Home/Catalog/CIENA-CES-DATAPLANE-MIB

CIENA-CES-DATAPLANE-MIB

AI MIB Summary

The CIENA-CES-DATAPLANE-MIB provides SNMP-based monitoring and management of the data plane interfaces, traffic statistics, and operational status for the Ciena CN5410 Carrier Ethernet Service platform. It enables administrators to track real-time packet throughput, error counters, and interface states to ensure the integrity of Carrier Ethernet services.

This MIB module is the Dataplane Management for CN5410.
Main OID:
cienaCesDataplaneMIB.1.3.6.1.4.1.1271.2.1.7
355
Objects
Active
Status
6
Dependencies

Imported Objects

SNMPv2-SMI
SNMPv2-TC
CIENA-GLOBAL-MIB
CIENA-TC
CIENA-SMI
CIENA-CES-PORT-MIB

Objects

355 total
Object Name
cienaCesDataplaneMIBThis MIB module is the Dataplane Management for CN5410.
MODULE-IDENTITY
.1.3.6.1.4.1.1271.2.1.7
cienaCesDpMIBObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1
cienaCesDpTsMeterFloodContainerNotifAttrs
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.1
cienaCesDpTsMeterFloodContainerProfileTableTable of flood containment configuration profiles.
SEQUENCE OF CienaCesDpTsMeterFloodContainerProfileEntry
.1.3.6.1.4.1.1271.2.1.7.1.1.1
cienaCesDpTsMeterFloodContainerProfileEntryFlood containment entry in the flood container profile table. Flood traffic is caused when the ingress frame is one of the three types - unknown unicast frame, broadcast frame or unknown multicast frame.Using the flood containment feature the flood causing ingress traffic can be contained to configured rates. Flood causing traffic is traffic that ingresses a virtual switch and egresses multiple logical interfaces attached to the virtual switch (but not the logical interface that the traffic ingresses on).
CienaCesDpTsMeterFloodContainerProfileEntry
.1.3.6.1.4.1.1271.2.1.7.1.1.1.1
cienaCesDpTsMeterFloodContainerProfileIndexThis object is a unique index into the table.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.1.1.1.1
cienaCesDpTsMeterFloodContainerProfileNameThis object specifies a unique profile name for the meter flood container.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.1.1.1.2
cienaCesDpTsMeterFloodContainerNotifProfileIndexThis object specifies a unique index into the table used in the trap definition.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.1.1.1.3
cienaCesDpTsMeterFloodContainerProfileRate1This object specifies the rate limit for 'Containment Rate 1'.ro
Unsigned32 UNITS "kilobits/sec"
.1.3.6.1.4.1.1271.2.1.7.1.1.1.1.4
cienaCesDpTsMeterFloodContainerProfileRate2This object specifies the rate limit for 'Containment Rate 2'.ro
Unsigned32 UNITS "kilobits/sec"
.1.3.6.1.4.1.1271.2.1.7.1.1.1.1.5
cienaCesDpTsMeterFloodContainerProfileRate3This object specifies the rate limit for 'Containment Rate 3'.ro
Unsigned32 UNITS "kilobits/sec"
.1.3.6.1.4.1.1271.2.1.7.1.1.1.1.6
cienaCesDpTsMeterFloodContainerProfileUnknownUnicastRateIdThis object specifies the RateId to use for the unknown unicast traffic. Traffic is allowed untouched upto this RateId (Rate1, Rate2 or Rate3) and dropped when exceeded.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.1.1.1.7
cienaCesDpTsMeterFloodContainerProfileL2BroadcastRateIdThis object specifies the RateId to use for the L2 broadcast traffic.Traffic is allowed untouched upto this RateId (Rate1, Rate2 or Rate3) and dropped when exceeded.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.1.1.1.8
cienaCesDpTsMeterFloodContainerProfileL2UnknownMulticastRateIdThis object specifies the RateId to use for the unknown L2 multicast traffic. Traffic is allowed untouched upto this RateId (Rate1, Rate2 or Rate3) and dropped when exceeded.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.1.1.1.9
cienaCesDpTsMeterFloodContainerAttachmentTableTable of flood container attachments.
SEQUENCE OF CienaCesDpTsMeterFloodContainerAttachmentEntry
.1.3.6.1.4.1.1271.2.1.7.1.1.2
cienaCesDpTsMeterFloodContainerAttachmentEntryFlood containment entry in the flood container attachment table. This object is populated as soon as the flood container profile is attached to a logical interface.
CienaCesDpTsMeterFloodContainerAttachmentEntry
.1.3.6.1.4.1.1271.2.1.7.1.1.2.1
cienaCesDpTsMeterFloodContainerAttachmentLiTypeThis object specifies the logical interface type with which this flood container is associated.
DpTsAttachType
.1.3.6.1.4.1.1271.2.1.7.1.1.2.1.1
cienaCesDpTsMeterFloodContainerAttachmentLiIndexThis object specifies the index of the logical interface with which this flood container is associated. The type of the interface is identified by the object cienaCesDpTsMeterFloodContainerAttachmentLiType.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.1.2.1.2
cienaCesDpTsMeterFloodContainerAttachmentInterfaceNameThis object specifies the name of the logical interface with which this flood container is associated. The type of the interface is identified by the object cienaCesDpTsMeterFloodContainerAttachmentLiType.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.1.2.1.3
cienaCesDpTsMeterFloodContainerNotifAttachmentLiTypeThis object specifies the logical interface type with which this flood container is associated. This object is used in the trap definitions.ro
DpTsAttachType
.1.3.6.1.4.1.1271.2.1.7.1.1.2.1.4
cienaCesDpTsMeterFloodContainerNotifAttachmentLiIndexThis object specifies the index of the logical interface with which this flood container is associated. The type of the interface is identified by the object cienaCesDpTsMeterFloodContainerNotifAttachmentLiType. This object is used in the trap definitions.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.1.2.1.5
cienaCesDpTsMeterFloodContainerAttachmentUcastRateStateThis object specifies the current containment state of the unknown unicast traffic for this flood container instance.ro
CienaGlobalState (CIENA-TC)
.1.3.6.1.4.1.1271.2.1.7.1.1.2.1.6
cienaCesDpTsMeterFloodContainerAttachmentL2BcastRateStateThis object specifies the current containment state of the layer 2 broadcast traffic for this flood container instance.ro
CienaGlobalState (CIENA-TC)
.1.3.6.1.4.1.1271.2.1.7.1.1.2.1.7
cienaCesDpTsMeterFloodContainerAttachmentL2McastRateStateThis object specifies the current containment state of the unknown layer 2 multicast traffic for this flood container instance.ro
CienaGlobalState (CIENA-TC)
.1.3.6.1.4.1.1271.2.1.7.1.1.2.1.8
cienaCesDpTsMeterFloodContainerAttachmentTotalBandwidthThis object specifies the total bandwidth allocated for this flood container instance.ro
Unsigned32
.1.3.6.1.4.1.1271.2.1.7.1.1.2.1.9
cienaCesDpTsMeterFloodContainerAttachmentUsedBandwidthThis object specifies the total bandwidth in use by the child objects of the logical interface associated with this flood container.ro
Unsigned32
.1.3.6.1.4.1.1271.2.1.7.1.1.2.1.10
cienaCesDpTsMeterFloodContainerAttachmentTotalRateStateThis object specifies the current containment state of all received traffic for this flood container instance.ro
CienaGlobalState (CIENA-TC)
.1.3.6.1.4.1.1271.2.1.7.1.1.2.1.11
cienaCesDpTsMeter
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.2
cienaCesDpTsMeterProfile
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.2.1
cienaCesDpTsMeterProfileTableTable of meter profiles.
SEQUENCE OF CienaCesDpTsMeterProfileEntry
.1.3.6.1.4.1.1271.2.1.7.1.2.1.1
cienaCesDpTsMeterProfileEntryMeter Profile entry in the meter profile table. Metering is implemented using a dual leaky bucket mechanism. Conceptually, this can be viewed as a green token bucket which can hold a maximum of CBS tokens and a yellow token bucket which can hold a maximum of EBS tokens. The CIR determines the rate at which the green token bucket is refilled and the EIR determines the rate at which the yellow token bucket is refilled (regardless of CBS and EBS).
CienaCesDpTsMeterProfileEntry
.1.3.6.1.4.1.1271.2.1.7.1.2.1.1.1
cienaCesDpTsMeterProfileIndexThis object specifies a unique index into the table.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.2.1.1.1.1
cienaCesDpTsMeterProfileNameThis object specifies a unique name for the meter profile.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.2.1.1.1.2
cienaCesDpTsMeterProfileCIRThis object specifies the Committed Information Rate (CIR), which is the average rate in kbps for which ingressing traffic is considered green. If the traffic flow rate is at or below the CIR, the system allows the traffic without any change.ro
Unsigned32 UNITS "kilobits/sec"
.1.3.6.1.4.1.1271.2.1.7.1.2.1.1.1.3
cienaCesDpTsMeterProfileCBSThis object specifies the Committed Burst Size (CBS), which is the maximum number of kbytes that can ingress at the maximum interface speed in order to remain CIR conformant.ro
Unsigned32 UNITS "kilobytes"
.1.3.6.1.4.1.1271.2.1.7.1.2.1.1.1.4
cienaCesDpTsMeterProfileEIRThis object specifies the Excess Information Rate (EIR), which is the average rate in kbps, above CIR, for which ingressing traffic is considered yellow and is allowed.ro
Unsigned32 UNITS "kilobits/sec"
.1.3.6.1.4.1.1271.2.1.7.1.2.1.1.1.5
cienaCesDpTsMeterProfileEBSThis object specifies the Excess Burst Size(EBS), which is the maximum number of kbytes that can ingress at the maximum interface speed in order to remain EIR-conformant.ro
Unsigned32 UNITS "kilobytes"
.1.3.6.1.4.1.1271.2.1.7.1.2.1.1.1.6
cienaCesDpTsMeterProfileColorModeType of color modero
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.2.1.1.1.7
cienaCesDpTsMeterProfileCouplingFlagThis object specifies whether or not overflow tokens not used for ingressing traffic declared Green can be used as Yellow tokens.ro
DpCouplingFlag
.1.3.6.1.4.1.1271.2.1.7.1.2.1.1.1.8
cienaCesDpTsMeterProfileAttachmentTableTable of meter profile attachments.
SEQUENCE OF CienaCesDpTsMeterProfileAttachmentEntry
.1.3.6.1.4.1.1271.2.1.7.1.2.1.2
cienaCesDpTsMeterProfileAttachmentEntryMeter profile entry in the meter profile attachment table. this object gets populated as soon as the metering profile is attached to a logical interface.
CienaCesDpTsMeterProfileAttachmentEntry
.1.3.6.1.4.1.1271.2.1.7.1.2.1.2.1
cienaCesDpTsMeterProfileAttachmentLiTypeThis object specifies the local interface type which is a unique index into the table.
