CISCO-CHANNEL-MIB
AI MIB Summary
The CISCO-CHANNEL-MIB provides management objects for monitoring the operational status, configuration parameters, and performance counters of Cisco Mainframe Channel Connection (CMCC) interface cards. It enables administrators to track mainframe channel link states, session availability, and error statistics specific to the CMCC hardware architecture.
This is the MIB module for objects used to manage the Cisco Mainframe Channel Connection (CMCC) cards.
Main OID:
channel.1.3.6.1.4.1.9.9.20
97
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
97 total| Object Name |
|---|
channelThis is the MIB module for objects used to manage
the Cisco Mainframe Channel Connection (CMCC) cards. MODULE-IDENTITY .1.3.6.1.4.1.9.9.20 |
cipCard OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.20.1 |
cipCardTableThis table contains a list of values for the
CMCC card which can be accessed to
determine the general state of the CMCC.
This table extends CardTable in the cisco.mib SEQUENCE OF CipCardEntry .1.3.6.1.4.1.9.9.20.1.1 |
cipCardEntryA list of values for a CMCC Card.
This extends cardTableEntry in the cisco.mib CipCardEntry .1.3.6.1.4.1.9.9.20.1.1.1 |
cipCardEntryIndexIndex into cardTable (not physical chassis
slot number, matches cisco chassis MIB cardindex). Integer32 .1.3.6.1.4.1.9.9.20.1.1.1.1 |
cipCardEntryNameThe configured name for the CMCC.rw DisplayString .1.3.6.1.4.1.9.9.20.1.1.1.2 |
cipCardEntryTotalMemoryTotal memory on the card.ro Integer32 UNITS "kilo bytes" .1.3.6.1.4.1.9.9.20.1.1.1.3 |
cipCardEntryFreeMemoryTotal free memory on the card, that is the
amount of memory not in use.ro Integer32 UNITS "kilo bytes" .1.3.6.1.4.1.9.9.20.1.1.1.4 |
cipCardEntryCpuUtilizationThe average, over the last minute, of the
percentage of time that this processor was
running. This includes time spent on
non-productive polling and time used by
routine maintenance tasks. This value is
not a measure of the processor's ability
to handle more work, which is represented
by the cipCardEntryCpuLoad information. The
ability to handle more work could also be
affected by DMA and channel load, represented
by the cipCardEntryDmaLoad and cipCardDtrBrd-
ChannelAdapterLoad statistics.ro INTEGER .1.3.6.1.4.1.9.9.20.1.1.1.5 |
cipCardEntryTimeSinceLastResetThe amount of time the CMCC card has been running.ro Counter32 UNITS "seconds" .1.3.6.1.4.1.9.9.20.1.1.1.6 |
cipCardEntryMajorSwRevisionNrThe major software revision number for the software
loaded on the CMCC card.ro Integer32 .1.3.6.1.4.1.9.9.20.1.1.1.7 |
cipCardEntryMinorSwRevisionNrThe minor software revision number for the software
loaded on the CMCC card.ro Integer32 .1.3.6.1.4.1.9.9.20.1.1.1.8 |
cipCardEntryMajorHwRevisionNrThe major hardware revision number for the software
loaded on the CMCC card.ro Integer32 .1.3.6.1.4.1.9.9.20.1.1.1.9 |
cipCardEntryMinorHwRevisionNrThe minor hardware revision number for the software
loaded on the CMCC card.ro Integer32 .1.3.6.1.4.1.9.9.20.1.1.1.10 |
cipCardEntryCpuLoad1mThe average, over the last minute, of the
percentage of time that this processor was
utilized to transfer data. It does not include
idle time or time used by routine maintenance
tasks.ro INTEGER .1.3.6.1.4.1.9.9.20.1.1.1.11 |
cipCardEntryCpuLoad5mThe average, over the last 5 minutes, of the
percentage of time that this processor was
utilized to transfer data. It does not include
idle time or time used by routine maintenance
tasks.ro INTEGER .1.3.6.1.4.1.9.9.20.1.1.1.12 |
cipCardEntryCpuLoad60mThe average, over the last 60 minutes, of the
percentage of time that this processor was
