CISCO-ATM-IF-MIB
AI MIB Summary
The CISCO-ATM-IF-MIB provides management and monitoring capabilities for Cisco ATM interface configurations, enabling the retrieval of operational parameters such as VPI/VCI mappings, PVC status, traffic shaping policies, and cell loss statistics. This module facilitates the administration of Asynchronous Transfer Mode (ATM) subinterfaces and virtual circuits within Cisco IOS-based networking equipment.
A MIB module for an ATM interface configuration.
Main OID:
ciscoAtmIfMIB.1.3.6.1.4.1.9.10.14
41
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
41 total| Object Name |
|---|
ciscoAtmIfMIBA MIB module for an ATM interface configuration. MODULE-IDENTITY .1.3.6.1.4.1.9.10.14 |
ciscoAtmIfMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.10.14.1 |
ciscoAtmIfTableThis table contains ATM local interface configuration
parameters, one entry per ATM interface port. SEQUENCE OF CiscoAtmIfEntry .1.3.6.1.4.1.9.10.14.1.1 |
ciscoAtmIfEntryThis list conatins additonal ATM interface configuration
parameters and state variables. CiscoAtmIfEntry .1.3.6.1.4.1.9.10.14.1.1.1 |
ciscoAtmIfTypeThe type of ATM interface which is either a UNI
(User to Network), PNNI, IISP or NNI PVC only.
To modify the ciscoAtmIftype, ifAdminStatus has
to be down and atmIfIlmiAutoConfiguration disabled.rw Enumeration .1.3.6.1.4.1.9.10.14.1.1.1.1 |
ciscoAtmIfSideThe side of ATM interface which is either a user or
network side.NotApplicable value implies that
ciscoAtmIftype is other than uni or iisp.rw Enumeration .1.3.6.1.4.1.9.10.14.1.1.1.2 |
ciscoAtmIfUniTypeThe type of User to Network interface is either
private or public. If ciscoAtmIfType is not uni
then ciscoAtmIfUniType value should be ignored.rw Enumeration .1.3.6.1.4.1.9.10.14.1.1.1.3 |
ciscoAtmIfPVPsThe number of permanent virtual paths at this
interface.ro Integer32 .1.3.6.1.4.1.9.10.14.1.1.1.4 |
ciscoAtmIfPVCsThe number of permanent virtual channels at this
interface.ro Integer32 .1.3.6.1.4.1.9.10.14.1.1.1.5 |
ciscoAtmIfActiveSVPsThe number of active switched virtual paths at
this interface.ro Gauge32 .1.3.6.1.4.1.9.10.14.1.1.1.6 |
ciscoAtmIfActiveSVCsThe number of active switched virtual channels at
this interface.ro Gauge32 .1.3.6.1.4.1.9.10.14.1.1.1.7 |
ciscoAtmIfTotalConnectionsThe total number of existing connections at
this interface.ro Gauge32 .1.3.6.1.4.1.9.10.14.1.1.1.8 |
ciscoAtmIfConfVplIfThe number of configured VP interfaces at this physical
interface.ro Integer32 .1.3.6.1.4.1.9.10.14.1.1.1.9 |
ciscoAtmIfPortTypeThe type of physical layer medium on the port.ro Enumeration .1.3.6.1.4.1.9.10.14.1.1.1.10 |
ciscoAtmIfXmitLedThe transmit LED color of this port.ro Enumeration .1.3.6.1.4.1.9.10.14.1.1.1.11 |
ciscoAtmIfRecvLedThe receive LED color of this port.ro Enumeration .1.3.6.1.4.1.9.10.14.1.1.1.12 |
ciscoAtmIfXmitCellsThe number of cells transmitted of this interface,
including p2p and p2mp cells.ro Counter32 .1.3.6.1.4.1.9.10.14.1.1.1.13 |
ciscoAtmIfRecvCellsThe number of cells received of this interface,
including p2p and p2mp cells.ro Counter32 .1.3.6.1.4.1.9.10.14.1.1.1.14 |
ciscoAtmIfSvcMinVciThe minimum of the range of values from which VCI's
are assigned to new SVC connections. By this value
being larger, more VCI's are reserved for setting up
PVCs. This applies to every VPI of the physical
interface and every logical port.
