CISCO-CABLE-DSG-IF-MIB
AI MIB Summary
The CISCO-CABLE-DSG-IF-MIB monitors the configuration and operational state of DOCSIS Set-top Gateway (DSG) tunnels and downstream channels to manage Out-of-Band (OOB) messaging for Conditional Access/Point of Deployment (CA/POD) providers. Key metrics include the association of CA vendor indices with tunnel counts, the mapping of input IP addresses to output MAC addresses, and the binding of DSG tunnel indices to specific DOCSIS downstream interface indices (ifIndex).
This is the MIB Module for the DOCSIS Set-top Gateway (DSG). The DSG provides a one-way IP datagram transport for Out-Of-Band (OOB) messaging to cable set-top terminals. The one-way IP datagram transport is called a DSG Tunnel. A DSG Tunnel is a multicast IP datagram stream originating at the DOCSIS Set-top Gateway and carrying Out-Of-Band messages intended for set-top terminals. It is carried over one or more downstream DOCSIS channels and is identified by a well know Ethernet unicast MAC address. The well-known Ethernet unicast MAC address is reserved and published by the Conditional Access/Point Of Deployment (CA/POD) provider. A CA/POD provider is limited to eight DSG Tunnels to transport their OOB Messaging. Multiple DSG Tunnels may exist on a single downstream DOCSIS channel. This MIB is implemented as 3 groups, the CA Vendor Table, the DSG Tunnel Table and the Downstream Table.
1) The DSG CA Vendor Table associates a CA Vendor Name with a CA Vendor Index and the current count of tunnels carrying this CA OOB 2) The DSG Tunnel Table associates an input IP Address and an output MAC Address with a CA Vendor Index. 3) The DSG Downstream Table associates a tunnel Index with a DOCSIS downstream channel interface index (ifIndex).
These tables are all dynamic in nature. Individual rows can be created or deleted as necessary. In general, the DSG is configured once per CA system.
Main OID:
ciscoCableDsgIfMIB.1.3.6.1.4.1.9.10.999
27
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
27 total| Object Name |
|---|
ciscoCableDsgIfMIBThis is the MIB Module for the DOCSIS Set-top Gateway
(DSG). The DSG provides a one-way IP datagram transport
for Out-Of-Band (OOB) messaging to cable set-top terminals.
The one-way IP datagram transport is called a DSG Tunnel.
A DSG Tunnel is a multicast IP datagram stream originating
at the DOCSIS Set-top Gateway and carrying Out-Of-Band
messages intended for set-top terminals. It is carried over
one or more downstream DOCSIS channels and is identified by
a well know Ethernet unicast MAC address. The well-known
Ethernet unicast MAC address is reserved and published
by the Conditional Access/Point Of Deployment (CA/POD)
provider. A CA/POD provider is limited to eight DSG Tunnels
to transport their OOB Messaging. Multiple DSG Tunnels may
exist on a single downstream DOCSIS channel.
This MIB is implemented as 3 groups, the CA Vendor Table,
the DSG Tunnel Table and the Downstream Table.
1) The DSG CA Vendor Table associates a CA Vendor Name with
a CA Vendor Index and the current count of tunnels
carrying this CA OOB
2) The DSG Tunnel Table associates an input IP Address and
an output MAC Address with a CA Vendor Index.
3) The DSG Downstream Table associates a tunnel Index with a
DOCSIS downstream channel interface index (ifIndex).
These tables are all dynamic in nature. Individual rows can
be created or deleted as necessary. In general, the DSG is
configured once per CA system. MODULE-IDENTITY .1.3.6.1.4.1.9.10.999 |
ccdsgIfCaVendor OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.999.1 |
ccdsgIfCaVendorTableThe DSG CA Vendor Table associates a CA Vendor Index
with the CA Vendor Name and the number of tunnels
that carry the CA Vendor's OOB Messaging. SEQUENCE OF CcdsgIfCaVendorEntry .1.3.6.1.4.1.9.10.999.1.1 |
ccdsgIfCaVendorEntryAn entry in the CA Vendor Table. Rows are created
by an SNMP SET request setting the value of
ccdsgifCaVendorRowStatus to 'createAndGo' or
'createAndWait'. Rows are deleted by an SNMP SET
request setting the value of ccdsgifCaVendorRowStatus to
'destroy'. Active CA (that are associated to the tunnel)
cannot be detroyed till association is removed. CcdsgIfCaVendorEntry .1.3.6.1.4.1.9.10.999.1.1.1 |
ccdsgIfCaVendorIndexThe row index into the CA Vendor Table Unsigned32 .1.3.6.1.4.1.9.10.999.1.1.1.1 |
ccdsgIfCaVendorNameThe name of the CA Vendor.rw SnmpAdminString .1.3.6.1.4.1.9.10.999.1.1.1.2 |
ccdsgIfCaVendorTunnelCntThe total count of Tunnel(s) configured for
the CA vendor.
