CIENA-CES-BENCHMARK-MIB
AI MIB Summary
The CIENA-CES-BENCHMARK-MIB enables the monitoring and management of RFC 2544 and ITU-T Y.1564 service benchmark test results on Ciena Carrier Ethernet Service (CES) platforms, specifically tracking throughput, latency, jitter, packet loss, and frame discard metrics during performance validation.
The MIB module for managing RFC2544/Y1564 service benchmark testing.
Main OID:
cienaCesBenchmarkMIB.1.3.6.1.4.1.1271.2.1.39
309
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
309 total| Object Name |
|---|
cienaCesBenchmarkMIBThe MIB module for managing RFC2544/Y1564 service benchmark testing. MODULE-IDENTITY .1.3.6.1.4.1.1271.2.1.39 |
cienaCesBenchmarkMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.39.1 |
cienaCesBenchmarkModule OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.39.1.1 |
cienaCesBenchmarkGlobalObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.39.1.1.1 |
cienaCesBenchmarkGlobalAdminStateAdministrative state of the benchmark feature
at the global level.rw CienaCesBenchmarkAdminState .1.3.6.1.4.1.1271.2.1.39.1.1.1.1 |
cienaCesBenchmarkGlobalGeneratorDefaultEmixSequenceIdDefault EMIX sequence to be used on a test instance
when no EMIX is specified in the test instance
targeted test profile. This applies to generator
test instances only.rw Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.1.2 |
cienaCesBenchmarkGlobalGeneratorDefaultKpiProfileIdDefault KPI profile to be used to analyze the results
of a test instance when no KPI profile is specifed in
the targeted test profile. This applies to generator
test instances only.rw Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.1.3 |
cienaCesBenchmarkGlobalGeneratorDefaultBwAllocProfileIdDefault bandwidth allocation profile to be used with
a test instance when no bandwidth allocation profile is
specified in the targeted test profile. This applies to
generator test instances only.rw Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.1.4 |
cienaCesBenchmarkGlobalPlatformMaxConfigEntitiesMaximum number of entities that can be created on
this platform.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.1.5 |
cienaCesBenchmarkGlobalPlatformMaxConfigTestInstancesMaximum number of test instances that can be created on
this platform.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.1.6 |
cienaCesBenchmarkGlobalPlatformMaxConfigTestProfilesMaximum number of test profiles that can be created on
this platform.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.1.7 |
cienaCesBenchmarkGlobalPlatformMaxConfigKpiProfilesMaximum number of KPI profiles that can be created on
this platform.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.1.8 |
cienaCesBenchmarkGlobalPlatformMaxConfigBwAllocProfilesMaximum number of bandwidth distribution profiles
that can be created on this platform.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.1.9 |
cienaCesBenchmarkGlobalPlatformMaxConfigEmixSequencesMaximum number of EMIX sequences that can be created on
this platform, including the system created ones.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.1.10 |
cienaCesBenchmarkGlobalPlatformMaxSimultaneousRunningTestsMaximum number of test instances that can be running
simultaneously on this platform.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.1.11 |
cienaCesBenchmarkGlobalConfiguredEntitiesNumber of entities currently configured.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.1.12 |
cienaCesBenchmarkGlobalConfiguredTestInstancesNumber of test instances currently configured.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.1.13 |
cienaCesBenchmarkGlobalConfiguredProfilesNumber of test profiles currently configured.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.1.14 |
cienaCesBenchmarkGlobalConfiguredEmixSequencesNumber of EMIX sequences currently configured, including
the system created ones.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.1.15 |
cienaCesBenchmarkGlobalConfiguredKpiProfilesNumber of KPI profiles currently configured.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.1.16 |
cienaCesBenchmarkGlobalConfiguredBwAllocProfilesNumber of bandwidth distribution profiles currently
configured.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.1.17 |
cienaCesBenchmarkGlobalEnabledTestInstancesNumber of test instances currently enabled across
the platform.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.1.18 |
cienaCesBenchmarkGlobalGeneratorRunningTestInstancesNumber of generator test instances currently running
across the platform.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.1.19 |
cienaCesBenchmarkEntityTableTable of benchmark entity entries. SEQUENCE OF CienaCesBenchmarkEntityEntry .1.3.6.1.4.1.1271.2.1.39.1.1.2 |
cienaCesBenchmarkEntityEntryBENCHMARK Entity characteristics. CienaCesBenchmarkEntityEntry .1.3.6.1.4.1.1271.2.1.39.1.1.2.1 |
cienaCesBenchmarkEntityEntryIdEntity unique ID Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.1 |
cienaCesBenchmarkEntityEntryNameName of the benchmark entity as entered when created.rw DisplayString .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.2 |
cienaCesBenchmarkEntityEntryRoleEntity rolerw Enumeration .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.3 |
cienaCesBenchmarkEntityEntryPortIdEntity port under testrw Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.4 |
cienaCesBenchmarkEntityEntryModeEntity moderw Enumeration .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.5 |
cienaCesBenchmarkEntityEntryAdminStateEntity admin state.rw CienaCesBenchmarkAdminState .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.6 |
cienaCesBenchmarkEntityEntryLocalMacThe FPGA internal test port assigned mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.7 |
cienaCesBenchmarkEntityEntrySlotIdThe slot Id of the line module associated
with this entity.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.8 |
cienaCesBenchmarkEntityEntryReflectorVendorTypeIndicator as to what type of equipment is generating the
test traffic on the remote end.rw Enumeration .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.9 |
cienaCesBenchmarkEntityEntryReflectionLevelFor reflector entities, this indicates the minimum reflection
level required. If test traffic is going over an ethernet L2
cloud, l2-only is fine. But if the test traffic is going over
an IP network, the reflector needs to be able to swap L2 and
L3 fields. Depending on the type of IP network, the user
needs to configured IPv4 or IPv6. L2 to L4 will swap MAC
addresses, IP addresses and src and destination L4 port.
Depending on the reflection level required, a different device
is used to implement the reflector.rw Enumeration .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.10 |
cienaCesBenchmarkEntityEntryGeneratorHFrameSizeMaximum frame size that should be generated by the generator
device. This H frame size should to leave enough room for
extra encapsulation bytes that will be pushed onto the
packet by the switch when pushing this test packet out
the network side port.
The generator device will ensure that any frame size list
or EMIX used during the test is adjusted accordinglyrw Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.11 |
cienaCesBenchmarkEntityEntryMaxConfigTestInstancesMaximum number of test instances that can
be configured on this entity.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.12 |
cienaCesBenchmarkEntityEntryMaxSimultaneousTestInstancesMaximum number of test instances that can
be enabled (reflector) or running (generator)
on this entity, given the availability of
hw sessions.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.13 |
cienaCesBenchmarkEntityEntryOperEnabledEntity operational enable/disable. An entity
is operationally enabled when the feature is
enabled, the entity is enabled and at least one
test instance associated with that entity is
enabled (reflector) or running (generator)ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.14 |
cienaCesBenchmarkEntityEntryNumTestInstancesConfiguredNumber of test instances currently configured
on this entity.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.15 |
cienaCesBenchmarkEntityEntryNumTestInstancesEnabledNumber of test instances currently enabled.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.16 |
cienaCesBenchmarkEntityEntryGenNumTestInstancesRunningNumber of test instances currently running.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.17 |
cienaCesBenchmarkEntityEntryBwAvailableBandwidth available for test traffic if
a reflector. Bandwidth remaining for other
test instances to be started if a generator.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.18 |
cienaCesBenchmarkEntityEntryGenBwUsedByRunningTestsBandwidth currently used by test instances
currently running, in Mbps.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.19 |
cienaCesBenchmarkEntityEntryAvailableHwSessionsMaximum number of simultaneous hardware sessions available
on this platform.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.20 |
cienaCesBenchmarkEntityEntryAllocatedHwSessionsThe number of allocated hardware sessionsro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.21 |
cienaCesBenchmarkEntityEntryRowStatusUsed to manage the creation and deletion of the
conceptual rows in this table. To create a row in
this table, set this object to 'createAndGo'.
