CISCO-DMN-DSG-TUNING-MIB
AI MIB Summary
The CISCO-DMN-DSG-TUNING-MIB provides management access to performance tuning parameters and operational statistics for Cisco Distributed Services Gateway (DSG) devices, specifically monitoring dynamic service group configurations, load balancing metrics, and traffic distribution thresholds.
Cisco DSG Tuning MIB.
Main OID:
ciscoDSGTuning.1.3.6.1.4.1.1429.2.2.5.5
166
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
166 total| Object Name |
|---|
ciscoDSGTuningCisco DSG Tuning MIB. MODULE-IDENTITY .1.3.6.1.4.1.1429.2.2.5.5 |
activeTuning OBJECT IDENTIFIER .1.3.6.1.4.1.1429.2.2.5.5.1 |
activeTuningInputSelect Input for tuning.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.1.1 |
activeTuningValidateOrbPosCommand used to validate orbital position. Set this object to yes( 2 ) to validate Orbital position.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.1.2 |
activeTuningChScanChannel Scan command. Setting scan( 1 ) triggers the channel scanning process.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.1.3 |
activeTuningTable OBJECT IDENTIFIER .1.3.6.1.4.1.1429.2.2.5.5.2 |
activeTunerTableActive Tuner Table. SEQUENCE OF ActiveTunerEntry .1.3.6.1.4.1.1429.2.2.5.5.2.1 |
activeTunerEntryEntry for Active Tuner Table. ActiveTunerEntry .1.3.6.1.4.1.1429.2.2.5.5.2.1.1 |
activeTunerIndexActive Tuner Index. Integer32 .1.3.6.1.4.1.1429.2.2.5.5.2.1.1.1 |
activeTunerRFInputActive Tuner RF Input.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.2.1.1.2 |
activeTunerFreqThe Satellite Downlink frequency in the range of 0 to 15000000 KHz in steps of 1 KHz.rw Integer32 .1.3.6.1.4.1.1429.2.2.5.5.2.1.1.3 |
activeTunerSymbolRateData rate on the transport stream in millions of symbols per second. Range is from 10000 to 450000 hectoSym/second in steps of 1 hectoSym/second. ( 1 hecto = 10^2 ).rw Integer32 .1.3.6.1.4.1.1429.2.2.5.5.2.1.1.4 |
activeTunerDVBSFECForward Error Correction Rate. For DVB-S2 modulation only auto is applicable. For DVB-S modulation all options are applicable.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.2.1.1.5 |
activeTunerModulationSignal Modulation type.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.2.1.1.6 |
activeTunerRollOffAlpha filtering - for DVB-S: 0.20/0.35, for DVB-S2: 0.20/0.25/0.35. Roll off with scaling factor of 1/100.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.2.1.1.7 |
activeTunerIQSpectrum Inversion.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.2.1.1.8 |
activeInputTableActive Input Table. SEQUENCE OF ActiveInputEntry .1.3.6.1.4.1.1429.2.2.5.5.2.2 |
activeInputEntryEntry for Active Input Table. ActiveInputEntry .1.3.6.1.4.1.1429.2.2.5.5.2.2.1 |
activeInputRFIndexSelection of RF Input. Enumeration .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.1 |
activeInputLNBTypeLNB Type: C-Band/Single Ku/Dual Ku/Advanced. For simplified setup select C-Band or Ku-Band. If there is a need to configure LO, select Advanced.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.2 |
activeInputLNBTrimLow Noise Block Trim Level 1 when type is not advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz.rw Integer32 .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.3 |
activeInputLNBTrim2Low Noise Block Trim Level 2 when type is not advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz.rw Integer32 .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.4 |
activeInputLocalOscFreq1RW, only when LNB Type is Advanced. Local Oscillator #1 Frequency when type is advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz.rw Integer32 .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.5 |
activeInputLocalOscFreq2RW, only when LNB Type is Advanced. Local Oscillator #2 Frequency when type is advanced. It has a range of 0 to 15000000 KHz in steps of 1KHz.rw Integer32 .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.6 |
activeInputCrossOverCrossover Frequency for Local Oscillator. It has a range of 0 to 15000000 KHz in steps of 1KHz.rw Integer32 .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.7 |
activeInputLocalOscControl22KHz Local Osillator Control.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.8 |
activeInputOrbitalPosOrbital location Azimuth.The range is from 0 to 3600 in steps of 1. The scaling factor is 1/10th of a degree.rw Integer32 .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.9 |
