CISCO-DS0-CROSS-CONNECT-MIB
AI MIB Summary
The CISCO-DS0-CROSS-CONNECT-MIB monitors and manages DS0 time-division multiplexing cross-connection states and configurations on Cisco voice gateways and routers. It provides visibility into specific DS0 channel bindings, connection status, and circuit integrity for T1/E1 digital signal interfaces.
The MIB for Ds0 cross connection.
Main OID:
ciscoDs0CrossConnectMIB.1.3.6.1.4.1.9.9.9999
14
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
14 total| Object Name |
|---|
ciscoDs0CrossConnectMIBThe MIB for Ds0 cross connection. MODULE-IDENTITY .1.3.6.1.4.1.9.9.9999 |
ciscoDs0CrossConnectMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.9999.0 |
ciscoDs0CrossConnectMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.9999.1 |
cDs0CrossConnectConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.9999.1.1 |
cds0CrossConnectConfigTableThis table is used to establish a DS0 cross connection.
A DS0 cross connect is established by binding a unique
DS0 group containing one or more DS0s of a single Ds1
interface to another unique DS0 group containing one or
more DS0s of a single DS1 interface. SEQUENCE OF Cds0CrossConnectConfigEntry .1.3.6.1.4.1.9.9.9999.1.1.1 |
cds0CrossConnectConfigEntryAn entry in cds0CrossConnectConfigTable table represents a DS0
cross connection. The two end point of the connection are:
end point 1: cds0Endpt1Ds1 cds0Endpt1Ds0Group
end point 2: cds0Endpt2Ds1 cds0Endpt2Ds0Group
The end points of this connection should be entries
of ccasGrpCfgTable and 'ccasGrpCfgServiceType' of
of the entries should be 'tdmxconn'. The ccasGrpCfgTable is
defined in CISCO-CAS-IF-MIB. Cds0CrossConnectConfigEntry .1.3.6.1.4.1.9.9.9999.1.1.1.1 |
cds0Endpt1Ds1The value of this object equals to the 'ifIndex' of a
Ds1 interface.
This Ds1 interface is used as the first end point of the
Ds0 connection. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.9.9.9999.1.1.1.1.1 |
cds0Endpt1Ds0GroupThe value of this object identifies a Ds0 group which contains
one of more Ds0(s) within the Ds1 interface represented by
'cDs0Endpt1Ds1'.
This Ds0 group is used as the first end point of the
Ds0 connection. Unsigned32 .1.3.6.1.4.1.9.9.9999.1.1.1.1.2 |
cds0Endpt2Ds1The value of this object equals to the 'ifIndex' of a
Ds1 interface.
This Ds1 interface is used as the second end point of the
Ds0 connection.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.9.9.9999.1.1.1.1.3 |
cds0Endpt2Ds0GroupThe value of this object identifies a Ds0 group which contains
one of more Ds0(s) within the Ds1 interface represented by
'cDs0Endpt2Ds1'.
This Ds0 group is used as the second end point of the
Ds0 connection.rw Unsigned32 .1.3.6.1.4.1.9.9.9999.1.1.1.1.4 |
cds0ConnRowStatusThis object is used to create or delete an entry.
The mandatory objects for creating an entry in this table:
'cds0Endpt2Ds1'
'cds0Endpt2Ds0Group'
The following objects are not allowed to be modified after
the entry to be added:
'cds0Endpt2Ds1'
'cds0Endpt2Ds0Group'rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.9999.1.1.1.1.5 |
ciscoDs0CrossConnectMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.9999.2 |
ciscoDs0CrossConnectMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.9999.2.1 |
ciscoDs0CrossConnectMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.9999.2.2 |