CIENA-CES-MPLS-MIB
AI MIB Summary
The CIENA-CES-MPLS-MIB enables management of Multiprotocol Label Switching (MPLS) features and associated performance counters on Ciena LEOS-based Carrier Ethernet Services (CES) platforms. It provides visibility into MPLS session states, label bindings, and traffic statistics for provisioning and fault isolation within Ciena's transport network infrastructure.
This MIB module defines the mgmt objects for the MPLS feature for LEOS based Ciena products.
Main OID:
cienaCesMplsMIB.1.3.6.1.4.1.1271.2.1.18
873
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
873 total| Object Name |
|---|
cienaCesMplsMIBThis MIB module defines the mgmt objects for the MPLS
feature for LEOS based Ciena products. MODULE-IDENTITY .1.3.6.1.4.1.1271.2.1.18 |
cienaCesMplsMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.18.1 |
cienaCesMpls OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.18.1.1 |
cienaCesMplsGlobalAttrs OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.18.1.1.1 |
cienaCesMplsStaticAdminLabelRangeStartThe beginning of the static administrative label range. There cannot be any
overlap between static and dynamic label ranges.
Setting this object does not become effective until the device is rebooted.rodeprecated INTEGER ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.1.1.1 |
cienaCesMplsStaticAdminLabelRangeEndThe end of the static administrative label range. There cannot be any overlap between
static and dynamic label ranges.
Setting this object does not become effective until the device is rebooted.rodeprecated INTEGER ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.1.1.2 |
cienaCesMplsStaticOperLabelRangeStartThe beginning of the static operational label range. There cannot be any overlap between
static and dynamic label ranges.rodeprecated INTEGER ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.1.1.3 |
cienaCesMplsStaticOperLabelRangeEndThe end of the static operational label range. There cannot be any overlap between
static and dynamic label ranges.rodeprecated INTEGER ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.1.1.4 |
cienaCesMplsDynamicAdminLabelRangeStartThe beginning of the dynamic administrative label range. There cannot be any overlap between
static and dynamic label ranges.rodeprecated INTEGER ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.1.1.5 |
cienaCesMplsDynamicAdminLabelRangeEndThe end of the dynamic administrative label range. There cannot be any overlap between
static and dynamic label ranges.rodeprecated INTEGER ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.1.1.6 |
cienaCesMplsDynamicOperLabelRangeStartThe beginning of the dynamic operational label range. There cannot be any overlap between
static and dynamic label ranges.rodeprecated INTEGER ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.1.1.7 |
cienaCesMplsDynamicOperLabelRangeEndThe end of the dynamic operational label range. There cannot be any overlap between
static and dynamic label ranges.rodeprecated INTEGER ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.1.1.8 |
cienaCesMplsStaticIngressTunnelTableThe (conceptual) table listing the MPLS static encap tunnels. SEQUENCE OF CienaCesMplsStaticIngressTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.1.2 |
cienaCesMplsStaticIngressTunnelEntryThis represents an entry of the MPLS static encap tunnel table. CienaCesMplsStaticIngressTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.1.2.1 |
cienaCesMplsStaticIngressTunnelIndexUnique index in the table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.1 |
cienaCesMplsStaticIngressTunnelNameThis represents the encap tunnel name. Tunnel names are common across static and dynamic.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.2 |
cienaCesMplsStaticIngressTunnelWeightA parameter to select the order of precedence of encap tunnels
during tunnel switchover or reversion (if tunnel reversion is enabled).
A higher weight indicates higher preference during switchover or reversion.ro INTEGER .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.3 |
cienaCesMplsStaticIngressTunnelNextHopIpSpecifies the next hop IP address for the static encap tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.4 |
cienaCesMplsStaticIngressTunnelAdminStateSpecifies the administrative status of the static encap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.5 |
cienaCesMplsStaticIngressTunnelOperStateSpecifies the operational status of the static encap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.6 |
cienaCesMplsStaticIngressTunnelDestIpAddrDestination IP address of the static encap tunnel. If not specified, the static encap tunnel
inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel
entry is created.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.7 |
cienaCesMplsStaticIngressTunnelLabelThe label for the static encap tunnel.ro INTEGER ( 0..1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.8 |
cienaCesMplsStaticIngressTunnelFrmCosPolicyFrame CoS policy of the static encap tunnel.rodeprecated FCosPolicy .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.9 |
cienaCesMplsStaticIngressTunnelFrmCosMapIdThe frame CoS map ID of the static encap tunnel. This value is valid if the
frame CoS policy selected for the static encap tunnel is rcos-mapped. This value
corresponds to the index cienaCesTceDpTsCosMapFcosMapId of the
cienaCesTceDpTsCosMapFcosMapTable.rodeprecated INTEGER .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.10 |
cienaCesMplsStaticIngressTunnelFixedExpThis object is deprecated and the new object to provide this information is
cienaCesMplsStaticIngressTunnelFixedTC in this table.rodeprecated Unsigned32 (0..7 ) .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.11 |
cienaCesMplsStaticIngressTunnelTTLPolicySpecifies whether TTL is fixed or inherited from the frame.ro TTLPolicy .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.12 |
cienaCesMplsStaticIngressTunnelFixedTTLIf the TTL policy for the static encap tunnel is fixed, then this object is
the TTL value.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.13 |
cienaCesMplsStaticIngressTunnelGrpIndexThe group ID of the tunnel group of which the static encap tunnel is a member.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.14 |
cienaCesMplsStaticIngressTunnelReversionIndicates whether tunnel reversion is turned on/off for this encap tunnel.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.16 |
cienaCesMplsStaticIngressTunnelReversionTimeoutThis object represents the tunnel reversion hold time in seconds before
the primary encap tunnel switches back as active tunnel in its tunnel group.ro INTEGER .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.17 |
cienaCesMplsStaticIngressTunnelPrimaryTunnelNameThis object represents the primary tunnel it is protecting,
if this is a backup tunnel.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.18 |
cienaCesMplsStaticIngressTunnelFixedTCIf the frame CoS policy for the static encap tunnel is fixed, this value is used
for MPLS encapsulation.rodeprecated Unsigned32 (0..7 ) .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.19 |
cienaCesMplsStaticIngressTunnelProtectionRolespecifies the protection role of the static encap tunnelro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.20 |
cienaCesMplsStaticIngressTunnelProtectionStatespecifies the protection status of the static encap tunnelro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.21 |
cienaCesMplsStaticIngressTunnelProtectionPartnerNameThis object represents the primary tunnel it is protecting,
if this is a backup tunnel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.22 |
cienaCesMplsStaticIngressTunnelCosProfileIndexThis object represents Cos profile indexro INTEGER .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.23 |
cienaCesMplsStaticIngressTunnelCosProfileNameSpecifies the name of Cos profilero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.24 |
cienaCesMplsStaticIngressTunnelRecoveryDisjointSpecifies the type of Recovery Disjointro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.1.2.1.25 |
cienaCesMplsDynamicIngressTunnelTableThe (conceptual) table listing the MPLS encap tunnels. SEQUENCE OF CienaCesMplsDynamicIngressTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.1.3 |
cienaCesMplsDynamicIngressTunnelEntryAn entry in the dynamic encap tunnel table. CienaCesMplsDynamicIngressTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.1.3.1 |
cienaCesMplsDynamicIngressTunnelIndexThis represents the unique index in the table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.1 |
cienaCesMplsDynamicIngressTunnelNameThis represents the dynamic encap tunnel name.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.2 |
cienaCesMplsDynamicIngressTunnelWeightA parameter to select the order of precedence of encap tunnels
during tunnel switchover or reversion (if tunnel reversion is enabled).
A higher weight indicates higher preference during switchover or reversion.ro INTEGER .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.3 |
cienaCesMplsDynamicIngressTunnelLspIdA unique index within a tunnel group.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.4 |
cienaCesMplsDynamicIngressTunnelNextHopIpSpecifies the next hop IP address for the dynamic encap tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.5 |
cienaCesMplsDynamicIngressTunnelAdminStateSpecifies the administrative status of the dynamic encap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.6 |
cienaCesMplsDynamicIngressTunnelOperStateSpecifies the operational status of the dynamic encap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.7 |
cienaCesMplsDynamicIngressTunnelDestIpAddrDestination IP address of the dynamic encap tunnel. If not specified, the dynamic encap tunnel
inherits the IP address of the tunnel group. This object cannot be modified once the
dynamic encap tunnel entry is created.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.8 |
cienaCesMplsDynamicIngressTunnelLabelLabel for the dynamic encap tunnel.ro INTEGER (-1..1048575) .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.9 |
cienaCesMplsDynamicIngressTunnelFrmCosPolicyFrame CoS policy of the dynamic encap tunnel.rodeprecated Enumeration .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.10 |
cienaCesMplsDynamicIngressTunnelFrmCosMapIdThe frame CoS map ID of the dynamic encap tunnel. This value is valid if the
frame CoS policy selected for the dynamic encap tunnel is rcos-mapped. This value
corresponds to the index cienaCesTceDpTsCosMapFcosMapId of the
cienaCesTceDpTsCosMapFcosMapTable.rodeprecated INTEGER .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.11 |
cienaCesMplsDynamicIngressTunnelFixedExpThis object is deprecated and the new object to provide this information is
cienaCesMplsDynamicIngressTunnelFixedTC in this table.rodeprecated Unsigned32 (0..7 ) .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.12 |
cienaCesMplsDynamicIngressTunnelSetupPriorityIndicates the set up priority of the dynamic encap tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.13 |
cienaCesMplsDynamicIngressTunnelHoldPriorityIndicates the holding priority of the dynamic encap tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.14 |
cienaCesMplsDynamicIngressTunnelRecordRouteIndicates whether or not an FRR (fast re-route) tunnel needs to be created for this dynamic encap tunnel.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.15 |
cienaCesMplsDynamicIngressTunnelFastRouteIndicates the fast route method for the dynamic encap tunnel. This object cannot be modified once the
dynamic encap tunnel entry is created.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.16 |
cienaCesMplsDynamicIngressTunnelTTLPolicySpecifies whether TTL is fixed or inherited from the frame.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.17 |
cienaCesMplsDynamicIngressTunnelFixedTTLIf the TTL policy for the dynamic encap tunnel is fixed, this object is
the TTL value.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.18 |
cienaCesMplsDynamicIngressTunnelPathIndexIndex into the cienaCesmplsTunnelPathTable entry that
specifies the explicit route hops for this dynamic encap tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.19 |
cienaCesMplsDynamicIngressTunnelPathNameThe path name corresponding to the pathIndex object.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.20 |
cienaCesMplsDynamicIngressTunnelGrpIndexThe group id of the tunnel group of which the dynamic encap tunnel is a member.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.21 |
cienaCesMplsDynamicIngressTunnelResourcePointerThe OID must be one of the entries in mplsTunnelResourceTable.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.23 |
cienaCesMplsDynamicIngressTunnelReversionIndicates whether tunnel reversion is turned on/off for this encap tunnel.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.24 |
cienaCesMplsDynamicIngressTunnelReversionTimeoutThis object represents the tunnel reversion hold time in seconds before
the primary encap tunnel switches back as active tunnel in its tunnel group.ro INTEGER .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.25 |
cienaCesMplsDynamicIngressTunnelBandwidthProfileThis object represents the bandwidth profile attached to this tunnel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.26 |
cienaCesMplsDynamicIngressTunnelPrimaryTunnelNameThis object represents the primary tunnel it is protecting,
if this is a backup tunnel.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.27 |
cienaCesMplsDynamicIngressTunnelFixedTCIf the frame CoS policy for the dynamic encap tunnel is fixed, this value is used
for MPLS encapsulation.rodeprecated Unsigned32 (0..7 ) .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.28 |
cienaCesMplsDynamicIngressTunnelProtectionRolespecifies the protection role of the static encap tunnelro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.29 |
cienaCesMplsDynamicIngressTunnelProtectionStatespecifies the protection status of the static encap tunnelro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.30 |
cienaCesMplsDynamicIngressTunnelProtectionPartnerNameThis object represents the primary tunnel it is protecting,
if this is a backup tunnel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.31 |
cienaCesMplsDynamicIngressTunnelCosProfileIndexThis object represents Cos profile indexro INTEGER .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.32 |
cienaCesMplsDynamicIngressTunnelCosProfileNameSpecifies the name of Cos profilero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.3.1.33 |
cienaCesMplsStaticEgressTunnelTableThe (conceptual) table listing the MPLS decap tunnels. SEQUENCE OF CienaCesMplsStaticEgressTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.1.4 |
cienaCesMplsStaticEgressTunnelEntryAn entry in the static decap tunnel table. CienaCesMplsStaticEgressTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.1.4.1 |
cienaCesMplsStaticEgressTunnelIndexThis represents the unique index in the table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.4.1.1 |
cienaCesMplsStaticEgressTunnelNameThis represents the decap tunnel name.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.1.4.1.2 |
cienaCesMplsStaticEgressTunnelAdminStateAdministrative status of the static decap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.4.1.3 |
cienaCesMplsStaticEgressTunnelOperStateIndicates the operational status of the static decap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.4.1.4 |
cienaCesMplsStaticEgressTunnelSourceIpAddrSource IP address of the static decap tunnel. This object cannot be modified once the static decap
tunnel entry is created.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.1.4.1.5 |
cienaCesMplsStaticEgressTunnelLabelIndicates the label of the static decap tunnel.ro Unsigned32 (0.. 1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.1.4.1.6 |
cienaCesMplsDynamicEgressTunnelTableThe (conceptual) table listing the MPLS dynamic decap tunnels. SEQUENCE OF CienaCesMplsDynamicEgressTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.1.5 |
cienaCesMplsDynamicEgressTunnelEntryAn entry in the dynamic decap tunnel table. CienaCesMplsDynamicEgressTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.1.5.1 |
cienaCesMplsDynamicEgressTunnelIndexThis represents the unique index in the table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.5.1.1 |
cienaCesMplsDynamicEgressTunnelNameThis represents the dynamic decap tunnel name.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.1.5.1.2 |
cienaCesMplsDynamicEgressTunnelAdminStateIndicates the administrative status of the dynamic decap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.5.1.3 |
cienaCesMplsDynamicEgressTunnelOperStateIndicates the operational status of the dynamic decap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.5.1.4 |
cienaCesMplsDynamicEgressTunnelInstanceIndicates the LSP ID.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.5.1.5 |
cienaCesMplsDynamicEgressTunnelSourceIpAddrSource IP address of the dynamic decap tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.1.5.1.6 |
cienaCesMplsDynamicEgressTunnelDestIpAddrDestination IP address of the dynamic decap tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.1.5.1.7 |
cienaCesMplsDynamicEgressTunnelLabelIdicates the label of the dynamic decap tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.5.1.8 |
cienaCesMplsStaticTransitTunnelTableThe (conceptual) table listing the MPLS static transit tunnels. SEQUENCE OF CienaCesMplsStaticTransitTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.1.6 |
cienaCesMplsStaticTransitTunnelEntryAn entry in the static transit tunnel table. CienaCesMplsStaticTransitTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.1.6.1 |
cienaCesMplsStaticTransitTunnelIndexThis represents the unique index in the table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.6.1.1 |
cienaCesMplsStaticTransitTunnelNameThis represents the static transit tunnel name.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.1.6.1.2 |
cienaCesMplsStaticTransitTunnelAdminStateIndicates the administrative status of the static transit tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.6.1.3 |
cienaCesMplsStaticTransitTunnelOperStateIndicates the operational status of the static transit tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.6.1.4 |
cienaCesMplsStaticTransitTunnelNextHopIpAddrNext hop IP address of the static transit tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.1.6.1.5 |
cienaCesMplsStaticTransitTunnelInLabelIndicates the incoming label of the static transit tunnel.ro INTEGER ( 0..1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.1.6.1.6 |
cienaCesMplsStaticTransitTunnelOutLabelIndicates the outgoing label of the static transit tunnel.ro INTEGER ( 0..1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.1.6.1.7 |
cienaCesMplsStaticTransitTunnelFcosPolicyFrame CoS policy of the static transit tunnel.rodeprecated FCosPolicy .1.3.6.1.4.1.1271.2.1.18.1.1.6.1.8 |
cienaCesMplsStaticTransitTunnelFixedTcIf frame CoS policy for the static transit tunnel is fixed, this value is used
for MPLS encapsulation.rodeprecated Unsigned32 (0..7 ) .1.3.6.1.4.1.1271.2.1.18.1.1.6.1.9 |
cienaCesMplsStaticTransitTunnelFrmCosMapIdThe frame CoS map ID of the static transit tunnel. This value is valid if the
frame cos policy selected for the static transit tunnel is rcos-mapped.rodeprecated INTEGER .1.3.6.1.4.1.1271.2.1.18.1.1.6.1.10 |
cienaCesMplsStaticTransitTunnelTTLPolicySpecifies whether TTL is fixed or inherited from the frame.ro TTLPolicy .1.3.6.1.4.1.1271.2.1.18.1.1.6.1.11 |
cienaCesMplsStaticTransitTunnelFixedTTLIf the TTL policy for the static transit tunnel is fixed, then this object is
the TTL value.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.6.1.12 |
cienaCesMplsStaticTransitTunnelRcosPolicyResolved CoS policy of the static transit tunnel.rodeprecated FCosPolicy .1.3.6.1.4.1.1271.2.1.18.1.1.6.1.13 |
cienaCesMplsStaticTransitTunnelRCosMapIdThe resolved CoS map ID of the static transit tunnel. This value is valid if the
resolved CoS policy selected for the static transit tunnel is rcos-mapped.rodeprecated INTEGER .1.3.6.1.4.1.1271.2.1.18.1.1.6.1.14 |
cienaCesMplsStaticTransitTunnelCosProfileIndexThis object represents Cos profile indexro INTEGER .1.3.6.1.4.1.1271.2.1.18.1.1.6.1.15 |
cienaCesMplsStaticTransitTunnelCosProfileNameSpecifies the name of Cos profilero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.6.1.16 |
cienaCesMplsStaticTransitTunnelSourceIpAddrSource IP address of the static transit tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.1.6.1.17 |
cienaCesMplsStaticTransitTunnelDestIpAddrDestination IP address of the static transit tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.1.6.1.18 |
cienaCesMplsStaticTransitTunnelIncomingPacketsThe number of incoming packets for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.6.1.19 |
cienaCesMplsStaticTransitTunnelOutgoingPacketsThe number of outgoing packets for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.6.1.20 |
cienaCesMplsStaticTransitTunnelIncomingBytesThe number of incoming bytes for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.6.1.21 |
cienaCesMplsStaticTransitTunnelOutgoingBytesThe number of outgoing bytes for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.6.1.22 |
cienaCesMplsDynamicTransitTunnelTableThe (conceptual) table listing the MPLS dynamic transit tunnels. SEQUENCE OF CienaCesMplsDynamicTransitTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.1.7 |
cienaCesMplsDynamicTransitTunnelEntryAn entry in the dynamic transit tunnel table. CienaCesMplsDynamicTransitTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.1.7.1 |
cienaCesMplsDynamicTransitTunnelIndexThis represents the unique index in the table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.7.1.1 |
cienaCesMplsDynamicTransitTunnelNameThis represents the dynamic transit tunnel name.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.1.7.1.2 |
cienaCesMplsDynamicTransitTunnelAdminStateIndicates the administrative status of the dynamic transit tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.7.1.3 |
cienaCesMplsDynamicTransitTunnelOperStateIndicates the operational status of the dynamic transit tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.7.1.4 |
cienaCesMplsDynamicTransitTunnelInLabelIndicates the incoming label of the dynamic transit tunnel.ro INTEGER ( 0..1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.1.7.1.5 |
cienaCesMplsDynamicTransitTunnelOutLabelIndicates the outgoing label of the dynamic transit tunnel.ro INTEGER ( 0..1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.1.7.1.6 |
cienaCesMplsDynamicTransitTunnelNextHopIpAddrNext hop IP address of the Dynamic transit tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.1.7.1.7 |
cienaCesMplsDynamicTransitTunnelSourceIpAddrSource IP address of the static transit tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.1.7.1.8 |
cienaCesMplsDynamicTransitTunnelDestIpAddrDestination IP address of the static transit tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.1.7.1.9 |
cienaCesMplsDynamicTransitTunnelIncomingPacketsThe number of incoming packets for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.7.1.10 |
cienaCesMplsDynamicTransitTunnelOutgoingPacketsThe number of outgoing packets for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.7.1.11 |
cienaCesMplsDynamicTransitTunnelIncomingBytesThe number of incoming bytes for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.7.1.12 |
cienaCesMplsDynamicTransitTunnelOutgoingBytesThe number of outgoing bytes for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.7.1.13 |
cienaCesMplsTunnelPath OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.18.1.1.8 |
cienaCesMplsTunnelPathTableThe (conceptual) table listing the MPLS tunnel paths.