DpTsAttachType
.1.3.6.1.4.1.1271.2.1.7.1.2.1.2.1.1
cienaCesDpTsMeterProfileAttachmentLiIndexThis object specifies the logical interface index, which is a unique index into the table.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.2.1.2.1.2
cienaCesDpTsMeterProfileAttachmentTotalCIRThis object indicates the Committed Information Rate (CIR) available to child objects of the associated logical interface. CIR is the average rate in kbps for which ingressing traffic is considered green. If the traffic flow rate is at or below the CIR, the system allows the traffic without any change.ro
Unsigned32 UNITS "kilobits/sec"
.1.3.6.1.4.1.1271.2.1.7.1.2.1.2.1.3
cienaCesDpTsMeterProfileAttachmentTotalEIRThis object indicates the Excess Information Rate (EIR) that can be shared among child objects of the associated logical interface. EIR is the average rate in kbps, above CIR, for which ingressing traffic is considered yellow and is allowed.ro
Unsigned32 UNITS "kilobits/sec"
.1.3.6.1.4.1.1271.2.1.7.1.2.1.2.1.4
cienaCesDpTsMeterProfileAttachmentUsedCIRThis object indicates the total Committed Information Rate(CIR) in use by the child objects associated with the logical interface. CIR is the average rate in kbps for which ingressing traffic is considered green. If the traffic flow rate is at or below the CIR, the system allows the traffic without any change.ro
Unsigned32 UNITS "kilobits/sec"
.1.3.6.1.4.1.1271.2.1.7.1.2.1.2.1.5
cienaCesDpTsMeterProfileAttachmentMaxUsedEIRThis object indicates the maximum amount of Excess Information Rate (EIR) in use by child objects associated with the logical interface. EIR is the average rate in kbps, above CIR, for which ingressing traffic is considered yellow and is allowed.ro
Unsigned32 UNITS "kilobits/sec"
.1.3.6.1.4.1.1271.2.1.7.1.2.1.2.1.6
cienaCesDpTsCosMap
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.3
cienaCesDpTsCosMapRcos
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.3.1
cienaCesDpTsCosMapRcosProfileTableTable of Resolved CoS profiles.
SEQUENCE OF CienaCesDpTsCosMapRcosProfileEntry
.1.3.6.1.4.1.1271.2.1.7.1.3.1.1
cienaCesDpTsCosMapRcosProfileEntryResolved CoS (RCoS) profile entry in the RCoS profile table. The Resolved CoS policy of a logical interface determines how the RCoS and RCOLOR of a frame are derived. The Resolved Cos Policy is set to either map the RCoS and RCOLOR from the frame or to use a fixed RCoS and RCOLOR.
CienaCesDpTsCosMapRcosProfileEntry
.1.3.6.1.4.1.1271.2.1.7.1.3.1.1.1
cienaCesDpTsCosMapRcosProfileIdThis object specifies a unique index into the table.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.3.1.1.1.1
cienaCesDpTsCosMapRcosProfileNameThis object specifies a unique profile name representing the Resolved CoS profile table entry.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.3.1.1.1.2
cienaCesDpTsCosMapRcosFixedRCoSValueThis object specifies the fixed Resolved CoS value.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.3.1.1.1.3
cienaCesDpTsCosMapRcosFixedRcolourThis object specifies the fixed Resolved CoS color.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.3.1.1.1.4
cienaCesDpTsCosMapRcosCosMapIdThis object specifies the ID of the associated Resolved CoS map table.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.3.1.1.1.5
cienaCesDpTsCosMapRcosCosMapNameThis object specifies the name of the associated Resolved CoS map.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.3.1.1.1.6
cienaCesDpTsCosMapRcosMapTableTable of Resolved CoS maps.
SEQUENCE OF CienaCesDpTsCosMapRcosMapEntry
.1.3.6.1.4.1.1271.2.1.7.1.3.1.2
cienaCesDpTsCosMapRcosMapEntryResolved CoS Map entry in the Resolved CoS map table.
CienaCesDpTsCosMapRcosMapEntry
.1.3.6.1.4.1.1271.2.1.7.1.3.1.2.1
cienaCesDpTsCosMapRcosMapIdThis object specifies a unique RCoS map index into the table.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.3.1.2.1.1
cienaCesDpTsCosMapRcosMapNameThis object specifies a unique RCoS map name.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.3.1.2.1.2
cienaCesDpTsCosMapRcosMapL2RCoSThis object specifies the RCoS <0..63> mapping for a given L2-CoS <0..7> and Dei bit value <0..1>. Octet 1: RCoS for L2-COS 0 with DEI of 0 Octet 2: RCoS for L2-COS 0 with DEI of 1 Octet 3: RCoS for L2-COS 1 with DEI of 0 Octet 4: RCoS for L2-COS 1 with DEI of 1 ... Octet 15: RCoS for L2-COS 7 with DEI of 0 Octet 16: RCoS for L2-COS 7 with DEI of 1ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.3.1.2.1.3
cienaCesDpTsCosMapRcosMapL2RColourThis object specifies the RCOLOR <Green-1/Yellow-2> mapping for a given L2-CoS <0..7> and DEI bit value <0..1>. Octet 1: RCOLOR for L2-COS 0 with DEI of 0 Octet 2: RCOLOR for L2-COS 0 with DEI of 1 Octet 3: RCOLOR for L2-COS 1 with DEI of 0 Octet 4: RCOLOR for L2-COS 1 with DEI of 1 ... Octet 15: RCoS for L2-COS 7 with DEI of 0 Octet 16: RCoS for L2-COS 7 with DEI of 1ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.3.1.2.1.4
cienaCesDpTsCosMapRcosMapL3DscpRCoSThis object specifies the RCoS <0..63> mapping for a given DSCP-CoS <0..63>. Octet 1: RCoS for DSCP-COS 0 Octet 2: RCoS for DSCP-COS 1 ... Octet 63: RCoS for DSCP-COS 63ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.3.1.2.1.5
cienaCesDpTsCosMapRcosMapL3DscpRColourThis object specifies the RCOLOR <Green-1/Yellow-2> mapping for a given DSCP-COS <0..63>. Octet 1: RCOLOR for DSCP-COS 0 Octet 2: RCOLOR for DSCP-COS 1 ... Octet 63: RCOLOR for DSCP-COS 63ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.3.1.2.1.6
cienaCesDpTsCosMapRcosMapExpRCoSThis object specifies the RCoS <0..63> mapping for a given EXP-COS <0..7>. Octet 1: RCoS for EXP-COS 0 Octet 2: RCoS for EXP-COS 1 ... Octet 8: RCoS for EXP-COS 7ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.3.1.2.1.7
cienaCesDpTsCosMapRcosMapExpRColourThis object specifies the RCOLOR <Green-1/Yellow-2> mapping for a given EXP-COS <0..7>. Octet 1: RCOLOR for EXP-COS 0 Octet 2: RCOLOR for EXP-COS 1 ... Octet 8: RCOLOR for EXP-COS 7ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.3.1.2.1.8
cienaCesDpTsCosMapFcos
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.3.2
cienaCesDpTsCosMapFcosMapTableTable of Frame CoS Map.
SEQUENCE OF CienaCesDpTsCosMapFcosMapEntry
.1.3.6.1.4.1.1271.2.1.7.1.3.2.1
cienaCesDpTsCosMapFcosMapEntryFrame CoS Map entry in the Frame CoS Map Table.
CienaCesDpTsCosMapFcosMapEntry
.1.3.6.1.4.1.1271.2.1.7.1.3.2.1.1
cienaCesDpTsCosMapFcosMapIdThis object specifies a unique index into the table FCoS map table.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.3.2.1.1.1
cienaCesDpTsCosMapFcosMapNameThis object specifies a unique map name for the FCoS map.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.3.2.1.1.2
cienaCesDpTsCosMapFcosL2CoSThis object specifies the l2Cos <0..7> mapping for a given RCoS and RCOLOR value. Octet 1: l2Cos for RCoS 0 with RCOLOR of Green Octet 2: l2Cos for RCoS 0 with RCOLOR of Yellow Octet 3: l2Cos for RCoS 1 with RCOLOR of Green Octet 4: l2Cos for RCoS 1 with RCOLOR of Yellow ... Octet 126: l2Cos for RCoS 63 with RCOLOR of Green Octet 127: l2Cos for RCoS 63 with RCOLOR of Yellowro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.3.2.1.1.3
cienaCesDpTsCosMapFcosL2DeiThis object specifies the L2-Dei <0..1> mapping for a given RCoS and RCOLOR value. Octet 1: l2-dei for RCoS 0 with RCOLOR of Green Octet 2: l2-dei for RCoS 0 with RCOLOR of Yellow Octet 3: l2-dei for RCoS 1 with RCOLOR of Green Octet 4: l2-dei for RCoS 1 with RCOLOR of Yellow ... Octet 126: l2-dei for RCoS 63 with RCOLOR of Green Octet 127: l2-dei for RCoS 63 with RCOLOR of Yellowro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.3.2.1.1.4
cienaCesDpTsCosMapFcosL3DscpThis object specifies the L3-DSCP <0..63> mapping for a given RCoS and RCOLOR value. Octet 1: l3-dscp for RCoS 0 with RCOLOR of Green Octet 2: l3-dscp for RCoS 0 with RCOLOR of Yellow Octet 3: l3-dscp for RCoS 1 with RCOLOR of Green Octet 4: l3-dscp for RCoS 1 with RCOLOR of Yellow ... Octet 126: l3-dscp for RCoS 63 with RCOLOR of Green Octet 127: l3-dscp for RCoS 63 with RCOLOR of Yellowro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.3.2.1.1.5
cienaCesDpTsCosMapFcosExpThis object specifies the exp <0..7> mapping for a given RCoS and RCOLOR value. Octet 1: exp for RCoS 0 with RCOLOR of Green Octet 2: exp for RCoS 0 with RCOLOR of Yellow Octet 3: exp for RCoS 1 with RCOLOR of Green Octet 4: exp for RCoS 1 with RCOLOR of Yellow ... Octet 126: exp for RCoS 63 with RCOLOR of Green Octet 127: exp for RCoS 63 with RCOLOR of Yellowro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.3.2.1.1.6
cienaCesDpTsShaper
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.4
cienaCesDpTsShaperProfile
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.4.1
cienaCesDpTsShaperProfileTableTable of Shaper Profiles.
SEQUENCE OF CienaCesDpTsShaperProfileEntry
.1.3.6.1.4.1.1271.2.1.7.1.4.1.1
cienaCesDpTsShaperProfileEntryShaper Profile entry in the Shaper Profile Table.
CienaCesDpTsShaperProfileEntry
.1.3.6.1.4.1.1271.2.1.7.1.4.1.1.1
cienaCesDpTsShaperProfileIndexThis object specifies a unique index into the shaper profile table.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.4.1.1.1.1
cienaCesDpTsShaperProfileNameThis object specifies a unique name for the shaper profile.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.4.1.1.1.2
cienaCesDpTsShaperProfileCIRThis object specifies the Committed Information Rate (CIR) in kbps for which egressing traffic is considered green.ro
Unsigned32 UNITS "kilobits/sec"
.1.3.6.1.4.1.1271.2.1.7.1.4.1.1.1.3
cienaCesDpTsShaperProfileCBSThis object specifies the Committed Burst Size (CBS) which is the maximum number of kbytes that can egress at the maximum interface speed in order to remain CIR conformant.ro
Unsigned32 UNITS "kilobytes"
.1.3.6.1.4.1.1271.2.1.7.1.4.1.1.1.4
cienaCesDpTsShaperProfileAttachmentTableTable of shaper profile attachments.
SEQUENCE OF CienaCesDpTsShaperProfileAttachmentEntry
.1.3.6.1.4.1.1271.2.1.7.1.4.1.2
cienaCesDpTsShaperProfileAttachmentEntryMeter profile entry in the shaper profile attachment table.
