CIENA-CES-PORT-MIB
AI MIB Summary
The CIENA-CES-PORT-MIB enables the monitoring and configuration of Carrier Ethernet Service (CES) port parameters and the generation of port-specific event notifications on Ciena transport equipment. It provides granular visibility into CES interface states, traffic statistics, and alarm conditions to facilitate the management of circuit emulation services.
This module defines the port configuration objects and also the objects required for port related notifications.
Main OID:
cienaCesPortConfigMIB.1.3.6.1.4.1.1271.2.1.1
110
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
110 total| Object Name |
|---|
cienaCesPortConfigMIBThis module defines the port configuration objects and also the objects required for
port related notifications. MODULE-IDENTITY .1.3.6.1.4.1.1271.2.1.1 |
cienaCesPortConfigMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.1.1 |
cienaCesPortConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.1.1.1 |
cienaCesLogicalPortConfigTableTable of Ethernet ports. SEQUENCE OF CienaCesLogicalPortConfigEntry .1.3.6.1.4.1.1271.2.1.1.1.1.1 |
cienaCesLogicalPortConfigEntryPort entry in the Ethernet port table. CienaCesLogicalPortConfigEntry .1.3.6.1.4.1.1271.2.1.1.1.1.1.1 |
cienaCesLogicalPortConfigPgIdPort ID for the instance. Port IDs start at 1,
and may not be consecutive for each additional port.
This port ID should refer to the dot1dBasePort in the
dot1dBasePortEntry. Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.1 |
cienaCesLogicalPortConfigPortAdminStateThe administrative state of the port.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.2 |
cienaCesLogicalPortConfigPortOperStateThe current operational state of the port.ro Enumeration .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.3 |
cienaCesLogicalPortConfigPortLinkUpDownTrapStateThis object specifies the current value of the enterprise port traps state.rw CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.4 |
cienaCesLogicalPortConfigPortAllTrapStateThis object indicates whether the device generates traps for this port.rw CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.5 |
cienaCesLogicalPortConfigPortPortMacAddressThis object specifies the port MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.6 |
cienaCesLogicalPortConfigPortNameA textual string containing information about the
port. This string should indicate the physical
location of the port as well.ro DisplayString .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.7 |
cienaCesLogicalPortConfigPortDescThis object specifies the port description.ro DisplayString .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.8 |
cienaCesLogicalPortConfigPortTypeThe port type for the port.ro Enumeration .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.9 |
cienaCesLogicalPortConfigPortIfIndexThis object indicates the corresponding ifNumber for the PGID in the standard IF-MIB.ro Integer32 .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.10 |
cienaCesPortAdminSpeedThe desired speed of the port.ro Enumeration .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.11 |
cienaCesPortOperSpeedThe current operational speed of the port.ro Enumeration .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.12 |
cienaCesPortMaxFrameSizeThe maximum frame size allowed on this port including jumbo frame size.ro INTEGER .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.13 |
cienaCesLogicalPortConfigEttpAidThe TL1 AID of the ETTP object represented by this port.
This field is undefined if the logical port maps to a LAG.ro DisplayString .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.14 |
cienaCesLogicalPortLastDownReason1The most recent fault(s) that changed the port state to down.
This field is undefined if the logical port maps to a LAG.ro DisplayString .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.15 |
cienaCesLogicalPortLastDownReason2The most recent fault(s) that changed the port state to down.
This field is undefined if the logical port maps to a LAG.ro DisplayString .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.16 |
cienaCesLogicalPortLastDownReason3The most recent fault(s) that changed the port state to down.
This field is undefined if the logical port maps to a LAG.ro DisplayString .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.17 |
cienaCesLogicalPortMaskedDownReasonThe masked/debounced fault that explains why the port is down.
This field is undefined if the logical port maps to a LAG.ro DisplayString .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.18 |
cienaCesLogicalPortFacilityLoopbackThe facility loopback state of the port.