To delete a row in this table, set this object to
'destroy'. If the entry exists, it is displayed
as 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.22 |
cienaCesBenchmarkEntityEntryClearStatsSet to true to clear all global fpga counters for the given entity.
Clear is only allowed for a reflector if no test instances are
enabled, and for a generator if no test instances are running. The
value is reset to false once the transaction is completed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.23 |
cienaCesBenchmarkEntityEntryReflectorMacValidationThis attribute is only valid for the reflector entity and indicates
whether the reflector verifies that the destination MAC of the test
frames matches the MAC address associated with benchamrk reflector
entity. MAC Validation can only be disabled (False) in out-if-service or
evc/vid-out-of-service mode.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.2.1.24 |
cienaCesBenchmarkEntityStatsTableTable of benchmark entity statistics entries. SEQUENCE OF CienaCesBenchmarkEntityStatsEntry .1.3.6.1.4.1.1271.2.1.39.1.1.3 |
cienaCesBenchmarkEntityStatsEntryBENCHMARK Entity characteristics. CienaCesBenchmarkEntityStatsEntry .1.3.6.1.4.1.1271.2.1.39.1.1.3.1 |
cienaCesBenchmarkEntityStatsEntryClearSet to true to clear all port and/or global fpga
counters for the given entity. Clear is only allowed
for a reflector if no test instances are enabled, and
for a generator if no test instances are running.
The value is reset to False once the transaction is completed.
This has been obsoleted by cienaCesBenchmarkEntityEntryClearStats.rwobsolete TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.1 |
cienaCesBenchmarkEntityStatsEntryPortTxBytesNumber of bytes transmitted by the benchmark portro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.2 |
cienaCesBenchmarkEntityStatsEntryPortTxPktsNumber of packets transmitted by the benchmark portro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.3 |
cienaCesBenchmarkEntityStatsEntryPortTxCrcErrorPktsNumber of packets with CRC errorsro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.4 |
cienaCesBenchmarkEntityStatsEntryPortTxUcastPktsNumber of unicast packets transmitted by the benchmark portro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.5 |
cienaCesBenchmarkEntityStatsEntryPortTxMcastPktsNumber of multicast packets transmitted by the benchmark portro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.6 |
cienaCesBenchmarkEntityStatsEntryPortTxBcastPktsNumber of broadcast packets transmitted by the benchmark portro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.7 |
cienaCesBenchmarkEntityStatsEntryPortRxUndersizePktsThe total number of packets received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise well
formed.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.8 |
cienaCesBenchmarkEntityStatsEntryPortRxOversizePktsThe total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets) and were otherwise
well formed.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.9 |
cienaCesBenchmarkEntityStatsEntryPortRxFragmentsPktsThe total number of packets received that were less
than 64 octets in length (excluding framing bits but
including FCS octets) and had either a bad Frame
Check Sequence (FCS) with an integral number of
octets (FCS Error) or a bad FCS with a non-integral
number of octets (Alignment Error).ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.10 |
cienaCesBenchmarkEntityStatsEntryPortRxJabbersPktsThe total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets), and had either a bad
Frame Check Sequence (FCS) with an integral number
of octets (FCS Error) or a bad FCS with a
non-integral number of octets (Alignment Error).ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.11 |
cienaCesBenchmarkEntityStatsEntryPortTxPausePktsThe transmit pause packets for the port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.12 |
cienaCesBenchmarkEntityStatsEntryPortTxDropPktsThe total number of dropped packets on the benchmark port when
traffic profiles are enabled (311v only).ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.13 |
cienaCesBenchmarkEntityStatsEntryPortTxDiscardPktsThe total number of discarded packets.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.14 |
cienaCesBenchmarkEntityStatsEntryPortTxLOutRangePktsThe transmit length out of range packet count.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.15 |
cienaCesBenchmarkEntityStatsEntryPortTx64OctsPktsNumber of 64-byte packets transmitted on the benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.16 |
cienaCesBenchmarkEntityStatsEntryPortTx65To127PktsNumber of 64 to 127-byte packets transmitted on the
benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.17 |
cienaCesBenchmarkEntityStatsEntryPortTx128To255PktsNumber of 128 to 255-byte packets transmitted on the
benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.18 |
cienaCesBenchmarkEntityStatsEntryPortTx256To511PktsNumber of 256 to 511-byte packets transmitted on the
benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.19 |
cienaCesBenchmarkEntityStatsEntryPortTx512To1023PktsNumber of 512 to 1023-byte packets transmitted on the
benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.20 |
cienaCesBenchmarkEntityStatsEntryPortTx1024To1518PktsNumber of 1024 to 1518-byte packets transmitted on the
benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.21 |
cienaCesBenchmarkEntityStatsEntryPortTx1519To2047PktsNumber of 1519 to 2047-byte packets transmitted on the
benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.22 |
cienaCesBenchmarkEntityStatsEntryPortTx2048To4095PktsNumber of 2048 to 4095-byte packets transmitted on the
benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.23 |
cienaCesBenchmarkEntityStatsEntryPortTx4096To9216PktsNumber of 4096 to 9216-byte packets transmitted on the
benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.24 |
cienaCesBenchmarkEntityStatsEntryPortRxBytesNumber of bytes received on the benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.25 |
cienaCesBenchmarkEntityStatsEntryPortRxPktsNumber of packets received on the benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.26 |
cienaCesBenchmarkEntityStatsEntryPortRxExDeferPktsNumber of excessive deferred packets.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.27 |
cienaCesBenchmarkEntityStatsEntryPortRxDeferPktsNumber of deferred packets.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.28 |
cienaCesBenchmarkEntityStatsEntryPortRxGiantPktsNumber of too big packets.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.29 |
cienaCesBenchmarkEntityStatsEntryPortRxUnderRunPktsUnderrun packet count for the benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.30 |
cienaCesBenchmarkEntityStatsEntryPortRxCrcErrorPktsNumber of packets received with CRC errors.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.31 |
cienaCesBenchmarkEntityStatsEntryPortRxLCheckErrorPktsNumber of packets with length check errors.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.32 |
cienaCesBenchmarkEntityStatsEntryPortRxLOutRangePktsThe number of frames received by the benchmark port
that exceeded the maximum permitted frame size.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.33 |
cienaCesBenchmarkEntityStatsEntryPortRxPausePktsThe total receive pause packets for the port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.34 |