CienaCesDpTsShaperProfileAttachmentEntry
.1.3.6.1.4.1.1271.2.1.7.1.4.1.2.1
cienaCesDpTsShaperProfileAttachmentLiTypeThis object specifies a unique index into the table.
DpTsAttachType
.1.3.6.1.4.1.1271.2.1.7.1.4.1.2.1.1
cienaCesDpTsShaperProfileAttachmentLiIndexThis object specifies a unique index into the table.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.4.1.2.1.2
cienaCesDpTsShaperProfileAttachmentTotalCIRThis object indicates the Committed Information Rate (CIR) available to child objects associated with the logical interface. CIR is the average rate in kbps for which ingressing traffic is considered green. If the traffic flow rate is at or below the CIR, the system allows the traffic without any change.ro
Unsigned32 UNITS "kilobits/sec"
.1.3.6.1.4.1.1271.2.1.7.1.4.1.2.1.3
cienaCesDpTsShaperProfileAttachmentTotalEIRThis object indicates the total Excess Information Rate (EIR) that can be shared among child objects associated with the logical interface. EIR is the average rate in kbps, above CIR, for which ingressing traffic is considered yellow and is allowed.ro
Unsigned32 UNITS "kilobits/sec"
.1.3.6.1.4.1.1271.2.1.7.1.4.1.2.1.4
cienaCesDpTsShaperProfileAttachmentUsedCIRThis object indicates the used Committed Information Rate (CIR) in use by child objects associated with the logical interface.ro
Unsigned32 UNITS "kilobits/sec"
.1.3.6.1.4.1.1271.2.1.7.1.4.1.2.1.5
cienaCesDpTsShaperProfileAttachmentMaxUsedEIRThis object indicates the maximum used Excess Information Rate (EIR) in use by child objects associated with the logical interface. EIR is the average rate in kbps, above CIR, for which ingressing traffic is considered yellow and is allowed.ro
Unsigned32 UNITS "kilobits/sec"
.1.3.6.1.4.1.1271.2.1.7.1.4.1.2.1.6
cienaCesDpTsQ
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.5
cienaCesDpTsQCongestionAvoidanceProfile
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.5.1
cienaCesDpTsQCAProfileWREDTableTable of congestion avoidance profile for congestion avoidance type WRED.
SEQUENCE OF CienaCesDpTsQCAProfileWREDEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.1.1
cienaCesDpTsQCAProfileWREDEntryAn entry in the WRED congestion avoidance profile table.
CienaCesDpTsQCAProfileWREDEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.1.1.1
cienaCesDpTsQCAProfileWREDIdThis object specifies a unique index into the table.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.1.1.1.1
cienaCesDpTsQCAProfileWREDNameThis object specifies a unique WRED profile name.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.5.1.1.1.2
cienaCesDpTsQCAProfileWREDDropRateExponentThis object specifies the exponential drop-rate exponent of this WRED curve when the average queue size is between the Upper and Lower threshold.ro
Unsigned32
.1.3.6.1.4.1.1271.2.1.7.1.5.1.1.1.3
cienaCesDpTsQCAProfileWREDMaxQueueSizeMaximum Size of Queue. Its unit is in KBytesro
Integer32
.1.3.6.1.4.1.1271.2.1.7.1.5.1.1.1.4
cienaCesDpTsQCAProfileWREDMinQueueGuaranteeMinimum Guarantee Size of queue. Its unit is in KBytesro
Integer32
.1.3.6.1.4.1.1271.2.1.7.1.5.1.1.1.5
cienaCesDpTsQCAProfileWREDCurveTableTable of congestion avoidance curve profile for congestion avoidance type WRED.
SEQUENCE OF CienaCesDpTsQCAProfileWREDCurveEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.1.2
cienaCesDpTsQCAProfileWREDCurveEntryAn entry in the WRED congestion avoidance curve profile table. Congestion avoidance allows frames to be dropped during congestion before they are enqueued (thus avoiding further congestion). The RCOLOR of a frame as it arrives at the egress enqueuing stage determines which WRED curve of the congestion avoidance profile to use (Green or Yellow). A congestion profile has two configurable WRED curves (Curve-1 and Curve-2). By default Green frames map to Curve-1 and Yellow frames map to Curve-2. If no congestion avoidance profile is referenced by a queue within a queue group, this signifies that no congestion avoidance is in effect (Tail Drop) and frames are enqueued only if there is space in the queue; otherwise they are dropped.
CienaCesDpTsQCAProfileWREDCurveEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.1.2.1
cienaCesDpTsQCAProfileWREDCurveIdThis object specifies a unique WRED curve ID.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.1.2.1.1
cienaCesDpTsQCAProfileWREDCurveLowerThresholdThis object specifies the threshold to begin dropping for this WRED curve. If the average queue size is below this value, frames are enqueued and not dropped due to WRED.ro
Unsigned32
.1.3.6.1.4.1.1271.2.1.7.1.5.1.2.1.2
cienaCesDpTsQCAProfileWREDCurveUpperThresholdThis object specifies the threshold above which all the frames for this WRED curve are dropped. If the average queue size is above this value, frames are dropped and not enqueued due to WRED.ro
Unsigned32
.1.3.6.1.4.1.1271.2.1.7.1.5.1.2.1.3
cienaCesDpTsQCAProfileWREDCurveMaxDropProbabilityThis object specifies the drop probability when average queue size reaches the upper threshold value.ro
Unsigned32
.1.3.6.1.4.1.1271.2.1.7.1.5.1.2.1.4
cienaCesDpTsQRCOSQMap
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.5.2
cienaCesDpTsQRCOSQMapTableTable representing RCoS to queue map.
SEQUENCE OF CienaCesDpTsQRCOSQMapEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.2.1
cienaCesDpTsQRCOSQMapEntryAn entry in the RCoS to queue map table.
CienaCesDpTsQRCOSQMapEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.2.1.1
cienaCesDpTsQRCOSQMapIdThis object specifies an unique ID in the RCoS to queue map table.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.2.1.1.1
cienaCesDpTsQRCOSQMapNameThis object specifies the name of the RCoS to queue map.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.5.2.1.1.2
cienaCesDpTsQRCOSQMapQueueTableTable representing RCoS to queue map.
SEQUENCE OF CienaCesDpTsQRCOSQMapQueueEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.2.2
cienaCesDpTsQRCOSQMapQueueEntryAn entry in the RCoS to queue map table. Frames ingressing the device will be assigned an RCoS and RCOLOR by the Resolved CoS mapping stage. The RCoS is used at the egress enqueuing stage to determine which queue in the default port queue group the frame should be enqueued to. This is known as RCoS to Queue Mapping.
CienaCesDpTsQRCOSQMapQueueEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.2.2.1
cienaCesDpTsQRCOSQMapQueueIdThis object specifies a unique index in the RCoS to queue map table.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.2.2.1.1
cienaCesDpTsQRCOSQMapQueueNumberThis object specifies the queue number to which the queue ID of RCoS maps.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.5.2.2.1.2
cienaCesDpTsQRCOSQMapGreenCurveTableTable representing RCoS to queue map green curve map.
SEQUENCE OF CienaCesDpTsQRCOSQMapGreenCurveEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.2.3
cienaCesDpTsQRCOSQMapGreenCurveEntryAn entry in the RCoS to queue green curve map table. The RCOLOR for an RCoS value is mapped to a WRED curve. The WRED-curve is the WRED-curve in the Congestion Avoidance Profile referenced by the Queue that the R-COS maps to. By default, there is an RCoS-To-Queue Map which all Egress Port Queue Groups reference.
CienaCesDpTsQRCOSQMapGreenCurveEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.2.3.1
cienaCesDpTsQRCOSQMapGreenCurveIdThis object indicates the unique index in the table.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.2.3.1.1
cienaCesDpTsQRCOSQMapGreenCurveNumberThe WRED green curve number to which the RCoS Queue green curve ID maps.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.5.2.3.1.2
cienaCesDpTsQRCOSQMapYellowCurveTableTable representing RCoS to queue map yellow curve map.
SEQUENCE OF CienaCesDpTsQRCOSQMapYellowCurveEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.2.4
cienaCesDpTsQRCOSQMapYellowCurveEntryAn entry in the RCoS to queue yellow curve map table. The RCOLOR for an RCoS value is mapped to a WRED curve. The WRED curve is the WRED curve in the congestion avoidance profile referenced by the queue to which the RCoS maps. By default, there is an RCoS-To-Queue Map which all egress port queue groups reference.
CienaCesDpTsQRCOSQMapYellowCurveEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.2.4.1
cienaCesDpTsQRCOSQMapYellowCurveIdUnique index in the table.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.2.4.1.1
cienaCesDpTsQRCOSQMapYellowCurveNumberThe WRED yellow curve number to which the RCoS Queue yellow curve ID maps.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.5.2.4.1.2
cienaCesDpTsQGroupProfile
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.5.3
cienaCesDpTsQGroupProfileTableTable of queue group profiles.
SEQUENCE OF CienaCesDpTsQGroupProfileEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.3.1
cienaCesDpTsQGroupProfileEntryEach entry represents a queue group profile.
CienaCesDpTsQGroupProfileEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.3.1.1
cienaCesDpTsQGroupProfileIdA unique index in the queue group profile table.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.3.1.1.1
cienaCesDpTsQGroupProfileNameThis object indicates the queue group profile name.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.5.3.1.1.2
cienaCesDpTsQGroupProfileQueueCountThis object indicates the number of queues per queue group. Maximum number of queues per queue group is 8.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.3.1.1.3
cienaCesDpTsQGroupProfileRCOSQMapIdThis object specifies the RCoS to Queue Map ID for this group. A queue group profile will reference a queue map profile to obtain the mapping of frames to a queue within the egress port queuing instance. For the 5410 platform this mapping is based on R-COS to Queue mapping.ro
Unsigned32
.1.3.6.1.4.1.1271.2.1.7.1.5.3.1.1.4
cienaCesDpTsQGroupProfileShaperCompensationThis object specifies the Shaper Compensation for all queues of this group. A queue group profile will have shaper compensation set dependent on the expected mix of traffic type being enqueuedro
Integer32
.1.3.6.1.4.1.1271.2.1.7.1.5.3.1.1.5
cienaCesDpTsQGroupProfileQueueTableTable of queues for every queue group profile.
SEQUENCE OF CienaCesDpTsQGroupProfileQueueEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.3.2
cienaCesDpTsQGroupProfileQueueEntryEach entry represents an individual queue belonging to a queue group. The number of entries per group is decided by the cienaCesDpTsQGroupProfileQueueCount object. An Egress Port Queue Group is instantiated for every port when the port is created. The egress port queue group defines the set of queues that are instanced on a port, and the individual CIR/EIR shaping rates for each queue. There is one egress port queue group per port (identified by cienaCesDpTsQGroupProfileId).
CienaCesDpTsQGroupProfileQueueEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.3.2.1
cienaCesDpTsQGroupProfileQueueIndexThis object indicates a unique index for every queue in the queue group.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.3.2.1.1
cienaCesDpTsQGroupProfileQueueCAPIdThis object indicates the Congestion Avoidance Profile (CAP)ID associated with the queue. If a queue does not reference a CAP, no congestion avoidance occurs for the queue and frames will no longer enqueue when the queue is full.ro
Unsigned32
.1.3.6.1.4.1.1271.2.1.7.1.5.3.2.1.2
cienaCesDpTsQGroupProfileQueueCIRThis object indicates the Commmitted Information Rate (CIR) value for the queue. CIR is the average rate in kbps for which ingressing traffic is considered green. If the traffic flow rate is at or below the CIR, the system allows the traffic without any change.ro
Unsigned32 UNITS "kilobits/sec"
.1.3.6.1.4.1.1271.2.1.7.1.5.3.2.1.3
cienaCesDpTsQGroupProfileQueueCBSThis object indicates the Committed Burst Size (CBS)in kbytes for the queue. CBS is the maximum number of kbytes that can ingress at the maximum interface speed in order to remain CIR conformant.ro
Unsigned32 UNITS "kilobytes"
.1.3.6.1.4.1.1271.2.1.7.1.5.3.2.1.4
cienaCesDpTsQGroupProfileQueueEIRThis object indicates the Excess Information Rate (EIR) value for the queue. EIR is the average rate in kbps, above CIR, for which ingressing traffic is considered yellow and is allowed.ro
Unsigned32 UNITS "kilobits/sec"
.1.3.6.1.4.1.1271.2.1.7.1.5.3.2.1.5
cienaCesDpTsQGroupProfileQueueEBSThis object indicates the Excess Burst Size (EBS) in kbytes for the queue. EBS is the maximum number of kbytes that can ingress at the maximum interface speed in order to remain EIR conformant.ro
Unsigned32 UNITS "kilobytes"
.1.3.6.1.4.1.1271.2.1.7.1.5.3.2.1.6
cienaCesDpTsQGroupProfileQueueCirPercentThis object specifies the cir-percent associated with the queue. The cir-percent allows for the CIR value to be determined as a percentage of the parent scheduler CIR.ro
Unsigned32 UNITS "percent"
.1.3.6.1.4.1.1271.2.1.7.1.5.3.2.1.7
cienaCesDpTsQGroupProfileQueueEirPercentThis object specifies the eir-percent associated with the queue. The eir-percent allows for the EIR value to be determined as a percentage of the parent scheduler EIR.ro
Unsigned32 UNITS "percent"
.1.3.6.1.4.1.1271.2.1.7.1.5.3.2.1.8
cienaCesDpTsQGroupInstance
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.5.4
cienaCesDpTsQGroupInstanceTableTable of group instances.
SEQUENCE OF CienaCesDpTsQGroupInstanceEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.4.1
cienaCesDpTsQGroupInstanceEntryEach entry represents a group instance.
CienaCesDpTsQGroupInstanceEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.4.1.1
cienaCesDpTsQGroupInstancePgidThis object specifies the PGID of the port to which the queue group resolves.
Unsigned32
.1.3.6.1.4.1.1271.2.1.7.1.5.4.1.1.1
cienaCesDpTsQGroupInstanceIndexThis object specifies the queue group profile instance ID.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.4.1.1.2
cienaCesDpTsQGroupInstanceParentSchedIdThis object specifies the profile ID of the parent scheduler to which this queue group instance is attached.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.4.1.1.3
cienaCesDpTsQGroupInstanceParentInstanceIdThis object specifies the instance ID of the parent scheduler to which this queue group instance is attached.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.4.1.1.4
cienaCesDpTsQSchedulerProfile
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.5.5
cienaCesDpTsQSchedulerProfileTableScheduler profile configuration data.
SEQUENCE OF CienaCesDpTsQSchedulerProfileEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.5.1
cienaCesDpTsQSchedulerProfileEntryAn entry in the scheduler profile configuration table.
CienaCesDpTsQSchedulerProfileEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.5.1.1
cienaCesDpTsQSchedulerProfileIdThis object specifies the unique index for the scheduler profile.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.5.1.1.1
cienaCesDpTsQSchedulerProfileNameThis object specifies the name for the scheduler profile.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.5.5.1.1.2
cienaCesDpTsQSchedulerProfileSchedulerAlgorithmThis object specifies the scheduler algorithm associated with the scheduler profile.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.5.5.1.1.3
cienaCesDpTsQSchedulerProfileCIRThis object indicates the Committed Information Rate (CIR) for the scheduler profile. CIR is the average rate in kbps for which ingressing traffic is considered green. If the traffic flow rate is at or below the CIR, the system will allow the traffic without any change.ro
Unsigned32 UNITS "kilobits/sec"
.1.3.6.1.4.1.1271.2.1.7.1.5.5.1.1.4
cienaCesDpTsQSchedulerProfileCBSThis object indicates the Committed Burst Size (CBS) for the scheduler profile. CBS is the maximum number of kbytes that can ingress at the maximum interface speed in order to remain CIR conformant.ro
Unsigned32 UNITS "kilobytes"
.1.3.6.1.4.1.1271.2.1.7.1.5.5.1.1.5
cienaCesDpTsQSchedulerProfileEIRThis object indicates the Excess Information Rate (EIR) for the scheduler profile. EIR is the average rate in kbps, above CIR, for which ingressing traffic is considered yellow and is allowed.ro
Unsigned32 UNITS "kilobits/sec"
.1.3.6.1.4.1.1271.2.1.7.1.5.5.1.1.6
cienaCesDpTsQSchedulerProfileEBSThis object indicates the Excess Burst Size (EBS) for the scheduler profile. EBS is the maximum number of kbytes that can ingress at the maximum interface speed in order to remain EIR conformant.ro
Unsigned32 UNITS "kilobytes"
.1.3.6.1.4.1.1271.2.1.7.1.5.5.1.1.7
cienaCesDpTsQSchedulerProfileScheduledUcastWtScheduled-unicast weight is applicable for the port root scheduler only, and which defines the weight given at the egress port to scheduled-unicast traffic.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.5.1.1.8
cienaCesDpTsQSchedulerProfileScheduledMcastWtScheduled-multicast weight is applicable for the port root scheduler only, and which defines the weight given at the egress port to scheduled-multicast traffic.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.5.1.1.9
cienaCesDpTsQSchedulerProfileTapPointCountThis object specifies the number of tap points for the scheduler.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.5.1.1.10
cienaCesDpTsQSchedulerProfileShaperOverSpeedThis object specifies the shaper overspeed in percentage for the (root) scheduler.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.5.1.1.11
cienaCesDpTsQSchedulerProfileCirPolicyThis object specifies the cir-policy associated with the scheduler profile. A policy of autoAdjustDisabled means that CIR is configured based on the CIR value in Kbps of this scheduler profile. Additionally, the child schedulers/queues will configure their respective CIRs based on the configured CIR values in the respective child schedulers/queues. A policy of cirAsPercent means that CIR is configured based on the CIR-percent of this scheduler profile/instance, where cir-percent is the percentage of the parent CIR. Additionally, the child schedulers/queues will configure their respective CIRs based on the configured CIR percents in the respective child schedulers/queues relative to the CIR configured in this scheduler profile/instance. A policy of childCirAsPercent means that CIR is configured based on the CIR value in Kbps of this scheduler profile/instance. Additionally, the child schedulers/queues will configure their respective CIRs based on the configured CIR percents in the respective child schedulers/queues relative to the CIR configured in this scheduler profile/instance. A policy of childCirSum means that CIR is configured based on the sum of CIR values in the child schedulers/queues relative to this scheduler/instance.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.5.5.1.1.12
cienaCesDpTsQSchedulerProfileEirPolicyThis object specifies the eir-policy associated with the scheduler profile. A policy of autoAdjustDisabled means that EIR is configured based on the EIR value in Kbps of this scheduler profile. Additionally, the child schedulers/queues will configure their respective EIRs based on the configured EIR values in the respective child schedulers/queues. A policy of eirAsPercent means that EIR is configured based on the EIR-percent of this scheduler profile/instance, where eir-percent is the percentage of the parent EIR. Additionally, the child schedulers/queues will configure their respective EIRs based on the configured EIR percents in the respective child schedulers/queues relative to the EIR configured in this scheduler profile/instance. A policy of childEirAsPercent means that EIR is configured based on the EIR value in Kbps of this scheduler profile/instance. Additionally, the child schedulers/queues will configure their respective EIRs based on the configured EIR percents in the respective child schedulers/queues relative to the EIR configured in this scheduler profile/instance.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.5.5.1.1.13
cienaCesDpTsQSchedulerProfileCirPercentThis object specifies the cir-percent associated with the scheduler profile. The cir-percent allows for the CIR value on a scheduler instance to be determined as a percentage of the parent scheduler CIR.ro
Unsigned32 UNITS "percent"
.1.3.6.1.4.1.1271.2.1.7.1.5.5.1.1.14
cienaCesDpTsQSchedulerProfileEirPercentThis object specifies the eir-percent associated with the scheduler profile. The eir-percent allows for the EIR value on a scheduler instance to be determined as a percentage of the parent scheduler EIR.ro
Unsigned32 UNITS "percent"
.1.3.6.1.4.1.1271.2.1.7.1.5.5.1.1.15
cienaCesDpTsQSchedulerTapPointTableTap point configuration data for a scheduler.
SEQUENCE OF CienaCesDpTsQSchedulerTapPointEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.5.2
cienaCesDpTsQSchedulerTapPointEntryAn entry in the tap point configuration table. A scheduler tap point is the connection point on the scheduler between a queue and the parent scheduler.
CienaCesDpTsQSchedulerTapPointEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.5.2.1
cienaCesDpTsQSchedulerTapPointIndexThis object specifies the unique index for the tap point configuration entry.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.5.2.1.1
cienaCesDpTsQSchedulerTapPointPriorityThis object specifies the priority of a tap point relative to other tap points in the scheduler when the scheduler algorithm is 'Strict Priority'.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.5.2.1.2
cienaCesDpTsQSchedulerTapPointWeightThis object specifies the weight of the tap point in the scheduler when the scheduler algorithm is 'Weighted Fair Queuing'.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.5.2.1.3
cienaCesDpTsQSchedulerInstance
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.5.6
cienaCesDpTsQSchedulerInstanceTableTable of scheduler instances.
SEQUENCE OF CienaCesDpTsQSchedulerInstanceEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.6.1
cienaCesDpTsQSchedulerInstanceEntryEach entry represents a scheduler instance.
CienaCesDpTsQSchedulerInstanceEntry
.1.3.6.1.4.1.1271.2.1.7.1.5.6.1.1
cienaCesDpTsQSchedulerInstancePgidThis object specifies the PGID of the port to which the scheduler resolves.
Unsigned32
.1.3.6.1.4.1.1271.2.1.7.1.5.6.1.1.1
cienaCesDpTsQSchedulerInstanceIndexThis object specifies the scheduler profile instance ID.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.6.1.1.2
cienaCesDpTsQSchedulerInstanceParentSchedIdThis object specifies the profile ID of the parent scheduler to which this scheduler is attached.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.6.1.1.3
cienaCesDpTsQSchedulerInstanceParentInstanceIdThis object specifies the instance ID of the parent scheduler to which this scheduler is attached.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.6.1.1.4
cienaCesDpTsQSchedulerInstanceParentTapPointThis object specifies the tap point of the parent scheduler to which this scheduler is attached.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.5.6.1.1.5
cienaCesDpTsQSchedulerInstanceControlPlaneUsedCirThis object specifies the control-plane-used-cir associated with the scheduler instance. It allows validation of dataplane CIR changes relative to control-plane usagero
Unsigned32 UNITS "kilobits/sec"
.1.3.6.1.4.1.1271.2.1.7.1.5.6.1.1.6
cienaCesDpTrafficClassTerm
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.6
cienaCesDpTrafficClassTermTableTable of Traffic Classes.
