CISCO-CALLHOME-MIB
AI MIB Summary
The CISCO-CALLHOME-MIB manages the Cisco Call Home architecture on Cisco hardware to automate the transmission of hardware failure diagnostics, system health metrics, and performance accounting data to remote support centers. This module enables the configuration and monitoring of automatic alert generation and secure data transport for proactive troubleshooting and hardware replacement workflows.
The MIB module for the management of Call Home feature within the framework of Cisco's Call Home architecture. Customers deploying solutions to run mission critical applications such as storage solutions demand very high availability and Serviceability from their products and/or support partners. To meet these requirements, a feature called 'Call Home' is provided which allows the system experiencing Hardware/Software problems to automatically send the relevant failure information back to the Support Center at the Support Partners for troubleshooting or to get replacement hardware dispatched. This feature also provides advanced features that allow storage systems to send performance, accounting and system health information in addition to just the fault information.
Main OID:
ciscoCallHomeMIB.1.3.6.1.4.1.9.9.300
198
Objects
Active
Status
10
Dependencies
Imported Objects
Objects
198 total| Object Name |
|---|
ciscoCallHomeMIBThe MIB module for the management of Call Home feature
within the framework of Cisco's Call Home architecture.
Customers deploying solutions to run mission critical
applications such as storage solutions demand very high
availability and Serviceability from their products
and/or support partners.
To meet these requirements, a feature called
'Call Home' is provided which allows the system
experiencing Hardware/Software problems to
automatically send the relevant failure information
back to the Support Center at the Support Partners for
troubleshooting or to get replacement hardware
dispatched. This feature also provides advanced
features that allow storage systems to send
performance, accounting and system health information
in addition to just the fault information. MODULE-IDENTITY .1.3.6.1.4.1.9.9.300 |
ccmCallHomeNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.0 |
ccmSmtpServerFailNotifA ccmSmtpServerFailNotif is sent if the device fails on
sending an e-mail notification through an SMTP server in
ccmSmtpServersTable.
For each SMTP server, an agent should not generate more
than one ccmSmtpServerFailNotif 'notification-event'
in a given time interval (ten seconds is the suggested
default). A 'notification-event' is the transmission of
a single trap or inform PDU to a list of notification
destinations.
If within the throttling period, additional failures to
send a message through same server occur, then
notification-events for these failure should be suppressed
by the agent until the current throttling period expires. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.300.0.1 |
ccmAlertGroupTypeAddedNotifA ccmAlertGroupTypeAddedNotif is sent, when
a new entry corresponds to the
'callHomeAlertGroupName' object in this
notification is added into the
callHomeAlertGroupTypeTable. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.300.0.2 |
ccmAlertGroupTypeDeletedNotifA ccmAlertGroupTypeAddedNotif is sent, when an
entry corresponds to 'callHomeAlertGroupName'
object in this notification is deleted
from the callHomeAlertGroupTypeTable. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.300.0.3 |
ccmSmtpMsgSendFailNotifA ccmSmtpMsgSendFailNotif is generated if the device
fails to send an e-mail notification through all of the
SMTP servers in ccmSmtpServersTable. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.300.0.4 |
ccmEventNotifThis notification is generated every time a Call Home
external event is triggered in the system. Internal events
like Periodic Configuration and Inventory events do not
generate notifications. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.300.0.5 |
ciscoCallHomeMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.1 |
ccmCallHomeConfiguration OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.1.1 |
callHomeEnableThis object enables/disables the Call Home infrastructure
on the local device.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.1.1 |
sysContactPhoneNumberThe phone number of the contact person for this managed
node. The phone number must start with '+' and contains
only numeric characters except for space and '-'.
Some valid phone numbers are
+44 20 8332 9091
+45 44886556
+81-46-215-4678
+1-650-327-2600
A set operation on this object with a invalid format will
result in an error.rw SnmpAdminString .1.3.6.1.4.1.9.9.300.1.1.2 |
sysContactEmailAddressThe email address of the contact person for this managed
node. The format of this object is an e-mail address
which conforms to RFC822 and RFC1123 'addr-spec'
syntax.
Some valid Email Addresses are
raj@helpme.com,
bob@service.com,
mtom@abc.caview.ca.us
A set operation on this object with a invalid format will
result in an error.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.300.1.1.3 |
sysStreetAddressThe mailing address of this managed node.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.300.1.1.4 |
callHomeCustomerIdA string, in whatever format is appropriate, to identify
the customer.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.300.1.1.5 |
callHomeContractIdA string, in whatever format is appropriate, to identify
the support contract between the customer and support
partner.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.300.1.1.6 |
callHomeSiteIdA location identifier of this device.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.300.1.1.7 |
callHomeDeviceServicePriorityThe service priority of the device.
This determines how fast the device has to be serviced.rw SyslogSeverity (CISCO-SYSLOG-MIB) .1.3.6.1.4.1.9.9.300.1.1.8 |
callHomeAlertActionThis object acts as a trigger by which the generation of
a particular type of alert can be verified. Specifically,
setting this object to a type of alert triggers the
sending of a Call Home message for the specified type
so that the Call Home backend is activated.
No action is taken if this object is set to 'noOp'.
The value of the object when read is always 'noOp'.rw CallHomeAlert .1.3.6.1.4.1.9.9.300.1.1.9 |
callHomeAlertActionStatusThis object provides the status of the last Call Home action
invocation.
unknown (1) - unknown
successful (2) - successful
inprogress (3) - action in progress
failed (4) - failed
If the value of this object is 'failed', then the
callHomeAlertActionFailureCause provides the cause for the
failure.
Management stations could read value of this object after a
successful set to the callHomeAlertAction object to find
out the result of the test.ro Enumeration .1.3.6.1.4.1.9.9.300.1.1.10 |
callHomeAlertActionFailureCauseThis object provides the failure cause for the last
Call Home test invocation.
Note that this object is valid only if value of
callHomeAlertActionStatus is 'failed'.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.300.1.1.11 |
callHomeDestProfileTableThis table contains destination profiles.
The Call Home feature requires the destination profiles to be
setup to be able to send the Call Home messages to
destinations configured. SEQUENCE OF CallHomeDestProfileEntry .1.3.6.1.4.1.9.9.300.1.1.12 |
callHomeDestProfileEntryAn entry containing information about a Call Home
destination. CallHomeDestProfileEntry .1.3.6.1.4.1.9.9.300.1.1.12.1 |
callHomeDestProfileNameName of the destination profile. SnmpAdminString .1.3.6.1.4.1.9.9.300.1.1.12.1.1 |
callHomeDestProfileMsgFormatThe Call Home format used with profile while sending
the message.rw CallHomeMsgFormat .1.3.6.1.4.1.9.9.300.1.1.12.1.2 |
callHomeDestProfileMaxMsgSizeMaximum message size that can be sent to destination
pointed to by this destination profile.