cienaCesBenchmarkEntityStatsEntryPortRxUcastPktsThe total number of unicast packets received by benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.35 |
cienaCesBenchmarkEntityStatsEntryPortRxMcastPktsThe total number of multicast packets received by benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.36 |
cienaCesBenchmarkEntityStatsEntryPortRxBcastPktsThe total number of broadcast packets received by benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.37 |
cienaCesBenchmarkEntityStatsEntryPortRx64OctsPktsThe total number of 64-byte packets received by benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.38 |
cienaCesBenchmarkEntityStatsEntryPortRx65To127PktsThe total number of 65 to 127-byte packets received by
benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.39 |
cienaCesBenchmarkEntityStatsEntryPortRx128To255PktsThe total number of 128 to 255-byte packets received by
benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.40 |
cienaCesBenchmarkEntityStatsEntryPortRx256To511PktsThe total number of 256 to 511-byte packets received by
benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.41 |
cienaCesBenchmarkEntityStatsEntryPortRx512To1023PktsThe total number of 512 to 1023-byte packets received by
benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.42 |
cienaCesBenchmarkEntityStatsEntryPortRx1024To1518PktsThe total number of 1024 to 1518-byte packets received by
benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.43 |
cienaCesBenchmarkEntityStatsEntryPortRx1519To2047PktsThe total number of 1519 to 2047-byte packets received by
benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.44 |
cienaCesBenchmarkEntityStatsEntryPortRx2048To4095PktsThe total number of 2048 to 4095-byte packets received by
benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.45 |
cienaCesBenchmarkEntityStatsEntryPortRx4096To9216PktsThe total number of 4096 to 9216-byte packets received by
benchmark port.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.46 |
cienaCesBenchmarkEntityStatsEntryFpgaMissClassPktsTest packets received that didn't match any enabled
test session.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.47 |
cienaCesBenchmarkEntityStatsEntryFpgaCrcErrPktsTest packets received with CRC errorsro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.48 |
cienaCesBenchmarkEntityStatsEntryFpgaUdpChkSumErrPktsTest packets received with UDP checksum errorsro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.3.1.49 |
cienaCesBenchmarkEmixSequenceTableTable providing the list of configured EMIX sequences
on this node. SEQUENCE OF CienaCesBenchmarkEmixSequenceEntry .1.3.6.1.4.1.1271.2.1.39.1.1.4 |
cienaCesBenchmarkEmixSequenceEntryEMIX sequence entry. CienaCesBenchmarkEmixSequenceEntry .1.3.6.1.4.1.1271.2.1.39.1.1.4.1 |
cienaCesBenchmarkEmixSequenceIdUnique Id of the EMIX sequence entry Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.4.1.1 |
cienaCesBenchmarkEmixSequenceNameName of this EMIX sequencerw DisplayString .1.3.6.1.4.1.1271.2.1.39.1.1.4.1.2 |
cienaCesBenchmarkEmixSequenceEMIX sequence which is a sequence of up to
16 letters from the following set, that can
be repeated, where each letter is associated with
the frame size below it:
a b c d e f g h u v w x
64 128 256 512 1024 1280 1518 MTU custom 84 68 88
The u frame size is user configurable via the
cienaCesBenchmarkEmixSequenceUFrameSize attribute
while the h frame size is the maximum frame size
configured at the entity level. If the h frame size is
not configured at the entity level, h takes the value of
the maximum frame size of the port under test.
Letter v is the minimum frame size for IPv6 untagged or dot1q
test frames, w is the minimum for IPv4 qinq test frames, and
x is the minimum for IPv6 qinq test frames.
The EMIX character set is available via table
cienaCesBenchmarkEmixCharacterSetTable.rw DisplayString .1.3.6.1.4.1.1271.2.1.39.1.1.4.1.3 |
cienaCesBenchmarkEmixSequenceUFrameSizeThe frame size associated with the u letter
in the given sequence. The default value is
594.rw Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.4.1.4 |
cienaCesBenchmarkEmixSequenceNumOfRefNumber of generator test profiles currently
using this EMIX sequence for testing.
If this is the default EMIX sequence
set in the generator, that also count
as one reference.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.4.1.5 |
cienaCesBenchmarkEmixSequenceUserCreatedFlag indicating whether this sequence was
created by the user or by the system at
initialization. Only user created sequences
are editable.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.4.1.6 |
cienaCesBenchmarkEmixSequenceRowStatusUsed to manage the creation and deletion of the
conceptual rows in this table. To create a row in
this table, set this object to 'createAndGo'.
To delete a row in this table, set this object to
'destroy'. If the entry exists, it is displayed
as 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.4.1.7 |
cienaCesBenchmarkEmixFrameSizeTableTable providing the list of frame sizes associated
with the specified EMIX sequence Id. SEQUENCE OF CienaCesBenchmarkEmixFrameSizeEntry .1.3.6.1.4.1.1271.2.1.39.1.1.5 |
cienaCesBenchmarkEmixFrameSizeEntryFrame size associated with given EMIX
sequence ID and frame size index on a given Entity CienaCesBenchmarkEmixFrameSizeEntry .1.3.6.1.4.1.1271.2.1.39.1.1.5.1 |
cienaCesBenchmarkEmixFrameSizeIndexIndex of frame size in array of frame sizes
for the given EMIX sequence. Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.5.1.1 |
cienaCesBenchmarkEmixFrameSizeEntryFrameSizeFrame size associated with the letter at the
position given by cienaCesBenchmarkEmixFrameSizeIndex
in the EMIX sequence with Id
cienaCesBenchmarkEmixSequenceId.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.5.1.2 |
cienaCesBenchmarkEmixAvgFrameSizeTableTable providing the average frame size associated
with the specified EMIX sequence Id on a given Entity. SEQUENCE OF CienaCesBenchmarkEmixAvgFrameSizeEntry .1.3.6.1.4.1.1271.2.1.39.1.1.6 |
cienaCesBenchmarkEmixAvgFrameSizeEntryAverage frame size associated with given EMIX
sequence ID and Entity. Only valid for Generator
entities. CienaCesBenchmarkEmixAvgFrameSizeEntry .1.3.6.1.4.1.1271.2.1.39.1.1.6.1 |
cienaCesBenchmarkEmixAvgFrameSizeAverage frame size for the EMIX sequence with
Id cienaCesBenchmarkEmixSequenceId on the
generator entity with Id cienaCesBenchmarkEntityEntryId.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.6.1.1 |
cienaCesBenchmarkKpiProfileTableTable providing the list of configured Key Performance
Indicator profiles on this node. SEQUENCE OF CienaCesBenchmarkKpiProfileEntry .1.3.6.1.4.1.1271.2.1.39.1.1.7 |
cienaCesBenchmarkKpiProfileEntryHw session allocation entry. CienaCesBenchmarkKpiProfileEntry .1.3.6.1.4.1.1271.2.1.39.1.1.7.1 |
cienaCesBenchmarkKpiProfileIdUnique Id of the KPI profile entry Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.7.1.1 |
cienaCesBenchmarkKpiProfileNameName of a the KPI profilerw DisplayString .1.3.6.1.4.1.1271.2.1.39.1.1.7.1.2 |
cienaCesBenchmarkKpiProfileNumOfRefNumber of generator test profiles currently
using this KPI profile for results analysis.
If this is the default KPI profile set in
the generator, that also count as one reference.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.7.1.3 |
cienaCesBenchmarkKpiProfileRowStatusUsed to manage the creation and deletion of the
conceptual rows in this table. To create a row in
this table, set this object to 'createAndGo'.
