CISCO-CALL-TRACKER-MIB
AI MIB Summary
The CISCO-CALL-TRACKER-MIB monitors end-to-end call establishment and teardown states for data sessions on Cisco Network Access Servers, tracking signaling protocol interactions (such as ISDN D Channel) and session progress from the hardware layer through the application layer. It provides granular visibility into active data call states, including byte stream and packet format (e.g., PPP) session metrics, enabling precise troubleshooting of dial-up and remote access connectivity issues.
This MIB module provides information for tracking the progress and status of a data call from the hardware layer through the application or service layer.
A data call is a call setup via a signaling protocol (e.g., ISDN D Channel signaling) on the Public Switching Telephony Network to a Network Access Server in order to transfer data, either as a byte stream (e.g., terminal emulation) or in a packet format (e.g., PPP packets) from a data terminal (e.g., Personal Computer) to a data network (e.g., Internet).
90
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
90 total| Object Name |
|---|
ciscoCallTrackerMIB OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.163 |
SNMPv2-SMI-v1 Unknown .1.3.6.1.4.1.9.9.163 |
cctMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.163.1 |
cctGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.163.1.1 |
cctCallIdPrefixThis object may be used in conjunction with objects of
type CctCallId to provide call references which are
unique across system re-initializations.
This value is generated at system re-initialization.
It is a 32-bit random number, with very low likely-hood
of repeating within the lifetime of the system.ro Unsigned32 -- Rsyntax Gauge32 .1.3.6.1.4.1.9.9.163.1.1.1 |
cctActive OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.163.1.2 |
cctActiveTableNumberEntriesThe number of entries currently in the
cctActiveTable.ro Gauge32 .1.3.6.1.4.1.9.9.163.1.2.1 |
cctActiveTableHighWaterMarkMaximum number of entries present in cctActiveTable
since last system re-initialization.
This corresponds to the maximum value reported by
cctActiveTableNumberEntries.ro Gauge32 .1.3.6.1.4.1.9.9.163.1.2.2 |
cctActiveTableThis table contains entries for active calls in the
system. All such calls either originate or terminate
at this system.
The table is indexed by call ID assigned to the call. SEQUENCE OF CctActiveEntry .1.3.6.1.4.1.9.9.163.1.2.3 |
cctActiveEntryThe information regarding a single call.
Entries are created when a setup request is first
received by the system.
Entries are removed when a call is terminated or
rejected. A corresponding entry is created in the
cctHistoryTable. CctActiveEntry .1.3.6.1.4.1.9.9.163.1.2.3.1 |
cctActiveCallIdRepresents a Call Identifier.
The call identifier is a monotonically increasing
unsigned integer which uniquely identifies the call
within the system.
The Call ID is represented as an unsigned 32-bit
integer. After 4,294,967,295 calls, the ID will wrap
and the 4,294,967,296th call will receive the next
smallest available id starting from 1.
Zero is not a valid value. CctCallId -- Rsyntax Gauge32 .1.3.6.1.4.1.9.9.163.1.2.3.1.1 |
cctActiveSetupTimeValue of sysUpTime when the call is first made known to
the system.ro TimeStamp -- Rsyntax TimeTicks .1.3.6.1.4.1.9.9.163.1.2.3.1.2 |
cctActiveOriginThis object indicates how the call was created.
originate(1) - The call was initiated locally with
the system sending the setup request.
Dialout
answer(2) - The call was initiated remotely and
the system received the setup request.
Dialinro Enumeration .1.3.6.1.4.1.9.9.163.1.2.3.1.3 |
cctActiveConnectionTimeValue of sysUpTime when the system connected the call.ro TimeStamp -- Rsyntax TimeTicks .1.3.6.1.4.1.9.9.163.1.2.3.1.4 |
cctActivePhysicalLayerReadyTimeValue of sysUpTime when the physical layer for the call
achieved a steady state and the call is ready for higher
protocol layers to begin.
In the case of modem calls, the physical layer for the
call achieves a steady state when the data rates,
modulations, and error correcting protocols have been
negotiated between the originating and answering modems.
This is primarily intended for calls which connect to a
processing resource identified by cctActiveResourceSlot
and cctActiveResourcePort.
It also applies to digital calls using adaptive rate
technologies such as V.110 and V.120.ro TimeStamp -- Rsyntax TimeTicks .1.3.6.1.4.1.9.9.163.1.2.3.1.5 |
cctActiveServiceUpTimeValue of sysUpTime when the call service type identified
in cctActiveServiceType was established.ro TimeStamp -- Rsyntax TimeTicks .1.3.6.1.4.1.9.9.163.1.2.3.1.6 |
cctActiveServiceTypeService associated with the call.
