CISCO-ENERGYWISE-MIB
AI MIB Summary
The CISCO-ENERGYWISE-MIB facilitates centralized power management across Cisco network devices and connected non-networking endpoints (such as lighting controllers) by monitoring real-time wattage consumption, provisioning levels, and power state vectors (shut, hibernate, sleep, standby). It enables hierarchical domain control where parent entities act as "nannies" for child devices, allowing administrators to enforce time-based power policies, aggregate energy usage via queries, and differentiate device criticality to optimize network-wide energy efficiency.
The MIB is used to manage and optimize power usage in networks.
Cisco EnergyWise is a specification of data, discovery and protocols for managing power on and between network devices.
An entity is Cisco EnergyWise compatible, if it complies with Cisco EnergyWise specification.
A Cisco EnergyWise entity is characterized by the power related attributes of a physical entity present in ENTITY-MIB.
Cisco EnergyWise solves the problem of Network Power Management. One of goals of Cisco EnergyWise is to manage power on network level. Some solutions in FCAPS have focused on managing a single element but Cisco EnergyWise provides the capability to handle the management of a network of devices, as well as a single device.
Concepts and Definitions: ========================= Cisco EnergyWise Entity: A physical entity that is part of the network that provides power or draws power from another part of the network.
Cisco EnergyWise Level: A uniform way to classify power settings on an EnergyWise entity. Levels are guidelines for the manufacturers of entity (e.g., shut, hibernate, sleep, standby).
Cisco EnergyWise Usage: The consumption of power by a Cisco EnergyWise entity in watts.
Current The current power consumption by an Cisco EnergyWise entity.
Provisioned The maximum power a Cisco EnergyWise entity can draw in the current level.
Usage Vector A vector 0..10 representing the maximum power a Cisco EnergyWise entity can draw at each level.
Delta Vector This defines a vector 0..10 representing the difference between the Current and Usage Vector for each level.
Cisco EnergyWise Entity Power Unit: This is used to represent smaller or larger quantities of Cisco EnergyWise usage and conforms to the standard prefixes for the SI (System International) units of measure. The value represents an exponent of 10.
For example, if current usage of an EnergyWise entity is 3, it could be 3 W, 3 mW, 3 KW, 3 MW depending on the value of Cisco EnergyWise power unit, i.e. 0, -3, 3, or 6 respectively.
Cisco EnergyWise Domain: A collection of entities that is divided into manageable sets. Switch, IP phones, IP cameras, lighting controllers can be Cisco EnergyWise entities, all part of a domain. A domain can contain multiple devices.
Cisco EnergyWise Entity Importance: The importance attribute of an entity enables the management station to differentiate other Cisco EnergyWise entities in the domain with a different business context. This also provides a choice to the administrators to manage power in context of importance.
For example, assuming we have 2 phones deployed in a enterprise. One phone is in a shared spare office and one used by trader generating lot of money as part of core business of enterprise.
This clearly demonstrates that the phone used by trader is more important than the phone used in the spare office.
Nanny Vector: A vector of bits, representing different features (E.g., sleep, wakeup, shutdown) supported on a Cisco EnergyWise entity. Setting of some of the features on the Cisco EnergyWise entity can be managed by itself, but for some others, a parent has to nanny.
Nanny: An EnergyWise entity acts on behalf of another
another Cisco EnergyWise entity.
Cisco EnergyWise Parent: A Cisco EnergyWise entity that does not have a nanny vector. This entity can manage all its power setting for itself as well as for Cisco EnergyWise entities contained in it. The contained in relationship is same as defined in ENTITY-MIB.
Cisco EnergyWise Child: A Cisco EnergyWise entity that has a nanny vector. It requires a Cisco EnergyWise parent to serve as nanny. Depending on the nanny vector a Cisco EnergyWise child can be fully or partially managed.
Cisco EnergyWise Neighbor: A Cisco EnergyWise entity to which Cisco EnergyWise protocol events can be forwarded to. An entity can either discover a neighbor using a discovery protocol, or the neighbor can be configured as a static neighbor by the Management station. A Cisco EnergyWise parent may also nanny a Cisco EnergyWise neighbor.
For example, A Cisco EnergyWise compatible entity like an IP phone, connected to a port on the switch, can provide a nanny vector to the switch to serve as a nanny.
Cisco EnergyWise Proxy: A device attached to a port that does not understand the Cisco EnergyWise protocol, but has the provision to manage power through network APIs or a proprietary protocol.
A Proxy is always configured on a port. It allows the Cisco EnergyWise protocol to be used with other non networking devices that draw power indirectly.
For example, a Lutron controller (building lighting controller) is a nonnetworking device which does not understand Cisco EnergyWise protocol. However, it runs a proprietary BACNET protocol.
The following diagram represents the relationship between cewEntTable and cewNeighborTable, cewEntTable and cewProxyTable.
Points to a
- nbr entry for -
| EntPhyIdx | NbrId | which it does | NbrId | Name |
- Nanny -
| 101 | 1 |->| 1 | IP-Phone1 |
- -
| 102 | 0 | | 2 | Switch1 |
- -
| 103 | 3 |->| 3 | IP-Phone2 |
- -
| 104 | 0 |
- | -
| 105 | 0 |- | | | |
- | | -
| | Points to proxy | | - entry configured | | | EntPhyIdx | PrxyId | Name | on this port. | | - | | | - | | | | | | -
-
| | | |
-
Cisco EnergyWise Event: It is a policy that can be either configured on a Cisco EnergyWise entity or received from other Cisco EnergyWise entities. Using this, a Cisco EnergyWise entity can adjust its power settings according to some criteria, typically time.
For example, a Management station can configure an EnergyWise event on a switch to control devices in branch offices, to go to power level standby at 8pm and power level full at 7am.