activeInputEastWestFlagRF Mapping Location East/West Flag.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.10 |
activeInputPolarizationRF Mapping Polarization.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.11 |
activeInputSatNameSatellite Name Matching the Orbital Position + E/W Flag. Enter Satellite/Transponder Name to fill in Azimuth and E/W Flag automatically.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.12 |
activeInputLastLNBConfigLNB configuration last applied.rw Integer32 .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.13 |
activeInputDiSeqCEnableDiSeqC On/Off.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.14 |
activeInputDiSeqCSwitchDiSeqC switch selection.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.2.2.1.15 |
lnbPowerTableLNB power Table. SEQUENCE OF LnbPowerEntry .1.3.6.1.4.1.1429.2.2.5.5.2.3 |
lnbPowerEntryEntry for LNB power Table. LnbPowerEntry .1.3.6.1.4.1.1429.2.2.5.5.2.3.1 |
lnbPowerIndexLow Noise Block Power Index. Integer32 .1.3.6.1.4.1.1429.2.2.5.5.2.3.1.1 |
lnbPowerInputLow Noise Block Power Input.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.2.3.1.2 |
lnbPowerControlActive LNB Power setting.13/18V is to control dual polarity LNB. The convention is: Horizontal-18V; Vertical-13V. Valid settings are, Off 13V ( 13V always, ignore polarity in NIT ) 18V ( 18V always, ignore polarity in NIT ) 13V-NIT ( 13V initially, over-ride by polarity in NIT ) 18V-NIT ( 18V initially, over-ride by polarity in NIT ).rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.2.3.1.3 |
lnbPowerStatusLow Noise Block Power Supply Status.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.2.3.1.4 |
tuningStatusTable OBJECT IDENTIFIER .1.3.6.1.4.1.1429.2.2.5.5.3 |
satSignalTableSatellite Signal Table. SEQUENCE OF SatSignalEntry .1.3.6.1.4.1.1429.2.2.5.5.3.1 |
satSignalEntryEntry for Satellite Signal Table. SatSignalEntry .1.3.6.1.4.1.1429.2.2.5.5.3.1.1 |
satSignalIndexSatellite Signal Table Index. Integer32 .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.1 |
satSignalPvBerStatus: DVB-S Post-Viterbi Bit Error Rate.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.2 |
satSignalQPSKBerStatus: Quadrature phase-shift keying ( QPSK ) Bit error rate.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.3 |
satSignalLdpCberStatus: DVB-S2 Low Density Parity Check Bit Error Rate.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.4 |
satSignalCndispStatus: Carrier to Noise Ratio.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.5 |
satSignalCnMarginStatus: Carrier to Noise Ratio Link Margin.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.6 |
satSignalLevelStatus: Signal Level.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.7 |
satSignalSatDishCnMarginStatus: SatDish CN Margin in dB Displays the margin in dB to a threshold level at which failure occurs. The range is 0dB to 10dB.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.8 |
satSignalSatDishSigLevelStatus: SatDish Signal level( in dBm ) plus some kind of graphical signal level meter on the LCD (the range is -75 dBm to +-20 dBm).ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.9 |
satSignalPerDispStatus: DVB-S2 Packet Error Rate.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.10 |
satSignalAfcStatus: Tuner Frequency Offset. The range is from -51.0 to 51.0 in steps of 0.1 MHz.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.11 |
satSignalUncorErrCntStatus: Uncorrected Error Counter. The range is from 0 to 4294967295.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.12 |
satSignalCorErrCntStatus: DVB-S Reed-Solomon Corrected Error Counter.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.13 |
satSignalRfLockStatus: RF Lock Status.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.14 |
satSignalDnLkFreqStatus: Downlink Frequency in the range of 0.000000 to 15.000000 GHz in steps of 0.000001 GHz.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.15 |
satSignalLbandFreqStatus: L-Band Frequency in the range of 950.000 to 2150.000 MHz in steps of 0.001 MHz.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.16 |
satSignalSymbolRateStatus: Symbol Rate in the Range of 1.0000 to 45.0000 MegaSym/second in steps of 0.0001 MegaSym/second.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.17 |