utilized to transfer data. It does not include
idle time or time used by routine maintenance
tasks.ro INTEGER .1.3.6.1.4.1.9.9.20.1.1.1.13 |
cipCardEntryDmaLoad1mThe average, over the last minute, of the
percentage of time the DMA controller was
being used to transfer data between the CMCC
card and the route processor.ro INTEGER .1.3.6.1.4.1.9.9.20.1.1.1.14 |
cipCardEntryDmaLoad5mThe average, over the last 5 minutes, of the
percentage of time the DMA controller was
being used to transfer data between the CMCC
card and the route processor.ro INTEGER .1.3.6.1.4.1.9.9.20.1.1.1.15 |
cipCardEntryDmaLoad60mThe average, over the last 60 minutes, of the
percentage of time the DMA controller was
being used to transfer data between the CMCC
card and the route processor.ro INTEGER .1.3.6.1.4.1.9.9.20.1.1.1.16 |
cipCardDaughterBoardTableThis table contains a list of objects pertaining to
the daughter board on the CMCC card. SEQUENCE OF CipCardDaughterBoardEntry .1.3.6.1.4.1.9.9.20.1.2 |
cipCardDaughterBoardEntryA list of daughter board values. CipCardDaughterBoardEntry .1.3.6.1.4.1.9.9.20.1.2.1 |
cipCardDtrBrdIndexThis indicates which daughter board is
is being referenced for a particular CMCC card. Integer32 .1.3.6.1.4.1.9.9.20.1.2.1.1 |
cipCardDtrBrdTypeThis indicates the channel path interface type.ro Enumeration .1.3.6.1.4.1.9.9.20.1.2.1.2 |
cipCardDtrBrdStatuscipCardDtrBrdStatus is true when the
microcode for the daughter board has been
successfully loaded and is executing, false
otherwise.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.20.1.2.1.3 |
cipCardDtrBrdSignalFor ESCON, cipCardDtrBrdSignal is true when
light has been seen on the fiber and synchronization
has been established, false otherwise.
For the Parallel Channel Adapter (PCA) which provides
the Bus and Tag connection, cipCardDtrBrdSignal is
true when Operational out has been sensed, false
otherwise.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.20.1.2.1.4 |
cipCardDtrBrdOnlineFor ESCON, cipCardDtrBrdOnline is true when a path
has been established with at least one channel,
false otherwise.
For PCA, cipCardDtrBrdOnline is true when the PCA
is online to the channel. It will respond to at
least one device addressro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.20.1.2.1.5 |
implicitIncidentsThis counts the number of times the ESCON Processor
recovers from an internal error.ro Counter32 .1.3.6.1.4.1.9.9.20.1.2.1.6 |
codeViolationErrorsThe number of recognized code-violation errors.
A trap is issued when this number exceeds the bit
error rate threshold for ESCON. The bit
error rate threshold is set at 15 error burst
within a 5 minute period. An error burst is the
time period of 1.5 seconds plus or minus 0.05
seconds during which one or more code violations
errors occur.ro Counter32 .1.3.6.1.4.1.9.9.20.1.2.1.7 |
linkFailureSignalOrSyncLossThe number of link failures recognized as a
result of a loss of signal or loss of
synchronization that persisted longer than the
link interval duration, the link interval
duration is one second with a tolerance of +1.5
seconds and -0 seconds.ro Counter32 .1.3.6.1.4.1.9.9.20.1.2.1.8 |
linkFailureNOSsThe number of link failures recognized as a result of
the not-operational sequence (NOS).ro Counter32 .1.3.6.1.4.1.9.9.20.1.2.1.9 |
linkFailureSequenceTimeoutsThe number of link failures recognized as a result of
a connection recovery timeout or response timeout
occurring while in transmit OLS state.ro Counter32 .1.3.6.1.4.1.9.9.20.1.2.1.10 |
linkFailureInvalidSequencesThe number of link failures recognized as a result of
an invalid sequence for Link-Level-Facility State.