Implementations are allowed to assign default value.
A value of 0 for this object indicates no limitation
on maximum message size that can be sent to destination
pointed to by this destination profile.
If the maximum message size is greater than the maximum value
reportable by this object then this object should report its
maximum value (1,000,000) and callHomeDestProfileHiMaxMsgSize
must be used to report the maximum message size.rw Unsigned32 .1.3.6.1.4.1.9.9.300.1.1.12.1.3 |
callHomeDestProfileTrnsprtMthdCall Home transport method used to deliver the alert
messages.rw CallHomeTransportMethod .1.3.6.1.4.1.9.9.300.1.1.12.1.4 |
callHomeDestProfileStatusStatus of this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.1.12.1.5 |
callHomeDestProfileMsgLevelThis object contains the threshold level, used for
filtering alert messages sent to a destination.
Call Home alert message with severity level lower than
the configured threshold level would not be sent.
The default threshold level is debug (1), which means
all the alert messages will be sent.rw CallHomeMsgLevel .1.3.6.1.4.1.9.9.300.1.1.12.1.6 |
callHomeDestProfileAlertGroupsThis object represent the list of configured alert
groups for this destination profile.
User can modify the configured alert groups, by
Setting/Resetting the appropriate bits in this
object.
Setting a bit to '1' means that the alert group
is configured and alerts for this alert group
would be sent to the destination profile.
Resetting a bit to '0', means that alert group
is not configured and alerts for this alert group
would not be sent to the destination profile.rw AlertGroupList .1.3.6.1.4.1.9.9.300.1.1.12.1.7 |
callHomeDestProfileActiveThe object specifies whether the profile is active.
A value of 'true' indicates that the profile is active.
A value of 'false' indicates that the profile is not
active.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.1.12.1.8 |
callHomeDestProfileHiMaxMsgSizeMaximum size of the message that can be sent to destination
pointed to by this destination profile.
A value of zero for this object indicates that there is no
limitation on maximum size of message that can be sent to
destination pointed to by this destination profile.rw Unsigned32 UNITS "bytes" .1.3.6.1.4.1.9.9.300.1.1.12.1.9 |
callHomeEmailAddrTblMaxEntriesThe maximum number of entries that the agent supports in
the callHomeDestEmailAddressTable.
A value of zero indicates no limitation on the number of entries
in callHomeDestEmailAddressTable.ro Unsigned32 .1.3.6.1.4.1.9.9.300.1.1.13 |
callHomeDestEmailAddressTableThis table contains email addresses and HTTP URLs
for the destination profiles. SEQUENCE OF CallHomeDestEmailAddressEntry .1.3.6.1.4.1.9.9.300.1.1.14 |
callHomeDestEmailAddressEntryAn entry containing information about a Call Home
destination email address or a destination HTTP URL. CallHomeDestEmailAddressEntry .1.3.6.1.4.1.9.9.300.1.1.14.1 |
callHomeDestEmailAddressIndexAn arbitrary integer value, greater than zero, and less
than and equal to callHomeEmailAddrTblMaxEntries, which
identifies an Email address.
The object can be any value in the supported range if the
value of callHomeEmailAddrTblMaxEntries is zero.
These integer values should be non-volatile. Unsigned32 .1.3.6.1.4.1.9.9.300.1.1.14.1.1 |
callHomeDestEmailAddressThe email address associated this destination profile. The
format of this object is an e-mail address which conforms
to RFC822 and RFC1123 'addr-spec' syntax. Some examples are
raj@helpme.com,
bob@service.com,
mtom@abc.caview.ca.us.
A set operation on this object with a invalid format will
result in an error.
This object may not be modified while the value of the
corresponding instance of callHomeDestEmailAddressStatus is
'active'.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.300.1.1.14.1.2 |
callHomeDestEmailAddressStatusStatus of this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.1.14.1.3 |
callHomeDestTypeThe type of this destination address.
email - This destination address is an email address.
Object callHomeDestHttpUrl is irrelevant and
can not be set.
http - This destination address is an HTTP URL address.
Object callHomeDestEmailAddress is irrelevant and
can not be set.
This object may not be modified while the value of the
corresponding instance of callHomeDestEmailAddressStatus is
'active'.rw Enumeration .1.3.6.1.4.1.9.9.300.1.1.14.1.4 |
callHomeDestHttpUrlThe HTTP URL associated with this destination profile.
This object may not be modified while the value of the
corresponding instance of callHomeDestEmailAddressStatus is
'active'.rw CiscoURLString (CISCO-TC) .1.3.6.1.4.1.9.9.300.1.1.14.1.5 |
callHomeEmailFromThe email address that is to be used in the 'From' field
when sending the email using SMTP. The format of this object
is an e-mail address which conforms to RFC822 and RFC1123
'addr-spec' syntax.
Some examples are
raj@helpme.com,
bob@service.com,
mtom@abc.caview.ca.us.
A set operation on this object with a invalid format will
result in an error.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.300.1.1.15 |
callHomeEmailReplyToThe email address that is to be used in the 'Reply-To'
field when sending the email using SMTP. The format of
this object is an e-mail address which conforms to RFC822
and RFC1123 'addr-spec' syntax.
Some examples are
raj@helpme.com,
bob@service.com,
mtom@abc.caview.ca.us.
A set operation on this object with a invalid format will
result in an error.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.300.1.1.16 |
callHomeEmailMsgDispNotificationThe email address to which the Message Disposition
Notification (also called 'Return Receipt') sent when the
email sent from this device is read by the receiver. The
format of this object is an e-mail address which conforms
to RFC822 and RFC1123 'addr-spec' syntax.
Some examples are
raj@helpme.com,
bob@service.com,
mtom@abc.caview.ca.us.
A set operation on this object with a invalid format will
result in an error.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.300.1.1.17 |
callHomeSmtpServerAddrTypeAddress Type of the SMTP server.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.300.1.1.18 |
callHomeSmtpServerAddrAddress of the SMTP server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.300.1.1.19 |
callHomeSmtpServerPortPort of the SMTP server.rw Unsigned32 .1.3.6.1.4.1.9.9.300.1.1.20 |
ccmSmtpServersTblMaxEntriesIndicates the maximum number of SMTP servers supported by
this device. A value of zero indicates no limitation on
the number of SMTP servers.ro Unsigned32 .1.3.6.1.4.1.9.9.300.1.1.21 |
ccmSmtpServersTableThis table contains a list of SMTP servers that may be
used to send out Call Home e-mail messages.
An entry is created and deleted by using ccmSmtpServersStatus.