SEQUENCE OF CienaCesDpTrafficClassTermEntry
.1.3.6.1.4.1.1271.2.1.7.1.6.1
cienaCesDpTrafficClassTermEntryTraffic Class entry in the Traffic Classes table.
CienaCesDpTrafficClassTermEntry
.1.3.6.1.4.1.1271.2.1.7.1.6.1.1
cienaCesDpTrafficClassTypeThis object specifies the Traffic Class Term Type.
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.6.1.1.1
cienaCesDpTrafficClassIdThis object specifies the traffic class ID to which this Traffic Class Term belongs. A traffic class ID is unique within a traffic class type.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.6.1.1.2
cienaCesDpTrafficClassElemIdThis object specifies the Traffic Class Element ID of the Traffic Class ID to which this Traffic Class Term belongs. A traffic class element ID is unique within a class element ID.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.6.1.1.3
cienaCesDpTrafficClassTermPresentTypeThis object specifies the type of term contained in the term value and mask fields. The traffic classification is explained as below with the associated logical interface. unknown trafficClassElement - Traffic class element vid1 - VLAN ID1 - Sub-Port, Qos-Flow, Access-Flow l2Pcp1 - L2 PCP priority - Sub-Port, Qos-Flow, Access-Flow for VLAN Tag1(VID1) vid2 - VLAN ID2 - Sub-Port, Qos-Flow, Access-Flow l2Pcp2 - L2 PCP priority - Sub-Port, Qos-Flow, Access-Flow for VLAN Tag2(VID2) vlanUntaggedData - VLAN untagged data frames - Sub-Port l2Control - VLAN L2 control frames - Sub-Port cMacSa - Customer source MAC address - Sub-Port, Qos-Flow, Access-Flow (with optional mask) cMacDa - Customer destination MAC - Sub-Port, Qos-Flow, Access-Flow (with optional mask) ipSrcIp - IPv4 source address - Sub-Port, Qos-Flow, Access-Flow (with optional mask) ipDstIp - IPv4 destination address - Sub-Port, Qos-Flow, Access-Flow (with optional mask) ipProtoType - IP generic protocol type - Qos-Flow, Access-Flow (like ICMP,IGMP,TCP,UDP) ipDscp - DSCP field of IP frame - Sub-Port, Qos-Flow, Access-Flow (with optional mask) ipL4SrcPort - Layer-4 UDP/TCP source port - Qos-Flow, Access-Flow ipL4DstPort - Layer-4 UDP/TCP destination - Qos-Flow, Access-Flow port mplsVcLabel - MPLS virtual circuit label - vcMPLS mplsVcExp - MPLS virtual circuit exp - vcMPLS mplsTunLabel - MPLS tunnel label - vcMPLS mplsTunExp - MPLS tunnel exp - vcMPLS baseEtype - Base e-type - Sub-Port, Qos-Flow, Access-Flow bvid - B-VID Tag - PBB-TE bPcp - B-VID PCP - PBB-TE isid - ISID - PBB-TE isidPcp - ISID PCP - PBB-TE (with optional mask) any - Any traffic type - QoS Flow ipL4Application - Layer-4 application - Qos-Flow, Access-Flow
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.6.1.1.4
cienaCesDpTrafficClassTermStartValue32This object specifies the Traffic Class Term start value dependent on cienaCesDpTrafficClassTermPresentType.ro
Unsigned32
.1.3.6.1.4.1.1271.2.1.7.1.6.1.1.5
cienaCesDpTrafficClassTermEndOrMaskValue32This object specifies the Traffic Class Term end or mask value dependent on cienaCesDpTrafficClassTermPresentType.ro
Unsigned32
.1.3.6.1.4.1.1271.2.1.7.1.6.1.1.6
cienaCesDpTrafficClassTermStartValueMacThis object specifies the Traffic Class Term MAC address value dependent on cienaCesDpTrafficClassTermPresentType.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.6.1.1.7
cienaCesDpTrafficClassTermMaskValueMacThis object specifies the Traffic Class Term MAC address Mask value dependent on cienaCesDpTrafficClassTermPresentType.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.6.1.1.8
cienaCesDpTrafficClassTermStartValueIpThis object specifies the Traffic Class Term IP address value dependent on cienaCesDpTrafficClassTermPresentType.ro
IpAddress
.1.3.6.1.4.1.1271.2.1.7.1.6.1.1.9
cienaCesDpTrafficClassTermMaskValueIpThis object specifies the Traffic Class Term IP address mask value dependent on cienaCesDpTrafficClassTermPresentType.ro
IpAddress
.1.3.6.1.4.1.1271.2.1.7.1.6.1.1.10
cienaCesDpSubPort
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.7
cienaCesDpSubPortTableTable of sub-ports.
SEQUENCE OF CienaCesDpSubPortEntry
.1.3.6.1.4.1.1271.2.1.7.1.7.1
cienaCesDpSubPortEntrySub-port entry in the sub-port Table. A sub-port is a logical interface and is always a child object of a logical port.
CienaCesDpSubPortEntry
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1
cienaCesDpSubPortLiIndexThis object represents a unique index into the table.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.1
cienaCesDpSubPortNameThis object represents a unique name of the sub-port.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.2
cienaCesDpSubPortClassifierPrecedenceThis object represents the classifier precedence relative to other sub-ports sharing the same parent interface.ro
Unsigned32
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.3
cienaCesDpSubPortParentIfIdThis object represents the parent port PGID.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.4
cienaCesDpSubPortVirtualSwitchIndexThis object represents the index of the attached virtual switch.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.5
cienaCesDpSubPortRlanIndexThis object represents the index of the RLAN of the attached virtual switch.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.6
cienaCesDpSubPortVirtualSwitchNameThis object represents the name of the attached virtual switch.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.7
cienaCesDpSubPortIngressMeterProfileIdThis object specifies the ID of the attached ingress meter profile.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.8
cienaCesDpSubPortIngressMeterProfileNameThis object specifies the name of the attached ingress meter profile.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.9
cienaCesDpSubportIngressMeterPolicyThis object specifies the ingress meter policy. The ingress meter policy has no effect when there is no meter profile attached to this sub-port. - Non-Hierarchical: Denotes that frames which classify to the Meter instantiated via an attached Meter Profile will be Metered according to the bandwidth parameters of the attached Meter Profile. The resultant color of the frame is determined by the single meter instance of the logical interface. The frame is processed by a single ingress meter. Resultant Red frames will be dropped. - Hierarchical: Denotes that frames which classify to the Meter instantiated via an attached Meter Profile will first be Metered according to the bandwidth parameters of the attached Meter Profile, then subsequently those frames will be Metered according to the bandwidth parameters of the first Parent Logical Interface that has a Meter Profile attached. If no parent logical interface has an attached ingress meter profile, the behavior for frames that classify to the logical interface is the same as the Non-Hierarchical policy. The resultant color of frames which are metered by the attached meter profile are fed into the parent meter. If the resultant color of a frame is Red after being processed by a meter at any hierarchical level, the frame is dropped and not fed into a parent meter.ro
DpIngressMeterPolicy
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.10
cienaCesDpSubPortIngressFloodContainerIdThis object specifies the ID of the attached ingress flood container profile. Flood containment for sub-ports is based on the destination MAC address of the frame.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.11
cienaCesDpSubPortIngressFloodContainerNameThis object specifies the name of the attached ingress flood container profile.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.12
cienaCesDpSubPortIngressRcosProfileIdThis object specifies the ID of the attached ingress resolved CoS profile.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.13
cienaCesDpSubPortIngressRcosProfileNameThis object specifies the name of the attached ingress resolved CoS profile.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.14
cienaCesDpSubPortIngressRcosPolicyThis object specifies the ingress resolved CoS policy.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.15
cienaCesDpSubPortIngressFcosMapIdThis object specifies the ID of the attached ingress frame CoS map.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.16
cienaCesDpSubPortIngressFcosMapNameThis object specifies the name of the attached ingress frame CoS map.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.17
cienaCesDpSubPortEgressFcosMapIdThis object specifies the ID of the egress frame CoS map.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.18
cienaCesDpSubPortEgressFcosMapNameThis object specifies the name of the egress frame CoS map.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.19
cienaCesDpSubPortEgressL2PtTransformThis object specifies whether an L2PT transform is performed on L2PT transform eligible frames at egress.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.20
cienaCesDpSubPortIngressL2TransformThis object specifies sub-port L2 ingress transform policy .ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.21
cienaCesDpSubPortEgressL2TransformThis object specifies sub-port L2 egress transform policy .ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.22
cienaCesDpSubPortIngressL3TransformPolicyThis object specifies sub-port L3 ingress transform policy type.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.23
cienaCesDpSubPortEgressL3TransformPolicyThis object specifies sub-port L3 egress transform policy type.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.24
cienaCesDpSubPortPrivateFwdGroupThis object specified the private forwarding group.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.25
cienaCesDpSubPortFilterPolicyThis object specifies the access filter policy.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.26
cienaCesDpSubPortLogicalRingIndexThis object specifies the logical ring index.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.27
cienaCesDpSubPortVirtualRingIndexThis object specifies the virtual ring index.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.28
cienaCesDpSubPortEgressReflectorMacThis object specifies the MAC address of the egress reflector when enabled.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.29
cienaCesDpSubPortEgressGeneratorMacThis object specifies the generator MAC address of the egress reflector when enabled.ro
MacAddress (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.30
cienaCesDpSubPortQueueGroupProfileIdThis object specifies the Queue-Group-Profile-Id portion of a Queue-Group-Instance tuple. The complete tuple is Queue-Group-Profile-Id + Queue-Group-Instance-Id + parent-interfacero
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.31
cienaCesDpSubPortQueueGroupProfileNameThis object specifies the Queue-Group-Profile-Name for the Queue-Group-Profile-Id portion of a Queue-Group-Instance tuple. The complete tuple is Queue-Group-Profile-Id + Queue-Group-Instance-Id + parent-interfacero
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.32
cienaCesDpSubPortQueueGroupInstanceIdThis object specifies the Queue-Group-Instance-Id portion of a Queue-Group-Instance tuple. The complete tuple is Queue-Group-Profile-Id + Queue-Group-Instance-Id + parent-interfacero
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.7.1.1.33
cienaCesDpVirtualSwitch
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.8
cienaCesDpVirtualSwitchTableTable of Virtual Switches. This table is a place holder for future extension where multiple RLANs are supported in a Virtual Switch. Reading this table returns NULL.
SEQUENCE OF CienaCesDpVirtualSwitchEntry
.1.3.6.1.4.1.1271.2.1.7.1.8.1
cienaCesDpVirtualSwitchEntryVirtual Switch entry in the Virtual Switch Table.
CienaCesDpVirtualSwitchEntry
.1.3.6.1.4.1.1271.2.1.7.1.8.1.1
cienaCesDpVirtualSwitchIndexThis object specifies a unique index into the table.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.8.1.1.1
cienaCesDpVirtualSwitchRlanIndexThis object specifies a unique virtual switch RLAN index to the table. Supporting value of ZERO only at this time.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.8.1.1.2
cienaCesDpVirtualSwitchRlanTableTable of Virtual Switches RLAN.
SEQUENCE OF CienaCesDpVirtualSwitchRlanEntry
.1.3.6.1.4.1.1271.2.1.7.1.8.2
cienaCesDpVirtualSwitchRlanEntryVirtual Switch entry in the Virtual Switch RLAN table.
