CISCO-CCME-MIB
AI MIB Summary
The CISCO-CCME-MIB enables SNMP-based monitoring and configuration of Cisco CallManager Express (CCME) telephony services on Cisco IOS routers, specifically tracking session states, call routing tables, and gateway registration status for Key System or Hybrid PBX deployments.
This MIB allows management of Cisco CallManager Express (CCME) feature in Cisco IOS. CCME is optional software feature that enables Cisco routers to deliver Key System or Hybrid PBX functionality for enterprise branch offices or small businesses.
Main OID:
ciscoCcmeMIB.1.3.6.1.4.1.9.9.439
269
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
269 total| Object Name |
|---|
ciscoCcmeMIBThis MIB allows management of Cisco CallManager Express
(CCME) feature in Cisco IOS. CCME is optional software
feature that enables Cisco routers to deliver Key System
or Hybrid PBX functionality for enterprise branch
offices or small businesses. MODULE-IDENTITY .1.3.6.1.4.1.9.9.439 |
ciscoCcmeMIBNotifs OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.439.0 |
ccmeMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.439.0.0 |
ccmeStatusChangeNotifA ccmeStatusChangeNotif is generated if there is a change
in ccmeEnabled. This notification is generated only when
value of the 'ccmeNotificationEnable' object is 'true'. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.439.0.0.1 |
ccmeEphoneUnRegThresholdExceedThis notification is generated every time the total
number of Ephones registered is exceeded and then dropped
below threshold specified by 'ccmeEphoneUnRegThreshold'
object. This objects is generated only if
'ccmeNotificationEnable' object is 'true'. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.439.0.0.2 |
ccmeEPhoneDeceasedThis notification is generated every time registered Ephone
changes state to 'Deceased', indicating that the connection
to the Cisco IP phone was closed because of a keepalive
timeout. This objects is generated only if
'ccmeNotificationEnable' object is 'true'. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.439.0.0.3 |
ccmeEPhoneRegFailedThis notification is generated every time an Ephone
attempts to register but fails. This notification is
only for those failures seen by the CCME or SRST
gateway. This objects is generated only if
'ccmeNotificationEnable' object is 'true'. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.439.0.0.4 |
ccmeEphoneLoginFailedThis notification is generated every time an Ephone user
login is rejected/failed.
This objects is generated only if 'ccmeNotificationEnable'
object is 'true'. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.439.0.0.5 |
ccmeNightServiceChangeNotifA ccmeNightServiceChangeNotif notification is generated
if there is change in night service status on this
device. This objects is generated only if
'ccmeNotificationEnable' object is 'true'. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.439.0.0.6 |
ccmeLivefeedMohFailedNotifA ccmeLivefeedMohFailedNotif notification is generated
when the Music-on-hold (Moh) live feed has failed. This
objects is generated only if 'ccmeNotificationEnable'
object is 'true'. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.439.0.0.7 |
ccmeMaxConferenceNotifA ccmeMaxConferenceNotif notification is generated
if the maximum number of simultaneous three-party
conferences supported by the Cisco CallManager
Express is exceeded. This objects is generated only if
'ccmeNotificationEnable' object is 'true'. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.439.0.0.8 |
ccmeKeyEphoneRegChangeNotifA ccmeKeyEphoneRegChangeNotif notification is generated
if there is a change in the registration status of Key
IP phone. This objects is generated only if
'ccmeNotificationEnable' object is 'true'. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.439.0.0.9 |
ciscoCcmeMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.439.1 |
ccmeConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.439.1.1 |
ccmeEnabledIndicates whether the Cisco CallManager Express
feature is enabled on the device.
'true' means that the CCME feature is enabled on
this device.
'false' means that the CCME feature is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.1 |
ccmeVersionThe version of Cisco CallManager Express on
the device.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.1.2 |
ccmeIPAddressTypeAddress type of ccmeIPAddress. Only IPv4 and IPv6
addresses are expected.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.439.1.1.3 |
ccmeIPAddressIndicates the IP address through which the IP
phones communicate with CCME.
The type of this address is determined by the
value of the ccmeSysIPAddressType object.
This IP address is usually the IP address
bound to the Ethernet port on the gateway
to which the phones are connected.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.439.1.1.4 |
ccmePortNumberThis object indicates the TCP port
number to use for Skinny Client Control
Protocol (SCCP).
This port also indicates through which
IP phones communicate with this device.ro InetPortNumber .1.3.6.1.4.1.9.9.439.1.1.5 |
ccmeMaxEphonesMaximum number of IP phones allowed by the
configuration for the Cisco CallManager Express
on the device. Maximum permissible range is
IOS version and platform dependent.
A value of zero indicates no IP phones are permitted
to register to this device.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.6 |
ccmeMaxDirectoryNumberThis object indicates the maximum number of
IP phones extensions (ephone-dns) or directory
numbers supported by this device.
Maximum permissible range is IOS version and
platform dependent. A value of zero indicates
no IP phones extensions could be created.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.7 |
ccmeMaxConferencesMaximum number of simultaneous three-party
conferences supported by the Cisco CallManager
Express on the device.
Range is IOS version and platform dependent.
With CCME Version 3.1, the following are the
maximum values for each platform -
Cisco 1750, Cisco 1751, Cisco 2600, Cisco 3640
- 8 conferences.
Cisco 3660, Cisco 3725, Cisco 3745
- 16 conferences.
Default is half the maximum number of simultaneous
three-party conferences for each platform.
A value of zero indicates no three-party conferences
allowed on this device.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.8 |
ccmeMaxRedirectIndicates the maximum number of times that a
call can be redirected by call forwarding or
transfer within this device.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.9 |
ccmeScriptNameThis object indicates the session-level IVR
application script in Tool Command Language (TCL)
for all extensions (ephone-dns) in CCME system.
By default no application script is selected for
all extensions and the object length in this case
will return a zero length string.ro SnmpAdminString .1.3.6.1.4.1.9.9.439.1.1.10 |
ccmeVoiceMailNumberThis object indicates the E.164 phone number
that is associated with a voice-mail (speed-dial)
on this device.
If voice-mail number is not configured,
this object has a length of zero.ro SnmpAdminString .1.3.6.1.4.1.9.9.439.1.1.11 |
ccmeMwiRelayIndicates whether the device can relay
message-waiting indication (MWI) notification
to remote Cisco IP phones.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.12 |
ccmeMwiExpiresExpiration time in seconds, for the registration
of the message-waiting indication (MWI) client
or server.
Range is 600 to 99999.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.13 |
ccmeTransferSystemThis object indicates the call transfer method
for all configured Cisco IP phone extensions,
that use the ITU-T H.450.2 standard.
Call transfers that use the H.450.2 standard
can be 'blind' or 'consultative'.
A blind transfer is one in which the transferring
extension connects the caller to a destination
extension before ringback begins.
A consultative transfer is one in which the
transferring party either connects the caller
to a ringing phone (ringback heard) or speaks
with the third party before connecting the caller
to the third party.
blind - Calls are transferred without consultation
using a single phone line and the Cisco
proprietary method.
localConsult - Calls are transferred with local
consultation using the second phone line
if available, or the calls fall back to
blind for nonlocal consultation or transfer
target. This mode is intended for use
primarily in voice over Frame Relay networks.
fullBlind - Calls are transferred without
consultation using H.450.2 standard method.
fullConsult - Calls are transferred using H.450.2
with consultation using the second phone
line if available, or the calls fall back
to fullBlind if the second line is unavailable.ro Enumeration .1.3.6.1.4.1.9.9.439.1.1.14 |
ccmeTimeFormatTime display format on Cisco IP phones in a
Cisco CallManager Express system.
twelve(1) - 12 hour clock.
twentyfour(2) - 24 hour clock.ro Enumeration .1.3.6.1.4.1.9.9.439.1.1.15 |
ccmeDateFormatIndicates the date display format on
Cisco IP phones in a Cisco CallManager
Express system.ro Enumeration .1.3.6.1.4.1.9.9.439.1.1.16 |
ccmeUrlforServicesBtnThis object indicates the URL information for
the 'Services' button on the Cisco IP phone display.