This field is undefined if the logical port maps to a LAG.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.19 |
cienaCesPortIngressRcosProfileIdThis object specifies the ID of the attached ingress resolved CoS profile.ro Integer32 .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.20 |
cienaCesPortIngressRcosProfileNameThis object specifies the name of the attached ingress resolved CoS profile.ro DisplayString .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.21 |
cienaCesPortIngressRcosPolicyThis object specifies the ingress resolved CoS policy.ro Enumeration .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.22 |
cienaCesLogicalPortConfigEttpIdETTP mapped to by PG-ID of the instance. ETTP IDs start at 1,
and may not be consecutive for each additional port.
An ETTP-ID of 0 denotes that the logical port is not mapped directly to an ETTP
e.g. Aggregate port or default physical port which has been port-aliased.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.23 |
cienaCesLogicalPortConfigEttpTypeThe port type for the associated ettp.ro Enumeration .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.24 |
cienaCesLogicalPortConfigIngMirrorPortThis object indicates whether ingress traffic is being
mirrored. If ingress traffic is being mirrored this object
specifies which port the traffic is being mirrored to.ro DisplayString .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.25 |
cienaCesLogicalPortConfigEgrMirrorPortThis object indicates whether egress traffic is being
mirrored. If egress traffic is being mirrored this object
specifies which port the traffic is being mirrored to.ro DisplayString .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.26 |
cienaCesLogicalPortConfigIngFloodContainerThis object indicates whether ingress flood traffic is
rate limited. If ingress flood traffic is rate limited
this object specifies the flood containment profile for
the port.ro DisplayString .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.27 |
cienaCesLogicalPortConfigPriorityTagModeThis object specifies whether the priority tag of a frame
is stripped (strip-tag) or left intact (leave-tag) upon
ingress and egress.ro PortPriorityTagPolicy .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.28 |
cienaCesLogicalPortConfigVidTpidCountThis object specifies the number of ingress TPID-pairs (inner + outer)
configured on the portro Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.29 |
cienaCesPortOperationalSpeedThis object specifies the port's current bandwidth in
kilobits per secondro Gauge32 UNITS "kbps" .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.30 |
cienaCesPortOuterTpidListThis object specifies the valid outer vlan tag list which can be used as egress vlan tag or outer vlan tag.ro DisplayString .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.31 |
cienaCesPortEgressOuterTpidThis object specifies the egress vlan tag.ro DisplayString .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.32 |
cienaCesPortOuterVtagTpidThis object specifies the outer vlan tag.ro DisplayString .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.33 |
cienaCesPortAdministrativeSpeedThis object specifies the port's administrative bandwidth in
kilobits per secondro Unsigned32 UNITS "kbps" .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.34 |
cienaCesPortTerminalLoopbackStateThe terminal loopback state of the port.
This field is undefined if the logical port maps to a LAG.ro CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.35 |
cienaCesPortLearnLimitThis object specifies learn limit count for portro INTEGER .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.36 |
cienaCesLogicalPortConfigSignalDegradeDetectionThis object specifies if signal degrade detection is enabled
or disabled on the port. And if enabled, this object specifies
the technology of which signal degrade detection uses.ro Enumeration .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.37 |
cienaCesLogicalPortConfigSignalDegradeStateThe signal degrade state of the port.ro Enumeration .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.38 |
cienaCesPortL2CftStatusAdmin Status of L2CFT profile attached to the port.ro Enumeration .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.39 |
cienaCesPortL2CftProfileIdThe ID of the custom L2CFT profile attached to the given port.
A non-zero value refers to the L2CFT profile as indexed by the cienaCesDpL2CftProfileIndex object
in the cienaCesDataplaneMIB module.
A value of 0 means no L2CFT profile is attached to this port.
