CIENA-CES-CFM-MIB
AI MIB Summary
The CIENA-CES-CFM-MIB enables the configuration and monitoring of Connectivity Fault Management (CFM) operations on Ciena Carrier Ethernet Services (CES) platforms, specifically tracking maintenance association (MA) states, continuity check (CCM) message counters, and fault notification events for Layer 2 Ethernet service integrity.
This module defines the CFM configuration and notification objects.
Main OID:
cienaCesCfmMIB.1.3.6.1.4.1.1271.2.1.4
328
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
328 total| Object Name |
|---|
cienaCesCfmMIBThis module defines the CFM configuration and notification objects. MODULE-IDENTITY .1.3.6.1.4.1.1271.2.1.4 |
cienaCesCfmMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.4.1 |
cienaCesCfmService OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.4.1.2 |
cienaCesCfmMEP OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.4.1.3 |
cienaCesCfmMEPTableThe (conceptual) table listing the configuration
parameters for the CFM MEP table. SEQUENCE OF CienaCesCfmMEPEntry .1.3.6.1.4.1.1271.2.1.4.1.3.1 |
cienaCesCfmMEPEntryAn entry (conceptual row) in the cienaCesCfmMEPTable. CienaCesCfmMEPEntry .1.3.6.1.4.1.1271.2.1.4.1.3.1.1 |
cienaCesCfmMEPIdThis MIB object is used as the index in the table and indicates
the MEP ID for the given service. Unsigned32 .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.1 |
cienaCesCfmMEPMacAddrThis object indicates the MAC address received on the
given service and MEP ID.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.2 |
cienaCesCfmMEPAdminStateThis object is used to specify the administrative state of the CFM MEP.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.3 |
cienaCesCfmMEPOperStateThis object is used to specify the operational state of the CFM MEP.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.4 |
cienaCesCfmMEPDirectionThis object is used to specify the MEP direction of the service.ro Enumeration .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.5 |
cienaCesCfmMEPCCMStateThis object indicates the CCM transmission for the service specified by cienaCesCfmServiceType.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.6 |
cienaCesCfmMEPCCMPriorityThis object indicates the priority of CCM messages transmitted.ro INTEGER .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.7 |
cienaCesCfmMEPLTMPriorityThis object indicates the priority received on the given service and port.ro INTEGER .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.8 |
cienaCesCfmMEPLiTypeThis object indicates the logical interface type on which the MEP is created.ro Enumeration .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.9 |
cienaCesCfmMEPLiIndexThis object indicates the logical interface index for creating the MEP.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.10 |
cienaCesCfmMEPServiceNameThis object is used to specify the service name assigned to this port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.11 |
cienaCesCfmMEPSubPortNameThis object indicates the sub-port, PBB-TE service or MPLS VC name assigned to the given service and port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.12 |
cienaCesCfmMEPVsPbtNameThis object indicates the virtual switch or PBB-TE tunnel assigned to the given service and port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.13 |
cienaCesCfmMEPLogicalPortNameThis object indicates the logical port name assigned to the given service and port.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.14 |
cienaCesCfmMEPSubPortIndexThis object is used to specify the CFM sub-port index.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.15 |
cienaCesCfmMEPEncapsulationThis object is used to specify the encapsulation applied to the service and port.ro Enumeration .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.16 |
cienaCesCfmMEPLeadPortSlotIndexThis object is used as to specify the agent slot that the MEP is in.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.17 |
cienaCesCfmMEPPBTBvidThis object indicates the BVID assigned to the given service and port.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.18 |
cienaCesCfmMEPPBTEtypeThis object indicates the Ethertype assigned to the given service and port.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.19 |
cienaCesCfmMEPL2XformTypeThis object indicates the type of MEP L2 transform.
no-op(1) type indicates that there is no MEP level transform.
auto(2) type indicates that the MEP inherits the sub-port vtag-stack.ro Enumeration .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.20 |
cienaCesCfmMEPSignalDegradeMonitoringStatusThis object enables/disables signal degrading monitoring on the mep.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.21 |
cienaCesCfmMEPSignalDegradeTriggerModeThis object sets the signal degrade trigger mode on the mep.
nearEnd: In this mode, near end frame loss shall be compared with cienaCesCfmSyntheticLossSessionSdSetThreshold
and cienaCesCfmSyntheticLossSessionSdClearThreshold.
nearFarEnd: In this mode, both near end and far end frame loss shall be compared with
cienaCesCfmSyntheticLossSessionSdSetThreshold and cienaCesCfmSyntheticLossSessionSdClearThreshold.ro Enumeration .1.3.6.1.4.1.1271.2.1.4.1.3.1.1.22 |
cienaCesCfmRemoteMEP OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.4.1.4 |
cienaCesCfmRemoteMEPTableThe (conceptual) table listing the display
parameters for the remote MEP table. SEQUENCE OF CienaCesCfmRemoteMEPEntry .1.3.6.1.4.1.1271.2.1.4.1.4.1 |
cienaCesCfmRemoteMEPEntryAn entry (conceptual row) in the cienaCesCfmRemoteMEPTable. CienaCesCfmRemoteMEPEntry .1.3.6.1.4.1.1271.2.1.4.1.4.1.1 |
cienaCesCfmRemoteMEPIDThis object is used as an index in the table and is used to specify the MEP ID. Unsigned32 .1.3.6.1.4.1.1271.2.1.4.1.4.1.1.1 |
cienaCesCfmRemoteMEPMacAddrThis object is used to specify the MAC address of the logical port where the remote MEP is configured.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.4.1.4.1.1.2 |
cienaCesCfmRemoteMEPAdminStateThis object is used to specify the administrative state of the remote MEP state machine.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.4.1.4.1.1.3 |