The maximum number of entries that can be created in this
table is limited by the object ccmSmtpServersTblMaxEntries. SEQUENCE OF CcmSmtpServersEntry .1.3.6.1.4.1.9.9.300.1.1.22 |
ccmSmtpServersEntryAn entry containing information about an SMTP server. CcmSmtpServersEntry .1.3.6.1.4.1.9.9.300.1.1.22.1 |
ccmSmtpServersAddrTypeAddress Type of the SMTP server. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.300.1.1.22.1.1 |
ccmSmtpServersAddrAddress of the SMTP server. InetAddress .1.3.6.1.4.1.9.9.300.1.1.22.1.2 |
ccmSmtpServersPortPort of the SMTP server.rw Unsigned32 .1.3.6.1.4.1.9.9.300.1.1.22.1.3 |
ccmSmtpServersStatusThe status object used to manage the rows in this table.
Objects in this conceptual row may not be modified while the
value of this object is 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.1.22.1.4 |
ccmSmtpServersPriorityThe priority of this entry relative to other entries.
System will attempt to contact SMTP servers in the order of
their priority values.
For servers with different values of ccmSmtpServersPriority,
the server with lowest value has highest priority.
For servers with same value of ccmSmtpServersPriority
the relative priority is determined by the system.rw Unsigned32 .1.3.6.1.4.1.9.9.300.1.1.22.1.5 |
ccmSmtpServersUseVrfThe Virtual Routing and Forwarding (VRF) domain configured
for this SMTP server. A zero length string indicates that
there is no VRF domain configured and the default VRF domain
is usedrw CiscoVrfName (CISCO-TC) .1.3.6.1.4.1.9.9.300.1.1.22.1.6 |
ccmSysLogSeverityDifferent devices implementing this mib may use
different criteria for issuing Call Home alerts.
For the devices that issue Call Home alerts based on
severity level of the syslog messages generated on
the device, this object determines syslog severity
levels beyond which a Call Home alert message will be
issued.
Any syslog message with a severity value greater than
the value set for this object will be ignored by the agent.
Note: severity numeric values increase as their
severity decreases, e.g. error(4) is more severe
than debug(8).
For the devices that do not issue Call Home alerts based
on syslog severity levels this object has no effect.rw SyslogSeverity (CISCO-SYSLOG-MIB) .1.3.6.1.4.1.9.9.300.1.1.23 |
ccmEnableSmtpServerNotifThis variable indicates whether the system produces
the ccmSmtpServerFailNotif.
A false value for this object will prevent
ccmSmtpServerFailNotif notification being generated
by the device.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.1.24 |
callHomeAlertGroupTypeTableThis table contains information about all the alert groups
types supported in the system.
An entry is created if a new alert group becomes available
in the system.
An entry is deleted if the alert group becomes unavailable. SEQUENCE OF CallHomeAlertGroupTypeEntry .1.3.6.1.4.1.9.9.300.1.1.25 |
callHomeAlertGroupTypeEntryAn entry containing information about a
particular Call Home alert group type
in the system. CallHomeAlertGroupTypeEntry .1.3.6.1.4.1.9.9.300.1.1.25.1 |
callHomeAlertGroupTypeIndexThis object represents the index corresponding
to the particular alert group type configured
in the system. Unsigned32 .1.3.6.1.4.1.9.9.300.1.1.25.1.1 |
callHomeAlertGroupNameThis object represents the name of
alert group configured in the system.ro SnmpAdminString .1.3.6.1.4.1.9.9.300.1.1.25.1.2 |
callHomeAlertGroupEnableThis object enables or disables the alert group for the
system.
A value of 'true' for this object enables and a value of
'false' for this object disables the alert group.
Call Home messages are generated only for those alert groups
which are enabled in the system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.1.25.1.3 |
callHomeAlertGroupCapabilityThis object indicates the method used by alert group
to generate Call Home messages.
callHomeMessageSeverity -
Call Home alert is generated based only on the level
of severity.
periodic -
Call Home alert is generated periodically.
regularExpression -
Call Home alert is generated based on the configured
regular expression.
event -
Call Home alert is generated based on change event.
onDemand -
Call Home alert is generated at user request.
onDemandPerEntity -
Call Home alert is generated for specific entities
at user request.
periodicHourly -
Call Home alert is generated hourly.
periodicMinutes -
Call Home alert is generated periodically after
specified number of minutes.ro Bits .1.3.6.1.4.1.9.9.300.1.1.25.1.4 |
callHomeSwInventoryTableThis table contains inventory information about all the
software services currently enabled in the system.
When a software service is disabled from the system, all
the entries corresponds to that software service will be
deleted automatically from the table. SEQUENCE OF CallHomeSwInventoryEntry .1.3.6.1.4.1.9.9.300.1.1.26 |
callHomeSwInventoryEntryAn entry containing information about the name value
pair for a particular software service enabled in the
system. CallHomeSwInventoryEntry .1.3.6.1.4.1.9.9.300.1.1.26.1 |
callHomeSwServiceNameThis object represents the name of software service
enabled in the system. SnmpAdminString .1.3.6.1.4.1.9.9.300.1.1.26.1.1 |
callHomeInventoryNVPairIndexThis object represents the index corresponds to the name
value pair for a particular software service enabled in
the system.
The name value pair is a 'tuple' of (inventory info-name,
and inventory info-value) and this object uniquely
identifies a value of the tuple, for a particular
software service enabled in the system. Unsigned32 .1.3.6.1.4.1.9.9.300.1.1.26.1.2 |
callHomeInventoryInfoNameThis object represents the name of a feature , for a
particular software service enabled in the system.
For example, the value of this object could be
'number of VSAN' for the software service 'vsan_manager'.ro OCTET STRING .1.3.6.1.4.1.9.9.300.1.1.26.1.3 |
callHomeInventoryInfoValueThis object represents the value for the feature name
specified in the corresponding instance of
'callHomeInventroyInfoName' object.
For example, the value of this object could be '10' for
the corresponding instance of 'callHomeInventroyInfoName'
object with value 'number of VSAN'.ro OCTET STRING .1.3.6.1.4.1.9.9.300.1.1.26.1.4 |
ccmPeriodicSwInventoryMsgEnableThis object enables/disables the sending of periodic
software inventory Call Home message on the system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.1.27 |
ccmPeriodicSwInventoryTimeFrameThis object represents the time frame for sending the
periodic software inventory Call Home message, if the
periodic software inventory is enabled on the system
i.e., the value of 'ccmPeriodicSwInventoryMsgEnable'
object is set to 'true'.rw Unsigned32 .1.3.6.1.4.1.9.9.300.1.1.28 |
ccmMsgThrottlingEnableThis object enables/disables the message throttling
mechanism implemented on the system.
The message throttling mechanism limits the number
of Call Home messages for a alert type, sent with in
a time frame. The maximum number of Call Home alert
messages that can be sent out for a particular alert
type is '30' in a time frame of 2 hours.
That means, if the number of message sent exceeds the
maximum limit (30), with in the given time frame
(2 hours) then any further messages for that alert type
will be discarded within that time frame.
