CISCO-DMN-DSG-MOIP-MIB
AI MIB Summary
The CISCO-DMN-DSG-MOIP-MIB module provides management interfaces for Cisco MOIP (Media Over IP) devices, specifically monitoring session states, call quality metrics, and protocol-specific counters for voice traffic over IP networks. It enables the tracking of MOIP endpoint registration, call setup failures, and media stream statistics to support troubleshooting of voice-over-IP infrastructure.
Cisco MOIP MIB.
Main OID:
ciscoDSGMOIP.1.3.6.1.4.1.1429.2.2.5.35
44
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
44 total| Object Name |
|---|
ciscoDSGMOIPCisco MOIP MIB. MODULE-IDENTITY .1.3.6.1.4.1.1429.2.2.5.35 |
moipIPOTable OBJECT IDENTIFIER .1.3.6.1.4.1.1429.2.2.5.35.1 |
moipIPOConfigTableMOIP IP Output Table. SEQUENCE OF MOIPIPOConfigEntry .1.3.6.1.4.1.1429.2.2.5.35.1.1 |
moipIPOConfigEntryEntry for DPM Aligned PMT table. MOIPIPOConfigEntry .1.3.6.1.4.1.1429.2.2.5.35.1.1.1 |
moipIPOConfigIDMPEG Over IP Output Instance ID .ro Integer32 .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.1 |
moipIPOConfigOutputEnabledMPEG Over IP Output is enabled.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.2 |
moipIPOConfigInstanceNameMPEG Over IP Output Name.rw DisplayString .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.3 |
moipIPOConfigTPProtocolTransport Protocol to be used: UDP/ RPT.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.4 |
moipIPOConfigIPVerInternet Protocol version of the destination IP address:IPv4/IPv6.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.5 |
moipIPOConfigDestIPAddrMPEG Over IP Destination IP Address.rw IpAddress .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.6 |
moipIPOConfigSAPMulticastIPAddrMPEG Over IP Destination IP Address.rw IpAddress .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.7 |
moipIPOConfigDestPortSource UDP Port - 0 allows automatic Port Selection, enter a value to override..rw Integer32 .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.8 |
moipIPOConfigSrcPortSource UDP Port - 0 allows automatic Port Selection, enter a value to override..rw Integer32 .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.9 |
moipIPOConfigMinIPPerSecMinimum Number of IP Packets to be sent per second.rw Integer32 .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.10 |
moipIPOConfigPCRAdditionProgram Clock Reference Addition. This OID is read only on D9824, D9854-i and D9859rw Enumeration .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.11 |
moipIPOConfigPCRStartNewPktEnabling new Ethernet Packet when new Program Clock Reference arrives.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.12 |
moipIPOConfigSendSAPSend SAP Messages.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.13 |
moipIPOConfigUseSAPStrUser Configured SAP String or PE1 SDT Channel name as the Transport Name in the SAP.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.14 |
moipIPOConfigMaxTransPktPerIPMaximum Number of Transport Packets per IP Packet.rw Integer32 .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.15 |
moipIPOConfigSAPStrUser configured Session Announcement Protocol Transport Name to be used when DPMIPOConfigUseSAPStr is set to 'YES'.rw DisplayString .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.16 |
moipIPOConfigInterfaceModeMPEG Over IP Output port selection.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.17 |
moipIPOConfigBitRateMaxmum ASI output rate in Mbps with scaling factor of 6.rw Integer32 .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.18 |
moipIPOConfigTOSTOS field in IP header. This is an 8 bits field divided into 5 sub-fields namely Precedence, D, T, R and Unused.rw Integer32 .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.19 |
moipIPOConfigTTLTime to live. This is an 8 bits fiels that defines how many hops an IP datagram can travel through.rw Integer32 .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.20 |
moipIPOConfigSAPDestPortSAP Destination Port Number.rw Integer32 .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.21 |
moipIPOFECModeFEC Mode.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.22 |
moipIPOFECColDepthFEC Column Depth (L Value).rw Integer32 .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.23 |
moipIPOFECRowWidthFEC Row Width (D Value).rw Integer32 .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.24 |
moipIPOAnnexTypeFEC arrangement : Non block-aligned (Annex A in Pro-MPEG FEC, Annex B in SMPTE 2022), Block-aligned (Annex B in Pro-MPEG FEC, Annex C in SMPTE-2022).rw Enumeration .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.25 |
moipIPOFEC1UDPPortUDP Port for FEC Columns Stream in step of 2.rw Integer32 .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.26 |
moipIPOFEC2UDPPortUDP Port for FEC Rows Stream in step of 2.rw Integer32 .1.3.6.1.4.1.1429.2.2.5.35.1.1.1.27 |
moipIPOStreamStatusTableMOIP IP Output Table. SEQUENCE OF MOIPIPOStreamStatusEntry .1.3.6.1.4.1.1429.2.2.5.35.1.2 |
moipIPOStreamStatusEntryEntry for DPM Aligned PMT table. MOIPIPOStreamStatusEntry .1.3.6.1.4.1.1429.2.2.5.35.1.2.1 |
moipIPOStreamStatusIDMPEG Over IP Output Instance ID .ro Integer32 .1.3.6.1.4.1.1429.2.2.5.35.1.2.1.1 |
moipIPOStreamStatusIntf1Stream Status, Ethernet Port 1.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.35.1.2.1.2 |
moipIPOStreamStatusIntf2Stream Status, Ethernet Port 2.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.35.1.2.1.3 |
moipIPOStreamStatusContentOvflContent Overflow.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.35.1.2.1.4 |
moipIPOStreamStatusLinkOvflLink Overflow.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.35.1.2.1.5 |
moipIPOInfo OBJECT IDENTIFIER .1.3.6.1.4.1.1429.2.2.5.35.2 |
moipIPOStatsHWGlobalErrorCritical MPEG over IP Engine Failure.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.35.2.1 |
moipIPOStatsStreamErrorMPEG over IP TS Overflow.ro Enumeration .1.3.6.1.4.1.1429.2.2.5.35.2.2 |
moipIPOStatsBandwidthConfCombined User Rate (Mbps).ro DisplayString .1.3.6.1.4.1.1429.2.2.5.35.2.3 |
moipIPOStatsBandwidthActIntf1Actual Rate (Mbps), Ethernet Port 1.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.35.2.4 |
moipIPOStatsBandwidthActIntf2Actual Rate (Mbps), Ethernet Port 2.ro DisplayString .1.3.6.1.4.1.1429.2.2.5.35.2.5 |