cienaCesCfmRemoteMEPOperStateThis object is used to specify the operational state of the remote MEP state machine.ro Enumeration .1.3.6.1.4.1.1271.2.1.4.1.4.1.1.4 |
cienaCesCfmRemoteMEPTimeThis object is used to specify the time at which the remote MEP state machine last
entered RMEP_FAILED or RMEP_OK states.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1271.2.1.4.1.4.1.1.5 |
cienaCesCfmRemoteMEPKLastMacStatusThis object is used to specify the last MAC status received.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.4.1.4.1.1.6 |
cienaCesCfmRemoteMEPFailureFlagThis object is used to specify the remote MEP failure flag.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.4.1.4.1.1.7 |
cienaCesCfmRemoteMEPCCMErrorFlagThis object is used to specify the MEP CCM error flag.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.4.1.4.1.1.8 |
cienaCesCfmRemoteMEPRDIErrorFlagThis object is used to specify the MEP RDI error flag.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.4.1.4.1.1.9 |
cienaCesCfmRemoteMEPSubPortNameThe object indicates the subport name of the remote MEP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.4.1.4.1.1.10 |
cienaCesCfmRemoteMEPServiceNameThis object is used to specify the service name of the remote MEP.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.4.1.4.1.1.11 |
cienaCesCfmRemoteMEPLastPortStatusThis object is used as to specify the remote MEP last port status.ro Enumeration .1.3.6.1.4.1.1271.2.1.4.1.4.1.1.12 |
cienaCesCfmRemoteMEPLastInterfaceStatusThis object is used as to specify the remote MEP interface status.ro Enumeration .1.3.6.1.4.1.1271.2.1.4.1.4.1.1.13 |
cienaCesCfmRemoteMEPCCMLevelThis object indicates the remote MEP CCM level.ro INTEGER .1.3.6.1.4.1.1271.2.1.4.1.4.1.1.14 |
cienaCesCfmRemoteMEPHoldStateThis object indicates the hold state for the remote MEP entry.ro Enumeration .1.3.6.1.4.1.1271.2.1.4.1.4.1.1.15 |
cienaCesCfmDelay OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.4.1.5 |
cienaCesCfmDelayMsgTableThe (conceptual) table listing the configuration
parameters for the DelayMeasurementMsg. SEQUENCE OF CienaCesCfmDelayMsgEntry .1.3.6.1.4.1.1271.2.1.4.1.5.1 |
cienaCesCfmDelayMsgEntryAn entry (conceptual row) in the cienaCesCfmDelayMsgTable. CienaCesCfmDelayMsgEntry .1.3.6.1.4.1.1271.2.1.4.1.5.1.1 |
cienaCesCfmDelayMsgLocalMEPIdThis object is used to specify the local MEP ID. INTEGER .1.3.6.1.4.1.1271.2.1.4.1.5.1.1.1 |
cienaCesCfmDelayMsgTargetMEPIDThis object is used to specify the MEP ID.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.4.1.5.1.1.2 |
cienaCesCfmDelayMsgServiceNameThis object indicates the service associated with the
delay message.ro DisplayString .1.3.6.1.4.1.1271.2.1.4.1.5.1.1.3 |
cienaCesCfmDelayMsgAverageDelayThresholdThis object indicates the threshold for the average delay in microseconds.ro INTEGER .1.3.6.1.4.1.1271.2.1.4.1.5.1.1.4 |
cienaCesCfmDelayMsgAverageJitterThresholdThis object indicates the threshold value for average jitter in microseconds.ro INTEGER .1.3.6.1.4.1.1271.2.1.4.1.5.1.1.5 |
cienaCesCfmDelayMsgMaximumDelayThresholdThis object indicates the threshold for the maximum delay.ro INTEGER .1.3.6.1.4.1.1271.2.1.4.1.5.1.1.6 |
cienaCesCfmDelayMsgMaximumJitterThresholdThis object indicates the threshold value for maximum jitter.ro INTEGER .1.3.6.1.4.1.1271.2.1.4.1.5.1.1.7 |
cienaCesCfmDelayMsgAverageDelayThis object indicates the average delay.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.1271.2.1.4.1.5.1.1.8 |
cienaCesCfmDelayMsgAverageJitterThis object indicates the average jitter.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.1271.2.1.4.1.5.1.1.9 |
cienaCesCfmDelayMsgMaximumDelayThis object indicates the maximum delay.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.1271.2.1.4.1.5.1.1.10 |
cienaCesCfmDelayMsgMaximumJitterThis object indicates the maximum jitter.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.1271.2.1.4.1.5.1.1.11 |
cienaCesCfmDelayMsgMinimumDelayThis object indicates the minimum delay.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.1271.2.1.4.1.5.1.1.12 |
cienaCesCfmDelayMsgMinimumJitterThis object indicates the minimum jitter.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.1271.2.1.4.1.5.1.1.13 |
cienaCesCfmDelayMsgAverageDelayVariationThis object indicates the Average Inter Frame Delay Variation.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.1271.2.1.4.1.5.1.1.14 |
cienaCesCfmDelayMsgMaximumDelayVariationThis object indicates the Maximum Inter Frame Delay Variation.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.1271.2.1.4.1.5.1.1.15 |
cienaCesCfmDelayMsgMinimumDelayVariationThis object indicates the Minimum Inter Frame Delay Variation.ro Unsigned32 UNITS "microseconds" .1.3.6.1.4.1.1271.2.1.4.1.5.1.1.16 |
cienaCesCfmDelayMsgAverageDelayVariationThresholdThis object indicates the threshold value for average Inter Frame Delay Variation.
A value of -1 disables the generation of faults. A value of 0 or greater
is compared to the Average Delay Variation measured in the test and a fault is generated
if the threshold is exceeded.ro Integer32 (-1..65535) UNITS "microseconds" .1.3.6.1.4.1.1271.2.1.4.1.5.1.1.17 |
cienaCesCfmDelayMsgMaximumDelayVariationThresholdThis object indicates the threshold value for maximum Inter Frame Delay Variation.
A value of -1 disables the generation of faults. A value of 0 or greater
is compared to the Maximum Delay Variation measured in the test and a fault is generated
if the threshold is exceeded.ro Integer32 (-1..65535) UNITS "microseconds" .1.3.6.1.4.1.1271.2.1.4.1.5.1.1.18 |
cienaCesCfmDelayMsgPriorityThis object specifies the priority that will be encoded in the DMM message.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.4.1.5.1.1.19 |
cienaCesCfmDelayMsgCountThis object specifies the number of DMM messages that will be transmitted for one Iteration.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.4.1.5.1.1.20 |
cienaCesCfmDelayMsgIterationsThis object specifies the number of iterations the test has to be conducted.