Only 30 messages for each alert type will be sent until
2 hours from the time the first message was sent. In case
2 hours has already elapsed since the first such message
was sent, then time frame and the count for the number of
messages will be reset to '0'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.1.29 |
ccmCallHomeAlertGroupCfg OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.1.1.30 |
ccmSeverityAlertGroupTableA list of severity type alert groups which are currently
configured for each of the profiles in the device.
An entry is created if a configured alert group
whose callHomeAlertGroupCapability has
'callHomeMessageSeverity'.
An entry is deleted if the destination profile unsubscribes
an severity based alert group. SEQUENCE OF CcmSeverityAlertGroupEntry .1.3.6.1.4.1.9.9.300.1.1.30.1 |
ccmSeverityAlertGroupEntryAn entry containing severity configuration information
for a particular alert group in a profile. CcmSeverityAlertGroupEntry .1.3.6.1.4.1.9.9.300.1.1.30.1.1 |
ccmAlertGroupSeverityThis object specifies the minimum severity level,
associated with alert group for a destination profile.
Call Home alert messages for this alert group with
severity level lower than one configured for this object
will not be issued by the system.
The default severity level is 'debug', which means
all the alert messages for an alert group will be issued.rw CallHomeMsgLevel .1.3.6.1.4.1.9.9.300.1.1.30.1.1.1 |
ccmPeriodicAlertGroupTableA list of periodic type alert groups which are currently
configured in the device.
An entry is created if a configured alert group
whose callHomeAlertGroupCapability has 'periodic'.
An entry is deleted if the destination profile unsubscribes
an periodic alert group. SEQUENCE OF CcmPeriodicAlertGroupEntry .1.3.6.1.4.1.9.9.300.1.1.30.2 |
ccmPeriodicAlertGroupEntryAn entry containing periodic configuration information for a
particular alert group in a profile. CcmPeriodicAlertGroupEntry .1.3.6.1.4.1.9.9.300.1.1.30.2.1 |
ccmPeriodicAlertGroupIntervalThis object specifies the type of periodic configuration
for this alert group.
This object is only instantiated when the value of
corresponding instance of ccmPeriodicAlertGroupEnable
is 'true'.
A value of 'daily' indicates that periodic message will be
generated everyday at time specified by the objects
ccmPeriodicAlertGroupHour and ccmPeriodicAlertGroupMinute.
A value of 'weekly' indicates that periodic message will be
generated once every week on the day specified by the object
ccmPeriodicAlertGroupDayOfWeek and at the time specified
by the objects ccmPeriodicAlertGroupHour and
ccmPeriodicAlertGroupMinute.
A value of 'monthly' indicates that periodic message will be
generated once every month on day of the month specified by
the object ccmPeriodicAlertGroupDayOfMonth and at time
specified by the objects ccmPeriodicAlertGroupHour and
ccmPeriodicAlertGroupMinute.
A value of 'hourly' indicates that periodic messages will be
generated once every hour. ccmPeriodicAlertGroupMinute specifies
the minute of hour at which the hourly message is generated.
A value of 'minutes' indicates that a message will be
generated periodically after the interval specified in
ccmPeriodicAlertGroupIntervalMinutes expires.rw Enumeration .1.3.6.1.4.1.9.9.300.1.1.30.2.1.1 |
ccmPeriodicAlertGroupDayOfWeekThis object specifies the day of the week on which user
wishes to receive periodic Call Home alert messages for this
entry.
This object is only instantiated when the value of
corresponding instance of ccmPeriodicAlertGroupEnable
is 'true' and the value of corresponding instance of
ccmPeriodicAlertGroupInterval is 'weekly'.rw Enumeration .1.3.6.1.4.1.9.9.300.1.1.30.2.1.2 |
ccmPeriodicAlertGroupDayOfMonthThis object specifies the day of the month on which user
wishes to receive periodic Call Home alert messages for this
entry.
If the day specified is beyond the last day of a month, the
alert message will be generated on the last day of that month.
This object is only instantiated when the value of
corresponding instance of ccmPeriodicAlertGroupEnable
is 'true' and the value of corresponding instance of
ccmPeriodicAlertGroupInterval is 'monthly'.rw Unsigned32 .1.3.6.1.4.1.9.9.300.1.1.30.2.1.3 |
ccmPeriodicAlertGroupHourThis object specifies the hours component of time
(24 hour format) at which the daily/weekly/monthly periodic
Call Home alert messages will be generated for this entry.
This object is only instantiated when the value of
corresponding instance of ccmPeriodicAlertGroupEnable
is 'true'.rw Unsigned32 .1.3.6.1.4.1.9.9.300.1.1.30.2.1.4 |
ccmPeriodicAlertGroupMinuteThis object specifies the minutes component of time at which
the hourly/daily/weekly/monthly periodic Call Home alert
messages will be generated for this entry.
This object is only instantiated when the value of
corresponding instance of ccmPeriodicAlertGroupEnable
is 'true'.rw Unsigned32 .1.3.6.1.4.1.9.9.300.1.1.30.2.1.5 |
ccmPeriodicAlertGroupEnableThis object specifies whether sending Call Home messages
periodically is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.1.30.2.1.6 |
ccmPeriodicAlertGroupIntervalMinutesThis object specifies the number of minutes after which
periodic message will be generated for this entry.
This object is only instantiated for the alert groups for which
callHomeAlertGroupCapability has the 'periodicMinutes' bit set
and the ccmPeriodicAlertGroupInterval is 'minutes'.rw Unsigned32 UNITS "minutes" .1.3.6.1.4.1.9.9.300.1.1.30.2.1.7 |
ccmMaxSyslogAlertGroupPatternsThe object dictates the maximum number of entries in the
ccmPatternAlertGroupTable which may be created with same
value for index callHomeDestProfileName.
A value of zero for this object indicates that there is no
limitation on maximum number of entries that can be created
in this table with same value of callHomeDestProfileName.ro Unsigned32 .1.3.6.1.4.1.9.9.300.1.1.30.3 |
ccmPatternAlertGroupTableA list of pattern used by the pattern type alert groups
which are currently configured in the device.
An entry is created if a configured alert group
whose callHomeAlertGroupCapability has 'regularExpression'.
An entry is deleted if the destination profile unsubscribes
a pattern based alert group.
Additional entry can also be created through
ccmPatternAlertGroupStatus.
Deleting all the entries for a destination profile alert
group combination will result in profile unsubscribing to
that alert group. SEQUENCE OF CcmPatternAlertGroupEntry .1.3.6.1.4.1.9.9.300.1.1.30.4 |
ccmPatternAlertGroupEntryAn entry containing properties for a pattern which is used
to match against system syslog messages. CcmPatternAlertGroupEntry .1.3.6.1.4.1.9.9.300.1.1.30.4.1 |
ccmAlertGroupPatternThe object contains a regular expression.
