Home/Catalog/CISCO-AON-STATUS-MIB

CISCO-AON-STATUS-MIB

AI MIB Summary

The CISCO-AON-STATUS-MIB enables SNMP monitoring of Cisco Application Oriented Networking (AON) nodes to track registration states (unregistered, registered, active, inactive) and collect data plane performance counters, including message throughput, Policy Execution Plan (PEP) deployment counts, and endpoint delivery statistics. These metrics facilitate the operational oversight of AON cloud architectures by providing visibility into the health and traffic processing status of Entry, Intermediate, and Exit nodes.

This MIB module defines managed objects that facilitate the management of AON node. The information available through this MIB includes o AON node state i.e., whether the AON node is 'unregistered', 'registered', 'active', 'inactive'. o Node metrics information when a node is in the 'active' state. o The node metrics information includes the number of messages received by the node, number of PEPs deployed and number of messages received by a PEP as well as information about the end points that the messages are delivered to. The metrics are reset when the AON data plane is restarted. The following terms are used throughout this MIB: AON : Application Oriented Networking. _____________ | AON | | Management | | Console | |____________| | | | | ____ |____________________________ | | AON Node | | __V_________ _________ | | | | | | | | | AON | | AON | | | | Management|>| Data | | | | Agent | | Plane | | | |___________ |________| | | | |_________________________________| Figure 1 : AON AON data plane: This is the piece of software that runs on the AON node and is responsible for processing application message traffic. AMC : AON Management Console. A Web-based application used to manage the AON installation, upgrade, and operation. This is also referred to as the AON Management Plane. AMA : AON Management Agent. An agent that runs on the AON node and acts as intermediary between the AON data plane and the AMC. AON Node : An AON node is either a single device (blade or appliance) or a virtual cluster of devices (blades or appliances) that are running the AON software. AON Cloud : A group of AON nodes that are connected together via NextHop configuration is referred to as an AON cloud. _____________ _____________ | Source | | Destination | | End point | | End point | | Application | | Application | | ____________| |_____________| _____|________________________________^_____ ( | AON Cloud | ) ( __V______ ________ ____|___ ) ( | | | | | | ) ( | AON | | AON | | AON | ) ( | Entry | | Inter- | | Exit | ) ( | Node | | mediate| | Node | ) ( | |>| Node |>| | ) ( | | | | | | ) ( | | | | | | ) ( |_______ | |_______ | |________| ) ( ) ( ) (___________________________________________ ) Figure 2: AON Cloud Entry Node : The first node in an AON cloud, generally the one closest to the client, is known as the Entry Node. This node is also sometimes referred to as the Client Proxy. Exit Node : The ultimate node in an AON cloud, generally the one closest to the server, is known as the Exit Node. This node is also sometimes referred to as the Server Proxy. Intermediate Node : Any AON node in an AON cloud that is neither directly communicating with the client or the server (i.e. neither an Entry Node nor an Exit Node) is known as an Intermediate Node. PEP : Policy Execution Plan. A PEP is a sequence of bladelets that determine how a message is processed in AON. MEP : Message Exchange Pattern. MEP describes the pattern of messages required by a communications protocol to establish or use a communication channel. There are two major message exchange patterns: a request response pattern, and a one way pattern. Bladelet : A bladelet is a piece of software that performs a specific message handling function. Bladelets are combined together into PEPs. Send Bladelet : Routing bladelet that sends a message to a selected destination. Notify Bladelet : Bladelet for generating a custom notification (either as SNMP trap or email) based on user specified condition. NamedException : A NamedException is exposed by a bladelet as connection points to identify a recoverable exception. The action to handle a NamedException thrown by a bladelet can be explicitly designed in the PEP by associating a execution path which comprises of a series of bladelet. Exception Block : It is the block in the PEP that is marked by the exception marker and which is executed in case of a bladelet exception that is not a NamedException that has an output path associated with it. URI : Uniform Resource Identifier. A URI (Uniform Resource Identifier) is the way you identify any content in the Internet space, whether it be a page of text, a video or sound clip, a still or animated image, or a program. The most common form of URI is the Web page address, which is a particular form or subset of URI called a Uniform Resource Locator (URL). A URI typically describes: * mechanism used to access the resource * specific computer that the resource is housed in * specific name of the resource (a file name) on the computer. URL : Uniform Resource Locator. A URL (Uniform Resource Locator) is the unique Internet address for a file. The URL contains the name of the protocol to be used to access the file resource, a domain name that identifies a specific computer on the Internet, and a pathname, a hierarchical description that specifies the location of a file in that computer. End point: An end point is an application that is either a sender (client) or a receiver (server) of messages that communicates with AON.