satSignalFecRateStatus: Forward Error Correction Rate.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.18 |
satSignalPolarizationStatus: Signal Polarization.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.19 |
satSignalModulationStatus: Signal Modulation Type.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.20 |
satSignalIQStatus: Spectrum Inversion.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.21 |
satSignalLnbPsStatusStatus: Low Noise Block Power Supply Status.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.22 |
satSignalPilotsStatus: Presence of Pilot Symbols.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.23 |
satSignalLoSelectStatus: LO Select.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.24 |
satSignalPolarStatus: Polarization.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.25 |
satSignalClearSigErrCntSet this variable to yes( 2 ) to clear signal error counter.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.26 |
satSignalValidateOrbPosDateStatus: Last Orbital Position Validate Date.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.27 |
satSignalValidateOrbPosStatStatus: Orbital Position Validation Status.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.28 |
satSignalChScanStatusChannel Scanning Status :Off/Scanning/Done.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.29 |
satSignalSigLevelRawSignal Level - RAW Register Value.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.30 |
satSignalP1DStatusP1 DSTATUS.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.31 |
satSignalDvbS2FrameLenDVB-S2 Frame Length.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.32 |
satSignalCnMarginRawC/N Margin - RAW Register Value.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.33 |
satSignalDvbSQpskErrCountDVB-S QPSK Error Count.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.34 |
satSignalDvbS2LdpcErrCountDVB-S2 LPDC Error Count.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.35 |
satSignalPvErrCountDVB-S PV Error Count.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.36 |
satSignalFecSyncStatusFEC SYNC Status for DVB-S PV Decoder.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.37 |
satSignalPktErrCountDVB-S/DVB-S2 Packet Error Count.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.1.1.38 |
inputStatusTableInput Status Table. SEQUENCE OF InputStatusEntry .1.3.6.1.4.1.1429.2.2.5.5.3.2 |
inputStatusEntryEntry for Input Status Table. InputStatusEntry .1.3.6.1.4.1.1429.2.2.5.5.3.2.1 |
inputStatusIndexStatus: Index for inputStatus Table. Integer32 .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.1 |
inputStatusCurInputStatus: Current Input for D9865 only.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.2 |
inputStatusSatLockStatus: Satellite Lock: No Lock/Lock+Sig/Lock-Sig.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.3 |
inputStatusMpgIpLockSignal Validity.MPEG over IP Lock.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.4 |
inputStatusInputRateStatus: Input Rate in Mega bauds per second ( Mbps ). The range is from 0.000000 to 4294.967295 Mbps in steps of 0.000001 Mbps.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.5 |
inputStatusNetworkNameStatus: Network Name.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.6 |
inputStatusNetworkIdStatus: Network ID.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.7 |
inputStatusTransportIdStatus: Transport ID.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.8 |
inputStatusScramblingModeStatus: Scrambling mode.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.9 |
inputStatusTransportErrorStatus: Transport Error.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.10 |
inputStatusAsiLockStatus: ASI Lock.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.11 |
inputStatusAsiLinkErrorStatus: ASI Link Error.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.12 |
inputStatusAsiPacketSizeStatus: ASI Packet Size.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.13 |
inputStatusLastTuneReasonStatus: Reason for the last tune.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.14 |
inputStatusCurD985xInputStatus: Current Input for all IRD models.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.15 |
inputStatusIpiLinkStatusStatus: IPI Ethernet Link Status.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.16 |