To create an entry in the tunnel path table,
cienaCesMplsTunnelPathName and cienaCesMplsTunnelPathRowStatus
must both be specified. SEQUENCE OF CienaCesMplsTunnelPathEntry .1.3.6.1.4.1.1271.2.1.18.1.1.8.1 |
cienaCesMplsTunnelPathEntryAn entry in the tunnel path table. CienaCesMplsTunnelPathEntry .1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1 |
cienaCesMplsTunnelPathIndexA unique index in the path entry table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1.1 |
cienaCesMplsTunnelPathNameName associated with the path.ro DisplayString (SIZE ( 1..31) ) .1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1.2 |
cienaCesMplsTunnelPathUseCountIndicates the number of encap tunnels that are using this path.ro Counter32 .1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1.3 |
cienaCesMplsTunnelPathHopTableThe (conceptual) table listing the MPLS tunnel path hop.
To create an entry in the path-hop table, cienaCesMplsTunnelPathHopIpAddr
and cienaCesMplsTunnelPathHopRowStatus must both be specified. SEQUENCE OF CienaCesMplsTunnelPathHopEntry .1.3.6.1.4.1.1271.2.1.18.1.1.8.2 |
cienaCesMplsTunnelPathHopEntryA tunnel hop entry. CienaCesMplsTunnelPathHopEntry .1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1 |
cienaCesMplsTunnelPathHopIndexUnique index in the path hop table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1.1 |
cienaCesMplsTunnelPathHopIpAddrIP address associated with this hop. This object cannot be modified once the path hop is created.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1.2 |
cienaCesMplsTunnelPathHopTypeIndidcates the hop type of the path member. This object cannot be modified once the path hop is created.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1.3 |
cienaCesMplsEncapTunnelNotif OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.18.1.1.9 |
cienaCesMplsNotifEncapTunnelTableTable of notification objects required for encap tunnel notification. SEQUENCE OF CienaCesMplsNotifEncapTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.1.9.1 |
cienaCesMplsNotifEncapTunnelEntryAn entry (conceptual row) in the cienaCesMplsNotifEncapTunnelTable.
No Get, GetNext or Set is allowed on this table. CienaCesMplsNotifEncapTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1 |
cienaCesMplsNotifEncapTunnelIndexTunnel index of the encap tunnel associated with the
notification.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.1 |
cienaCesMplsNotifEncapTunnelTypeEncap tunnel type of the encap tunnel associated with the
notification.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.2 |
cienaCesMplsNotifEncapTunnelNameThis represents the encap tunnel name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.3 |
cienaCesMplsNotifEncapTunnelAdminStateAdministrative state of the encap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.4 |
cienaCesMplsNotifEncapTunnelOperStateOperational state of the encap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.5 |
cienaCesMplsNotifEncapTunnelOamFaultedIndication if the tunnel has Oam fault.ro TunnelOamFault .1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.6 |
cienaCesMplsNotifEncapTunnelFaultedNodeIdIP address of the node with the AIS fault.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.7 |
cienaCesMplsTransitTunnelNotif OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.18.1.1.10 |
cienaCesMplsNotifTransitTunnelTableTable of notification objects required for transit tunnel notification. SEQUENCE OF CienaCesMplsNotifTransitTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.1.10.1 |
cienaCesMplsNotifTransitTunnelEntryAn entry (conceptual row) in the cienaCesMplsNotifTransitTunnelTable.
No Get, GetNext or Set is allowed on this table. CienaCesMplsNotifTransitTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1 |
cienaCesMplsNotifTransitTunnelIndexTunnel index of the transit tunnel associated with the
notification.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.1 |
cienaCesMplsNotifTransitTunnelTypeTransit tunnel type of the transit tunnel associated with the
notification.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.2 |
cienaCesMplsNotifTransitTunnelNameThis represents the transit tunnel name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.3 |
cienaCesMplsNotifTransitTunnelAdminStateAdministrative state of the transit tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.4 |
cienaCesMplsNotifTransitTunnelOperStateOperational state of the transit tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.5 |
cienaCesMplsNotifTransitTunnelOamFaultedIndication if the tunnel has Oam fault.ro TunnelOamFault .1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.6 |
cienaCesMplsEncapTunnelGrpNotif OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.18.1.1.11 |
cienaCesMplsNotifEncapTunnelGrpTableTable of notification objects required for encap tunnel group notification. SEQUENCE OF CienaCesMplsNotifEncapTunnelGrpEntry .1.3.6.1.4.1.1271.2.1.18.1.1.11.1 |
cienaCesMplsNotifEncapTunnelGrpEntryAn entry (conceptual row) in the cienaCesMplsNotifEncapTunnelGrpTable.
No Get, GetNext or Set is allowed on this table. CienaCesMplsNotifEncapTunnelGrpEntry .1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1 |
cienaCesMplsNotifEncapTunnelGrpIndexTunnel group index of the encap tunnel associated with the
notification.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.1 |
cienaCesMplsNotifEncapTunnelGrpNameTunnel group name of the encap tunnel associated with the
notification.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.2 |
cienaCesMplsNotifEncapTunnelGrpActiveEncapTunlIndexActive Encap Tunnel index of the tunnel group associated with the
notification.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.3 |
cienaCesMplsNotifEncapTunnelGrpActiveEncapTunlNameActive Encap Tunnel name of the Tunnel group associated with the
notification.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.4 |
cienaCesMplsNotifEncapTunnelGrpActiveEncapTunlTypeEncap tunnel type of the encap tunnel associated with the
notification.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.5 |
cienaCesMplsAssociatedTunnelTableThe table listing the MPLS Associated tunnels. SEQUENCE OF CienaCesMplsAssociatedTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.1.12 |
cienaCesMplsAssociatedTunnelEntryThis represents an entry of the MPLS associated tunnel table. CienaCesMplsAssociatedTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.1.12.1 |
cienaCesMplsAssociatedTunnelIndexUnique index in the table. Specifies mpls associated tunnel index Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.12.1.1 |
cienaCesMplsAssociatedTunnelNamespecifies mpls associated tunnel name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.12.1.2 |
cienaCesMplsAssociatedForwardTunnelNamespecifies associated forward tunnel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.12.1.3 |
cienaCesMplsAssociatedForwardTunnelTypespecifies associated forward tunnel type.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.12.1.4 |
cienaCesMplsAssociatedReverseTunnelNamespecifies associated reverse tunnel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.12.1.5 |
cienaCesMplsAssociatedReverseTunnelTypespecifies associated reverse tunnel type.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.12.1.6 |
cienaCesMplsAssociatedForwardTunnelDestIpAddrspecifies associated mpls forward tunnel destination IP addressro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.1.12.1.7 |
cienaCesMplsAssociatedDynamicTunnelSrcIpAddrspecifies associated mpls reverse tunnel source IP address.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.1.12.1.8 |
cienaCesMplsAssociatedTunnelAdminStateAdministrative status of associated tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.12.1.9 |
cienaCesMplsAssociatedTunnelOperStateOperational status of associated tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.12.1.10 |
cienaCesMplsAssociatedForwardTunnelOperStateOperational status of associated forward tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.12.1.11 |
cienaCesMplsAssociatedReverseTunnelOperStateOperational status of associated reverse tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.12.1.12 |
cienaCesMplsAssociatedProtectionRolespecifies the protection role of the associated tunnelro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.1.12.1.13 |
cienaCesMplsAssociatedProtectionStatespecifies the protection status of the associated tunnelro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.1.12.1.14 |
cienaCesMplsAssociatedTunnelProtectionPartnerNameThis object represents the tunnel name it is protectingro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.12.1.15 |
cienaCesMplsAssociatedBfdMonitoringSpecifies status of BFD monitoring.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.12.1.16 |
cienaCesMplsAssociatedBfdProfileNameThis object represent BFD profile name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.12.1.17 |
cienaCesMplsAssociatedBfdSessionNameSpecifies BFD session name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.12.1.18 |
cienaCesMplsAssociatedBfdSessionFaultedIndicates if BFD is faulted.ro INTEGER .1.3.6.1.4.1.1271.2.1.18.1.1.12.1.19 |
cienaCesMplsAssociatedBfdProfileIndexThis represents the BFD profile index in the BFD profile table configured
for this associated tunnelro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.12.1.20 |
cienaCesMplsTunnelARHopTableThe mplsTunnelARHopTable is used to indicate the
hops for an MPLS tunnel defined in mplsTunnelTable,
as reported by the MPLS signalling protocol. Thus at
a transit LSR, this table (if the table is supported
and if the signaling protocol is recording actual
route information) contains the actual route of the
whole tunnel. If the signaling protocol is not
recording the actual route, this table MAY report
the information from the mplsTunnelHopTable or the
mplsTunnelCHopTable.
Each row in this table is indexed by
mplsTunnelARHopListIndex. Each row also has a
secondary index mplsTunnelARHopIndex, corresponding
to the next hop that this row corresponds to.
Please note that since the information necessary to
build entries within this table is not provided by
some MPLS signalling protocols, implementation of
this table is optional. Furthermore, since the
information in this table is actually provided by
the MPLS signalling protocol after the path has
been set-up, the entries in this table are provided
only for observation, and hence, all variables in
this table are accessible exclusively as read-
only.
Note also that the contencts of this table may change
while it is being read because of re-routing
activities. A network administrator may verify that
the actual route read is consistent by reference to
the mplsTunnelLastPathChange object. SEQUENCE OF CienaCesMplsTunnelARHopEntry .1.3.6.1.4.1.1271.2.1.18.1.1.13 |
cienaCesMplsTunnelARHopEntryAn entry in this table represents a tunnel hop. An
entry is created by the agent for signaled ERLSP
set up by an MPLS signalling protocol. CienaCesMplsTunnelARHopEntry .1.3.6.1.4.1.1271.2.1.18.1.1.13.1 |
cienaMplsTunnelARHopListIndexPrimary index into this table identifying a
particular recorded hop list. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.13.1.1 |
cienaMplsTunnelARHopIndexSecondary index into this table identifying the
particular hop. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.13.1.2 |
cienaMplsTunnelARHopAddrTypeThe Hop Address Type of this tunnel hop.
Note that lspid(5) is a valid option only
for tunnels signaled via CRLDP.ro INTEGER .1.3.6.1.4.1.1271.2.1.18.1.1.13.1.3 |
cienaMplsTunnelARHopIpAddrThe Tunnel Hop Address for this tunnel hop.
The type of this address is determined by the
value of the corresponding mplsTunnelARHopAddrType.
If mplsTunnelARHopAddrType is set to unnum(4),
then this value contains the LSR Router ID of the
unnumbered interface. Otherwise the agent SHOULD
set this object to the zero-length string and the
manager should ignore this object.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.1.13.1.4 |
cienaMplsTunnelARHopAddrUnnumIf mplsTunnelARHopAddrType is set to unnum(4), then
this value will contain the interface identifier of
the unnumbered interface for this hop. This object
should be used in conjunction with
mplsTunnelARHopIpAddr which would contain the LSR
Router ID in this case. Otherwise the agent should
set this object to zero-length string and the
manager should ignore this.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.13.1.5 |
cienaMplsTunnelARHopLspIdIf mplsTunnelARHopAddrType is set to lspid(5), then
this value will contain the LSP ID of this hop.
This object is otherwise insignificant and should
contain a value of 0 to indicate this fact.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.13.1.6 |
cienaCesMplsAssociatedTunnelNotif OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.18.1.1.14 |
cienaCesMplsNotifAssociatedTunnelTableTable of notification objects required for associated tunnel
notification. SEQUENCE OF CienaCesMplsNotifAssociatedTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.1.14.1 |
cienaCesMplsNotifAssociatedTunnelEntryAn entry (conceptual row) in the cienaCesMplsNotifAssociatedTunnelTable.
No Get, GetNext or Set is allowed on this table. CienaCesMplsNotifAssociatedTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1 |
cienaCesMplsNotifAssociatedTunnelIndexTunnel index of the associated tunnel associated with the
notification.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.1 |
cienaCesMplsNotifAssociatedTunnelTypeAssociated tunnel type of the associated tunnel associated with the
notification.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.2 |
cienaCesMplsNotifAssociatedTunnelNameThis represents the associated tunnel name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.3 |
cienaCesMplsNotifAssociatedTunnelAdminStateAdministrative state of the associated tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.4 |
cienaCesMplsNotifAssociatedTunnelOperStateOperational state of the associated tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.5 |
cienaCesMplsNotifAssociatedTunnelOamFaultedIndication if the tunnel has Oam fault.ro TunnelOamFault .1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.6 |
cienaCesMplsNotifAssociatedTunnelFaultedNodeIdIP address of the node with the AIS fault.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.7 |
cienaCesMplsCacInterfaceNotif OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.18.1.1.15 |
cienaCesMplsNotifCacInterfaceTableTable of notification objects required for CAC interface notification. SEQUENCE OF CienaCesMplsNotifCacInterfaceEntry .1.3.6.1.4.1.1271.2.1.18.1.1.15.1 |
cienaCesMplsNotifCacInterfaceEntryAn entry (conceptual row) in the cienaCesMplsNotifCACInterfaceTable.