Main OID:
ciscoAonStatusMIB.1.3.6.1.4.1.9.9.646
50
Objects
Active
Status
7
Dependencies

Imported Objects

Objects

50 total
Object Name
ciscoAonStatusMIBThis MIB module defines managed objects that facilitate the management of AON node. The information available through this MIB includes o AON node state i.e., whether the AON node is 'unregistered', 'registered', 'active', 'inactive'. o Node metrics information when a node is in the 'active' state. o The node metrics information includes the number of messages received by the node, number of PEPs deployed and number of messages received by a PEP as well as information about the end points that the messages are delivered to. The metrics are reset when the AON data plane is restarted. The following terms are used throughout this MIB: AON : Application Oriented Networking. _____________ | AON | | Management | | Console | |____________| | | | | ____ |____________________________ | | AON Node | | __V_________ _________ | | | | | | | | | AON | | AON | | | | Management|>| Data | | | | Agent | | Plane | | | |___________ |________| | | | |_________________________________| Figure 1 : AON AON data plane: This is the piece of software that runs on the AON node and is responsible for processing application message traffic. AMC : AON Management Console. A Web-based application used to manage the AON installation, upgrade, and operation. This is also referred to as the AON Management Plane. AMA : AON Management Agent. An agent that runs on the AON node and acts as intermediary between the AON data plane and the AMC. AON Node : An AON node is either a single device (blade or appliance) or a virtual cluster of devices (blades or appliances) that are running the AON software. AON Cloud : A group of AON nodes that are connected together via NextHop configuration is referred to as an AON cloud. _____________ _____________ | Source | | Destination | | End point | | End point | | Application | | Application | | ____________| |_____________| _____|________________________________^_____ ( | AON Cloud | ) ( __V______ ________ ____|___ ) ( | | | | | | ) ( | AON | | AON | | AON | ) ( | Entry | | Inter- | | Exit | ) ( | Node | | mediate| | Node | ) ( | |>| Node |>| | ) ( | | | | | | ) ( | | | | | | ) ( |_______ | |_______ | |________| ) ( ) ( ) (___________________________________________ ) Figure 2: AON Cloud Entry Node : The first node in an AON cloud, generally the one closest to the client, is known as the Entry Node. This node is also sometimes referred to as the Client Proxy. Exit Node : The ultimate node in an AON cloud, generally the one closest to the server, is known as the Exit Node. This node is also sometimes referred to as the Server Proxy. Intermediate Node : Any AON node in an AON cloud that is neither directly communicating with the client or the server (i.e. neither an Entry Node nor an Exit Node) is known as an Intermediate Node. PEP : Policy Execution Plan. A PEP is a sequence of bladelets that determine how a message is processed in AON. MEP : Message Exchange Pattern. MEP describes the pattern of messages required by a communications protocol to establish or use a communication channel. There are two major message exchange patterns: a request response pattern, and a one way pattern. Bladelet : A bladelet is a piece of software that performs a specific message handling function. Bladelets are combined together into PEPs. Send Bladelet : Routing bladelet that sends a message to a selected destination. Notify Bladelet : Bladelet for generating a custom notification (either as SNMP trap or email) based on user specified condition. NamedException : A NamedException is exposed by a bladelet as connection points to identify a recoverable exception. The action to handle a NamedException thrown by a bladelet can be explicitly designed in the PEP by associating a execution path which comprises of a series of bladelet. Exception Block : It is the block in the PEP that is marked by the exception marker and which is executed in case of a bladelet exception that is not a NamedException that has an output path associated with it. URI : Uniform Resource Identifier. A URI (Uniform Resource Identifier) is the way you identify any content in the Internet space, whether it be a page of text, a video or sound clip, a still or animated image, or a program. The most common form of URI is the Web page address, which is a particular form or subset of URI called a Uniform Resource Locator (URL). A URI typically describes: * mechanism used to access the resource * specific computer that the resource is housed in * specific name of the resource (a file name) on the computer. URL : Uniform Resource Locator. A URL (Uniform Resource Locator) is the unique Internet address for a file. The URL contains the name of the protocol to be used to access the file resource, a domain name that identifies a specific computer on the Internet, and a pathname, a hierarchical description that specifies the location of a file in that computer. End point: An end point is an application that is either a sender (client) or a receiver (server) of messages that communicates with AON.