Cisco Energywise Query: It is a Cisco Energywise CLI used to get power information from the entire Energywise Domain. Queries are delivered, hop by hop, through the Domain using the established neighbor information. Authentication is by the domain's shared secret, and only authenticated queries can be sent to EndPoints. EnergyWise supports various kinds of queries, including set, collect, sum and delta.
set: changes or turns off power usage levels
collect: retrieves power usage information (in watts) from
the cloud.
sum: aggregates power information across multiple Members
and Endpoints.
delta: runs what if calculations.
Cisco EnergyWise Neighbor Id : The Cisco EnergyWise Neighbor's unique Id is made up of two parts:-
UDI: Unique Device Indentification of the Cisco EnergyWise
Neighbor.
EntPhysicalIndex: The Entity Physical Index of the Cisco
EnergyWise Neighbor. A combination of these two values provide a unique Id for the Cisco EnergyWise Neighbor.
Main OID:
ciscoEnergywiseMIB.1.3.6.1.4.1.9.9.683
115
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
115 total| Object Name |
|---|
ciscoEnergywiseMIBThe MIB is used to manage and optimize power usage
in networks.
Cisco EnergyWise is a specification of data, discovery and
protocols for managing power on and between network devices.
An entity is Cisco EnergyWise compatible, if it complies with
Cisco EnergyWise specification.
A Cisco EnergyWise entity is characterized by the power related
attributes of a physical entity present in ENTITY-MIB.
Cisco EnergyWise solves the problem of Network Power
Management. One of goals of Cisco EnergyWise is to manage
power on network level. Some solutions in FCAPS have focused
on
managing a single element but Cisco EnergyWise provides the
capability to handle the management of a network of devices, as
well as a single device.
Concepts and Definitions:
=========================
Cisco EnergyWise Entity: A physical entity that is part of the
network that provides power or draws power from another
part of the network.
Cisco EnergyWise Level: A uniform way to classify power
settings on an EnergyWise entity. Levels are guidelines for
the manufacturers of entity (e.g., shut, hibernate, sleep,
standby).
Cisco EnergyWise Usage: The consumption of power by a Cisco
EnergyWise entity in watts.
Current The current power consumption by an
Cisco EnergyWise entity.
Provisioned The maximum power a Cisco EnergyWise
entity can draw in the current level.
Usage Vector A vector 0..10 representing the maximum
power a Cisco EnergyWise entity can draw at
each level.
Delta Vector This defines a vector 0..10 representing
the difference between the Current and
Usage Vector for each level.
Cisco EnergyWise Entity Power Unit: This is used to represent
smaller or larger quantities of Cisco EnergyWise usage and
conforms to the standard prefixes for the SI (System
International) units of measure. The value represents an
exponent of 10.
For example, if current usage of an EnergyWise entity is
3, it could be 3 W, 3 mW, 3 KW, 3 MW depending on the value
of Cisco EnergyWise power unit, i.e. 0, -3, 3, or 6
respectively.
Cisco EnergyWise Domain: A collection of entities that is
divided into manageable sets. Switch, IP phones, IP cameras,
lighting controllers can be Cisco EnergyWise entities, all part
of a domain. A domain can contain multiple devices.
Cisco EnergyWise Entity Importance: The importance attribute of
an entity enables the management station to differentiate other
Cisco EnergyWise entities in the domain with a different
business context. This also provides a choice to the
administrators to manage power in context of importance.
For example, assuming we have 2 phones deployed in a
enterprise. One phone is in a shared spare office and one
used by trader generating lot of money as part of core
business of enterprise.
This clearly demonstrates that the phone used by trader is
more important than the phone used in the spare office.
Nanny Vector: A vector of bits, representing different features
(E.g., sleep, wakeup, shutdown) supported on a Cisco
EnergyWise entity. Setting of some of the features on the
Cisco EnergyWise entity can be managed by itself, but for some
others, a parent has to nanny.
Nanny: An EnergyWise entity acts on behalf of another
another Cisco EnergyWise entity.
Cisco EnergyWise Parent: A Cisco EnergyWise entity that does
not have a nanny vector. This entity can manage all its power
setting for itself as well as for Cisco EnergyWise entities
contained in it. The contained in relationship is same as
defined in ENTITY-MIB.
Cisco EnergyWise Child: A Cisco EnergyWise entity that has a
nanny vector. It requires a Cisco EnergyWise parent to serve
as nanny. Depending on the nanny vector a Cisco EnergyWise
child can be fully or partially managed.
Cisco EnergyWise Neighbor: A Cisco EnergyWise entity to which
Cisco EnergyWise protocol events can be forwarded to. An
entity can either discover a neighbor using a discovery
protocol, or the neighbor can be configured as a static
neighbor
by the Management station. A Cisco EnergyWise parent may also
nanny a Cisco EnergyWise neighbor.
For example, A Cisco EnergyWise compatible entity like an
IP phone, connected to a port on the switch, can provide a
nanny vector to the switch to serve as a nanny.
Cisco EnergyWise Proxy: A device attached to a port that does
not understand the Cisco EnergyWise protocol, but has the
provision to manage power through network APIs or a proprietary
protocol.
A Proxy is always configured on a port. It allows the
Cisco EnergyWise protocol to be used with other non networking
devices that draw power indirectly.
For example, a Lutron controller (building lighting
controller) is a nonnetworking device which does not
understand Cisco EnergyWise protocol. However, it runs a
proprietary BACNET protocol.
The following diagram represents the relationship between
cewEntTable and cewNeighborTable,
cewEntTable and cewProxyTable.
Points to a
- nbr entry for -
| EntPhyIdx | NbrId | which it does | NbrId | Name |
- Nanny -
| 101 | 1 |->| 1 | IP-Phone1 |
- -
| 102 | 0 | | 2 | Switch1 |
- -
| 103 | 3 |->| 3 | IP-Phone2 |
- -
| 104 | 0 |
- | -
| 105 | 0 |- | | | |
- | | -
| |
Points to proxy | | -
entry configured | | | EntPhyIdx | PrxyId | Name |
on this port. | | -
| |
| -
| | | | |
| -
-
| | | |
-
Cisco EnergyWise Event: It is a policy that can be either
configured on a Cisco EnergyWise entity or received from
other Cisco EnergyWise entities. Using this, a Cisco
EnergyWise entity can adjust its power settings according
to some criteria, typically time.
