CISCO-CIRCUIT-INTERFACE-MIB
AI MIB Summary
The CISCO-CIRCUIT-INTERFACE-MIB enables configuration and management of descriptive circuit identifiers for Layer 2 WAN interfaces, specifically ATM and Frame Relay, on Cisco network devices. This module facilitates the association of logical circuit descriptions with physical or virtual interface objects to support accurate circuit tracking and inventory management in multi-vendor or complex WAN environments.
The MIB module to configure the circuit description for an interface. The circuit description can be used to describe and identify circuits on interfaces like ATM, frame-relay etc.
Main OID:
ciscoCircuitInterfaceMIB.1.3.6.1.4.1.9.9.160
10
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
10 total| Object Name |
|---|
ciscoCircuitInterfaceMIBThe MIB module to configure the circuit description
for an interface.
The circuit description can be used to describe and
identify circuits on interfaces like ATM,
frame-relay etc. MODULE-IDENTITY .1.3.6.1.4.1.9.9.160 |
ciscoCircuitInterfaceMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.160.1 |
cciDescription OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.160.1.1 |
cciDescriptionTableThis table contains a circuit description to identify
circuit based interfaces like ATM, Frame-Relay etc.
The circuit description could be used for example, to
correlate performance statistics associated with the
corresponding interfaces. SEQUENCE OF CciDescriptionEntry .1.3.6.1.4.1.9.9.160.1.1.1 |
cciDescriptionEntryEach cciDescriptionEntry contains the circuit
description for a particular circuit based interface.
The entry is identified by the ifIndex which would
typically correspond to circuit based interfaces.
Interfaces with ifType equal to atm(37),
frameRelay(32) frameRelayService(44) are some
examples.
Entries can only be created by management station
action.
Entries can be deleted by setting the cciStatus object
to destroy(6). The agent will delete any cciEntry if
the corresponding ifEntry is deleted.
Entries are not maintained in any kind of NV-storage,
and will not be recreated by the agent after a reboot. CciDescriptionEntry .1.3.6.1.4.1.9.9.160.1.1.1.1 |
cciDescrThe circuit description of the interface. It has no
default value.rw SnmpAdminString .1.3.6.1.4.1.9.9.160.1.1.1.1.1 |
cciStatusThe row status object, but with restricted values.
Only two values are allowed for this object:
createAndGo(4) and destroy(6).
The row is created by specifying the value for
cciDescr and setting this object to createAndGo(4).
If the row creation is succesfull, the cciStatus
would be active(1). In the active(1) state, the
cciDescr can be modifed.
The row is deleted by setting this object to
destroy(6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.160.1.1.1.1.2 |
ciscoCircuitInterfaceMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.160.3 |
ciscoCircuitInterfaceMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.160.3.1 |
ciscoCircuitInterfaceMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.160.3.2 |