MODULE-IDENTITY
.1.3.6.1.4.1.9.9.646
ciscoAonStatusMIBNotifs
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.646.0
caonUpcaonUp notification is sent when AON data plane is bootstrapped successfully and AON is ready to process messages.
NOTIFICATION-TYPE
.1.3.6.1.4.1.9.9.646.0.1
caonDowncaonDown notification is sent when AON data plane goes down. AON data plane might be down as a result of an administrative command i.e. stopping AON via CLI command or deactivating the node from AMC or due to abnormal termination of AON data plane. If there is a hardware failure on the AON box then the notification might not be triggered.
NOTIFICATION-TYPE
.1.3.6.1.4.1.9.9.646.0.2
caonNewPepDeployedThis notification is sent if a new PEP is deployed after AON has bootstrapped successfully. caonPepName identifies the name of the new PEP.
NOTIFICATION-TYPE
.1.3.6.1.4.1.9.9.646.0.3
caonMessageDeliveryFailedThis notification is sent if a message cannot be delivered to the end point. caonMessageEndPointURL identifies the end point to which the message was being delivered to. The message source is either identified by caonMessageSrcUri or (caonMessageSrcIpAddr and caonMessageSrcPort).
NOTIFICATION-TYPE
.1.3.6.1.4.1.9.9.646.0.4
caonSendResponseThresholdExceededThis notification is sent if the destination end point response time exceeds the threshold value specified in the Send Bladelet. caonPepEndPointUrl identifies the URI of the end point the message was being delivered to. caonSendResponseThreshold identifies the end point response time threshold value configured in the Send bladelet.
NOTIFICATION-TYPE
.1.3.6.1.4.1.9.9.646.0.5
caonCustomNotificationThis notification could be triggered during PEP execution. Currently this is triggered from the Notify Bladelet if the customer specified condition evaluates to true and the notification type selected is SNMP. This provides a way to extend the AON platform to generate customer defined notifications based on customer specified conditions. caonNotificationName identifies the name of the customer defined notification type. caonNotificationText identifies the notification text for the custom notification.
NOTIFICATION-TYPE
.1.3.6.1.4.1.9.9.646.0.6
ciscoAonStatusMIBObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.646.1
caonSystemInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.646.1.1
caonNodeStateThis object indicates the node state. 'unregistered': Node is not yet registered with AMC. 'registered' : Node has registered with AMC but is not yet activated. 'active' : Node has been activated from AMC and is ready to process messages. 'inactive' : Node has been activated from AMC but AON process is down.ro
Enumeration
.1.3.6.1.4.1.9.9.646.1.1.1
caonBootTimeThis object indicates the value of sysUpTime when the AON data plane was bootstrapped successfully.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.9.9.646.1.1.2
caonLastActivateTimeThis object indicates the local time at the node when the node was last activated from AMC.ro
DateAndTime (SNMPv2-TC)
.1.3.6.1.4.1.9.9.646.1.1.3
caonReceivedMessagesThis object indicates the aggregate count of messages received by the node. This includes all the messages for which a PEP was executed as well as the messages that were pass-through and did not involve any PEP invocation. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of caonCounterDiscontinuityTime object.ro
Counter32 UNITS "messages"
.1.3.6.1.4.1.9.9.646.1.1.4
caonAmcIpAddressTypeThis object indicates the type of IP address by which the AMC for the node is reachable.ro
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.9.9.646.1.1.5
caonAmcIpAddressThis object indicates the IP Address of the AMC managing this node. The type of this address is determined by the value of caonAmcIpAddressType objectro
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.9.9.646.1.1.6
caonPepCountThis object indicates the total number of PEPs that are deployed on the node.ro
Gauge32 UNITS "PEPs"
.1.3.6.1.4.1.9.9.646.1.1.7
caonPepTableThis table lists descriptive and status information about the PEPs contained by this AON node.
SEQUENCE OF CaonPepEntry
.1.3.6.1.4.1.9.9.646.1.1.8
caonPepEntryThe entry in caonPepTable containing information about a single PEP. When AON data plane bootstraps, an entry is created for each PEP that has been deployed on the AON node. When PEPs are deployed from AMC to AON node after AON data plane bootstraps, an entry for each PEP is added to the table. An entry is deleted from the table when the PEP is deleted from AMC.
