Home/Catalog/CISCO-DSPU-MIB

CISCO-DSPU-MIB

AI MIB Summary

The CISCO-DSPU-MIB enables the monitoring and configuration of Digital Signal Processor Unit (DSPU) resources on Cisco hardware, specifically tracking DSP channel states, resource utilization, and call processing capabilities for voice and video services.

Used to define and manage DSPU objects.
139
Objects
Active
Status
5
Dependencies

Imported Objects

SNMPv2-SMI-v1
RFC-1212
RFC-1215
SNMPv2-TC-v1
CISCO-SMI

Objects

139 total
Object Name
ciscoDspuMIB
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24
SNMPv2-SMI-v1
Unknown
.1.3.6.1.4.1.9.9.24
dspuObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.1
dspuNode
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.1.1
dspuNodeRsrbRSRB feature enabled/disabled for the DSPU node. TRUE -> RSRB feature enabled FALSE -> RSRB feature disabled If the RSRB feature is enabled, the following object values must be valid (i.e. non-zero): - dspuNodeRsrbLocalVirtualRing - dspuNodeRsrbBridgeNumber - dspuNodeRsrbTargetVirtualRing - dspuNodeRsrbVirtualMacAddressrw
TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- }
.1.3.6.1.4.1.9.9.24.1.1.1
dspuNodeRsrbLocalVirtualRingLocal virtual ring number used by the DSPU node. LocalVirtualRing is zero if RSRB is not enabled.rw
INTEGER
.1.3.6.1.4.1.9.9.24.1.1.2
dspuNodeRsrbBridgeNumberBridge number connecting the DSPU LocalVirtualRing with the RSRB TargetVirtualRing. Currently, the only valid BridgeNumber supported is 1. BridgeNumber must be one if RSRB is enabled. BridgeNumber is zero if RSRB is not enabled.rw
INTEGER
.1.3.6.1.4.1.9.9.24.1.1.3
dspuNodeRsrbTargetVirtualRingTarget virtual ring number used for RSRB. TargetVirtualRing is zero if RSRB is not enabled.rw
INTEGER
.1.3.6.1.4.1.9.9.24.1.1.4
dspuNodeRsrbVirtualMacAddressVirtual MAC address of the the DSPU node. VirtualMacAddress is zero if RSRB is not enabled.rw
MacAddress -- Rsyntax OCTET STRING
.1.3.6.1.4.1.9.9.24.1.1.5
dspuNodeDefaultPuDefault-PU feature enabled/disabled for the DSPU node. TRUE -> Default-PU feature enabled FALSE -> Default-PU feature disabledrw
TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- }
.1.3.6.1.4.1.9.9.24.1.1.6
dspuNodeDefaultPuWindowSizeSend/receive window size to be used across the link between the default-PU and a remote PU.rw
INTEGER
.1.3.6.1.4.1.9.9.24.1.1.7
dspuNodeDefaultPuMaxIframeMaximum size of an I-frame that can be transmitted/received across the link between the default-PU and a remote PU.rw
INTEGER
.1.3.6.1.4.1.9.9.24.1.1.8
dspuNodeActivationWindowActivation pacing window used by the DSPU node to limit the number of activation RUs sent for a given SAP before waiting for responses from the remote.rw
INTEGER
.1.3.6.1.4.1.9.9.24.1.1.9
dspuNodeLastConfigChgTimeTimestamp of last change to DSPU configuration parameters. LastConfigChgTime reflects any change in DSPU configuration.ro
TimeStamp -- Rsyntax TimeTicks
.1.3.6.1.4.1.9.9.24.1.1.10
dspuPoolClass
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.1.2
dspuPoolClassTableTable listing defined pool classes for the DSPU node. A pool class is defined at the DSPU node as a pool of upstream LUs that may be shared among downstream PUs. Each entry in the table represents a separate pool class definition. Entries in the table may not be created/deleted; however, values in existing entries may be modified. Pool classes are created when an existing LU is defined as a member of the pool class.
SEQUENCE OF DspuPoolClassEntry
.1.3.6.1.4.1.9.9.24.1.2.1
dspuPoolClassEntryEach entry represents a defined pool class.
DspuPoolClassEntry
.1.3.6.1.4.1.9.9.24.1.2.1.1
dspuPoolClassIndexIndex of a pool class entry in the dspuPoolClassTable.