A zero value means that test is continuous, and iterations are infinite.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.4.1.5.1.1.21 |
cienaCesCfmDelayMsgRepeatDelayThis object specifies the delay in minutes between consecutive test iterations.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.4.1.5.1.1.22 |
cienaCesCfmDelayMsgDurationThis object specifies the duration of time the test took in seconds to complete one iteration.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.4.1.5.1.1.23 |
cienaCesCfmFrameLoss OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.4.1.6 |
cienaCesCfmFrameLossMsgTableThe (conceptual) table listing the configuration
parameters for the FrameLossMeasurementMsg. SEQUENCE OF CienaCesCfmFrameLossMsgEntry .1.3.6.1.4.1.1271.2.1.4.1.6.1 |
cienaCesCfmFrameLossMsgEntryAn entry (conceptual row) in the cienaCesCfmFrameLossMsgTable. CienaCesCfmFrameLossMsgEntry .1.3.6.1.4.1.1271.2.1.4.1.6.1.1 |
cienaCesCfmFrameLossMsgLocalMEPIdThis object is used to specify the local MEP ID at the source. INTEGER .1.3.6.1.4.1.1271.2.1.4.1.6.1.1.1 |
cienaCesCfmFrameLossMsgTargetMEPIDThis object is used to specify the MEP ID.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.4.1.6.1.1.2 |
cienaCesCfmFrameLossMsgNearLossThresholdIndicates the threshold value for the near-end frame loss.ro INTEGER .1.3.6.1.4.1.1271.2.1.4.1.6.1.1.3 |
cienaCesCfmFrameLossMsgFarLossThresholdThis object indicates the threshold value for the far-end frame loss.ro INTEGER .1.3.6.1.4.1.1271.2.1.4.1.6.1.1.4 |
cienaCesCfmFrameLossMsgServiceNameThis object indicates the service associated with
the frame loss measurement message (LMM).ro DisplayString .1.3.6.1.4.1.1271.2.1.4.1.6.1.1.5 |
cienaCesCfmFrameLossMsgFrameLossNearThis object indicates the near-end frame loss. For a MEP,
near-end frame loss refers to frame loss associated with the
ingress data frames.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.4.1.6.1.1.6 |
cienaCesCfmFrameLossMsgFrameLossFarThis object indicates the far-end frame loss. For a MEP,
far-end frame loss refers to frame loss associated with the
egress data frames.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.4.1.6.1.1.7 |
cienaCesCfmServiceFaultNotifAttrs OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.4.1.7 |
cienaCesCfmServiceFaultNotifTableThe (conceptual) table listing the configuration
parameters for the CFM service table. SEQUENCE OF CienaCesCfmServiceFaultNotifEntry .1.3.6.1.4.1.1271.2.1.4.1.7.1 |
cienaCesCfmServiceFaultNotifEntryAn entry (conceptual row) in the cienaCesCfmServiceFaultNotifTable. CienaCesCfmServiceFaultNotifEntry .1.3.6.1.4.1.1271.2.1.4.1.7.1.1 |
cienaCesCfmServiceFaultTimeThis object indicates the time at which the fault occurred.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.1271.2.1.4.1.7.1.1.1 |
cienaCesCfmServiceFaultTypeThis object indicates the type of fault.ro Enumeration .1.3.6.1.4.1.1271.2.1.4.1.7.1.1.2 |
cienaCesCfmServiceFaultDescThis object indicates the description of the fault.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.4.1.7.1.1.3 |
cienaCesCfmServiceFaultMepThis object indicates the MEP ID of the MEP reporting the fault.ro INTEGER .1.3.6.1.4.1.1271.2.1.4.1.7.1.1.4 |
cienaCesCfmServiceVsPbtNameThis object indicates the virtual switch or PBB-TE tunnel
assigned to the given service.ro DisplayString .1.3.6.1.4.1.1271.2.1.4.1.7.1.1.5 |
cienaCesCfmMaintenance OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.4.1.8 |
cienaCesCfmMaintenanceDomainTableThe (conceptual) table listing the configuration
parameters for the CFM maintenance domain table. SEQUENCE OF CienaCesCfmMaintenanceDomainEntry .1.3.6.1.4.1.1271.2.1.4.1.8.1 |
cienaCesCfmMaintenanceDomainEntryAn entry (conceptual row) in the cienaCesCfmMaintenanceDomainTable. CienaCesCfmMaintenanceDomainEntry .1.3.6.1.4.1.1271.2.1.4.1.8.1.1 |
cienaCesCfmMaintenanceDomainIndexThis object indicates the unique index in the table.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.4.1.8.1.1.1 |
cienaCesCfmMaintenanceDomainLevelThis object indicates the maintenance domain level.ro INTEGER .1.3.6.1.4.1.1271.2.1.4.1.8.1.1.2 |
cienaCesCfmMaintenanceDomainNameThis object indicates the maintenance domain name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.4.1.8.1.1.3 |
cienaCesCfmMaintenanceDomainServiceCountThis object indicates the number of CFM services mapped to this maintenance domain.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.4.1.8.1.1.4 |
cienaCesCfmServiceFrameBudget OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.4.1.9 |
cienaCesCfmServiceFrameBudgetTableThe (conceptual) table listing the configuration
parameters for the CFM service frame budget table. SEQUENCE OF CienaCesCfmServiceFrameBudgetEntry .1.3.6.1.4.1.1271.2.1.4.1.9.1 |
cienaCesCfmServiceFrameBudgetEntryAn entry (conceptual row) in the cienaCesCfmServiceFrameBudgetTable. CienaCesCfmServiceFrameBudgetEntry .1.3.6.1.4.1.1271.2.1.4.1.9.1.1 |
cienaCesCfmSlotIndexThis object indicates the slot number. INTEGER .1.3.6.1.4.1.1271.2.1.4.1.9.1.1.1 |
cienaCesCfmServiceFrameBudgetSlotThis object indicates the CFM frame budget for the slot for the given service.ro Counter32 UNITS "frames/sec" .1.3.6.1.4.1.1271.2.1.4.1.9.1.1.2 |
cienaCesCfmFrameBudgetGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.4.1.10 |
cienaCesCfmGlobalControlModuleFrameBudgetControl Module Frame Budget.ro Counter32 .1.3.6.1.4.1.1271.2.1.4.1.10.1 |
cienaCesCfmFrameBudgetGlobalTableThe (conceptual) table listing the configuration
parameters for the CFM global frame budget table. SEQUENCE OF CienaCesCfmFrameBudgetGlobalEntry .1.3.6.1.4.1.1271.2.1.4.1.10.2 |
cienaCesCfmFrameBudgetGlobalEntryAn entry (conceptual row) in the cienaCesCfmGlobalFrameBudgetTable. CienaCesCfmFrameBudgetGlobalEntry .1.3.6.1.4.1.1271.2.1.4.1.10.2.1 |
cienaCesCfmFrameBudgetGlobalSlotThis object indicates the global CFM frame budget for the slot.ro Counter32 UNITS "frames/sec" .1.3.6.1.4.1.1271.2.1.4.1.10.2.1.1 |
cienaCesCfmGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.4.1.11 |
cienaCesCfmStateThis object indicates the globally configured CFM state.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.4.1.11.1 |
cienaCesCfmEtherTypeThis object indicates the Ethertype value used for CFM frames.ro EthType .1.3.6.1.4.1.1271.2.1.4.1.11.2 |
cienaCesCfmMEPHoldTimeThis object indicates the time to hold a MEP in an inactive state.ro Integer32 UNITS "milliseconds" .1.3.6.1.4.1.1271.2.1.4.1.11.3 |
cienaCesCfmY1731EtherTypeThis object indicates the optional alternate Ethertype for Y.1731 frames.ro EthType .1.3.6.1.4.1.1271.2.1.4.1.11.4 |
cienaCesCfmGlobalSLMDefaultCountThe global default count for synthetic loss measurement tests.ro Integer32 .1.3.6.1.4.1.1271.2.1.4.1.11.5 |
cienaCesCfmSyntheticLoss OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.4.1.12 |
cienaCesCfmSyntheticLossSessionTableThe (conceptual) table listing the configuration