This is the highest level of service known to the system
for the call. The service represents the encapsulation
protocol layer active for the call.
In the case of multiple services on a given call, the last
service activated will be reported.ro CctServiceType -- Rsyntax INTEGER { -- none(1), -- other(2), -- slip(3), -- ppp(4), -- mp(5), -- tcpClear(6), -- telnet(7), -- exec(8), -- l2f(9), -- l2tp(10) -- } .1.3.6.1.4.1.9.9.163.1.2.3.1.7 |
cctActiveUserValidationTimeValue of sysUpTime when the user identification
associated with this call was validated.
See cctActiveUserId for description of user
identification.ro TimeStamp -- Rsyntax TimeTicks .1.3.6.1.4.1.9.9.163.1.2.3.1.8 |
cctActiveUserIdThe User login ID or zero length string if unavailable.ro DisplayString .1.3.6.1.4.1.9.9.163.1.2.3.1.9 |
cctActiveUserIpAddrThe IP address assigned to the cctActiveUserId for
this call or 0.0.0.0 if not applicable or unavailable.ro IpAddress .1.3.6.1.4.1.9.9.163.1.2.3.1.10 |
cctActiveUserSubnetMaskThe IP subnet mask assigned to the cctActiveUserId for
this call or 0.0.0.0 if not applicable or unavailable.ro IpAddress .1.3.6.1.4.1.9.9.163.1.2.3.1.11 |
cctActiveAccountingSessionIdAccounting session identification assigned to this call
by AAA.
The session ID is sent by AAA to RADIUS as the
Acct-Session-Id attribute or TACACS+ as the task_id.
If no accounting session ID is assigned, the value is a
null string.ro DisplayString .1.3.6.1.4.1.9.9.163.1.2.3.1.12 |
cctActiveCallCategoryThe call category or typero CctCallCategory -- Rsyntax INTEGER { -- none(1), -- other(2), -- modem(3), -- isdnSync(4), -- v110(5), -- v120(6), -- casDigital(7) -- } .1.3.6.1.4.1.9.9.163.1.2.3.1.13 |
cctActiveInitialRxRateInitial receive data rate for this call.
If call is a synchronous digital call such as ISDN sync,
this value is the data rate of the B-channel.
If call is asynchronous, even if using a synchronous
transmission medium such as ISDN, the value is
determined by the resource providing the asynchronous
processing. For modem calls, this value corresponds to
the value of cmRXRate from CISCO-MODEM-MGMT-MIB,
immediately after the modem has completed initial
negotiations.
This value does not change, even if the data rate varies
during the call.
This value will be zero until an initial data rate has
been determined.ro Unsigned32 -- Rsyntax Gauge32 -- Units -- bits per second .1.3.6.1.4.1.9.9.163.1.2.3.1.14 |
cctActiveInitialTxRateInitial transmit data rate for this call.
If call is a synchronous digital call such as ISDN sync,
this value is the data rate of the B-channel.
If call is asynchronous, even if using a synchronous
transmission medium such as ISDN, the value is
determined by the resource providing the asynchronous
processing. For modem calls, this value corresponds to
the value of cmTXRate from CISCO-MODEM-MGMT-MIB,
immediately after the modem has completed initial
negotiations.
This value does not change, even if the data rate varies
during the call.
This value will be zero until an initial data rate has
been determined.ro Unsigned32 -- Rsyntax Gauge32 -- Units -- bits per second .1.3.6.1.4.1.9.9.163.1.2.3.1.15 |
cctActiveResourceSlotIdentification of the processing resource allocated to
the call.
In the case of a call requiring a modem resource, this
is the value of cmSlotIndex from CISCO-MODEM-MGMT-MIB.
This value along with cctActiveResourcePort uniquely
identifies a resource port.
Value is -1 if call does not utilize such a resource.ro Integer32(-1..214783647) .1.3.6.1.4.1.9.9.163.1.2.3.1.16 |
cctActiveResourcePortIdentification of the processing resource allocated to
the call.
In the case of a call requiring a modem resource, this
is the value of cmPortIndex from CISCO-MODEM-MGMT-MIB.
This value along with cctActiveResourceSlot uniquely
identifies a resource port.
