CISCO-DIAMETER-SG-MIB
AI MIB Summary
The CISCO-DIAMETER-SG-MIB enables SNMP-based monitoring and configuration of Cisco Diameter Server Group entities, specifically tracking session states, server reachability, and load balancing parameters for Diameter protocol signaling. This module facilitates the retrieval of operational metrics and the application of configuration changes to manage Diameter server group behavior within Cisco network infrastructure.
The MIB module for Cisco's Diameter Server Group Entities. This MIB describes the SNMP MIB objects that are supported in order to provide the ability to fetch/configure the Diameter Server Groups.
Main OID:
ciscoDiameterSGMIB.1.3.6.1.4.1.9.10.132
19
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
19 total| Object Name |
|---|
ciscoDiameterSGMIBThe MIB module for Cisco's Diameter Server Group
Entities. This MIB describes the SNMP MIB objects
that are supported in order to provide the ability
to fetch/configure the Diameter Server Groups. MODULE-IDENTITY .1.3.6.1.4.1.9.10.132 |
ciscoDiameterSGMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.132.0 |
ciscoDiameterSGMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.132.1 |
cdsgHostCfgs OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.132.1.1 |
cdsgServerGroupTableThe table listing the Diameter server group information.
Entries are added to this table via cdsgServerGroupRowStatus in
accordance with the RowStatus convention. SEQUENCE OF CdsgServerGroupEntry .1.3.6.1.4.1.9.10.132.1.1.1 |
cdsgServerGroupEntryA row entry representing a Diameter server group entry. CdsgServerGroupEntry .1.3.6.1.4.1.9.10.132.1.1.1.1 |
cdsgServerGroupIndexA number uniquely identifying each Diameter
Server Group. An index that uniquely represents
a Server Group. This index is assigned arbitrarily
by the SNMP engine and is not saved over reloads. Unsigned32 (1..4294967295 ) .1.3.6.1.4.1.9.10.132.1.1.1.1.1 |
cdsgServerGroupNameThe Server Group Name.
It has to be unique and not an empty string.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.10.132.1.1.1.1.2 |
cdsgServerGroupStorageTypeThe storage type for this conceptual row. An agent
implementing the table must allow adding cdsgServerGroupName
into the table. None of the columnar objects is writable
when the conceptual row is permanent.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.9.10.132.1.1.1.1.3 |
cdsgServerGroupRowStatusThe status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the cdsgServerGroupRowStatus
column is 'notReady'.
In particular, a newly created row cannot be made
active until the corresponding
cdsgServerGroupName has been set.
cdsgServerGroupName may not be modified while the
value of this object is active(1):
An attempt to set these objects while the value of
cdsgServerGroupRowStatus is active(1) will result in
an inconsistentValue error.
Entries in this table with cdsgServerGroupRowStatus equal to
active(1) remain in the table until destroyed.
Entries in this table with cdsgServerGroupRowStatus equal to
values other than active(1) will be destroyed after timeout
(5 minutes).
Upon reload, cdsgServerGroupIndex values may be changed.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.10.132.1.1.1.1.4 |
cdsgServerTableThe table listing information regarding the server
which are part of the Diameter server groups.
Entries are added to this table via cdsgServerRowStatus
in accordance with the RowStatus convention. SEQUENCE OF CdsgServerEntry .1.3.6.1.4.1.9.10.132.1.1.2 |
cdsgServerEntryA row entry representing a Diameter server group. CdsgServerEntry .1.3.6.1.4.1.9.10.132.1.1.2.1 |
cdsgServerIndexA number uniquely identifying each Diameter Server.
An index that uniquely represents a Server within a
Server Group. This index is assigned arbitrarily
by the SNMP engine and is not saved over reloads. Unsigned32 (1..4294967295 ) .1.3.6.1.4.1.9.10.132.1.1.2.1.1 |
cdsgServerNameThe Server Name.
It has to be unique and not an empty string.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.10.132.1.1.2.1.2 |
cdsgServerStorageTypeThe storage type for this conceptual row. An agent
implementing the table must allow adding cdsgServerName
into the table. None of the columnar objects is writable
when the conceptual row is permanent.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.9.10.132.1.1.2.1.3 |
cdsgServerRowStatusThe status of this conceptual row.
To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).
This table is an extended table to the cdsgServerGroupTable
and so an entry here must have a corresponding parent entry
in the cdsgServerGroupTable as well. This would map all such
entries with the same cdsgServerEntry under one single
cdsgServerGroupEntry i.e these servers are under the server
group represented by the cdsgServerGroupEntry.
Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the cdsgServerRowStatus column is
'notReady'.
In particular, a newly created row cannot be made
active until the corresponding
cdsgServerName has been set.
cdsgServerName may not be modified while the
value of this object is active(1):
An attempt to set these objects while the value of
cdsgServerRowStatus is active(1) will result in
an inconsistentValue error.
Entries in this table with cdsgServerRowStatus equal to
active(1) remain in the table until destroyed.
Entries in this table with cdsgServerRowStatus equal to
values other than active(1) will be destroyed after timeout
(5 minutes).
Upon reload, cdsgServerIndex values may be changed.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.10.132.1.1.2.1.4 |
ciscoDiameterSGMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.132.2 |
ciscoDiameterSGMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.132.2.1 |
ciscoDiameterSGMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.132.2.2 |