parameters for the SyntheticLossMeasurement(SLM) message. SEQUENCE OF CienaCesCfmSyntheticLossSessionEntry .1.3.6.1.4.1.1271.2.1.4.1.12.1 |
cienaCesCfmSyntheticLossSessionEntryAn entry in the cienaCesCfmSyntheticLossSessionTable. CienaCesCfmSyntheticLossSessionEntry .1.3.6.1.4.1.1271.2.1.4.1.12.1.1 |
cienaCesCfmSyntheticLossSessionServiceIndexThis object specifies the service index of the SLM message. Unsigned32 .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.1 |
cienaCesCfmSyntheticLossSessionLocalMEPIdThis object specifies the local mep id of the SLM message. Integer32 .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.2 |
cienaCesCfmSyntheticLossSessionTargetMEPIdThis object specifies the target mepid of the SLM message. Integer32 .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.3 |
cienaCesCfmSyntheticLossSessionTestIdThis object specifies the test ID of the SLM message. Unsigned32 .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.4 |
cienaCesCfmSyntheticLossSessionServiceNameThis object specifies the service name of the SLM message.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.5 |
cienaCesCfmSyntheticLossSessionPriorityThis object specifies the priority that will be encoded in the SLM message.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.6 |
cienaCesCfmSyntheticLossSessionCountThis object specifies the number of SLM messages that will be transmitted during this session.ro Unsigned32 (0 | 2..65535) .1.3.6.1.4.1.1271.2.1.4.1.12.1.1.7 |
cienaCesCfmNotifMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.2.5 |
cienaCesCfmNotifMIBNotification OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.2.5.0 |
cienaCesCfmSyntheticLossSessionSLMIntervalThis object specifies the message interval at which SLMs will be transmitted.
The values 3-7 represent indices to CFM intervals as follows:
3
4
5
6
7
::= { cienaCesCfmSyntheticLossSessionEntry 8 }
cienaCesCfmSyntheticLossSessionIterations OBJECT-TYPE
SYNTAX Unsigned32 (0..60)
MAX-ACCESS read-only
STATUS current
DESCRIPTIONro Unsigned32 (0 | 3..7) .1.3.6.1.4.1.1271.2.2.5.0.24 |
cienaCesCfmStatisticsMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.4 |
cienaCesCfmMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.4.1 |
cienaCesCfmGlobalMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.4.1.1 |
cienaCesCfmGlobalStatsClearSetting this object clears CFM statistics globally.rw CienaStatsClear (CIENA-TC) .1.3.6.1.4.1.1271.2.3.4.1.1.1 |
cienaCesCfmGlobalFrameBudget OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.4.1.1.2 |
cienaCesCfmGlobalFrameBudgetControlModuleControl Module Frame Budget is deprecated because it is moved from statistics to node definitions.rodeprecated Counter32 .1.3.6.1.4.1.1271.2.3.4.1.1.2.1 |
cienaCesCfmGlobalFrameBudgetSlot1Slot1 Frame Budget.rodeprecated Counter32 .1.3.6.1.4.1.1271.2.3.4.1.1.2.2 |
cienaCesCfmGlobalFrameBudgetSlot2Slot2 Frame Budget.rodeprecated Counter32 .1.3.6.1.4.1.1271.2.3.4.1.1.2.3 |
cienaCesCfmGlobalFrameBudgetSlot3Slot3 Frame Budget.rodeprecated Counter32 .1.3.6.1.4.1.1271.2.3.4.1.1.2.4 |
cienaCesCfmGlobalFrameBudgetSlot4Slot4 Frame Budget.rodeprecated Counter32 .1.3.6.1.4.1.1271.2.3.4.1.1.2.5 |
cienaCesCfmGlobalFrameBudgetSlot5Slot5 Frame Budget.rodeprecated Counter32 .1.3.6.1.4.1.1271.2.3.4.1.1.2.6 |
cienaCesCfmGlobalFrameBudgetSlot6Slot6 Frame Budget.rodeprecated Counter32 .1.3.6.1.4.1.1271.2.3.4.1.1.2.7 |
cienaCesCfmGlobalFrameBudgetSlot7Slot7 Frame Budget.rodeprecated Counter32 .1.3.6.1.4.1.1271.2.3.4.1.1.2.8 |
cienaCesCfmGlobalFrameBudgetSlot8Slot8 Frame Budget.rodeprecated Counter32 .1.3.6.1.4.1.1271.2.3.4.1.1.2.9 |
cienaCesCfmGlobalFrameBudgetSlot9Slot9 Frame Budget.rodeprecated Counter32 .1.3.6.1.4.1.1271.2.3.4.1.1.2.10 |
cienaCesCfmGlobalFrameBudgetSlot10Slot10 Frame Budget.rodeprecated Counter32 .1.3.6.1.4.1.1271.2.3.4.1.1.2.11 |
cienaCesCfmGlobalStats OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.4.1.1.3 |
cienaCesCfmGlobalStatsTxTotalFramesThe number of CFM frames sent.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.3.1 |
cienaCesCfmGlobalStatsTxFloodedframesThe number of flooded frames sent.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.3.2 |
cienaCesCfmGlobalStatsTxFloodignoredInvalidLevelThis counter is incremented when the frame's destination MAC is not the expected multicast destination MAC for the frame's MD level.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.3.3 |
cienaCesCfmGlobalStatsTxFloodignoredHighLevelMepExistThis counter is incremented when there is a MEP at a higher MD level than the frame's MD level that blocks the frame from being flooded.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.3.4 |
cienaCesCfmGlobalStatsTxFloodignoredSTPStateThis counter is incremented when the STP state of the ingress or egress port is something other than forwarding.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.3.5 |
cienaCesCfmGlobalStatsRxTotalFramesThe number of frames received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.3.6 |
cienaCesCfmGlobalStatsRxDropInvalidEtypeThe number of frames dropped when the mode is administratively disabled.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.3.7 |
cienaCesCfmGlobalStatsRxDropInvalidOpCodeThe number of received invalid opcode frames dropped.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.3.8 |
cienaCesCfmGlobalStatsRxDropL2DAHeaderLevelMismatchThe number of frames dropped when the system is not in STP forwarding mode.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.3.9 |
cienaCesCfmGlobalStatsRxTotalMalformedFramesThe number of malformed CFM frames received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.3.10 |
cienaCesCfmGlobalCCMStats OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.4.1.1.4 |
cienaCesCfmGlobalCCMStatsTxTotalCCMThe total number of CCM frames sent.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.4.1 |
cienaCesCfmGlobalCCMStatsTxTotalCCMFloodedThe total number of flooded CCM frames sent.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.4.2 |
cienaCesCfmGlobalCCMStatsRxTotalCCMThe number of valid frames received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.4.3 |
cienaCesCfmGlobalCCMStatsRxTotalCCMSequenceErrorsThe number of errored CCM frames received in sequence.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.4.5 |
cienaCesCfmGlobalCCMStatsRxInvalidMAIDThe number of MD level CFM frames received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.4.6 |
cienaCesCfmGlobalCCMStatsRxInvalidCCMIntervalThe number of MAID Xcon CFM frames received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.4.7 |
cienaCesCfmGlobalCCMStatsRxInvalidFirstTlvOffsetThe number of frames dropped when the mode is administratively disabled.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.4.8 |
cienaCesCfmGlobalCCMStatsRxInvalidPortStatusTlvThe number of CCM frames received with invalid port status TLV.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.4.9 |