Value is -1 if call does not utilize such a resource.ro Integer32(-1..214783647) .1.3.6.1.4.1.9.9.163.1.2.3.1.17 |
cctActiveEntrySlotThe device slot containing the port on which the call
exists.ro Integer32 .1.3.6.1.4.1.9.9.163.1.2.3.1.18 |
cctActiveEntryPortThe physical port within the device slot on which the
call exists.ro Integer32 .1.3.6.1.4.1.9.9.163.1.2.3.1.19 |
cctActiveEntryDs1The DS1 link containing the call. This may be a DS1
contained within a larger grouping of multiple DS1s
within a single physical port.
If the physical port is of type DS1, this value is
identical to cctActiveEntryPort.
If the DS1 is a logical subinterface within the
physical port, this value is the number of the DS1
within this slot.
Examples:
8 port DS1 card - cctActiveEntryPort and
cctActiveEntryDs1 will have
identical values.
3 port T3 card - cctActiveEntryPort represents
T3 ports.
cctActiveEntryEntryDs1 represents
logical T1 interfaces.
Each T3 contains 28 T1 interfaces.
The T1 interfaces are numbered
sequentially across the entire
T3 card.ro Integer32 .1.3.6.1.4.1.9.9.163.1.2.3.1.20 |
cctActiveEntryChannelThe channel or timeslot within the cctActiveEntryDs1
allocated to the call.ro Integer32 .1.3.6.1.4.1.9.9.163.1.2.3.1.21 |
cctActiveCalledPartyIdThe called telephone number for this call.
For calls answered by the system, this corresponds to
the Dialed Number Identification (DNIS).
For calls originated by the system, this is the
destination number.
If not available this is a zero-length string.ro DisplayString .1.3.6.1.4.1.9.9.163.1.2.3.1.22 |
cctActiveCallingPartyIdThe calling telephone number for this call.
For calls answered by the system, this corresponds to
the calling identification (CLID).
For calls originated by the system, this is the
number associated with the device.
For the interworking call, this object contains the
translated calling party number if there is a
translation rule is associated with dial plan for making
this outgoing call.
If not available this is a zero-length string.ro DisplayString .1.3.6.1.4.1.9.9.163.1.2.3.1.23 |
cctActiveMpBundleIdMultilink PPP bundle identification for call if
cctActiveServiceType has the value 'mp'.
If the value of cctActiveServiceType for this call is
not 'mp', then the value of this object is not
meaningful.ro Unsigned32 -- Rsyntax Gauge32 .1.3.6.1.4.1.9.9.163.1.2.3.1.24 |
cctActiveChargedUnitsThe number of charged units for this connection.
For incoming calls or if charging information is
not supplied by the switch, the value of this object
will be zero.ro AbsoluteCounter32 -- Rsyntax Gauge32 .1.3.6.1.4.1.9.9.163.1.2.3.1.25 |
cctActiveReceiveBytesThe number of bytes received on the call. All the
'raw' bytes are counted including any protocol headers
which may or may not be present depending on the value
of cctActiveServiceType.ro AbsoluteCounter32 -- Rsyntax Gauge32 -- Units -- bytes .1.3.6.1.4.1.9.9.163.1.2.3.1.26 |
cctActiveTransmitBytesThe number of bytes transmitted on the call. All the
'raw' bytes are counted including any protocol headers
which may or may not be present depending on the value
of cctActiveServiceType.ro AbsoluteCounter32 -- Rsyntax Gauge32 -- Units -- bytes .1.3.6.1.4.1.9.9.163.1.2.3.1.27 |
cctHistory OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.163.1.3 |
cctHistoryTableEntriesLimitThe upper limit on the number of entries that the
cctHistoryTable may contain.
A value of zero will prevent any history from being
retained.
This value may not exceed the system specific limit
provided in cctHistoryTableMaxEntries.rw Unsigned32 .1.3.6.1.4.1.9.9.163.1.3.1 |
cctHistoryTableMaxEntriesThe maximum allowed table length supported by this
system. The value of cctHistoryTableEntriesLimit may
not exceed this value.ro Unsigned32 -- Rsyntax Gauge32 .1.3.6.1.4.1.9.9.163.1.3.2 |
cctHistoryTableRetainTimerThe maximum amount of time that an entry will be
maintained within the cctHistoryTable before being
deleted.
A value of zero will prevent any history from being
retained.rw Unsigned32 .1.3.6.1.4.1.9.9.163.1.3.3 |
cctHistoryTableNumberEntriesCount of the number of entries currently in the
cctHistoryTable.ro Gauge32 .1.3.6.1.4.1.9.9.163.1.3.4 |
cctHistoryTableHighWaterMarkMaximum number of entries present in cctHistoryTable
since last system re-initialization or the value
of cctHistoryTableEntriesLimit has been changed.