The Cisco IP Phone 7940 and Cisco IP phone 7960
can support four URL's in association with the
four programmable feature buttons on those IP
phones - Directories, Information, Messages and
Services. The fifth button, Settings, is managed
entirely by the phone. Operation of these services
is determined by the Cisco IP phone capabilities
and the content of the referenced URL.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.1.17 |
ccmeUrlforDirectoriesBtnThis object indicates the URL information for
the 'Directories' button on the Cisco IP phone
display.
The Cisco IP Phone 7940 and Cisco IP phone 7960
can support four URL's in association with the
four programmable feature buttons on those IP
phones - Directories, Information, Messages and
Services. The fifth button, Settings, is managed
entirely by the phone. Operation of these services
is determined by the Cisco IP phone capabilities
and the content of the referenced URL.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.1.18 |
ccmeMohFlashFileThis object indicates the name of the audio file to
use for the Music on hold (MOH) audio stream.
Audio files that are used for MOH exist in the flash
file system on the device. A MOH file can be .au or .wav
file format. However, the file format must contain
8-bit 8-KHz data in a-law or mu-law.
Maximum length of filename is 128 characters long.
This object returns a zero length string if the MOH
from flash is not configured on this router.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.1.19 |
ccmeMohMulticastFromFlashEnabledIndicates whether music-on-hold (MOH) multicast from
flash file source is enabled or disabled on this router.
If ccmeMohFlashFile is zero length this
object has no relevance.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.20 |
ccmeMohFlashMulticastIPAddrThis object indicates the destination IP address
for multicast of the audio stream from Flash file,
that is designated for MOH. If ccmeMohFlashFile is
zero length this object has no relevance.
Cisco IP phones don not support multicast at
224.x.x.x addresses.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.439.1.1.21 |
ccmeMohFlashMulticastPortNumThis object indicates the media port for multicast
of the audio stream from Flash file that is
designated for MOH. This object has no relevance
if ccmeMohMulticastFromFlash object is zero length.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.439.1.1.22 |
ccmePhoneFirmwareTableA list of firmware load configured for each
IP Phone on this device. SEQUENCE OF CcmePhoneFirmwareEntry .1.3.6.1.4.1.9.9.439.1.1.23 |
ccmePhoneFirmwareEntryInformation on an Cisco IP phone type and its
configured firmware load.
There is an entry in this table for each IP Phone
type firmware that is configured on this device. CcmePhoneFirmwareEntry .1.3.6.1.4.1.9.9.439.1.1.23.1 |
ccmePhoneFirmwareIndexAn arbitrary and unique index for this
CcmePhoneFirmwareEntry. Integer32 .1.3.6.1.4.1.9.9.439.1.1.23.1.1 |
ccmePhoneTypeType or model of Cisco IP phone.
Cisco IP Phone types are 7902, 7905, 7910, 7912,
7914, 7920, 7935, 7936, 7940, 7960, ATA-186, ATA-188ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.1.23.1.2 |
ccmePhoneFirmwareRevThe vendor-specific firmware revision string
configured for the Cisco IP phone on this device.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.1.23.1.3 |
ccmeTransferPatternTableA list of transfer patterns configured
on this device. SEQUENCE OF CcmeTransferPatternEntry .1.3.6.1.4.1.9.9.439.1.1.24 |
ccmeTransferPatternEntryInformation on a transfer pattern configured.
There is an entry in this table for each
transfer pattern that is configured on this device. CcmeTransferPatternEntry .1.3.6.1.4.1.9.9.439.1.1.24.1 |
ccmeTransferPatternIndexAn arbitrary and unique index for this
CcmeTransferPatternEntry. Integer32 .1.3.6.1.4.1.9.9.439.1.1.24.1.1 |
ccmeTransferPatternString of digits for permitted call transfers.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.1.24.1.2 |
ccmeTransferPatternTypeIndicates the pattern for call transfer.
'blind(1)' indicates blind transfer pattern.
'h4502(2)' indicates H.450.2 consultative call transfer.ro Enumeration .1.3.6.1.4.1.9.9.439.1.1.24.1.3 |
ccmeWebGUIEditEnabledIndicates Cisco CallManager Express web-based
Graphical User Interface (GUI) is allowed to add
extensions (ephone-dns).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.25 |
ccmeWebGUITimeEnabledIndicates Cisco CallManager Express web-based
Graphical User Interface (GUI) is allowed to change
or set time on this device.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.26 |
ccmeAfterHrsBlockPatternTableA list of after hour block patterns configured on
this device. SEQUENCE OF CcmeAfterHrsBlockPatternEntry .1.3.6.1.4.1.9.9.439.1.1.27 |
ccmeAfterHrsBlockPatternEntryInformation about a configured after hours block
pattern.
There is an entry in this table for each
after hours block that is configured on
this device. CcmeAfterHrsBlockPatternEntry .1.3.6.1.4.1.9.9.439.1.1.27.1 |
ccmeAfterHrsBlockPatternTagAn unique identifier tag configured for a pattern. Integer32 .1.3.6.1.4.1.9.9.439.1.1.27.1.1 |
ccmeAfterHrsBlockPatternIndicates the configured string of outgoing call
digits that will be matched for blocking call at
specified after hours.
Example - 9011ro CcmeDigitPatternString .1.3.6.1.4.1.9.9.439.1.1.27.1.2 |
ccmeAfterHrsBlockPatternAllTimeIndicates whether after hours block pattern is
applicable all time.
'true' means ccmeAfterHrsBlockPattern
pattern will always be applied, 7 days a week,
24 hours a day.