cienaCesCfmGlobalCCMStatsRxInvalidInterfaceStatusTlvThe number of invalid CCM frames received with invalid interface status TLV.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.4.11 |
cienaCesCfmGlobalCCMStatsRxInvalidLogicalInterfaceThe number of invalid CCM frames received with invalid logical interface status TLV.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.4.12 |
cienaCesCfmGlobalCCMStatsRxInvalidServiceInstanceThe number of invalid CCM frames received on invalid service instance.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.4.13 |
cienaCesCfmGlobalCCMStatsRxInvalidPBTEncapTunnelThe number of invalid CCM frames received on invalid PBB-TE encapsulation tunnel.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.4.14 |
cienaCesCfmGlobalCCMStatsRxDropAdminDisableThe number of CCM frames dropped because of a disabled administrative state.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.4.15 |
cienaCesCfmGlobalCCMStatsRxDropSTPstatenotForwardingThe number of CCM frames dropped because STP state was not forwarding.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.4.16 |
cienaCesCfmGlobalCCMStatsRxDropCCMBlockedbyOppMepThe number of invalid CCM frames dropped because CCM was blocked by opposite MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.4.17 |
cienaCesCfmGlobalCCMStatsRxDropCCMLeakageThe number of CCM frames dropped because of CCM leakage.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.4.18 |
cienaCesCfmGlobalCCMStatsRxDropCCMTooLongThe number of invalid CCM received frames dropped because CCM was too long.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.4.19 |
cienaCesCfmGlobalCCMStatsRxDropCCMServiceDisabledThe number of CCM frames received and dropped because the service was disabled.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.4.20 |
cienaCesCfmGlobalCCMStatsRxTotalErrorCCMThe number of CCM frames received with Error CCM fault.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.4.21 |
cienaCesCfmGlobalCCMStatsRxTotalMalformedCCMThe number of malformed CCM frames received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.4.22 |
cienaCesCfmGlobalCCMStatsRxTotalMEPCCMThe number of CCM frames received by CFM MEPs.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.4.23 |
cienaCesCfmGlobalCCMStatsRxTotalMIPCCMThe number of CCM frames received by CFM MIPs.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.4.24 |
cienaCesCfmGlobalLoopbackStats OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.4.1.1.5 |
cienaCesCfmGlobalLoopbackStatsTxTotalLBMThe number of loopback message frames sent.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.5.1 |
cienaCesCfmGlobalLoopbackStatsTxTotalLBRThe total number of loopback reply frames sent.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.5.2 |
cienaCesCfmGlobalLoopbackStatsRxTotalLBMThe total number of loopback message frames received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.5.3 |
cienaCesCfmGlobalLoopbackStatsRxTotalLBRThe total number of loopback reply frames received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.5.4 |
cienaCesCfmGlobalLoopbackStatsRxTotalInOrderLBRThe total number of in order loopback reply frames received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.5.5 |
cienaCesCfmGlobalLoopbackStatsRxTotalOutOfOrderLBRThe total number of out of order loopback reply frames received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.5.6 |
cienaCesCfmGlobalLoopbackStatsRxTotalContentMismatchLBRThe total number of content mismatch loopback reply frames sent.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.5.7 |
cienaCesCfmGlobalLoopbackStatsRxTotalUnexpectedLBRThe total number of unexpected loopback reply frames received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.5.8 |
cienaCesCfmGlobalLoopbackStatsRxLBMInvalidFirstTLVOffsetThe total number of loopback message frames received with invalid TLV offset.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.5.9 |
cienaCesCfmGlobalLoopbackStatsRxLBRInvalidFirstTLVOffsetThe total number of loopback reply frames received with invalid first TLV offset.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.5.10 |
cienaCesCfmGlobalLoopbackStatsRxUnresolvedLBMThe total number of unresolved loopback message frames received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.5.11 |
cienaCesCfmGlobalLoopbackStatsRxUnresolvedLBRThe total number of unresolved loopback reply frames received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.5.12 |
cienaCesCfmGlobalLoopbackStatsRxTotalMalformedLBMThe total number of malformed loopback messages received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.5.13 |
cienaCesCfmGlobalLinkTraceStats OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.4.1.1.6 |
cienaCesCfmGlobalLinkTraceStatsTxTotalLTMThe number of linktrace messages transmitted.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.6.1 |
cienaCesCfmGlobalLinkTraceStatsTxTotalLTRThe number of linktrace replies transmitted.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.6.2 |
cienaCesCfmGlobalLinkTraceStatsRxTotalLTMThe number of linktrace messages received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.6.3 |
cienaCesCfmGlobalLinkTraceStatsRxTotalLTRThe number of linktrace replies received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.6.4 |
cienaCesCfmGlobalLinkTraceStatsRxTotalUnexpectedLTRThe number of unexpected linktrace replies received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.6.5 |
cienaCesCfmGlobalLinkTraceStatsRxLTMInvalidFirstTLVOffsetThe number of linktrace messages received with an invalid first TLV offset.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.6.6 |
cienaCesCfmGlobalLinkTraceStatsRxLTRInvalidFirstTLVOffsetThe number of linktrace replies received with an invalid first TLV offset.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.6.7 |
cienaCesCfmGlobalLinkTraceStatsRxLTRInvalidRelayActionThe number of linktrace replies received with an invalid relay action.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.6.8 |
cienaCesCfmGlobalLinkTraceStatsRxUnresolvedLTMThe number of linktrace messages received that could not be resolved.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.6.9 |
cienaCesCfmGlobalLinkTraceStatsRxUnresolvedLTRThe number of linktrace replies received that could not be resolved.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.6.10 |
cienaCesCfmGlobalDelayMeasurementStats OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.4.1.1.7 |
cienaCesCfmGlobalDelayMeasurementStatsTxTotalDMMThe number of DMM frames transmitted.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.7.1 |
cienaCesCfmGlobalDelayMeasurementStatsTxTotalDMRThe number of DMR frames transmitted.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.7.2 |
cienaCesCfmGlobalDelayMeasurementStatsRxTotalDMMThe number of DMM frames received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.7.3 |