No Get, GetNext or Set is allowed on this table. CienaCesMplsNotifCacInterfaceEntry .1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1 |
cienaCesMplsNotifCacInterfaceIndexCAC entry index associated with the
notification.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1.1 |
cienaCesMplsNotifCacInterfaceClassTypeCAC class type value of the associated interface associated with the
notification.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1.2 |
cienaCesMplsNotifCacInterfaceNameThis represents the associated interface name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1.3 |
cienaCesMplsNotifCacInterfaceThresholdAlarm threshold value of the associated interface associated with the
notification.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1.4 |
cienaCesMplsClassProfileTableThe (conceptual) table listing the MPLS Class Profiles. SEQUENCE OF CienaCesMplsClassProfileEntry .1.3.6.1.4.1.1271.2.1.18.1.1.16 |
cienaCesMplsClassProfileEntryThis represents an entry for MPLS Class Profile. CienaCesMplsClassProfileEntry .1.3.6.1.4.1.1271.2.1.18.1.1.16.1 |
cienaCesMplsClassProfileIndexThis represents the unique index for MPLS Class Profile. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.16.1.1 |
cienaCesMplsClassProfileNameThis represents the MPLS Class Profile name.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.1.16.1.2 |
cienaCesMplsClassProfileCacPolicyMPLS Class Profile Cac policy.ro CacPolicy .1.3.6.1.4.1.1271.2.1.18.1.1.16.1.3 |
cienaCesMplsTEClassTypeTableThe (conceptual) table listing the MPLS Class Types. SEQUENCE OF CienaCesMplsTEClassTypeEntry .1.3.6.1.4.1.1271.2.1.18.1.1.17 |
cienaCesMplsTEClassTypeEntryThis represents an entry for MPLS Class Type. CienaCesMplsTEClassTypeEntry .1.3.6.1.4.1.1271.2.1.18.1.1.17.1 |
cienaCesMplsClassTypeIndicates the MPLS Class Type value. Used as an Index in combination with MPLS Class Profile Index. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.17.1.1 |
cienaCesMplsClassTypeQueueGroupIndexIndicates the queue group index associated with MPLS Class Type.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.17.1.2 |
cienaCesMplsClassTypeQueueGroupInstanceIndicates the instance for MPLS Class Type mapped to a particular
queue group.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.17.1.3 |
cienaCesMplsClassTypeLomIndicates the link multiplier value for the MPLS Class Type.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.17.1.4 |
cienaCesMplsClassTypeAlarmThresholdIndicates the Alarm Threshold percentage (%) for MPLS Class Type.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.1.17.1.5 |
cienaCesGmpls OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.18.1.2 |
cienaCesGmplsStaticIngressUniDirTunnelTableThe (conceptual) table listing the MPLS static encap tunnels. SEQUENCE OF CienaCesGmplsStaticIngressUniDirTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.1 |
cienaCesGmplsStaticIngressUniDirTunnelEntryThis represents an entry of the MPLS static encap TP unidirectional tunnel table. CienaCesGmplsStaticIngressUniDirTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.1.1 |
cienaCesGmplsStaticIngressUniDirTunnelIndexUnique index in the table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.1.1.1 |
cienaCesGmplsStaticIngressUniDirTunnelNameThis represents the encap tunnel name. Tunnel names are common across static and dynamic.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.2.1.1.2 |
cienaCesGmplsStaticIngressUniDirTunnelNextHopIpSpecifies the next hop IP address for the static encap tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.1.1.3 |
cienaCesGmplsStaticIngressUniDirTunnelSrcIpAddrSource IP address of the static encap tunnel. If not specified, the static encap tunnel
inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel
entry is created.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.1.1.4 |
cienaCesGmplsStaticIngressUniDirTunnelDestIpAddrDestination IP address of the static encap tunnel. If not specified, the static encap tunnel
inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel
entry is created.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.1.1.5 |
cienaCesGmplsStaticIngressUniDirTunnelAdminStateSpecifies the administrative status of the static encap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.1.1.6 |
cienaCesGmplsStaticIngressUniDirTunnelOperStateSpecifies the operational status of the static encap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.1.1.7 |
cienaCesGmplsStaticIngressUniDirTunnelForwardOutLabelThe label for the static encap tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.1.1.8 |
cienaCesGmplsStaticIngressUniDirTunnelProtectionRoleThe label for the static encap tunnel.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.1.1.9 |
cienaCesGmplsStaticIngressUniDirTunnelProtectionPartnerNameProtection partner name of the static encap tunnel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.1.1.10 |
cienaCesGmplsStaticIngressUniDirTunnelProtectionStateSpecifies the Protection status of the static encap tunnel.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.1.1.11 |
cienaCesGmplsStaticIngressUniDirTunnelTTLPolicySpecifies whether TTL is fixed or inherited from the frame.ro TTLPolicy .1.3.6.1.4.1.1271.2.1.18.1.2.1.1.12 |
cienaCesGmplsStaticIngressUniDirTunnelFixedTTLIf the TTL policy for the static encap tunnel is fixed, then this object is
the TTL value.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.1.1.13 |
cienaCesGmplsStaticIngressUniDirTunnelGrpIndexThe group ID of the tunnel group of which the static encap tunnel is a member.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.1.1.14 |
cienaCesGmplsStaticIngressUniDirTunnelReversionIndicates whether tunnel reversion is turned on/off for this encap tunnel.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.1.1.15 |
cienaCesGmplsStaticIngressUniDirTunnelReversionTimeoutThis object represents the tunnel reversion hold time in seconds before
the primary encap tunnel switches back as active tunnel in its tunnel group.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.1.1.16 |
cienaCesGmplsStaticIngressUniDirTunnelCosProfileIndexThis object represents Cos profile indexro INTEGER .1.3.6.1.4.1.1271.2.1.18.1.2.1.1.17 |
cienaCesGmplsStaticIngressUniDirTunnelCosProfileNameSpecifies the name of Cos profilero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.1.1.18 |
cienaCesGmplsStaticIngressUniDirTunnelRecoveryDisjointSpecifies the type of Recovery Disjointro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.1.1.19 |
cienaCesGmplsStaticIngressCoroutedTunnelTableThe (conceptual) table listing the MPLS static encap tunnels. SEQUENCE OF CienaCesGmplsStaticIngressCoroutedTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.2 |
cienaCesGmplsStaticIngressCoroutedTunnelEntryThis represents an entry of the MPLS static encap tunnel table. CienaCesGmplsStaticIngressCoroutedTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.2.1 |
cienaCesGmplsStaticIngressCoroutedTunnelIndexUnique index in the table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.1 |
cienaCesGmplsStaticIngressCoroutedTunnelNameThis represents the encap tunnel name. Tunnel names are common across static and dynamic.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.2 |
cienaCesGmplsStaticIngressCoroutedTunnelNextHopIpSpecifies the next hop IP address for the static encap tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.3 |
cienaCesGmplsStaticIngressCoroutedTunnelSrcIpAddrSource IP address of the static encap tunnel. If not specified, the static encap tunnel
inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel
entry is created.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.4 |
cienaCesGmplsStaticIngressCoroutedTunnelDestIpAddrDestination IP address of the static encap tunnel. If not specified, the static encap tunnel
inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel
entry is created.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.5 |
cienaCesGmplsStaticIngressCoroutedTunnelAdminStateSpecifies the administrative status of the static encap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.6 |
cienaCesGmplsStaticIngressCoroutedTunnelOperStateSpecifies the operational status of the static encap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.7 |
cienaCesGmplsStaticIngressCoroutedTunnelForwardOutLabelThe label for the static encap tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.8 |
cienaCesGmplsStaticIngressCoroutedTunnelReverseInLabelThe label for the static encap tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.9 |
cienaCesGmplsStaticIngressCoroutedTunnelProtectionRoleThe label for the static encap tunnel.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.10 |
cienaCesGmplsStaticIngressCoroutedTunnelProtectionPartnerNameProtection partner name of the static encap tunnel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.11 |
cienaCesGmplsStaticIngressCoroutedTunnelProtectionStateSpecifies the Protection status of the static encap tunnel.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.12 |
cienaCesGmplsStaticIngressCoroutedTunnelTTLPolicySpecifies whether TTL is fixed or inherited from the frame.ro TTLPolicy .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.13 |
cienaCesGmplsStaticIngressCoroutedTunnelFixedTTLIf the TTL policy for the static encap tunnel is fixed, then this object is
the TTL value.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.14 |
cienaCesGmplsStaticIngressCoroutedTunnelGrpIndexThe group ID of the tunnel group of which the static encap tunnel is a member.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.15 |
cienaCesGmplsStaticIngressCoroutedTunnelReversionIndicates whether tunnel reversion is turned on/off for this encap tunnel.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.16 |
cienaCesGmplsStaticIngressCoroutedTunnelReversionTimeoutThis object represents the tunnel reversion hold time in seconds before
the primary encap tunnel switches back as active tunnel in its tunnel group.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.17 |
cienaCesGmplsStaticIngressCoroutedTunnelCosProfileIndexThis object represents Cos profile indexro INTEGER .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.18 |
cienaCesGmplsStaticIngressCoroutedTunnelCosProfileNameSpecifies the name of Cos profilero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.19 |
cienaCesGmplsStaticIngressCoroutedTunnelBfdMonitoringSpecifies status of BFD monitoring.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.20 |
cienaCesGmplsStaticIngressCoroutedTunnelBfdProfileNameThis object represent BFD profile name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.21 |
cienaCesGmplsStaticIngressCoroutedTunnelBfdSessionNameSpecifies BFD session name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.22 |
cienaCesGmplsStaticIngressCoroutedTunnelAisMonitoringSpecifies status of AIS monitoring.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.23 |
cienaCesGmplsStaticIngressCoroutedTunnelAisProfileNameThis object represent AIS profile name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.24 |
cienaCesGmplsStaticIngressCoroutedTunnelBfdSessionFaultedIndicates if BFD is faulted.ro INTEGER .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.25 |
cienaCesGmplsStaticIngressCoroutedTunnelBfdProfileIndexThis represents the BFD profile index in the BFD profile table
configured for this gmpls static ingress corouted tunnelro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.26 |
cienaCesGmplsStaticIngressCoroutedTunnelRecoveryDisjointSpecifies the type of Recovery Disjointro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.27 |
cienaCesGmplsStaticIngressCoroutedTunnelNextHopIfNumThis represents next hop interface number for this
gmpls static ingress corouted tunnelro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.28 |
cienaCesGmplsStaticIngressCoroutedTunnelLspIdThis represents LSP ID for this gmpls static
ingress corouted tunnelro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.29 |
cienaCesGmplsStaticIngressCoroutedTunnelSrcTunnelIdThis represents source tunnel ID for this gmpls
static ingress corouted tunnelro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.30 |
cienaCesGmplsStaticIngressCoroutedTunnelDestTunnelIdThis represents destination tunnel ID for this gmpls
static ingress corouted tunnelro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.2.1.31 |
cienaCesGmplsDynamicIngressUniDirTunnelTableThe (conceptual) table listing the MPLS Dynamic encap tunnels. SEQUENCE OF CienaCesGmplsDynamicIngressUniDirTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.3 |
cienaCesGmplsDynamicIngressUniDirTunnelEntryThis represents an entry of the MPLS Dynamic encap tunnel table. CienaCesGmplsDynamicIngressUniDirTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.3.1 |
cienaCesGmplsDynamicIngressUniDirTunnelIndexUnique index in the table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.1 |
cienaCesGmplsDynamicIngressUniDirTunnelNameThis represents the encap tunnel name. Tunnel names are common across Dynamic and dynamic.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.2 |
cienaCesMplsDynamicIngressUniDirTunnelLspIdA unique index within a tunnel group.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.3 |
cienaCesGmplsDynamicIngressUniDirTunnelNextHopIpSpecifies the next hop IP address for the Dynamic encap tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.4 |
cienaCesGmplsDynamicIngressUniDirTunnelSrcIpAddrSource IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel
inherits the IP address of the tunnel-group. This object cannot be modified once the Dynamic encap tunnel
entry is created.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.5 |
cienaCesGmplsDynamicIngressUniDirTunnelDestIpAddrDestination IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel
inherits the IP address of the tunnel-group. This object cannot be modified once the Dynamic encap tunnel
entry is created.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.6 |
cienaCesGmplsDynamicIngressUniDirTunnelAdminStateSpecifies the administrative status of the Dynamic encap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.7 |
cienaCesGmplsDynamicIngressUniDirTunnelOperStateSpecifies the operational status of the Dynamic encap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.8 |
cienaCesGmplsDynamicIngressUniDirTunnelForwardOutLabelThe label for the Dynamic encap tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.9 |
cienaCesGmplsDynamicIngressUniDirTunnelProtectionRoleThe label for the Dynamic encap tunnel.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.10 |
cienaCesGmplsDynamicIngressUniDirTunnelProtectionPartnerNameProtection partner name of the Dynamic encap tunnel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.11 |
cienaCesGmplsDynamicIngressUniDirTunnelProtectionStateSpecifies the Protection status of the Dynamic encap tunnel.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.12 |
cienaCesGmplsDynamicIngressUniDirTunnelTTLPolicySpecifies whether TTL is fixed or inherited from the frame.ro TTLPolicy .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.13 |
cienaCesGmplsDynamicIngressUniDirTunnelFixedTTLIf the TTL policy for the Dynamic encap tunnel is fixed, then this object is
the TTL value.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.14 |
cienaCesGmplsDynamicIngressUniDirTunnelGrpIndexThe group ID of the tunnel group of which the Dynamic encap tunnel is a member.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.15 |
cienaCesGmplsDynamicIngressUniDirTunnelReversionIndicates whether tunnel reversion is turned on/off for this encap tunnel.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.16 |
cienaCesGmplsDynamicIngressUniDirTunnelReversionTimeoutThis object represents the tunnel reversion hold time in seconds before
the primary encap tunnel switches back as active tunnel in its tunnel group.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.17 |
cienaCesGmplsDynamicIngressUniDirTunnelCosProfileIndexThis object represents Cos profile indexro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.18 |
cienaCesGmplsDynamicIngressUniDirTunnelCosProfileNameSpecifies the name of Cos profilero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.19 |
cienaCesGmplsDynamicIngressUniDirTunnelRecordRouteIndicates whether or not an FRR (fast re-route) tunnel needs to be created for this dynamic encap tunnel.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.20 |
cienaCesGmplsDynamicIngressUniDirTunnelFastRouteIndicates the fast route method for the dynamic encap tunnel. This object cannot be modified once the
dynamic encap tunnel entry is created.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.21 |
cienaCesGmplsDynamicIngressUniDirTunnelSetupPriorityIndicates the set up priority of the dynamic encap tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.22 |
cienaCesGmplsDynamicIngressUniDirTunnelHoldPriorityIndicates the holding priority of the dynamic encap tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.23 |
cienaCesGmplsDynamicIngressUniDirTunnelPathIndexIndex into the cienaCesmplsTunnelPathTable entry that
specifies the explicit route hops for this dynamic encap tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.24 |
cienaCesGmplsDynamicIngressUniDirTunnelPathNameThe path name corresponding to the pathIndex object.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.25 |
cienaCesGmplsDynamicIngressUniDirTunnelBandwidthProfileThis object represents the bandwidth profile attached to this tunnel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.26 |
cienaCesGmplsDynamicIngressUniDirTunnelResourcePointerThe OID must be one of the entries in mplsTunnelResourceTable.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.3.1.27 |
cienaCesGmplsDynamicIngressCoroutedTunnelTableThe (conceptual) table listing the MPLS Dynamic encap co-routed tunnels. SEQUENCE OF CienaCesGmplsDynamicIngressCoroutedTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.4 |
cienaCesGmplsDynamicIngressCoroutedTunnelEntryThis represents an entry of the MPLS Dynamic encap co-routed tunnel table. CienaCesGmplsDynamicIngressCoroutedTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.4.1 |
cienaCesGmplsDynamicIngressCoroutedTunnelIndexUnique index in the table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.1 |
cienaCesGmplsDynamicIngressCoroutedTunnelNameThis represents the encap tunnel name. Tunnel names are common across Dynamic and dynamic.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.2 |
cienaCesGmplsDynamicIngressCoroutedTunnelNextHopIpSpecifies the next hop IP address for the Dynamic encap tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.3 |
cienaCesGmplsDynamicIngressCoroutedTunnelSrcIpAddrSource IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel
inherits the IP address of the tunnel-group. This object cannot be modified once the Dynamic encap tunnel
entry is created.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.4 |
cienaCesGmplsDynamicIngressCoroutedTunnelDestIpAddrDestination IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel
inherits the IP address of the tunnel-group. This object cannot be modified once the Dynamic encap tunnel
entry is created.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.5 |
cienaCesGmplsDynamicIngressCoroutedTunnelAdminStateSpecifies the administrative status of the Dynamic encap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.6 |
cienaCesGmplsDynamicIngressCoroutedTunnelOperStateSpecifies the operational status of the Dynamic encap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.7 |
cienaCesGmplsDynamicIngressCoroutedTunnelForwardOutLabelThe label for the Dynamic encap tunnel.ro Unsigned32 ( 0..1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.8 |
cienaCesGmplsDynamicIngressCoroutedTunnelReverseInLabelThe label for the Dynamic encap tunnel.ro Unsigned32 ( 0..1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.9 |
cienaCesGmplsDynamicIngressCoroutedTunnelProtectionRoleThe label for the Dynamic encap tunnel.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.10 |
cienaCesGmplsDynamicIngressCoroutedTunnelProtectionPartnerNameProtection partner name of the Dynamic encap tunnel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.11 |
cienaCesGmplsDynamicIngressCoroutedTunnelProtectionStateSpecifies the Protection status of the Dynamic encap tunnel.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.12 |
cienaCesGmplsDynamicIngressCoroutedTunnelTTLPolicySpecifies whether TTL is fixed or inherited from the frame.ro TTLPolicy .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.13 |
cienaCesGmplsDynamicIngressCoroutedTunnelFixedTTLIf the TTL policy for the Dynamic encap tunnel is fixed, then this object is
the TTL value.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.14 |
cienaCesGmplsDynamicIngressCoroutedTunnelGrpIndexThe group ID of the tunnel group of which the Dynamic encap tunnel is a member.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.15 |
cienaCesGmplsDynamicIngressCoroutedTunnelReversionIndicates whether tunnel reversion is turned on/off for this encap tunnel.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.16 |
cienaCesGmplsDynamicIngressCoroutedTunnelReversionTimeoutThis object represents the tunnel reversion hold time in seconds before
the primary encap tunnel switches back as active tunnel in its tunnel group.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.17 |
cienaCesGmplsDynamicIngressCoroutedTunnelCosProfileIndexThis object represents Cos profile indexro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.18 |
cienaCesGmplsDynamicIngressCoroutedTunnelCosProfileNameSpecifies the name of Cos profilero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.19 |
cienaCesGmplsDynamicIngressCoroutedTunnelRecordRouteIndicates whether or not an FRR (fast re-route) tunnel needs to be created for this dynamic encap tunnel.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.20 |
cienaCesGmplsDynamicIngressCoroutedTunnelFastRouteIndicates the fast route method for the dynamic encap tunnel. This object cannot be modified once the
dynamic encap tunnel entry is created.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.21 |
cienaCesGmplsDynamicIngressCoroutedTunnelSetupPriorityIndicates the set up priority of the dynamic encap tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.22 |
cienaCesGmplsDynamicIngressCoroutedTunnelHoldPriorityIndicates the holding priority of the dynamic encap tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.23 |
cienaCesGmplsDynamicIngressCoroutedTunnelPathIndexIndex into the cienaCesmplsTunnelPathTable entry that
specifies the explicit route hops for this dynamic encap tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.24 |
cienaCesGmplsDynamicIngressCoroutedTunnelPathNameThe path name corresponding to the pathIndex object.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.25 |
cienaCesGmplsDynamicIngressCoroutedTunnelBandwidthProfileThis object represents the bandwidth profile attached to this tunnel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.26 |
cienaCesGmplsDynamicIngressCoroutedTunnelResourcePointerThe OID must be one of the entries in mplsTunnelResourceTable.ro RowPointer (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.27 |
cienaCesGmplsDynamicIngressCoroutedTunnelBfdMonitoringSpecifies status of BFD monitoring.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.28 |
cienaCesGmplsDynamicIngressCoroutedTunnelBfdProfileNameThis object represent BFD profile name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.29 |
cienaCesGmplsDynamicIngressCoroutedTunnelBfdSessionNameSpecifies BFD session name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.30 |
cienaCesGmplsDynamicIngressCoroutedTunnelBfdSessionFaultedIndicates if BFD is faulted.ro INTEGER .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.31 |
cienaCesGmplsDynamicIngressCoroutedTunnelBfdProfileIndexThis represents the BFD profile index in the BFD profile table
configured for this gmpls dynamic ingress corouted tunnelro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.32 |
cienaCesGmplsDynamicIngressCoroutedTunnelAutoBackupEnableIndicates if auto-backup is enabled for this tunnel and
always remains 0 in case of backup tunnel.ro INTEGER .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.33 |
cienaCesGmplsDynamicIngressCoroutedTunnelLspReoptimizationIndicates if Lsp-Reoptimization is enabled or disabled for this tunnel.ro MplsGlobalState .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.34 |
cienaCesGmplsDynamicIngressCoroutedTunnelLspReOptTimeIntervalIndicates Lsp-Reoptimization Time interval(in minutes) for this tunnel and
always remains 0 in case of backup tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.35 |
cienaCesGmplsDynamicIngressCoroutedTunnelPathDisjointTypeIndicates path diversification criteria used for this tunnel.