To delete a row in this table, set this object to
'destroy'. If the entry exists, it is displayed
as 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.7.1.4 |
cienaCesBenchmarkKpiPcpColorTableTable providing the list of configured Key Performance
Indicator per KPI profile, per PCP and per Color. SEQUENCE OF CienaCesBenchmarkKpiPcpColorEntry .1.3.6.1.4.1.1271.2.1.39.1.1.8 |
cienaCesBenchmarkKpiPcpColorEntryEntry for the KPI values for the given KPI profile,
PCP and color. CienaCesBenchmarkKpiPcpColorEntry .1.3.6.1.4.1.1271.2.1.39.1.1.8.1 |
cienaCesBenchmarkKpiPcpIndexIndex for the PCP Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.8.1.1 |
cienaCesBenchmarkKpiColorIndexIndex for the PCP Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.8.1.2 |
cienaCesBenchmarkKpiPcpPCP value associated with this entryro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.8.1.3 |
cienaCesBenchmarkKpiColorTraffic color, green or yellow, associated with these
KPIs.ro CienaCesBenchmarkColorTest .1.3.6.1.4.1.1271.2.1.39.1.1.8.1.4 |
cienaCesBenchmarkKpiThroughputThroughput KPI for the given KPI profile, PCP and color
expressed in percent of bandwidth * 10000 to provide a 4
decimal point value.rw CienaCesBenchmarkThroughputKpiPercent .1.3.6.1.4.1.1271.2.1.39.1.1.8.1.5 |
cienaCesBenchmarkKpiFramelossFrameloss KPI for the given KPI profile, PCP and color
expressed in percent of bandwidth * 10000 to provide a 4
decimal point value.rw CienaCesBenchmarkFramelossKpiPercent .1.3.6.1.4.1.1271.2.1.39.1.1.8.1.6 |
cienaCesBenchmarkKpiLatencyMaximum latency in micro-seconds that the latency result
should not exceed in order for the test to be considered
a pass.rw Integer32 UNITS "microseconds" .1.3.6.1.4.1.1271.2.1.39.1.1.8.1.7 |
cienaCesBenchmarkKpiPdvMaximum PDV in micro-seconds that the PDV test result
should not exceed in order for the test to be
considered a pass.rw Integer32 UNITS "microseconds" .1.3.6.1.4.1.1271.2.1.39.1.1.8.1.8 |
cienaCesBenchmarkBwAllocProfileTableTable providing the list of configured bandwidth
allocation profiles on this node. SEQUENCE OF CienaCesBenchmarkBwAllocProfileEntry .1.3.6.1.4.1.1271.2.1.39.1.1.9 |
cienaCesBenchmarkBwAllocProfileEntryBW allocation profile entry CienaCesBenchmarkBwAllocProfileEntry .1.3.6.1.4.1.1271.2.1.39.1.1.9.1 |
cienaCesBenchmarkBwAllocProfileIdUnique Id of the bandwidth allocation
profile entry Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.9.1.1 |
cienaCesBenchmarkBwAllocProfileNameName of a the bandwidth allocation
profilerw DisplayString .1.3.6.1.4.1.1271.2.1.39.1.1.9.1.2 |
cienaCesBenchmarkBwAllocProfileNumOfRefNumber of generator test profiles currently
using this bandwidth allocation profile
for testing.
If this is the default BW allocation
profile set in the generator, that also count
as one reference.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.9.1.3 |
cienaCesBenchmarkBwAllocProfileRowStatusUsed to manage the creation and deletion of the
conceptual rows in this table. To create a row in
this table, set this object to 'createAndGo'.
To delete a row in this table, set this object to
'destroy'. If the entry exists, it is displayed
as 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.9.1.4 |
cienaCesBenchmarkBwRatioTableTable providing the list of configured bandwidth
ratio per profile, per PCP. SEQUENCE OF CienaCesBenchmarkBwRatioEntry .1.3.6.1.4.1.1271.2.1.39.1.1.10 |
cienaCesBenchmarkBwRatioEntryEntry for bandwidth percent per BW Allocation
profile and PCP CienaCesBenchmarkBwRatioEntry .1.3.6.1.4.1.1271.2.1.39.1.1.10.1 |
cienaCesBenchmarkBwRatioPcpIndexIndex for the PCP Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.10.1.1 |
cienaCesBenchmarkBwRatioPcpPCP value associated with this entry.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.10.1.2 |
cienaCesBenchmarkBwRatioRatio of test bandwidth to allocate to the
test session with this PCP value.rw Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.10.1.3 |
cienaCesBenchmarkProfileTableTable of profile entries. SEQUENCE OF CienaCesBenchmarkProfileEntry .1.3.6.1.4.1.1271.2.1.39.1.1.11 |
cienaCesBenchmarkProfileEntryBENCHMARK Profile characteristics. CienaCesBenchmarkProfileEntry .1.3.6.1.4.1.1271.2.1.39.1.1.11.1 |
cienaCesBenchmarkProfileEntryIdIndex for BENCHMARK profile records. Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.1 |
cienaCesBenchmarkProfileEntryNameName of the profile as entered when created.rw DisplayString .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.2 |
cienaCesBenchmarkProfileEntryBandwidthMaximum bandwidth to use when generating green test
traffic for the profile.rw Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.3 |
cienaCesBenchmarkProfileEntryExcessBandwidthMaximum bandwidth to use when generating yellow test
traffic for the profile. When testing for red color,
this bandwidth is multiplied by 1.25rw Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.4 |
cienaCesBenchmarkProfileEntryIntervalInterval between the start of one test group to the start
of the next test group.rw Enumeration .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.5 |
cienaCesBenchmarkProfileEntryDurationDuration of the testing. The test group is repeated until
the duration ends. When indefinite is set, test group is
run only once to completionrw Enumeration .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.6 |
cienaCesBenchmarkProfileEntrySetFrameSizeListUsed to replace the existing frame size table with the specified list.
More than one values can be listed and are separated by commas.rw DisplayString .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.7 |
cienaCesBenchmarkProfileEntryMaxSearchesFor the throughput test, this is the maximum number of
searches to find a transmit rate without drops for a
given frame size.rw Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.8 |
cienaCesBenchmarkProfileEntryMaxSamplesFor the latency and PDV tests, this is the number of
samples to take in order to determine the min, avg
and max latency and avg PDV.rw Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.9 |
cienaCesBenchmarkProfileEntrySamplingIntervalFor the latency and PDV tests, this is the interval,
in 100ms, to wait between samples.rw Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.10 |
cienaCesBenchmarkProfileEntryFrameLossStartBwFor the frame loss test, this indicates which bandwidth
value to use as the starting bandwidth; the maximum
bandwidth determined via the throughput test, the
bandwidth parameter configured in the profile, or
the maximum bandwidth of the link.
The value maximumLineRate(3) is not supported.rw Enumeration .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.11 |
cienaCesBenchmarkProfileEntryVidValidationIndicates whether VID validation is performed in
the classifier or not on the returning packet. If vid
validation is set to false, PCP and Color validation are
ignored and automatically become false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.12 |
cienaCesBenchmarkProfileEntryPcpValidationUsed to indicate whether the PCP value of the
test packet should be used to classifier the reflected
packets or not. When color remarking is used, this should
be set to false. Default is true.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.13 |
cienaCesBenchmarkProfileEntryColorValidationUsed to indicate whether the color bit of the
test packet should be used to classifier the reflected
packets or not. In color unaware testing, this should
be set to false. Default is true.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.14 |
cienaCesBenchmarkProfileEntryKpiProfileIdName of a valid KPI profile, from the
cienaCesBenchmarkKpiProfileTable, to use when
analysing the test results for this profile.rw Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.15 |
cienaCesBenchmarkProfileEntryBwAllocProfileIdId of a valid Bandwidth Allocation profile,
from the cienaCesBenchmarkBwAllocProfileTable,
used for distributing the profile bandwidth amongst
the configured PCP values for this profile when running
tests.rw Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.16 |
cienaCesBenchmarkProfileEntryEmixSequenceIdId of a valid EMIX sequence configured in the
cienaCesBenchmarkEmixSequenceTable, to use when y1564
is selected. The EMIX sequence is used instead of the
frame size list if and only if y1564 is selected.rw Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.17 |
cienaCesBenchmarkProfileEntryEncapTypeEncapsulation type to use for generated packets.rw Enumeration .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.18 |
cienaCesBenchmarkProfileEntryPduTypeVlan tag protocol identifier to use for the generated packets.rw Enumeration .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.19 |
cienaCesBenchmarkProfileEntryDstmacMAC address to use as the destination MAC address on
the generated packets.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.20 |
cienaCesBenchmarkProfileEntrySVidS-VLAN ID to used for generated packets when encapType is set to QinQrw Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.21 |
cienaCesBenchmarkProfileEntrySPcpBitmap of the S-VLAN PCP (Priority Code Point) value to
test with. When RFC2544 test is enabled, only one
PCP can be set in the mask. Otherwise, a test session
will be run for each PCP bit set. Used when the encapType
set to QinQrw CienaCesBenchmarkPcpBitmap .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.22 |
cienaCesBenchmarkProfileEntrySColorColor of the S-VLAN tag for the test traffic. This is
directly related to the value of the DEI bit
configured in the VLAN tag of the test traffic. Green
traffic will have its DEI bit set to 0 while Yellow
traffic will have its DEI bit set to 1.