Setting a non-zero value will attach the corresponding L2CFT profile to the given port.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.40 |
cienaCesPortConfigHoldOffStateThe object specifies the hold-off state of the port.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.41 |
cienaCesPortConfigHoldOffTimeThis object specifies the time (in deciseconds, 1ds=100ms) for which port
remains in hold-off state. During the hold-off time, all physical link
transitions are ignored.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.42 |
cienaCesPortOperFecStateThe current operational Forward Error Correction (FEC) state of the port.ro Enumeration .1.3.6.1.4.1.1271.2.1.1.1.1.1.1.43 |
cienaCesPortPgIdMapping OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.1.1.2 |
cienaCesPortPgIdMappingTableTable to map the hierarchical (dotted) port index to PGID value. SEQUENCE OF CienaCesPortPgIdMappingEntry .1.3.6.1.4.1.1271.2.1.1.1.2.1 |
cienaCesPortPgIdMappingEntryEntry in the PGID mapping table. CienaCesPortPgIdMappingEntry .1.3.6.1.4.1.1271.2.1.1.1.2.1.1 |
cienaCesPortPgIdMappingChassisIndexThe object indicates the chassis index for the port. Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.2.1.1.1 |
cienaCesPortPgIdMappingShelfIndexThe object indicates the shelf index for the port. Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.2.1.1.2 |
cienaCesPortPgIdMappingSlotIndexThe object indicates the slot index for the port. Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.2.1.1.3 |
cienaCesPortPgidMappingPortNumberThe object indicates the port number for the corresponding PGID.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.2.1.1.4 |
cienaCesPortPgIdMappingPgIdThis object indicates the PGID value for the corresponding dotted index value.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.2.1.1.5 |
cienaCesPortPgIdMappingNotifChassisIndexThe object indicates the chassis index for the port used for trap definition.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.2.1.1.6 |
cienaCesPortPgIdMappingNotifShelfIndexThe object indicates the shelf index for the port used for trap definition.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.2.1.1.7 |
cienaCesPortPgIdMappingNotifSlotIndexThe object indicates the slot index for the port used for trap definition.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.2.1.1.8 |
cienaCesPortPgIdMappingNotifPortNumberThe object indicates the port number for the corresponding PGID
used for trap definition.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.2.1.1.9 |
cienaCesEttpConfig OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.1.1.3 |
cienaCesEttpConfigTableTable of Ethernet (default) physical ports. (ETTPs). SEQUENCE OF CienaCesEttpConfigEntry .1.3.6.1.4.1.1271.2.1.1.1.3.1 |
cienaCesEttpConfigEntryETTP entry in the Ethernet default physical port table. CienaCesEttpConfigEntry .1.3.6.1.4.1.1271.2.1.1.1.3.1.1 |
cienaCesEttpConfigEttpIdETTP ID for the instance. ETTP IDs start at 1,
and may not be consecutive for each additional ettp.
Note that ETTP-IDs map directly 1:1 to default physical port PGIDs Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.3.1.1.1 |
cienaCesEttpConfigOperStateThe current operational state of the ettp.ro Enumeration .1.3.6.1.4.1.1271.2.1.1.1.3.1.1.2 |
cienaCesEttpConfigLinkUpDownTrapStateThis object specifies the current value of the enterprise ettp traps state.rw CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.1.1.3.1.1.3 |
cienaCesEttpConfigAllTrapStateThis object indicates whether the device generates traps for this ettp.rw CienaGlobalState (CIENA-TC) .1.3.6.1.4.1.1271.2.1.1.1.3.1.1.4 |
cienaCesEttpConfigMacAddressThis object specifies the ettp MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.1271.2.1.1.1.3.1.1.5 |
cienaCesEttpConfigNameA textual string containing information about the
ettp. This string should indicate the physical
location of the ettp as well.ro DisplayString .1.3.6.1.4.1.1271.2.1.1.1.3.1.1.6 |
cienaCesEttpConfigEttpTypeThe port type for the ettp.ro Enumeration .1.3.6.1.4.1.1271.2.1.1.1.3.1.1.7 |
cienaCesEttpConfigAdminSpeedThe desired speed of the ettp.ro Enumeration .1.3.6.1.4.1.1271.2.1.1.1.3.1.1.8 |
cienaCesEttpConfigOperSpeedThe current operational speed of the ettp.ro Enumeration .1.3.6.1.4.1.1271.2.1.1.1.3.1.1.9 |
cienaCesEttpConfigEthLpPgidPG ID-mapped to the instance.