Either a UD or UDR sequence was recognized while in
wait-for-offline-sequence state.ro Counter32 .1.3.6.1.4.1.9.9.20.1.2.1.11 |
linkIncidentTrapCauseThis indicates the reason for the last link
failure.
liStatus indicates that the daughter board status
has changed.
liImplicitIncident indicates that a condition which
may cause the recognition of a link incident in the
attached node has been recognized.
liBERthreshold indicates that the code violation
error rate exceeded the threshold.
liSignalOrSyncLoss indicates a loss of signal or
loss of synchronization that persisted longer
than the link interval duration.
liNotOperationalSequence indicates the recognition
of not-operational sequence, usually due to the
operator taking the channel offline.
liSequenceTimeout indicates a connection recovery
timeout or response timeout occurring while in
transmit OLS state.
linvalidSequence indicates a UD or UDR sequence was
recognized while in wait-for-offline-sequence state.ro Enumeration .1.3.6.1.4.1.9.9.20.1.2.1.12 |
cipCardDtrBrdLastStatThis object indicates how old the statistics are.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.9.9.20.1.2.1.13 |
cipCardDtrBrdNextStatThis object indicates when statistics will next
be read.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.9.9.20.1.2.1.14 |
cipCardDtrBrdChannelLoad1mThe average, over the last minute, of the
percentage of time the channel adapter was
busy communicating to a host.ro INTEGER .1.3.6.1.4.1.9.9.20.1.2.1.15 |
cipCardDtrBrdChannelLoad5mThe average, over the last 5 minutes, of the
percentage of time the channel adapter was
busy communicating to a host.ro INTEGER .1.3.6.1.4.1.9.9.20.1.2.1.16 |
cipCardDtrBrdChannelLoad60mThe average, over the last 60 minutes, of the
percentage of time the channel adapter was
busy communicating to a host.ro INTEGER .1.3.6.1.4.1.9.9.20.1.2.1.17 |
cipCardSubChannelTableThis table contains a list of objects pertaining to
each host connection. SEQUENCE OF CipCardSubChannelEntry .1.3.6.1.4.1.9.9.20.1.3 |
cipCardSubChannelEntryA list of host connection statistics. CipCardSubChannelEntry .1.3.6.1.4.1.9.9.20.1.3.1 |
cipCardSubChannelIndexThis indicates which subchannel is being referenced
for a particular daughter board on a CMCC card.
This value is constructed as follows:
path * 256 + device
Path and device are the values in
CipCardClawConfigTable.ro Integer32 .1.3.6.1.4.1.9.9.20.1.3.1.1 |
cipCardSubChannelConnectionsNumber of times a device was connected to the
subchannel. For some devices, this correlates with
the number of start subchannels.ro Counter32 .1.3.6.1.4.1.9.9.20.1.3.1.2 |
cipCardSubChannelCancelsNumber of halt subchannels.ro Counter32 .1.3.6.1.4.1.9.9.20.1.3.1.3 |
cipCardSubChannelSelectiveResetsNumber of selective resets.ro Counter32 .1.3.6.1.4.1.9.9.20.1.3.1.4 |
cipCardSubChannelSystemResetsNumber of system resets.ro Counter32 .1.3.6.1.4.1.9.9.20.1.3.1.5 |
cipCardSubChannelDeviceErrorsNumber of device level errors.ro Counter32 .1.3.6.1.4.1.9.9.20.1.3.1.6 |
cipCardSubChannelWriteBlocksDroppedNumber of times a block was received by the channel
and a router buffer was not available so the block
was discarded.ro Counter32 .1.3.6.1.4.1.9.9.20.1.3.1.7 |
cipCardSubChannelLastSenseDataThis is the last sense data sent to the channel
by this device.ro OCTET STRING .1.3.6.1.4.1.9.9.20.1.3.1.8 |
cipCardSubChannelLastSenseDataTimeThis indicates the time when the last sense data
was sent to the channel by this device.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.9.20.1.3.1.9 |
cipCardSubChannelCuBusiesThis is the number of control unit busies sent to the
channel when this device was requested.ro Counter32 .1.3.6.1.4.1.9.9.20.1.3.1.10 |
cipCardSubChannelCmdRetriesNumber of times the subchannel went into command
retry state. The sum of this value and
cipCardSubChannelConnections gives
the number of start subchannels.ro Counter32 .1.3.6.1.4.1.9.9.20.1.3.1.11 |
cipCardSubChannelResetEventA state that a device gets into after a system reset
