENTITY-DIAG-TC-MIB) .1.3.6.1.4.1.9.9.350.1.5.1.1.8 |
ceDiagTest OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.350.1.6 |
ceDiagTestPerfTableThis table maintains data concerning the performance of tests
executed by each physical entity supporting the online
diagnostic feature. The table organizes tests into sets
associated with the physical entity supporting those tests.
The SNMP entity adds a set of tests corresponding to a physical
entity upon detection of a physical entity supporting
online diagnostics.
The SNMP entity deletes a set of tests corresponding to a
physical entity upon removal of the physical entity.
The SNMP entity replaces a set of tests corresponding to a
physical entity when the physical entity has been successfully
loaded with a different image (e.g., the field diagnostic
image). SEQUENCE OF CeDiagTestPerfEntry .1.3.6.1.4.1.9.9.350.1.6.1 |
ceDiagTestPerfEntryData concerning the performance of a single test. CeDiagTestPerfEntry .1.3.6.1.4.1.9.9.350.1.6.1.1 |
ceDiagTestPerfLastResultThis object indicates the result the last time this test was
executed by the corresponding physical entity:
'unknown' - the corresponding physical entity has not executed
the test.
'fail' - the test executed and detected at least one
failure.
'pass' - the test executed without detecting a failure.
'skipped' - the test was skipped due to insufficient resources.ro Enumeration .1.3.6.1.4.1.9.9.350.1.6.1.1.1 |
ceDiagTestPerfLastErrorIDThis object indicates the last error code of this test.
Details of the non-zero error code can be found in the
corresponding entry in ceDiagErrorInfoTable.ro CeDiagErrorIdentifierOrZero (CISCO-ENTITY-DIAG-TC-MIB) .1.3.6.1.4.1.9.9.350.1.6.1.1.2 |
ceDiagTestPerfLastRunThis object indicates the last time the
corresponding physical entity executed this test. If the value
of ceDiagTestPerfLastResult is 'unknown', then the value of
this object is irrelevant.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.9.9.350.1.6.1.1.3 |
ceDiagTestPerfFirstFailThis object indicates the first time
the corresponding physical entity executed this test and it
failed. The value of this object is irrelevant if the value of
ceDiagTestPerfTotalFails is 0.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.9.9.350.1.6.1.1.4 |
ceDiagTestPerfLastSuccessThis object indicates the last time the
corresponding physical entity executed this test and
it passed. The value 0x0000010100000000 indicates
that the corresponding physical entity has not
passed this test yet.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.9.9.350.1.6.1.1.5 |
ceDiagTestPeffLastFailThis object indicates the last time the
corresponding physical entity executed this test and it failed.
If the value of ceDiagTestPerfTotalFails is 0, then the value
of this object is irrelevant.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.9.9.350.1.6.1.1.6 |
ceDiagTestPerfTotalRunsThis object indicates the total number of times the
corresponding physical entity has executed the test.ro Counter32 .1.3.6.1.4.1.9.9.350.1.6.1.1.7 |
ceDiagTestPerfTotalFailsThis object indicates the total number of times the
corresponding physical entity has executed the test and the
test resulted with a failure.ro Counter32 .1.3.6.1.4.1.9.9.350.1.6.1.1.8 |
ceDiagTestPerfConsecutiveFailsThis object indicates the consecutive number of times the
corresponding physical entity has executed the test and it has
failed. The value of this object will be reset to '0' when the
physical entity executes the test and it succeeds.ro Gauge32 .1.3.6.1.4.1.9.9.350.1.6.1.1.9 |
ceDiagTestPerfLastTestMethodThis object indicates the testing method used for the
last time this test was executed by the corresponding
physical entity.ro CeDiagDiagnosticMethod (CISCO-ENTITY-DIAG-TC-MIB) .1.3.6.1.4.1.9.9.350.1.6.1.1.10 |
ceDiagHealthMonitor OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.350.1.7 |
ceDiagHMSyslogEnabledThis object specifies whether the system will generate
syslog messages due to the tests run by health
monitor.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.350.1.7.1 |
ceDiagHMTestTableThis table describes attributes specific to the health monitor
for tests supported by a physical entity. SEQUENCE OF CeDiagHMTestEntry .1.3.6.1.4.1.9.9.350.1.7.2 |
ceDiagHMTestEntryThe attributes of a single test specific to the health
monitor. CeDiagHMTestEntry .1.3.6.1.4.1.9.9.350.1.7.2.1 |
ceDiagHMTestEnabledThis object specifies whether this test is enabled for
health monitor.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.350.1.7.2.1.1 |
ceDiagHMTestIntervalMinThis object indicates the minimum interval which the health
monitor can periodically invoke this test.ro Unsigned32 .1.3.6.1.4.1.9.9.350.1.7.2.1.2 |
ceDiagHMTestIntervalDefaultThis object indicates the default interval which the health
monitor will periodically invoke this test. A value of '0'
indicates that the health monitor will not invoke the test.ro Unsigned32 .1.3.6.1.4.1.9.9.350.1.7.2.1.3 |
ceDiagHMTestIntervalThis object specifies the interval at which the health monitor
periodically invokes this test. A value of '0' indicates that
the health monitor will not invoke the test. A value of '0'
cannot be set.rw Unsigned32 .1.3.6.1.4.1.9.9.350.1.7.2.1.4 |
ceDiagHMTestThresholdDefaultThis object indicates the default consecutive failure
count threshold. When the specified failure count threshold
is reached, the diagnostic test result is set to failure.
