CISCO-ENTITY-ASSET-MIB
AI MIB Summary
The CISCO-ENTITY-ASSET-MIB enables Cisco network devices to expose and manage inventory attributes, including manufacturer, model number, serial number, and part ID, for physical entities defined within the ENTITY-MIB. This module facilitates automated asset tracking and configuration management by mapping logical entity table entries to their corresponding hardware identification data.
Monitor the asset information of items in the ENTITY-MIB (RFC 2037) entPhysical table.
Main OID:
ciscoEntityAssetMIB.1.3.6.1.4.1.9.9.92
23
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
23 total| Object Name |
|---|
ciscoEntityAssetMIBMonitor the asset information of items in the ENTITY-MIB
(RFC 2037) entPhysical table. MODULE-IDENTITY .1.3.6.1.4.1.9.9.92 |
ciscoEntityAssetMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.92.1 |
ceAssetTableThis table lists the orderable part number, serial number,
hardware revision, manufacturing assembly number and revision,
firmwareID and revision if any, and softwareID and revision if
any, of relevant entities listed in the ENTITY-MIB
entPhysicalTable.
Entities for which none of this data is available are not
listed in this table. This is a sparse table so some of these
variables may not exist for a particular entity at a particular
time. For example, a powered-off module does not have
softwareID and revision; a power-supply would probably never
have firmware or software information.
Although the data may have other items encoded in it (for
example manufacturing-date in the serial number) please treat
all data items as monolithic. Do not decompose them or parse
them. Use only string equals and unequals operations on them. SEQUENCE OF CeAssetEntry .1.3.6.1.4.1.9.9.92.1.1 |
ceAssetEntryAn entAssetEntry entry describes the asset-tracking related
data for an entity. CeAssetEntry .1.3.6.1.4.1.9.9.92.1.1.1 |
ceAssetOEMStringThis variable indicates the Original Equipment Manufacturer
of the entity.rodeprecated SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.92.1.1.1.1 |
ceAssetSerialNumberThis variable indicates the serial number of the entity.rodeprecated SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.92.1.1.1.2 |
ceAssetOrderablePartNumberThis variable indicates the part number you can use to order
the entity.rodeprecated SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.92.1.1.1.3 |
ceAssetHardwareRevisionThis variable indicates the engineering design revision of the
hardware of the entity.rodeprecated SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.92.1.1.1.4 |
ceAssetMfgAssyNumberThis variable indicates the manufacturing assembly number,
which is the 'hardware' identification.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.92.1.1.1.5 |
ceAssetMfgAssyRevisionThis variable indicates the revision of the entity, within
the ceAssetMfgAssyNumber.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.92.1.1.1.6 |
ceAssetFirmwareIDThis variable indicates the firmware installed on this entity.
For IOS devices, this variable's value is in the IOS Image
Naming Convention format.
IOS Image Naming Convention
Software images are named according to a scheme that identifies
what's in the image and what platform it runs on. The names have
three parts, separated by dashes: e.g. xxxx-yyyy-ww.
xxxx = Platform
yyyy = Features
ww = Where it executes from and if compressedrodeprecated SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.92.1.1.1.7 |
ceAssetFirmwareRevisionThis variable indicates the revision of firmware installed on this
entity.
For IOS devices, this variable's value is in the NGRP external
customer-visible format.
NGRP external customer-visible revision strings have this format:
'x.y (z [p] ) [A] [ [ u ( v [ p ] ) ] ] [ q ]',
where:
- x.y Combination of two 1-2 digit numerics separated by a
'.' that identify the Software major release
- z 1-3 digit numeric that identifies the maintenance release
of x.y
- A 1-3 alpha letters, designator of the release train.
- u 1-2 digit numeric that identifies the version of the
ED-specific code
- v 1-2 digit numeric that identifies the maintenance release of
the ED-specific code
- v 1-2 digit numeric that identifies the maintenance release of
the ED-specific code
- p 1 alpha letter that identifies the unusual special case SW
Line Stop Fast Re-build by the Release Ops team to replace
the posted/shipping release in CCO and Mfg with a version
containing a critical catastrophic defect fix that cannot
wait until the next maintenance release
- q 3 alphanumeric optional suffix used as an indicator in the
image banner by the SW Line Stop Re-build process used
unusual special case situation when the renumber build has
occurred but the images have not been released (value always
blank unless these special circumstances require
its use).rodeprecated SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.92.1.1.1.8 |
ceAssetSoftwareIDThis variable indicates the software installed on this entity.