Integer32
.1.3.6.1.4.1.9.9.24.1.2.1.1.1
dspuPoolClassNameName identifier of the pool class.rw
DisplayString
.1.3.6.1.4.1.9.9.24.1.2.1.1.2
dspuPoolClassInactivityTimeoutValue (in minutes) of the inactivity timeout that will be applied to active LU sessions assigned from the pool class. The inactivity timeout feature for pooled LUs is disabled if the InactivityTimeout value is zero.rw
INTEGER
.1.3.6.1.4.1.9.9.24.1.2.1.1.3
dspuPoolClassOperUpStreamLuDefsNumber of upstream LUs defined in the pool class.ro
Integer32
.1.3.6.1.4.1.9.9.24.1.2.1.1.4
dspuPoolClassOperDnStreamLuDefsNumber of downstream LUs defined in the pool class.ro
Integer32
.1.3.6.1.4.1.9.9.24.1.2.1.1.5
dspuPooledLu
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.1.3
dspuPooledLuTableTable listing all LUs defined in a specified pool class. The entries in the table provide information such that the downstream LUs in the pool can be correlated with the upstream LUs to which they may be assigned and vice versa. If all upstream LUs have been assigned, downstream LUs may be waiting for assignment. If there are no downstream LUs waiting for assignment, upstream LUs may be unassigned.
SEQUENCE OF DspuPooledLuEntry
.1.3.6.1.4.1.9.9.24.1.3.1
dspuPooledLuEntryEach entry represents an LU that is defined as a member of the specified pool class.
DspuPooledLuEntry
.1.3.6.1.4.1.9.9.24.1.3.1.1
dspuPooledLuPeerPuIndexIndex (dspuPuOperIndex) of the peer PU that owns the peer LU. PeerPuIndex is zero if peer LU has not been assigned.ro
Integer32
.1.3.6.1.4.1.9.9.24.1.3.1.1.1
dspuPooledLuPeerLuLocalAddressNAU address (dspuLuOperLuLocalAddress) of the peer LU. PeerLuLocalAddress is zero if peer LU has not been assigned.ro
INTEGER
.1.3.6.1.4.1.9.9.24.1.3.1.1.2
dspuPu
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.1.4
dspuPuAdminTableTable listing all defined upstream/downstream PUs that are owned by the DSPU node. NOTE: The dspuPuAdminTable does not include default downstream PUs that may be dynamically created.
SEQUENCE OF DspuPuAdminEntry
.1.3.6.1.4.1.9.9.24.1.4.1
dspuPuAdminEntryEach entry represents a defined upstream/downstream PU.
DspuPuAdminEntry
.1.3.6.1.4.1.9.9.24.1.4.1.1
dspuPuAdminIndexIndex of the PU entry in the dspuPuAdminTable.
Integer32
.1.3.6.1.4.1.9.9.24.1.4.1.1.1
dspuPuAdminNameName of the PU.rw
DisplayString
.1.3.6.1.4.1.9.9.24.1.4.1.1.2
dspuPuAdminTypePU Type is either upstream or downstream.rw
Enumeration
.1.3.6.1.4.1.9.9.24.1.4.1.1.3
dspuPuAdminRemoteMacAddressMAC address of the remote PU.rw
MacAddress -- Rsyntax OCTET STRING
.1.3.6.1.4.1.9.9.24.1.4.1.1.4
dspuPuAdminRemoteSapAddressSAP address of the remote PU.rw
INTEGER
.1.3.6.1.4.1.9.9.24.1.4.1.1.5
dspuPuAdminLocalSapAddressSAP address of the local PU.rw
INTEGER
.1.3.6.1.4.1.9.9.24.1.4.1.1.6
dspuPuAdminXidUpstream PU : XID that will be sent to the remote PU. Dnstream PU : XID that must be received from the remote PU.rw
Integer32
.1.3.6.1.4.1.9.9.24.1.4.1.1.7
dspuPuAdminXidFmtType of XID format used during activation of the link between this dspuNode and the remote PU.rw