A value of '0' indicates that the health monitor will not
invoke this test.ro Unsigned32 .1.3.6.1.4.1.9.9.350.1.7.2.1.5 |
ceDiagHMTestThresholdThis object specifies the consecutive failure count threshold
for this test. When the specified failure count threshold is
reached, the diagnostic test result is set to failure.
A value of '0' indicates that there is no failure count
threshold for this test.
This object is used in combination with
ceDiagHMTestThreshWindowSuite and ceDiagHMTestThreshWindowSize
to specify a sliding history window for which the threshold
is monitored.
When the value of ceDiagHMTestThreshWindowSuite is
'default', the sliding history window is in number of test
runs, with a window size the same as the value of this
object.
If ceDiagHMTestThreshWindowSuite and
ceDiagHMTestThreshWindowSize are not supported, the failure
count threshold will be the consecutive failure count threshold.rw Unsigned32 .1.3.6.1.4.1.9.9.350.1.7.2.1.6 |
ceDiagHMTestThreshWindowSuiteThis object specifies a sliding history window
parameter which is used in combination with
ceDiagHMTestThreshold. When the specified failure count
threshold is reached in this sliding history window,
the diagnostic test result is set to failure.
'default' - The sliding history window is in number
of test runs or executions, with a window
size the same as ceDiagHMTestThreshold.
'milliseconds' - The sliding history window is in milli-seconds
specified by ceDiagHMTestThreshWindowSize.
'seconds' - The sliding history window is in seconds
specified by ceDiagHMTestThreshWindowSize.
'minutes' - The sliding history window is in minutes
specified by ceDiagHMTestThreshWindowSize.
'hours' - The sliding history window is in hours
specified by ceDiagHMTestThreshWindowSize.
'days' - The sliding history window is in days
specified by ceDiagHMTestThreshWindowSize.
'runs' - The sliding history window is in number
of test runs or executions specified by
ceDiagHMTestThreshWindowSize.
When the value of this object is 'default' the user cannot set
any value for ceDiagHMTestThreshWindowSize.
When the value of this object is not 'default',
then the value of ceDiagHMTestThreshWindowSize cannot be zero (0).rw Enumeration .1.3.6.1.4.1.9.9.350.1.7.2.1.7 |
ceDiagHMTestThreshWindowSizeThis object indicates the sliding history window size.
When the value of ceDiagHMTestThreshWindowSuite is 'default', the
user cannot set any value for this object.
The value of zero (0) cannot be set.rw Unsigned32 .1.3.6.1.4.1.9.9.350.1.7.2.1.8 |
ceDiagEvents OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.350.1.8 |
ceDiagEventLogSizeThis object specifies the maximum number of entries which the
event log buffer can contain.rw Unsigned32 .1.3.6.1.4.1.9.9.350.1.8.1 |
ceDiagEventCountThis object specifies the number of entries currently stored
in the event log buffer.ro Unsigned32 .1.3.6.1.4.1.9.9.350.1.8.2 |
ceDiagEventMaxQueriesMaximum number of query entries allowed in the
ceDiagEventQueryTable.ro Unsigned32 .1.3.6.1.4.1.9.9.350.1.8.3 |
ceDiagEventQueryTableA control table used to query the event log buffer. Each row
instance in the table represents a query with its parameters.
The resulting data for each instance of a query in this table
is stored in the ceDiagEventResultTable.
A row in this table can be created by setting the corresponding
instance of ceDiagEventQueryStatus to 'createAndGo'.
A row can be deleted by setting the corresponding instance of
ceDiagEventQueryStatus to 'destroy'. SEQUENCE OF CeDiagEventQueryEntry .1.3.6.1.4.1.9.9.350.1.8.4 |
ceDiagEventQueryEntryA conceptual row of the ceDiagEventQueryTable used to setup
a event log buffer query to search for diagnostic events.