The object is deprecated because it is recommended to
use ciscoAtmInterfaceConfMinSvccVci of the
CISCO-ATM2-MIB which is meant for the same purpose.rodeprecated INTEGER .1.3.6.1.4.1.9.10.14.1.1.1.15 |
ciscoAtmIfIlmiConfigurationEnable/Disable ILMI configuration on this interface.
The configuration takes effect only on the next
interface restart. Disabling this object will also
disable atmIfIlmiAddressRegistration and
atmIfIlmiAutoConfiguration and atmIfIlmiKeepAliverw Enumeration .1.3.6.1.4.1.9.10.14.1.1.1.16 |
ciscoAtmIfIlmiAddressRegistrationEnable/Disable ILMI Address Registration on on
this interface. The configuration takes effect only
on the next interface restart.rw Enumeration .1.3.6.1.4.1.9.10.14.1.1.1.17 |
ciscoAtmIfIlmiAutoConfigurationEnable/Disable ILMI link and interface type
determination. The configuration takes effect only on
the next interface restart.rw Enumeration .1.3.6.1.4.1.9.10.14.1.1.1.18 |
ciscoAtmIfIlmiKeepAliveThe amount of time that should elapse between
successive ILMI keepalive messages sent on this
interface. A value of 0 disables ILMI keepalive messages
on this interface.rw Integer32 .1.3.6.1.4.1.9.10.14.1.1.1.19 |
ciscoAtmIfSoftVcDestAddressThe 20 byte ATM address of the destination ATM
interface for soft ATM PVC/PVPro NsapAtmAddr .1.3.6.1.4.1.9.10.14.1.1.1.20 |
ciscoAtmIfUniSignallingVersionThe version of UNI signalling that is currently
being used on the interface. The appropriate
value, either atmfUni3Dot0, atmfUni3Dot1 or
atmfUni4Dot0, is used when the interface is
an UNI or IISP interface. The value notApplicable
is used when the interface is a PNNI interface or
when signalling is disabled. This may reflect a
manually configured value for the signalling
version, or may be determined by other means
such as auto-configuration.Setting this
variable to a value of 'notApplicable' is not
allowed. To modify the
ciscoAtmIfUniSignallingVersion, ifAdminStatus
has to be down and
atmIfIlmiAutoConfiguration disabled.rw Enumeration .1.3.6.1.4.1.9.10.14.1.1.1.21 |
ciscoAtmIfSvcUpcIntentDetermines the policing (Usage Parameter Control or UPC)
action to take for SVCs established through this
interface. Values other than passing are allowed only if
policing is supported on the interface. Also serves to
determine UPC to use on the terminating (destination)
half-leg of Soft PVCs.
This object has been deprecated in favor of the per-service
category objects ciscoAtmIfSvcUpcIntentCbr,
ciscoAtmIfSvcUpcIntentVbrRt, ciscoAtmIfSvcUpcIntentVbrNrt,
ciscoAtmIfSvcUpcIntentAbr, ciscoAtmIfSvcUpcIntentUbr.
Note that if those objects are set to different values,
the return value for this object cannot be correct.rwdeprecated Enumeration .1.3.6.1.4.1.9.10.14.1.1.1.22 |
ciscoAtmIfAddressTypeAn indication of the type of the ATM
addresses on this interface. To configure a new
atm address, set ciscoAtmIfAddress to the
address, then set this object to ether nsap(1),
or esi(2), or e164(3), depending on the type
of address of ciscoAtmIfAddress.
To delete the address, set this object to
null(4).