Enumeration
.1.3.6.1.4.1.9.9.24.1.4.1.1.8
dspuPuAdminWindowSizeSend/Receive window size to be used across the link between this dspuNode and the remote PU.rw
INTEGER
.1.3.6.1.4.1.9.9.24.1.4.1.1.9
dspuPuAdminMaxIframeMaximum size of an I-frame that can be transmitted/received across the link between this dspuNode and the remote PU.rw
INTEGER
.1.3.6.1.4.1.9.9.24.1.4.1.1.10
dspuPuAdminLinkRetryCountNumber of times that the DSPU node will attempt to activate the link between the dspuNode and the remote PU.rw
INTEGER
.1.3.6.1.4.1.9.9.24.1.4.1.1.11
dspuPuAdminLinkRetryTimeoutValue (in seconds) for the delay between link activation attempts between the dspuNode and the remote PU.rw
INTEGER
.1.3.6.1.4.1.9.9.24.1.4.1.1.12
dspuPuAdminStartPuAttempt link activation with the remote PU. TRUE -> Attempt link activation with remote PU. FALSE -> Do not attempt link activation with remote PU.rw
TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- }
.1.3.6.1.4.1.9.9.24.1.4.1.1.13
dspuPuAdminDlcTypeDLC type used by the dspuNode for link activation with the remote PU.rw
Enumeration
.1.3.6.1.4.1.9.9.24.1.4.1.1.14
dspuPuAdminDlcUnitDLC unit used by the dspuNode for link activation with the remote PU.rw
INTEGER
.1.3.6.1.4.1.9.9.24.1.4.1.1.15
dspuPuAdminDlcPortDLC port used by the dspuNode for link activation with the remote PU.rw
INTEGER
.1.3.6.1.4.1.9.9.24.1.4.1.1.16
dspuPuAdminFocalPointPU serves as a focal point for alert forwarding. TRUE -> PU serves as focal point FALSE -> PU does not serve as focal point Only an upstream PU may be defined as a focal point. Downstream PUs can never be defined as a focal point; FocalPoint is always FALSE for downstream PUs. The DSPU node may define only one upstream PU as a focal point PU.rw
TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- }
.1.3.6.1.4.1.9.9.24.1.4.1.1.17
dspuPuAdminRowStatusUsed by a Management Station to create or delete the row entry in the dspuPuAdminTable following the RowStatus textual convention. Upon successful creation of the row, an Agent automatically creates a corresponding entry in the dspuPuOperTable. The Management Station can set the value to 'destroy (6)' and the Agent will then delete the rows corresponding to this PU from the dspuPuAdminTable and dspuPuOperTable.rw
RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- }
.1.3.6.1.4.1.9.9.24.1.4.1.1.18
dspuPuAdminRemoteAddressPoll address, DLCI, or subscriber address associated with the remote PU.rw
DisplayString
.1.3.6.1.4.1.9.9.24.1.4.1.1.19
dspuPuOperTableTable listing all active upstream/downstream PUs that are owned by the DSPU node (including default PUs). NOTE: In addition to the explicitly defined PUs from the dspuPuAdminTable, the dspuPuOperTable also includes default downstream PUs that may be dynamically created.
SEQUENCE OF DspuPuOperEntry
.1.3.6.1.4.1.9.9.24.1.4.2
dspuPuOperEntryEach entry represents an active upstream/downstream PU.
DspuPuOperEntry
.1.3.6.1.4.1.9.9.24.1.4.2.1
dspuPuOperIndexIndex of the PU entry in dspuPuOperTable.
