CISCO-DMN-DSG-DR-MIB
AI MIB Summary
The CISCO-DMN-DSG-DR-MIB module provides SNMP access to monitor and manage the state, configuration, and performance metrics of Cisco Dynamic Resource (DR) components within the Cisco Data Center Network Manager (DCNM) Distributed Services Gateway architecture. It exposes specific counters and status indicators for DR instances, including operational states, resource allocation statistics, and interface utilization relevant to the distributed gateway fabric.
Cisco generic DR MIB.
Main OID:
ciscoDSGDR.1.3.6.1.4.1.1429.2.2.5.43
31
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
31 total| Object Name |
|---|
ciscoDSGDRCisco generic DR MIB. MODULE-IDENTITY .1.3.6.1.4.1.1429.2.2.5.43 |
IMPORTSCisco generic DR MIB. Unknown .1.3.6.1.4.1.1429.2.2.5.43 |
drGlobalCfg OBJECT IDENTIFIER .1.3.6.1.4.1.1429.2.2.5.43.1 |
enableDisable/Enable Disaster Recovery Featurerw Enumeration .1.3.6.1.4.1.1429.2.2.5.43.1.1 |
sigLockTimeSignal Lock timer (In Seconds)rw INTEGER .1.3.6.1.4.1.1429.2.2.5.43.1.2 |
sigLossTimeSignal Loss timer (In Seconds)rw INTEGER .1.3.6.1.4.1.1429.2.2.5.43.1.3 |
verifyTimerVerify timer (In Seconds)rw INTEGER .1.3.6.1.4.1.1429.2.2.5.43.1.4 |
profileLocal/Uplink Disaster Recovery Profilerw Enumeration .1.3.6.1.4.1.1429.2.2.5.43.1.5 |
backupTransportTableDR BackupTransport Configuration Table. SEQUENCE OF BackupTransportEntry .1.3.6.1.4.1.1429.2.2.5.43.2 |
backupTransportEntryEntry for Disaster Recovery BackupTransport Configuration. BackupTransportEntry .1.3.6.1.4.1.1429.2.2.5.43.2.1 |
backupTransportIndexDR CSI record indexro Integer32 .1.3.6.1.4.1.1429.2.2.5.43.2.1.1 |
backupTransportSetIdxDR CSI Idx.rw Integer32 .1.3.6.1.4.1.1429.2.2.5.43.2.1.2 |
backupTransportDvbsFecDR DVBS Forward Error Correction: Forward Error Correction Rate.
For DVB-S2 modulation only auto is applicable.
For DVB-S modulation all options are applicable.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.43.2.1.3 |
backupTransportEwFlagDR E/W Flagrw Enumeration .1.3.6.1.4.1.1429.2.2.5.43.2.1.4 |
backupTransportFrequencyDR Frequency: The Satellite Downlink frequency in the range of
0 to 15000000 KHz in steps of 1 KHz..rw Integer32 .1.3.6.1.4.1.1429.2.2.5.43.2.1.5 |
backupTransportRFInputDR Input: Select Input for tuningrw Enumeration .1.3.6.1.4.1.1429.2.2.5.43.2.1.6 |
backupTransportModSysDR Modulation System.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.43.2.1.7 |
backupTransportNetIdNetwork Id.rw Integer32 .1.3.6.1.4.1.1429.2.2.5.43.2.1.8 |
backupTransportOrbitalPosDR Orbital Positionrw Integer32 .1.3.6.1.4.1.1429.2.2.5.43.2.1.9 |
backupTransportOrbpolarizationOrbital location Azimuth.The range is from 0 to 3600 in steps of 1. The scaling factor is 1 10th of a degreerw Integer32 .1.3.6.1.4.1.1429.2.2.5.43.2.1.10 |
backupTransportSymbRateData rate on the transport stream in millions of symbols per second. Range is from 10000 to 450000 hectoSym/second in steps of 1 hectoSym/second. ( 1 hecto = 10^2 ).rw Integer32 .1.3.6.1.4.1.1429.2.2.5.43.2.1.11 |
backupTransportRollOffFactorDR Rollof Factor:Alpha filtering - for DVB-S: 0.20/0.35, for DVB-S2: 0.20/0.25/0.35. Roll off with scaling factor of 1/100.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.43.2.1.12 |
backupTransportRowstatusRowStatus.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.43.2.1.13 |
backupSetTableDR BackupSet Configuration Table. SEQUENCE OF BackupSetEntry .1.3.6.1.4.1.1429.2.2.5.43.3 |
backupSetEntryEntry for Disaster Recovery BackupSet Configuration. BackupSetEntry .1.3.6.1.4.1.1429.2.2.5.43.3.1 |
backupSetPeidBackupSet PEIdro Integer32 .1.3.6.1.4.1.1429.2.2.5.43.3.1.1 |
backupSetRecidBackup Set Record Indexro Integer32 .1.3.6.1.4.1.1429.2.2.5.43.3.1.2 |
backupSetCsiidxCSI Index.ro Integer32 .1.3.6.1.4.1.1429.2.2.5.43.3.1.3 |
backupSetBkpchBackup Channel.rw Integer32 .1.3.6.1.4.1.1429.2.2.5.43.3.1.4 |
backupSetBkpchDispTextBackup Channel Display Textro DisplayString .1.3.6.1.4.1.1429.2.2.5.43.3.1.5 |
backupSetRowStatusBackup Row Status.rw Enumeration .1.3.6.1.4.1.1429.2.2.5.43.3.1.6 |