CISCO-COMPRESSION-SERVICE-ADAPTER-MIB
AI MIB Summary
The CISCO-COMPRESSION-SERVICE-ADAPTER-MIB provides management access to Cisco compression service adapter hardware, enabling monitoring of interface status, compression session statistics, and throughput metrics for data reduction appliances.
Used to manage the compression service adapter.
Main OID:
ciscoCompressionServiceAdapterMIB.1.3.6.1.4.1.9.9.57
18
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
18 total| Object Name |
|---|
ciscoCompressionServiceAdapterMIBUsed to manage the compression service adapter. MODULE-IDENTITY .1.3.6.1.4.1.9.9.57 |
ciscoCSAMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.57.1 |
csaStats OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.57.1.1 |
csaStatsTableA table describing performance statistics and status of
compression service adapter. SEQUENCE OF CsaStatsEntry .1.3.6.1.4.1.9.9.57.1.1.1 |
csaStatsEntryEach entry in this table describes performance statistics
for a compression service. A new entry is created or removed
when compression service adapter is physically added or
removed from the device.
Each entry is indexed by cardIndex object, which is an
index for cardTable in chassis mib. Every card of type
sa-compression in cardTable will have corresponding entry
in csaStatsTable. CsaStatsEntry .1.3.6.1.4.1.9.9.57.1.1.1.1 |
csaInOctetsTotal number of compressed octets received by the compression
service adaptor.ro Counter32 .1.3.6.1.4.1.9.9.57.1.1.1.1.1 |
csaOutOctetsTotal number of compressed octets sent by the compression
service adaptor.ro Counter32 .1.3.6.1.4.1.9.9.57.1.1.1.1.2 |
csaInPacketsTotal number of compressed packets received by the compression
service adaptor.ro Counter32 .1.3.6.1.4.1.9.9.57.1.1.1.1.3 |
csaOutPacketsTotal number of compressed packets sent by the compression
service adaptor.ro Counter32 .1.3.6.1.4.1.9.9.57.1.1.1.1.4 |
csaInPacketsDropTotal number of output packets dropped.
A large number of packets dropped by a compression adaptor
would indicate, amount of data being passed to the adaptor
for processing, exceeds its capacity.ro Counter32 .1.3.6.1.4.1.9.9.57.1.1.1.1.5 |
csaOutPacketsDropTotal number of input packets dropped.
A large number of packets dropped by a compression adaptor
would indicate, amount of data being passed to the adaptor
for processing, exceeds its capacity.ro Counter32 .1.3.6.1.4.1.9.9.57.1.1.1.1.6 |
csaNumberOfRestartsNumber of compression session restarts. A large number of
restarts could indicate incompatible remote router, data being
corrupted in transmission or packet order not being
maintained.ro Counter32 .1.3.6.1.4.1.9.9.57.1.1.1.1.7 |
csaCompressionRatioCurrent Compression ratio, the percentage the data was
compressed. This is an instantaneous value.
Compression ratio of 0% would indicate no
compression, a compression ratio of 90% could mean 100
octets were compressed into 10 octets.ro Gauge32 .1.3.6.1.4.1.9.9.57.1.1.1.1.8 |
csaDecompressionRatioCurrent decompression ratio, the percentage the data was
decompressed. This is an instantaneous value.
Decompression ratio of 0% would indicate no decompression,
a decompression ratio of 90% could mean 10 octets were
decompressed into 100 octets.ro Gauge32 .1.3.6.1.4.1.9.9.57.1.1.1.1.9 |
csaEnableIndicates whether compression service adapter is currently
active. Also allows users to set status via SNMP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.57.1.1.1.1.10 |
ciscoCSAMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.57.3 |
csaMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.57.3.1 |
csaMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.57.3.2 |