For example, a Management station can configure an
EnergyWise event on a switch to control devices in branch
offices, to go to power level standby at 8pm and power
level full at 7am.
Cisco Energywise Query: It is a Cisco Energywise CLI used to
get
power information from the entire Energywise Domain. Queries
are
delivered, hop by hop, through the Domain using the established
neighbor information. Authentication is by the domain's shared
secret, and only authenticated queries can be sent to
EndPoints. EnergyWise supports various kinds of queries,
including set, collect, sum and delta.
set: changes or turns off power usage levels
collect: retrieves power usage information (in watts) from
the cloud.
sum: aggregates power information across multiple Members
and Endpoints.
delta: runs what if calculations.
Cisco EnergyWise Neighbor Id : The Cisco EnergyWise Neighbor's
unique Id is made up of two parts:-
UDI: Unique Device Indentification of the Cisco EnergyWise
Neighbor.
EntPhysicalIndex: The Entity Physical Index of the Cisco
EnergyWise Neighbor.
A combination of these two values provide a unique Id for the
Cisco EnergyWise Neighbor. MODULE-IDENTITY .1.3.6.1.4.1.9.9.683 |
ciscoEnergywiseMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.683.0 |
cewLevelChangeThe SNMP entity generates the cewLevelChange when
the value of cewEntityEnergyLevel has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.683.0.1 |
cewNeighborAddedThe SNMP entity generates a ceweighborAdded when
it discovers a Cisco EnergyWise entity neighbor. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.683.0.2 |
cewNeighborDeletedThe SNMP entity generates a cewNeighborDeleted trap when an
Cisco EnergyWise entity neighbor is deleted. A neighbor can
be deleted in the following ways:
1. The neighbor lost its connection with the current Cisco
EnergyWise entity.
2. The management station deletes a neighbor entry.
3. Another management interfaces (e.g., local console)
deletes the static neighbor. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.683.0.3 |
cewEventOccuredThe SNMP entity generates cewEventOccured when an
Cisco EnergyWise event occurs. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.683.0.4 |
cewEventOccuredRev1The SNMP entity generates cewEventOccured when an
Cisco EnergyWise event occurs. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.683.0.5 |
ciscoEnergywiseMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.683.1 |
cewDeviceIdThis object indicates the Cisco EnergyWise identifier assigned
to the device.ro EnergywiseId .1.3.6.1.4.1.9.9.683.1.1 |
cewDeviceNeighborCountThis object indicates the current number of neighbors.ro Gauge32 UNITS "neighbors" .1.3.6.1.4.1.9.9.683.1.2 |
cewDomainNameThis object specifies the domain name of the Cisco EnergyWise
entity. This object specifies a null string if no domain name
is configured.
If write access is implemented for an instance of
cewDomainName, and a value is written into the instance, the
agent must retain the supplied value in the cewDomainName
instance associated with the same physical entity for as long
as that entity remains instantiated. This includes
instantiations across all re-initializations/reboots of the
network management system, including those which result in a
change of the physical entity's entPhysicalIndex value.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.683.1.3 |
cewMaxImportanceThis object indicates the maximum importance value
among all the Cisco EnergyWise entities in the domain.ro Gauge32 UNITS "importance" .1.3.6.1.4.1.9.9.683.1.4 |
cewMaxImportanceIdThis object indicates the Cisco EnergyWise identifier of the
Cisco EnergyWise entity having maximum importance in the
domain.ro EnergywiseId .1.3.6.1.4.1.9.9.683.1.5 |
cewEntTableThis table lists Cisco EnergyWise entities. This table has a
sparse dependent relationship on the entPhysicalTable, where
this table contains a row for each physical entity that is Cisco
EnergyWise compliant. SEQUENCE OF CewEntEntry .1.3.6.1.4.1.9.9.683.1.6 |
cewEntEntryAn entry describes attributes of a Cisco EnergyWise entity.
Whenever the device creates/destroys a Cisco EnergyWise
compliant entity, the device creates/destroys a row in the
cewEntTable. CewEntEntry .1.3.6.1.4.1.9.9.683.1.6.1 |
cewEntNannyVectorThis object indicates the nanny vector of the current
Cisco EnergyWise entity.
powerWakeUp(0): Feature to wake up a Cisco EnergyWise
entity.
powerLevel1(1): Feature to set to power level 1(shut).
powerLevel2(2): Feature to set to power level
2(hibernate).
powerLevel3(3): Feature to set to power level 3(sleep).
powerLevel4(4): Feature to set to power level 4(standby)
powerLevel5(5): Feature to set to power level 5(ready).
powerLevel6(6): Feature to set to power level 6(low).
powerLevel7(7): Feature to set to power level 7(frugal).
powerLevel8(8): Feature to set to power level 8(medium).
powerLevel9(9): Feature to set to power level 9(reduced).
powerLevel10(10): Feature to set to power level 10(high).
powerLevel11(11): Feature to set to power level 11(full).
powerShutNWakeUp: Feature to shutdown and wake up a Cisco
EnergyWise entity.
powerUsage: Feature to manage Cisco EnergyWise usage of
a Cisco EnergyWise entity.
powerImportance: Feature to manage Cisco EnergyWise
importance of a Cisco EnergyWise entity.ro Bits .1.3.6.1.4.1.9.9.683.1.6.1.1 |
cewEntNeighborIndexThis object indicates an arbitrary unsigned integer-value that
uniquely identifies the Cisco EnergyWise neighbor, for which the
current Cisco EnergyWise entity serves as a nanny.ro Unsigned32 .1.3.6.1.4.1.9.9.683.1.6.1.2 |
cewEntKeywordThis object specifies the EnergywiseKeywordList with which this
entity is tagged. This object specifies the null string if no
keyword has been configured.