and is cleared by a resetting event unit check.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.20.1.3.1.12 |
cipCardSubChannelShortBusyA transient state that a device can get into during
processing of various resets.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.20.1.3.1.13 |
cipCardSubChannelCMDRetryA state that a device can get into if the mainframe
tries to write data to the CMCC when the CMCC has no
buffers for it or if the mainframe performs a read
operation and the CMCC doesn't have any data to send.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.20.1.3.1.14 |
cipCardSubChannelBufferWaitA state that a device can get into when the mainframe
tries to write data to the CMCC and the CMCC has no
buffers for all of the write operation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.20.1.3.1.15 |
cipCardSubChannelStatPendingIndicates that the CMCC has status to present for a
particular device. The indication is cleared when the
mainframe excepts the status.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.20.1.3.1.16 |
cipCardSubChannelSuspendIndicates that the device task has decided to suspend data
transfer for a particular device.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.20.1.3.1.17 |
cipCardSubChannelFBLWaitA state that a device can get into when the mainframe
tries to write data to the CMCC and the CMCC has no buffers
for all of the write operation.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.20.1.3.1.18 |
cipCardClaw OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.20.1.4 |
cipCardClawTableThis table contains status and other information
not covered in the following tables for the Common
Link Access to Workstation (CLAW) protocol. SEQUENCE OF CipCardClawEntry .1.3.6.1.4.1.9.9.20.1.4.1 |
cipCardClawEntryA list of CLAW values. CipCardClawEntry .1.3.6.1.4.1.9.9.20.1.4.1.1 |
cipCardClawIndexThis indicates which CLAW link is being referenced
for a particular subchannel on a daughter board on a
CMCC card.ro Integer32 .1.3.6.1.4.1.9.9.20.1.4.1.1.1 |
cipCardClawConnectedIndicates CLAW connection status.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.20.1.4.1.1.2 |
cipCardClawConfigTableThis table contains configuration information for
the Common Link Access to Workstation (CLAW)
protocol. SEQUENCE OF CipCardClawConfigEntry .1.3.6.1.4.1.9.9.20.1.4.2 |
cipCardClawConfigEntryA list of CLAW configuration values. CipCardClawConfigEntry .1.3.6.1.4.1.9.9.20.1.4.2.1 |
cipCardClawConfigPathHex path identifier for the escon director
switch port containing the fiber from the
channel on the host to which this CMCC CLAW
task connects.
This is a concatenation of the switch port number,
the channel logical address (used by the host to
associate an logical partition (LPAR) with the
control unit), and the control unit logical
address (address of a logical control
unit used by the host to associate a group of
physical devices).
For a directly connected channel, the switch
port number is usually 01.rw OCTET STRING .1.3.6.1.4.1.9.9.20.1.4.2.1.1 |
cipCardClawConfigDeviceTwo digit hex device address for the device
the SNA host will use to communicate with the
CLAW task on the CMCC card. The address must
be even.rw OCTET STRING .1.3.6.1.4.1.9.9.20.1.4.2.1.2 |
cipCardClawConfigIpAddrIP address of the host application for the CMCC
CLAW task as specified in the HOME statement
of the PROFILE TCPIP.rw IpAddress .1.3.6.1.4.1.9.9.20.1.4.2.1.3 |
cipCardClawConfigHostNameCLAW host name for this CLAW device.rw DisplayString .1.3.6.1.4.1.9.9.20.1.4.2.1.4 |
cipCardClawConfigRouterNameCLAW router name for this CLAW device.rw DisplayString .1.3.6.1.4.1.9.9.20.1.4.2.1.5 |
cipCardClawConfigHostApplCLAW host application name for this CLAW connection.rw DisplayString .1.3.6.1.4.1.9.9.20.1.4.2.1.6 |
cipCardClawConfigRouterApplCLAW router application name for this CLAW
connection.rw DisplayString .1.3.6.1.4.1.9.9.20.1.4.2.1.7 |
cipCardClawConfigBroadcastEnableControl processing of broadcast frames for the
path/device.