Green test traffic is generated based on the bandwidth
configured in the test profile. Yellow traffic is
generated based on the excess-bandwidth parameter.
Finally, if the user selects green-yellow-red, the
yellow traffic is generated at 1.25 * excess-bandwidth.
This is used only when encapType is set to QinQrw CienaCesBenchmarkColorTest .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.23 |
cienaCesBenchmarkProfileEntryCVidC-VLAN ID to used for generated packets when encapType is set to
QinQ or dot1q.rw Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.24 |
cienaCesBenchmarkProfileEntryCPcpBitmap of the C-VLAN PCP (Priority Code Point) value to
test with. When RFC2544 test is enabled, only one
PCP can be set in the mask. Otherwise, a test session
will be run for each PCP bit set. Only used when the
encapType is set to dot1q. In the QinQ type, the c-pcp
of the test packet takes the same value as the s-pcp to
simplify software.rw CienaCesBenchmarkPcpBitmap .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.25 |
cienaCesBenchmarkProfileEntryCColorColor of the C-VLAN tag for the test traffic. This is
directly related to the value of the DEI bit
configured in the VLAN tag of the test traffic. Green
traffic will have its DEI bit set to 0 while Yellow
traffic will have its DEI bit set to 1.
Green test traffic is generated based on the bandwidth
configured in the test profile. Yellow traffic is
generated based on the excess-bandwidth parameter.
Finally, if the user selects green-yellow-red, the
yellow traffic is generated at 1.25 * excess-bandwidth.
This is used only when encapType is set to dot1q.
In a QinQ configuration, the c-dei bit is set to the
same value as the s-dei bit in order to simplify
software.rw CienaCesBenchmarkColorTest .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.26 |
cienaCesBenchmarkProfileEntryTpidVlan tag protocol identifier to use for the generated packets.
The following TPID values are supported by benchmark:
0x8100
0x9100
0x88A8rw Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.27 |
cienaCesBenchmarkProfileEntryDscpIP DSCP value to use for the generated packets.rw Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.28 |
cienaCesBenchmarkProfileEntrySrcInetAddrTypeSpecifies the type of address cienaCesBenchmarkProfileEntrySrcInetAddr belongs to.
When set to:
ipv4 : cienaCesBenchmarkProfileEntrySrcInetAddr should be compliant with
InetAddressIPv4 from RFC 4001
ipv6 : cienaCesBenchmarkProfileEntrySrcInetAddr should be compliant with
InetAddressIPv6 from RFC 4001.
The InetAddressType and the InetAddress must be set as part of the same SNMP
SET request.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.29 |
cienaCesBenchmarkProfileEntrySrcInetAddrSpecifies the unicast source IP address to use in IP test packet.
The InetAddress specified here is compliant with RFC 4001.
The InetAddressType and the InetAddress must be set as part of the same SNMP
SET request.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.30 |
cienaCesBenchmarkProfileEntryDstInetAddrTypeSpecifies the type of address cienaCesBenchmarkProfileEntryDstInetAddr belongs to.
When set to:
ipv4 : cienaCesBenchmarkProfileEntryDstInetAddr should be compliant with
InetAddressIPv4 from RFC 4001
ipv6 : cienaCesBenchmarkProfileEntryDstInetAddr should be compliant with
InetAddressIPv6 from RFC 4001.
The InetAddressType and the InetAddress must be set as part of the same SNMP
SET request.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.31 |
cienaCesBenchmarkProfileEntryDstInetAddrSpecifies the unicast destination IP address to use in IP test packet.
The InetAddress specified here is compliant with RFC 4001.
The InetAddressType and the InetAddress must be set as part of the same SNMP
SET request.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.32 |
cienaCesBenchmarkProfileEntryCustomPayloadCustom payload to be used on the generated packets.rw OCTET STRING .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.33 |
cienaCesBenchmarkProfileEntryThroughputTestRun throughput testrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.34 |
cienaCesBenchmarkProfileEntryFramelossTestRun frame loss testrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.35 |
cienaCesBenchmarkProfileEntryLatencyTestRun latency testrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.36 |
cienaCesBenchmarkProfileEntryPdvTestRun packet delay variation testrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.37 |
cienaCesBenchmarkProfileEntryBurstTestRun packet burst testrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.38 |
cienaCesBenchmarkProfileEntryRfc2544SuiteRun RFC2544 test suite which includes throughput, frame
loss and latency testsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.39 |
cienaCesBenchmarkProfileEntryY1564TestThe Y1564 test includes the throughput, frameloss,
latency and PDV tests are is run using the configured
EMIX sequence. If the profile's EMIX sequence is
not configured, the default generator EMIX sequence is
used. Y1564 and RFC2544 are mutually exclusive.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.40 |
cienaCesBenchmarkProfileEntryHwSessionsRequiredThis represents the number of hardware sessions
required to enable/run a test instance using
this profile according to the profile's current
configuration.
One hardware session is required for each outer tag
PCP and color configured.
Ex 1) Encap type set to dot1q, c-pcp is 0,3 and
c-color is set to green, 2 PCPs * 1 color =
2 hw sessions.
Ex 2) Encap type set to qinq, s-pcp is 0,4,5 and
s-color is set to green-yellow, then you
need 3 PCPs * 2 colors = 6 hw sessions.
Ex 3) Encap type set to untagged, only 1 hw session
is required.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.41 |
cienaCesBenchmarkProfileEntryNumOfRefNumber of generator test instances currently
using this test profile for testing.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.42 |
cienaCesBenchmarkProfileEntryRowStatusUsed to manage the creation and deletion of the
conceptual rows in this table. To create a row in
this table, set this object to 'createAndGo'.
To delete a row in this table, set this object to
'destroy'. If the entry exists, it is displayed
as 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.11.1.43 |
cienaCesBenchmarkTestInstanceTableTable of test instance entries. SEQUENCE OF CienaCesBenchmarkTestInstanceEntry .1.3.6.1.4.1.1271.2.1.39.1.1.12 |
cienaCesBenchmarkTestInstanceEntryBENCHMARK test instance characteristics. CienaCesBenchmarkTestInstanceEntry .1.3.6.1.4.1.1271.2.1.39.1.1.12.1 |
cienaCesBenchmarkTestInstanceEntryIdUnique identifier for the test instance. Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.1 |
cienaCesBenchmarkTestInstanceEntryNameUnique name given to the test instance at creation time.rw DisplayString .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.2 |
cienaCesBenchmarkTestInstanceEntrySubPortIdID of the sub-port to base this test instance on. The sub-port has
to be a child of the port under test associated with an existing
entity.rw Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.3 |
cienaCesBenchmarkTestInstanceEntryProfileIdId of an existing test profile to be used with the test instance as
the template for testing. A test profile ID has to be specified if
this test instance is associated with a generator entity. If it's a
reflector test instance, a profile ID CANNOT be specified, it has
to remain set 0.rw Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.4 |
cienaCesBenchmarkTestInstanceEntrySvidS VLAN ID to use for testing.
For generator test instances, this over-writes the value defined in
the referenced test profile if applicable (encap-type set to qinq).
For reflector test instances, this has to be set to a valid s-vid
accepted by the associated sub-port. A value of 0xFFFF indicates ANY s-vid.
A value of 0 indicates untagged or single-tagged traffic.rw Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.5 |
cienaCesBenchmarkTestInstanceEntryCvidC VLAN ID to use for testing.