If write access is implemented for an instance of cewEntKeyword,
and a value is written into the instance, the agent must retain
the supplied value in the cewEntKeyword instance associated with
the same physical entity for as long as that entity remains
instantiated. This includes instantiations across all
re-initializations/reboots of the network management system,
including those which result in a change of the physical
entity's entPhysicalIndex value.rw EnergywiseKeywordList .1.3.6.1.4.1.9.9.683.1.6.1.3 |
cewEntNameThis object specifies an administratively assigned human
readable name to the Cisco EnergyWise entity.
For example, we can have a switch deployed to lobby
with cewEntName as 'LL'.
This object specifies a null string if no name is configured.
If write access is implemented for an instance of cewEntName,
and a value is written into the instance, the agent must retain
the supplied value in the cewEntname instance associated with
the same physical entity for as long as that entity remains
instantiated. This includes instantiations across all
re-initializations/reboots of the network management system,
including those which result in a change of the physical
entity's entPhysicalIndex value.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.683.1.6.1.4 |
cewEntRoleDescriptionThis object specifies an administratively assigned name to
indicate the purpose a Cisco EnergyWise entity serves in the
network.
For example, we can have switches deployed to a lobby
with cewEntName as 'LL', cewEntRoleDescription as
'LobbySwitch'.
This object specifies a null string if no role description is
configured.
If write access is implemented for an instance of
cewEntRoleDescription, and a value is written into the
instance, the agent must retain the supplied value in the
cewEntRoleDescription instance associated with the same
physical entity for as long as that entity remains
instantiated. This includes instantiations across all re-
initializations/reboots of the network management system,
including those which result in a change of the physical
entity's entPhysicalIndex value.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.683.1.6.1.5 |
cewEntFullNameThis object specifies the full name of a Cisco EnergyWise
entity. This name is the combination of the cewDomainName,
cewEntRoleDescription, cewEntName.
For example, we can have a switch deployed to lobby with
cewEntFullName as 'com.cisco.bldg19.LobbySwitch.LL'
where,
cewDomainName - gcom.cisco.bldg19
cewEntRole - LobbySwitch
cewEntName - LLro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.683.1.6.1.6 |
cewEntEnergyUnitsThis object indicates the units of power for the Cisco
EnergyWise entity.
The value of this column applies to the following objects:
cewEntEnergyUsage
cewEntEnergyUsageProvisioned.ro EnergywisePowerUnits .1.3.6.1.4.1.9.9.683.1.6.1.7 |
cewEntEnergyUsageThis object indicates the current usage for the Cisco
EnergyWise entity. This should be less than or equal to
the power that can be consumed at that specified level.ro Unsigned32 .1.3.6.1.4.1.9.9.683.1.6.1.8 |
cewEntEnergyUsageCaliberThis object specifies the type of the usage data reported by
cewEntityEnergyUsage.
max: This indicates that the actual power drawn cannot be
determined. A presumed value that is the maximum the
Cisco EnergyWise entity could draw is provided.
presumed: This indicates that the actual power drawn cannot
be determined but can be presumed from the model.
A dell box X draws 200W, Dell Model y draws 210W.
actual: This indicates that the usage data reported is not
presumed or max but the real power drawn. A PoE phone
drawing X amount of power can be determined by reading from
the port. A PoE phone can report the actual usage as X W.
unknown: This indicates that the usage reported is unknown.
In some cases, entities report aggregate power like what a
lighting controller or aggregate controller does. In such
cases it is not known whether the usage reported is actual
or presumed.
trusted: This indicates that the usage data reported was
reported from another source.ro Enumeration .1.3.6.1.4.1.9.9.683.1.6.1.9 |
cewEntEnergyLevelThis object specifies the current power level for the
Cisco EnergyWise entity.ro EnergywiseLevel .1.3.6.1.4.1.9.9.683.1.6.1.10 |
cewEntEnergyUsageProvisionedThis object indicates the maximum power a Cisco EnergyWise
entity can draw at current level.ro Unsigned32 .1.3.6.1.4.1.9.9.683.1.6.1.11 |
cewEntImportanceIntThis object specifies Cisco EnergyWise importance for the
Cisco EnergyWise entity.rw Unsigned32 .1.3.6.1.4.1.9.9.683.1.6.1.12 |
cewEntImportanceExtThis object indicates the sum of its own importance and
intrinsic importance of all the entities dependent on it.ro Unsigned32 .1.3.6.1.4.1.9.9.683.1.6.1.13 |
cewEntImportanceRelativeThis object indicates the relative importance of a Cisco
EnergyWise entity with respect to the maximum importance
value in the domain.
It is derived using the formula:
(cewEntImportanceExt / cewEntMaxImportance) * 100.ro Unsigned32 .1.3.6.1.4.1.9.9.683.1.6.1.14 |
cewEntImportanceParentIdThis object indicates a Cisco EnergyWise entity, which
identifies itself as important for the current entity's
functionality in the network.
For example, assume a network consisting of switches, IP
phones and a call manager (device which supports call
related operations in a phone).
Though an IP phone derives its power from the switch, it
will not work if the call-manager is not operational. It
clearly demonstrates the importance of the call-manager in
the network. Hence it is the parent of the IP phones in
terms of importance.
Given a parent and child relationship this can be read as,
child (IP phone) needs parent (call manager).
Importance calculations enable the management stations to
identify the Cisco EnergyWise entities that support other
Cisco EnergyWise entities and weigh them as more important
to the network as a whole.ro EnergywiseId .1.3.6.1.4.1.9.9.683.1.6.1.15 |
cewEntParentIdThis object indicates the Cisco EnergyWise parent of this
entity.
If a Cisco EnergyWise entity is a Cisco EnergyWise parent,
then the value of this column is the null string.ro EnergywiseId .1.3.6.1.4.1.9.9.683.1.6.1.16 |
cewEntAdminStatusA control object to indicate the administratively desired state
for the Cisco EnergyWise entity.
up: enables Cisco EnergyWise protocol on the entity.
down: disables Cisco EnergyWise protocol on the entity.rw Enumeration .1.3.6.1.4.1.9.9.683.1.6.1.17 |
cewEntOperStatusThis object indicates the operational status for the
Cisco EnergyWise entity.