Enable turns broadcast processing on.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.20.1.4.2.1.8 |
cipCardClawConfigRowStatusThis object is used by a management station to
create or delete the row entry in
cipCardClawConfigTable following the RowStatus
textual convention.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.20.1.4.2.1.9 |
cipCardClawDataXferStatsTableThis table contains a list of objects pertaining to
data transfer statistics per CLAW Logical Link. SEQUENCE OF CipCardClawDataXferStatsEntry .1.3.6.1.4.1.9.9.20.1.4.3 |
cipCardClawDataXferStatsEntryA list of daughter board statistics. CipCardClawDataXferStatsEntry .1.3.6.1.4.1.9.9.20.1.4.3.1 |
cipCardClawDataXferStatsBlocksReadNumber of successful read data transfer channel
command words (CCWs) from the channel perspective.ro Counter32 .1.3.6.1.4.1.9.9.20.1.4.3.1.1 |
cipCardClawDataXferStatsBlocksWrittenNumber of successful write data transfer CCWs
from the channel perspective.ro Counter32 .1.3.6.1.4.1.9.9.20.1.4.3.1.2 |
cipCardClawDataXferStatsBytesReadNumber of bytes successfully read from the
channel perspective.ro Counter32 .1.3.6.1.4.1.9.9.20.1.4.3.1.3 |
cipCardClawDataXferStatsHCBytesReadNumber of bytes successfully read from the channel
perspective. This is the 64-bit (High Capacity)
version of clawDataXferStatsBytesRead.ro Counter64 .1.3.6.1.4.1.9.9.20.1.4.3.1.4 |
cipCardClawDataXferStatsBytesWrittenNumber of bytes successfully written from the
channel perspective.ro Counter32 .1.3.6.1.4.1.9.9.20.1.4.3.1.5 |
cipCardClawDataXferStatsHCBytesWrittenNumber of bytes successfully written from the
channel perspective. This is the 64-bit version
version of clawDataXferStatsBytesWritten.ro Counter64 .1.3.6.1.4.1.9.9.20.1.4.3.1.6 |
cipCardClawDataXferStatsReadBlocksDroppedNumber of read blocks dropped.ro Counter32 .1.3.6.1.4.1.9.9.20.1.4.3.1.7 |
cipCardClawDataXferStatsWriteBlocksDroppedNumber of write blocks dropped.ro Counter32 .1.3.6.1.4.1.9.9.20.1.4.3.1.8 |
cipCardClawDataXferStatsBufferGetRetryCountNumber of times a buffer was requested and none were
available.ro Counter32 .1.3.6.1.4.1.9.9.20.1.4.3.1.9 |
cipCardTraps OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.20.1.5 |
cipCardLinkFailureThis trap indicates that a significant link event has been recognized
resulting in the degradation of the interface line quality.
(This trap was deactivated 6/97, below trap is now sent on link failures) NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.20.1.5.1 |
cipCardDtrBrdLinkFailureThis trap indicates that a significant link event has been recognized
resulting in the degradation of the interface line quality. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.20.1.5.2 |
cipCardApplicationTableThis table contains information on the applications
loaded on the CMCC card. SEQUENCE OF CipCardApplicationEntry .1.3.6.1.4.1.9.9.20.1.6 |
cipCardApplicationEntryA list of application information. CipCardApplicationEntry .1.3.6.1.4.1.9.9.20.1.6.1 |
cipCardApplicationNameIndexThe application name. DisplayString .1.3.6.1.4.1.9.9.20.1.6.1.1 |
cipCardApplicationRevisionThe application's software revision number.ro Integer32 .1.3.6.1.4.1.9.9.20.1.6.1.2 |
cipCardApplicationCompileInfoThe application's compilation information
(date and user-id)ro DisplayString .1.3.6.1.4.1.9.9.20.1.6.1.3 |
ciscoChannelMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.20.2 |
ciscoChannelMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.20.2.1 |
ciscoChannelMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.20.2.2 |