CISCO-DS0BUNDLE-EXT-MIB
AI MIB Summary
The CISCO-DS0BUNDLE-EXT-MIB extends IETF DS0 Bundle management to monitor and configure time-division multiplexing (TDM) DS0 channel aggregations on Cisco routers and switches, specifically tracking bundle status, member channel states, and provisioning parameters for voice and data circuit provisioning.
The MIB module for managing DS0 Bundles.
This MIB contains additional objects to supplement the the IETF draft ds0Bundle MIB.
Main OID:
ciscoDs0BundleExtMIB.1.3.6.1.4.1.9.10.33
16
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
16 total| Object Name |
|---|
ciscoDs0BundleExtMIBThe MIB module for managing DS0 Bundles.
This MIB contains additional objects to supplement the
the IETF draft ds0Bundle MIB. MODULE-IDENTITY .1.3.6.1.4.1.9.10.33 |
ciscoDs0BundleExtMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.33.1 |
cdsx0BundleConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.33.1.1 |
cdsx0BundleExtTableThis table is used to supplement the
dsx0BundleTable. SEQUENCE OF Cdsx0BundleExtEntry .1.3.6.1.4.1.9.10.33.1.1.1 |
cdsx0BundleExtEntryContains objects to configure a ds0Bundle.
The values of objects cdsx0BundleExtDs1Index and
cdsx0BundleExtChannelMap must be specified for
the associated row to become active. Cdsx0BundleExtEntry .1.3.6.1.4.1.9.10.33.1.1.1.1 |
cdsx0BundleExtDs1IndexThe ifIndex of the DS1 line containing the ds0
timeslots in this bundle.
The ds0 bundle interface is layered on top of
the DS1 line. This layering is represented in
the ifStackTable.
This object is not instantiated until the value
is specified.
The value may be set only when the ds0 bundle
is created.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.9.10.33.1.1.1.1.1 |
cdsx0BundleExtChannelMapA list of ds0 timeslots that comprise this ds0
bundle.
This object is not instantiated until the value
is specified.
The value may be set only when the ds0 bundle is
created.rw Ds0ChannelList .1.3.6.1.4.1.9.10.33.1.1.1.1.2 |
cdsx0BundleExtEncapTypeThe type of encapsulation for this bundle.
A ds0 bundle is a logical serial port.
Setting this object defines the type of the serial
port.
If not specified, the value is none(1),
indicating that the encapsulation type on this
serial port is not defined.
If the value is changed to atmFuni(2), the
agent will create an entry in the ifTable with
ifType equal to atmFuni(106). If the value is
changed to frameRelay(3), the agent will create
an entry in the ifTable with ifType equal to
frameRelayService(44).
The new atmFuni or frameRelayService interface
is layered on top of the ds0 bundle interface.
This layering will be represented in the
ifStackTable.
The value of this object can be changed only if
the ifOperStatus of the associated atmFuni or
frameRelayService interface is down.
When the value is changed, the agent removes
all existing connections on the interface, and
also deletes the ifEntry that was created
because of the previous value.rw Enumeration .1.3.6.1.4.1.9.10.33.1.1.1.1.3 |
cdsx0BundleExtChannelRateThe data rate of each ds0 in this bundle.
rate56 - 56kb/s
rate64 - 64kb/s
For ds0's on a T1 line, the value should be
rate56(1) if 'robbed bit' signaling is used,
and rate64(2) if clear channel signaling is
used.
For ds0's on a E1 line, the value should always
be rate64(2).
The value can be set only when the entry is
created.rw Enumeration .1.3.6.1.4.1.9.10.33.1.1.1.1.4 |
cdsx0BundleInfo OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.33.1.2 |
cdsx0BundleUseTableShows the ds0 timeslots that are currently in
use (i.e., part of a ds0 bundle) on
channelized DS1 lines.
There is an entry in this table for each
channelized DS1 line which has an ifEntry. SEQUENCE OF Cdsx0BundleUseEntry .1.3.6.1.4.1.9.10.33.1.2.1 |
cdsx0BundleUseEntryContains the ds0 timeslots that are currently
part of various ds0 bundles on the DS1 line
identified by the ifIndex.
This information can be useful for an NMS when
creating new ds0 bundles on this DS1. Cdsx0BundleUseEntry .1.3.6.1.4.1.9.10.33.1.2.1.1 |
cdsx0BundleUseDs0UsedA list of ds0 timeslots on this DS1 line that
are currently in use, i.e., are part of some ds0
bundle.ro Ds0ChannelList .1.3.6.1.4.1.9.10.33.1.2.1.1.1 |
ciscoDs0BundleExtMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.33.3 |
ciscoDs0BundleExtMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.33.3.1 |
ciscoDs0BundleExtMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.33.3.2 |