Regular Expressions:
A regular expression is a pattern (a phrase, number, or more
complex pattern):
Regular expressions are case sensitive and allow for complex
matching requirements. Simple regular expressions include
entries like Serial, misses, or 138.
Complex regular expressions include entries like 00210... ,
(is ), or [Oo]utput.
Some Practical examples of regular expressions:
The examples correspond with the various ways that you can
use regular expressions in your configurations.
For example, syslog messages on IOS look as follows:
a.
2004 Jul 21 13:26:55 %SYS-5-REDUNDANTCLOCK_OK: Redundant
clock recovered
b.
2004 Jul 21 13:26:59 %SYS-5-REDUNDANTCLOCK_FAIL: Redundant
clock failed
c.
2004 Jul 26 16:53:47 %MGMT-5-LOGIN_FAIL:User failed to log
in from 171.69.48.75 via Telnet - max attempt reached
A pattern of REDUNDANTCLOCK.* would cause all the syslogs
with severity greater than specified by
ccmProfileAlertGroupSeverity
and having a pattern REDUNDANTCLOCK followed by
REDUNDANTCLOCK followed by any number of occurrences (*)
of any character (.) resulting in corresponding Call Home
messages being generated for syslog alert group.
So both messages a and b in above examples will be resulting
in issuance of Call Home messages for the pattern
REDUNDANTCLOCK.*.
Next, a pattern of ^Telnet would cause all the syslogs
with severity greater than specified by
ccmProfileAlertGroupSeverity and having a string starting
and with Telnet resulting in corresponding Call Home
messages being generated for syslog alert group.
A pattern of LOGIN_FAIL$ would cause all the syslogs with
severity greater than specified by
ccmProfileAlertGroupSeverity and having a string ending in
LOGIN_FAIL resulting in corresponding Call Home messages
being generated for syslog alert group. SnmpAdminString .1.3.6.1.4.1.9.9.300.1.1.30.4.1.1 |
ccmPatternAlertGroupSeverityThis object specifies the severity level, used for
filtering Call Home messages in conjunction with
ccmAlertGroupPattern to be issued to destinations
associated with this entry.
Call Home alert messages for this alert group, with
severity level lower than one configured for this object
will not be issued by the system.
The default severity level is 'debug', which means
all the alert messages will be sent.rw CallHomeMsgLevel .1.3.6.1.4.1.9.9.300.1.1.30.4.1.2 |
ccmPatternAlertGroupStorageThe storage type for this conceptual row.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.1.30.4.1.3 |
ccmPatternAlertGroupStatusObject to manage creation and deletion of rows in this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.1.30.4.1.4 |
callHomeUserDefMaxCmdsThe maximum number of CLI commands that the system
supports
in the callHomeUserDefCmdTable for a particular alert
group type represented by the
callHomeAlertGroupTypeIndex object.
A value of zero for this object indicates that the number
of CLI commands system supports for a particular alert
group type is only limited by resources available on
system.ro Unsigned32 .1.3.6.1.4.1.9.9.300.1.1.30.5 |
callHomeUserDefCmdTableCall Home alert messages are sent with output of some
pre-defined commands run in the system.
This table provides an option for the user to specify
a CLI(Command Line Interface) command or set of CLI
commands to be executed when some important failures
occur in the system, and whose output should be sent
with the Call Home alert messages. The user should
associate these commands with an alert group type.
Whenever an alert message is to be sent, the Call Home
server would find out if any commands are specified by
the user for the alert group associated with the
alert message, and attach the output of those
commands in the Call Home alert message.
This table contains information about all the user
specified CLI commands for the alert groups types
supported in the system.
GLOSSARY :
CLI - Command Line Interface provided by the system. SEQUENCE OF CallHomeUserDefCmdEntry .1.3.6.1.4.1.9.9.300.1.1.30.6 |
callHomeUserDefCmdEntryAn entry containing information about a user specified
CLI command for a Call Home alert group type in
the system.
The index object 'callHomeAlertGroupTypeIndex' represents
the alert group type to which the user specified CLI
command should be associated.
User can not configure any CLI commands for a
callHomeAlertGroupTypeIndex, whose corresponding
instance callHomeAlertGroupName object is configured
with value 'Cisco-TAC'. CallHomeUserDefCmdEntry .1.3.6.1.4.1.9.9.300.1.1.30.6.1 |
callHomeUserDefCmdIndexAn arbitrary integer identifying the user specified
CLI command for a particular callHomeAlertGroupTypeIndex. Unsigned32 .1.3.6.1.4.1.9.9.300.1.1.30.6.1.1 |
callHomeUserDefCmdNameThis object represents a CLI command to be executed
and whose output should be sent with the Call Home
alert message.
The implementation of this object does not do any
syntax or semantic validation of the CLI command
specified as a value of the object.
The value of this object can not be modified
when the value of the corresponding instance of
'callHomeUserDefCmdRowStatus' is 'active'.
To modify the value this object the corresponding
entry must be deleted and re-created with new
value for this object.rw SnmpAdminString .1.3.6.1.4.1.9.9.300.1.1.30.6.1.2 |
callHomeUserDefCmdRowStatusStatus of this row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.1.30.6.1.3 |
ccmEventAlertGroupTableA list of event type alerts groups which are currently
configured in the device.
An entry is created if a configured alert group
whose callHomeAlertGroupCapability has 'event'.
An entry is deleted if the destination profile unsubscribes
an event alert group. SEQUENCE OF CcmEventAlertGroupEntry .1.3.6.1.4.1.9.9.300.1.1.30.7 |
ccmEventAlertGroupEntryAn entry containing configuration information about the
'event' alert group configured for a profile. CcmEventAlertGroupEntry .1.3.6.1.4.1.9.9.300.1.1.30.7.1 |
ccmEventAlertGroupEnableThis object specifies whether sending Call Home messages
based on alert group event is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.1.30.7.1.1 |
ccmEventAlertGroupOperSeverityThis object indicates the severity level used in the
Call Home messages.ro CallHomeMsgLevel .1.3.6.1.4.1.9.9.300.1.1.30.7.1.2 |
ccmCallHomeProfileTestControl OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.1.1.31 |
ccmDestProfileTestTableThis table lists status information about the profiles
configured on this device.
An entry will be created in this table, for each
destination profile configured in callHomeDestProfileTable.
An entry will be deleted from this table if a destination
profile is removed from callHomeDestProfileTable. SEQUENCE OF CcmDestProfileTestEntry .1.3.6.1.4.1.9.9.300.1.1.31.1 |
ccmDestProfileTestEntryAn entry containing control and status information
pertaining to test on a destination profile. CcmDestProfileTestEntry .1.3.6.1.4.1.9.9.300.1.1.31.1.1 |
ccmDestProfileTestTriggerThis object acts as a trigger by which the generation of
test message for a profile can be triggered.
Setting this object to 'true' will cause system to generate
a test message for a corresponding destination profile.