For generator test instances, this over-writes the value defined in the
referenced test profile if applicable (encap-type set to dot1q or qinq).
For reflector test instances, this has to be set to a valid c-vid
accepted by the associated sub-port. A value of 0xFFFF indicates ANY
c-vid, while a value of 0 indicates untagged (s-vid also has to be set
to 0).rw Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.6 |
cienaCesBenchmarkTestInstanceEntryUntaggedWhen set to true, this indicates that the test instance
is to be associated with untagged data traffic. When this
is set, the cvid and svid parameters must be 0.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.7 |
cienaCesBenchmarkTestInstanceEntryDstMacDestination MAC address to use for generator test instances. When set,
this over writes the value specified in the referenced test profile.
This field is not applicable for reflector test instances.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.8 |
cienaCesBenchmarkTestInstanceEntryAdminStateIndicates the administrative state of the test instance. Upon enabling
a test instance, resources are allocated in hardware. For reflector test
instances, this triggers the start of reflection of any test traffic
received that matches the specified svid:cvid combination on the
specified sub-port.rw CienaCesBenchmarkAdminState .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.9 |
cienaCesBenchmarkTestInstanceEntryStartedApplicable to generator test instances, this indicates whether testing is
in progress or not. Setting this attribute to true will initiate
testing.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.10 |
cienaCesBenchmarkTestInstanceEntryCurrentIntervalApplicable to generator test instances, this indicates the
number of intervals of the selected tests have been run,
including the current one, in relation to the total number of
intervals to complete. This is based on the profile's
interval and duration configured.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.11 |
cienaCesBenchmarkTestInstanceEntryTotalIntervalsApplicable to generator test instances, this indicates the
total number of intervals of the selected tests to be run
by a single start command on the test instance. This is
based on the profile's interval and duration configured.
A value of 0 should be interpreted as unknown and -1 as
indefinite.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.12 |
cienaCesBenchmarkTestInstanceEntryLastIterStartDate and time of the last iteration that started since the
last time the system was rebooted or the statistics were
cleared on the test instance.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.13 |
cienaCesBenchmarkTestInstanceEntryClearStatsSet to true to clear the results and counters for the
test instance.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.14 |
cienaCesBenchmarkTestInstanceEntryRowStatusUsed to manage the creation and deletion of the conceptual rows in this table.
To create a row in this table, set this object to 'createAndGo'.
To delete a row in this table, set this object to 'destroy'.
If the entry exists, it is displayed as 'active'.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.15 |
cienaCesBenchmarkTestInstanceEntryAssocEntityIdID of the entity this test instance is associated with
(cienaCesBenchmarkEntityEntryId)ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.12.1.16 |
cienaCesBenchmarkGenTestSessionAllocationTableTable providing the allocation of hw test session per
generator test instance Id, PCP and color. SEQUENCE OF CienaCesBenchmarkGenTestSessionAllocationEntry .1.3.6.1.4.1.1271.2.1.39.1.1.13 |
cienaCesBenchmarkGenTestSessionAllocationEntryTest session (aka hardware session) allocation entry.
SPECIAL NOTE: It is important to know that when the associated
test profile's encapsulation type is set to untagged,
the last two elements of the index (PCP and color) are fixed
at 1.1. The management software needs to query using index
<entidyId>.<testInstandceId>.1.1 in this case, since
PCP and color are irrelevant in the untagged test traffic
scenario. CienaCesBenchmarkGenTestSessionAllocationEntry .1.3.6.1.4.1.1271.2.1.39.1.1.13.1 |
cienaCesBenchmarkGenTestSessionPcpIndexPCP Index. Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.1 |
cienaCesBenchmarkGenTestSessionColorIndexColor Index. Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.2 |
cienaCesBenchmarkGenTestSessionPcpPCP value associated with this hw sessionro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.3 |
cienaCesBenchmarkGenTestSessionColorColor of test traffic associated with this hardware
sessionro CienaCesBenchmarkColorTest .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.4 |
cienaCesBenchmarkGenTestSessionIdId of the hardware session allocated to the given
test instance id, pcp and colorro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.5 |
cienaCesBenchmarkGenTestSessionEmixSequenceIdEMIX sequence Id used with this session. If zero,
it indicates that the the frame size list is being used
for the test and cienaCesBenchmarkGenTestSessionCurrentPktSize
indicates which packet size is currently being tested.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.6 |
cienaCesBenchmarkGenTestSessionCurrentPktSizePacket size in bytes currently used by the running test.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.7 |
cienaCesBenchmarkGenTestSessionThroughputTestStateState of the throughput test for this hardware session
defined by the test instance id, pcp and colorro CienaCesBenchmarkThroughputTestState .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.8 |
cienaCesBenchmarkGenTestSessionFramelossTestStateState of the frameloss test for this hardware session
defined by the test instance id, pcp and colorro CienaCesBenchmarkFramelossTestState .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.9 |
cienaCesBenchmarkGenTestSessionLatencyTestStateState of the latency test for this hardware session
defined by the test instance id, pcp and colorro CienaCesBenchmarkLatencyPdvTestState .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.10 |
cienaCesBenchmarkGenTestSessionPdvTestStateState of the PDV test for this hardware session
defined by the test instance id, pcp and colorro CienaCesBenchmarkLatencyPdvTestState .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.11 |
cienaCesBenchmarkGenTestSessionRfc2544TestStateState of the RFC2544 test for this hardware session
defined by the test instance id, pcp and colorro CienaCesBenchmarkRfc2544TestState .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.12 |
cienaCesBenchmarkGenTestSessionY1564TestStateState of the Y1564 test for this hardware session
defined by the test instance id, pcp and colorro CienaCesBenchmarkY1564TestState .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.13 |
cienaCesBenchmarkGenTestSessionCurrentRateTraffic rate currently used to generate packets as percent
of the line ratero Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.14 |
cienaCesBenchmarkGenTestSessionSamplesCompletedWhen latency and/or pdv is running, this indicates how
many samples have been gathered so far.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.13.1.15 |
cienaCesBenchmarkTestInstanceStatsTableTable of test instance packet statistics entries. SEQUENCE OF CienaCesBenchmarkTestInstanceStatsEntry .1.3.6.1.4.1.1271.2.1.39.1.1.14 |
cienaCesBenchmarkTestInstanceStatsEntryBenchmark test instance packet statistics CienaCesBenchmarkTestInstanceStatsEntry .1.3.6.1.4.1.1271.2.1.39.1.1.14.1 |
cienaCesBenchmarkTestInstanceStatsRxPktsTotal number of received packets for
this test instance.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.1 |
cienaCesBenchmarkTestInstanceStatsRxIpv4PktsTotal number of IPv4 packets received for
this test instance.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.2 |
cienaCesBenchmarkTestInstanceStatsRxIpv4UdpPktsTotal number of IPv4 UDP packets received for
this test instance.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.3 |
cienaCesBenchmarkTestInstanceStatsRxIpv6PktsTotal number of IPv6 packets received for
this test instance.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.4 |
cienaCesBenchmarkTestInstanceStatsRxIpv6UdpPktsTotal number of IPv6 UDP packets received for
this test instance.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.5 |
cienaCesBenchmarkTestInstanceStatsRxNonIpPktsTotal number of non-IP packets received for
this test instance.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.6 |