'false' means ccmeAfterHrsBlockPattern pattern
will be blocked during the days and dates defined by
ccmeAfterHrsBlockDateTable and
ccmeAfterHrsBlockDayTable objects.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.27.1.3 |
ccmeAfterHrsBlockDateTableA list of recurring time period based on date during
which outgoing calls that match defined block patterns
are blocked on IP phones. SEQUENCE OF CcmeAfterHrsBlockDateEntry .1.3.6.1.4.1.9.9.439.1.1.28 |
ccmeAfterHrsBlockDateEntryInformation on a configured after hour block pattern
date. There is an entry in this table for each entry
that is configured on this device. An entry is deleted
from this table once an after hour block configuration
is removed from this device. CcmeAfterHrsBlockDateEntry .1.3.6.1.4.1.9.9.439.1.1.28.1 |
ccmeAfterHrsBlockDateIndexAn arbitrary and unique index for this
CcmeAfterHrsBlockDateEntry. Integer32 .1.3.6.1.4.1.9.9.439.1.1.28.1.1 |
ccmeAfterHrsBlockDateMonthIndicates the month of the year during which
the 'after hours block' service is active.ro Enumeration .1.3.6.1.4.1.9.9.439.1.1.28.1.2 |
ccmeAfterHrsBlockDateIndicates the day of the month during which
the 'after hours block' service is activated.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.28.1.3 |
ccmeAfterHrsBlockDateStartHourIndicates the hour of the day during which
the 'after hours block' service is activated.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.28.1.4 |
ccmeAfterHrsBlockDateStartMinIndicates the minute in the
ccmeAfterHrsBlockDateStartHour from which the 'after
hours block' service is activated.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.28.1.5 |
ccmeAfterHrsBlockDateStopHourIndicates the hour of the day during which
during which the 'after hours block' service
is deactivated.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.28.1.6 |
ccmeAfterHrsBlockDateStopMinIndicates the minute in the
ccmeAfterHrsBlockDateStopHour after which the 'after
hours block' service is deactivated.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.28.1.7 |
ccmeAfterHrsBlockDayTableA list of recurring time period based on day of week
during which outgoing calls that match defined block
patterns are blocked on IP phones. SEQUENCE OF CcmeAfterHrsBlockDayEntry .1.3.6.1.4.1.9.9.439.1.1.29 |
ccmeAfterHrsBlockDayEntryInformation on a configured after hour block pattern
day. There is an entry in this table for each entry
that is configured on this device. An entry is deleted
from this table once an 'after hour block' day
configuration is removed from this device. CcmeAfterHrsBlockDayEntry .1.3.6.1.4.1.9.9.439.1.1.29.1 |
ccmeAfterHrsBlockDayIndexAn arbitrary and unique index for this
CcmeAfterHrsBlockDayEntry. Integer32 .1.3.6.1.4.1.9.9.439.1.1.29.1.1 |
ccmeAfterHrsBlockDayIndicates the day of the week during which
the 'after hours block' service is active.ro Enumeration .1.3.6.1.4.1.9.9.439.1.1.29.1.2 |
ccmeAfterHrsBlockDayStartHourIndicates the hour of the day during which
the 'after hours block' service is activated.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.29.1.3 |
ccmeAfterHrsBlockDayStartMinIndicates the minute in the
ccmeAfterHrsBlockDayStartHour from which the 'after
hours block' service is activated.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.29.1.4 |
ccmeAfterHrsBlockDayStopHourIndicates the hour of the day during which
during which the 'after hours block' service
is deactivated.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.29.1.5 |
ccmeAfterHrsBlockDayStopMinIndicates the minute in the
ccmeAfterHrsBlockDayStopHour after which the 'after
hours block' service is deactivated.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.29.1.6 |
ccmeNightServiceCodeIndicates the configured night service
code that disables or enables night service on
IP phones. The code is the digit code that a user
enters at an IP phone to disable or enable
night service. The code begins with '*' (asterisk).ro CcmeNightServiceCodeString .1.3.6.1.4.1.9.9.439.1.1.30 |
ccmeNightServiceDateTableA list of recurring time period based on
date of month during which night service is active. SEQUENCE OF CcmeNightServiceDateEntry .1.3.6.1.4.1.9.9.439.1.1.31 |
ccmeNightServiceDateEntryInformation on a configured night service date pattern.
There is an entry in this table for each entry that is
configured on this device. An entry is deleted from this
table once a night service configuration is removed
from this device. CcmeNightServiceDateEntry .1.3.6.1.4.1.9.9.439.1.1.31.1 |
ccmeNightServiceDateIndexAn arbitrary and unique index for this
CcmeNightServiceDateEntry. Integer32 .1.3.6.1.4.1.9.9.439.1.1.31.1.1 |
ccmeNightServiceDateMonthIndicates the month of the year during which
the night service is active.ro Enumeration .1.3.6.1.4.1.9.9.439.1.1.31.1.2 |
ccmeNightServiceDateIndicates the day of the month during which
the night service is activated.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.31.1.3 |
ccmeNightServiceDateStartHourIndicates the hour of the date during which
the night service is activated.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.31.1.4 |
ccmeNightServiceDateStartMinIndicates the minute in the
ccmeNightServiceDateStartHour during which the
night service is activated.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.31.1.5 |
ccmeNightServiceDateStopHourIndicates the hour of the date during which
during which the night service is deactivated.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.31.1.6 |
ccmeNightServiceDateStopMinIndicates the minute in the
ccmeNightServiceDateStopHour during which the
night service is deactivated.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.31.1.7 |
ccmeNightServiceDayTableA list of recurring time period associated with
a day of the week during which night service is
active. SEQUENCE OF CcmeNightServiceDayEntry .1.3.6.1.4.1.9.9.439.1.1.32 |
ccmeNightServiceDayEntryInformation on a configured night service day
pattern. There is an entry in this table for each
entry that is configured on this device. An entry
is deleted from this table once a night service
configuration is removed from this device. CcmeNightServiceDayEntry .1.3.6.1.4.1.9.9.439.1.1.32.1 |
ccmeNightServiceDayIndexAn arbitrary and unique index for this
CcmeNightServiceDayEntry. Integer32 .1.3.6.1.4.1.9.9.439.1.1.32.1.1 |
ccmeNightServiceDayIndicates the day of the week during which
the night service is active.ro Enumeration .1.3.6.1.4.1.9.9.439.1.1.32.1.2 |
ccmeNightServiceDayStartHourIndicates the hour of the day during which
the night service is activated.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.32.1.3 |
ccmeNightServiceDayStartMinIndicates the minute in the
ccmeNightServiceDayStartHour during which the
night service is activated.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.32.1.4 |
ccmeNightServiceDayStopHourIndicates the hour of the day during which
during which the night service is deactivated.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.32.1.5 |
ccmeNightServiceDayStopMinIndicates the minute in the
ccmeNightServiceDayStopHour during which the
night service is deactivated.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.32.1.6 |
ccmeFXOHookFlashEnabledIndicates whether Flash soft key display on IP Phone
is enabled.
Flash softkey is provided Cisco IP phones 7940 and
7960 users on Foreign Exchange Office (FXO) lines
attached to the Cisco CallManager Express system.
'true' means Flash soft key display on IP Phones is
enabled.
'false' means that the Flash soft key on IP phones
is not displayed in a Cisco CallManager Express system.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.33 |
ccmeSecondaryDialTonePrefixIndicates secondary dial tone access prefix digit
string. If secondary dial tone is not configured on
this device, in such case the object returns a zero
length string. Example - 9.ro CcmeDigitPatternString .1.3.6.1.4.1.9.9.439.1.1.34 |
ccmeWebAdminSystemUserIndicates login username for a Cisco CallManager
Express system administrator.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.1.35 |
ccmeWebAdminCustomerUserIndicates login username for a Cisco CallManager
Express customer administrator.ro SnmpAdminString .1.3.6.1.4.1.9.9.439.1.1.36 |
ccmeSystemMessageIndicates the configured text system message for
display on idle Cisco IP phone 7940's and 7960's in
a Cisco CallManager Express system.
The text message is Alpha numeric string of up
to 32 characters to disply when the phone is idle.ro SnmpAdminString .1.3.6.1.4.1.9.9.439.1.1.37 |
ccmeDialplanPatternTableA list of Dialplan patterns configured
on this device. SEQUENCE OF CcmeDialplanPatternEntry .1.3.6.1.4.1.9.9.439.1.1.38 |
ccmeDialplanPatternEntryInformation on a dialplan pattern configured.
There is an entry in this table for each Dialplan
Pattern that is configured on this device. CcmeDialplanPatternEntry .1.3.6.1.4.1.9.9.439.1.1.38.1 |
ccmeDialplanPatternIndexAn arbitrary and unique index for this
ccmeDialplanPatternTable. Integer32 .1.3.6.1.4.1.9.9.439.1.1.38.1.1 |
ccmeDialplanPatternTagIndicates the number that identifies the
dial-plan pattern.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.38.1.2 |
ccmeDialplanExtLengthIndicates length of digit extension for Dial plan
pattern extension.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.38.1.3 |
ccmeDialplanPatternIndicates string of digits forming a dial-plan
pattern, such as the area code, the prefix,
and the first one or two digits of the extension
number, plus wild card markers or dots (.) for the
remainder of the extension number digits.
Example - 40854.....ro CcmeDigitPatternString .1.3.6.1.4.1.9.9.439.1.1.38.1.4 |
ccmeDialplanExtPatternIndicates string of digits forming the extension
number leading digit pattern that are used when the
leading digits of the extension number are different
from the E.164 telephone number leading digits
defined by the ccmeDialplanPattern object.ro CcmeDigitPatternString .1.3.6.1.4.1.9.9.439.1.1.38.1.5 |
ccmeDialplanAllowRegiEnabledIndicates whether the E.164 number in the dial peer
is allowed to register with the gatekeeper.