CaonPepEntry
.1.3.6.1.4.1.9.9.646.1.1.8.1
caonPepIndexThis object indicates an arbitary integer value that uniquely identifies a PEP.
Unsigned32 (1..4294967295 )
.1.3.6.1.4.1.9.9.646.1.1.8.1.1
caonPepNameThis object indicates the name of the PEP.ro
SnmpAdminString
.1.3.6.1.4.1.9.9.646.1.1.8.1.2
caonPepStyleThis object indicates the PEP interaction style commonly known as the MEP. The possible values are: 'oneWay' : Response is not expected from the receiving end point. AON does not wait for response message in this case. 'requestResponse' : Response is expected from the receiving end point. AON waits for the response from the receiving end point. However, the PEP interaction style can be overridden by the Send Bladelet interaction style. If the user specifies the interaction style to be 'oneWay' in the Send bladelet, it overrides the PEP level interaction style and AON does not wait for a response from the receiving end point.ro
Enumeration
.1.3.6.1.4.1.9.9.646.1.1.8.1.3
caonPepReceivedMessagesThis object indicates the total number of messages that were received and for which this PEP was executed. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of caonCounterDiscontinuityTime object.ro
Counter32
.1.3.6.1.4.1.9.9.646.1.1.8.1.4
caonPepFailuresThis object indicates the number of times the PEP execution failed and PEP was forced to execute the exception path. This count is incremented whether an exception path is present or not. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of caonCounterDiscontinuityTime object.ro
Counter32
.1.3.6.1.4.1.9.9.646.1.1.8.1.5
caonPepSecurityFailuresThis object indicates the number of times authentication and certificate validation failures were encountered during PEP execution. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of caonCounterDiscontinuityTime object.ro
Counter32
.1.3.6.1.4.1.9.9.646.1.1.8.1.6
caonPepEndPointTableThis table lists the end points that the messages were delivered to during PEP execution.
SEQUENCE OF CaonPepEndPointEntry
.1.3.6.1.4.1.9.9.646.1.1.10
caonPepEndPointEntryEach entry contains information about an end point that the messages were delivered to during PEP execution. An entry is added to the table when a message is delivered to the end point for the first time during PEP execution. An entry is deleted from this table if the corresponding PEP is deleted from AMC.
CaonPepEndPointEntry
.1.3.6.1.4.1.9.9.646.1.1.10.1
caonPepEndPointIndexThis object indicates an arbitary integer-value that uniquely identifies the PEP end point.
Unsigned32 (1..4294967295 )
.1.3.6.1.4.1.9.9.646.1.1.10.1.1
caonPepEndPointUrlThis object indicates the URL of the end point. This URL does not include the query parameters.ro
CiscoURLString (CISCO-TC)
.1.3.6.1.4.1.9.9.646.1.1.10.1.2
caonEndPointAttemptedMessagesThis object indicates the number of message delivery attempts to the end point. For example, if a message was delivered successfully on the initial try this counter will be incremented by 1; however, if that message was not successfully delivered on the initial try and 3 retry attempts were made, then the counter will be incremented by 4. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of caonCounterDiscontinuityTime object.ro
Counter32
.1.3.6.1.4.1.9.9.646.1.1.10.1.3
caonOneWayDeliveredMessagesThis object indicates the number of one-way messages successfully delivered to the end point. This count includes only those messages that do not require a response from the end point. However in case the AON node is not the exit node but rather an entry or intermediate node hop in the AON cloud then this counter represents successful delivery to the next hop. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of caonCounterDiscontinuityTime object.ro
Counter32
.1.3.6.1.4.1.9.9.646.1.1.10.1.4
caonOneWayFailedMessagesThis object indicates the number of one-way messages that failed delivery to the end point. This count includes only those messages that do not require a response from the end point. However in case the AON node is not the exit node but rather an entry or intermediate node hop in the AON cloud then this counter represents failed delivery to the next hop. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of caonCounterDiscontinuityTime object.ro
Counter32
.1.3.6.1.4.1.9.9.646.1.1.10.1.5
caonReqResponseDeliveredMessagesThis object indicates the number of response required messages successfully delivered to the end point. The count includes only those messages for which a response was received successfully from the end point. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of caonCounterDiscontinuityTime object.ro
Counter32 UNITS "messages"
.1.3.6.1.4.1.9.9.646.1.1.10.1.6