cienaCesCfmGlobalDelayMeasurementStatsRxTotalDMRThe number of DMR frames received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.7.4 |
cienaCesCfmGlobalLossMeasurementStats OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.4.1.1.8 |
cienaCesCfmGlobalLossMeasurementStatsTxTotalLMMThe number of LMM frames transmitted.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.8.1 |
cienaCesCfmGlobalLossMeasurementStatsTxTotalLMRThe number of LMR frames transmitted.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.8.2 |
cienaCesCfmGlobalLossMeasurementStatsRxTotalLMMThe number of LMM frames received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.8.3 |
cienaCesCfmGlobalLossMeasurementStatsRxTotalLMRThe number of LMR frames received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.8.4 |
cienaCesCfmGlobalSyntheticLossMeasurementStats OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.4.1.1.9 |
cienaCesCfmGlobalSyntheticLossMeasurementStatsTxTotalSLMThe total number of synthetic loss messages transmitted.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.9.1 |
cienaCesCfmGlobalSyntheticLossMeasurementStatsTxTotalSLRThe total number of synthetic loss replies transmitted.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.9.2 |
cienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalSLMThe total number of synthetic loss messages received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.9.3 |
cienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalSLRThe total number of synthetic loss replies received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.9.4 |
cienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalValidSLMThe total number of valid synthetic loss messages received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.9.5 |
cienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalValidSLRThe total number of valid synthetic loss replies received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.9.6 |
cienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalInvalidSLMThe total number of invalid synthetic loss messages received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.9.7 |
cienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalInvalidSLRThe total number of invalid synthetic loss replies received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.9.8 |
cienaCesCfmGlobalSyntheticLossMeasurementStatsRxDropSLMThe total number of synthetic loss messages dropped due to lack of responder resources.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.1.9.9 |
cienaCesCfmServiceStats OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.4.1.2 |
cienaCesCfmServiceStatsTableThe (conceptual) table listing the statistics
for a given CFM service. SEQUENCE OF CienaCesCfmServiceStatsEntry .1.3.6.1.4.1.1271.2.3.4.1.2.1 |
cienaCesCfmServiceStatsEntryAn entry (conceptual row) in the CienaCesCfmServiceTable. CienaCesCfmServiceStatsEntry .1.3.6.1.4.1.1271.2.3.4.1.2.1.1 |
cienaCesCfmServiceStatsTotalTxThe total CFM frames sent for the service.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.2.1.1.1 |
cienaCesCfmServiceStatsTotalRxThe total CFM frames received for the service.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.2.1.1.2 |
cienaCesCfmServiceStatsTotalTxLTMThe total number of linktrace messages transmitted for the CFM service.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.2.1.1.3 |
cienaCesCfmServiceStatsTotalTxLTRThe total number of linktrace replies transmitted for the CFM service.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.2.1.1.4 |
cienaCesCfmServiceStatsTotalRxLTMThe total number of link trace messages received for the CFM service.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.2.1.1.5 |
cienaCesCfmServiceStatsTotalRxLTRThe total number of linktrace replies received for the CFM service.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.2.1.1.6 |
cienaCesCfmServiceStatsTotalRxUnexpectedLTRThe total number of unexpected linktrace replies received for the CFM service.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.2.1.1.7 |
cienaCesCfmServiceStatsTotalTxLBMThe total number of loopback messages transmitted for the CFM service.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.2.1.1.8 |
cienaCesCfmServiceStatsTotalTxLBRThe total number of loopback replies transmitted for the CFM service.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.2.1.1.9 |
cienaCesCfmServiceStatsTotalRxLBMThe total number of loopback messages received for the CFM service.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.2.1.1.10 |
cienaCesCfmServiceStatsTotalRxInorderLBRThe total number of in-order loopback replies received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.2.1.1.11 |
cienaCesCfmServiceStatsTotalRxOutOforderLBRThe total number of out-of-order loopback replies received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.2.1.1.12 |
cienaCesCfmServiceStatsTotalRxContentMismatchLBRThe total number of content mismatched loopback replies received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.2.1.1.13 |
cienaCesCfmServiceStatsTotalRxUnexpectedLBRThe total number of unexpectecd loopback replies received.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.2.1.1.14 |
cienaCesCfmServiceStatsClearTo clear statistics for a given service, set this object to clear(1). During GET this object returns none(0)rw CienaStatsClear (CIENA-TC) .1.3.6.1.4.1.1271.2.3.4.1.2.1.1.15 |
cienaCesCfmMepStats OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.3.4.1.3 |
cienaCesCfmMepStatsTableThe (conceptual) table listing the configuration
parameters for the CFM MEP table. SEQUENCE OF CienaCesCfmMepStatsEntry .1.3.6.1.4.1.1271.2.3.4.1.3.1 |
cienaCesCfmMepStatsEntryAn entry (conceptual row) in the cienaCesCfmMepStatsTable. CienaCesCfmMepStatsEntry .1.3.6.1.4.1.1271.2.3.4.1.3.1.1 |
cienaCesCfmMepInterfaceTypeThis object is used as the index in the table and indicates
the MEP interface for the given service.ro CienaCesCfmInterfaceType .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.1 |
cienaCesCfmMepInterfaceIndexThis object is used as the index in the table and indicates
the MEP interface index for the given service.ro Unsigned32 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.2 |
cienaCesCfmMepStatsTxTotalCCMThe total number of CCM messages transmitted by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.3 |
cienaCesCfmMepStatsRxTotalCCMThe total number of CCM messages received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.4 |
cienaCesCfmMepStatsTxLoopbackMessagesThe total number of loopback messages transmitted by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.5 |
cienaCesCfmMepStatsTxLoopbackReplyThe total number of loopback replies transmitted by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.6 |
cienaCesCfmMepStatsRxLoopbackMessagesThe total number of loopback messages received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.7 |