cienaCesBenchmarkTestInstanceStatsRxUnrecognizedPktsTotal number of unrecognized packets received for
this test instance.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.7 |
cienaCesBenchmarkTestInstanceStatsRxDuplicatePktsTotal number of packets received with a duplicate
this test instance.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.8 |
cienaCesBenchmarkTestInstanceStatsRxDuplicatePktsOverflowWhen set to true, this indicates that the duplicate
pkt counter has rolled over in hardware and therefore,
cienaCesBenchmarkTestInstanceStatsRxDuplicatePkts might
not be accurate.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.9 |
cienaCesBenchmarkTestInstanceStatsRxOOOPktsTotal number of packets received with an out of
order sequence number. The sequence number was less
than the expected sequence number for this test instance.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.10 |
cienaCesBenchmarkTestInstanceStatsRxOOOPktsOverflowWhen set to true, this indicates that the out of order
pkt counter has rolled over in hardware and therefore,
cienaCesBenchmarkTestInstanceStatsRxOOOPkts might
not be accurate.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.11 |
cienaCesBenchmarkTestInstanceStatsRxDiscSeqNumPktsTotal number of packets received with a sequence number
greater then the expected sequence number for this test instance.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.12 |
cienaCesBenchmarkTestInstanceStatsRxDiscSeqNumPktsOverflowWhen set to true, this indicates that the discontinuity
in sequence number pkt counter has rolled over in hardware
and therefore, cienaCesBenchmarkTestInstanceStatsRxDiscSeqNumPkts
might not be accurate.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.13 |
cienaCesBenchmarkTestInstanceStatsRxUdpCheckSumPktsTotal number of UDP packets received with a UDP checksum
error.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.14 |
cienaCesBenchmarkTestInstanceStatsTxPktsTotal number of packets transmitted for this test instance.ro Counter64 .1.3.6.1.4.1.1271.2.1.39.1.1.14.1.15 |
cienaCesBenchmarkGenTestSessionThroughputResultsTableTable of BENCHMARK generator test session throughput results in Mbps. SEQUENCE OF CienaCesBenchmarkGenTestSessionThroughputResultsEntry .1.3.6.1.4.1.1271.2.1.39.1.1.15 |
cienaCesBenchmarkGenTestSessionThroughputResultsEntryBENCHMARK generator test session throughput results. CienaCesBenchmarkGenTestSessionThroughputResultsEntry .1.3.6.1.4.1.1271.2.1.39.1.1.15.1 |
cienaCesBenchmarkGenTestSessionThroughputResultsPcpIndexIndex of the PCP value Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.1 |
cienaCesBenchmarkGenTestSessionThroughputResultsColorIndexColor index. Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.2 |
cienaCesBenchmarkGenTestSessionThroughputResultsFrameSizeIndexFrame size index for which those throughput results are
for. When EMIX is used, in which case
cienaCesBenchmarkGenTestSessionThroughputResultsEmixSequenceId is
not NULL, there is only one frame size index for
the given test instance Id, pcp and color. In such a case, the
frame size index will be 0 and frame size will also be 0. Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.3 |
cienaCesBenchmarkGenTestSessionThroughputResultsPcpPCP value of the test packets associated with those
results.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.4 |
cienaCesBenchmarkGenTestSessionThroughputResultsColorColor of the test packets associated with those
results.ro CienaCesBenchmarkColorTest .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.5 |
cienaCesBenchmarkGenTestSessionThroughputResultsFrameSizePacket size in bytes. If 0, then the
cienaCesBenchmarkGenTestSessionThroughputResultsEmixSequenceId
indicates the ID of the EMIX sequence used for the testro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.6 |
cienaCesBenchmarkGenTestSessionThroughputResultsEmixSequenceIdID of the EMIX sequence that was used for running the
test which produced these results. When 0,
frame size indicates the size of the test frame
associated with these results.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.7 |
cienaCesBenchmarkGenTestSessionThroughputResultsMinMinimum throughput recorded for the given packet size
in Mbps * 100. The value is multiplied by 100 to be able
to send the results as an integer but should be divided
by 100 when displayed to provide a 2 decimal point accuracy.
A result of 123.45 is sent as 12345.ro CienaCesBenchmarkThroughputResult .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.8 |
cienaCesBenchmarkGenTestSessionThroughputResultsMaxMaximum throughput recorded for the given packet size
in Mbps * 100. The value is multiplied by 100 to be able
to send the results as an integer but should be divided
by 100 when displayed to provide a 2 decimal point accuracy.
A result of 123.45 is sent as 12345.ro CienaCesBenchmarkThroughputResult .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.9 |
cienaCesBenchmarkGenTestSessionThroughputResultsAvgAverage throughput recorded for the given packet size
in Mbps * 100. The value is multiplied by 100 to be able
to send the results as an integer but should be divided
by 100 when displayed to provide a 2 decimal point accuracy.
A result of 123.45 is sent as 12345.ro CienaCesBenchmarkThroughputResult .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.10 |
cienaCesBenchmarkGenTestSessionThroughputResultsIterationsNumber of times the test has been run for this packet size.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.11 |
cienaCesBenchmarkGenTestSessionThroughputResultsKpiResultPass or fail results for the test which is determined
by comparing the max throughput against the selected
KPI test instance's throughput pass criteria. If no KPI test instance
is selected for the given test instance Id, the result will
be 'notApplicable'.ro CienaCesBenchmarkKpiResult .1.3.6.1.4.1.1271.2.1.39.1.1.15.1.12 |
cienaCesBenchmarkGenTestSessionFramelossResultsTableTable of BENCHMARK generator test session frameloss results. SEQUENCE OF CienaCesBenchmarkGenTestSessionFramelossResultsEntry .1.3.6.1.4.1.1271.2.1.39.1.1.16 |
cienaCesBenchmarkGenTestSessionFramelossResultsEntryBENCHMARK generator test session frameloss results. CienaCesBenchmarkGenTestSessionFramelossResultsEntry .1.3.6.1.4.1.1271.2.1.39.1.1.16.1 |
cienaCesBenchmarkGenTestSessionFramelossResultsPcpIndexPCP index. Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.1 |
cienaCesBenchmarkGenTestSessionFramelossResultsColorIndexColor index. Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.2 |
cienaCesBenchmarkGenTestSessionFramelossResultsFrameSizeIndexFrame size index. Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.3 |
cienaCesBenchmarkGenTestSessionFramelossResultsRateIndexRate index. Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.4 |
cienaCesBenchmarkGenTestSessionFramelossResultsPcpPCP value of the test packets associated with those
results.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.5 |
cienaCesBenchmarkGenTestSessionFramelossResultsColorColor of the test packets associated with those
results.ro CienaCesBenchmarkColorTest .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.6 |
cienaCesBenchmarkGenTestSessionFramelossResultsFrameSizePacket size in bytes. If 0, then the
cienaCesBenchmarkGenTestSessionFramelossResultsEmixSequenceId
indicates the ID of the EMIX sequence used for the testro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.7 |
cienaCesBenchmarkGenTestSessionFramelossResultsEmixSequenceIdID of the EMIX sequence that was used for running the
test which produced these results. When 0,
frame size indicates the size of the test frame
associated with these results.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.8 |
cienaCesBenchmarkGenTestSessionFramelossResultsRateRate in percent of line rate.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.9 |
cienaCesBenchmarkGenTestSessionFramelossResultsFirstPercentage of frames lost on first test sequence.ro CienaCesBenchmarkFramelossResult .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.10 |
cienaCesBenchmarkGenTestSessionFramelossResultsSecondPercentage of frames lost on second test sequence.ro CienaCesBenchmarkFramelossResult .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.11 |
cienaCesBenchmarkGenTestSessionFramelossResultsKpiResultPass or fail results for the test which is determined
by comparing the frameloss result against the selected
KPI test instance's frameloss pass criteria. If no KPI test instance