'true' means that the registration is allowed.
'false' means that the registration is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.38.1.6 |
ccmeKeepAliveTimeoutIndicates the length of time interval
between successive keepalive messages
from this device to IP phones.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.39 |
ccmeInterDigitTimeoutIndicates the length of time interval
for interdigit timeout for Cisco IP phones.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.40 |
ccmeBusyTimeoutIndicates amount of wait time after which the
call is disconnected from a busy signal.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.41 |
ccmeAlertTimeoutIndicates the length of time interval for which
Cisco CallManager Express allows the IP phone to
alert (ring) if a call is not answered.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.42 |
ccmeEphoneConfTableA list of IP phones (Ephones or EthernetPhones)
configured on this device. SEQUENCE OF CcmeEphoneConfEntry .1.3.6.1.4.1.9.9.439.1.1.43 |
ccmeEphoneConfEntryInformation about a configured IP phone.
There is an entry in this table for each IP Phone
that is configured on this device.
An entry is deleted in this table once an IP Phone
configuration is removed from this device. CcmeEphoneConfEntry .1.3.6.1.4.1.9.9.439.1.1.43.1 |
ccmeEphoneTagAn number that uniquely identifies a IP phone
configured on the device.
The maximum number of Ephone entries varies among
Cisco IOS platforms and may be less than 120. Integer32 .1.3.6.1.4.1.9.9.439.1.1.43.1.1 |
ccmeEphoneIpAddressTypeAddress type of ccmeEphoneIpAddress. Only IPv4 and IPv6
addresses are expected.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.439.1.1.43.1.2 |
ccmeEphoneIpAddressIndicates the designated IP address to this Cisco
IP phone (Ephone) configured on this device.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.439.1.1.43.1.3 |
ccmeEphoneMacAddressThe MAC address of a Cisco IP phone.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.43.1.4 |
ccmeEphoneModelType and model of Cisco IP phone.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.1.43.1.5 |
ccmeEphoneUsernameIndicates the username of the local Cisco
IP phone user. Default is 'Admin'.
The login account allows a phone user to
access a web-based GUI to view information
and change some personal settings for the
phone user's own phone only. A login account
is also required for users of Telephony
Application Programming Interface (TAPI)
aware PC applications, which can register
with this device and exercise
remote-control operations of Cisco IP phones.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.1.43.1.6 |
ccmeEphoneKeepAliveIndicates the time interval between successive
keepalive messages from this device to this
particular IP phone.
If the router fails to receive three successive
keepalive messages, it considers the phone to be
out of service until the phone re-registers.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.43.1.7 |
ccmeEphoneAutoLineOutIndicates the line (Ephone-DN) that will be selected
for out going calls when this Cisco IP phone
goes off-hook.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.43.1.8 |
ccmeEphonePagingDnIndicates the audio paging DN group configured
for this Cisco IP phone.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.43.1.9 |
ccmeEphoneAddonIndicates the number of add on modules (Cisco
IP phone 7914) that are attached to this phone.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.43.1.10 |
ccmeEphoneTemplateIndicates the Ephone template tag associated
with this IP phone.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.43.1.11 |
ccmeEphonePagingPolicyIndicates paging mechanism associated with this
Cisco IP phone.
unicast(1) - Indicates the Cisco IP phone is not
capable of receiving audio paging through
multicast and requests that all pages to
this phone be sent through unicast.
multicast(2) - Audio paging is transmitted to the Cisco
IP phone using multicast.ro Enumeration .1.3.6.1.4.1.9.9.439.1.1.43.1.12 |
ccmeEphoneKeyPhoneIndicates whether the phone is marked as 'Key'
IP phone.
'true' indicates IP phone is configured as Key
IP phone.
'false' indicates IP phone is not configured as
key IP phone.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.43.1.13 |
ccmeEphoneAutoLineInEnabledIndicates automatic line (Ephone-Dn) selection for
incoming call is available.
'true' indicates automatic line selection for
incoming calls is enabled.
'false' indicates auto-line selection for incoming
calls on this Cisco IP phone is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.43.1.14 |
ccmeEphoneAftHrsBlkExmptEnabledIndicates whether this Cisco IP phone is exempt
from after-hours blocking.
'true' indicates this Cisco IP phone is exempt
from after-hour blocking.
'false' indicates is this Cisco IP phone is included
in after-hour blocking.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.43.1.15 |
ccmeEphoneNightBellSvcEnabledIndicates night-bell service is available on this
Cisco IP Phone.
'true' indicates night-bell service is enabled for
this IP phone.
'false' indicates night-bell service is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.43.1.16 |
ccmeEphoneKeepConfEnabledIndicates whether the call would be disconnected
when conference initiator hangs-up.
'true' - Indicates not to disconnect conference when
conference initiator hangs-up.
Connect remaining parties together
directly using call transfer.
'false' - Disconnect conference when initiator
hangs-up.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.43.1.17 |
ccmeEphonePrimaryDnThis object indicates the primary extension DN (Ephone-Dn) for
this Cisco IP phone.
Zero value indicates no primary extension DN is set for this IP
phonero Unsigned32 .1.3.6.1.4.1.9.9.439.1.1.43.1.18 |
ccmeEMUserProfileTagThis object indicates the user profile tag for this Cisco
Extension Mobility IP phone.
Zero value indicates no user logs into this phone.ro Unsigned32 .1.3.6.1.4.1.9.9.439.1.1.43.1.19 |
ccmeEMLogOutProfileTagThis object indicates the logout profile tag configured for
this Cisco Extension Mobility IP phone.
Zero value indicates this phone is not an Extension Mobility
phone.ro Unsigned32 .1.3.6.1.4.1.9.9.439.1.1.43.1.20 |
ccmeEphoneSpeedDialConfTableInformation about configured speed dial entries
for all IP phones. SEQUENCE OF CcmeEphoneSpeedDialConfEntry .1.3.6.1.4.1.9.9.439.1.1.44 |
ccmeEphoneSpeedDialConfEntryInformation about all configured speed dial
entries for an IP phone.
There is an entry created for each Speed Dial
configured on this device. An entry is deleted
from this table when the speed dial configuration
is removed. CcmeEphoneSpeedDialConfEntry .1.3.6.1.4.1.9.9.439.1.1.44.1 |
ccmeEphoneSpeedDialTableIndexAn arbitrary and unique index for this
CcmeEphoneSpeedDialConfEntry. Integer32 .1.3.6.1.4.1.9.9.439.1.1.44.1.1 |
ccmeEphoneSpeedDialTagAn unique identifier tag configured for a
speed-dial entry.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.44.1.2 |
ccmeEphoneSpeedDialNumberThis object indicates the configured speed dial
E.164 phone extension number that is associated
with a line (ephone-dn) on this Cisco IP phone.ro CcmeDigitPatternString .1.3.6.1.4.1.9.9.439.1.1.44.1.3 |
ccmeEphoneSpeedDialLabelIndicates the text to be displayed next to the
speed-dial button on Cisco IP Phone.ro SnmpAdminString .1.3.6.1.4.1.9.9.439.1.1.44.1.4 |
ccmeEphoneFastDialConfTableInformation about configured fast dial entries
for all IP phones. SEQUENCE OF CcmeEphoneFastDialConfEntry .1.3.6.1.4.1.9.9.439.1.1.45 |
ccmeEphoneFastDialConfEntryInformation about all configured fast dial
entries for an IP phone.
There is an entry created in this table for
each Fast dial configured on this device.
An entry is deleted from this table when Fast
dial configuration is removed from this device. CcmeEphoneFastDialConfEntry .1.3.6.1.4.1.9.9.439.1.1.45.1 |
ccmeEphoneFastDialTableIndexAn arbitrary and unique index for this
CcmeEphoneFastDialConfEntry. Integer32 .1.3.6.1.4.1.9.9.439.1.1.45.1.1 |
ccmeEphoneFastDialNumberThis object indicates the configured fast dial
E.164 phone extension number that is
associated with this Cisco IP phone.