This corresponds to the maximum value reported by
cctHistoryTableNumberEntries.
Changing the value of cctHistoryTableEntriesLimit resets
this value to zero.ro Gauge32 .1.3.6.1.4.1.9.9.163.1.3.5 |
cctHistoryTableNewestIndexThis object provides the index value of the most
recent entry currently in the cctHistoryTable.
A value of zero indicates there has never been an
entry in the table or all entries have expired.ro Unsigned32 .1.3.6.1.4.1.9.9.163.1.3.6 |
cctHistoryTableThis table provides information on terminated calls. SEQUENCE OF CctHistoryEntry .1.3.6.1.4.1.9.9.163.1.3.7 |
cctHistoryEntryThe information regarding a single terminated call.
An entry of this table is created when the system
initiates, detects, or is notified of a call
termination. Resources allocated to the call may
still be in use by the call when the entry is created.
An entry is deleted when it has existed in this table
longer than cctHistoryTableRetainTimer minutes.
An entry is also removed if the table is full and a new
entry needs to be created to accomondate a terminated
call. The oldest entry in the table will be deleted. CctHistoryEntry .1.3.6.1.4.1.9.9.163.1.3.7.1 |
cctHistoryIndexA monotonically increasing integer for the sole purpose
of indexing terminated calls. When it reaches the
maximum value the agent wraps the value back to 1 and
will flush existing entries. Unsigned32 .1.3.6.1.4.1.9.9.163.1.3.7.1.1 |
cctHistoryCallIdThe call identifier for the call.
This is the same value assigned to the call in
cctActiveCallId when it was in the cctActiveTable.
It is possible for two cctHistoryEntry entries to have
the same cctHistoryCallId if one very long running call
terminates after the cctActiveCallId has wrapped around
and is reassigned to a new short lived call.ro CctCallId -- Rsyntax Gauge32 .1.3.6.1.4.1.9.9.163.1.3.7.1.2 |
cctHistorySetupTimeValue of sysUpTime when the call was first made known to
the system.ro TimeStamp -- Rsyntax TimeTicks .1.3.6.1.4.1.9.9.163.1.3.7.1.3 |
cctHistoryOriginThis object indicates how the call was created.
originate(1) - The call was initiated locally with
the system sending the setup request.
Dialout
answer(2) - The call was initiated remotely and
the system received the setup request.
Dialinro Enumeration .1.3.6.1.4.1.9.9.163.1.3.7.1.4 |
cctHistoryConnectionTimeValue of sysUpTime when the system connected the call.ro TimeStamp -- Rsyntax TimeTicks .1.3.6.1.4.1.9.9.163.1.3.7.1.5 |
cctHistoryPhysicalLayerReadyTimeValue of sysUpTime when the physical layer for the call
achieved a steady state and the call is ready for higher
protocol layers to begin.
In the case of modem calls, the physical layer for the
call achieves a steady state when the data rates,
modulations, and error correcting protocols have been
negotiated between the originating and answering modems.
This is primarily intended for calls which connect to a
processing resource identified by cctHistoryResourceSlot
and cctHistoryResourcePort.
It also applies to digital calls using adaptive rate
technologies such as V.110 and V.120.ro TimeStamp -- Rsyntax TimeTicks .1.3.6.1.4.1.9.9.163.1.3.7.1.6 |
cctHistoryServiceUpTimeValue of sysUpTime when the call service type identified
in cctHistoryServiceType was established.ro TimeStamp -- Rsyntax TimeTicks .1.3.6.1.4.1.9.9.163.1.3.7.1.7 |
cctHistoryServiceTypeService associated with the call.
This is the highest level of service known to the system
for the call. The service represents the encapsulation
protocol layer active for the call.
In the case of multiple services on a given call, the last
service activated will be reported.ro CctServiceType -- Rsyntax INTEGER { -- none(1), -- other(2), -- slip(3), -- ppp(4), -- mp(5), -- tcpClear(6), -- telnet(7), -- exec(8), -- l2f(9), -- l2tp(10) -- } .1.3.6.1.4.1.9.9.163.1.3.7.1.8 |
cctHistoryUserValidationTimeValue of sysUpTime when the user identification
associated with this call was validated.