ETTPs will map to a logical port which can be one of default-physical-port, aggregate-port, port-alias-portro Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.3.1.1.10 |
cienaCesEttpConfigDuplexThis object indicates whether the port can transmit and receive data simultaneously.ro EttpDuplexPolicy .1.3.6.1.4.1.1271.2.1.1.1.3.1.1.11 |
cienaCesEttpConfigFlowCntlThis object indicates the port action when frames are received faster than the port can process them.ro EttpFlowControlPolicy .1.3.6.1.4.1.1271.2.1.1.1.3.1.1.12 |
cienaCesEttpConfigAutoNegThis object indicates whether the port should negotiate with its link partner to determine common operating parameters.ro EttpAutoNegPolicy .1.3.6.1.4.1.1271.2.1.1.1.3.1.1.13 |
cienaCesEttpConfigAdvertisedFlowCntlThis object indicates whether flow control settings are advertised.ro EttpAdvertisedFlowControlPolicy .1.3.6.1.4.1.1271.2.1.1.1.3.1.1.14 |
cienaCesEttpConfigIfgDecrThis object specifies the number of bytes by which to decrease the Inter-frame Gap (IFG) for frames being received on the port.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.3.1.1.15 |
cienaCesEttpConfigXcvrFreqThis object specifies the desired frequency of the transceiver in GHz.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.3.1.1.16 |
cienaCesLogicalPortTpid OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.1.1.4 |
cienaCesLogicalPortTpidTableTable of ingress TPIDs for every port SEQUENCE OF CienaCesLogicalPortTpidEntry .1.3.6.1.4.1.1271.2.1.1.1.4.1 |
cienaCesLogicalPortTpidEntryEach entry represents an individual ingress TPID pairs belonging to a port.
The number of ingress TPID entries per port is decided by the
cienaCesLogicalPortConfigVidTpidCount object. E.g. 8100 and 88A8 CienaCesLogicalPortTpidEntry .1.3.6.1.4.1.1271.2.1.1.1.4.1.1 |
cienaCesLogicalPortTpidIndexThe object indicates the ingress tpid pair index for the port. size => CS_MAX_L2_ETYPES Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.4.1.1.1 |
cienaCesLogicalPortInnerVidTpidThe object indicates the inner vlan tag TPID for the ingress tpid pair index of the port.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.4.1.1.2 |
cienaCesLogicalPortOuterVidTpidThe object indicates the outer vlan tag TPID for the ingress tpid pair index of the port.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.4.1.1.3 |
cienaCesChPortPgIdMapping OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.1.1.5 |
cienaCesChPortPgIdMappingTableTable to map the hierarchical (dotted) port index to PgId value.
This table supports channelized interfaces. SEQUENCE OF CienaCesChPortPgIdMappingEntry .1.3.6.1.4.1.1271.2.1.1.1.5.1 |
cienaCesChPortPgIdMappingEntryEntry in the PgId mapping table. CienaCesChPortPgIdMappingEntry .1.3.6.1.4.1.1271.2.1.1.1.5.1.1 |
cienaCesChPortPgIdMappingChassisIndexThe object indicates the chassis index for the port. Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.5.1.1.1 |
cienaCesChPortPgIdMappingShelfIndexThe object indicates the shelf index for the port. Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.5.1.1.2 |
cienaCesChPortPgIdMappingSlotIndexThe object indicates the slot index for the port. Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.5.1.1.3 |
cienaCesChPortPgIdMappingPortNumberThe object indicates the port number for the corresponding PgId. Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.5.1.1.4 |
cienaCesChPortPgIdMappingChannelNumberThe object indicates the channel number for the corresponding PgId.
The value 0 is used if the port is not channelized. Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.5.1.1.5 |
cienaCesChPortPgIdMappingPgIdThis object indicates the PgId value for the port as specified by this object's index.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.5.1.1.6 |
cienaCesChPortPgIdMappingNotifChassisIndexThe object indicates the chassis index for the port used for trap definition.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.5.1.1.7 |
cienaCesChPortPgIdMappingNotifShelfIndexThe object indicates the shelf index for the port used for trap definition.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.5.1.1.8 |
cienaCesChPortPgIdMappingNotifSlotIndexThe object indicates the slot index for the port used for trap definition.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.5.1.1.9 |
cienaCesChPortPgIdMappingNotifPortNumberThe object indicates the port number for the corresponding PgId
used for trap definition.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.5.1.1.10 |
cienaCesChPortPgIdMappingNotifChannelNumberThe object indicates the channel number for the corresponding PgId
used for trap definition. The value 0 is used if the port is
not channelized.ro Unsigned32 .1.3.6.1.4.1.1271.2.1.1.1.5.1.1.11 |
cienaCesPortMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.1.2 |
cienaCesPortMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.1.2.1 |
cienaCesPortMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.1.1.2.2 |
cienaCesPortNotificationMIBNotificationPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.2.2 |
cienaCesPortNotificationMIBNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.1271.2.2.2.0 |
cienaCesPortNotificationPortDownA cienaCesLogicalPortNotificationPortDown trap signifies that the SNMP entity, acting in
an agent role, has detected that the link status has become operationally down
for one of its communication links.