is selected for the given test instance Id, the result will
be 'notApplicable'.ro CienaCesBenchmarkKpiResult .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.12 |
cienaCesBenchmarkGenTestSessionFramelossResultsResultPercentage of frames lost on the largest test sequence results.ro CienaCesBenchmarkFramelossResult .1.3.6.1.4.1.1271.2.1.39.1.1.16.1.13 |
cienaCesBenchmarkGenTestSessionLatencyResultsTableTable of BENCHMARK generator test session latency results in usec. SEQUENCE OF CienaCesBenchmarkGenTestSessionLatencyResultsEntry .1.3.6.1.4.1.1271.2.1.39.1.1.17 |
cienaCesBenchmarkGenTestSessionLatencyResultsEntryBENCHMARK generator test session latency results. CienaCesBenchmarkGenTestSessionLatencyResultsEntry .1.3.6.1.4.1.1271.2.1.39.1.1.17.1 |
cienaCesBenchmarkGenTestSessionLatencyResultsPcpIndexPCP index. Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.1 |
cienaCesBenchmarkGenTestSessionLatencyResultsColorIndexColor index. Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.2 |
cienaCesBenchmarkGenTestSessionLatencyResultsFrameSizeIndexFrame size index. Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.3 |
cienaCesBenchmarkGenTestSessionLatencyResultsPcpPCP value of the test packets associated with those
results.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.4 |
cienaCesBenchmarkGenTestSessionLatencyResultsColorColor of the test packets associated with those
results.ro CienaCesBenchmarkColorTest .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.5 |
cienaCesBenchmarkGenTestSessionLatencyResultsFrameSizePacket size in bytes.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.6 |
cienaCesBenchmarkGenTestSessionLatencyResultsEmixSequenceIdID of the EMIX sequence that was used for running the
test which produced these results. When 0,
frame size indicates the size of the test frame
associated with these results.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.7 |
cienaCesBenchmarkGenTestSessionLatencyResultsMinMinimum latency recorded for the given packet size.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.8 |
cienaCesBenchmarkGenTestSessionLatencyResultsMaxMaximum latency recorded for the given packet size.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.9 |
cienaCesBenchmarkGenTestSessionLatencyResultsAvgAverage latency recorded for the given packet size.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.10 |
cienaCesBenchmarkGenTestSessionLatencyResultsSamplesNumber of samples taken during the test.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.11 |
cienaCesBenchmarkGenTestSessionLatencyResultsKpiResultPass or fail results for the test which is determined
by comparing the frameloss result against the selected
KPI test instance's latency pass criteria. If no KPI test instance
is selected for the given test instance Id, the result will
be 'notApplicable'.ro CienaCesBenchmarkKpiResult .1.3.6.1.4.1.1271.2.1.39.1.1.17.1.12 |
cienaCesBenchmarkGenTestSessionPdvResultsTableTable of BENCHMARK generator test session packet delay
variation results in usec. SEQUENCE OF CienaCesBenchmarkGenTestSessionPdvResultsEntry .1.3.6.1.4.1.1271.2.1.39.1.1.18 |
cienaCesBenchmarkGenTestSessionPdvResultsEntryBENCHMARK generator test session packet delay variation results. CienaCesBenchmarkGenTestSessionPdvResultsEntry .1.3.6.1.4.1.1271.2.1.39.1.1.18.1 |
cienaCesBenchmarkGenTestSessionPdvResultsPcpIndexPCP index. Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.18.1.1 |
cienaCesBenchmarkGenTestSessionPdvResultsColorIndexColor index. Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.18.1.2 |
cienaCesBenchmarkGenTestSessionPdvResultsFrameSizeIndexFrame size index associated to those PDV stats. Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.18.1.3 |
cienaCesBenchmarkGenTestSessionPdvResultsPcpPCP value of the test packets associated with those
results.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.18.1.4 |
cienaCesBenchmarkGenTestSessionPdvResultsColorColor of the test packets associated with those
results.ro CienaCesBenchmarkColorTest .1.3.6.1.4.1.1271.2.1.39.1.1.18.1.5 |
cienaCesBenchmarkGenTestSessionPdvResultsFrameSizePacket size in bytes.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.18.1.6 |
cienaCesBenchmarkGenTestSessionPdvResultsEmixSequenceIdID of the EMIX sequence that was used for running the
test which produced these results. When 0,
frame size indicates the size of the test frame
associated with these results.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.18.1.7 |
cienaCesBenchmarkGenTestSessionPdvResultsAvgAverage PDV recorded for the given packet size.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.39.1.1.18.1.8 |
cienaCesBenchmarkGenTestSessionPdvResultsSamplesNumber of samples used for the test.ro Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.18.1.9 |
cienaCesBenchmarkGenTestSessionPdvResultsKpiResultPass or fail results for the test which is determined
by comparing the frameloss result against the selected
KPI test instance's throughput PDV criteria. If no KPI test instance
is selected for the given test instance Id, the result will
be 'notApplicable'.ro CienaCesBenchmarkKpiResult .1.3.6.1.4.1.1271.2.1.39.1.1.18.1.10 |
cienaCesBenchmarkEmixCharacterSetTableTable of BENCHMARK EMIX character set providing the
list of characters that can be used in an EMIX sequence
along with their corresponding frame size. SEQUENCE OF CienaCesBenchmarkEmixCharacterSetEntry .1.3.6.1.4.1.1271.2.1.39.1.1.19 |
cienaCesBenchmarkEmixCharacterSetEntryBENCHMARK EMIX character and its associated frame size. CienaCesBenchmarkEmixCharacterSetEntry .1.3.6.1.4.1.1271.2.1.39.1.1.19.1 |
cienaCesBenchmarkEmixCharacterSetEntryIndexCharacter index. Integer32 .1.3.6.1.4.1.1271.2.1.39.1.1.19.1.1 |
cienaCesBenchmarkEmixCharacterSetEntryCharacterEMIX character that can be used for creating an EMIX sequence.
The character set currently includes: a b c d e f g h u v w xro DisplayString .1.3.6.1.4.1.1271.2.1.39.1.1.19.1.2 |
cienaCesBenchmarkEmixCharacterSetEntryFrameSizeFrame size associated with the character. For h, the frame size
is the port under test's MTU and the u character is a custom
frame size configurable for each EMIX. The u frame size can take
a value of 64 to 10000 and defaults to 594. If u is bigger than
the MTU of the port under test, it will be reduced to the same
size as h.ro DisplayString .1.3.6.1.4.1.1271.2.1.39.1.1.19.1.3 |
cienaCesBenchmarkNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.2.39 |
cienaCesBenchmarkTestStartedThe start command has been issued for the given benchmark generator
test instance, either via CLI or SNMP. The cienaCesBenchmarkEntityEntryPortId
specifies the port under test when the test instance was started;
the s-vid, c-vid and destination mac address used to build the test
packet are also provided. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.39.1 |
cienaCesBenchmarkTestStoppedThe specified generator test instance has been manually stopped by
the user, either via CLI or SNMP, before the testing completed. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.39.2 |
cienaCesBenchmarkTestCompletedThe testing for the specified generator test instance has finished the
configured number of iterations as configured in the referenced
profile interval and duration. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.39.3 |
cienaCesBenchmarkTestFailedThroughputKpiThe throughput test result for the specified generator test
instance is below the specified throughput KPI value for
the given PCP and color traffic. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.39.4 |
cienaCesBenchmarkTestFailedFramelossKpiThe frameloss test result for the specified generator test
instance exceeds the specified throughput KPI value for
the given PCP and color traffic. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.39.5 |
cienaCesBenchmarkTestFailedLatencyKpiThe latency test result for the specified generator test
instance exceeds the specified throughput KPI value for
the given PCP and color traffic. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.39.6 |
cienaCesBenchmarkTestFailedPdvKpiThe throughput test result for the specified generator test
instance is below the specified throughput KPI value for
the given PCP and color traffic. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.39.7 |
cienaCesBenchmarkTestIterationCompletedAn iteration of tests for the given test instance has just completed. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.39.8 |