It can either be node based or srlg based or link based or combination.ro PathDisjointType .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.36 |
cienaCesGmplsDynamicIngressCoroutedTunnelPathDisjointModeIndicates mode used for path diversification for this tunnel .ro PathDisjointMode .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.37 |
cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeEnableIndicates if auto-size is enabled for this tunnel.ro MplsGlobalState .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.38 |
cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeIntervalIndicates auto-sizing interval(in minutes) for this tunnel and
always remains 0 in case of backup tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.39 |
cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeFailureHdlrIndicates auto-sizing failure handler for this tunnel.ro AutoSizeFailHdlr .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.40 |
cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeStateIndicates dynamic auto-sizing states for this tunnel.ro AutoSizeState .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.41 |
cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeModeIndicates auto-sizing mode for this tunnel.ro AutoSizeMode .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.42 |
cienaCesGmplsDynamicIngressCoroutedTunnelMinBandwidthIndicates auto-size minimum bandwidth(in kbps) for this tunnel and
always remains 0 in case of backup tunnel.ro MplsBitRate (MPLS-TC-STD-MIB) .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.43 |
cienaCesGmplsDynamicIngressCoroutedTunnelMaxBandwidthIndicates auto-size maximum bandwidth(in kbps) for this tunnel and
always remains 0 in case of backup tunnel.ro MplsBitRate (MPLS-TC-STD-MIB) .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.44 |
cienaCesGmplsDynamicIngressCoroutedTunnelIncBandwidthIndicates auto-size increment bandwidth(in kbps) for this tunnel and
always remains 0 in case of backup tunnel.ro MplsBitRate (MPLS-TC-STD-MIB) .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.45 |
cienaCesGmplsDynamicIngressCoroutedTunnelCurBandwidthIndicates auto-size current bandwidth(in kbps) for this tunnel.ro MplsBitRate (MPLS-TC-STD-MIB) .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.46 |
cienaCesGmplsDynamicIngressCoroutedTunnelReqBandwidthIndicates auto-size requested bandwidth(in kbps) for this tunnel.ro MplsBitRate (MPLS-TC-STD-MIB) .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.47 |
cienaCesGmplsDynamicIngressCoroutedTunnelUsedBandwidthIndicates auto-size used bandwidth(in kbps) for this tunnel.ro MplsBitRate (MPLS-TC-STD-MIB) .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.48 |
cienaCesGmplsDynamicIngressCoroutedTunnelClassTypeIndicates the DSTE class type (CT0-CT7) mapped to this Tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.49 |
cienaCesGmplsDynamicIngressCoroutedTunnelResourceIncludeAllResource affinity Admin Color-Group which is applied in
include-all colors mode to constrain path selection and
always remains 0 in case of backup tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.50 |
cienaCesGmplsDynamicIngressCoroutedTunnelResourceIncludeAnyResource affinity Admin Color-Group which is applied in
include-any colors mode to constrain path selection and
always remains 0 in case of backup tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.51 |
cienaCesGmplsDynamicIngressCoroutedTunnelResourceExcludeAnyResource affinity Admin Color-Group which is applied in
exclude-any colors mode to constrain path selection and
always remains 0 in case of backup tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.52 |
cienaCesGmplsDynamicIngressCoroutedLspIdIndicates the Ingress LSP ID.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.4.1.53 |
cienaCesGmplsStaticEgressUniDirTunnelTableThe (conceptual) table listing the MPLS decap tunnels. SEQUENCE OF CienaCesGmplsStaticEgressUniDirTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.5 |
cienaCesGmplsStaticEgressUniDirTunnelEntryAn entry in the static decap tunnel table. CienaCesGmplsStaticEgressUniDirTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.5.1 |
cienaCesGmplsStaticEgressUniDirTunnelIndexThis represents the unique index in the table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.5.1.1 |
cienaCesGmplsStaticEgressUniDirTunnelNameThis represents the decap tunnel name.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.2.5.1.2 |
cienaCesGmplsStaticEgressUniDirTunnelAdminStateAdministrative status of the static decap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.5.1.3 |
cienaCesGmplsStaticEgressUniDirTunnelOperStateIndicates the operational status of the static decap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.5.1.4 |
cienaCesGmplsStaticEgressUniDirTunnelPrevHopIpAddrPrev hop IP address of the static decap tunnel. This object cannot be modified once the static decap
tunnel entry is created.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.5.1.5 |
cienaCesGmplsStaticEgressUniDirTunnelSourceIpAddrSource IP address of the static decap tunnel. This object cannot be modified once the static decap
tunnel entry is created.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.5.1.6 |
cienaCesGmplsStaticEgressUniDirTunnelDestIpAddrdestination IP address of the static decap tunnel. This object cannot be modified once the static decap
tunnel entry is created.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.5.1.7 |
cienaCesGmplsStaticEgressUniDirTunnelForwardInLabelIndicates the label of the static decap tunnel.ro Unsigned32 (0.. 1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.2.5.1.8 |
cienaCesGmplsStaticEgressCoroutedTunnelTableThe (conceptual) table listing the MPLS decap tunnels. SEQUENCE OF CienaCesGmplsStaticEgressCoroutedTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.6 |
cienaCesGmplsStaticEgressCoroutedTunnelEntryAn entry in the static decap tunnel table. CienaCesGmplsStaticEgressCoroutedTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.6.1 |
cienaCesGmplsStaticEgressCoroutedTunnelIndexThis represents the unique index in the table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.1 |
cienaCesGmplsStaticEgressCoroutedTunnelNameThis represents the decap tunnel name.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.2 |
cienaCesGmplsStaticEgressCoroutedTunnelAdminStateAdministrative status of the static decap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.3 |
cienaCesGmplsStaticEgressCoroutedTunnelOperStateIndicates the operational status of the static decap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.4 |
cienaCesGmplsStaticEgressCoroutedTunnelPrevHopIpAddrPrev hop IP address of the static decap tunnel. This object cannot be modified once the static decap
tunnel entry is created.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.5 |
cienaCesGmplsStaticEgressCoroutedTunnelSourceIpAddrSource IP address of the static decap tunnel. This object cannot be modified once the static decap
tunnel entry is created.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.6 |
cienaCesGmplsStaticEgressCoroutedTunnelDestIpAddrdestination IP address of the static decap tunnel. This object cannot be modified once the static decap
tunnel entry is created.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.7 |
cienaCesGmplsStaticEgressCoroutedTunnelForwardInLabelIndicates the in label of the static decap tunnel.ro Unsigned32 (0.. 1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.8 |
cienaCesGmplsStaticEgressCoroutedTunnelReverseOutLabelIndicates the out label of the static decap tunnel.ro Unsigned32 (0.. 1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.9 |
cienaCesGmplsStaticEgressCoroutedTunnelProtectionRolespecifies protection tunnel role.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.10 |
cienaCesGmplsStaticEgressCoroutedTunnelProtectionPartnerNameProtection partner name of the static encap tunnel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.11 |
cienaCesGmplsStaticEgressCoroutedTunnelProtectionStateSpecifies the Protection status of the static encap tunnel.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.12 |
cienaCesGmplsStaticEgressCoroutedTunnelGrpIndexThe group ID of the tunnel group of which the Dynamic encap tunnel is a member.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.13 |
cienaCesGmplsStaticEgressCoroutedTunnelReversionIndicates whether tunnel reversion is turned on/off for this encap tunnel.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.14 |
cienaCesGmplsStaticEgressCoroutedTunnelReversionTimeoutThis object represents the tunnel reversion hold time in seconds before
the primary encap tunnel switches back as active tunnel in its tunnel group.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.15 |
cienaCesGmplsStaticEgressCoroutedTunnelCosProfileIndexThis object represents Cos profile indexro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.16 |
cienaCesGmplsStaticEgressCoroutedTunnelCosProfileNameSpecifies the name of Cos profilero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.17 |
cienaCesGmplsStaticEgressCoroutedTunnelBfdMonitoringSpecifies status of BFD monitoring.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.18 |
cienaCesGmplsStaticEgressCoroutedTunnelBfdProfileNameThis object represent BFD profile name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.19 |
cienaCesGmplsStaticEgressCoroutedTunnelBfdSessionNameSpecifies BFD session name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.20 |
cienaCesGmplsStaticEgressCoroutedTunnelAisMonitoringSpecifies status of AIS monitoring.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.21 |
cienaCesGmplsStaticEgressCoroutedTunnelAisProfileNameThis object represent AIS profile name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.22 |
cienaCesGmplsStaticEgressCoroutedTunnelBfdSessionFaultedIndicates if BFD is faulted.ro INTEGER .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.23 |
cienaCesGmplsStaticEgressCoroutedTunnelBfdProfileIndexThis represents the BFD profile index in the BFD profile table
configured for this gmpls static egress corouted tunnelro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.24 |
cienaCesGmplsStaticEgressCoroutedTunnelRecoveryDisjointSpecifies the type of Recovery Disjointro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.25 |
cienaCesGmplsStaticEgressCoroutedTunnelTTLPolicySpecifies whether TTL is fixed or inherited from the frame.ro TTLPolicy .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.26 |
cienaCesGmplsStaticEgressCoroutedTunnelFixedTTLIf the TTL policy for the Dynamic encap tunnel is fixed, then this object is
the TTL value.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.27 |
cienaCesGmplsStaticEgressCoroutedTunnelPrevHopIfNumThis represents previous hop interface number
for this gmpls static egress corouted tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.28 |
cienaCesGmplsStaticEgressCoroutedTunnelLspIdThis represents LSP ID
for this gmpls static egress corouted tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.29 |
cienaCesGmplsStaticEgressCoroutedTunnelSrcTunnelIdThis represents source tunnel ID
for this gmpls static egress corouted tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.30 |
cienaCesGmplsStaticEgressCoroutedTunnelDestTunnelIdThis represents source tunnel ID
for this gmpls static egress corouted tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.6.1.31 |
cienaCesGmplsDynamicEgressUniDirTunnelTableThe (conceptual) table listing the MPLS dynamic decap tunnels. SEQUENCE OF CienaCesGmplsDynamicEgressUniDirTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.7 |
cienaCesGmplsDynamicEgressUniDirTunnelEntryAn entry in the dynamic decap tunnel table. CienaCesGmplsDynamicEgressUniDirTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.7.1 |
cienaCesGmplsDynamicEgressUniDirTunnelIndexThis represents the unique index in the table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.7.1.1 |
cienaCesGmplsDynamicEgressUniDirTunnelNameThis represents the dynamic decap tunnel name.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.2.7.1.2 |
cienaCesGmplsDynamicEgressUniDirTunnelAdminStateIndicates the administrative status of the dynamic decap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.7.1.3 |
cienaCesGmplsDynamicEgressUniDirTunnelOperStateIndicates the operational status of the dynamic decap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.7.1.4 |
cienaCesGmplsDynamicEgressUniDirLspIdIndicates the LSP ID.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.7.1.5 |
cienaCesGmplsDynamicEgressUniDirTunnelPrevHopIpAddrSource IP address of the dynamic decap tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.7.1.6 |
cienaCesGmplsDynamicEgressUniDirTunnelSourceIpAddrSource IP address of the dynamic decap tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.7.1.7 |
cienaCesGmplsDynamicEgressUniDirTunnelDestIpAddrDestination IP address of the dynamic decap tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.7.1.8 |
cienaCesGmplsDynamicEgressUniDirTunnelForwardInLabelIdicates the label of the dynamic decap tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.7.1.9 |
cienaCesGmplsDynamicEgressCoroutedTunnelTableThe (conceptual) table listing the MPLS dynamic decap tunnels. SEQUENCE OF CienaCesGmplsDynamicEgressCoroutedTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.8 |
cienaCesGmplsDynamicEgressCoroutedTunnelEntryAn entry in the dynamic decap tunnel table. CienaCesGmplsDynamicEgressCoroutedTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.8.1 |
cienaCesGmplsDynamicEgressCoroutedTunnelIndexThis represents the unique index in the table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.1 |
cienaCesGmplsDynamicEgressCoroutedTunnelNameThis represents the dynamic decap tunnel name.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.2 |
cienaCesGmplsDynamicEgressCoroutedTunnelAdminStateIndicates the administrative status of the dynamic decap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.3 |
cienaCesGmplsDynamicEgressCoroutedTunnelOperStateIndicates the operational status of the dynamic decap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.4 |
cienaCesGmplsDynamicEgressCoroutedLspIdIndicates the LSP ID.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.5 |
cienaCesGmplsDynamicEgressCoroutedTunnelPrevHopIpAddrPrev hop IP address of the dynamic decap tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.6 |
cienaCesGmplsDynamicEgressCoroutedTunnelSourceIpAddrSource IP address of the dynamic decap tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.7 |
cienaCesGmplsDynamicEgressCoroutedTunnelDestIpAddrDestination IP address of the dynamic decap tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.8 |
cienaCesGmplsDynamicEgressCoroutedTunnelForwardInLabelIdicates the label of the dynamic decap tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.9 |
cienaCesGmplsDynamicEgressCoroutedTunnelReverseOutLabelIndicates the out label of the dynamic decap tunnel.ro Unsigned32 (0.. 1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.10 |
cienaCesGmplsDynamicEgressCoroutedTunnelProtectionRolespecifies role of this dynamic tunnelro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.11 |
cienaCesGmplsDynamicEgressCoroutedTunnelProtectionPartnerNameProtection partner name of the dynamic encap tunnel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.12 |
cienaCesGmplsDynamicEgressCoroutedTunnelProtectionStateSpecifies the Protection status of the static encap tunnel.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.13 |
cienaCesGmplsDynamicEgressCoroutedTunnelGrpIndexThe group ID of the tunnel group of which the Dynamic encap tunnel is a member.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.14 |
cienaCesGmplsDynamicEgressCoroutedTunnelReversionIndicates whether tunnel reversion is turned on/off for this encap tunnel.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.15 |
cienaCesGmplsDynamicEgressCoroutedTunnelReversionTimeoutThis object represents the tunnel reversion hold time in seconds before
the primary encap tunnel switches back as active tunnel in its tunnel group.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.16 |
cienaCesGmplsDynamicEgressCoroutedTunnelCosProfileIndexThis object represents Cos profile indexro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.17 |
cienaCesGmplsDynamicEgressCoroutedTunnelCosProfileNameSpecifies the name of Cos profilero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.18 |
cienaCesGmplsDynamicEgressCoroutedTunnelBfdMonitoringThis parameter indicates if BFD monitoring is enabled or disableb on tunnelro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.19 |
cienaCesGmplsDynamicEgressCoroutedTunnelBfdProfileNameIt Indicates assigned BFD profile names to tunnelro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.20 |
cienaCesGmplsDynamicEgressCoroutedTunnelBfdSessionNameIt Indicates BFD session names.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.21 |
cienaCesGmplsDynamicEgressCoroutedTunnelBfdSessionFaultedSpecifies if BFD faultedro INTEGER .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.22 |
cienaCesGmplsDynamicEgressCoroutedTunnelBfdProfileIndexThis represents the BFD profile index in the BFD profile table
configured for this gmpls dynamic egress corouted tunnelro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.23 |
cienaCesGmplsDynamicEgressCoroutedTunnelTTLPolicySpecifies whether TTL is fixed or inherited from the frame.ro TTLPolicy .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.24 |
cienaCesGmplsDynamicEgressCoroutedTunnelFixedTTLIf the TTL policy for the Dynamic encap tunnel is fixed, then this object is
the TTL value.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.8.1.25 |
cienaCesGmplsStaticTransitUniDirTunnelTableThe (conceptual) table listing the MPLS static TransitUniDir tunnels. SEQUENCE OF CienaCesGmplsStaticTransitUniDirTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.9 |
cienaCesGmplsStaticTransitUniDirTunnelEntryAn entry in the static TransitUniDir tunnel table. CienaCesGmplsStaticTransitUniDirTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.9.1 |
cienaCesGmplsStaticTransitUniDirTunnelIndexThis represents the unique index in the table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.9.1.1 |
cienaCesGmplsStaticTransitUniDirTunnelNameThis represents the static TransitUniDir tunnel name.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.2.9.1.2 |
cienaCesGmplsStaticTransitUniDirTunnelAdminStateIndicates the administrative status of the static TransitUniDir tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.9.1.3 |
cienaCesGmplsStaticTransitUniDirTunnelOperStateIndicates the operational status of the static TransitUniDir tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.9.1.4 |
cienaCesGmplsStaticTransitUniDirTunnelSourceIpAddrSource IP address of the static TransitUniDir tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.9.1.5 |
cienaCesGmplsStaticTransitUniDirTunnelDestIpAddrDestination IP address of the static TransitUniDir tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.9.1.6 |
cienaCesGmplsStaticTransitUniDirTunnelNextHopIpAddrNext hop IP address of the static TransitUniDir tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.9.1.7 |
cienaCesGmplsStaticTransitUniDirTunnelPrevHopIpAddrPrevious hop IP address of the static TransitUniDir tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.9.1.8 |
cienaCesGmplsStaticTransitUniDirTunnelForwardInLabelIndicates the incoming label of the static TransitUniDir tunnel.ro Unsigned32 ( 0..1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.2.9.1.9 |
cienaCesGmplsStaticTransitUniDirTunnelForwardOutLabelIndicates the outgoing label of the static TransitUniDir tunnel.ro Unsigned32 ( 0..1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.2.9.1.10 |
cienaCesGmplsStaticTransitUniDirTunnelTTLPolicySpecifies whether TTL is fixed or inherited from the frame.ro TTLPolicy .1.3.6.1.4.1.1271.2.1.18.1.2.9.1.11 |