CienaCesDpVirtualSwitchRlanEntry
.1.3.6.1.4.1.1271.2.1.7.1.8.2.1
cienaCesDpVirtualSwitchRlanNameThis object specifies a unique name of a Virtual Switch + RLAN.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.8.2.1.1
cienaCesDpVirtualSwitchRlanMcastForwardingModeThis object specifies the virtual switch MCAST forwarding mode. -'Default' follows a normal flooding path through the data-plane. In this mode, frames with an L2 DA most-significant-byte equal to 0x01 are treated as all other ucast-flood and broadcast traffic on the virtual switch. -'l2Enhanced' provides increased performance for multicast L2 DAs that have a most-significant-byte equal to 0x01, e.g., 01-??-??-??-??-??ro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.8.2.1.2
cienaCesDpVirtualSwitchRlanL2CftStatusThis object specifies the virtual switch L2 control frame tunneling status. When the L2CFT status is disabled, then the Untagged L2CF(L2 Control Frame) is handled using the ingress port's default disposition, while Transparent and L2PT L2CF forms are handled as normal data frames.ro
CienaGlobalState (CIENA-TC)
.1.3.6.1.4.1.1271.2.1.7.1.8.2.1.3
cienaCesDpVirtualSwitchRlanL2CftL2ControlRcosThis object specifies the RCoS to use for control frames An L2CF that is processed with an L2CFT disposition of forwarding is flooded to all logical-interfaces in the virtual switch/RLAN forwarding-domain, and is subject to the same egress restrictions as normal data frames. A frame that is classified as an Untagged L2CF is forwarded by an L2CFT Instance using the RCoS value specified by this object. The object does not apply to a tagged L2CF frame that is classified as a Transparent or L2PT form of a L2CF. Such frames are given the same internal treatment as data frames that are classified to the same logical-interface.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.8.2.1.4
cienaCesDpVirtualSwitchRlanMacLearningStatusThis object specifies the virtual switch learning mode. Default value of L2 MAC learning is enabled.ro
CienaGlobalState (CIENA-TC)
.1.3.6.1.4.1.1271.2.1.7.1.8.2.1.5
cienaCesDpVirtualSwitchRlanPrivateFwdGroupStatusThis object specifies the virtual switch private forwarding groups status. Default value is disabled. When enabled, group A,B,C policies are enforced. The purpose of Private Forwarding Groups is to provide a set of group-based associations and forwarding rules among interfaces of a virtual switch [and RLAN].ro
CienaGlobalState (CIENA-TC)
.1.3.6.1.4.1.1271.2.1.7.1.8.2.1.6
cienaCesDpVirtualSwitchRlanPrivateFwdGroupAPolicyThis object specifies the policy for private forwarding group A of the virtual switch + RLAN. This policy is active when private forwardd group status is set to enabled.ro
PrivateForwardGroupPolicy
.1.3.6.1.4.1.1271.2.1.7.1.8.2.1.7
cienaCesDpVirtualSwitchRlanPrivateFwdGroupBPolicyThis object specifies the policy for private forwarding group B of the virtual switch + RLAN. This policy is active when private forward group status is set to enabled.ro
PrivateForwardGroupPolicy
.1.3.6.1.4.1.1271.2.1.7.1.8.2.1.8
cienaCesDpVirtualSwitchRlanPrivateFwdGroupCPolicyThis object specifies the policy for private forwarding group C of the virtual switch + RLAN. This policy is active when private forward group status is set to enabled.ro
PrivateForwardGroupPolicy
.1.3.6.1.4.1.1271.2.1.7.1.8.2.1.9
cienaCesDpVirtualSwitchRlanDescriptionThis object specifies a description for the virtual switch.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.8.2.1.10
cienaCesDpVirtualSwitchRlanPfgProfileIdThis object specifies a pfg-profile ID associated with a virtual switch.ro
Integer32
.1.3.6.1.4.1.1271.2.1.7.1.8.2.1.11
cienaCesDpVirtualSwitchRlanPfgProfileNameThis object specifies a pfg-profile Name associated with a virtual switch.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.8.2.1.12
cienaCesDpVirtualSwitchRlanL2CftProfileIdThis object specifies an l2-cft-profile ID associated with a virtual switch.ro
Integer32
.1.3.6.1.4.1.1271.2.1.7.1.8.2.1.13
cienaCesDpVirtualSwitchRlanL2CftProfileNameThis object specifies an l2-cft-profile Name associated with a virtual switch.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.8.2.1.14
cienaCesDpVirtualSwitchRlanLearnLimitThis object specifies learn limit count for the virtual switch.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.8.2.1.15
cienaCesDpVirtualSwitchRlanIfTableTable of virtual switch interfaces.
SEQUENCE OF CienaCesDpVirtualSwitchRlanIfEntry
.1.3.6.1.4.1.1271.2.1.7.1.8.3
cienaCesDpVirtualSwitchRlanIfEntryVirtual Switch Interface entry in the virtual switch interfaces table.
CienaCesDpVirtualSwitchRlanIfEntry
.1.3.6.1.4.1.1271.2.1.7.1.8.3.1
cienaCesDpVirtualSwitchRlanIfLiTypeThis object specifies a unique virtual switch index into the table.
DpTsAttachType
.1.3.6.1.4.1.1271.2.1.7.1.8.3.1.1
cienaCesDpVirtualSwitchRlanIfLiIndexThis object specifies a unique RLAN index into the table.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.8.3.1.2
cienaCesDpVirtualSwitchRlanIfLportIngressThis object specifies the resolved ingress port PGID. A value of 0 means that the ingress port PGID is unknown at this time.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.8.3.1.3
cienaCesDpVirtualSwitchRlanIfLportEgressThis object specifies the resolved egress port PGID. A value of 0 means that the egress port PGID is unknown at this time.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.8.3.1.4
cienaCesDpVirtualSwitchRlanL2CftProtocolTableTable of virtual switch Layer 2 Control Frame Tunneling (L2CFT) protocols.
SEQUENCE OF CienaCesDpVirtualSwitchRlanL2CftProtocolEntry
.1.3.6.1.4.1.1271.2.1.7.1.8.4
cienaCesDpVirtualSwitchRlanL2CftProtocolEntryVirtual switch L2CFT protocol entry in the virtual switch L2CFT protocol table. Each virtual switch or RLAN in the system is implicitly associated with an L2CFT instance, whether or not it has been given an explicit L2CFT configuration. Normally, Layer 2 Control Frames(L2CFs) received on a NPU are either sent to the CPU to be handled or discarded. L2CFT modifies this default behavior, so that the L2CFs for certain protocols can be transformed and forwarded as data frames.
CienaCesDpVirtualSwitchRlanL2CftProtocolEntry
.1.3.6.1.4.1.1271.2.1.7.1.8.4.1
cienaCesDpVirtualSwitchRlanL2CftProtocolTypeThis object specifies a unique protocol type index into the table.
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.8.4.1.1
cienaCesDpVirtualSwitchRlanL2CftProtocolDispositionThis object specifies the virtual switch L2CFT protocol action. There are 2 cases : - When 'cienaCesDpVirtualSwitchRlanL2CftStatus = disabled' or the protocol is not in the Disposition List, then an Untagged L2CF is handled using the ingress logical port's Default Disposition for the protocol, while Transparent and L2PT L2CF forms are handled as normal data frames. - When 'cienaCesDpVirtualSwitchRlanL2CftStatus = enabled' and L2CF protocol is in the Disposition List, the L2CF is either discarded or forwarded depending on the value of this object. An L2CF that is processed with an L2CFT disposition of 'forward' is flooded to all logical-interfaces in the virtual switch/RLAN forwarding-domain, and is subject to the same egress restrictions as normal data frames.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.8.4.1.2
cienaCesDpQosFlow
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.9
cienaCesDpQosFlowTableTable of QoS flows.
SEQUENCE OF CienaCesDpQosFlowEntry
.1.3.6.1.4.1.1271.2.1.7.1.9.1
cienaCesDpQosFlowEntryQoS flow entry in the QoS flow table. QoS flow is a logical interface and is always a child object of another logical interface. A QoS flow is realized primarily in the ingress direction and is not associated with a virtual switch.
CienaCesDpQosFlowEntry
.1.3.6.1.4.1.1271.2.1.7.1.9.1.1
cienaCesDpQosFlowLiIndexThis object specifies a unique index into the table.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.9.1.1.1
cienaCesDpQosFlowNameThis object specifies a unique name of a QoS flow.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.9.1.1.2
cienaCesDpQosFlowClassifierPrecedenceThis object specifies classifier precedence relative to other QoS flows sharing the same parent interface.ro
Unsigned32
.1.3.6.1.4.1.1271.2.1.7.1.9.1.1.3
cienaCesDpQosFlowParentIfIdThis object specifies the parent interface PGID. This object specifies an existing logical interface ID.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.9.1.1.4
cienaCesDpQosFlowParentIfTypeThis object specifies the parent interface type. Currently a QoS flow can be associated with sub-port or PBB-TE service type logical interfaces only.ro
DpTsAttachType
.1.3.6.1.4.1.1271.2.1.7.1.9.1.1.5
cienaCesDpQosFlowIngressMeterProfileIdThis object specifies the ID of the attached ingress meter profile.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.9.1.1.6
cienaCesDpQosFlowIngressMeterProfileNameThis object specifies the name of the attached ingress meter profile.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.9.1.1.7
cienaCesDpQosFlowIngressMeterPolicyThis object specifies the ingress meter policy. The ingress meter policy has no effect when there is no meter profile attached to this QoS flow.. - Non-Hierarchical: Denotes that frames which classify to the Meter instantiated via an attached Meter Profile will be Metered according to the bandwidth parameters of the attached Meter Profile. The resultant colour of the frame will be determined by the single meter instance of the logical interface. The frame is processed by a single ingress meter. Resultant Red frames are dropped. - Hierarchical: Denotes that frames which classify to the Meter instantiated via an attached Meter Profile will first be Metered according to the bandwidth parameters of the attached Meter Profile, then subsequently those frames will be Metered according to the bandwidth parameters of the first parent logical interface (identifie d by the object cienaCesDpQosFlowParentIfType) that has a Meter Profile attached. If no parent logical interface has an attached ingress meter profile, the behavior for frames which classify to the logical interface is the same as the Non-Hierarchical policy. The resultant colour of frames that are metered by the attached meter profile are fed into the parent meter. If the resultant color of a frame is Red after being processed by a meter at any hierarchical level, the frame is dropped and not fed into a parent meter.ro
DpIngressMeterPolicy
.1.3.6.1.4.1.1271.2.1.7.1.9.1.1.8
cienaCesDpQosFlowIngressRcosProfileIdThis object specifies the ID of the attached ingress Resolved CoS profile. When this objects indicates a 0 , then this QoS-flow does not have any RCoS profile attached to it.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.9.1.1.9
cienaCesDpQosFlowIngressRcosProfileNameThis object specifies the name of the attached ingress Resolved CoS profile.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.9.1.1.10
cienaCesDpQosFlowIngressRcosPolicyThis object specifies the ingress Resolved CoS policy. When the ingress RCoS policy is fixed, dot1dToRcosTag1, dot1dToRcosTag2 or dscpToRcos , then the RCoS profile attached to the Qos Flow is used. When the ingress RCoS policy is 'ignore' then the parent interface's RCoS profile is used.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.9.1.1.11
cienaCesDpAccessFlow
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.10
cienaCesDpAccessFlowTableTable of access flows.