caonReqResponseFailedMessagesThis object indicates the number of response required messages that failed delivery to the end point. This count includes only those messages for which a response message was expected from the end point. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of caonCounterDiscontinuityTime object.ro
Counter32 UNITS "messages"
.1.3.6.1.4.1.9.9.646.1.1.10.1.7
caonEndPointMinResponseTimeThis object indicates the minimum response time experienced by the PEP to receive a response from the end point.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.9.9.646.1.1.10.1.8
caonEndPointMaxResponseTimeThis object indicates the maximum response time experienced by the PEP to receive a response from the end point.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.9.9.646.1.1.10.1.9
caonEndPointAvgResponseTimeThis object indicates the average response time experienced by the PEP to receive a response from the end point.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.9.9.646.1.1.10.1.10
caonCounterDiscontinuityTimeThe value of sysUpTime at the most recent occasion at which one or more of the counters suffered a discontinuity. The relevant counters are the specific instances associated with any Counter32 or Counter64 object in the MIB. If no such discontinuities have occured since the last initialization of the local management subsystem, then this object contains a zero value.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.9.9.646.1.1.11
caonNotificationInfo
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.646.1.2
caonMessageSrcUriThis object indicates the message source URI.ro
SnmpAdminString
.1.3.6.1.4.1.9.9.646.1.2.1
caonMessageSrcIpAddressTypeThis object indicates the type of IP address of the message source.ro
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.9.9.646.1.2.2
caonMessageSrcIpAddressThis object indicates the message source IP Address. The type of this address is determined by the value of caonMessageSrcIpAddressType.ro
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.9.9.646.1.2.3
caonMessageSrcPortThis object indicates the message source port number.ro
CiscoPort (CISCO-TC)
.1.3.6.1.4.1.9.9.646.1.2.4
caonNotificationNameThis object indicates the name of the custom notification type. This notification type is defined by the customer to identify the custom notification.ro
SnmpAdminString
.1.3.6.1.4.1.9.9.646.1.2.5
caonNotificationTextThis object indicates additional information regarding the custom notification. This notification text is defined by the customer to provide details related to the custom notification.ro
SnmpAdminString
.1.3.6.1.4.1.9.9.646.1.2.6
caonSendResponseThresholdThis object indicates the end point response time threshold that is configured in the Send bladelet. If the time to receive a response from the end point exceeds this threshold, then a caonSendResponseThresholdExceeded notification may be generated.ro
TimeTicks (SNMPv2-SMI)
.1.3.6.1.4.1.9.9.646.1.2.7
caonNotifEnableIndicatorsThis object specifies whether the SNMP notifications will or will not be sent. If the 'caonUpNotifEnabled' bit is set, then caonUp notification will be sent when AON data plane bootstraps successfully. If the 'caonUpNotifEnabled' bit is not set, caonUp notification will not be sent. If the 'caonDownNotifEnabled' bit is set, then caonDown notification will be sent when the AON data plane goes down. If the 'caonDownNotifEnabled' bit is not set, caonDown notification will not be sent. If the 'caonNewPepDeployedNotifEnabled' bit is set, then caonNewPepDeployed notification will be sent when a new PEP is deployed successfully after AON bootstrap. If the 'caonNewPepDeployedNotifEnabled' bit is not set, caonNewPepDeployed notification will not be sent. If the 'caonMessageDeliveryFailedNotifEnabled' bit is set, then caonMessageDeliveryFailed notification will be sent when a message cannot be delivered to the end point. If the 'caonMessageDeliveryFailedNotifEnabled' bit is not set, caonMessageDeliveredFailed notification will not be sent. If the 'caonSendResponseThresholdExceededNotifEnabled' bit is set, then caonSendResponseThresholdExceeded notification will be sent when the end point response time exceeds the threshold value specified in Send Bladelet. If the bit 'caonSendResponseThresholdExceededNotifEnabled' is not set, caonSendResponseThresholdExceeded notification will not be sent. If the 'caonCustomNotifEnabled' bit is set, caonCustomNotification will be sent. If the 'caonCustomNotifEnabled' bit is not set, caonCustomNotification will not be sent.rw
Bits
.1.3.6.1.4.1.9.9.646.1.2.8
ciscoAonStatusMIBConform
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.646.2
ciscoAonStatusMIBCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.646.2.1
ciscoAonStatusMIBGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.9.9.646.2.2
CISCO-AON-STATUS-MIB - SNMP MIB Reference | MIBs Explorer