cienaCesGmplsStaticTransitUniDirTunnelFixedTTLIf the TTL policy for the static TransitUniDir tunnel is fixed, then this object is
the TTL value.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.9.1.12 |
cienaCesGmplsStaticTransitUniDirTunnelCosProfileIndexThis object represents Cos profile indexro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.9.1.13 |
cienaCesGmplsStaticTransitUniDirTunnelCosProfileNameSpecifies the name of Cos profilero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.9.1.14 |
cienaCesGmplsStaticTransitUniDirTunnelAisMonitoringSpecifies AIS monitoring's status.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.9.1.15 |
cienaCesGmplsStaticTransitUniDirTunnelAisProfileNameThis object contais AIS profile name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.9.1.16 |
cienaCesGmplsStaticTransitUniDirTunnelIncomingPacketsThe number of incoming packets for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.9.1.17 |
cienaCesGmplsStaticTransitUniDirTunnelOutgoingPacketsThe number of outgoing packets for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.9.1.18 |
cienaCesGmplsStaticTransitUniDirTunnelIncomingBytesThe number of incoming bytes for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.9.1.19 |
cienaCesGmplsStaticTransitUniDirTunnelOutgoingBytesThe number of outgoing bytes for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.9.1.20 |
cienaCesGmplsStaticTransitCoroutedTunnelTableThe (conceptual) table listing the MPLS static TransitCorouted tunnels. SEQUENCE OF CienaCesGmplsStaticTransitCoroutedTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.10 |
cienaCesGmplsStaticTransitCoroutedTunnelEntryAn entry in the static TransitCorouted tunnel table. CienaCesGmplsStaticTransitCoroutedTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.10.1 |
cienaCesGmplsStaticTransitCoroutedTunnelIndexThis represents the unique index in the table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.1 |
cienaCesGmplsStaticTransitCoroutedTunnelNameThis represents the static TransitCorouted tunnel name.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.2 |
cienaCesGmplsStaticTransitCoroutedTunnelAdminStateIndicates the administrative status of the static TransitCorouted tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.3 |
cienaCesGmplsStaticTransitCoroutedTunnelOperStateIndicates the operational status of the static TransitCorouted tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.4 |
cienaCesGmplsStaticTransitCoroutedTunnelSourceIpAddrSource IP address of the static TransitCorouted tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.5 |
cienaCesGmplsStaticTransitCoroutedTunnelDestIpAddrDestination IP address of the static TransitCorouted tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.6 |
cienaCesGmplsStaticTransitCoroutedTunnelNextHopIpAddrNext hop IP address of the static TransitCorouted tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.7 |
cienaCesGmplsStaticTransitCoroutedTunnelPrevHopIpAddrPrevious hop IP address of the static TransitCorouted tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.8 |
cienaCesGmplsStaticTransitCoroutedTunnelForwardInLabelIndicates the incoming label of the static TransitCorouted tunnel.ro Unsigned32 ( 0..1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.9 |
cienaCesGmplsStaticTransitCoroutedTunnelForwardOutLabelIndicates the outgoing label of the static TransitCorouted tunnel.ro Unsigned32 ( 0..1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.10 |
cienaCesGmplsStaticTransitCoroutedTunnelReverseInLabelIndicates the incoming label of the static TransitCorouted tunnel.ro Unsigned32 ( 0..1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.11 |
cienaCesGmplsStaticTransitCoroutedTunnelReverseOutLabelIndicates the outgoing label of the static TransitCorouted tunnel.ro Unsigned32 ( 0..1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.12 |
cienaCesGmplsStaticTransitCoroutedTunnelTTLPolicySpecifies whether TTL is fixed or inherited from the frame.ro TTLPolicy .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.13 |
cienaCesGmplsStaticTransitCoroutedTunnelFixedTTLIf the TTL policy for the static TransitCorouted tunnel is fixed, then this object is
the TTL value.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.14 |
cienaCesGmplsStaticTransitCoroutedTunnelCosProfileIndexThis object represents Cos profile indexro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.15 |
cienaCesGmplsStaticTransitCoroutedTunnelCosProfileNameSpecifies the name of Cos profilero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.16 |
cienaCesGmplsStaticTransitCoroutedTunnelAisMonitoringspecifies AIS monitoring.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.17 |
cienaCesGmplsStaticTransitCoroutedTunnelAisProfileNameThis object contains AIS profile namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.18 |
cienaCesGmplsStaticTransitCoroutedTunnelPrevHopIfNumThis represents previous hop interface number
for this gmpls transit corouted tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.19 |
cienaCesGmplsStaticTransitCoroutedTunnelNextHopIfNumThis represents next hop interface number
for this gmpls transit corouted tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.20 |
cienaCesGmplsStaticTransitCoroutedTunnelLspIdThis represents LSP ID for this gmpls transit corouted tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.21 |
cienaCesGmplsStaticTransitCoroutedTunnelSrcTunnelIdThis represents source tunnel ID
for this gmpls transit corouted tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.22 |
cienaCesGmplsStaticTransitCoroutedTunnelDestTunnelIdThis represents destination tunnel ID
for this gmpls transit corouted tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.23 |
cienaCesGmplsStaticTransitCoroutedTunnelIncomingPacketsThe number of incoming packets for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.24 |
cienaCesGmplsStaticTransitCoroutedTunnelOutgoingPacketsThe number of outgoing packets for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.25 |
cienaCesGmplsStaticTransitCoroutedTunnelIncomingBytesThe number of incoming bytes for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.26 |
cienaCesGmplsStaticTransitCoroutedTunnelOutgoingBytesThe number of outgoing bytes for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.27 |
cienaCesGmplsStaticTransitCoroutedTunnelReverseIncomingPacketsThe number of reverse direction incoming packets for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.28 |
cienaCesGmplsStaticTransitCoroutedTunnelReverseOutgoingPacketsThe number of reverse direction outgoing packets for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.29 |
cienaCesGmplsStaticTransitCoroutedTunnelReverseIncomingBytesThe number of reverse direction incoming bytes for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.30 |
cienaCesGmplsStaticTransitCoroutedTunnelReverseOutgoingBytesThe number of reverse direction outgoing bytes for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.10.1.31 |
cienaCesGmplsDynamicTransitUniDirTunnelTableThe (conceptual) table listing the MPLS Dynamic TransitUniDir tunnels. SEQUENCE OF CienaCesGmplsDynamicTransitUniDirTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.11 |
cienaCesGmplsDynamicTransitUniDirTunnelEntryAn entry in the Dynamic TransitUniDir tunnel table. CienaCesGmplsDynamicTransitUniDirTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.11.1 |
cienaCesGmplsDynamicTransitUniDirTunnelIndexThis represents the unique index in the table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.11.1.1 |
cienaCesGmplsDynamicTransitUniDirTunnelNameThis represents the Dynamic TransitUniDir tunnel name.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.2.11.1.2 |
cienaCesGmplsDynamicTransitUniDirTunnelAdminStateIndicates the administrative status of the Dynamic TransitUniDir tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.11.1.3 |
cienaCesGmplsDynamicTransitUniDirTunnelOperStateIndicates the operational status of the Dynamic TransitUniDir tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.11.1.4 |
cienaCesGmplsDynamicTransitUniDirTunnelSourceIpAddrSource IP address of the Dynamic TransitUniDir tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.11.1.5 |
cienaCesGmplsDynamicTransitUniDirTunnelDestIpAddrDestination IP address of the Dynamic TransitUniDir tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.11.1.6 |
cienaCesGmplsDynamicTransitUniDirTunnelNextHopIpAddrNext hop IP address of the Dynamic TransitUniDir tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.11.1.7 |
cienaCesGmplsDynamicTransitUniDirTunnelForwardInLabelIndicates the incoming label of the Dynamic TransitUniDir tunnel.ro Unsigned32 ( 0..1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.2.11.1.8 |
cienaCesGmplsDynamicTransitUniDirTunnelForwardOutLabelIndicates the outgoing label of the Dynamic TransitUniDir tunnel.ro Unsigned32 ( 0..1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.2.11.1.9 |
cienaCesGmplsDynamicTransitUniDirTunnelTTLPolicySpecifies whether TTL is fixed or inherited from the frame.ro TTLPolicy .1.3.6.1.4.1.1271.2.1.18.1.2.11.1.10 |
cienaCesGmplsDynamicTransitUniDirTunnelFixedTTLIf the TTL policy for the Dynamic TransitUniDir tunnel is fixed, then this object is
the TTL value.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.11.1.11 |
cienaCesGmplsDynamicTransitUniDirTunnelIncomingPacketsThe number of incoming packets for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.11.1.12 |
cienaCesGmplsDynamicTransitUniDirTunnelOutgoingPacketsThe number of outgoing packets for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.11.1.13 |
cienaCesGmplsDynamicTransitUniDirTunnelIncomingBytesThe number of incoming bytes for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.11.1.14 |
cienaCesGmplsDynamicTransitUniDirTunnelOutgoingBytesThe number of outgoing bytes for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.11.1.15 |
cienaCesGmplsDynamicTransitCoroutedTunnelTableThe (conceptual) table listing the MPLS Dynamic TransitCoRouted tunnels. SEQUENCE OF CienaCesGmplsDynamicTransitCoroutedTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.12 |
cienaCesGmplsDynamicTransitCoroutedTunnelEntryAn entry in the Dynamic TransitCorouted tunnel table. CienaCesGmplsDynamicTransitCoroutedTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.12.1 |
cienaCesGmplsDynamicTransitCoroutedTunnelIndexThis represents the unique index in the table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.12.1.1 |
cienaCesGmplsDynamicTransitCoroutedTunnelNameThis represents the Dynamic TransitCorouted tunnel name.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.2.12.1.2 |
cienaCesGmplsDynamicTransitCoroutedTunnelAdminStateIndicates the administrative status of the Dynamic TransitCorouted tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.12.1.3 |
cienaCesGmplsDynamicTransitCoroutedTunnelOperStateIndicates the operational status of the Dynamic TransitCorouted tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.12.1.4 |
cienaCesGmplsDynamicTransitCoroutedTunnelSourceIpAddrSource IP address of the Dynamic TransitCorouted tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.12.1.5 |
cienaCesGmplsDynamicTransitCoroutedTunnelDestIpAddrDestination IP address of the Dynamic TransitCorouted tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.12.1.6 |
cienaCesGmplsDynamicTransitCoroutedTunnelNextHopIpAddrNext hop IP address of the Dynamic TransitCorouted tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.12.1.7 |
cienaCesGmplsDynamicTransitCoroutedTunnelPrevHopIpAddrPrevious hop IP address of the Dynamic TransitCorouted tunnel.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.12.1.8 |
cienaCesGmplsDynamicTransitCoroutedTunnelForwardInLabelIndicates the incoming label of the Dynamic TransitCorouted tunnel.ro Unsigned32 ( 0..1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.2.12.1.9 |
cienaCesGmplsDynamicTransitCoroutedTunnelForwardOutLabelIndicates the outgoing label of the Dynamic TransitCorouted tunnel.ro Unsigned32 ( 0..1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.2.12.1.10 |
cienaCesGmplsDynamicTransitCoroutedTunnelReverseInLabelIndicates the incoming label of the Dynamic TransitCorouted tunnel.ro Unsigned32 ( 0..1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.2.12.1.11 |
cienaCesGmplsDynamicTransitCoroutedTunnelReverseOutLabelIndicates the outgoing label of the Dynamic TransitCorouted tunnel.ro Unsigned32 ( 0..1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.2.12.1.12 |
cienaCesGmplsDynamicTransitCoroutedTunnelTTLPolicySpecifies whether TTL is fixed or inherited from the frame.ro TTLPolicy .1.3.6.1.4.1.1271.2.1.18.1.2.12.1.13 |
cienaCesGmplsDynamicTransitCoroutedTunnelFixedTTLIf the TTL policy for the Dynamic TransitCorouted tunnel is fixed, then this object is
the TTL value.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.12.1.14 |
cienaCesGmplsDynamicTransitCoroutedTunnelIncomingPacketsThe number of incoming packets for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.12.1.15 |
cienaCesGmplsDynamicTransitCoroutedTunnelOutgoingPacketsThe number of outgoing packets for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.12.1.16 |
cienaCesGmplsDynamicTransitCoroutedTunnelIncomingBytesThe number of incoming bytes for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.12.1.17 |
cienaCesGmplsDynamicTransitCoroutedTunnelOutgoingBytesThe number of outgoing bytes for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.12.1.18 |
cienaCesGmplsDynamicTransitCoroutedTunnelReverseIncomingPacketsThe number of reverse incoming packets for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.12.1.19 |
cienaCesGmplsDynamicTransitCoroutedTunnelReverseOutgoingPacketsThe number of reverse outgoing packets for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.12.1.20 |
cienaCesGmplsDynamicTransitCoroutedTunnelReverseIncomingBytesThe number of reverse incoming bytes for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.12.1.21 |
cienaCesGmplsDynamicTransitCoroutedTunnelReverseOutgoingBytesThe number of reverse outgoing bytes for the given transit tunnel.
This object is supported only on specific platforms.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.12.1.22 |
cienaCesGmplsAssociatedTunnelTableThe (conceptual) table listing the Gmpls Associated tunnels. SEQUENCE OF CienaCesGmplsAssociatedTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.13 |
cienaCesGmplsAssociatedTunnelEntryThis represents an entry of the Gmpls static encap tunnel table. CienaCesGmplsAssociatedTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.13.1 |
cienaCesGmplsAssociatedTunnelIndexUnique tunnel index in the table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.13.1.1 |
cienaCesGmplsAssociatedTunnelNamespecifies Gmpls associated tunnel name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.13.1.2 |
cienaCesGmplsAssociatedForwardTunnelNamespecifies associated forward tunnel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.13.1.3 |
cienaCesGmplsAssociatedForwardTunnelTypespecifies associated forward tunnel type.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.13.1.4 |
cienaCesGmplsAssociatedReverseTunnelNamespecifies associated reverse tunnel.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.13.1.5 |
cienaCesGmplsAssociatedReverseTunnelTypespecifies associated reverse tunnel type.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.13.1.6 |
cienaCesGmplsAssociatedForwardTunnelDestIpAddrspecifies associated Gmpls forward tunnel destination IP addressro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.13.1.7 |
cienaCesGmplsAssociatedDynamicTunnelSrcIpAddrspecifies associated Gmpls reverse tunnel source IP address.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.13.1.8 |
cienaCesGmplsAssociatedTunnelAdminStateAdministrator status of associated tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.13.1.9 |
cienaCesGmplsAssociatedTunnelOperStateOperational status of associated tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.13.1.10 |
cienaCesGmplsAssociatedForwardTunnelOperStateOperational status of associated forward tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.13.1.11 |
cienaCesGmplsAssociatedReverseTunnelOperStateOperational status of associated reverse tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.13.1.12 |
cienaCesGmplsAssociatedProtectionRolespecifies the protection role of the associated tunnelro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.13.1.13 |
cienaCesGmplsAssociatedProtectionStatespecifies the protection status of the associated tunnelro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.13.1.14 |
cienaCesGmplsAssociatedTunnelProtectionPartnerNameThis object represents the tunnel name it is protectingro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.13.1.15 |
cienaCesGmplsAssociatedBfdMonitoringSpecifies status of BFD monitoring.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.13.1.16 |
cienaCesGmplsAssociatedBfdProfileNameThis object represent BFD profile name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.13.1.17 |
cienaCesGmplsAssociatedBfdSessionNameSpecifies BFD session name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.13.1.18 |
cienaCesGmplsAssociatedAisMonitoringSpecifies status of AIS monitoring.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.13.1.19 |
cienaCesGmplsAssociatedAisProfileNameThis object represent BFD profile name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.13.1.20 |
cienaCesGmplsAssociatedBfdSessionFaultedSpecifies BFD session error code.ro INTEGER .1.3.6.1.4.1.1271.2.1.18.1.2.13.1.21 |
cienaCesGmplsAssociatedBfdProfileIndexThis represents the BFD profile index in the BFD profile table configured
for this gmpls associated tunnelro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.13.1.22 |
cienaCesGmplsTunnelARHopTableThe GmplsTunnelARHopTable is used to indicate the
hops for an Gmpls tunnel defined in GmplsTunnelTable,
as reported by the Gmpls signalling protocol. Thus at
a transit LSR, this table (if the table is supported
and if the signaling protocol is recording actual
route information) contains the actual route of the
whole tunnel. If the signaling protocol is not
recording the actual route, this table MAY report
the information from the GmplsTunnelHopTable or the
GmplsTunnelCHopTable.
Each row in this table is indexed by
GmplsTunnelARHopListIndex. Each row also has a
secondary index GmplsTunnelARHopIndex, corresponding
to the next hop that this row corresponds to.
Please note that since the information necessary to
build entries within this table is not provided by
some Gmpls signalling protocols, implementation of
this table is optional. Furthermore, since the
information in this table is actually provided by
the Gmpls signalling protocol after the path has
been set-up, the entries in this table are provided
only for observation, and hence, all variables in
this table are accessible exclusively as read-
only.
Note also that the contencts of this table may change
while it is being read because of re-routing
activities. A network administrator may verify that
the actual route read is consistent by reference to
the GmplsTunnelLastPathChange object. SEQUENCE OF CienaCesGmplsTunnelARHopEntry .1.3.6.1.4.1.1271.2.1.18.1.2.14 |
cienaCesGmplsTunnelARHopEntryAn entry in this table represents a tunnel hop. An
entry is created by the agent for signaled ERLSP
set up by an Gmpls signalling protocol. CienaCesGmplsTunnelARHopEntry .1.3.6.1.4.1.1271.2.1.18.1.2.14.1 |
cienaGmplsTunnelARHopListIndexPrimary index into this table identifying a
particular recorded hop list. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.14.1.1 |
cienaGmplsTunnelARHopIndexSecondary index into this table identifying the
particular hop. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.14.1.2 |
cienaGmplsTunnelARHopAddrTypeThe Hop Address Type of this tunnel hop.