If the cewEntAdminStatus is down(2), then cewEntOperStatus
should be down(2).
If cewEntAdminStatus is changed to up(1), then cewEntOperStatus
should change to up(1), unless some error has occurred, then it
should be in error(3) state.ro Enumeration .1.3.6.1.4.1.9.9.683.1.6.1.18 |
cewEntConfiguredLevelThis object specifies the level set by the network
administrator. The value of this object could change if the
recurrence event is fired.
When a network administrator sets the level of this object the
value of cewEntEnergyLevel will change to that value if the
configured level is successfully accepted by the system.rw EnergywiseLevel .1.3.6.1.4.1.9.9.683.1.6.1.19 |
cewEntEnergyUsageCategoryThis object specifies the energy usage type of this Cisco
Energywise Entity.
consumer: This indicates that the Cisco Energywise Entity
consumes energy.
producer: This indicates that the Cisco Energywise Entity
generates energy.
meter: This indicates that the Cisco Energywise Entity is a
meter which reads the energy consumed or produced.ro Enumeration .1.3.6.1.4.1.9.9.683.1.6.1.20 |
cewEntEnergyUsageDirectionThis object specifies the direction of the energy usage by this
Cisco EnergyWise Entity, with respect to the power grid.
out: This indicates that the power is being consumed or drawn
out of the power grid by the Cisco EnergyWise Entity.
in: This indicates that the power is being produced and supplied
into the power grid by the Cisco EnergyWise Entity.ro Enumeration .1.3.6.1.4.1.9.9.683.1.6.1.21 |
cewEntAllowSetThis object specifies the value of the flag used to determine
if the Cisco Energywise Query Set is set to true/false. If the
flag is set to true, the cli, energywise allow query set is
activated for this Cisco Energywise Entity.
When its set to false, the user will be prevented from setting
the parameters from the query. For more information on Cisco
Energywise Queries, refer to the description above.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.683.1.6.1.22 |
cewEntActivityCheckThis object specifies the value of the flag used to determine
if activity check is allowed or not on this Cisco Energywise
Entity. If the flag is set to true, Energywise allows activity
check to be done on this Cisco Energywise Entity.Activity check
is done to determine if an IP Phone entity connected to the
switch is in use or not before the port can be turned OFF or
ON.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.683.1.6.1.23 |
cewLevelTableThis table lists the power usage at each level for each
Cisco EnergyWise entity.
This table has an expansion dependent relationship on the
cewEntTable, containing rows describing each level for the
corresponding Cisco EnergyWise entity. SEQUENCE OF CewLevelEntry .1.3.6.1.4.1.9.9.683.1.7 |
cewLevelEntryA cewLevelEntry extends a corresponding cewEntEntry. This
entry displays max usage and delta values at each level.
For example,
Given the values of a Cisco EnergyWise entity as below:
Level Usage UsageProvisioned
2 11 15
UsageVector DeltaVector
(0,10,15,25,35,...100) (11, 1, -4, -14, -24,...,-89) CewLevelEntry .1.3.6.1.4.1.9.9.683.1.7.1 |
cewLevelIndexThis object indicates the level for which this entry describes
the power usage. EnergywiseLevel .1.3.6.1.4.1.9.9.683.1.7.1.1 |
cewLevelMaxUsageThis object indicates the maximum power usage for the
Cisco EnergyWise entity at the particular level.ro Unsigned32 .1.3.6.1.4.1.9.9.683.1.7.1.2 |
cewLevelDeltaUsageThis object indicates the delta; that is the difference between
the current cewEntityEnergyUsage and the cewLevelMaxUsage
value of a Cisco EnergyWise entity at a level.ro Integer32 (-2147483648..2147483647) .1.3.6.1.4.1.9.9.683.1.7.1.3 |
cewLevelUnitsThis object indicates the Cisco EnergyWise power units for
cewLevelMaxUsage and cewLevelDeltaUsage values.ro EnergywisePowerUnits .1.3.6.1.4.1.9.9.683.1.7.1.4 |
cewProxyTableThis table lists Cisco EnergyWise proxies.
This table has an expansion dependent relationship on the
cewEntTable, containing zero or more rows for each row in the
cewEntTable. SEQUENCE OF CewProxyEntry .1.3.6.1.4.1.9.9.683.1.8 |
cewProxyEntryAn entry describes the attributes, required to be configured
on a Cisco EnergyWise entity to reach the Cisco EnergyWise
proxy.
An entry is created/deleted in cewProxyTable, whenever an
Cisco EnergyWise entity is configured/unconfigured with above
attributes. CewProxyEntry .1.3.6.1.4.1.9.9.683.1.8.1 |
cewProxyIdThis object indicates an arbitrary unsigned integer-value that
uniquely identifies the proxy. Unsigned32 .1.3.6.1.4.1.9.9.683.1.8.1.1 |
cewProxyAddressTypeThis object specifies the address type used for
cewProxyAddress.
Cisco EnergyWise proxy entries are only valid for the address
type of ipv4(1) and ipv6(2).rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.683.1.8.1.2 |
cewProxyAddressThis object specifies the IP address of the proxy.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.683.1.8.1.3 |
cewProxyPortThis object specifies the port used by the proxy.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.683.1.8.1.4 |
cewProxyClassThis object specifies a string which a network administrator
can use to classify Cisco EnergyWise proxies to particular
proxy type.
For example, all the building controllers (Cisco EnergyWise
proxies which understand BACNET proprietary protocol) will be
tagged with 'BACNET' string.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.683.1.8.1.5 |
cewProxyStorageThis object specifies the memory realization of a Cisco
EnergyWise proxy.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.9.9.683.1.8.1.6 |
cewProxyStatusThis object indicates the status of this proxy.
Once the entry status has been set to active(1), the entry
cannot be modified. The only operation possible after this is
to delete the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.683.1.8.1.7 |
cewNeighborTableThis table lists Cisco EnergyWise neighbors.