SEQUENCE OF CienaCesDpAccessFlowEntry
.1.3.6.1.4.1.1271.2.1.7.1.10.1
cienaCesDpAccessFlowEntryAccess flow entry in the access flow table.
CienaCesDpAccessFlowEntry
.1.3.6.1.4.1.1271.2.1.7.1.10.1.1
cienaCesDpAccessFlowLiIndexThis object specifies a unique index into the table.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.10.1.1.1
cienaCesDpAccessFlowNameThis object specifies a unique name of the access flow.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.10.1.1.2
cienaCesDpAccessFlowClassifierPrecedenceThis object specifies classifier precedence relative to other access flows sharing the same parent interface.ro
Unsigned32
.1.3.6.1.4.1.1271.2.1.7.1.10.1.1.3
cienaCesDpAccessFlowParentIfIdThis object specifies the parent interface PGID. This object must specify an existing logical interface ID.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.10.1.1.4
cienaCesDpAccessFlowParentIfTypeThis object specifies the parent interface type. Currently an access flow can be associated only with a sub-port type logical interface only.ro
DpTsAttachType
.1.3.6.1.4.1.1271.2.1.7.1.10.1.1.5
cienaCesDpAccessFlowFilterPolicyThis object specifies the access filter action for the current access flow. l2pt-mac-translation means that a frame which classifies will be allowed and potentially undergo a translation of outer mac to/from L2PTro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.10.1.1.6
cienaCesDpPbtTransit
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.11
cienaCesDpPbtTransitTableTable of PBB-TE transit interfaces.
SEQUENCE OF CienaCesDpPbtTransitEntry
.1.3.6.1.4.1.1271.2.1.7.1.11.1
cienaCesDpPbtTransitEntryPBB-TE transit entry in the PBB-TE transit table.
CienaCesDpPbtTransitEntry
.1.3.6.1.4.1.1271.2.1.7.1.11.1.1
cienaCesDpPbtTransitLiIndexThis object specifies a unique index into the table.
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.11.1.1.1
cienaCesDpPbtTransitNameThis object specifies a unique name of an PBB-TE transit.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.11.1.1.2
cienaCesDpPbtTransitParentIfIdThis object specifies the parent interface PGID. This object must specify an existing logical port ID.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.11.1.1.3
cienaCesDpPbtTransitIngressMeterProfileIdThis object specifies the ID of the attached ingress meter profile. When this object indicates a value of 0, it has no ingress meter profile attached to it.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.11.1.1.4
cienaCesDpPbtTransitIngressMeterProfileNameThis object specifies the name of the attached ingress meter profile.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.11.1.1.5
cienaCesDpPbtTransitIngressFloodContainerIdThis object specifies the ID of the attached ingress flood container. When this object indicates a value of 0, it has no ingress flood container attached to it.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.11.1.1.6
cienaCesDpPbtTransitIngressFloodContainerNameThis object specifies the name of the attached ingress flood container.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.11.1.1.7
cienaCesDpPbtTransitIngressRcosProfileIdThis object specifies the ID of the attached ingress Resolved CoS profile. When this object indicates a value of 0, it has no RCoS profile attached to it .ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.11.1.1.8
cienaCesDpPbtTransitIngressRcosProfileNameThis object specifies the name of the attached ingress Resolved CoS profile.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.11.1.1.9
cienaCesDpPbtTransitIngressRcosPolicyThis object specifies the ingress Resolved CoS policy.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.11.1.1.10
cienaCesDpPbtTransitIngressFcosMapIdThis object specifies the ID of the attached ingress Frame CoS Map. When this object indicates a value of 0, it has no ingress FCoS Map attached to it .ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.11.1.1.11
cienaCesDpPbtTransitIngressFcosMapNameThis object specifies the name of the attached ingress Frame CoS Map.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.11.1.1.12
cienaCesDpPbtTransitEgressFcosMapIdThis object specifies the ID of the egress Frame CoS Map. When this object indicates a value of 0, it has no eggress FCoS Map attached to it .ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.11.1.1.13
cienaCesDpPbtTransitEgressFcosMapNameThis object specifies the name of the egress Frame CoS Map.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.11.1.1.14
cienaCesDpPbtTransitIngressBvidTransformThis object specifies PBB-TE transit BVID ingress transform.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.11.1.1.15
cienaCesDpPbtTransitEgressBvidTransformThis object specifies PBB-TE transit BVID egress transform.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.11.1.1.16
cienaCesDpPbtTransitVirtualSwitchIdThis object specifies the ID of the attached virtual switch. When this object indicates a value of 0, it has no virtual switch associated with it.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.11.1.1.17
cienaCesDpPbtTransitRlanIdThis object specifies the ID of the RLAN of the attached virtual switch. Only the default RLAN of 0 is supported.ro
INTEGER
.1.3.6.1.4.1.1271.2.1.7.1.11.1.1.18
cienaCesDpPbtTransitVirtualSwitchNameThis object specifies the name of the attached virtual switch.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.11.1.1.19
cienaCesDpPbtTransitPrivateFwdGroupThis object specifies the private forwarding group.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.11.1.1.20
cienaCesDpPbtTransitIngressMeterPolicyThis object specifies the ingress meter policy. The ingress meter policy has no effect when there is no meter profile attached to this PBB-TE transit . - Non-Hierarchical: Denotes that frames which classify to the Meter instantiated via an attached Meter Profile will be Metered according to the bandwidth parameters of the attached Meter Profile. The resultant colour of the frame is determined by the single meter instance of the logical interface. The frame is processed by a single ingress meter. Resultant Red frames are dropped. - Hierarchical: Denotes that frames which classify to the Meter instantiated via an attached Meter Profile will first be Metered according to the bandwidth parameters of the attached Meter Profile, then subsequently those frames will be Metered according to the bandwidth parameters of the first parent logical interface that has a Meter Profile attached. If no parent logical interface has an attached ingress meter profile, the behaviour for frames that classify to the logical interface is the same as the Non-Hierarchical policy. The resultant color of frames that are metered by the attached meter profile are fed into the parent meter. If the resultant colour of a frame is Red after being processed by a meter at any hierarchical level, the frame is dropped and not fed into a parent meter.ro
DpIngressMeterPolicy
.1.3.6.1.4.1.1271.2.1.7.1.11.1.1.21
cienaCesDpCpuSubInterface
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.12
cienaCesDpCpuSubInterfaceTableCPU sub-interface table.
SEQUENCE OF CienaCesDpCpuSubInterfaceEntry
.1.3.6.1.4.1.1271.2.1.7.1.12.1
cienaCesDpCpuSubInterfaceEntryCPU sub-interface entry.
CienaCesDpCpuSubInterfaceEntry
.1.3.6.1.4.1.1271.2.1.7.1.12.1.1
cienaCesDpCpuSubInterfaceIndexThis object specifies the logical ID for the CPU sub-interface.
Unsigned32
.1.3.6.1.4.1.1271.2.1.7.1.12.1.1.1
cienaCesDpCpuSubInterfaceNameThis object specifies the CPU sub-interface name.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.12.1.1.2
cienaCesDpCpuSubInterfaceEgressL2TransformThis object specifies the egress L2 transform for this CPU sub-interface. Format: push-ethtype.vid.pcpro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.12.1.1.3
cienaCesDpCpuSubInterfaceIngressL2TransformThis object specifies ingress L2 transform for this CPU sub-interface.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.12.1.1.4
cienaCesDpCpuSubInterfaceEgressL3TransformPolicyThis object specifies the egress L3 transform policy type for this CPU sub-interface.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.12.1.1.5
cienaCesDpCpuSubInterfaceEgressRCosPolicyThis object specifies the egress RCoS policy for this CPU sub-interface.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.12.1.1.6
cienaCesDpCpuSubInterfaceEgressRCosProfileIndexThis object specifies the egress RCoS profile index for this CPU sub-interface.ro
Unsigned32
.1.3.6.1.4.1.1271.2.1.7.1.12.1.1.7
cienaCesDpCpuSubInterfaceEgressRCosProfileThis object specifies the egress RCoS profile name for this CPU sub-interface.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.12.1.1.8
cienaCesDpCpuSubInterfaceVirtualSwitchIndexThis object specifies the index of the virtual switch associated with this CPU sub-interface.ro
Unsigned32
.1.3.6.1.4.1.1271.2.1.7.1.12.1.1.9
cienaCesDpCpuSubInterfaceRlanIndexThis object specifies the RLAN index of the virtual switch associated with this CPU sub-interface.ro
Unsigned32
.1.3.6.1.4.1.1271.2.1.7.1.12.1.1.10
cienaCesDpCpuSubInterfaceVirtualSwitchNameThis object specifies the name of the virtual switch associated with this CPU sub-interface.ro
OCTET STRING
.1.3.6.1.4.1.1271.2.1.7.1.12.1.1.11
cienaCesDpPfgProfile
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.13
cienaCesDpPfgProfileTableTable of pfg profiles.
SEQUENCE OF CienaCesDpPfgProfileEntry
.1.3.6.1.4.1.1271.2.1.7.1.13.1
cienaCesDpPfgProfileEntryPrivate Forwarding Group Profile entry in the private forwarding group profile table.
CienaCesDpPfgProfileEntry
.1.3.6.1.4.1.1271.2.1.7.1.13.1.1
cienaCesDpPfgProfileIndexThis object specifies a unique index into the table.
Integer32
.1.3.6.1.4.1.1271.2.1.7.1.13.1.1.1
cienaCesDpPfgProfileNameThis object specifies a unique name for the pfg profile.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.13.1.1.2
cienaCesDpPfgProfileAPolicyThis object specifies the policy for private forwarding group A of the Private Forwarding Group profile. This policy is active when private forward group status is set to enabled.ro
PrivateForwardGroupPolicy
.1.3.6.1.4.1.1271.2.1.7.1.13.1.1.3
cienaCesDpPfgProfileBPolicyThis object specifies the policy for private forwarding group B of the Private Forwarding Group profile. This policy is active when private forward group status is set to enabled.ro
PrivateForwardGroupPolicy
.1.3.6.1.4.1.1271.2.1.7.1.13.1.1.4
cienaCesDpPfgProfileCPolicyThis object specifies the policy for private forwarding group C of the Private Forwarding Group profile. This policy is active when private forward group status is set to enabled.ro
PrivateForwardGroupPolicy
.1.3.6.1.4.1.1271.2.1.7.1.13.1.1.5
cienaCesDpL2CftProfile
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.1.7.1.14
cienaCesDpL2CftProfileTableTable of l2-cft profiles.
SEQUENCE OF CienaCesDpL2CftProfileEntry
.1.3.6.1.4.1.1271.2.1.7.1.14.1
cienaCesDpL2CftProfileEntryLayer 2 Control Frame Tunnelling Profile entry in the private forwarding group profile table.
CienaCesDpL2CftProfileEntry
.1.3.6.1.4.1.1271.2.1.7.1.14.1.1
cienaCesDpL2CftProfileIndexThis object specifies a unique index into the table.