The value 0 implies that no tunnel is currently
configured for this CA vendor.ro Integer32 .1.3.6.1.4.1.9.10.999.1.1.1.3 |
ccdsgIfCaVendorRowStatusThe status of the row. A value of active(1)
indicates that DSG forwards OOB messages onto the
DSG Tunnel.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.10.999.1.1.1.4 |
ccdsgIfTunnel OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.999.2 |
ccdsgIfTunnelTableThe DSG Tunnel Table associates an input IP Address and
an output MAC Address with a CA Vendor Index. SEQUENCE OF CcdsgIfTunnelEntry .1.3.6.1.4.1.9.10.999.2.1 |
ccdsgIfTunnelEntryAn entry in the DSG Tunnel Table. Rows are created by
an SNMP SET request setting the value of
ccdsgIfTunnelRowStatus to 'createAndGo' or 'createAndWait'.
Rows are deleted by an SNMP SET request setting the
value of ccdsgIfTunnelRowStatus to 'destroy'. CcdsgIfTunnelEntry .1.3.6.1.4.1.9.10.999.2.1.1 |
ccdsgIfTunnelIndexThe row index into the DSG Tunnel table. Unsigned32 .1.3.6.1.4.1.9.10.999.2.1.1.1 |
ccdsgIfTunnelInAddressTypeThe type of internet address of ccdsgIfTunnelInIpAddress.
Cannot be changed if the value of ccdsgIfTunnelRowStatus
is active.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.10.999.2.1.1.2 |
ccdsgIfTunnelInIpAddressThe DSG Tunnel Input IP address. Cannot be changed
if the value of ccdsgIfTunnelRowStatus is active.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.9.10.999.2.1.1.3 |
ccdsgIfTunnelMacAddressThe the DSG Tunnel Output MAC address. Cannot be
changed if the value of ccdsgTunnelRowStatus is active.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.9.10.999.2.1.1.4 |
ccdsgIfTunnelCaVendorIndexThe index in ccdsgIfCaVendorTable describing the vendor
information associated with this particular tunnel.
If no associated entry in ccdsgIfCaVendorTable exists,
this object should be zero.rw Unsigned32 .1.3.6.1.4.1.9.10.999.2.1.1.5 |
ccdsgIfTunnelRowStatusThe status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.10.999.2.1.1.6 |
ccdsgIfDownstream OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.999.3 |
ccdsgIfDownstreamTableThe DSG Downstream Table associates a Tunnel Index
with a DOCSIS downstream channel interface index
(ifIndex). It could have a same tunnel associated to
multiple downstream channel and vise versa. SEQUENCE OF CcdsgIfDownstreamEntry .1.3.6.1.4.1.9.10.999.3.1 |
ccdsgIfDownstreamEntryAn entry in the DSG Downstream Table. Rows are
created by an SNMP SET request setting the value
of ccdsgIfDownRowStatus to 'createAndGo' or
'createAndWait'. Rows are deleted by an SNMP SET
request setting the value of ccdsgIfDownRowStatus
to 'destroy'. CcdsgIfDownstreamEntry .1.3.6.1.4.1.9.10.999.3.1.1 |
ccdsgIfDownDsgIndexThe row index into the the downstream DSG table. Unsigned32 .1.3.6.1.4.1.9.10.999.3.1.1.1 |
ccdsgIfDownTunnelIndexThe index in ccdsgIfTunnelTable (ccdsgIfTunnelIndex)
describing the Tunnel information associated with
particular downstream(s).rw Unsigned32 .1.3.6.1.4.1.9.10.999.3.1.1.2 |
ccdsgIfDownIfIndexThe interface index (ifIndex) of this downstream.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.9.10.999.3.1.1.3 |
ccdsgIfDownRowStatusThe status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.9.10.999.3.1.1.4 |
ciscoCableDsgIfConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.999.4 |
ciscoCableDsgIfCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.999.4.1 |
ciscoCableDsgIfGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.999.4.2 |