inputStatusIpiSignalStatus: IPI Signal Encapsulation Lock Status.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.17 |
inputStatusIpiFecLockStatus: FEC Lock Status.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.18 |
inputStatusIpiPcrLockStatus: Indicates if PCR is received without errors or not.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.19 |
inputStatusIpiDelLatencyStatus: Dejitter Buffer Latency.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.20 |
inputStatusIpiData1SrcIPStatus: DATA1 Source IP Selected.ro IpAddress .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.21 |
inputStatusIpiData2SrcIPStatus: DATA2 Source IP Selected.ro IpAddress .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.22 |
inputStatusIpiData1TsTypeStatus: DATA1 Source Transport Type.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.23 |
inputStatusIpiData2TsTypeStatus: DATA2 Source Transport Type.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.3.2.1.24 |
siRcvTable OBJECT IDENTIFIER .1.3.6.1.4.1.1429.2.2.5.5.4 |
siRcvOptionTableRcv Option Table. SEQUENCE OF SiRcvOptionEntry .1.3.6.1.4.1.1429.2.2.5.5.4.1 |
siRcvOptionEntryEntry for Rcv Option Table. SiRcvOptionEntry .1.3.6.1.4.1.1429.2.2.5.5.4.1.1 |
siRcvOptionInstanceInstance for siRcvOptionTable. Integer32 .1.3.6.1.4.1.1429.2.2.5.5.4.1.1.1 |
siRcvOptionAcqModeCustom Tuning Mode: Acquisition Mode.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.1.1.2 |
siRcvOptionReacqSet this variable to yes( 2 ) to reacquire signal.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.1.1.3 |
siRcvOptionNetIDNetwork ID.rw Integer32 .1.3.6.1.4.1.1429.2.2.5.5.4.1.1.4 |
siRcvOptionInputSelUserCfg locks to RF input set by the user and SW Map uses Orbital Position settings to select RF input. It is recommended to set Validate Orbital Position to 'Yes' for SW Mapped option.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.1.1.5 |
siRcvOptionFreqSelCustom Tuning Mode: Frequency Tuning Mode: NIT/Preset.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.1.1.6 |
siRcvOptionServListModeCustom Tuning Mode: Service List Mode: Rigorous/Degraded.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.1.1.7 |
siRcvOptionUseBATCustom Tuning Mode:Bouquet Association Table in Service List.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.1.1.8 |
siRcvOptionUseNITCustom Tuning Mode:Network Information Table in Service List.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.1.1.9 |
siRcvOptionUseSDTCustom Tuning Mode:Service Description Table in Service List.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.1.1.10 |
siRcvOptionUsePATCustom Tuning Mode:Program Association Table in Service List.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.1.1.11 |
siRcvOptionStatusTableRcv Option Status Table. SEQUENCE OF SiRcvOptionStatusEntry .1.3.6.1.4.1.1429.2.2.5.5.4.2 |
siRcvOptionStatusEntryEntry for Rcv Option Status Table. SiRcvOptionStatusEntry .1.3.6.1.4.1.1429.2.2.5.5.4.2.1 |
siRcvOptionStatusInstanceInstance of siRcv Option Status Table. Integer32 .1.3.6.1.4.1.1429.2.2.5.5.4.2.1.1 |
siRcvOptionLastChanReasSource of the last tuning.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.2.1.2 |
siRcvOptionLastActivatedLast Preset Activated number.The range is from 0 to 64.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.4.2.1.3 |
siRcvOptionStatusFreqSelStatus of Frequency tuning mode.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.2.1.4 |
siRcvOptionStatusServListModeStatus of Service list mode.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.2.1.5 |
siRcvOptionStatusUseBATStatus of Bouquet Association Table in Service List.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.2.1.6 |
siRcvOptionStatusUseNITStatus of Network Information Table in Service List.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.2.1.7 |
siRcvOptionStatusUseSDTStatus of Service Description Table in Service List.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.2.1.8 |
siRcvOptionStatusUsePATStatus of Program Association Table in Service List.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.2.1.9 |
siInfoRxTableService information Receive table. SEQUENCE OF SiInfoRxEntry .1.3.6.1.4.1.1429.2.2.5.5.4.3 |