Integer32
.1.3.6.1.4.1.1271.2.1.7.1.14.1.1.1
cienaCesDpL2CftProfileNameThis object specifies a unique name for the l2-cft profile.ro
DisplayString (SNMPv2-TC)
.1.3.6.1.4.1.1271.2.1.7.1.14.1.1.2
cienaCesDpL2CftProfileL2ControlRcosThis object specifies the RCoS to use for control frames An L2CF that is processed with an L2CFT disposition of forwarding is flooded to all logical-interfaces in the virtual switch/RLAN forwarding-domain, and is subject to the same egress restrictions as normal data frames. A frame that is classified as an Untagged L2CF is forwarded by an L2CFT Instance using the RCoS value specified by this object. The object does not apply to a tagged L2CF frame that is classified as a Transparent or L2PT form of a L2CF. Such frames are given the same internal treatment as data frames that are classified to the same logical-interface.ro
Integer32
.1.3.6.1.4.1.1271.2.1.7.1.14.1.1.3
cienaCesDpL2CftProfileL2CftProtocolTableTable of L2-Cft profile Layer 2 Control Frame Tunneling (L2CFT) protocols.
SEQUENCE OF CienaCesDpL2CftProfileL2CftProtocolEntry
.1.3.6.1.4.1.1271.2.1.7.1.14.2
cienaCesDpL2CftProfileL2CftProtocolEntryL2 CFT Profile L2CFT protocol entry in the L2 CFT Profile L2CFT protocol table. Each virtual switch or RLAN in the system is implicitly associated with an L2CFT instance, whether or not it has been given an explicit L2CFT configuration. Normally, Layer 2 Control Frames(L2CFs) received in hardware are either sent to the CPU to be handled or discarded. L2CFT modifies this default behavior, so that the L2CFs for certain protocols can be transformed and forwarded as data frames.
CienaCesDpL2CftProfileL2CftProtocolEntry
.1.3.6.1.4.1.1271.2.1.7.1.14.2.1
cienaCesDpL2CftProfileL2CftProtocolTypeThis object specifies a unique protocol type index into the table.
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.14.2.1.1
cienaCesDpL2CftProfileL2CftProtocolDispositionThis object specifies the L2CFT Profile L2CFT protocol action. There are 2 cases : - When 'cienaCesDpVirtualSwitchRlanL2CftStatus = disabled' or the protocol is not in the Disposition List, then an Untagged L2CF is handled using the ingress logical port's Default Disposition for the protocol, while Transparent and L2PT L2CF forms are handled as normal data frames. - When 'cienaCesDpVirtualSwitchRlanL2CftStatus = enabled' and L2CF protocol is in the Disposition List, the L2CF is either discarded or forwarded depending on the value of this object. An L2CF that is processed with an L2CFT disposition of 'forward' is flooded to all logical-interfaces in the virtual switch/RLAN forwarding-domain, and is subject to the same egress restrictions as normal data frames.ro
Enumeration
.1.3.6.1.4.1.1271.2.1.7.1.14.2.1.2
cienaCesDpMIBNotificationPrefix
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.2.7
cienaCesDpMIBNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.1271.2.2.7.0
cienaCesDpTsMeterFloodContainerUcastThresholdExceededA cienaCesDpTsMeterFloodContainerUcastThresholdExceeded is sent when for a given container profile, the number of unknown unicast packets received becomes greater than or equal to the configuration packet limit, and the value of unknown unicast packet received at the last sampling interval was less than the configuration packet limit. To enable the device to send this notificatio, cienaCesDataplaneUcastTrapState needs to be set to enabled. The cienaCesDataplaneUcastTrapState is set to enabled by default. Variable bindings include cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesDpTsMeterFloodContainerNotifProfileIndex, cienaCesDpTsMeterFloodContainerNotifAttachmentLiType, cienaCesDpTsMeterFloodContainerNotifAttachmentLiIndex, cienaCesDpTsMeterFloodContainerProfileName, and cienaCesDpTsMeterFloodContainerAttachmentInterfaceName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.7.0.1
cienaCesDpTsMeterFloodContainerUcastThresholdNormalA cienaCesDpTsMeterFloodContainerUcastThresholdNormal is sent when for a given container profile, the total number of unknown unicast packet received becomes less than the configured packet limit, and the value of unknown unicast packets received at the last sampling interval was greater than or equal to the configured packet limit. To enable the device to send this notification, cienaCesDataplaneUcastTrapState needs to be set to enabled. The cienaCesDataplaneUcastTrapState is set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesDpTsMeterFloodContainerNotifProfileIndex, cienaCesDpTsMeterFloodContainerNotifAttachmentLiType, cienaCesDpTsMeterFloodContainerNotifAttachmentLiIndex, cienaCesDpTsMeterFloodContainerProfileName, and cienaCesDpTsMeterFloodContainerAttachmentInterfaceName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.7.0.2
cienaCesDpTsMeterFloodContainerBcastThresholdExceededA cienaCesDpTsMeterFloodContainerBcastThresholdExceeded is sent when for a given container profile, the number of broadcast packets received becomes greater than or equal to the configured packet limit, and the value of broadcast packets received at the last sampling interval is less than the configured packet limit. To enable the device to send this notification, cienaCesDataplaneBcastTrapState needs to be set to enabled. The cienaCesDataplaneBcastTrapState is set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesDpTsMeterFloodContainerNotifProfileIndex, cienaCesDpTsMeterFloodContainerNotifAttachmentLiType, cienaCesDpTsMeterFloodContainerNotifAttachmentLiIndex, cienaCesDpTsMeterFloodContainerProfileName, and cienaCesDpTsMeterFloodContainerAttachmentInterfaceName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.7.0.3
cienaCesDpTsMeterFloodContainerBcastThresholdNormalA cienaCesDpTsMeterFloodContainerBcastThresholdNormal is sent when for a given container profile, the total number of broadcast packets received becomes less than the configured packet limit, and the value of broadcast packets received at the last sampling interval is greater than or equal to the configured packet limit. To enable the device to send this notification, cienaCesDataplaneBcastTrapState needs to be set to enabled. The cienaCesDataplaneBcastTrapState is set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesDpTsMeterFloodContainerNotifProfileIndex, cienaCesDpTsMeterFloodContainerNotifAttachmentLiType, cienaCesDpTsMeterFloodContainerNotifAttachmentLiIndex, cienaCesDpTsMeterFloodContainerProfileName, and cienaCesDpTsMeterFloodContainerAttachmentInterfaceName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.7.0.4
cienaCesDpTsMeterFloodContainerL2McastThresholdExceededA cienaCesDpTsMeterFloodContainerL2McastThresholdExceeded is sent when for a given container profile, the number of L2 multicast packets received becomes greater than or equal to the configured packet limit, and the value of L2 multicast packets received at the last sampling interval is less than the configured packet limit. To enable the device to send this notification, cienaCesDataplaneMcastTrapState needs to be set to enabled. The cienaCesDataplaneMcastTrapState is set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesDpTsMeterFloodContainerNotifProfileIndex, cienaCesDpTsMeterFloodContainerNotifAttachmentLiType, cienaCesDpTsMeterFloodContainerNotifAttachmentLiIndex, cienaCesDpTsMeterFloodContainerProfileName, and cienaCesDpTsMeterFloodContainerAttachmentInterfaceName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.7.0.5
cienaCesDpTsMeterFloodContainerL2McastThresholdNormalA cienaCesDpTsMeterFloodContainerL2McastThresholdNormal is sent when for a given container profile, the total number of L2 multicast packets received becomes less than the configured packet limit, and the value of L2 multicast packets received at the last sampling interval is greater than or equal to the configured packet limit. To enable the device to send this notification ,cienaCesDataplaneMcastTrapState needs to be set to enabled. The cienaCesDataplaneMcastTrapState is set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesDpTsMeterFloodContainerNotifProfileIndex, cienaCesDpTsMeterFloodContainerNotifAttachmentLiType, cienaCesDpTsMeterFloodContainerNotifAttachmentLiIndex, cienaCesDpTsMeterFloodContainerProfileName, and cienaCesDpTsMeterFloodContainerAttachmentInterfaceName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.7.0.6
cienaCesDataplaneEgressReflectorEnabledA cienaCesDataplaneEgressReflectorEnabled is sent when the egress reflector feature is enabled for the given sub-port.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.7.0.7
cienaCesDataplaneEgressReflectorDisabledA cienaCesDataplaneEgressReflectorDisabled is sent when the egress reflector feature is disabled for the given sub-port.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.7.0.8
cienaCesDpPortShapingSubscriptionExceedsOperSpeedA cienaCesDpPortShapingSubscriptionExceedsOperSpeed is sent when when ports operational speed becomes lesser than port scheduler cir value. To enable the device to send this notification, cienaCesDataplanePortShapingSubscriptionTrapState needs to be set to enabled. The cienaCesDataplanePortShapingSubscriptionTrapState is set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortPgIdMappingNotifChassisIndex, cienaCesPortPgIdMappingNotifShelfIndex, cienaCesPortPgIdMappingNotifSlotIndex cienaCesPortPgIdMappingNotifPortNumber and cienaCesLogicalPortConfigPortName
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.7.0.9
cienaCesDpPortShapingSubscriptionWithinOperSpeedA cienaCesDpPortShapingSubscriptionWithinOperSpeed is sent when ports operational speed becomes equal or greater than port scheduler cir value. To enable the device to send this notification, cienaCesDataplanePortShapingSubscriptionTrapState needs to be set to enabled. The cienaCesDataplanePortShapingSubscriptionTrapState is set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesPortPgIdMappingNotifChassisIndex, cienaCesPortPgIdMappingNotifShelfIndex, cienaCesPortPgIdMappingNotifSlotIndex cienaCesPortPgIdMappingNotifPortNumber and cienaCesLogicalPortConfigPortName
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.7.0.10
cienaCesDpTsMeterFloodContainerTotalThresholdExceededA cienaCesDpTsMeterFloodContainerTotalThresholdExceeded is sent when for a given container profile, the total number of packets received becomes greater than or equal to the aggregate of all packet limits configured for the container profile, and the value of received packets at the last sampling interval is less than the aggregate of configured packet limits. To enable the device to send this notification, cienaCesDataplaneXcastTrapState needs to be set to enabled. The cienaCesDataplaneXcastTrapState is set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesDpTsMeterFloodContainerNotifProfileIndex, cienaCesDpTsMeterFloodContainerNotifAttachmentLiType, cienaCesDpTsMeterFloodContainerNotifAttachmentLiIndex, cienaCesDpTsMeterFloodContainerProfileName, and cienaCesDpTsMeterFloodContainerAttachmentInterfaceName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.7.0.11
cienaCesDpTsMeterFloodContainerTotalThresholdNormalA cienaCesDpTsMeterFloodContainerTotalThresholdNormal is sent when for a given container profile, the total number of packets received becomes less than the aggregate of all packet limits configured for the container profile, and the value of received packets at the last sampling interval is greater than or equal to the aggregate of configured packet limits. To enable the device to send this notification ,cienaCesDataplaneXcastTrapState needs to be set to enabled. The cienaCesDataplaneXcastTrapState is set to enabled by default. Variable bindings include: cienaGlobalSeverity, cienaGlobalMacAddress, cienaCesDpTsMeterFloodContainerNotifProfileIndex, cienaCesDpTsMeterFloodContainerNotifAttachmentLiType, cienaCesDpTsMeterFloodContainerNotifAttachmentLiIndex, cienaCesDpTsMeterFloodContainerProfileName, and cienaCesDpTsMeterFloodContainerAttachmentInterfaceName.
NOTIFICATION-TYPE
.1.3.6.1.4.1.1271.2.2.7.0.12
CIENA-CES-DATAPLANE-MIB - SNMP MIB Reference | MIBs Explorer