See cctHistoryUserId for description of user
identification.ro TimeStamp -- Rsyntax TimeTicks .1.3.6.1.4.1.9.9.163.1.3.7.1.9 |
cctHistoryUserIdThe User login ID or zero length string if unavailable.
If this contains a non-zero length string, and
cctHistoryUserValidationTime is zero, then the user
failed validation.ro DisplayString .1.3.6.1.4.1.9.9.163.1.3.7.1.10 |
cctHistoryUserIpAddrThe IP address assigned to the cctHistoryUserId for
this call or 0.0.0.0 if not applicable or unavailable.ro IpAddress .1.3.6.1.4.1.9.9.163.1.3.7.1.11 |
cctHistoryUserSubnetMaskThe IP subnet mask assigned to the cctHistoryUserId for
this call or 0.0.0.0 if not applicable or unavailable.ro IpAddress .1.3.6.1.4.1.9.9.163.1.3.7.1.12 |
cctHistoryAccountingSessionIdAccounting session identification assigned to this call
by AAA.
The session ID is sent by AAA to RADIUS as the
Acct-Session-Id attribute or TACACS+ as the task_id.
If no accounting session ID is assigned, the value is a
null string.ro DisplayString .1.3.6.1.4.1.9.9.163.1.3.7.1.13 |
cctHistoryCallCategoryThe call category or typero CctCallCategory -- Rsyntax INTEGER { -- none(1), -- other(2), -- modem(3), -- isdnSync(4), -- v110(5), -- v120(6), -- casDigital(7) -- } .1.3.6.1.4.1.9.9.163.1.3.7.1.14 |
cctHistoryInitialRxRateInitial receive data rate for this call.
If call is a synchronous digital call such as ISDN sync,
this value is the data rate of the B-channel.
If call is asynchronous, even if using a synchronous
transmission medium such as ISDN, the value is
determined by the resource providing the asynchronous
processing. For modem calls, this value corresponds to
the value of cmRXRate from CISCO-MODEM-MGMT-MIB,
immediately after the modem has completed initial
negotiations.
This value does not change, even if the data rate varies
during the call.
This value will be zero if the call terminated prior to
an initial data rate determination.ro Unsigned32 -- Rsyntax Gauge32 -- Units -- bits per second .1.3.6.1.4.1.9.9.163.1.3.7.1.15 |
cctHistoryInitialTxRateInitial transmit data rate for this call.
If call is a synchronous digital call such as ISDN sync,
this value is the data rate of the B-channel.
If call is asynchronous, even if using a synchronous
transmission medium such as ISDN, the value is
determined by the resource providing the asynchronous
processing. For modem calls, this value corresponds to
the value of cmTXRate from CISCO-MODEM-MGMT-MIB,
immediately after the modem has completed initial
negotiations.
This value does not change, even if the data rate varies
during the call.
This value will be zero if the call terminated prior to
an initial data rate determination.ro Unsigned32 -- Rsyntax Gauge32 -- Units -- bits per second .1.3.6.1.4.1.9.9.163.1.3.7.1.16 |
cctHistoryResourceSlotIdentification of processing resource allocated to call.
In the case of a call requiring a modem resource, this is
the value of cmSlotIndex from CISCO-MODEM-MGMT-MIB.
This value along with cctHistoryResourcePort uniquely
identifies a resource port.
Value is -1 if call does not utilize such a resource.ro Integer32(-1..214783647) .1.3.6.1.4.1.9.9.163.1.3.7.1.17 |
cctHistoryResourcePortIdentification of processing resource allocated to call.
In the case of a call requiring a modem resource, this is
the value of cmPortIndex from CISCO-MODEM-MGMT-MIB.
This value along with cctHistoryResourceSlot uniquely
identifies a resource port.
Value is -1 if call does not utilize such a resource.ro Integer32(-1..214783647) .1.3.6.1.4.1.9.9.163.1.3.7.1.18 |
cctHistoryEntrySlotThe device slot containing the port on which the call
existed.ro Integer32 .1.3.6.1.4.1.9.9.163.1.3.7.1.19 |
cctHistoryEntryPortThe physical port within the device slot on which the
call existed.ro Integer32 .1.3.6.1.4.1.9.9.163.1.3.7.1.20 |
cctHistoryEntryDs1The DS1 link containing the call. This may be a DS1
contained within a larger grouping of multiple DS1s
within a single physical port.
If the physical port is of type DS1, this value is
identical to cctActiveEntryPort.
If the DS1 is a logical subinterface within the
physical port, this value is the number of the DS1
within this slot.