Integer32
.1.3.6.1.4.1.9.9.24.1.4.2.1.1
dspuPuOperNameName of the PU.ro
DisplayString
.1.3.6.1.4.1.9.9.24.1.4.2.1.2
dspuPuOperTypePU type is either upstream or downstream.ro
Enumeration
.1.3.6.1.4.1.9.9.24.1.4.2.1.3
dspuPuOperRemoteMacAddressMAC address of the remote PU.ro
MacAddress -- Rsyntax OCTET STRING
.1.3.6.1.4.1.9.9.24.1.4.2.1.4
dspuPuOperRemoteSapAddressSAP address of the remote PU.ro
INTEGER
.1.3.6.1.4.1.9.9.24.1.4.2.1.5
dspuPuOperLocalSapAddressSAP address of the local PU.ro
INTEGER
.1.3.6.1.4.1.9.9.24.1.4.2.1.6
dspuPuOperXidUpstream PU : XID that was sent to the remote PU. Dnstream PU : XID that was received from the remote PU.ro
Integer32
.1.3.6.1.4.1.9.9.24.1.4.2.1.7
dspuPuOperXidFmtType of XID format used during activation of the link between this dspuNode and the remote PU.ro
Enumeration
.1.3.6.1.4.1.9.9.24.1.4.2.1.8
dspuPuOperWindowSizeSend/Receive window size to be used across the link between this dspuNode and the remote PU.ro
INTEGER
.1.3.6.1.4.1.9.9.24.1.4.2.1.9
dspuPuOperMaxIframeMaximum size of an I-frame that can be transmitted/received across the link between this dspuNode and the remote PU.ro
INTEGER
.1.3.6.1.4.1.9.9.24.1.4.2.1.10
dspuPuOperLinkRetryCountNumber of times that the DSPU node will attempt to activate the link between the dspuNode and the remote PU.ro
INTEGER
.1.3.6.1.4.1.9.9.24.1.4.2.1.11
dspuPuOperLinkRetryTimeoutValue (in seconds) for the delay between link activation attempts between the dspuNode and the remote PU.ro
INTEGER
.1.3.6.1.4.1.9.9.24.1.4.2.1.12
dspuPuOperStartPuAttempt link activation with the remote PU. TRUE -> Attempt link activation with remote PU. FALSE -> Do not attempt link activation with remote PU.ro
TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- }
.1.3.6.1.4.1.9.9.24.1.4.2.1.13
dspuPuOperDlcTypeDLC type used by the dspuNode for link activation with the remote PU.ro
Enumeration
.1.3.6.1.4.1.9.9.24.1.4.2.1.14
dspuPuOperDlcUnitDLC unit used by the dspuNode for link activation with the remote PU.ro
INTEGER
.1.3.6.1.4.1.9.9.24.1.4.2.1.15
dspuPuOperDlcPortDLC port used by the dspuNode for link activation with the remote PU.ro
INTEGER
.1.3.6.1.4.1.9.9.24.1.4.2.1.16
dspuPuOperFocalPointPU serves as a focal point for alert forwarding. TRUE -> PU serves as focal point FALSE -> PU does not serve as focal point Only an upstream PU may be defined as a focal point. Downstream PUs can never be defined as a focal point; FocalPoint is always FALSE for downstream PUs. The DSPU node may define only one upstream PU as a focal point PU.ro
TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- }
.1.3.6.1.4.1.9.9.24.1.4.2.1.17
dspuPuOperStateOperational state of PU is either active or inactive.ro
Enumeration
.1.3.6.1.4.1.9.9.24.1.4.2.1.18
dspuPuOperFsmStateCurrent FSM state of the PU as follows: linkReset - Link is in reset state - not connected linkPendConnOut - Pending ConnectOut to establish link linkPendConnIn - Pending ConnectIn to establish link linkPendXid - Pending XID negotiation on the link linkXidNeg - XID negotiation proceeding on link linkConnOut - ConnectOut link activation linkConnIn - ConnectIn link activation linkConnected - Link connected, PU inactive puPendAct - Link connected, PU pending activation puActive - Link connected, PU active puBusy - Link connected, PU busy puPendInact - Link connected, PU pending deactivation linkPendDisc - Pending disconnect of link linkPendClose - Pending close of link stationro
Enumeration
.1.3.6.1.4.1.9.9.24.1.4.2.1.19
dspuPuOperStartTimeTimestamp of PU activation (when ACTPU +rsp received).ro
TimeStamp -- Rsyntax TimeTicks
.1.3.6.1.4.1.9.9.24.1.4.2.1.20
dspuPuOperLastStateChgTimeTimeStamp of last PU state change between active<->inactive.ro
TimeStamp -- Rsyntax TimeTicks
.1.3.6.1.4.1.9.9.24.1.4.2.1.21
dspuPuOperRemoteAddressPoll address, DLCI, or subscriber address associated with the remote PU.ro
DisplayString
.1.3.6.1.4.1.9.9.24.1.4.2.1.22
dspuPuStatsTableTable listing the statistics recorded for each PU.
SEQUENCE OF DspuPuStatsEntry
.1.3.6.1.4.1.9.9.24.1.4.3
dspuPuStatsEntryEach entry represents an active upstream/downstream PU and has a corresponding entry in the dspuPuOperTable.