Cisco EnergyWise entity reports its connection to the network
via a discovery protocol. When a new Cisco EnergyWise neighbor
is discovered, this table is updated with the new entry. When
the Cisco EnergyWise neighbor looses its connection,
corresponding neighbor entry is deleted from the table. SEQUENCE OF CewNeighborEntry .1.3.6.1.4.1.9.9.683.1.9 |
cewNeighborEntryAn entry in the cewNeighborTable.
An entry describes the attributes of the Cisco EnergyWise
neighbor, either discovered through a discovery protocol
or has been added as a static neighbor by the management
station. CewNeighborEntry .1.3.6.1.4.1.9.9.683.1.9.1 |
cewNeighborIndexThis object indicates an arbitrary unsigned integer-value
that uniquely identifies the Cisco EnergyWise neighbor. Unsigned32 .1.3.6.1.4.1.9.9.683.1.9.1.1 |
cewNeighborIdThis object specifies the Cisco EnergyWise identifier of the
neighbor.rw EnergywiseId .1.3.6.1.4.1.9.9.683.1.9.1.2 |
cewNeighborTypeThis object specifies the type of a Cisco EnergyWise neighbor
static : specifies a neighbor which is added statically.
dynamic : specifies a neighbor added dynamically, by a
discovery protocol.
child : specifies a neighbor which needs a parent to nanny.ro Enumeration .1.3.6.1.4.1.9.9.683.1.9.1.3 |
cewNeighborHeartBeatThis object indicates the value of sysUpTime the last time
a heartbeat was received from the neighbor Cisco EnergyWise
entity.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.9.683.1.9.1.4 |
cewNeighborStorageThis object specifies the memory realization of a Cisco
EnergyWise neighbor.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.9.9.683.1.9.1.5 |
cewNeighborStatusThis object indicates the status of this neighbor.
Once the entry status has been set to active(1), the entry
cannot be modified. The only operation possible after this is
to delete the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.683.1.9.1.6 |
cewNeighborDeviceTypeThis object specifies the device type of the Cisco EnergyWise
neighbor. This object should be same as the cewDeviceType of
the neighbor.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.683.1.9.1.7 |
cewNeighborKeywordThis object specifies the EnergywiseKeywordList with
which this Cisco Energywise endpoint neighbor entity is tagged.
If cewNeighborConfiguredKeyword is successfully changed, the
new value will be copied over to cewNeighborKeyword to make both
the objects have the same value. This object specifies the null
string if no keyword has been configured.ro EnergywiseKeywordList .1.3.6.1.4.1.9.9.683.1.9.1.8 |
cewNeighborConfiguredKeywordThis object specifies the keyword configured by the network
administrator on the adjacent Cisco energywise neighbor/child
entity.
If the neighbor is of type child and a keyword is configured,
the switch will attempt to set the endpoint neighbor/child
entity with this value. If the set operation is successful,
cewNeighborKeyword will be set with the configured keyword.
This object specifies the EnergywiseKeywordList with which
current Cisco Energywise neighbor/endpoint entity is tagged.
This object specifies the null string if no keyword has been
configured.
If write access is implemented for an instance of
cewNeighborConfiguredKeyword, and a value is written into the
instance,the agent must retain the supplied value in the
cewNeighborConfiguredKeyword instance associated with the same
physical entity for as long as that entity remains instantiated.
This includes instantiations across all
re-initializations/reboots of the network management system,
including those which result in a
change of the physical entity's entPhysicalIndex value.rw EnergywiseKeywordList .1.3.6.1.4.1.9.9.683.1.9.1.9 |
cewNeighborNameThis object specifies an administratively assigned
human readable name to the Cisco Energywise endpoint
neighbor/child. If cewNeighborConfiguredName is successfully
changed, the new value will be copied over to cewNeighborName to
make both the objects have the same value. This object specifies
a null string if no name is configured.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.683.1.9.1.10 |
cewNeighborConfiguredNameThis object specifies the name configured on the adjacent
Cisco Energywise neighbor/child entity. If the neighbor is of
type child and a name is configured, the switch will attempt to
set the endpoint neighbor/child entity with this value. If
successful,cewNeighborName will be set with the configured name.
This object specifies a null string if no name is configured.
If write access is implemented for an instance of
cewNeighborConfiguredName, and a value is written into the
instance, the agent must retain the supplied value in the
cewNeighborConfiguredName instance associated with the same
physical entity for as long as that entity remains
instantiated. This includes instantiations across all
re-initializations/reboots of the network management
system, including those which result in a change of the
physical entity's entPhysicalIndex value.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.683.1.9.1.11 |
cewNeighborRoleDescriptionThis object specifies an administratively assigned
name to indicate the purpose the Cisco Energywise endpoint
neighbor/child serves in the network.If
cewNeighborConfiguredRoleDesc is
successfully changed, the new value will be copied over to
cewNeighborRoleDescription to make both the objects have the
same value. This object specifies a null string if no role
description is configured.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.683.1.9.1.12 |
cewNeighborConfiguredRoleDescThis object specifies the role configured on the adjacent
Cisco Energywise neighbor/child entity.If the neighbor is of
type child and a role is configured, the switch will attempt to
set the endpoint neighbor/child entity with this value. If
successful,
cewNeighborRoleDesc will be set with the configured role.
This object specifies an administratively assigned name to
indicate the purpose a Cisco EnergyWise entity serves in the
network.
This object specifies a null string if no role description is
configured.
If write access is implemented for an instance of
cewNeighborConfiguredRoleDesc, and a value is written into the
instance, the agent must retain the supplied value in the
cewNeighborConfiguredRoleDesc instance associated with the same
physical entity for as long as that entity remains instantiated.