cienaCesCfmMepStatsRxInorderLoopbackReplyThe total number of in-order loopback replies received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.8 |
cienaCesCfmMepStatsRxOutoforderLoopbackReplyThe total number of out-of-order loopback replies received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.9 |
cienaCesCfmMepStatsRxContentMismatchLoopbackReplyThe total number of content mismatched loopback replies received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.10 |
cienaCesCfmMepStatsRxUnexpectedLoopbackReplyThe total number of unexpected loopback replies received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.11 |
cienaCesCfmMepStatsTxLinktraceMessageThe total number of linktrace messages transmitted by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.12 |
cienaCesCfmMepStatsTxLinktraceReplyThe total number of linktrace replies transmitted by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.13 |
cienaCesCfmMepStatsRxLinktraceMessageThe total number of linktrace messages received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.14 |
cienaCesCfmMepStatsRxLinktraceReplyThe total number of linktrace replies received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.15 |
cienaCesCfmMepStatsRxUnexpectedLinktraceReplyThe total number of unexpected linktrace replies received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.16 |
cienaCesCfmMepStatsTxDelayMeasurementMessageThe total number of DMM messages transmitted by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.17 |
cienaCesCfmMepStatsTxDelayMeasurementReplyThe total number of DMM replies transmitted by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.18 |
cienaCesCfmMepStatsRxDelayMeasurementMessageThe total number of DMM messages received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.19 |
cienaCesCfmMepStatsRxDelayMeasurementReplyThe total number of DMM replies received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.20 |
cienaCesCfmMepStatsTxLossMeasurementMessageThe total number of LMM messages transmitted by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.21 |
cienaCesCfmMepStatsTxLossMeasurementReplyThe total number of LMM replies transmitted by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.22 |
cienaCesCfmMepStatsRxLossMeasurementMessageThe total number of LMM messages received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.23 |
cienaCesCfmMepStatsRxLossMeasurementReplyThe total number of LMM replies received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.24 |
cienaCesCfmMepStatsLastLBMTargetRemoteMepIdThis object indicates the remote MEP ID of the last loopback message.ro Unsigned32 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.25 |
cienaCesCfmMepStatsLastLBMTargetMacAddressThis object indicates the target MAC address for the last loopback message.ro CienaMacAddress (CIENA-TC) .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.26 |
cienaCesCfmMepStatsLastLBMPriorityThis object indicates the last loopback message priority.ro Unsigned32 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.27 |
cienaCesCfmMepStatsLastLBMCountThis object indicates the last loopback message count.ro Unsigned32 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.28 |
cienaCesCfmMepStatsLastLBMFirstSeqNumThis object indicates the last loopback message first sequence number.ro Unsigned32 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.29 |
cienaCesCfmMepStatsLastLTMTargetRemoteMepIdThis object indicates the last linktrace message target remote MEP ID.ro Unsigned32 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.30 |
cienaCesCfmMepStatsLastLTMTargetMacAddressThis object indicates the target MAC address of the the last linktrace message.ro CienaMacAddress (CIENA-TC) .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.31 |
cienaCesCfmMepStatsLastLTMPriorityThis object indicates the last linktrace message priority of the CFM MEP.ro Unsigned32 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.32 |
cienaCesCfmMepStatsLastLTMSeqNumThis object indicates the last linktrace message sequence number of the CFM MEP.ro Unsigned32 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.33 |
cienaCesCfmMepStatsLastLTMInitialTTLThis object indicates the last linktrace message initial TTL of the CFM MEP.ro Unsigned32 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.34 |
cienaCesCfmMepStatsLastDMMTargetRemoteMepIdThis object indicates the last DMM target remote MEP ID for the CFM MEP.ro Unsigned32 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.35 |
cienaCesCfmMepStatsLastDMMTargetMacAddressThis object indicates the last DMM target MAC address for the CFM MEP.ro CienaMacAddress (CIENA-TC) .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.36 |
cienaCesCfmMepStatsLastDMMPriorityThis object indicates the last DMM priority for the CFM MEP.ro Unsigned32 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.37 |
cienaCesCfmMepStatsLastDMMRepeatIntervalThis object indicates the last DMM repeat interval for the CFM MEP.ro Unsigned32 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.38 |
cienaCesCfmMepStatsLastDMMNumOfDmmToSendThis object indicates the number of DMMs to send for the last DMM for the CFM MEP.ro Unsigned32 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.39 |
cienaCesCfmMepStatsLastLMMTargetRemoteMepIdThis object indicates the last LMM target remote MEP ID for the CFM MEP.ro Unsigned32 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.40 |
cienaCesCfmMepStatsLastLMMTargetMacAddressThis object indicates the last LMM target MAC Address for the CFM MEP.ro CienaMacAddress (CIENA-TC) .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.41 |
cienaCesCfmMepStatsLastLMMPriorityThis object indicates the last LMM priority for the CFM MEP.ro Unsigned32 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.42 |
cienaCesCfmMepStatsLastLMMRepeatIntervalThis object indicates the last LMM repeat interval for the CFM MEP.ro Unsigned32 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.43 |
cienaCesCfmMepStatsLastLMMNumOfLmmToSendThis object indicates the number of LMMs to send for the last LMM for the CFM MEP.ro Unsigned32 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.44 |
cienaCesCfmMepStatsNextLBMSeqNumberThis object indicates the next LBM sequence number received on the given service and port.ro Counter32 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.45 |
cienaCesCfmMepStatsNextLTMSeqNumberThis object indicates the next LTM sequence number received on the given service and port.ro Counter32 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.46 |
cienaCesCfmMepStatsTxSyntheticLossMeasurementMessageThe total number of synthetic loss messages transmitted by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.47 |
cienaCesCfmMepStatsTxSyntheticLossMeasurementReplyThe total number of synthetic loss replies transmitted by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.48 |