DspuPuStatsEntry
.1.3.6.1.4.1.9.9.24.1.4.3.1
dspuPuStatsSentBytesNumber of bytes sent by this PU.ro
Counter32
.1.3.6.1.4.1.9.9.24.1.4.3.1.1
dspuPuStatsRcvdBytesNumber of bytes received by this PU.ro
Counter32
.1.3.6.1.4.1.9.9.24.1.4.3.1.2
dspuPuStatsSentFramesNumber of frames sent by this PU.ro
Counter32
.1.3.6.1.4.1.9.9.24.1.4.3.1.3
dspuPuStatsRcvdFramesNumber of frames received by this PU.ro
Counter32
.1.3.6.1.4.1.9.9.24.1.4.3.1.4
dspuPuStatsSentNegativeRspsNumber of negative responses sent by this PU.ro
Counter32
.1.3.6.1.4.1.9.9.24.1.4.3.1.5
dspuPuStatsRcvdNegativeRspsNumber of negative responses received by this PU.ro
Counter32
.1.3.6.1.4.1.9.9.24.1.4.3.1.6
dspuPuStatsActiveLusNumber of active LUs on this PU (LU becomes active when ACTLU +rsp received).ro
Counter32
.1.3.6.1.4.1.9.9.24.1.4.3.1.7
dspuPuStatsInactiveLusNumber of inactive LUs on this PU (LU is inactive until ACTLU rq or ACTLU +rsp received).ro
Counter32
.1.3.6.1.4.1.9.9.24.1.4.3.1.8
dspuPuStatsBindLusNumber of LUs on this PU which are active-in-session. (LU is active-in-session when BIND rq received)ro
Counter32
.1.3.6.1.4.1.9.9.24.1.4.3.1.9
dspuPuStatsActivationFailuresNumber of activation failures for this PU.ro
Counter32
.1.3.6.1.4.1.9.9.24.1.4.3.1.10
dspuPuStatsLastActivationFailureReasonReason for last activation failure of this PU as follows: noError - No PU activation failure has been detected otherError - Undefined error detected during PU activation internalError - Internal resources error detected during PU activation configurationError - PU configuration error - PU could not be activated puNegativeResponse - Negative ACTPU response received from remote PU puAlreadyActive - PU is already activero
Enumeration
.1.3.6.1.4.1.9.9.24.1.4.3.1.11
dspuPuTraps
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.1.4.4
dspuPuTrapsPrefix
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.1.4.4.0
newdspuPuStateChangeTrapGenerated when the operational state of the PU changes between active< The following information is returned: dspuPuOperName -> PU name dspuPuOperState -> Current operational state of the PU
TRAP-TYPE
.1.3.6.1.4.1.9.9.24.1.4.4.0.1
newdspuPuActivationFailureTrapGenerated whenever a PU activation failure is detected. The following information is returned: dspuPuOperName -> PU name dspuPuOperState -> Current operational state of the PU dspuPuStatsLastActivationFailureReason -> Reason for PU activation failure
TRAP-TYPE
.1.3.6.1.4.1.9.9.24.1.4.4.0.2
dspuLu
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.1.5
dspuLuAdminTableTable listing all LUs owned by the PU. NOTE: The dspuLuAdminTable does not include LUs owned by default downstream PUs that may be dynamically created.
SEQUENCE OF DspuLuAdminEntry
.1.3.6.1.4.1.9.9.24.1.5.1
dspuLuAdminEntryEach entry represents a defined LU owned by the PU.
DspuLuAdminEntry
.1.3.6.1.4.1.9.9.24.1.5.1.1
dspuLuAdminLuLocalAddressNAU address of the local LU.