Setting this object to 'false' has no effect.
When read, this object always returns 'false'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.1.31.1.1.1 |
ccmDestProfileTestMessageThis object specifies the content of the message
used for the test operation.
If this object contains zero-length string,
a default test message will be used.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.300.1.1.31.1.1.2 |
ccmDestProfileTestStatusThis object provides the status of the last test
triggered for this destination profile.
unknown (1) - unknown
successful (2) - successful
inprogress (3) - action in progress
failed (4) - failed
If the value of this object is 'failed', then the
ccmDestProfileTestFailureCause provides the cause for the
failure.
Management stations could read value of this object after a
successful set to the ccmDestProfileTestTrigger object to
find out the result of the test.ro Enumeration .1.3.6.1.4.1.9.9.300.1.1.31.1.1.3 |
ccmDestProfileTestFailureCauseThis object provides the failure cause for the last
test performed on this profile.
Note that this object is valid only if value of
ccmDestProfileTestStatus is 'failed'.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.300.1.1.31.1.1.4 |
ccmCallHomeNotifConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.1.1.32 |
ccmSmtpMsgSendFailNotifEnableThis variable controls generation of
ccmSmtpMsgSendFailNotif.
A value of 'true' for this object will enable
ccmSmtpMsgSendFailNotif notification on the
system.
A value of 'false' for this object will disable
ccmSmtpMsgSendFailNotif notification on the
system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.1.32.1 |
ccmPeriodicSwInventoryCfg OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.1.1.33 |
ccmPeriodicSwInventoryTimeOfDayThis object represents the time of day for sending the
periodic software inventory Call Home message, if the
periodic software inventory is enabled on the system
i.e., the value of 'ccmPeriodicSwInventoryMsgEnable'
object is set to 'true'. The input should be in HH:MM
format ranging from 00:00 to 23:59.rw SnmpAdminString .1.3.6.1.4.1.9.9.300.1.1.33.1 |
ccmAlertRateLimitThe rate-limit, in alerts per minute, of call home
alerts generated by the system. Upon exceeding the rate,
the alert is dropped.rw Unsigned32 UNITS "alerts per minute" .1.3.6.1.4.1.9.9.300.1.1.34 |
ccmHttpProxyServerAddrTypeThis object specifies the type of the HTTP proxy server as
represented by the value 'ccmHttpProxyServerAddr'.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.300.1.1.35 |
ccmHttpProxyServerAddrThis object specifies the address of the HTTP proxy server.
The type of this address is indicated by the value of
'ccmHttpProxyServerAddrType'.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.300.1.1.36 |
ccmHttpProxyServerPortThis object specifies the port of the HTTP proxy server.rw Unsigned32 .1.3.6.1.4.1.9.9.300.1.1.37 |
ccmHttpProxyServerUseEnableThis object enables/disables the use of HTTP proxy
server configured for sending callhome messages over HTTP.
A value of 'true' specifies that proxy server will be
used.
A value of 'false' specifies that the proxy server will
not be used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.1.38 |
callHomeSmtpServerUseVrfThe Virtual Routing and Forwarding (VRF) domain configured
for this SMTP server. A zero length string indicates that
there is no VRF domain configured and the default VRF domain
is used
A 'set' operation with zero length string indicates that there
is no VRF domain configured. A subsequent 'get' operation on
this object will return 'default'rw CiscoVrfName (CISCO-TC) .1.3.6.1.4.1.9.9.300.1.1.39 |
ccmHttpTransportUseVrfThe Virtual Routing and Forwarding (VRF) domain configured
for HTTP transport in Call Home. A zero length string
indicates that there is no VRF domain configured and the
default VRF domain is used
A 'set' operation with zero length string indicates that there
is no VRF domain configured. A subsequent 'get' operation on
this object will return 'default'rw CiscoVrfName (CISCO-TC) .1.3.6.1.4.1.9.9.300.1.1.40 |
ccmCallHomeStats OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.1.2 |
callHomeLastAlertSentThe value of sysUpTime when the last Call Home alert
was sent.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.2.1 |
callHomeAlertsThe number of Call Home alerts sent.ro Counter32 .1.3.6.1.4.1.9.9.300.1.2.2 |
callHomeHCAlertsThe number of Call Home alerts sent. This object is a 64-bit
version of callHomeAlertsro Counter64 .1.3.6.1.4.1.9.9.300.1.2.3 |
ccmAlertsDroppedThe number of Call Home alerts dropped due to rate
limiting configured through ccmAlertRateLimit.ro Counter64 .1.3.6.1.4.1.9.9.300.1.2.4 |
ccmEventStatsTableThis table contains a list of Call Home message type for
each Call Home event.
An entry will exist for each call-home message type which
supports Call Home event statistics. SEQUENCE OF CcmEventStatsEntry .1.3.6.1.4.1.9.9.300.1.2.5 |
ccmEventStatsEntryAn entry containing Call Home event statistics for a particular
Call Home message type. CcmEventStatsEntry .1.3.6.1.4.1.9.9.300.1.2.5.1 |
ccmEventStatsTypeIndexThis object indicates the type of Call Home event.
'successful' - Call Home messages were generated successfully
for corresponding Call Home event.
'inQueue' - Call Home events are queued for processing.
'dropped' - Call Home events were dropped due to the Rate
Limiting feature within Call Home component.
'failed' - Call Home events which failed to generate
Call Home messages. Enumeration .1.3.6.1.4.1.9.9.300.1.2.5.1.1 |
ccmEventStatsMsgTypeIndexThis object indicates the type of Call Home message.
'total' - statistics based on all the message types.
'email' - statistics for Call Home messages which use
e-mail transport.
'http' - statistics for Call Home messages which use
http transport. Enumeration .1.3.6.1.4.1.9.9.300.1.2.5.1.2 |
ccmEventStatsTotalTotal number of Call Home events.ro Counter64 .1.3.6.1.4.1.9.9.300.1.2.5.1.3 |
ccmEventStatsConfigurationThe number of Configuration Call Home events.ro Counter64 .1.3.6.1.4.1.9.9.300.1.2.5.1.4 |
ccmEventStatsDiagnosticThe number of Diagnostic Call Home events.ro Counter64 .1.3.6.1.4.1.9.9.300.1.2.5.1.5 |
ccmEventStatsEnvironmentThe number of Environment Call Home events.ro Counter64 .1.3.6.1.4.1.9.9.300.1.2.5.1.6 |
ccmEventStatsInventoryThe number of Inventory Call Home events.ro Counter64 .1.3.6.1.4.1.9.9.300.1.2.5.1.7 |
ccmEventStatsSystemLogThe number of System Log Call Home events.ro Counter64 .1.3.6.1.4.1.9.9.300.1.2.5.1.8 |
ccmEventStatsTestThe number of Test Call Home events.ro Counter64 .1.3.6.1.4.1.9.9.300.1.2.5.1.9 |
ccmEventStatsRequestThe number of Request Call Home events.ro Counter64 .1.3.6.1.4.1.9.9.300.1.2.5.1.10 |
ccmEventStatsSendCliOutputThe number of Send-CLI-Output Call Home events.ro Counter64 .1.3.6.1.4.1.9.9.300.1.2.5.1.11 |
ccmCallHomeStatus OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.1.3 |
ccmSmtpServerStatusTimeStampThis object indicates the time when ccmSmtpServerStatusTable
was last updated, either by a SNMP Servers check by
ccmSmtpServerStatusInitiate or by a change in the SMTP
servers configured in ccmSmtpServersTable.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.3.1 |
ccmSmtpServerStatusInitiateA control object used to initiate the availability status
check of the SMTP Servers configured in ccmSmtpServersTable.