For IOS devices, this variable's value is in the IOS Image Naming
Convention format.
IOS Image Naming Convention
Software images are named according to a scheme that identifies
what's in the image and what platform it runs on. The names have
three parts, separated by dashes: e.g. xxxx-yyyy-ww.
xxxx = Platform
yyyy = Features
ww = Where it executes from and if compressedrodeprecated SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.92.1.1.1.9 |
ceAssetSoftwareRevisionThis variable indicates the revision of software installed on this
entity.
For IOS devices, this variable's value is in the NGRP external
customer-visible format.
NGRP external customer-visible revision strings have this format:
'x.y (z [p] ) [A] [ [ u ( v [ p ] ) ] ] [ q ]',
where:
- x.y Combination of two 1-2 digit numerics separated by a
'.' that identify the Software major release
- z 1-3 digit numeric that identifies the maintenance release
of x.y
- A 1-3 alpha letters, designator of the release train.
- u 1-2 digit numeric that identifies the version of the
ED-specific code
- v 1-2 digit numeric that identifies the maintenance release of
the ED-specific code
- p 1 alpha letter that identifies the unusual special case SW
Line Stop Fast Re-build by the Release Ops team to replace
the posted/shipping release in CCO and Mfg with a version
containing a critical catastrophic defect fix that cannot
wait until the next maintenance release
- q 3 alphanumeric optional suffix used as an indicator in the
image banner by the SW Line Stop Re-build process used
unusual special case situation when the renumber build has
occurred but the images have not been released (value always
blank unless these special circumstances require
its use).rodeprecated SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.92.1.1.1.10 |
ceAssetCLEIThis object represents the CLEI (Common Language Equipment
Identifier) code for the physical entity.
If the physical entity is not present in the system, or does
not have an associated CLEI code, then the value of this
object will be a zero-length string.ro SnmpAdminString .1.3.6.1.4.1.9.9.92.1.1.1.11 |
ceAssetAliasThis object is an 'alias' name for the physical entity as
specified by a network manager, and provides a non-volatile
'handle' for the physical entity.
On the first instantiation of an physical entity, the value
of entPhysicalAlias associated with that entity is set to
the zero-length string. However, agent may set the value to
a locally unique default value, instead of a zero-length
string.
If write access is implemented for an instance of
entPhysicalAlias, and a value is written into the instance,
the agent must retain the supplied value in the
entPhysicalAlias instance associated with the same physical
entity for as long as that entity remains instantiated. This
includes instantiations across all re-initializations/reboots
of the network management system, including those which result
in a change of the physical entity's entPhysicalIndex value.rwdeprecated SnmpAdminString .1.3.6.1.4.1.9.9.92.1.1.1.12 |
ceAssetTagThis object is a user-assigned asset tracking identifier
for the physical entity as specified by a network manager,
and provides non-volatile storage of this information.
On the first instantiation of an physical entity, the value
of ceasAssetID associated with that entity is set to the
zero-length string.
Not every physical component will have a asset tracking
identifier, or even need one. Physical entities for which
the associated value of the ceAssetIsFRU object is equal to
'false' (e.g., the repeater ports within a repeater module),
do not need their own unique asset tracking identifier. An
agent does not have to provide write access for such
entities, and may instead return a zero-length string.
If write access is implemented for an instance of
ceasAssetID, and a value is written into the instance, the
agent must retain the supplied value in the ceasAssetID
instance associated with the same physical entity for as
long as that entity remains instantiated. This includes
instantiations across all re-initializations/reboots of
the network management system, including those which result
in a change of the physical entity's entPhysicalIndex value.
If no asset tracking information is associated with the
physical component, then this object will contain a zero-
length string.rwdeprecated SnmpAdminString .1.3.6.1.4.1.9.9.92.1.1.1.13 |
ceAssetIsFRUThis object indicates whether or not this physical entity
is considered a 'field replaceable unit' by the vendor. If
this object contains the value 'true' then the corresponding
entPhysicalEntry identifies a field replaceable unit. For
all entPhysicalEntries which represent components that are
permanently contained within a field replaceable unit, the
value 'false' should be returned for this object.rodeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.92.1.1.1.14 |
ciscoEntityAssetMIBNotificationsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.92.2 |
ciscoEntityAssetMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.92.2.0 |
ciscoEntityAssetMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.92.3 |
ciscoEntityAssetMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.92.3.1 |
ciscoEntityAssetMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.92.3.2 |