Adding nsap address type to this interface has the effect
of canceling the existing esi address, if there is one.
Similarly, adding the esi address on this interface also
has the effect of removing the existing nsap address.
The value of ciscoAtmIfAddress has no effect when
this object is set to null(4).
For the switch, the nsap/esi address can only exist on
the cpu port for signalling applications.rwobsolete Enumeration .1.3.6.1.4.1.9.10.14.1.1.1.23 |
ciscoAtmIfAddressThe ATM address of this interface, which
can be either nsap, esi or e164.
For the switch, the nsap/esi address can only
exist on the cpu port.rwobsolete OCTET STRING .1.3.6.1.4.1.9.10.14.1.1.1.24 |
ciscoAtmIfWellKnownVcModeIndicates whether well-known VCs should be
automatically or manually created for the
interface.
In automatic(1) mode, well-known VCs will be
created with default VPI/VCI values upon startup or
upon entry to the automatic mode. While in this
mode, well-known VCs will not be allowed to be
deleted or modified by user commands. This is
the default mode at startup for equipment which
supports automatic well-known VC creation.
In manual(2) mode, well-known VCs won't be
automatically created. Instead, the user will be
allowed to delete and create PVCs with the
reserved encapsulation types aalQsAal, aal5Ilmi,
and aal5Pnni as applicable. And
these PVCs will be allowed to have VCI values
in the range <5-16383>, instead of <32-16383>.
The manualDeleteUponEntry(3) action causes
any existing VCs with reserved encapsulation
types (aalQsAal, aal5Ilmi or aal5Pnni) to be
deleted for this interface as it enters
the manual state.rw Enumeration .1.3.6.1.4.1.9.10.14.1.1.1.31 |
ciscoAtmIfSignallingAdminStatusEnable/Disable signalling/sscop on this interface.The
disabled(2) action causes all the active SVCs on
this interface to be cleared.rw Enumeration .1.3.6.1.4.1.9.10.14.1.1.1.32 |
ciscoAtmIfCdLedThe Cd LED color of this port.ro Enumeration .1.3.6.1.4.1.9.10.14.1.1.1.33 |
ciscoAtmIfIlmiAccessFilterThe access filter which allows or denies certain
ILMI registered addresses on this interface when
ciscoAtmIfIlmiAddressRegistration is set to enable(1).
permitAll - This permits all ILMI registered addresses.
permitPrefix - The address being registered by ILMI
should have their prefix portion of the address match
the ILMI prefixes used on this interface. If there
are any per-interface ILMI address prefixes
configured, then the prefixes derived from the
switch addresses are not considered ILMI prefixes for
this interface.
permitPrefixAndWellknownGroups - This is same as
'permitPrefix' but in addition it also allows the
well-known group addresses. The well-known group
addresses will be the old LECS address and any address
matching the ATM Forum address prefix for well known
addresses.
(i.e.,C5.0079.0000.0000.0000.0000.0000.00A03E)
permitPrefixAndAllGroups - This is same
as 'permitPrefix' but in addition it allows all
group addresses.
useGlobalDefaultFilter - It indicates that this
interface uses the per-switch global default
filterrw Enumeration .1.3.6.1.4.1.9.10.14.1.1.1.34 |
ciscoAtmIfConfigAESAThe ATM End System Address (AESA) of this interface
can be configured by entering the full 20 octet AESA,
or the 6 octet ESI and 1 octet Selector Byte.
If the ESI and Selector Byte are entered, the full AESA
will be formed using a 13 octet prefix from ILMI.
The full AESA can be read using ciscoAtmIfDerivedAESA.
A length of zero indicates that no AESA is configured.
For the switch, the AESA address can only
exist on the cpu port.rw OCTET STRING .1.3.6.1.4.1.9.10.14.1.1.1.35 |
ciscoAtmIfDerivedAESAThe ATM End System Address (AESA) of this interface.
