CISCO-DMN-DSG-MPE-MIB
AI MIB Summary
The CISCO-DMN-DSG-MPE-MIB monitors Multi-Protocol Encapsulation (MPE) session states, tunnel interfaces, and protocol-specific statistics on Cisco DSG (Data Services Gateway) platforms. It provides granular visibility into MPE tunnel establishment, traffic flow counters, and error conditions for multi-protocol transport services.
Cisco DSG MPE (Multi Protocol Encapsulation) MIB.
Main OID:
ciscoDSGMPE.1.3.6.1.4.1.1429.2.2.5.26
29
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
29 total| Object Name |
|---|
ciscoDSGMPECisco DSG MPE (Multi Protocol Encapsulation) MIB. MODULE-IDENTITY .1.3.6.1.4.1.1429.2.2.5.26 |
mpeTable OBJECT IDENTIFIER .1.3.6.1.4.1.1429.2.2.5.26.2 |
mpeConfigTableMPE cofiguraton table. SEQUENCE OF MpeConfigEntry .1.3.6.1.4.1.1429.2.2.5.26.2.1 |
mpeConfigEntryEntry for MPE Config Table. MpeConfigEntry .1.3.6.1.4.1.1429.2.2.5.26.2.1.1 |
mpeConfigPortIDEthernet port ID.Index for MPE Configuration table. Integer32 .1.3.6.1.4.1.1429.2.2.5.26.2.1.1.1 |
mpeConfigForwardingMPECFG forwarding Mode.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.26.2.1.1.2 |
mpeConfigIGMPMPECFG IGMP support.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.26.2.1.1.3 |
mpeConfigRIPMPECFG RIP support.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.26.2.1.1.4 |
mpeMultipacketMultipacket Control.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.26.2.1.1.5 |
unicastTableUnicast Table. SEQUENCE OF UnicastEntry .1.3.6.1.4.1.1429.2.2.5.26.2.2 |
unicastEntryEntry for Unicast Table. UnicastEntry .1.3.6.1.4.1.1429.2.2.5.26.2.2.1 |
unicastIdxIndex for Unicast Table. Integer32 .1.3.6.1.4.1.1429.2.2.5.26.2.2.1.1 |
unicastRouteDestination IP adddress to which the data is to be forwarded. Format: ###.###.###.###, Range of ### is 0 to 255.rw IpAddress .1.3.6.1.4.1.1429.2.2.5.26.2.2.1.2 |
unicastMaskIP Mask for Destination IP address.rw Integer32 .1.3.6.1.4.1.1429.2.2.5.26.2.2.1.3 |
unicastOutputPortIDUnicast Output port ID.rw Integer32 .1.3.6.1.4.1.1429.2.2.5.26.2.2.1.4 |
unicastGatewayAddrUnicast Gateway Address. Format: ###.###.###.###, Range of ### is 0 to 255.rw IpAddress .1.3.6.1.4.1.1429.2.2.5.26.2.2.1.5 |
unicastRowStatusMPECFG:UnicastRowStatus.Used to add or delete rows in unicast table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1429.2.2.5.26.2.2.1.6 |
staticMulticastTableStatic Multicast Table. SEQUENCE OF StaticMulticastEntry .1.3.6.1.4.1.1429.2.2.5.26.2.3 |
staticMulticastEntryEntry for Static Multicast Table. StaticMulticastEntry .1.3.6.1.4.1.1429.2.2.5.26.2.3.1 |
staticMulticastIdxIndex for Static Multicast Table. Integer32 .1.3.6.1.4.1.1429.2.2.5.26.2.3.1.1 |
staticMulticastGroupAddressStatic Multicast group address. The allowed range is from 224.0.0.0 to 239.255.255.255.rw IpAddress .1.3.6.1.4.1.1429.2.2.5.26.2.3.1.2 |
staticMulticastRowstatusStatic Multicast table row status. Used to add or delete rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1429.2.2.5.26.2.3.1.3 |
mpeMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1429.2.2.5.26.3 |
mpeMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1429.2.2.5.26.3.1 |
mpeComplianceThe compliance statement for SNMP entities which implement the MPE mib. Unknown .1.3.6.1.4.1.1429.2.2.5.26.3.1.1 |
mpeMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1429.2.2.5.26.3.2 |
mpeConfigGroupA collection of objects for MPE configuration. Unknown .1.3.6.1.4.1.1429.2.2.5.26.3.2.1 |
unicastGroupA collection of objects for Unicast table. Unknown .1.3.6.1.4.1.1429.2.2.5.26.3.2.2 |
staticMulticastGroupA collection of objects for Static Multicast table. Unknown .1.3.6.1.4.1.1429.2.2.5.26.3.2.3 |