Note that lspid(5) is a valid option only
for tunnels signaled via CRLDP.ro INTEGER .1.3.6.1.4.1.1271.2.1.18.1.2.14.1.3 |
cienaGmplsTunnelARHopIpAddrThe Tunnel Hop Address for this tunnel hop.
The type of this address is determined by the
value of the corresponding GmplsTunnelARHopAddrType.
If GmplsTunnelARHopAddrType is set to unnum(4),
then this value contains the LSR Router ID of the
unnumbered interface. Otherwise the agent SHOULD
set this object to the zero-length string and the
manager should ignore this object.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.14.1.4 |
cienaGmplsTunnelARHopAddrUnnumIf GmplsTunnelARHopAddrType is set to unnum(4), then
this value will contain the interface identifier of
the unnumbered interface for this hop. This object
should be used in conjunction with
GmplsTunnelARHopIpAddr which would contain the LSR
Router ID in this case. Otherwise the agent should
set this object to zero-length string and the
manager should ignore this.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.14.1.5 |
cienaGmplsTunnelARHopLspIdIf GmplsTunnelARHopAddrType is set to lspid(5), then
this value will contain the LSP ID of this hop.
This object is otherwise insignificant and should
contain a value of 0 to indicate this fact.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.14.1.6 |
cienaCesGmplsEncapTunnelNotif OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.18.1.2.15 |
cienaCesGmplsNotifEncapTunnelTableTable of notification objects required for encap tunnel notification. SEQUENCE OF CienaCesGmplsNotifEncapTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.15.1 |
cienaCesGmplsNotifEncapTunnelEntryAn entry (conceptual row) in the cienaCesGmplsNotifEncapTunnelTable.
No Get, GetNext or Set is allowed on this table. CienaCesGmplsNotifEncapTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1 |
cienaCesGmplsNotifEncapTunnelIndexTunnel index of the encap tunnel associated with the
notification.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.1 |
cienaCesGmplsNotifEncapTunnelTypeEncap tunnel type of the encap tunnel associated with the
notification.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.2 |
cienaCesGmplsNotifEncapTunnelNameThis represents the encap tunnel name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.3 |
cienaCesGmplsNotifEncapTunnelAdminStateAdministrative state of the encap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.4 |
cienaCesGmplsNotifEncapTunnelOperStateOperational state of the encap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.5 |
cienaCesGmplsNotifEncapTunnelAisFaultedThis is replaced by cienaCesGmplsNotifOamTunnelAisFaulted.roobsolete TunnelAisFault .1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.6 |
cienaCesGmplsNotifEncapTunnelFaultedNodeIdIP address of the node with the AIS fault.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.7 |
cienaCesGmplsNotifEncapTunnelFarEndLerIdIP address of the far end LER for the tunne with the AIS fault.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.8 |
cienaCesGmplsNotifEncapTunnelResultspecifies the result of encap tunnel auto sizing/MBB.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.9 |
cienaCesGmplsNotifEncapTunnelProtectionRolespecifies the protection role of the dynamic encap tunnel.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.10 |
cienaCesGmplsNotifEncapTunnelRequestedBwspecifies the requested bandwidth of the dynamic encap tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.11 |
cienaCesGmplsNotifEncapTunnelOperationalBwspecifies the operational bandwidth of the dynamic encap tunnel.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.12 |
cienaCesGmplsNotifEncapTunnelMbbParentAppspecifies the parent application using MBB of the dynamic encap tunnel.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.13 |
cienaCesGmplsNotifEncapTunnelOamFaultedIndication if the tunnel has Oam fault.ro TunnelOamFault .1.3.6.1.4.1.1271.2.1.18.1.2.15.1.1.14 |
cienaCesGmplsDecapTunnelNotif OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.18.1.2.16 |
cienaCesGmplsNotifDecapTunnelTableTable of notification objects required for decap tunnel notification. SEQUENCE OF CienaCesGmplsNotifDecapTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.16.1 |
cienaCesGmplsNotifDecapTunnelEntryAn entry (conceptual row) in the cienaCesGmplsNotifDecapTunnelTable.
No Get, GetNext or Set is allowed on this table. CienaCesGmplsNotifDecapTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1 |
cienaCesGmplsNotifDecapTunnelIndexTunnel index of the decap tunnel associated with the
notification.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.1 |
cienaCesGmplsNotifDecapTunnelTypeDecap tunnel type of the decap tunnel associated with the
notification.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.2 |
cienaCesGmplsNotifDecapTunnelNameThis represents the decap tunnel name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.3 |
cienaCesGmplsNotifDecapTunnelAdminStateAdministrative state of the decap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.4 |
cienaCesGmplsNotifDecapTunnelOperStateOperational state of the decap tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.5 |
cienaCesGmplsNotifDecapTunnelAisFaultedThis is replaced by cienaCesGmplsNotifDecapTunnelOamFaulted.roobsolete TunnelAisFault .1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.6 |
cienaCesGmplsNotifDecapTunnelFaultedNodeIdIP address of the node with the AIS fault.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.7 |
cienaCesGmplsNotifDecapTunnelFarEndLerIdIP address of the far end LER for the tunne with the AIS fault.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.8 |
cienaCesGmplsNotifDecapTunnelOamFaultedIndication if the tunnel has Oam fault.ro TunnelOamFault .1.3.6.1.4.1.1271.2.1.18.1.2.16.1.1.9 |
cienaCesGmplsTransitTunnelNotif OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.18.1.2.17 |
cienaCesGmplsNotifTransitTunnelTableTable of notification objects required for transit tunnel
notification. SEQUENCE OF CienaCesGmplsNotifTransitTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.17.1 |
cienaCesGmplsNotifTransitTunnelEntryAn entry (conceptual row) in the cienaCesGmplsNotifTransitTunnelTable.
No Get, GetNext or Set is allowed on this table. CienaCesGmplsNotifTransitTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1 |
cienaCesGmplsNotifTransitTunnelIndexTunnel index of the transit tunnel associated with the
notification.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.1 |
cienaCesGmplsNotifTransitTunnelTypeTransit tunnel type of the transit tunnel associated with the
notification.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.2 |
cienaCesGmplsNotifTransitTunnelNameThis represents the transit tunnel name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.3 |
cienaCesGmplsNotifTransitTunnelAdminStateAdministrative state of the transit tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.4 |
cienaCesGmplsNotifTransitTunnelOperStateOperational state of the transit tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.5 |
cienaCesGmplsNotifTransitTunnelOamFaultedIndication if the tunnel has Oam fault.ro TunnelOamFault .1.3.6.1.4.1.1271.2.1.18.1.2.17.1.1.6 |
cienaCesGmplsAssociatedTunnelNotif OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.18.1.2.18 |
cienaCesGmplsNotifAssociatedTunnelTableTable of notification objects required for associated tunnel
notification. SEQUENCE OF CienaCesGmplsNotifAssociatedTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.18.1 |
cienaCesGmplsNotifAssociatedTunnelEntryAn entry (conceptual row) in the
cienaCesGmplsNotifAssociatedTunnelTable. No Get, GetNext or Set is
allowed on this table. CienaCesGmplsNotifAssociatedTunnelEntry .1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1 |
cienaCesGmplsNotifAssociatedTunnelIndexTunnel index of the associated tunnel associated with the
notification.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.1 |
cienaCesGmplsNotifAssociatedTunnelTypeAssociated tunnel type of the associated tunnel associated with the
notification.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.2 |
cienaCesGmplsNotifAssociatedTunnelNameThis represents the associated tunnel name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.3 |
cienaCesGmplsNotifAssociatedTunnelAdminStateAdministrative state of the associated tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.4 |
cienaCesGmplsNotifAssociatedTunnelOperStateOperational state of the associated tunnel.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.5 |
cienaCesGmplsNotifAssociatedTunnelAisFaultedReplaced by cienaCesGmplsNotifAssociatedTunnelOamFaultedroobsolete TunnelAisFault .1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.6 |
cienaCesGmplsNotifAssociatedTunnelFaultedNodeIdIP address of the node with the AIS fault.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.7 |
cienaCesGmplsNotifAssociatedTunnelFarEndLerIdIP address of the far end LER for the tunne with the AIS fault.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.8 |
cienaCesGmplsNotifAssociatedTunnelOamFaultedIndication if the tunnel has Oam fault.ro TunnelOamFault .1.3.6.1.4.1.1271.2.1.18.1.2.18.1.1.9 |
cienaCesGmplsEncapTunnelGrpNotif OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.18.1.2.19 |
cienaCesGmplsNotifEncapTunnelGrpTableTable of notification objects required for encap tunnel group
notification. SEQUENCE OF CienaCesGmplsNotifEncapTunnelGrpEntry .1.3.6.1.4.1.1271.2.1.18.1.2.19.1 |
cienaCesGmplsNotifEncapTunnelGrpEntryAn entry (conceptual row) in the cienaCesGmplsNotifEncapTunnelGrpTable.
No Get, GetNext or Set is allowed on this table. CienaCesGmplsNotifEncapTunnelGrpEntry .1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1 |
cienaCesGmplsNotifEncapTunnelGrpIndexTunnel group index of the encap tunnel associated with the
notification.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1.1 |
cienaCesGmplsNotifEncapTunnelGrpNameTunnel group name of the encap tunnel associated with the
notification.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1.2 |
cienaCesGmplsNotifEncapTunnelGrpActiveEncapTunlIndexActive Encap Tunnel index of the tunnel group associated with the
notification.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1.3 |
cienaCesGmplsNotifEncapTunnelGrpActiveEncapTunlNameActive Encap Tunnel name of the Tunnel group associated with the
notification.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1.4 |
cienaCesGmplsNotifEncapTunnelGrpActiveEncapTunlTypeEncap tunnel type of the encap tunnel associated with the
notification.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.19.1.1.5 |
cienaCesGmplsDecapTunnelGrpNotif OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.18.1.2.20 |
cienaCesGmplsNotifDecapTunnelGrpTableTable of notification objects required for decap tunnel group
notification. SEQUENCE OF CienaCesGmplsNotifDecapTunnelGrpEntry .1.3.6.1.4.1.1271.2.1.18.1.2.20.1 |
cienaCesGmplsNotifDecapTunnelGrpEntryAn entry(conceptual row) in the cienaCesGmplsNotifDecapTunnelGrpTable.
No Get, GetNext or Set is allowed on this table. CienaCesGmplsNotifDecapTunnelGrpEntry .1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1 |
cienaCesGmplsNotifDecapTunnelGrpIndexTunnel group index of the decap tunnel associated with the
notification.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1.1 |
cienaCesGmplsNotifDecapTunnelGrpNameTunnel group name of the decap tunnel associated with the
notification.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1.2 |
cienaCesGmplsNotifDecapTunnelGrpActiveDecapTunlIndexActive Decap Tunnel index of the tunnel group associated with the
notification.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1.3 |
cienaCesGmplsNotifDecapTunnelGrpActiveDecapTunlNameActive Decap Tunnel name of the Tunnel group associated with the
notification.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1.4 |
cienaCesGmplsNotifDecapTunnelGrpActiveDecapTunlTypeDecap tunnel type of the decap tunnel associated with the
notification.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.2.20.1.1.5 |
cienaCesGmplsTunnelAisFaultErrorNotif OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.18.1.2.21 |
cienaCesGmplsNotifTunnelAisFaultErrorTableTable of notification objects required for tunnel Ais Fault error
notification. SEQUENCE OF CienaCesGmplsNotifTunnelAisFaultErrorEntry .1.3.6.1.4.1.1271.2.1.18.1.2.21.1 |
cienaCesGmplsNotifTunnelAisFaultErrorEntryAn entry (conceptual row) in the
cienaCesGmplsNotifTunnelAisFaultErrorTable No Get, GetNext or Set is
allowed on this table. CienaCesGmplsNotifTunnelAisFaultErrorEntry .1.3.6.1.4.1.1271.2.1.18.1.2.21.1.1 |
cienaCesGmplsNotifTunnelDecapLabelDecap label associated with the notification.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.2.21.1.1.1 |
cienaCesGmplsNotifTunnelErrorMsgThis represents the fault error message for decap
label associated with the notificationro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.2.21.1.1.2 |
cienaCesMplsGlobal OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.18.1.3 |
cienaCesMplsAttrs OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.18.1.3.1 |
cienaCesMplsGlobalStaticAdminLabelRangeStartThe beginning of the static administrative label range. There cannot be any
overlap between static and dynamic label ranges.
Setting this object does not become effective until the device is rebooted.ro Unsigned32 ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.3.1.1 |
cienaCesMplsGlobalStaticAdminLabelRangeEndThe end of the static administrative label range. There cannot be any overlap between
static and dynamic label ranges.
Setting this object does not become effective until the device is rebooted.ro Unsigned32 ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.3.1.2 |
cienaCesMplsGlobalStaticOperLabelRangeStartThe beginning of the static operational label range. There cannot be any overlap between
static and dynamic label ranges.ro Unsigned32 ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.3.1.3 |
cienaCesMplsGlobalStaticOperLabelRangeEndThe end of the static operational label range. There cannot be any overlap between
static and dynamic label ranges.ro Unsigned32 ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.3.1.4 |
cienaCesMplsGlobalDynamicAdminLabelRangeStartThe beginning of the dynamic administrative label range. There cannot be any overlap between
static and dynamic label ranges.ro Unsigned32 ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.3.1.5 |
cienaCesMplsGlobalDynamicAdminLabelRangeEndThe end of the dynamic administrative label range. There cannot be any overlap between
static and dynamic label ranges.ro Unsigned32 ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.3.1.6 |
cienaCesMplsGlobalDynamicOperLabelRangeStartThe beginning of the dynamic operational label range. There cannot be any overlap between
static and dynamic label ranges.ro Unsigned32 ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.3.1.7 |
cienaCesMplsGlobalDynamicOperLabelRangeEndThe end of the dynamic operational label range. There cannot be any overlap between
static and dynamic label ranges.ro Unsigned32 ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.3.1.8 |
cienaCesMplsGlobalStaticAdminTunnelLabelRangeStartThe beginning of the static tunnel administrative label range. There cannot be any
overlap between static and dynamic label ranges.
Setting this object does not become effective until the device is rebooted.ro Unsigned32 ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.3.1.9 |
cienaCesMplsGlobalStaticAdminTunnelLabelRangeEndThe end of the static tunnel administrative label range. There cannot be any overlap between
static and dynamic label ranges.
Setting this object does not become effective until the device is rebooted.ro Unsigned32 ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.3.1.10 |
cienaCesMplsGlobalStaticOperTunnelLabelRangeStartThe beginning of the static tunnel operational label range. There cannot be any overlap between
static and dynamic label ranges.ro Unsigned32 ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.3.1.11 |
cienaCesMplsGlobalStaticOperTunnelLabelRangeEndThe end of the static tunnel operational label range. There cannot be any overlap between
static and dynamic label ranges.ro Unsigned32 ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.3.1.12 |
cienaCesMplsGlobalStaticAdminVcLabelRangeStartThe beginning of the static VC administrative label range. There cannot be any
overlap between static and dynamic label ranges.
Setting this object does not become effective until the device is rebooted.ro Unsigned32 ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.3.1.13 |
cienaCesMplsGlobalStaticAdminVcLabelRangeEndThe end of the static VC administrative label range. There cannot be any overlap between
static and dynamic label ranges.
Setting this object does not become effective until the device is rebooted.ro Unsigned32 ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.3.1.14 |
cienaCesMplsGlobalStaticOperVcLabelRangeStartThe beginning of the static VC operational label range. There cannot be any overlap between
static and dynamic label ranges.ro Unsigned32 ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.3.1.15 |
cienaCesMplsGlobalStaticOperVcLabelRangeEndThe end of the static VC operational label range. There cannot be any overlap between
static and dynamic label ranges.ro Unsigned32 ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.3.1.16 |
cienaCesMplsGlobalNextFreeStaticVcLabelThe next free static VC label. There cannot be any overlap between
static and dynamic label ranges.ro Unsigned32 ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.3.1.17 |
cienaCesMplsTunnelCosProfileTableMpls cos-profile table. SEQUENCE OF CienaCesMplsTunnelCosProfileEntry .1.3.6.1.4.1.1271.2.1.18.1.3.2 |
cienaCesMplsTunnelCosProfileEntryMpls cos-profile table entry. CienaCesMplsTunnelCosProfileEntry .1.3.6.1.4.1.1271.2.1.18.1.3.2.1 |
cienaCesMplsTunnelCosProfileIndexUnique index for Mpls tunnel Cos profile. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.3.2.1.1 |
cienaCesMplsTunnelCosProfileNameMpls tunnel Cos profile namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.3.2.1.2 |
cienaCesMplsTunnelFrmCosPolicyFrame CoS policy of the tunnel.ro FCosPolicy .1.3.6.1.4.1.1271.2.1.18.1.3.2.1.3 |
cienaCesMplsTunnelFrmCosMapIdThe frame CoS map ID of tunnel. This value is valid if the
frame CoS policy selected for the tunnel is rcos-mapped.ro INTEGER .1.3.6.1.4.1.1271.2.1.18.1.3.2.1.4 |
cienaCesMplsTunnelFrmCosMapNameMpls tunnel frame cos Map namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.3.2.1.5 |
cienaCesMplsTunnelFixedTCIf the frame CoS policy for the tunnel is fixed, this value is used
for MPLS encapsulation.ro Unsigned32 (0..7 ) .1.3.6.1.4.1.1271.2.1.18.1.3.2.1.6 |
cienaCesMplsTunnelRcosPolicyResolved CoS policy of the tunnel.ro RCosPolicy .1.3.6.1.4.1.1271.2.1.18.1.3.2.1.7 |
cienaCesMplsTunnelRcosMapNameMpls tunnel resolved cos Map name. This object is valid only for 39XX and
51XX platformsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.3.2.1.8 |
cienaCesMplsTunnelRCosMapIdThe resolved CoS map ID of the tunnel. This value is valid if the
resolved CoS policy selected for the tunnel is rcos-mapped.