INTEGER
.1.3.6.1.4.1.9.9.24.1.5.1.1.1
dspuLuAdminTypeLU type is either pooled or dedicated.rw
Enumeration
.1.3.6.1.4.1.9.9.24.1.5.1.1.2
dspuLuAdminPoolClassNamePool class to which the LU is defined as a member. The dspuLuAdminPoolClassName is valid for pooled LUs only.rw
DisplayString
.1.3.6.1.4.1.9.9.24.1.5.1.1.3
dspuLuAdminPeerPuIndexFor downstream LUs, the PeerPuIndex identifies the upstream PU that owns the upstream LU to which this downstream LU is assigned. For upstream LUs, the PeerPuIndex identifies the downstream PU that owns the downstream LU to which this upstream LU is assigned. The PeerPuIndex is valid for dedicated LUs only; otherwise, the PeerPuIndex is zero.rw
Integer32
.1.3.6.1.4.1.9.9.24.1.5.1.1.4
dspuLuAdminPeerLuLocalAddressFor downstream LUs, the PeerLuLocalAddress identifies the NAU address of the upstream LU to which this downstream LU is assigned. For upstream LUs, the PeerLuLocalAddress identifies the NAU address of the downstream LU to which this upstream LU is assigned. The PeerLuLocalAddress is valid for dedicated LUs only; otherwise, the PeerLuLocalAddress is zero.rw
INTEGER
.1.3.6.1.4.1.9.9.24.1.5.1.1.5
dspuLuAdminRowStatusUsed by a Management Station to create or delete the row entry in the dspuLuAdminTable following the RowStatus textual convention. Upon successful creation of the row, an Agent automatically creates a corresponding entry in the dspuLuOperTable. The Management Station can set the value to 'destroy (6)' and the Agent will then delete the rows corresponding to this LU from the dspuLuAdminTable and the dspuLuOperTable.rw
RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- }
.1.3.6.1.4.1.9.9.24.1.5.1.1.6
dspuLuOperTableTable listing all LUs owned by the PU. NOTE: In addition to the LUs owned by explicitly defined PUs from the dspuLuAdminTable, the dspuLuOperTable also includes the LUs owned by default downstream PUs that may be dynamically created.
SEQUENCE OF DspuLuOperEntry
.1.3.6.1.4.1.9.9.24.1.5.2
dspuLuOperEntryEach entry represents a defined LU owned by the PU.
DspuLuOperEntry
.1.3.6.1.4.1.9.9.24.1.5.2.1
dspuLuOperLuLocalAddressNAU address of the local LU.
INTEGER
.1.3.6.1.4.1.9.9.24.1.5.2.1.1
dspuLuOperTypeLU type is either pooled or dedicated.ro
Enumeration
.1.3.6.1.4.1.9.9.24.1.5.2.1.2
dspuLuOperPoolClassNamePool class to which the LU is defined as a member. The dspuLuOperPoolClassName is valid for pooled LUs only.ro
DisplayString
.1.3.6.1.4.1.9.9.24.1.5.2.1.3
dspuLuOperPeerPuIndexFor downstream LUs, the PeerPuIndex identifies the upstream PU that owns the upstream LU to which this downstream LU is assigned. For upstream LUs, the PeerPuIndex identifies the downstream PU that owns the downstream LU to which this upstream LU is assigned. If PeerPuIndex is zero, the LU is a pooled LU and has not been assigned a peer LU from the pool.ro
Integer32
.1.3.6.1.4.1.9.9.24.1.5.2.1.4
dspuLuOperPeerLuLocalAddressFor downstream LUs, the PeerLuLocalAddress identifies the NAU address of the upstream LU to which this downstream LU is assigned. For upstream LUs, the PeerLuLocalAddress identifies the NAU address of the downstream LU to which this upstream LU is assigned. If the PeerLuLocalAddress is zero, the LU is a pooled LU and has not been assigned a peer LU from the pool.ro
INTEGER
.1.3.6.1.4.1.9.9.24.1.5.2.1.5
dspuLuOperStateOperational state of LU is either active or inactive.ro
Enumeration
.1.3.6.1.4.1.9.9.24.1.5.2.1.6
dspuLuOperFsmStateCurrent FSM state of the LU as follows: reset - neither dnLu or upLu active dnLuStarted - dnLu active, upLu inactive upLuActive - upLu active, dnLu inactive dnLuPendAct - dnLu pending activation, upLu active-unavailable dnLuActUnav - dnLu active-unavailable, upLu active-available upLuPendAvail - upLu pending-available bothAvail - both upLu and dnLu active-available dnLuPendInact - dnLu pending inactive upLuPendInact - upLu pending inactive luInactivityTimeout - inactivity Timeout on LU-to-LU session dnInactivityPendInact - dnLu pending inactive from inactivity timeoutro
Enumeration
.1.3.6.1.4.1.9.9.24.1.5.2.1.7
dspuLuOperSessionStateOperational state of LU session is either bound or unbound.ro
Enumeration
.1.3.6.1.4.1.9.9.24.1.5.2.1.8
dspuLuOperLastActivationFailureReasonReason for last activation failure of this PU as follows: noError - No LU activation failure has been detected otherError - Undefined error detected during LU activation luNegativeResponse - Negative ACTLU response received from remote LUro
Enumeration
.1.3.6.1.4.1.9.9.24.1.5.2.1.9
dspuLuTraps
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.1.5.3
dspuLuTrapsPrefix
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.1.5.3.0
newdspuLuStateChangeTrapGenerated when the operational state of the LU changes between active< The following information is returned: dspuPuOperName -> PU name dspuLuOperState -> Current operational state of the LU
TRAP-TYPE
.1.3.6.1.4.1.9.9.24.1.5.3.0.1
dspuLuActivationFailureTrapGenerated whenever an LU activation failure is detected. The following information is returned: dspuPuOperName -> PU name dspuLuOperState -> Current operational state of the LU dspuLuOperLastActivationFailureReason -> Reason for LU activation failure
TRAP-TYPE
.1.3.6.1.4.1.9.9.24.1.5.3.0.2
dspuSap
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.1.6
dspuSapTableTable listing the SAPs that are enabled for the DSPU node.