The AESA is configured using ciscoAtmIfConfigAESA
or can be automatically generated.
A length of zero indicates that no AESA is specified.
For the switch, the AESA address can only
exist on the cpu port.ro AtmAddr .1.3.6.1.4.1.9.10.14.1.1.1.36 |
ciscoAtmIfE164AddressThe ATM E164 address of this interface.
When a native E.164 number is configured for this
inteface, only native E.164 numbers are
transmitted/received as the called/calling party
numbers. The presence of an ATM E164 address allows
both an algorithmic translation between the native E164
number and E164 AESA address formats (see
ciscoAtmIfE164AutoConversionOnly) and use of the ATM
E164 Address for the calling/called party number of
transmitted/received calls. Entering an address will
disable ciscoAtmIfE164AutoConversionOnly.
An address of length zero indicates that no address is
specified.
For the switch, the E164 address cannot
exist on the cpu port.rw AtmAddr .1.3.6.1.4.1.9.10.14.1.1.1.37 |
ciscoAtmIfE164AutoConversionOnlyEnable/Disable E164 auto conversion only on this
interface.
The E164 auto-conversion allows for algorithmic
translation between the native E164 number and E164
AESA address formats.
This object is used when there is no native E.164
number specified for this interface (see
ciscoAtmIfE164Address), to specify that only native
E.164 numbers are transmitted/received as the
called/calling party numbers and to enable/disable
E164 auto-conversion.
For the switch, E164 auto-conversion cannot
exist on the cpu port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.10.14.1.1.1.38 |
ciscoAtmIfRxCellUpcViolationsThe total number of nonconforming cells detected by
Usage Parameter Control (UPC) for cells received on
this interface. This object is not instantiated on
systems that do not have support for collecting such
statistics.ro Counter32 .1.3.6.1.4.1.9.10.14.1.1.1.39 |
ciscoAtmIfRxCellDiscardsThe total number of cells that were discarded
within the switch. The cells can be discarded
due to non conformance detected by Usage Parameter
Control (UPC) or queue overflows within the switch.
This object is not instantiated on systems that do
not have support for collecting such statistics.ro Counter32 .1.3.6.1.4.1.9.10.14.1.1.1.40 |
ciscoAtmIfIlmiAccessGlobalDefaultFilterThe global default access filter which set the per-switch
default access filter for ILMI address registration
on all interfaces.
permitAll - This permits all ILMI registered addresses.
permitPrefix - The address being registered by ILMI
should have their prefix portion of the address match
the ILMI prefixes used on this interface. If there
are any per-interface ILMI address prefixes
configured, then the prefixes derived from the
switch addresses are not considered ILMI prefixes for
this interface.
permitPrefixAndWellknownGroups - This is same as
'permitPrefix' but in addition it also allows the
well-known group addresses. The well-known group
addresses will be the old LECS address and any address
matching the ATM Forum address prefix for well known
addresses.
(i.e.,C5.0079.0000.0000.0000.0000.0000.00A03E)
permitPrefixAndAllGroups - This is same
as 'permitPrefix' but in addition it allows all
group addresses.rw Enumeration .1.3.6.1.4.1.9.10.14.1.2 |
ciscoAtmIfNotifsEnabledAllows enabling/disabling of notifications for ATM
Interface eventsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.10.14.1.3 |
ciscoAtmIfIlmiFSMStateThe ILMI states meaningful when the value of
ciscoAtmIfIlmiConfiguration indicates that the ILMI
is enabled for an ATM interface:
down
interface down
restarting
waitDevType
deviceAndPortTypeComplete
and/or port type
awaitPnniConfig
from peer
pnniConfigComplete
configuration
awaitRestartAck
after restart
upAndNormal
::= { ciscoAtmIfEntry 41 }
ciscoAtmIfIlmiUpDownChanges OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTIONro Enumeration .ciscoAtmIfMIBGroups.11 |