This object is valid only for 39XX and 51XX platformsro INTEGER .1.3.6.1.4.1.1271.2.1.18.1.3.2.1.9 |
cienaCesMplsTunnelRcosProfileNameMpls Tunnel resolved cos Profile name.
This object is valid only for 87XX platformsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.3.2.1.10 |
cienaCesMplsTunnelRCosProfileIdThe resolved Cos profile ID of the Tunnel.
This value is valid if the resolved Cos policy
selected for the pseudowire is rcos-mapped.
This object is valid only for 87XX platformsro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.3.2.1.11 |
cienaCesMplsGlobalTunnelPath OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.18.1.3.3 |
cienaCesMplsGlobalTunnelPathTableThe (conceptual) table listing the MPLS tunnel paths.
To create an entry in the tunnel path table,
cienaCesMplsGlobalTunnelPathName and cienaCesMplsGlobalTunnelPathRowStatus
must both be specified. SEQUENCE OF CienaCesMplsGlobalTunnelPathEntry .1.3.6.1.4.1.1271.2.1.18.1.3.3.1 |
cienaCesMplsGlobalTunnelPathEntryAn entry in the tunnel path table. CienaCesMplsGlobalTunnelPathEntry .1.3.6.1.4.1.1271.2.1.18.1.3.3.1.1 |
cienaCesMplsGlobalTunnelPathIndexA unique index in the path entry table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.3.3.1.1.1 |
cienaCesMplsGlobalTunnelPathNameName associated with the path.ro DisplayString (SIZE ( 1..31) ) .1.3.6.1.4.1.1271.2.1.18.1.3.3.1.1.2 |
cienaCesMplsGlobalTunnelPathUseCountIndicates the number of encap tunnels that are using this path.ro Counter32 .1.3.6.1.4.1.1271.2.1.18.1.3.3.1.1.3 |
cienaCesMplsGlobalTunnelPathHopTableThe (conceptual) table listing the MPLS tunnel path hop.
To create an entry in the path-hop table, cienaCesMplsGlobalTunnelPathHopIpAddr
and cienaCesMplsGlobalTunnelPathHopRowStatus must both be specified. SEQUENCE OF CienaCesMplsGlobalTunnelPathHopEntry .1.3.6.1.4.1.1271.2.1.18.1.3.3.2 |
cienaCesMplsGlobalTunnelPathHopEntryA tunnel hop entry. CienaCesMplsGlobalTunnelPathHopEntry .1.3.6.1.4.1.1271.2.1.18.1.3.3.2.1 |
cienaCesMplsGlobalTunnelPathHopIndexUnique index in the path hop table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.3.3.2.1.1 |
cienaCesMplsGlobalTunnelPathHopIpAddrIP address associated with this hop. This object cannot be modified once the path hop is created.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.3.3.2.1.2 |
cienaCesMplsGlobalTunnelPathHopTypeIndidcates the hop type of the path member. This object cannot be
modified once the path hop is created.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.3.3.2.1.3 |
cienaCesMplsGlobalFreeStaticTunnelLabelTableMpls Free static Tunnel Label table. SEQUENCE OF CienaCesMplsGlobalFreeStaticTunnelLabelEntry .1.3.6.1.4.1.1271.2.1.18.1.3.4 |
cienaCesMplsGlobalFreeStaticTunnelLabelEntryMpls Free static Tunnel Label table. CienaCesMplsGlobalFreeStaticTunnelLabelEntry .1.3.6.1.4.1.1271.2.1.18.1.3.4.1 |
cienaCesMplsGlobalFreeStaticTunnelLabelIndexUnique index for Mpls Free static Tunnel Label table. Unsigned32 ( 1..65535) .1.3.6.1.4.1.1271.2.1.18.1.3.4.1.1 |
cienaCesMplsGlobalFreeStaticTunnelLabelMpls Free static Tunnel Label.ro Unsigned32 ( 16..1048575) .1.3.6.1.4.1.1271.2.1.18.1.3.4.1.2 |
cienaCesMplsPw OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.18.1.4 |
cienaCesMplsPwTableThe (conceptual) table listing the MPLS pseudo wires. SEQUENCE OF CienaCesMplsPwEntry .1.3.6.1.4.1.1271.2.1.18.1.4.1 |
cienaCesMplsPwEntryThis represents an entry of the MPLS pseudowire table. CienaCesMplsPwEntry .1.3.6.1.4.1.1271.2.1.18.1.4.1.1 |
cienaCesMplsPwIndexUnique index in the table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.1 |
cienaCesMplsPwSignallingTypeSpecifies Pw signalling typero Enumeration .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.2 |
cienaCesMplsPwIdThis represents the unique id that is signalled in LDPro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.3 |
cienaCesMplsPwNameThis represents the pseudowire namero DisplayString .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.4 |
cienaCesMplsPwCustomerNameThis represents the customer namero DisplayString .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.5 |
cienaCesMplsPwAdminStateThis represents the pseudowire administrative statusro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.6 |
cienaCesMplsPwOperStateThis represents the pseudowire operational statusro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.7 |
cienaCesMplsPwPeerIpAddrPeer Ip address of the pseudowirero IpAddress .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.8 |
cienaCesMplsPwInLabelIndicates the inbound label of the pseudowirero Integer32 (-1.. 1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.9 |
cienaCesMplsPwOutLabelIndicates the outbound label of the pseudowirero Integer32 (-1.. 1048575 ) .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.10 |
cienaCesMplsPwStatusTlvThis represents whether the pseudowire status tlv is turned on or offro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.11 |
cienaCesMplsPwRefreshStatusIntvlThis represents the refresh interval for status tlv. This is only
applicable for static Pseudowire. For dynamic Pseudowire this is
displayed as 0.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.12 |
cienaCesMplsPwLocalFaultThis represents the pseudowire local faultro VCStatus .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.13 |
cienaCesMplsPwRemoteFaultThis represents the pseudowire remote faultro VCStatus .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.14 |
cienaCesMplsPwMtuIndicates the pseudowire mturo Unsigned32 (1500.. 9128 ) .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.15 |
cienaCesMplsPwTypeThis represents the pseudowire type raw or taggedro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.16 |
cienaCesMplsPwModeThis represents the pseudowire mode whether it is mesh, spoke, or
a MS-PW segmentro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.17 |
cienaCesMplsPwCoSProfileNameThis represents the cos profile name that is being used by
pseudowirero DisplayString .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.18 |
cienaCesMplsPwCoSProfileIndexThis represents the index in cienaCesMplsPwCosProfile tablero Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.19 |
cienaCesMplsPwEgressL2PtTransformThis represents the pseudowire L2PT transform for
classified L2 CFT control framesro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.20 |
cienaCesMplsPwVccVProfileNameThis represents the vccv profile name that is being used by
pseudowirero DisplayString .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.21 |
cienaCesMplsPwVccVProfileIndexThis represents the index in cienaCesMplsPwVccvProfile tablero Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.22 |
cienaCesMplsPwLocalCcCvThis represents the CC/CV configured on the local pseudowirero DisplayString .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.23 |
cienaCesMplsPwRemoteCcCvThis represents the CC/CV configured on the remote pseudowirero DisplayString .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.24 |
cienaCesMplsPwOperatingCcCvThis represents the negotiated/operating CC/CVro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.25 |
cienaCesMplsPwBlockingSpecifies whether pseudowire is blocking or forwardingro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.26 |
cienaCesMplsPwVifIndexThis represents the Vif/tunnel group that is being used
for the pseudowirero Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.27 |
cienaCesMplsPwConfigTunnelNameThis represents the configured transport tunnel name
for the pseudowirero DisplayString .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.28 |
cienaCesMplsPwConfigTunnelTypeThis represents the configured transport tunnel type
for the pseudowirero TunnelType .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.29 |
cienaCesMplsPwConfigTunnelIndexSpecifies the configured transport tunnel index in one of the
cienaCesMplsTunnel/cienaCesGmplsTunnel tables for
the pseudowirero Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.30 |
cienaCesMplsPwActiveTunnelNameThis represents the active transport tunnel name
for the pseudowirero DisplayString .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.31 |
cienaCesMplsPwActiveTunnelTypeThis represents the active transport tunnel type
for the pseudo wire. This would be the same as
configured tunnel typero TunnelType .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.32 |
cienaCesMplsPwActiveTunnelIndexSpecifies the active transport tunnel index in one of the
cienaCesMplsTunnel/cienaCesGmplsTunnel tables for
the pseudowirero Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.33 |
cienaCesMplsPwRoleThis represents the pseudowire role whether it is a
protecting or primary pseudowirerodeprecated Enumeration .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.34 |
cienaCesMplsPwPrimaryPwNameThis represents the primary pseudowire name if
this is a secondary pseudowirero DisplayString .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.35 |
cienaCesMplsPwPrimaryPwIndexThis represents the primary pseudowire index in
cienaCesMplsPw table if this is a secondary pseudowirero Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.36 |
cienaCesMplsPwVsIndexThis represents the virtual switch index in the
virtual switch MIB tablero Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.37 |
cienaCesServiceDelimiterVIDThis represents the service delimiter VID. This object
is valid only for 39XX and 51XX platformsrodeprecated Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.38 |
cienaCesServiceDelimiterTPIDThis represents the service delimiter TPID. This object
is valid only for 39XX and 51XX platformsrodeprecated Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.39 |
cienaCesMplsPwReversionThis represents whether the Pseudowire Reversion is turned on or off.
With the Reversion turned on, when the Primary Pseudowire has recovered
from earlier failure, it will be held down for a period of
cienaCesMplsPwRevertTime(sec) before the switchover from the Backup
Pseudowire to Primary Pseudowire takes place. With the Reversion turned
off, the user must use manual switchover command to perform a
switchover back to the Primary Pseudowirero Enumeration .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.40 |
cienaCesMplsPwRevertTimeThis represents the Reversion Hold-time(in seconds) on the Primary
Pseudowire. When the Primary Pseudowire has recovered from earlier
failure, it will be held down for the length of this hold time. Once
the time has elapsed, and if the Primary Pseudowire does not
encountered any more failure, there will be a switchover from the
Backup Pseudowire back to the Primary Pseudowirero Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.41 |
cienaCesMplsPwProtectionRoleThis represents the role of the pseudowire in a Protection bundle.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.42 |
cienaCesMplsPwProtectionStateThis represents the pseudowire protection state. It only applies to
those pseudowires in the protection bundle. For stand alone pseudowire
this has no meaning and is reflected as n/a in this objectro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.43 |
cienaCesMplsPwVsNameThis represents the virtual switch name to which the pseudowire is
attached.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.44 |
cienaCesMplsPwStatusQueryThis represents whether the pseudowire status query is enabled.
With the status query enabled, the pseudowire is able to query
the remote status when it comes up and the remote status is unknown.ro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.45 |
cienaCesMplsMsPwPeerPwNameThis represents the peer pseudowire name if this is a MS-PW.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.46 |
cienaCesMplsMsPwPeerPwIndexThis represents the peer pseudowire index if this is a MS-PW.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.47 |
cienaCesMplsPwIdInRemoteFaultThis represents the PW Id in the SP-PE TLV of the remote Statusro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.48 |
cienaCesMplsLocalIpInRemoteFaultLocal Ip address in the SP-PE TLV of the remote Statusro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.49 |
cienaCesMplsRemoteIpInRemoteFaultRemote Ip address in the SP-PE TLV of the remote Statusro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.50 |
cienaCesMplsPwFaultToNextHopThis represents the aggregated MS-PW faults sent to the next hopro VCStatus .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.51 |
cienaCesMplsPwIdInFaultToNextHopThis represents the PW Id in the SP-PE TLV sent to the next hopro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.52 |
cienaCesMplsLocalIpInFaultToNextHopLocal Ip address in the SP-PE TLV sent to the next hopro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.53 |
cienaCesMplsRemoteIpInFaultToNextHopRemote Ip address in the SP-PE TLV sent to the next hopro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.54 |
cienaCesMplsPwConfigBandwidthThis represents the configured Bandwidth(in kbps) of pseudowirero MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.55 |
cienaCesMplsPwOperBandwidthThis represents the operational Bandwidth(in kbps) of pseudowirero MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.56 |
cienaCesMplsPwBandwidthStateThis represents the Bandwidth state of pseudowirero Enumeration .1.3.6.1.4.1.1271.2.1.18.1.4.1.1.57 |
cienaCesMplsPwCosProfileTableThe (conceptual) table listing the MPLS pseudowire cos profiles. SEQUENCE OF CienaCesMplsPwCosProfileEntry .1.3.6.1.4.1.1271.2.1.18.1.4.2 |
cienaCesMplsPwCosProfileEntryThis represents an entry of the MPLS pseudowire Cos profile table. CienaCesMplsPwCosProfileEntry .1.3.6.1.4.1.1271.2.1.18.1.4.2.1 |
cienaCesMplsPwCosProfileIndexUnique index for Mpls Pw Cos profile. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.2.1.1 |
cienaCesMplsPwCosProfileNameMpls pseudowire Cos profile namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.4.2.1.2 |
cienaCesMplsPwCosProfileFrmCosPolicyFrame CoS policy of the pseudowirero FCosPolicy .1.3.6.1.4.1.1271.2.1.18.1.4.2.1.3 |
cienaCesMplsPwCosProfileFrmCosMapIdThe frame CoS map ID of pseudo wire.
This value is valid if the frame Cos policy
selected for the pseudowire is rcos-mappedro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.2.1.4 |
cienaCesMplsPwCosProfileFrmCosMapNameMpls pseudowire frame cos Map namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.4.2.1.5 |
cienaCesMplsPwCosProfileFixedTCIf the frame CoS policy for the pseudowire
is fixed, this value is used for MPLS
encapsulation.ro Unsigned32 (0..7 ) .1.3.6.1.4.1.1271.2.1.18.1.4.2.1.6 |
cienaCesMplsPwCosProfileRcosPolicyResolved CoS policy of the pseudowirero RCosPolicy .1.3.6.1.4.1.1271.2.1.18.1.4.2.1.7 |
cienaCesMplsPwCosProfileRcosMapNameMpls pseudowire resolved cos Map name. This object
is valid only for 39XX and 51XX platformsro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.4.2.1.8 |
cienaCesMplsPwCosProfileRCosMapIdThe resolved Cos map ID of the pseudo wire.
This value is valid if the resolved Cos policy
selected for the pseudowire is rcos-mapped.
This object is valid only for 39XX and 51XX platformsro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.2.1.9 |
cienaCesMplsPwCosProfileRcosProfileNameMpls pseudowire resolved cos Profile name.
This object is valid only for 87XXro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.4.2.1.10 |
cienaCesMplsPwCosProfileRCosProfileIdThe resolved Cos profile ID of the pseudo wire.
This value is valid if the resolved Cos policy
selected for the pseudowire is rcos-mapped.
This object is valid only for 87XXro INTEGER .1.3.6.1.4.1.1271.2.1.18.1.4.2.1.11 |
cienaCesMplsPwCosProfileRCosFixedIf the resolved CoS policy for the pseudowire
is fixed, this value is usedro Unsigned32 (0..7 ) .1.3.6.1.4.1.1271.2.1.18.1.4.2.1.12 |
cienaCesMplsPwVccvProfileTableThe (conceptual) table listing the MPLS pseudowire
Vccv profiles. SEQUENCE OF CienaCesMplsPwVccvProfileEntry .1.3.6.1.4.1.1271.2.1.18.1.4.3 |
cienaCesMplsPwVccvProfileEntryThis represents an entry of the MPLS pseudowire Vccv profile table. CienaCesMplsPwVccvProfileEntry .1.3.6.1.4.1.1271.2.1.18.1.4.3.1 |
cienaCesMplsPwVccvProfileIndexUnique index for Mpls Pw Vccv profile. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.3.1.1 |
cienaCesMplsPwVccvProfileNameMpls pseudowire Vccv profile namero DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.4.3.1.2 |
cienaCesMplsPwVccvProfileCcTtlExpThis represents the pseudowire TTL-expiry VCCV control
channel (CC Type-3) operationro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.4.3.1.3 |
cienaCesMplsPwVccvProfileCcCienaOobThis represents the pseudowire CIENA proprietary out-of-band
VCCV control channel (CC Type-4) operationro Enumeration .1.3.6.1.4.1.1271.2.1.18.1.4.3.1.4 |
cienaCesMplsPwNotif OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.18.1.4.4 |
cienaCesMplsPwNotifTableTable of notification objects required for pseudowire notification. SEQUENCE OF CienaCesMplsPwNotifEntry .1.3.6.1.4.1.1271.2.1.18.1.4.4.1 |
cienaCesMplsPwNotifEntryAn entry (conceptual row) in the cienaCesMplsPwNotifTable.
No Get, GetNext or Set is allowed on this table. CienaCesMplsPwNotifEntry .1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1 |
cienaCesMplsPwNotifPwIndexUnique pseudowire index in the PW tablero Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.1 |
cienaCesMplsPwNotifPwIdUnique Pseudowire ID used to identify the PW in the signaling. For the
static PW this represents the locally configured value.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.2 |
cienaCesMplsPwNotifPwNameThis represents the locally configured PW name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.3 |
cienaCesMplsPwNotifPwPeerIpAddrThis represents the IP address of the Peer on the remote end of the PW.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.4 |
cienaCesMplsPwNotifPriPwIdThis represents the PW Id of the primary PW.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.5 |
cienaCesMplsPwNotifPriPwNameThis represents the PW name of the primary PW.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.6 |
cienaCesMplsPwNotifPriPwPeerIpAddrThis represents the IP address of the Peer on the remote end of the
primary PW.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.7 |
cienaCesMplsPwNotifActPwIndexUnique pseudowire index in the PW tablero Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.8 |
cienaCesMplsPwNotifActPwIdThis represents the PW Id of the active PW.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.9 |
cienaCesMplsPwNotifActPwNameThis represents the PW name of the active PW.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.10 |
cienaCesMplsPwNotifActPwPeerIpAddrThis represents the IP address of the Peer on the remote end of the
active PW.ro IpAddress .1.3.6.1.4.1.1271.2.1.18.1.4.4.1.1.11 |
cienaCesMplsPWTrafficStatsTableMpls PW Traffic Statistics table.