This includes instantiations across all
re-initializations/reboots
of the network management system, including those which result
in
a change of the physical entity's entPhysicalIndex value.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.683.1.9.1.13 |
cewNeighborEnergyLevelThis object specifies the current power level for the
Cisco EnergyWise neighbor/child entity.ro EnergywiseLevel .1.3.6.1.4.1.9.9.683.1.9.1.14 |
cewNeighborConfiguredLevelThis object specifies the level configured on the adjacent
Cisco Energywise neighbor/child entity. If the neighbor is of
type child and a level is configured, the switch will attempt to
set the endpoint neighbor/child entity with this value. If
successful,
cewNeighborEnergyLevel will be set with the configured level.rw EnergywiseLevel .1.3.6.1.4.1.9.9.683.1.9.1.15 |
cewNeighborImportanceThis object specifies Cisco EnergyWise importance for the
Cisco EnergyWise neighbor/child entity.ro Unsigned32 .1.3.6.1.4.1.9.9.683.1.9.1.16 |
cewNeighborConfiguredImportanceThis object specifies the importance configured on the adjacent
Cisco Energywise neighbor/child entity. If the neighbor is of
type child and the importance is configured, the switch will
attempt to set the endpoint neighbor/child entity with this
value. If successful, cewNeighborImportance will be set with
the configured importance.rw Unsigned32 .1.3.6.1.4.1.9.9.683.1.9.1.17 |
cewNeighborEnergyUnitsThis object indicates the units of power for the Cisco
Energywise neighbor/child entity. The value of this column
applies to the following objects:
cewNeighborEnergyUsagero EnergywisePowerUnits .1.3.6.1.4.1.9.9.683.1.9.1.18 |
cewNeighborEnergyUsageThis object indicates the current usage for the Cisco
EnergyWise neighbor/child entity. This should be less than or
equal to the power that can be consumed at that specified
level.ro Unsigned32 .1.3.6.1.4.1.9.9.683.1.9.1.19 |
cewNeighborEnergyUsageCategoryThis object specifies the energy usage type of the
Cisco Energywise neighbor/child entity.
consumer: This indicates that the neighbor consumes energy.
producer: This indicates that the neighbor generates energy.
meter: This indicates that the neighbor is a meter which reads
the energy consumed or produced.ro Enumeration .1.3.6.1.4.1.9.9.683.1.9.1.20 |
cewNeighborEnergyUsageDirectionThis object specifies the direction of the energy usage with
respect to the power grid for this Cisco Energywise neighbor
entity.
Example: A solar panel is a consumer, drawing power during some
part of the day, taking in power from the grid. It can also
generate power out to the grid at other times.
out: This indicates that the power is being consumed or drawn
out by the Cisco EnergyWise neighbor entity.
in: This indicates that the power is being produced and supplied
back into the power grid by the Cisco EnergyWise neighbor
entity.ro Enumeration .1.3.6.1.4.1.9.9.683.1.9.1.21 |
cewNeighborMacAddressThis object specifies the MAC Address of the Cisco EnergyWise
endpoint that is connected to the Cisco EnergyWise Entity.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.9.683.1.9.1.22 |
cewNeighborPhysicalEntityIdThis object specifies the entity physical index of the Cisco
Energywise Neighbor. If the neighbor is not a cisco device that
supports the cisco entity MIB, this value will be zero.ro EntPhysicalIndexOrZero (CISCO-TC) .1.3.6.1.4.1.9.9.683.1.9.1.23 |
cewNeighborParentPortIndexThis object specifies the entPhysicalIndex of the interface
on the switch to which the Cisco EnergyWise endpoint is
connected.ro EntPhysicalIndexOrZero (CISCO-TC) .1.3.6.1.4.1.9.9.683.1.9.1.24 |
cewEventTableThis table lists Cisco EnergyWise events.
This table has an expansion dependent relationship on the
cewEntTable, containing zero or more rows for each row in the
cewEntTable. SEQUENCE OF CewEventEntry .1.3.6.1.4.1.9.9.683.1.10 |
cewEventEntryAn entry describes the attributes, required to be configured
on a Cisco EnergyWise entity, to trigger the Cisco EnergyWise
event.
An entry is created/deleted in cewEventTable, whenever an
Cisco EnergyWise entity is configured/unconfigured with
above attributes. CewEventEntry .1.3.6.1.4.1.9.9.683.1.10.1 |
cewEventIndexThis object specifies an arbitrary unsigned
integer-value that uniquely identifies the Cisco EnergyWise
event. Unsigned32 .1.3.6.1.4.1.9.9.683.1.10.1.1 |
cewEventLevelThis object specifies the level at which a Cisco EnergyWise
entity is set for an event.rw EnergywiseLevel .1.3.6.1.4.1.9.9.683.1.10.1.2 |
cewEventRecurrenceThis object specifies whether an event is a recurring
event.
true: If this policy is a recurring event.
false: If this policy is not a recurring event.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.683.1.10.1.3 |
cewEventTimeThis object specifies a string-value describing the details
regarding the time at which the event should get triggered.
For example,
00:30 Hrs on Jan, June & Dec, every weekday (Mon-Fri)
30 0 * 1,6,12 1-5
* * * * * command to be executed
- - - - -
| | | | |
| | | | +- day of week (0 - 6) Sunday=0
| | | +
| | +- day of month (1 - 31)
| +
+- min (0 - 59)
Other management interfaces (e.g., local console) will configure
time in the above manner. cewEventTime can also have wild cards
as shown in the above example.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.683.1.10.1.4 |
cewEventStorageThis object specifies the memory realization of a Cisco
EnergyWise event.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.9.9.683.1.10.1.5 |
cewEventStatusThis object indicates the status of this event.