cienaCesCfmMepStatsRxSyntheticLossMeasurementMessageThe total number of synthetic loss messages received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.49 |
cienaCesCfmMepStatsRxSyntheticLossMeasurementReplyThe total number of synthetic loss replies received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.50 |
cienaCesCfmMepStatsRxValidSyntheticLossMeasurementMessageThe total number valid of synthetic loss messages received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.51 |
cienaCesCfmMepStatsRxValidSyntheticLossMeasurementReplyThe total number valid of synthetic loss replies received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.52 |
cienaCesCfmMepStatsRxInvalidSyntheticLossMeasurementMessageThe total number invalid of synthetic loss messages received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.53 |
cienaCesCfmMepStatsRxInvalidSyntheticLossMeasurementReplyThe total number invalid of synthetic loss replies received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.54 |
cienaCesCfmMepStatsRxCCMWithErrorCCMFaultThe total number of CCMs with Error CCM fault received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.55 |
cienaCesCfmMepStatsRxCCMWithXCONFaultThe total number of CCMs with XCON fault received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.56 |
cienaCesCfmMepStatsRxCCMWithRMEPLOCFaultThe total number of CCMs with RMEP LOC fault received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.57 |
cienaCesCfmMepStatsRxCCMWithRDI0The total number of CCMs with RDI bit 0 received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.58 |
cienaCesCfmMepStatsRxCCMWithRDI1The total number of CCMs with RDI bit set received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.59 |
cienaCesCfmMepStatsRxCCMWithSequenceNumberMismatchThe total number of CCMs with sequence number mismatch received by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.60 |
cienaCesCfmMepStatsRxCCMDroppedWithMalformedTlvThe total number of CCMs received by the CFM MEP which were dropped because of malformed TLV.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.61 |
cienaCesCfmMepStatsToTxLoopbackMessagesThe total number of loopback messages left to be transmitted by the CFM MEP.ro Counter64 .1.3.6.1.4.1.1271.2.3.4.1.3.1.1.62 |
cienaCesCfmRemoteMepStatsTableThe (conceptual) table listing the configuration
parameters for the CFM remote MEP table. SEQUENCE OF CienaCesCfmRemoteMepStatsEntry .1.3.6.1.4.1.1271.2.3.4.1.3.2 |
cienaCesCfmRemoteMepStatsEntryAn entry (conceptual row) in the cienaCesCfmMepStatsTable. CienaCesCfmRemoteMepStatsEntry .1.3.6.1.4.1.1271.2.3.4.1.3.2.1 |
cienaCesCfmRemoteMepStatsRxTotalCCMThis object is used to show the number of MEP CCM frames received.ro Counter32 .1.3.6.1.4.1.1271.2.3.4.1.3.2.1.1 |
cienaCesCfmRemoteMepStatsLastSeqNumThis object is used to show the last sequence number.ro Unsigned32 .1.3.6.1.4.1.1271.2.3.4.1.3.2.1.2 |
cienaCesCfmRemoteMepStatsCCMSeqErrorsThis object is used to show the number of MEP CCM frames sequence errors.ro Unsigned32 .1.3.6.1.4.1.1271.2.3.4.1.3.2.1.3 |
cienaCesCfmRemoteMepStatsClearSetting this object to clear(1) resets the statistics for the remote MEP
for this service.rw CienaStatsClear (CIENA-TC) .1.3.6.1.4.1.1271.2.3.4.1.3.2.1.4 |
cienaCesCfmGlobalSLMDefaultIntervalThe global default interval for synthetic loss measurement tests.
The value ranges from 3 to 7.
The values 3-7 represent indices to CFM intervals as follows:
3
4
5
6
7
::= { cienaCesCfmGlobal 6 }
cienaCesCfmGlobalSLMDefaultTimeout OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTIONro Integer32 .cienaCesCfmServiceEntry.20 |
cienaCesCfmServiceNumCCMForFaultThis MIB object indicates the number of CCM frames that must go undelivered
for the PBB-TE tunnel before declaring the PBB-TE tunnel as operationally down.
This object is only applicable if cienaCesCfmServiceType is set to pbtTunnel, else this object
should be ignored.ro Unsigned32 .cienaCesCfmServiceEntry.21 |
cienaCesCfmServiceDMMIntervalThis MIB object indicates the DMM transmission interval index for the service specified by cienaCesCfmServiceType.
This determines the frequency at which DMMs are transmitted. The length of the interval increases exponentially
with the index value. The value ranges from 3 to 7. The values 3-7 represent indices to CFM intervals as follows:
3
4
5
6
7
::= { cienaCesCfmServiceEntry 22 }
cienaCesCfmServiceLMMInterval OBJECT-TYPE
SYNTAX INTEGER
MAX-ACCESS read-only
STATUS current
DESCRIPTIONro INTEGER .cienaCesCfmServiceEntry.23 |
cienaCesCfmServiceCCMLossStatsStateThis object indicates the operational state of CCM loss accounting
for RMEPs learned by this service type.ro CienaGlobalState (CIENA-TC) .cienaCesCfmServiceEntry.24 |
cienaCesCfmServiceCCMLossBucketIntervalThis object indicates the interval in minutes that each of the 96
CCM loss history buckets spans. The default is 15 minutes, which
means the default history covers 24 hours.ro INTEGER .cienaCesCfmServiceEntry.25 |
cienaCesCfmServiceY1731This object indicates whether Y.1731 is enabled for the service.ro TruthValue (SNMPv2-TC) .cienaCesCfmServiceEntry.26 |
cienaCesCfmServiceTlvSenderIdTypeThis MIB object indicates the sender ID TLV Type.ro Enumeration .cienaCesCfmServiceEntry.27 |
cienaCesCfmServiceRMEPHoldTimeThis MIB object indicates the remote MEP hold time in milliseconds.ro Unsigned32 UNITS "milliseconds" .cienaCesCfmServiceEntry.28 |
cienaCesCfmServiceCCMTxStateThis MIB object indicates the administrative state of the CCM Tx.ro CienaGlobalState (CIENA-TC) .cienaCesCfmServiceEntry.29 |
cienaCesCfmServicePortStatusFlagThis MIB object shows the port status defect flag.ro TruthValue (SNMPv2-TC) .cienaCesCfmServiceEntry.30 |
cienaCesCfmServiceRDIFlagThis MIB object shows the RDI defect flag.ro TruthValue (SNMPv2-TC) .cienaCesCfmServiceEntry.31 |
cienaCesCfmServiceInstabilityFlagThis MIB object shows the instability defect flag.ro TruthValue (SNMPv2-TC) .cienaCesCfmServiceEntry.32 |
cienaCesCfmServiceRMEPAgingControls automatic remote MEP aging for the service.ro TruthValue (SNMPv2-TC) .cienaCesCfmServiceEntry.33 |
cienaCesCfmServiceRMEPDiscoveryControls automatic remote MEP discovery for the service.ro TruthValue (SNMPv2-TC) .cienaCesCfmServiceEntry.34 |
cienaCesCfmServiceChargedAgainstGlobalBudgetThis MIB object reflects if this service is charged against
the global frame budget.ro TruthValue (SNMPv2-TC) .cienaCesCfmServiceEntry.35 |
cienaCesCfmServiceControlModuleFrameBudgetCFM frame budget for the control timing module for the given service.ro Counter32 UNITS "frames/sec" .cienaCesCfmServiceEntry.36 |
cienaCesCfmServiceMulticastDaThis object indicates if multicast DA mode is enabled for the service. This object is relevant
when the cienaCesCfmServiceType is PBT.ro TruthValue (SNMPv2-TC) .cienaCesCfmServiceEntry.37 |
cienaCesCfmServiceCCMRxStatsControls cfm rx debug stats for the service.ro TruthValue (SNMPv2-TC) .cienaCesCfmServiceEntry.38 |