The attributes in this table are supported only on specific platforms. SEQUENCE OF CienaCesMplsPWTrafficStatsEntry .1.3.6.1.4.1.1271.2.1.18.1.4.5 |
cienaCesMplsPWTrafficStatsEntryMpls PW Traffic Statistics table entry. CienaCesMplsPWTrafficStatsEntry .1.3.6.1.4.1.1271.2.1.18.1.4.5.1 |
cienaCesMplsPWTrafficStatsPWIndexUnique index for Mpls PW Traffic Statistics table. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.5.1.1 |
cienaCesMplsPWTrafficStatsIncomingPacketsThe number of incoming packets for the given PW.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.5.1.2 |
cienaCesMplsPWTrafficStatsOutgoingPacketsThe number of outgoing packets for the given PW.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.5.1.3 |
cienaCesMplsPWTrafficStatsIncomingBytesThe number of incoming bytes for the given PW.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.5.1.4 |
cienaCesMplsPWTrafficStatsOutgoingBytesThe number of outgoing bytes for the given PW.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.4.5.1.5 |
cienaCesMplsTe OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.18.1.5 |
cienaCesTeLinkTableThis table captures the TE-link entries along with their
respective attributes. SEQUENCE OF CienaCesTeLinkEntry .1.3.6.1.4.1.1271.2.1.18.1.5.1 |
cienaCesTeLinkEntryThis represents an entry for the TE-Link interface CienaCesTeLinkEntry .1.3.6.1.4.1.1271.2.1.18.1.5.1.1 |
cienaCesTeIfIndexThis represents the unique index for TE-Interface. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.1 |
cienaCesTeInterfaceNameThis represents the TE Interface name.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.2 |
cienaCesTeLinkMetricLink cost of the TE-Interface.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.3 |
cienaCesTeResourceColorGroupIndexResource Color Group Index this TE-link is associated to.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.4 |
cienaCesTeResourceColorBitMaskThis represents individual bit for Resource Color which will be
set in Resource Color Group.ro OCTET STRING .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.5 |
cienaCesMplsClassProfIndexClass Profile Index this TE-link is associated to.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.6 |
cienaCesTeLinkModeTE mode of the TE-Interface.ro TEMode .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.7 |
cienaCesTeLinkSrlgCountThis identifies the total number of SRLGs configured on
this TE link.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.8 |
cienaCesTeLinkMaximumBandwidthMaximum TE-link Bandwidth(in kbps).
This is same as the port bandwidth on which this TE-link
is createdro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.9 |
cienaCesTeLinkMaximumReservableBandwidthMaximum Reservable bandwidth(in kbps) on this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.10 |
cienaCesTeLinkTotalBandwidthPrio0Total Priority 0 Bandwidth(in kbps) allocated in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.11 |
cienaCesTeLinkReservedBandwidthPrio0Reserved Priority 0 Bandwidth(in kbps) in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.12 |
cienaCesTeLinkUnReservedBandwidthPrio0UnReserved Priority 0 Bandwidth(in kbps) in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.13 |
cienaCesTeLinkTotalBandwidthPrio1Total Priority 1 Bandwidth(in kbps) allocated in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.14 |
cienaCesTeLinkReservedBandwidthPrio1Reserved Priority 1 Bandwidth(in kbps) in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.15 |
cienaCesTeLinkUnReservedBandwidthPrio1UnReserved Priority 1 Bandwidth(in kbps) in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.16 |
cienaCesTeLinkTotalBandwidthPrio2Total Priority 2 Bandwidth(in kbps) allocated in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.17 |
cienaCesTeLinkReservedBandwidthPrio2Reserved Priority 2 Bandwidth(in kbps) in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.18 |
cienaCesTeLinkUnReservedBandwidthPrio2UnReserved Priority 2 Bandwidth(in kbps) in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.19 |
cienaCesTeLinkTotalBandwidthPrio3Total Priority 3 Bandwidth(in kbps) allocated in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.20 |
cienaCesTeLinkReservedBandwidthPrio3Reserved Priority 3 Bandwidth(in kbps) in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.21 |
cienaCesTeLinkUnReservedBandwidthPrio3UnReserved Priority 3 Bandwidth(in kbps) in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.22 |
cienaCesTeLinkTotalBandwidthPrio4Total Priority 4 Bandwidth(in kbps) allocated in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.23 |
cienaCesTeLinkReservedBandwidthPrio4Reserved Priority 4 Bandwidth(in kbps) in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.24 |
cienaCesTeLinkUnReservedBandwidthPrio4UnReserved Priority 4 Bandwidth(in kbps) in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.25 |
cienaCesTeLinkTotalBandwidthPrio5Total Priority 5 Bandwidth(in kbps) allocated in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.26 |
cienaCesTeLinkReservedBandwidthPrio5Reserved Priority 5 Bandwidth(in kbps) in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.27 |
cienaCesTeLinkUnReservedBandwidthPrio5UnReserved Priority 5 Bandwidth(in kbps) in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.28 |
cienaCesTeLinkTotalBandwidthPrio6Total Priority 6 Bandwidth(in kbps) allocated in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.29 |
cienaCesTeLinkReservedBandwidthPrio6Reserved Priority 6 Bandwidth(in kbps) in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.30 |
cienaCesTeLinkUnReservedBandwidthPrio6UnReserved Priority 6 Bandwidth(in kbps) in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.31 |
cienaCesTeLinkTotalBandwidthPrio7Total Priority 7 Bandwidth(in kbps) allocated in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.32 |
cienaCesTeLinkReservedBandwidthPrio7Reserved Priority 7 Bandwidth(in kbps) in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.33 |
cienaCesTeLinkUnReservedBandwidthPrio7UnReserved Priority 7 Bandwidth(in kbps) in this TE-link.ro MplsBitRate .1.3.6.1.4.1.1271.2.1.18.1.5.1.1.34 |
cienaCesTeResourceGrpTableThis table captures the Resource Color Group Template entries. SEQUENCE OF CienaCesTeResGrpEntry .1.3.6.1.4.1.1271.2.1.18.1.5.2 |
cienaCesTeResGrpEntryAn entry in this table exists for each of the Resource
color group template. CienaCesTeResGrpEntry .1.3.6.1.4.1.1271.2.1.18.1.5.2.1 |
cienaCesTeResourceColorGrpIndexThis represents the unique index for Resource Color Group entry.
Index 0 is used to get the colors which are not associated to
any color group cienaCesTeResourceColorsTable Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.5.2.1.1 |
cienaCesTeResourceGrpNameThis represents the name of the Resource Color Group.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.5.2.1.2 |
cienaCesTeResourceColorGroupBitMaskThis represents the bitmask value for colors added to
this Resource Color Group.ro OCTET STRING .1.3.6.1.4.1.1271.2.1.18.1.5.2.1.3 |
cienaCesTeResourceColorGroupUseCountIndicates the number of Tunnels using this MPLS Resource Color
Group.ro Counter32 .1.3.6.1.4.1.1271.2.1.18.1.5.2.1.4 |
cienaCesTeResourceColorsTableThis table captures the Resource Colors entries.
These colors can be associated to any Resource Color Group SEQUENCE OF CienaCesTeResColorEntry .1.3.6.1.4.1.1271.2.1.18.1.5.3 |
cienaCesTeResColorEntryAn entry in this table exists for each of the Resource
colors configured along with its associated Resource Group. CienaCesTeResColorEntry .1.3.6.1.4.1.1271.2.1.18.1.5.3.1 |
cienaCesTeResourceColorIndexThis represents the unique index for Resource Color entry. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.5.3.1.1 |
cienaCesTeResourceColorNameThis represents the name of the Resource Color.ro DisplayString .1.3.6.1.4.1.1271.2.1.18.1.5.3.1.2 |
cienaCesTeResourceColorBitThis represents individual bit for Resource Color which will be
set in Resource Color Group's cienaCesTeResourceColorGroupBitMask.ro OCTET STRING .1.3.6.1.4.1.1271.2.1.18.1.5.3.1.3 |
cienaCesTeResourceColorUseCountIndicates the number of MPLS Resource Groups using this Resource
Color.ro Counter32 .1.3.6.1.4.1.1271.2.1.18.1.5.3.1.4 |
cienaCesTeLinkSrlgTableThis table specifies the SRLGs associated with TE links. SEQUENCE OF CienaCesTeLinkSrlgEntry .1.3.6.1.4.1.1271.2.1.18.1.5.4 |
cienaCesTeLinkSrlgEntryAn entry in this table contains information about an
SRLG associated with a TE link.
An ifEntry in the ifTable must exist before a
teLinkSrlgEntry using the same ifIndex is created.
The ifType of ifEntry must be teLink(200).
If a TE link entry in the ifTable is destroyed, then so
are all of the entries in the teLinkSrlgTable that use the
ifIndex of this TE link. CienaCesTeLinkSrlgEntry .1.3.6.1.4.1.1271.2.1.18.1.5.4.1 |
cienaCesTeLinkSrlgThis identifies an SRLG supported by the TE link. An SRLG is
identified with a 32-bit number that is unique within an IGP
domain. Zero is a valid SRLG number. Unsigned32 .1.3.6.1.4.1.1271.2.1.18.1.5.4.1.1 |
cienaCesTeLinkSrlgStatusThis variable represents the SRLG value status.
Currently we support only active(1) indicating SRLG
is configured.ro SRLGState .1.3.6.1.4.1.1271.2.1.18.1.5.4.1.2 |
cienaCesMplsMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.2.17 |
cienaCesMplsMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.2.17.0 |
cienaCesMplsTunnelOperStateChgTrapThis notification is sent when the operational state of an encap
tunnel changes. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesMplsNotifEncapTunnelIndex,
cienaCesMplsNotifEncapTunnelType, cienaCesMplsNotifEncapTunnelName,
cienaCesMplsNotifEncapTunnelAdminState,
cienaCesMplsNotifEncapTunnelOperState,
cienaCesMplsNotifEncapTunnelOamFaulted,
cienaCesMplsNotifEncapTunnelFaultNodeId. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.17.0.1 |
cienaCesMplsEncapTunnelGrpActiveEncapTunnelChangeThis notification is sent whenever the active encap tunnel in
a tunnel group changes. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.17.0.2 |
cienaCesMplsTransitTunnelOperStateChgTrapThis notification is sent when the operational state of a transit
tunnel changes. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesMplsNotifTransitTunnelIndex,
cienaCesMplsNotifTransitTunnelType, cienaCesMplsNotifTransitTunnelName,
cienaCesMplsNotifTransitTunnelAdminState,
cienaCesMplsNotifTransitTunnelOperState,
cienaCesMplsNotifTransitTunnelOamFaulted. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.17.0.3 |
cienaCesMplsAssociatedTunnelOperStateChgTrapThis notification is sent when the operational state of an associated
tunnel changes. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesMplsNotifAssociatedTunnelIndex,
cienaCesMplsNotifAssociatedTunnelType, cienaCesMplsNotifAssociatedTunnelName,
cienaCesMplsNotifAssociatedTunnelAdminState,
cienaCesMplsNotifAssociatedTunnelOperState,
cienaCesMplsNotifAssociatedTunnelOamFaulted,
cienaCesMplsNotifAssociatedTunnelFaultedNodeId. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.17.0.6 |
cienaCesMplsCacInterfaceThresholdTrapThis notification is sent when LSP bandwith usage exceeds the threshold.
Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesMplsNotifCasInterfaceIndex,
cienaCesMplsNotifCacInterfaceClassType, cienaCesMplsNotifCacInterfaceName,
cienaCesMplsNotifCacInterfaceThreshold. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.17.0.7 |
cienaCesGmplsMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.2.17.1 |
cienaCesGmplsEncapUnidirTunnelOperStateChgTrapThis notification is sent when the operational state of an encap
uni-direction tunnel changes. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesGmplsNotifEncapTunnelIndex,
cienaCesGmplsNotifEncapTunnelType, cienaCesGmplsNotifEncapTunnelName,
cienaCesGmplsNotifEncapTunnelAdminState,
cienaCesGmplsNotifEncapTunnelOperState,
cienaCesGmplsNotifEncapTunnelOamFaulted,
cienaCesGmplsNotifEncapTunnelFaultedNodeId. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.17.1.1 |
cienaCesGmplsEncapCoroutedTunnelOperStateChgTrapThis notification is sent when the operational state of an encap
corouted tunnel changes. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesGmplsNotifEncapTunnelIndex,
cienaCesGmplsNotifEncapTunnelType, cienaCesGmplsNotifEncapTunnelName,
cienaCesGmplsNotifEncapTunnelAdminState,
cienaCesGmplsNotifEncapTunnelOperState,
cienaCesGmplsNotifEncapTunnelOamFaulted,
cienaCesGmplsNotifEncapTunnelFaultedNodeId. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.17.1.2 |
cienaCesGmplsDecapCoroutedTunnelOperStateChgTrapThis notification is sent when the operational state of an decap
corouted tunnel changes. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesGmplsNotifDecapTunnelIndex,
cienaCesGmplsNotifDecapTunnelType, cienaCesGmplsNotifDecapTunnelName,
cienaCesGmplsNotifDecapTunnelAdminState,
cienaCesGmplsNotifDecapTunnelOperState,
cienaCesGmplsNotifDecapTunnelOamFaulted,
cienaCesGmplsNotifDecapTunnelFaultedNodeId. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.17.1.3 |
cienaCesGmplsTransitUnidirTunnelOperStateChgTrapThis notification is sent when the operational state of a transit
uni-direcition tunnel changes. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesGmplsNotifTransitTunnelIndex,
cienaCesGmplsNotifTransitTunnelType, cienaCesGmplsNotifTransitTunnelName,
cienaCesGmplsNotifTransitTunnelAdminState,
cienaCesGmplsNotifTransitTunnelOperState,
cienaCesGmplsNotifTransitTunnelOamFaulted. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.17.1.4 |
cienaCesGmplsTransitCoroutedTunnelOperStateChgTrapThis notification is sent when the operational state of a transit
corouted tunnel changes. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesGmplsNotifTransitTunnelIndex,
cienaCesGmplsNotifTransitTunnelType, cienaCesGmplsNotifTransitTunnelName,
cienaCesGmplsNotifTransitTunnelAdminState,
cienaCesGmplsNotifTransitTunnelOperState,
cienaCesGmplsNotifTransitTunnelOamFaulted. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.17.1.5 |
cienaCesGmplsEncapUnidirTunnelGrpActiveEncapTunnelChangeTrapThis notification is sent whenever the active encap tunnel in
an encap uni-direction tunnel group changes. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.17.1.6 |
cienaCesGmplsEncapCoroutedTunnelGrpActiveEncapTunnelChangeTrapThis notification is sent whenever the active encap tunnel in
an encap corouted tunnel group changes. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.17.1.7 |
cienaCesGmplsDecapCoroutedTunnelGrpActiveDecapTunnelChangeTrapThis notification is sent whenever the active decap tunnel in
a decap corouted tunnel group changes. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.17.1.8 |
cienaCesGmplsAssociatedTunnelOperStateChgTrapThis notification is sent when the operational state of an encap
tunnel changes. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesGmplsNotifAssociatedTunnelIndex,
cienaCesGmplsNotifAssociatedTunnelType, cienaCesGmplsNotifAssociatedTunnelName,
cienaCesGmplsNotifAssociatedTunnelAdminState,
cienaCesGmplsNotifAssociatedTunnelOperState,
cienaCesGmplsNotifAssociatedTunnelOamFaulted,
cienaCesGmplsNotifAssociatedTunnelFaultedNodeId. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.17.1.9 |
cienaCesGmplsEncapCoroutedTunnelAisFaultStateChgTrapThis notification is obsoleted, its functionality is absorbed in the OperState Change
notification. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.17.1.10 |
cienaCesGmplsDecapCoroutedTunnelAisFaultStateChgTrapThis notification is obsoleted, its functionality is absorbed in the OperState Change
notification. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.17.1.11 |
cienaCesGmplsAssociatedTunnelAisFaultStateChgTrapThis notification is obsoleted, its functionality is absorbed in the OperState Change
notification. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.17.1.12 |
cienaCesGmplsTunnelAisFaultErrorTrapThis notification is sent when there is a fault sent for a
LSP whose label is not associated with any tunnel. This will happen
whenever the AIS admin state is disabled for the bidirectional tunnel.
Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesGmplsNotifTunnelDecapLabel,
and cienaCesGmplsNotifTunnelErrorMsg NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.17.1.13 |
cienaCesGmplsEncapTunnelResizeResultTrapThis notification is sent when the encap tunnel auto size is done
Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesGmplsNotifEncapTunnelIndex,
cienaCesGmplsNotifEncapTunnelType, cienaCesGmplsNotifEncapTunnelName,
cienaCesGmplsNotifEncapTunnelResult,
cienaCesGmplsNotifEncapTunnelProtectionRole,
cienaCesGmplsNotifEncapTunnelRequestdBw and
cienaCesGmplsNotifEncapTunnelOperationalBw. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.17.1.14 |
cienaCesGmplsEncapTunnelMbbResultTrapThis notification is sent when the encap tunnel MBB done
Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesGmplsNotifEncapTunnelIndex,
cienaCesGmplsNotifEncapTunnelType, cienaCesGmplsNotifEncapTunnelName,
cienaCesGmplsNotifEncapTunnelResult,
cienaCesGmplsNotifEncapTunnelProtectionRole,
cienaCesGmplsNotifEncapTunnelRequestdBw and
cienaCesGmplsNotifEncapTunnelOperationalBw,
cienaCesGmplsNotifEncapTunnelMbbParentApp. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.17.1.15 |
cienaCesMplsPwMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.2.17.2 |
cienaCesMplsPwDownThis notification is sent when the operational state of a pseudowire
has changed from up to down. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.17.2.1 |
cienaCesMplsPwUpThis notification is sent when the operational state of a pseudowire
has changed from down to up. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.17.2.2 |
cienaCesMplsPwBundleActivePwChangeThis notification is sent when the active member of the pseudowire
bundle has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.17.2.3 |