No primary number is associated as a default.ro CcmeDigitPatternString .1.3.6.1.4.1.9.9.439.1.1.45.1.2 |
ccmeEphoneFastDialNameThis object indicates the configured name associated
with this fast dial E.164 phone extension number that
is associated with this Cisco IP phone.
When no name is associated, in that
case this object will return a string length of zero.ro SnmpAdminString .1.3.6.1.4.1.9.9.439.1.1.45.1.3 |
ccmeEphoneBtnDNAssocConfTableInformation about all configured DN and button
association for all IP phones. SEQUENCE OF CcmeEphoneBtnDNAssocConfEntry .1.3.6.1.4.1.9.9.439.1.1.46 |
ccmeEphoneBtnDNAssocConfEntryInformation about a configured DN and button
association entries for an IP phone.
There is an entry in this table for each DN and
button association that is configured on
this device.
An entry is deleted once the configuration is
deleted from this device. CcmeEphoneBtnDNAssocConfEntry .1.3.6.1.4.1.9.9.439.1.1.46.1 |
ccmeEphoneButtonNumberThe button number of an IP phone. Integer32 .1.3.6.1.4.1.9.9.439.1.1.46.1.1 |
ccmeEphoneOverlayDNThis object indicates the overlay DN's configured
for this button on this IP phone.ro SnmpAdminString .1.3.6.1.4.1.9.9.439.1.1.46.1.2 |
ccmeEphoneDnConfigTableA list of configured Ephone-DN's (Directory Number
or extensions) for Cisco IP phone lines on this device. SEQUENCE OF CcmeEphoneDnConfigEntry .1.3.6.1.4.1.9.9.439.1.1.47 |
ccmeEphoneDnConfigEntryInformation about each configured extension/DN.
There is an entry in this table for each Ephone DN
configured on this device. In SRST (Survivable Remote
Site Telephone) mode, an entry is created for each
Ephone-DN automatically generated. An entry is deleted
from this table if the Ephone-DN is un-configured
on this device. CcmeEphoneDnConfigEntry .1.3.6.1.4.1.9.9.439.1.1.47.1 |
ccmeEphoneDnTagA unique sequence number that indicates an Cisco
IP phone extension (ephone-dn) configured on
this device. Integer32 .1.3.6.1.4.1.9.9.439.1.1.47.1.1 |
ccmeEphoneDnTypeExtension type of the line.
extension(1) - Cisco IP Phone line.
intercom(2) - Part of pair of intercom line.
paging(3) - type to receive audio pages.
moh(4) - type to address MoH.
mwi(5) - type to address MWI.
parkslot(6) - type to address call park slot.
loopback(7) - loopback directory number.ro Enumeration .1.3.6.1.4.1.9.9.439.1.1.47.1.2 |
ccmeEphoneDnModeMode of the line.
single(1) - Single line mode.
dual(2) - Dual line mode, that has one virtual
voice port and two channels to handle
two independent calls. This capacity
allows call waiting, call transfer
and conference functions within a
single line (ephone-dn).ro Enumeration .1.3.6.1.4.1.9.9.439.1.1.47.1.3 |
ccmeEphoneDnPriNumIndicates the primary E.164 phone
extension number that is associated with a line
(ephone-dn) on this device.
No primary number is associated as a default.ro SnmpAdminString .1.3.6.1.4.1.9.9.439.1.1.47.1.4 |
ccmeEphoneDnSecNumIndicates the second E.164 phone extension number
that is associated with a line (ephone-dn)
on this device.ro SnmpAdminString .1.3.6.1.4.1.9.9.439.1.1.47.1.5 |
ccmeEphoneDnNameIndicates the name of the person
associated with this extension (ephone-dn).
If no specific name of person is associated with
the IP phone, then this object will contain
a zero-length string.ro SnmpAdminString .1.3.6.1.4.1.9.9.439.1.1.47.1.6 |
ccmeEphoneDnLabelIndicates the text string that
is displayed on the Cisco IP phone console
instead of the extension phone number.ro SnmpAdminString .1.3.6.1.4.1.9.9.439.1.1.47.1.7 |
ccmeEphoneDnPriPrefThis object shows the preference
for the primary number associated with
an extension.
Range is from 0 to 10, where 0 is highest
and 10 is lowest.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.47.1.8 |
ccmeEphoneDnSecPrefThis object shows the preference
for the secondary number associated with
an extension.
Range is from 0 to 10, where 0 is highest
and 10 is lowest.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.47.1.9 |
ccmeEphoneDnCFBusyNumThis object indicates the E.164 phone number
to which calls are forwarded for all the incoming
calls to busy extension.
If no specific call forwarding phone number
is associated with the IP phone, then this object
will contain a zero-length string.ro SnmpAdminString .1.3.6.1.4.1.9.9.439.1.1.47.1.10 |
ccmeEphoneDnCFAllNumIndicates the E.164 phone number
to which calls are forwarded for all the incoming
calls to an extension (ephone-dn).
If no specific call forwarding all phone number is
associated with the IP phone, then this object
will contain a zero-length string.ro SnmpAdminString .1.3.6.1.4.1.9.9.439.1.1.47.1.11 |
ccmeEphoneDnCFNoAnNumIndicates the E.164 phone number
to which calls are forwarded for all the incoming
calls to an extension (ephone-dn) that does not
answer.
If no specific call forwarding number when extension
does not answer is associated, then this object
will contain a zero-length string.ro SnmpAdminString .1.3.6.1.4.1.9.9.439.1.1.47.1.12 |
ccmeEphoneDnCFNoAnToIndicates the duration that a call can ring
with no answer before the call is forwarded to
another extension/line/DN.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.47.1.13 |
ccmeEphoneDnMwiCapabilityIndicates the capability of an extension (ephone-dn)
to process message-waiting indication (MWI)
notification from an external voice-messaging systems.
mwiOn - Extension can process MWI ON notifications
using either the main or secondary phone number.
mwiOff - Extension can process MWI OFF notifications
using either the main or secondary phone number.
mwiOnOff - Extension can process both MWI ON and OFF
notifications using either the main or
secondary phone number.
mwiDisabled - MWI notifications are disabled on
an extension.ro Enumeration .1.3.6.1.4.1.9.9.439.1.1.47.1.14 |
ccmeEphoneDnHuntstopIndicates the call hunting behavior for an extension
(ephone-dn). If the value of this object is 'true',
an incoming call does not roll over (hunt) to another
ephone-dn if the called ephone-dn is busy or does not
answer and a hunting strategy has been established that
includes this ephone-dn.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.47.1.15 |
ccmeEphoneDnHuntstopChIndicates the call hunting behavior for an
extension (ephone-dn) channel. If this object
is enabled on dual-line extensions, an incoming
call does not roll over (hunt) to another
channel if the first channel is busy or does not
answer on this ephone-dn.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.47.1.16 |
ccmeEphoneDnHoldAltToIndicates time out for repeating audible alert
notification when a call is on hold on a Cisco IP
phone.
Range is 15 to 300.
By default hold alert feature is disabled.
In such case, this object will return a zero value.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.47.1.17 |
ccmeEphoneDnHoldAltTypeIndicates when hold alert audible notification will
be repeated on a Cisco IP phone.
idle(1) - Alerts only when the Cisco IP phone is idle.
originator(2) - Alerts when the Cisco IP phone is idle
or busy.
shared(3) - Alerts only when the Cisco IP phone is idle
but alerts all phones that share the line.ro Enumeration .1.3.6.1.4.1.9.9.439.1.1.47.1.18 |
ccmeEphoneDnMwiSipSubscrEnabledIndicates whether this extension (DN) in a
Cisco CallManager Express system is subscribed
to a SIP-based MWI server.
