CISCO-BCP-MIB
AI MIB Summary
The CISCO-BCP-MIB module enables monitoring and management of Bridge Control Protocol (BCP) instances and associated state transitions on Cisco network devices, tracking operational parameters defined in RFC 2878. It provides access to managed objects for configuring and observing BCP session states, timers, and error counters to ensure Layer 2 bridging protocol integrity.
This MIB module describes the Managed Objects for of Bridge Control Protocol (RFC2878). This MIB is influenced by RFC1474.
Main OID:
ciscoBcpMIB.1.3.6.1.4.1.9.9.275
24
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
24 total| Object Name |
|---|
ciscoBcpMIBThis MIB module describes the Managed Objects for
of Bridge Control Protocol (RFC2878). This MIB is
influenced by RFC1474. MODULE-IDENTITY .1.3.6.1.4.1.9.9.275 |
ciscoBcpMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.275.1 |
bcpOperTableTable containing the status of the local BCP entity
that is related to the operation of Bridging Control
Protocol. SEQUENCE OF BcpOperEntry .1.3.6.1.4.1.9.9.275.1.1 |
bcpOperEntryOperational status information for a particular BCP
link. For all entries in ifTable with ifType ppp(23),
there will be an entry in this table. BcpOperEntry .1.3.6.1.4.1.9.9.275.1.1.1 |
bcpOperStatusThe operational status of the Bridge Control
Protocol. The possible values are :
open(1) - the BCP link is up and both ends
are configured in the compatible manner.
closed(2) - the BCP link is down and neither
ends are configured.
listening(3) - the local BCP entity is configured
and the remote end is not configured compatibly.ro Enumeration .1.3.6.1.4.1.9.9.275.1.1.1.1 |
bcpConfigTableTable containing the configuration information
for the local BCP entity that is related to
the operation of Bridging over the PPP link. SEQUENCE OF BcpConfigEntry .1.3.6.1.4.1.9.9.275.1.2 |
bcpConfigEntryBridging Configuration information for a
particular BCP link. For all entries in
ifTable with ifType ppp(23), there will be an
entry in this table. BcpConfigEntry .1.3.6.1.4.1.9.9.275.1.2.1 |
bcpConfigBridgeIdControlThe Bridge-Identification configuration option
is designed for use when the line is an
interface between half bridges connecting
virtual or physical LAN segments.
When enabled the local BCP entity initiates a
Bridge Identification Option negotiation.rw Enumeration .1.3.6.1.4.1.9.9.275.1.2.1.1 |
bcpConfigBridgeIdThe bridge number of the local BCP entity.
This value is meaningful only when the local
BCP entity has negotiated the BridgeId
Configuration option, which means the value
of bcpConfigBridgeIdControl is enabled(1).
The two half bridges must agree on the bridge
number.rw Unsigned32 .1.3.6.1.4.1.9.9.275.1.2.1.2 |
bcpConfigLineIdControlThe Line-Identification configuration option
is designed for use when the line is assigned
a LAN segment number.
When enabled the local BCP entity initiates
a Line Identification Option negotiation.rw Enumeration .1.3.6.1.4.1.9.9.275.1.2.1.3 |
bcpConfigLineIdThe LAN segment number of the local BCP entity.
This value is meaningful only when the local
BCP entity negotiated the LineId Configuration
option, which means the value of
bcpConfigLineIdControl is enabled(1).
The two half bridges must agree on the LAN
segment number.rw Unsigned32 .1.3.6.1.4.1.9.9.275.1.2.1.4 |
bcpConfigMacSupportThe Mac-Support configuration option is
provided to permit implementations to
indicate the sort of traffic they are
prepared to receive.
When enabled the local BCP entity initiates
a Mac-Support Option negotiation.rw Enumeration .1.3.6.1.4.1.9.9.275.1.2.1.5 |
bcpConfigMacTypeThe MAC type that this local BCP entity is
prepared to receive and service.
This value is meaningful only when the local
BCP entity has negotiated the MAC-Support
Configuration option, which means the value
of bcpConfigMacSupport is enabled(1).
These values definition are specified in the
most recent RFC1700.rw Enumeration .1.3.6.1.4.1.9.9.275.1.2.1.6 |
bcpConfigTinygramThe Tinygram-Compression configuration option
permits implementations to indicate support
for Tinygram Compression.
When enabled the local BCP Entity initiates
a Tinygram-Compression Option negotiation.rw Enumeration .1.3.6.1.4.1.9.9.275.1.2.1.7 |
bcpConfigMacAddressControlThe Mac-Address configuration option enables
the implementations to announce its MAC address
or have one assigned.
When enabled the local BCP Entity initiates
a Mac-Address Option negotiation.rw Enumeration .1.3.6.1.4.1.9.9.275.1.2.1.8 |
bcpConfigMacAddressThis value is meaningful only when the local
BCP entity has negotiated the MAC-Address
configuration option, which means the value
of bcpConfigMacAddressControl is enabled(1).
If it is non-zero format, the local BCP get
its MAC address announced. It is represented
in IEEE 802.1 Canonical format.
If it is in zero format, i.e. 00-00-00-00-00-00
then the implementation of the system wishes to
have a MAC address assigned.rw DisplayString .1.3.6.1.4.1.9.9.275.1.2.1.9 |
bcpConfigSpanTreeControlThe Spanning-Tree-Protocol configuration option
enables a bridge to remain compatible with
older implementations of BCP.
When enabled the local BCP Entity initiates
a Spanning-Tree-Protocol Option negotiation.rw Enumeration .1.3.6.1.4.1.9.9.275.1.2.1.10 |
bcpConfigSpanTreeThe desired spanning tree protocol of the local
BCP entity. The listing values of the Spanning-
Tree Protocol are specified in the most recent
RFC1700.
This value is meaningful only when the local BCP
entity has negotiated the Spanning-Tree-Protocol
configuration option, which means the value of
bcpConfigSpanTreeControl is enabled(1).rw Enumeration .1.3.6.1.4.1.9.9.275.1.2.1.11 |
bcpConfigIeee802dot1qTaggedThe IEEE-802-Tagged-Frame configuration option
permits the implementation to support for IEEE
802.1q Tagged Frame.
When enabled the local BCP Entity initiates
a IEEE-802-Tagged-Frame Option negotiation.rw Enumeration .1.3.6.1.4.1.9.9.275.1.2.1.12 |
bcpConfigMgmtInlineThe Management-Inline configuration option
indicates that the system is willing to receive
any IEEE-defined inter-bridge protocols.
When enabled if the local BCP Entity initiates
a Management-Inline Option negotiation.rw Enumeration .1.3.6.1.4.1.9.9.275.1.2.1.13 |
bcpConfigBCPacketIndicatorThe Bridge Control Packet Indicator
configuration option permits the implementation
to indicate support for Bridge Control Packet
Indicator.
When enabled the local BCP Entity initiates
a Bridge Control Packet Indicator Option
negotiation.rw Enumeration .1.3.6.1.4.1.9.9.275.1.2.1.14 |
cBcpMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.275.3 |
cBcpMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.275.3.1 |
cBcpMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.275.3.2 |