CISCO-C8500-REDUNDANCY-MIB
AI MIB Summary
The CISCO-C8500-REDUNDANCY-MIB monitors and manages the 1+1 redundancy state of CPU cards and the 2+1 redundancy state of ATM switch fabric cards within the Catalyst 8540 and compatible chassis-based switches. It tracks the operational status and failover readiness of these critical hardware components to ensure continuous switching fabric availability.
This MIB allows management of redundancy of CPU and switch cards for the Catalyst 8540 switch, and other products with similar implementations.
The Catalyst 8540 is an ATM switch. It has 13 (or, in some models, 14) slots, of which 2 slots can hold CPU cards, and 3 (or, in some models, 4) slots can hold switch cards. A switch card is one that contains the ATM switching fabric. Two switch cards are combined to operate in 20Gbps switching mode. For CPU cards, 1+1 redundancy is supported. For switch cards, 2+1 redundancy is supported.
Main OID:
ciscoC8500RedundancyMIB.1.3.6.1.4.1.9.9.105
33
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
33 total| Object Name |
|---|
ciscoC8500RedundancyMIBThis MIB allows management of redundancy of CPU and
switch cards for the Catalyst 8540 switch, and other
products with similar implementations.
The Catalyst 8540 is an ATM switch. It has 13 (or, in
some models, 14) slots, of which 2 slots can hold CPU
cards, and 3 (or, in some models, 4) slots can hold
switch cards. A switch card is one that contains the
ATM switching fabric. Two switch cards are combined
to operate in 20Gbps switching mode.
For CPU cards, 1+1 redundancy is supported.
For switch cards, 2+1 redundancy is supported. MODULE-IDENTITY .1.3.6.1.4.1.9.9.105 |
ciscoC8500RedundancyMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.105.1 |
ccrCpu OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.105.1.1 |
ccrCpuTableThere is an entry in this table for each slot that
can hold a CPU card. SEQUENCE OF CcrCpuEntry .1.3.6.1.4.1.9.9.105.1.1.1 |
ccrCpuEntryRedundancy information for a CPU card. CcrCpuEntry .1.3.6.1.4.1.9.9.105.1.1.1.1 |
ccrCpuSlotIndexIdentifies a chassis slot. RedundancySlotIndex .1.3.6.1.4.1.9.9.105.1.1.1.1.1 |
ccrCpuModeThe redundancy mode of this CPU card.rw RedundancyMode .1.3.6.1.4.1.9.9.105.1.1.1.1.2 |
ccrCpuStatusThe operational status of this CPU card.ro RedundancyStatus .1.3.6.1.4.1.9.9.105.1.1.1.1.3 |
ccrSyncConfigOnSetThe device's running-configuration and
startup-configuration both reside on the active CPU
card. This object indicates whether these
configurations should be copied from the active CPU
to the standby CPU whenever they change. It is
acceptable to copy either, both, or neither.rw Bits .1.3.6.1.4.1.9.9.105.1.1.2 |
ccrCpuStandbyEnableModeThis object is used to allow or disallow the
execution of the enable exec command on the
secondary CPU.
When set to 'true', the enable exec command can be
executed on secondary CPU, and the user may enter
enable mode after keying in the password configured.
When set to 'false', the enable exec command cannot
be executed; thus, no user may enter enabled mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.105.1.1.3 |
ccrCpuSwitchoverTimeThe time taken for the most recent CPU switchover.ro INTEGER .1.3.6.1.4.1.9.9.105.1.1.4 |
ccrForceCounterSyncThis object is used to force the synchronization of
counters from primary CPU to secondary CPU. It should
generally be set just before a controlled Route
Processor Switchover.
When this object is retrieved, the value 'noop' is
returned. When this object is set to 'noop' no
operation is performed.rw Enumeration .1.3.6.1.4.1.9.9.105.1.1.5 |
ccrIfCounterSyncFreqThis object configures the periodicity of interface
counter synchronization from primary CPU to
secondary CPU. Setting this object to 0 will disable
counter synchronization.rw INTEGER .1.3.6.1.4.1.9.9.105.1.1.6 |
ccrVcCounterSyncFreqThis object configures the periodicity of Virtual
Circuit (VC) counter synchronization from primary CPU
to secondary CPU. Setting this object to 0 will
disable counter synchronization.rw INTEGER .1.3.6.1.4.1.9.9.105.1.1.7 |
ccrSigCounterSyncEnableThis object configures the synchronization of ATM
Signalling Statistics from primary CPU to
secondary CPU.
When this object is set to 'true', sychronization
is enabled. When this object is set to 'false',
synchronization is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.105.1.1.8 |
ccrSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.105.1.2 |
ccrSwitchTableThere is an entry in this table for each slot that
can hold a switch card. A 'switch card' is a card that
contains the ATM switch fabric. SEQUENCE OF CcrSwitchEntry .1.3.6.1.4.1.9.9.105.1.2.1 |
ccrSwitchEntryRedundancy information for a switch card. CcrSwitchEntry .1.3.6.1.4.1.9.9.105.1.2.1.1 |
ccrSwitchSlotIndexIdentifies a chassis slot. RedundancySlotIndex .1.3.6.1.4.1.9.9.105.1.2.1.1.1 |
ccrSwitchModeThe redundancy mode of this switch card.rw RedundancyMode .1.3.6.1.4.1.9.9.105.1.2.1.1.2 |
ccrSwitchStatusThe operational status of this switch card.ro RedundancyStatus .1.3.6.1.4.1.9.9.105.1.2.1.1.3 |
ccrSwitchLastSwitchoverTimeThe value of sysUpTime at the last switchover of the
switch cards.
The value is zero if there was no switchover since
agent initialization.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.9.9.105.1.2.2 |
ccrSwitchLastSwitchoverReasonThe reason for the last switch card switchover.
The value is none(1) if there was no switchover since
agent initialization.ro Enumeration .1.3.6.1.4.1.9.9.105.1.2.3 |
ccrSwitchBwThe switching capacity (i.e., bandwidth) of the
switch fabric.
tenGbps(1) - 10 Gigabits/sec
twentyGbps(2) - 20 Gigabits/sec.ro Enumeration .1.3.6.1.4.1.9.9.105.1.2.4 |
ccrDesiredSwitchBwThe desired switching capacity (i.e., bandwidth) of
the switch fabric.
tenGbps(1) - 10 Gigabits/sec
twentyGbps(2) - 20 Gigabits/sec
If the value configured by writing to this object is
supported by the device, it will be applied at the
next reboot. The speed at which the switch fabric is
currently operating is reflected by the value of
ccrSwitchBw.rw Enumeration .1.3.6.1.4.1.9.9.105.1.2.5 |
ciscoC8500RedundancyMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.105.2 |
ccrMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.105.2.0 |
ccrCpuStatusChangeThis notification is generated when the value of
ccrCpuStatus changes for a CPU card.
The varbind indicates the current status of the
affected card. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.105.2.0.1 |
ccrSwitchStatusChangeThis notification is generated when the value of
ccrSwitchStatus changes for a switch card.
The varbind indicates the current status of the
affected card. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.105.2.0.2 |
ccrSwitchModeChangeThis notification is generated when the value of
ccrSwitchMode changes from active(1) to either
standby(2) or unused(3) or notPresent(4).
The varbind indicates the current mode of the
affected card. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.105.2.0.3 |
ciscoC8500RedundancyMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.105.3 |
ciscoC8500RedundancyMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.105.3.1 |
ciscoC8500RedundancyMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.105.3.2 |