'true' indicates this extension can receive MWI
from SIP-based MWI server.
'false' indicates extension is not subscribed
to receive MWI.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.47.1.19 |
ccmeEphoneDnScriptNameIndicates the session-level IVR application script
in Tool Command Language (TCL) for this extension
(ephone-dn) in CCME system.
By default no application script is selected for
an extension and the object length in this case
will return a string of zero length.ro SnmpAdminString .1.3.6.1.4.1.9.9.439.1.1.47.1.20 |
ccmeNotificationEnableThis variable indicates whether the system produces the
Cisco CallManager Express notifications.
When this variable is 'true', generation of
CCME notifications are enabled.
When this variable is 'false', generation of
CCME notifications is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.48 |
ccmeSysTrapSeverityThe internally-defined severity of the particular alarm
condition, associated with the most recent notification.
A subsequent event in which the alarm condition changes
from its failed state back to a 'normal' state has a
severity of 'clear'.ro Enumeration .1.3.6.1.4.1.9.9.439.1.1.49 |
ccmeSysNotificationReasonThe internally-defined failure cause of the particular
alarm condition, associated with the most recent trap.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.1.50 |
ccmeEphoneUnRegThresholdThis variable sets the threshold to limit the
unregistration trap notification.rw Integer32 .1.3.6.1.4.1.9.9.439.1.1.51 |
ccmeEphoneTrapReasonThe internally-defined failure cause of the particular
alarm condition, associated with the most recent Ephone
trap.ro SnmpAdminString .1.3.6.1.4.1.9.9.439.1.1.52 |
ccmeUserAutoLogoutToIndicates the length of time before the users of
IP phones in a Cisco CallManager Express system are
automatically logged out.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.53 |
ccmeUserLoginDeactivateTimeIndicates the specified time of day when user logins
for all IP phones are deactivated.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.1.54 |
ccmeMwiSipServerIpAddressIndicates the designated IP address to an external
SIP based message-waiting indication (MWI) server.
The type of this address is determined by the
value of the ccmeSysIPAddressType object.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.439.1.1.55 |
ccmeMwiSipServerTransportTypeIndicates the transport layer protocol used to
connect external SIP-based message-waiting
indication (MWI) server.
tcp(1) - TCP as transport layer protocol.
udp(2) - UDP as transport layer protocol.ro Enumeration .1.3.6.1.4.1.9.9.439.1.1.56 |
ccmeMwiSipServerPortNumberIndicates the port number for the message-waiting
indication (MWI) server.ro InetPortNumber .1.3.6.1.4.1.9.9.439.1.1.57 |
ccmeMwiSipServerRegE164EnabledIndicates whether E.164 number is registered with
SIP proxy or Registrar rather than an extension number.
'true' indicates E.164 is registered.
'false' indicates extension number is registered.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.58 |
ccmeMwiSipSvrUnsolicitedEnabledIndicates whether SIP NOTIFY for MWI is sent
without a SUBSCRIBE from the Cisco CallManager Express.
'true' indicates SIP NOTIFY is sent without SIP
SUBSCRIBE.
'false' indicates solicited NOTIFY is sent.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.59 |
ccmeCorConfTableA list of Class of Restriction (COR) configured
on this device. SEQUENCE OF CcmeCorConfEntry .1.3.6.1.4.1.9.9.439.1.1.60 |
ccmeCorConfEntryInformation about a Class of restriction (COR)
configured entry.
There is an entry for each COR configured on
this device. An entry is deleted if the COR is
removed from configuration. CcmeCorConfEntry .1.3.6.1.4.1.9.9.439.1.1.60.1 |
ccmeCorTableIndexAn arbitrary and unique index for this
CcmeCorConfEntry. Unsigned32 .1.3.6.1.4.1.9.9.439.1.1.60.1.1 |
ccmeCorTagIndicates the tag number.
If ccmeEnabled object is 'true' for Cisco
CallManager Express Mode then this object
indicates the ephone-dn tag under which the
COR was configured.
If csrstEnabled object is 'true' for Cisco
Survivable Remote Site Telephony (SRST) mode,
then this object indicates the COR list
identifier configured under SRST configuration
or Voice Registrar configuration.ro Unsigned32 .1.3.6.1.4.1.9.9.439.1.1.60.1.2 |
ccmeCorListNameIndicates the COR list name configured
on this device.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.1.60.1.3 |
ccmeCorScopeIndicates the scope of this COR list for a
list of associated dial-peers.
ccme(1) - indicates this COR is applicable to
the dial-peer associated with ciscoCorTag
Ephone-DN object.
srstSccp(2) - indicates this COR is applicable to
all the dynamically created dial-peers
under SCCP SRST mode.
srstSip(3) - indicates this COR is applicable to
all the SIP SRST dial-peers that belong
to a specified voice registrar pool
indicated by ciscoCorVoiceRegPoolNumber
object.ro Enumeration .1.3.6.1.4.1.9.9.439.1.1.60.1.4 |
ccmeCorDirectionIndicates whether the COR will be used by
incoming or outgoing dial peers.ro Enumeration .1.3.6.1.4.1.9.9.439.1.1.60.1.5 |
ccmeCorStartingNumberIndicates the starting number of
a range of directory numbers for
a COR list configured on this
device.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.1.60.1.6 |
ccmeCorEndingNumberIndicates the ending number of
a range of directory numbers for
a COR list configured on this
device.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.1.60.1.7 |
ccmeCorVoiceRegPoolNumberIndicates the voice registrar pool
number under which this COR list is
applied.ro Unsigned32 .1.3.6.1.4.1.9.9.439.1.1.60.1.8 |
ccmeCorListDefaultEnabledIndicates whether the default COR list
is enabled or disabled for this COR entry.
'true' indicates this COR list assumes behavior
of a pre-defined default COR list.
'false' indicates default COR list is not
applied.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.60.1.9 |
ccmeLoopbackDnConfTableA list of loopback DN's (lines) configured
on this device. SEQUENCE OF CcmeLoopbackDnConfEntry .1.3.6.1.4.1.9.9.439.1.1.61 |
ccmeLoopbackDnConfEntryInformation about a loopback DN configured
on this device.
There is an entry created for each loopback
DN configured on this device. An entry is deleted
if the loopback DN is removed from this device
configuration. CcmeLoopbackDnConfEntry .1.3.6.1.4.1.9.9.439.1.1.61.1 |
ccmeLoopbackDnTagA unique sequence number that identifies the
ephone-dn loopback pairs in this device. Unsigned32 .1.3.6.1.4.1.9.9.439.1.1.61.1.1 |
ccmeLoopbackDnforwardIndicates the number of digits in the original
called number that will be forwarded to the other
phone-dn in the loopback-dn pair.ro Unsigned32 .1.3.6.1.4.1.9.9.439.1.1.61.1.2 |
ccmeLoopbackDnStripIndicates the number of leading digits that will
be stripped from the original called number that
will be forwarded to the other phone-dn in the
loopback-dn pair.ro Unsigned32 .1.3.6.1.4.1.9.9.439.1.1.61.1.3 |
ccmeLoopbackDnPrefixIndicates the string of digits that will be added
in the front of the forwarded called number.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.1.61.1.4 |
ccmeLoopbackDnSuffixIndicates the string of digits that will be added
in the end of the forwarded called number.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.1.61.1.5 |
ccmeLoopbackDnRetryToIndicates the number of seconds to wait before
retrying the loopback target when it is busy
or unavailable.
A zero-value indicates that retry is disabled and
appropriate call-progress tones are passed to the
call originator.ro Integer32 .1.3.6.1.4.1.9.9.439.1.1.61.1.6 |
ccmeLoopbackDnAutoConIndicates whether the automatic connection
capability for the call during far-end alert.