Once the entry status has been set to active(1), the entry
cannot be modified. The only operation possible after this is
to delete the entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.683.1.10.1.6 |
cewEventImportanceThis object specifies the importance at which a Cisco
EnergyWise entity is set for an event.rw Unsigned32 .1.3.6.1.4.1.9.9.683.1.10.1.7 |
cewLevelChangeNotifEnableThis object specifies whether to enable/disable the
cewLevelChange notification.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.683.1.11 |
cewNeighborAddedNotifEnableThis object specifies whether to enable/disable the
cewNeighborAdded notification.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.683.1.12 |
cewNeighborDeletedNotifEnableThis object specifies whether to enable/disable the
cewNeighborDeleted notification.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.683.1.13 |
cewEventOccuredNotifEnableThis object specifies whether to enable/disable the
cewEventOccured notification.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.683.1.14 |
cewEventOccuredErrorCodeAn enumerated integer value that represents different
error codes when an event occurs.
noerror(1) : Event occurred without any error.
wrongtype(2) : Event was set with wrong value.
outofrange(3) : Set on event called with out of range
values.
swfault(4) : Event encountered a software fault.
hwfault(5) : Event encountered a hardware fault.ro Enumeration .1.3.6.1.4.1.9.9.683.1.15 |
cewManagementSecretThis object specifies the shared secret used to allow
Management station to authenticate itself to connect to
current Cisco EnergyWise entity via the management port over
different type of protocols like HTTP, SSH.
This object should be set by the user or network administrator
with very high access control using only SNMPv3 protocol with
authentication and privilege options.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.683.1.16 |
cewEndPointSecretThis object specifies the shared secret used to allow endpoints
to authenticate messages that are send between current Cisco
EnergyWise entity and discovered endpoints.
An endpoint is a device having the capability to receive and
respond Cisco EnergyWise communication messages.
For example, A Desktop PC or a Laptop connected to port of
a switch is an endpoint.
This object should be set by the user or network administrator
with very high access control using only SNMPv3 protocol with
authentication and privilege options.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.683.1.17 |
cewDomainSecretThis object specifies the shared secret used by all the Cisco
EnergyWise entities to determine their membership with a domain
specified by cewDomainName.
All the communications between the Cisco EnergyWise entities
will be authorized based this object to keep the communication
secure.
This object should be set by the user or network administrator
with very high access control using only SNMPv3 protocol with
authentication and privilege options.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.683.1.18 |
cewProtocolThis object specifies the protocol used for communication
between Cisco EnergyWise entities.rw Enumeration .1.3.6.1.4.1.9.9.683.1.19 |
cewAddressTypeThis object specifies the address type used for
cewAddress.
Cisco EnergyWise is only valid for the address
type of ipv4(1) and ipv6(2).rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.683.1.20 |
cewAddressThis object specifies the IP address of the interface that
sends EnergyWise communication messages.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.683.1.21 |
cewPortThis object specifies the port number used for sending and
receiving the Cisco EnergyWise communication messages.rw InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.683.1.22 |
cewEnableA control object to activate/de-activate Cisco EnergyWise
protocol at global level on a Cisco EnergyWise entity
(e.g. Switch).
This object should be set to enable state only when the
following objects are set:
cewDomainName
cewDomainSecret
cewProtocol
cewPort
cewAddressType
cewAddress
enable: enables Cisco EnergyWise protocol at a global
level on a Cisco EnergyWise entity.
disable: disables Cisco EnergyWise protocol at a global
level on a Cisco EnergyWise entity.rw Enumeration .1.3.6.1.4.1.9.9.683.1.23 |
cewVersionThis object specifies the current version of the Cisco
EnergyWise software running on a Cisco Energywise Entity.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.683.1.24 |
cewDeviceTotalUsageThis object indicates the sum of the cewEntEnergyUsage of the
current Cisco EnergyWise entity and the cewEntEnergyUsage of
all its children.ro Unsigned32 .1.3.6.1.4.1.9.9.683.1.25 |
cewDeviceTotalUsageUnitsThis object indicates the units of power for
cewDeviceTotalUsage.ro EnergywisePowerUnits UNITS "watts" .1.3.6.1.4.1.9.9.683.1.26 |
cewDeviceTypeThis object specifies the type of the Cisco EnergyWise
device.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.683.1.27 |
cewAllowSetWhen this object is set to true, the cli, energywise allow
query set is activated for the Cisco Energywise Entity.
When its set to false, the user will be prevented from setting
the parameters from the query.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.683.1.28 |
cewNeighborLevelTableThis table lists the power usage at each level for each
Cisco EnergyWise neighbor entity.
This table has an expansion dependent relationship on the
cewNeighborTable, containing rows describing each level for the
corresponding Cisco EnergyWise neighbor entity. SEQUENCE OF CewNeighborLevelEntry .1.3.6.1.4.1.9.9.683.1.29 |
cewNeighborLevelEntryA cewNeighborLevelEntry extends a corresponding
cewNeighborEntry. This entry displays max usage and delta
values at each level.
For example,
Given the values of a Cisco EnergyWise Neighbor entity as below:
Level Usage UsageProvisioned
2 11 15
UsageVector DeltaVector
(0,10,15,25,35,...100) (11, 1, -4, -14, -24,...,-89) CewNeighborLevelEntry .1.3.6.1.4.1.9.9.683.1.29.1 |
cewNeighborLevelIndexThis object indicates the level for which this neighbor
describes the power usage. EnergywiseLevel .1.3.6.1.4.1.9.9.683.1.29.1.1 |
cewNeighborLevelMaxUsageThis object indicates the maximum power usage for the
Cisco EnergyWise neighbor at the particular level.ro Unsigned32 .1.3.6.1.4.1.9.9.683.1.29.1.2 |
cewNeighborLevelDeltaUsageThis object indicates the delta; that is the difference between
the current cewNeighborEnergyUsage and the
cewNeighborLevelMaxUsage value of the Cisco EnergyWise neighbor
at a level.ro Integer32 (-2147483648..2147483647) .1.3.6.1.4.1.9.9.683.1.29.1.3 |
cewNeighborLevelUnitsThis object indicates the Cisco EnergyWise power units for
cewNeighborLevelMaxUsage
cewNeighborLevelDeltaUsagero EnergywisePowerUnits .1.3.6.1.4.1.9.9.683.1.29.1.4 |
ciscoEnergywiseMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.683.2 |
ciscoEnergywiseMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.683.2.1 |
ciscoEnergywiseMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.683.2.2 |