The actual search is started by when the value of
ceDiagEventQueryStatus is set to 'active'. CeDiagEventQueryEntry .1.3.6.1.4.1.9.9.350.1.8.4.1 |
ceDiagEventQueryIndexAn arbitrary integer in the range of 1 to
ceDiagEventMaxQueries to identify this control query. Unsigned32 .1.3.6.1.4.1.9.9.350.1.8.4.1.1 |
ceDiagEventQueryPhysicalIndexThis object specifies the physical entity for the event
log buffer query. A value of zero indicates that the
query will return events of all physical entities.rw EntPhysicalIndexOrZero (CISCO-TC) .1.3.6.1.4.1.9.9.350.1.8.4.1.2 |
ceDiagEventQuerySeverityThis object specifies the severity of the event log buffer
query. A value of 'all' indicates that the search will return
events of all severities.rw Enumeration .1.3.6.1.4.1.9.9.350.1.8.4.1.3 |
ceDiagEventQueryOwnerThe manager entity that configured this entry and is therefore
using the resources assigned to it. It is used to model an
administratively assigned name of the owner of a resource.
It is recommended that this object have one or more the following
information: IP address, management station name, network
manager's name, location, or phone number.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.350.1.8.4.1.4 |
ceDiagEventQueryResultingRowsThe result status of the query. Possible values are:
-1 - Either the query has not been initiated or
the agent is busy processing this query instance.
Time to completion of the query processing
depends on the complexity of the query and
the number of matches that satisfy this query.
0..2147483647 - The search has ended and this is the number of
rows in the ceDiagEventResultTable, resulting
from this query.ro Integer32 (-1..2147483647) .1.3.6.1.4.1.9.9.350.1.8.4.1.5 |
ceDiagEventQueryStatusThe status object used to manage rows in this table.
When set to 'active', the query to search for diagnostic
events is initiated. Once a row becomes active, values
within the row cannot be modified, except by deleting
and re-creating the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.350.1.8.4.1.6 |
ceDiagEventResultTableA table containing event log information corresponding
to all the completed queries set up in ceDiagEventQueryTable.
The query result will not become available until the current
search is completed. SEQUENCE OF CeDiagEventResultEntry .1.3.6.1.4.1.9.9.350.1.8.5 |
ceDiagEventResultEntryA conceptual row in ceDiagEventResultTable, containing
information about an event that matches the search criteria
set in the corresponding row of ceDiagEventQueryTable. CeDiagEventResultEntry .1.3.6.1.4.1.9.9.350.1.8.5.1 |
ceDiagEventResultIndexA positive integer which uniquely identifies a result
entry matching a particular query. Unsigned32 .1.3.6.1.4.1.9.9.350.1.8.5.1.1 |
ceDiagEventResultPhysicalIndexThis object specifies the physical entity corresponding
to this event.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.9.9.350.1.8.5.1.2 |
ceDiagEventResultPhysicalDescrThis object specifies a textual description of physical
entity corresponding to this event.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.350.1.8.5.1.3 |
ceDiagEventResultTimeThis object specifies the time at which this event occurred.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.9.9.350.1.8.5.1.4 |
ceDiagEventResultSeverityThis object indicates the severity of this event.ro Enumeration .1.3.6.1.4.1.9.9.350.1.8.5.1.5 |
ceDiagEventResultLogTextThe text message of this event.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.350.1.8.5.1.6 |
ceDiagEventErrorMsgThe error message related to the notification.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.350.1.8.6 |
ceDiagNotificationControl OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.350.1.9 |
ceDiagEnableBootUpFailedNotifThis variable specifies whether the system produces the
ceDiagBootUpFailedNotif. A 'false' value will prevent
ceDiagBootUpFailedNotif notifications from being
generated by this system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.350.1.9.1 |
ceDiagEnableHMThreshReachedNotifThis variable specifies whether the system produces the
ceDiagHMThresholdReachedNotif. A 'false' value will prevent
ceDiagHMThresholdReachedNotif notifications from being
generated by this system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.350.1.9.2 |
ceDiagEnableHMTestRecoverNotifThis variable specifies whether the system produces the
ceDiagHMTestRecoverNotif. A 'false' value will prevent
ceDiagHMTestRecoverNotif notifications from being
generated by this system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.350.1.9.3 |
ceDiagEnableSchedTestFailedNotifThis variable specifies whether the system produces the
ceDiagScheduledTestFailedNotif. A 'false' value will prevent
ceDiagScheduledTestFailedNotif notifications from being
generated by this system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.350.1.9.4 |
ciscoEntityDiagMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.350.2 |
ciscoEntityDiagMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.350.2.1 |
ciscoEntityDiagMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.350.2.2 |