Setting this object to 'true' will check the status of
the SMTP servers and update the status in
ccmSmtpServerStatusTable. This object cannot be set to 'true'
when the value of ccmSmtpServerStatusResult is 'inprogress'.
Setting this object to 'false' has no effect.
When read, this object always returns 'false'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.3.2 |
ccmSmtpServerStatusResultThis object provides the status of the last SMTP status
check initiated by ccmSmtpServerStatusInitiate.
Management stations could read value of this object after a
successful set of the ccmSmtpServerStatusInitiate object to
find out the result of the SMTP server status check.ro Enumeration .1.3.6.1.4.1.9.9.300.1.3.3 |
ccmSmtpServerStatusTableA list of SMTP servers. An entry will exist for each SMTP
server which is configured in the ccmSmtpServersTable if the
value of ccmSmtpServerStatusResult is 'successful'. SEQUENCE OF CcmSmtpServerStatusEntry .1.3.6.1.4.1.9.9.300.1.3.4 |
ccmSmtpServerStatusEntryAn entry containing availability status of a particular
SMTP Server. CcmSmtpServerStatusEntry .1.3.6.1.4.1.9.9.300.1.3.4.1 |
ccmSmtpServerStatusAvailabilityThis variable indicates whether the SMTP Server
is currently available.ro Enumeration .1.3.6.1.4.1.9.9.300.1.3.4.1.1 |
ccmOnDemandMsgServAvailableThis object indicates whether the system is ready to generate
on demand Call Home messages.
A value of 'true' indicates that the system is ready to generate
on demand Call Home messages. A value of 'false' indicates that
sending of on demand Call Home messages can not be initiated.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.3.5 |
ccmCallHomeOnDemandActions OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.1.4 |
ccmOnDemandMsgSendControl OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.1.4.1 |
ccmOnDemandMsgSendAlertGroupThe object specifies the alert group for which on demand
Call Home message should be generated.
Only those alert groups whose corresponding instance
of callHomeAlertGroupCapability has 'onDemand' or
'onDemandPerEntity', may be set for this object.
Value of this object should be ignored if the value of
ccmOnDemandMessageType is other than 'alertGroup'.rw Unsigned32 .1.3.6.1.4.1.9.9.300.1.4.1.1 |
ccmOnDemandMsgSendProfileThis object specifies the name of the profile for which
the on demand Call Home messages should be generated.
A zero length string for this object indicates that
on demand Call Home messages are generated for all profiles.
Value of this object should be ignored if the value of
ccmOnDemandMessageType is other than 'alertGroup'.rw SnmpAdminString .1.3.6.1.4.1.9.9.300.1.4.1.2 |
ccmOnDemandMsgSendEntPhyIndexThis object specifies the value of entPhysicalIndex of the
physical entity for which the on demand Call Home messages
should be generated.
Only those entities which support generation of on demand
Call Home messages may be specified for this object.
The value of this object should be ignored if alert group
specified by ccmOnDemandMsgSendAlertGroup does not have
'onDemandPerEntity' capability.
Value of this object should be ignored if the value of
ccmOnDemandMessageType is other than 'alertGroup'.rw EntPhysicalIndexOrZero (CISCO-TC) .1.3.6.1.4.1.9.9.300.1.4.1.3 |
ccmOnDemandMsgSendTriggerObject to trigger on demand Call Home messages.
Setting the object to 'true' triggers on demand Call Home
messages.
Setting the object to 'false' has no effect.
When read, this object always returns 'false'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.4.1.4 |
ccmOnDemandCliMsgControl OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.1.4.2 |
ccmOnDemandCliMsgCliListThe object specifies a list of commands that will be executed
and the output of which will be part of on demand Call Home
message.
The list contains one or more commands which are separated by
';'.
Examples of command list:
- show version
- show version;show module;show vlanrw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.300.1.4.2.1 |
ccmOnDemandCliMsgTransportThe object specifies the transport method used to deliver the
on demand Call Home messages with CLI output.
'email'
delivered via e-mail.
'http'
delivered via HTTP.rw Enumeration .1.3.6.1.4.1.9.9.300.1.4.2.2 |
ccmOnDemandCliMsgEmailThe object specifies the e-mail address to which the on demand
Call Home message with CLI output will be sent if
ccmOnDemandCliMsgTransport is 'email'.
The object specifies the e-mail address to which the
Smart Call Home backend will forward the on demand Call Home
message with CLI output if ccmOnDemandCliMsgTransport is
'http'.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.300.1.4.2.3 |
ccmOnDemandCliMsgFormatThis object specifies the format of the on demand Call Home
message with CLI output.rw CallHomeMsgFormat .1.3.6.1.4.1.9.9.300.1.4.2.4 |
ccmOnDemandCliMsgTacServiceReqIdThis object specifies the Service Request Identifier
associated with on demand Call Home message with CLI output.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.300.1.4.2.5 |
ccmOnDemandCliMsgTriggerObject to trigger on demand Call Home messages with CLI output.
Setting the object to 'true' triggers on demand Call Home
messages.
Setting the object to 'false' has no effect.
When read, this object always returns 'false'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.4.2.6 |
ccmSmartCallHomeActions OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.1.5 |
ccmSmartCallHomeProfileThis object specifies the name of the profile for which
the Smart Call Home messages should be generated.
A zero length string for this object indicates that the
Smart Call Home messages are generated only for Cisco-TAC
profile.rw SnmpAdminString .1.3.6.1.4.1.9.9.300.1.5.1 |
ccmSmartCallHomeServiceTypeThe object specifies the type of service requested from
Smart Call Home server.
'commandReference' indicates a request for command reference
to Smart Call Home server.
'configSanity' indicates a request for config-sanity request
to Smart Call Home server.
'bugsList' indicates a request for bugs-list
to Smart Call Home server.
'outputAnalysis' indicates a request for output-analysis
to Smart Call Home server.