'true' indicates call is immediately connected and
in-band alerting is provided while waiting
for the far-end destination to answer.
'false' indicates automatic connection is disabled.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.61.1.7 |
ccmeLoopbackDnCodecThe codec type applied to the calls that pass through
the loopback-dn.
g711alaw(1) - indicates the G.711 a-law is applied.
g711ulaw(2) - indicates the G.711 mu-law is applied.
Option 1 and 2 overrides the G.711 codec
type that is negotiated for the call and
provides mu-law to a-law conversion
if needed.
default(3) - indicates the Real-Time Transport Protocol
(RTP) voice packets are passed through the
loopback-dn without considering the G.711
coding type negotiated for the calls.ro Enumeration .1.3.6.1.4.1.9.9.439.1.1.61.1.8 |
ccmeIntercomDnConfTableA list of intercom DN's (lines) configured
on this device. SEQUENCE OF CcmeIntercomDnConfEntry .1.3.6.1.4.1.9.9.439.1.1.62 |
ccmeIntercomDnConfEntryInformation about a intercom DN configured
on this device.
There is an entry created for each intercom
DN configured on this device. An entry is deleted
if the intercom DN is removed from this device
configuration. CcmeIntercomDnConfEntry .1.3.6.1.4.1.9.9.439.1.1.62.1 |
ccmeIntercomDnTagIndicates Ephone-DN (line) tag number under
which this Intercom was configured. Unsigned32 .1.3.6.1.4.1.9.9.439.1.1.62.1.1 |
ccmeIntercomDnExtensionNumIndicates the telephone number to which intercom
calls are placed.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.1.62.1.2 |
ccmeIntercomDnBargeInEnabledIndicates whether the inbound intercom calls
behavior when existing call is active.
'true' indicates inbound intercom calls force the
existing call into call-hold state and allows the
intercom call to be answered immediately.
'false' indicates inbound intercom calls don't
barge-in the existing calls.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.62.1.3 |
ccmeIntercomDnAutoAnsEnabledIndicates whether the auto-answer feature is
applied to this EPhone-DN.
'true' indicates auto-answer feature is enabled.
'false' indicates auto-answer feature is disabled.
This indicates the Ephone-DN a connection that
resembles a private line, automatic ringdown
(PLAR).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.1.62.1.4 |
ccmeIntercomDnLabelIndicates the label for the intercom configured
on this device.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.1.62.1.5 |
ccmeMohMulticastIpAddressThis object indicates the destination IP address
for multicast of the Music-on-hold audio stream.
The type of this address is determined by the
value of the ccmeSysIPAddressType object.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.439.1.1.63 |
ccmeMohMulticastPortNumberThis object indicates the media port for multicast
of the Music-oh-hold audio stream.ro InetPortNumber (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.439.1.1.64 |
ccmeMohMulticastRouteIndicates a string of IP addresses, each separate
by other by a space, over which Music-oh-hold IP
multicast packets are transmitted.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.1.65 |
ccmeMohFlashMulticastIPAddrTypeAddress type of ccmeMohFlashMulticastIPAddr.
Only IPv4 and IPv6 addresses are expected.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.439.1.1.66 |
ccmeMohMulticastIpAddressTypeAddress type of ccmeMohMulticastIpAddress.
Only IPv4 and IPv6 addresses are expected.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.439.1.1.67 |
ccmeEMUserDirNumConfTableA list of Directory Number or extensions configured under user
profile which are downloaded to Cisco IP extension mobility
phones when an user log into it using this user profile. SEQUENCE OF CcmeEMUserDirNumConfEntry .1.3.6.1.4.1.9.9.439.1.1.68 |
ccmeEMUserDirNumConfEntryInformation about each directory number configured under user
profile to be downloaded to an extension mobility IP phone when
an user logs into it using this user profile.
There is an entry in this table for each line on the logged in
ephone. CcmeEMUserDirNumConfEntry .1.3.6.1.4.1.9.9.439.1.1.68.1 |
ccmEMUserProfileDirNumIndexA number that uniquely identifies an Extension Mobility user
profile. Integer32 .1.3.6.1.4.1.9.9.439.1.1.68.1.1 |
ccmeEMUserDirNumTagA number that uniquely identifies a directory number entry. Integer32 .1.3.6.1.4.1.9.9.439.1.1.68.1.2 |
ccmeEMUserDirNumThis object indicates the E.164 phone diretory or
extension number which is downloaded to a line on the extension
mobility phone when an user logs into it.ro CcmeDigitPatternString .1.3.6.1.4.1.9.9.439.1.1.68.1.3 |
ccmeEMUserDirNumOverlayThis object indicates the overlay directory number configured
for this line under this user profile.ro SnmpAdminString .1.3.6.1.4.1.9.9.439.1.1.68.1.4 |
ccmeEMLogoutDirNumConfTableA list of Directory Number or extensions configured under
logout profile which are downloaded to Cisco IP extension
mobility phones when an user log out or no one is logged in. SEQUENCE OF CcmeEMLogoutDirNumConfEntry .1.3.6.1.4.1.9.9.439.1.1.69 |
ccmeEMLogoutDirNumConfEntryInformation about each directory number configured under logout
profile to be downloaded to an extension mobility IP phone at
logout state.
There is an entry in this table for each line on the ephone at
logout state.
There is an entry in this table for each logout profile. CcmeEMLogoutDirNumConfEntry .1.3.6.1.4.1.9.9.439.1.1.69.1 |
ccmEMLogOutProfileDirNumIndexA number that uniquely identifies an Extension Mobility logout
profile. Integer32 .1.3.6.1.4.1.9.9.439.1.1.69.1.1 |
ccmeEMLogoutDirNumTagA number that uniquely identifies a directory number entry. Integer32 .1.3.6.1.4.1.9.9.439.1.1.69.1.2 |
ccmeEMLogoutDirNumThis object indicates the E.164 phone diretory or extension
number which is downloaded to a line on the extension mobility
phone at the logout state.ro CcmeDigitPatternString .1.3.6.1.4.1.9.9.439.1.1.69.1.3 |
ccmeEMLogoutDirNumOverlayThis object indicates the overlay directory number configured
for this line under this logout profile.ro SnmpAdminString .1.3.6.1.4.1.9.9.439.1.1.69.1.4 |
ccmeActiveStats OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.439.1.2 |
ccmeEphoneCallLegsIndicates the active number of call legs
contributed from the Cisco IP Phones and TAPI
clients interacting with this device at this
instance.ro Gauge32 .1.3.6.1.4.1.9.9.439.1.2.1 |
ccmeEphoneTotIndicates the total number of Cisco IP phones
(Ephones) seen by this device since the last reset.ro Counter32 .1.3.6.1.4.1.9.9.439.1.2.2 |
ccmeEphoneTotRegisteredIndicates the total number of Cisco IP phones
currently registered to this device.ro Gauge32 .1.3.6.1.4.1.9.9.439.1.2.3 |
ccmeEphoneTotKeyPhConfiguredIndicates the total number of configured Cisco
IP phones that are marked as Key phones on this
device.ro Gauge32 .1.3.6.1.4.1.9.9.439.1.2.4 |
ccmeEphoneTotKeyPhRegisteredIndicates the total number of Key Cisco IP phones
currently registered to this device.ro Gauge32 .1.3.6.1.4.1.9.9.439.1.2.5 |
ccmeEphoneActTableA list of all IP phones currently registered
on this device. SEQUENCE OF CcmeEphoneActEntry .1.3.6.1.4.1.9.9.439.1.2.6 |
ccmeEphoneActEntryInformation about an IP phone seen by this device.