Examples:
8 port DS1 card - cctActiveEntryPort and
cctActiveEntryDs1 will have
identical values.
3 port T3 card - cctActiveEntryPort represents
T3 ports.
cctActiveEntryEntryDs1 represents
logical T1 interfaces.
Each T3 contains 28 T1 interfaces.
The T1 interfaces are numbered
sequentially across the entire
T3 card.ro Integer32 .1.3.6.1.4.1.9.9.163.1.3.7.1.22 |
cctHistoryEntryChannelThe channel or timeslot within the cctHistoryEntryDs1
which was allocated to the call.ro Integer32 .1.3.6.1.4.1.9.9.163.1.3.7.1.23 |
cctHistoryCalledPartyIdThe called telephone number for this call.
For calls answered by the system, this corresponds to
the Dialed Number Identification (DNIS).
For calls originated by the system, this is the
destination number.
If not available the string length is zero.ro DisplayString .1.3.6.1.4.1.9.9.163.1.3.7.1.24 |
cctHistoryCallingPartyIdThe calling telephone number for this call.
For calls answered by the system, this corresponds to
the calling identification (CLID).
For calls originated by the system, this is the
number associated with the device.
For the interworking call, this object contains the
translated calling party number if there is a
translation rule is associated with dial plan for making
this outgoing call.
If not available this is a zero-length string.ro DisplayString .1.3.6.1.4.1.9.9.163.1.3.7.1.25 |
cctHistoryMpBundleIdMultilink PPP bundle identification for call if
cctHistoryServiceType has the value 'mp'.
If the value of cctHistoryServiceType for this call is
not 'mp', then the value of this object is not
meaningful.ro Unsigned32 -- Rsyntax Gauge32 .1.3.6.1.4.1.9.9.163.1.3.7.1.26 |
cctHistoryChargedUnitsThe number of charged units for this connection.
For incoming calls or if charging information is
not supplied by the switch, the value of this object
will be zero.ro Gauge32 .1.3.6.1.4.1.9.9.163.1.3.7.1.27 |
cctHistoryReceiveBytesThe number of bytes received on the call. All the
'raw' bytes are counted including any protocol headers
which may or may not be present depending on the value
of cctHistoryServiceType.ro Gauge32 -- Units -- bytes .1.3.6.1.4.1.9.9.163.1.3.7.1.28 |
cctHistoryTransmitBytesThe number of bytes transmitted on the call. All the
'raw' bytes are counted including any protocol headers
which may or may not be present depending on the value
of cctHistoryServiceType.ro Gauge32 -- Units -- bytes .1.3.6.1.4.1.9.9.163.1.3.7.1.29 |
cctHistoryDisconnectTimeValue of sysUpTime when call was disconnected.
This is when the system initiates, detects, or is
notified of call termination.
This is the call duration from initial setup request.ro TimeStamp -- Rsyntax TimeTicks .1.3.6.1.4.1.9.9.163.1.3.7.1.30 |
cctHistoryDisconnectReasonTextText description of the disconnect reason provided.
Value is zero-length string if no text is available.ro DisplayString .1.3.6.1.4.1.9.9.163.1.3.7.1.31 |
cctNotificationConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.163.1.4 |
cctCallSetupTermNotifyEnableThis variable controls generation of
cctCallSetupNotification and
cctCallTerminateNotification.
When this variable is 'true(1)', generation of
these notifications is enabled. When this
variable is 'false(2)', generation is disabled.
The default value is 'false(2)'.rw TruthValue -- Rsyntax INTEGER { -- true(1), -- false(2) -- } .1.3.6.1.4.1.9.9.163.1.4.1 |
cctMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.163.2 |
cctMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.163.2.0 |
cctCallSetupNotificationA Call Tracker Setup notification is generated whenever
a new active call entry is created in the cctActiveTable. TRAP-TYPE .1.3.6.1.4.1.9.9.163.2.0.1 |
cctCallTerminateNotificationA Call Tracker Terminate notification is generated whenever
a new history call entry is created in the cctHistoryTable. TRAP-TYPE .1.3.6.1.4.1.9.9.163.2.0.2 |
cctMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.163.3 |
cctMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.163.3.1 |
cctMIBCompliance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.163.3.1.1 |
cctMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.163.3.2 |
cctGeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.163.3.2.1 |
cctActiveGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.163.3.2.2 |
cctHistoryGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.163.3.2.3 |
cctNotificationConfigGroup OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.163.3.2.4 |