'productAdvisory' indicates a request for exceptions
report/advisory to Smart Call Home server.rw Enumeration .1.3.6.1.4.1.9.9.300.1.5.2 |
ccmSmartCallHomeAnalysisCmdThe object specifies an existing display/show command on the
the system. The output of the command will be included in
the Call Home message and be processed by Cisco backend OI
(Output Interpreter) tool for further analysis.
This object is applicable only if the value of the
corresponding ccmSmartCallHomeServiceType is 'outputAnalysis'.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.300.1.5.3 |
ccmSmartCallHomeCcoIdThe object specifies registered CCO ID (Cisco Connection
Online) ID to which the response to Smart Call Home requests
should be directed.
Response from Cisco will be directed to system contact
address specified in the Smart Call Home request if value
of this object is a zero length string.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.300.1.5.4 |
ccmSmartCallHomeTriggerObject to trigger Smart Call Home request messages.
Setting the object to 'true' triggers Smart Call Home
request message.
The object can be set to the value of 'true' only if
ccmOnDemandMsgServAvailable returns 'true'.
Setting the object to 'false' has no effect.
When read, this object always returns 'false'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.5.5 |
ccmCallHomeVrf OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.1.6 |
ccmCallHomeVrfNameThe name of Virtual Routing and Forwarding (VRF) domain
configured for Call Home feature.
A zero length string indicates that there is no VRF domain
configured and the default VRF domain is used by Call Home
feature.rw CiscoVrfName (CISCO-TC) .1.3.6.1.4.1.9.9.300.1.6.1 |
ccmCallHomeMessageSource OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.1.7 |
ccmMsgSourceIpAddrTypeThe type of Internet address to be used as the source address
while generating Call Home messages.
Changing the value of this object may change the value of
ccmMsgSourceInterface.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.300.1.7.1 |
ccmMsgSourceIpAddrThe Internet address to be used as the source address while
generating Call Home messages. The type of this address is
determined by the ccmMessageSourceIpAddrType object.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.9.300.1.7.2 |
ccmMsgSourceInterfaceThe interface to be used while generating Call Home messages.
A value of zero indicates that a source interface is not
specified.
Changing the value of this object may change the value of
ccmMsgSourceIpAddrType and ccmMsgSourceIpAddr.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.9.9.300.1.7.3 |
ccmCallhomeEvents OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.1.8 |
ccmEventDescriptionThis object indicates the description of the Call Home
event that occurred in the system.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.300.1.8.1 |
ccmEventTimeThis object indicates Time when the last
Call Home alert was triggered.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.8.2 |
ccmEventUrgencyLevelThis object specifies the minimum urgency level, associated
with Call Home event that occurred in the system.ro CallHomeMsgLevel .1.3.6.1.4.1.9.9.300.1.8.3 |
ccmCallHomeDiagSignature OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.1.9 |
ccmDiagSignatureActiveThe object specifies if the Diagnostic Signature functionality
of Call Home is active.
Diagnostic signatures allow customers to download Cisco
digitally signed signatures to devices, and call home will be
able to support new events and new actions without upgrading
the software.
A value of 'true' makes the Diagnostic Signature functionality
active.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.9.1 |
ccmDiagSignatureProfileNameThis object specifies the profile that will use
the Diagnostic Signature functionality.
A zero length string for this object indicates that
Cisco-TAC profile will use the Diagnostic Signature
functionality.rw SnmpAdminString .1.3.6.1.4.1.9.9.300.1.9.2 |
ccmCallHomeDiagSignatureInfoTableA list of Call Home Diagnostic Signatures installed on the
device. SEQUENCE OF CcmCallHomeDiagSignatureInfoEntry .1.3.6.1.4.1.9.9.300.1.9.3 |
ccmCallHomeDiagSignatureInfoEntryAn entry containing management information of a
Call Home Diagnostic Signature. CcmCallHomeDiagSignatureInfoEntry .1.3.6.1.4.1.9.9.300.1.9.3.1 |
ccmCallHomeDiagSignatureNameThe name of Call Home Diagnostic Signature installed on the
device. SnmpAdminString .1.3.6.1.4.1.9.9.300.1.9.3.1.1 |
ccmCallHomeDiagSignatureTypeThe type of this Call Home Diagnostic Signature.ro Enumeration .1.3.6.1.4.1.9.9.300.1.9.3.1.2 |
ccmCallHomeDiagSignatureFuncDescrA user friendly string providing functionality description
for this Call Home Diagnostic Signature.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.300.1.9.3.1.3 |
ccmCallHomeDiagSignatureRevThe revision information of Call Home Diagnostic Signature.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.300.1.9.3.1.4 |
ccmCallHomeDiagSignatureSignerThe entity who signed this Call Home Diagnostic Signature.
'cisco' - Diagnostic Signature has been signed by Cisco.
'partner' - Diagnostic Signature has been signed by
a Cisco partner.
'thirdParty' - Diagnostic Signature has been signed by
a third-party.ro Enumeration .1.3.6.1.4.1.9.9.300.1.9.3.1.5 |
ccmCallHomeDiagSignatureTriggerCountThe number of times this Call Home Diagnostic Signature
has been triggered.ro Counter32 .1.3.6.1.4.1.9.9.300.1.9.3.1.6 |
ccmCallHomeDiagSignatureAvgRuntimeThe average run time of this Call Home Diagnostic Signature.ro Unsigned32 UNITS "milli seconds" .1.3.6.1.4.1.9.9.300.1.9.3.1.7 |
ccmCallHomeDiagSignatureMaxRuntimeThe maximum amount of time it took to run this Call Home
Diagnostic Signature.ro Unsigned32 UNITS "milli seconds" .1.3.6.1.4.1.9.9.300.1.9.3.1.8 |
ccmCallHomeSecurity OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.1.10 |
ccmCallHomeSecurityLevelThis object specifies the security level for Call Home.
normal - running configuration and show CLI output are not
changed within Call Home messages.
high - system reveal subset of running configuration and
show CLI output within Call Home messages due to
privacy and security concern.rw Enumeration .1.3.6.1.4.1.9.9.300.1.10.1 |
ccmCallHomeReporting OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.1.11 |
ccmAnonymousReportingEnableThis object specifies if anonymous reporting functionality is
enable for Call Home.
A value of 'true' enables the anonymous reporting
functionality.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.11.1 |
ccmCallHomeHttpProxy OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.1.12 |
ccmCallHomeAaa OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.1.13 |
ccmAaaAuthEnableThe object specifies if the AAA authorization is required
when running the CLI commands in Call Home messages.
A value of 'true' enables the AAA authorization for the
CLI commands in Call Home messages.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.300.1.13.1 |
ccmAaaAuthUserNameThe object specifies the user name used by Call Home for AAA
authorization.
Value of this object should be ignored if ccmAaaAuthEnable
is 'false'.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.9.9.300.1.13.2 |
chMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.2 |
chMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.2.1 |
chMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.300.2.2 |