SEQUENCE OF DspuSapEntry
.1.3.6.1.4.1.9.9.24.1.6.1
dspuSapEntryEach entry represents an enabled SAP for the DSPU node.
DspuSapEntry
.1.3.6.1.4.1.9.9.24.1.6.1.1
dspuSapAddressSAP address of the local SAP.
INTEGER
.1.3.6.1.4.1.9.9.24.1.6.1.1.1
dspuSapTypeLocal SAP type is either upstreamSap or downstreamSap.rw
Enumeration
.1.3.6.1.4.1.9.9.24.1.6.1.1.2
dspuSapDlcTypeDLC type of the adapter that owns the local SAP.
Enumeration
.1.3.6.1.4.1.9.9.24.1.6.1.1.3
dspuSapDlcUnitDLC unit of the adapter that owns the local SAP.
INTEGER
.1.3.6.1.4.1.9.9.24.1.6.1.1.4
dspuSapDlcPortDLC port of the adapter that owns the local SAP.
INTEGER
.1.3.6.1.4.1.9.9.24.1.6.1.1.5
dspuSapOperStateOperational state of the local SAP as follows: - sapClosed - sapOpening - sapOpened - sapClosingro
Enumeration
.1.3.6.1.4.1.9.9.24.1.6.1.1.6
dspuSapRowStatusThis object is used by a Management Station to create or delete the row entry in the dspuSapTable following the RowStatus textual convention. The Management Station can set the value to 'destroy (6)' and the Agent will then delete the rows corresponding to this SAP from the dspuSapTable. The local SAP address is enabled on the specified adapter when a row entry in the dspuSapTable is created.rw
RowStatus -- Rsyntax INTEGER { -- active(1), -- notInService(2), -- notReady(3), -- createAndGo(4), -- createAndWait(5), -- destroy(6) -- }
.1.3.6.1.4.1.9.9.24.1.6.1.1.7
dspuSapTraps
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.1.6.2
dspuSapStateChangeTrapGenerated when the operational state of the SAP changes between 'open' or 'closed'. The following information is returned: dspuSapOperDlcType -> DLC type of the adapter on which SAP is located dspuSapOperDlcUnit -> Unit ID of the adapter on which SAP is located dspuSapOperDlcPort -> Port ID of the adapter on which SAP is located dspuSapOperAddress -> SAP address dspuSapOperState -> Current operational state of the SAP
TRAP-TYPE
.1.3.6.1.4.1.9.9.24.1.6.2.0.1
ciscoDspuMIBConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.2
ciscoDspuMIBCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.2.1
ciscoDspuMIBCompliance
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.2.1.1
ciscoDspuMIBComplianceV11R01
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.2.1.2
ciscoDspuMIBGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.2.2
dspuNodeGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.2.2.1
dspuPoolClassGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.2.2.2
dspuPooledLuGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.2.2.3
dspuPuGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.2.2.4
dspuLuGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.2.2.5
dspuSapGroup
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.2.2.6
dspuPuGroupV11R01
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.2.2.7
dspuLuGroupV11R01
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.24.2.2.8
CISCO-DSPU-MIB - SNMP MIB Reference | MIBs Explorer