There is an entry added for each new IP phone
registration in this table. Entry is removed
once the phone is deceased or re-registered. CcmeEphoneActEntry .1.3.6.1.4.1.9.9.439.1.2.6.1 |
ccmeEphoneDeviceNameType and model of Cisco IP phone as seen in the
registration on this device.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.2.6.1.1 |
ccmeEphoneRegStateThe registration state of the Cisco IP phone.
registered(1) - indicates the phone is active.
unregistered(2) - indicates the connection to Cisco
IP phone was closed in normal manner.
deceased(3) - indicates the connection to the Cisco
IP phone was closed because of a
keep-alive timeout.ro Enumeration .1.3.6.1.4.1.9.9.439.1.2.6.1.2 |
ccmeEphoneActiveDNCurrent active DN (line) on the IP phone.ro Integer32 .1.3.6.1.4.1.9.9.439.1.2.6.1.3 |
ccmeEphoneActivityStatusCurrent status of the Cisco IP phone as seen
on this device.
onhook(1) - Phone is on-hook.
offhook(2) - Phone is off-hook.
ringing(3) - Phone is ringing.
paging(4) - Phone is receiving an audio page.ro Enumeration .1.3.6.1.4.1.9.9.439.1.2.6.1.4 |
ccmeEphoneKeepAliveCntNumber of keepalive messages received from
the Cisco IP phone by this device since
the phone registered.ro Counter32 .1.3.6.1.4.1.9.9.439.1.2.6.1.5 |
ccmeEphonePendingResetPending reset operation on this IP phone as seen
by this device. True indicating reset is pending.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.2.6.1.6 |
ccmeEphoneRegTimeTime this phone registered to this device.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.2.6.1.7 |
ccmeEphoneCurrentFirmwareRevThe current vendor-specific firmware version
string provided by the Cisco IP phone during
registration on this device.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.2.6.1.8 |
ccmeEphonePreviousFirmwareRevThe previous vendor-specific firmware version
of Cisco IP phone provided by the Cisco IP phone
during registration on this device.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.2.6.1.9 |
ccmeEphoneLastErrorReason for last reset of the phone as seen
by this device. Reason for last reset of phone
could be 'TCP-timeout' or 'CallManager-closed-TCP'
or 'Initialized'.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.2.6.1.10 |
ccmeEphoneObservedTypeType and model of Cisco IP phone received
by this device during the registration of IP phone.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.439.1.2.6.1.11 |
ccmeEphoneLoginStatusTrue indicates that a phone user is currently
logged in on this phone. False indicates no phone
user currently logged in on this phone.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.2.6.1.12 |
ccmeEphoneDnDStatusTrue indicates that phone is set do-not-disturb (DnD)
on one or more of the phone's extensions used by
the Cisco IP phone. False indicates no DnD is set.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.2.6.1.13 |
ccmeEphoneDebugStatusTrue indicates that phone is set in debug mode.
False indicates no debug is disabled on this IP phone.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.2.6.1.14 |
ccmeEphoneMediaActiveTrue indicates that phone is in active conversation.
False indicates no conversation is ongoing.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.2.6.1.15 |
ccmeEphoneTAPIClientTrue indicates that phone is a TAPI client.
False indicates the phone is not TAPI client.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.2.6.1.16 |
ccmeEphoneMediaCapabilityIndicates whether the registered IP phone is
capable of supporting audio or video.
audioOnly(1) - IP phone is only audio capable.
audioVideo(2) - IP phone is audio and video capable.ro Enumeration .1.3.6.1.4.1.9.9.439.1.2.6.1.17 |
ccmeEphoneRemoteTrue indicates that phone is suspected not to
be on the local area network(LAN). This is derived
from the ARP entry not seen on this device.
False indicates the phone is in the same LAN as
device.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.2.6.1.18 |
ccmeMohSourceCisco CallManager Express system can derive
music-on-hold (MOH) from two locations.
If flash (1) is displayed, the router is currently
picking MOH stream from an audio file configured
in flash file system. The location of the file is
provided by ccmeMohFlashFile object.
If liveFeed (2) is displayed, the router is
currently picking MOH stream from an incoming call
audio stream. Normally, a single ephone-dn would
be configured to accept liveFeed call.
ccmeEphoneDnType with moh type will specify this DN.ro Enumeration .1.3.6.1.4.1.9.9.439.1.2.7 |
ccmeNightServiceEnabledIndicates the current Night service state.
'true' means that Night service is active.
'false' means that Night service is inactive.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.439.1.2.8 |
ccmeEMphoneTotIndicates the total number of Cisco IP Extension Mobility
phones
(EMphones) seen by this device since the last reset.ro Counter32 .1.3.6.1.4.1.9.9.439.1.2.9 |
ccmeEMphoneTotRegisteredThis object indicates the total number of Cisco IP Extension
Mobility phones registered to this CCME.ro Gauge32 .1.3.6.1.4.1.9.9.439.1.2.10 |
ccmeHistoryStats OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.439.1.3 |
ccmeEphoneDnChStatsHistoryTableA list of statistics for all Ephone-DN's (lines)
on this device. SEQUENCE OF CcmeEphoneDnChStatsHistoryEntry .1.3.6.1.4.1.9.9.439.1.3.1 |
ccmeEphoneDnChStatsHistoryEntryStatistical information about an Ephone-DN.
There is an entry added for each new Ephone-DN
configured in this table. Entry is removed
once the Ephone-DN is removed from this device
configuration. CcmeEphoneDnChStatsHistoryEntry .1.3.6.1.4.1.9.9.439.1.3.1.1 |
ccmeEphoneDnChNumThe Ephone-DN (line) channel number for this entry. Integer32 .1.3.6.1.4.1.9.9.439.1.3.1.1.1 |
ccmeEphoneDnChIncomingTotal number of incoming calls received by
this Ephone-DN (line) channel.ro Counter32 .1.3.6.1.4.1.9.9.439.1.3.1.1.2 |
ccmeEphoneDnChInAnsweredTotal number of incoming calls answered by this
Ephone-DN (line) channel.ro Counter32 .1.3.6.1.4.1.9.9.439.1.3.1.1.3 |
ccmeEphoneDnChOutboundTotal number of calls placed by this
Ephone-DN (line) channel.ro Counter32 .1.3.6.1.4.1.9.9.439.1.3.1.1.4 |
ccmeEphoneDnChOutAnsweredTotal number of calls that were placed and
answered by this Ephone-DN (line) channel.ro Counter32 .1.3.6.1.4.1.9.9.439.1.3.1.1.5 |
ccmeEphoneDnChOutBusyTotal number of calls that were placed from
this channel and were not answered because
of busy line.ro Counter32 .1.3.6.1.4.1.9.9.439.1.3.1.1.6 |
ccmeEphoneDnChDiscAtConnTotal number of calls that were placed from
this channel and were disconnected during
call setup.ro Counter32 .1.3.6.1.4.1.9.9.439.1.3.1.1.7 |
ccmeEphoneDnChDiscAtAlertTotal number of calls that were placed from
this channel and were disconnected during
call alerting stage.ro Counter32 .1.3.6.1.4.1.9.9.439.1.3.1.1.8 |
ccmeEphoneDnChDiscAtHoldTotal number of calls that were placed from
this channel and were disconnected during
call was put on hold.ro Counter32 .1.3.6.1.4.1.9.9.439.1.3.1.1.9 |
ccmeEphoneDnChDiscAtRingTotal number of calls that were received on
this channel and were disconnected during
alerting state.ro Counter32 .1.3.6.1.4.1.9.9.439.1.3.1.1.10 |
ccmeEphoneDnChDiscCauseNearEndThe last near end disconnect cause code
seen by this channel.ro Integer32 .1.3.6.1.4.1.9.9.439.1.3.1.1.11 |
ccmeEphoneDnChDiscCauseFarEndThe last far end disconnect cause code
seen by this channel.ro Integer32 .1.3.6.1.4.1.9.9.439.1.3.1.1.12 |
ciscoCcmeMIBConform OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.439.2 |
ciscoCcmeMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.439.2.1 |
ciscoCcmeMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.439.2.2 |