siInfoRxEntryEntry for Service Information Received. SiInfoRxEntry .1.3.6.1.4.1.1429.2.2.5.5.4.3.1 |
siInfoRxInstanceInstance of SI Info Receive table. Integer32 .1.3.6.1.4.1.1429.2.2.5.5.4.3.1.1 |
siInfoRxIdxService Information Receive Table Index. Integer32 .1.3.6.1.4.1.1429.2.2.5.5.4.3.1.2 |
siInfoRxTypeService Information Receive Table Type.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.3.1.3 |
siInfoRxIDExtService Information Receive Table ID Extension. The range is from 0 to 4294967295.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.4.3.1.4 |
siInfoRxUidService Information Receive Unique ID. The range is from 1 to 32.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.4.3.1.5 |
siInfoRxStatusService Information Receive Status.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.3.1.6 |
siInfoRxVerService Information Version. The range is from 0 to 4294967295.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.4.3.1.7 |
siInfoRxPIDService Information Program ID. The range is from 0 to 8192.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.4.3.1.8 |
siInfoRxSectionsService Information Number of Sections. The range is from 0 to 4294967295.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.4.3.1.9 |
siInfoTsTableTransport Stream table. SEQUENCE OF SiInfoTsEntry .1.3.6.1.4.1.1429.2.2.5.5.4.4 |
siInfoTsEntryEntry for Transport stream table. SiInfoTsEntry .1.3.6.1.4.1.1429.2.2.5.5.4.4.1 |
siInfoTsInstanceTransport Stream Table Instance. Integer32 .1.3.6.1.4.1.1429.2.2.5.5.4.4.1.1 |
siInfoTsIdxService Information Transport Stream Index. Integer32 .1.3.6.1.4.1.1429.2.2.5.5.4.4.1.2 |
siInfoTsIdFrequency Plan: Service Information Transport Stream ID. The range is from 0 to 4294967295.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.4.4.1.3 |
siInfoTsFreqFrequency Plan: Service Information Frequency The range is from 0.000000 to 15.000000 GHz in steps of 0.000001 GHz.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.4.4.1.4 |
siInfoTsSymRateFrequency Plan: Service Information Symbol Rate. The range is from 1.0000 to 45.0000 Megasym/second in steps of 0.0001 Megasym.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.4.4.1.5 |
siInfoTsOrbPosnFrequency Plan: Service Information Orbital Position. The range is from 0.0 to 360.0 .ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.4.4.1.6 |
siInfoTsPolarFrequency Plan: Service Information Polarization.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.4.1.7 |
siInfoTsFECFrequency Plan: Service Information Forward Error Correction Rate.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.4.1.8 |
siInfoTsModulationFrequency Plan: Service Information Modulation.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.4.1.9 |
siInfoTsOrgNetIDFrequency Plan: Service Information Original Network ID. The range is from 0 to 4294967295.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.4.4.1.10 |
siInfoTsEastWestFlagFrequency Plan: Service Information East West flag.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.4.1.11 |
siInfoVCInfoTableVC table. SEQUENCE OF SiInfoVCInfoEntry .1.3.6.1.4.1.1429.2.2.5.5.4.5 |
siInfoVCInfoEntryEntry for VC information. SiInfoVCInfoEntry .1.3.6.1.4.1.1429.2.2.5.5.4.5.1 |
siInfoVCInfoInstanceVirtual Channel Info table Instance. Integer32 .1.3.6.1.4.1.1429.2.2.5.5.4.5.1.1 |
siInfoVCInfoIdxVirtual Channel Info table Index. Integer32 .1.3.6.1.4.1.1429.2.2.5.5.4.5.1.2 |
siInfoVCInfoIdService Information VC Service ID. The range is from 0 to 4294967295.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.4.5.1.3 |
siInfoVCInfoTxIDService Information VC Transport Stream ID. The range is from 0 to 4294967295.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.4.5.1.4 |
siInfoVCInfoProgNameService Information VC Programme Name.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.4.5.1.5 |
siInfoVCInfoPMTPIDService Information VC Program Map Table Program ID.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.4.5.1.6 |
siInfoVCInfoCHTypeService Type:TV service/ Radio service.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.5.1.7 |
siInfoVCInfoECMPIDService Information VC Entitlement Control Message Program ID.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.5.4.5.1.8 |
siInfoVCInfoAuthorizedService List: Channel Authorized: Yes/No.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.5.4.5.1.9 |