To enable the device to send this notification:
- cienaCesPortEnhancedLinkTrapState needs to be set to enabled
- cienaCesPortAllTrapState needs to be set to enabled
- cienaCesLogicalPortConfigPortAllTrapState for the port needs to be set to enabled
- cienaCesLogicalPortConfigPortLinkUpDownTrapState for the port needs to be set to enabled
These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesPortPgIdMappingNotifChassisIndex, cienaCesPortPgIdMappingNotifShelfIndex,
cienaCesPortPgIdMappingNotifSlotIndex, cienaCesPortPgIdMappingNotifPortNumber,
cienaCesLogicalPortConfigPortAdminState, cienaCesLogicalPortConfigPortOperState,
cienaCesLogicalPortConfigPortName, cienaCesLogicalPortConfigPortType, cienaCesLogicalPortConfigPortDesc,
sysName, and sysLocation. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.2.0.1 |
cienaCesPortNotificationPortUpA cienaCesLogicalPortNotificationPortUp trap signifies that the SNMP entity, acting in
an agent role, has detected the link status has become operationally up for
one of its communication links.
To enable the device to send this notification:
- cienaCesPortEnhancedLinkTrapState needs to be set to enabled
- cienaCesPortAllTrapState needs to be set to enabled
- cienaCesLogicalPortConfigPortAllTrapState for the port needs to be set to enabled
- cienaCesLogicalPortConfigPortLinkUpDownTrapState for the port needs to be set to enabled
These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesPortPgIdMappingNotifChassisIndex,
cienaCesPortPgIdMappingNotifShelfIndex, cienaCesPortPgIdMappingNotifSlotIndex,
cienaCesPortPgIdMappingNotifPortNumber, cienaCesLogicalPortConfigPortAdminState,
cienaCesLogicalPortConfigPortOperState, cienaCesLogicalPortConfigPortName,
cienaCesLogicalPortConfigPortType, cienaCesLogicalPortConfigPortDesc, sysName,
sysLocation, cienaCesChassisSystemId and cienaCesLogicalPortConfigEttpAid. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.2.0.2 |
cienaCesChPortNotificationPortUpA cienaCesChPortNotificationPortUp trap signifies that the SNMP entity, acting in
an agent role, has detected the link status has become operationally up for
one of its communication links.
To enable the device to send this notification:
- cienaCesPortEnhancedLinkTrapState needs to be set to enabled
- cienaCesPortAllTrapState needs to be set to enabled
- cienaCesLogicalPortConfigPortAllTrapState for the port needs to be set to enabled
- cienaCesLogicalPortConfigPortLinkUpDownTrapState for the port needs to be set to enabled
These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesChPortPgIdMappingNotifChassisIndex,
cienaCesChPortPgIdMappingNotifShelfIndex, cienaCesChPortPgIdMappingNotifSlotIndex,
cienaCesChPortPgIdMappingNotifPortNumber, cienaCesChPortPgIdMappingNotifChannelNumber,
cienaCesLogicalPortConfigPortAdminState,
cienaCesLogicalPortConfigPortOperState, cienaCesLogicalPortConfigPortName,
cienaCesLogicalPortConfigPortType, cienaCesLogicalPortConfigPortDesc, sysName,
sysLocation, cienaCesChassisSystemId and cienaCesLogicalPortConfigEttpAid. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.2.0.3 |
cienaCesChPortNotificationPortDownA cienaCesChPortNotificationPortDown trap signifies that the SNMP entity, acting in
an agent role, has detected that the link status has become operationally down
for one of its communication links.
To enable the device to send this notification:
- cienaCesPortEnhancedLinkTrapState needs to be set to enabled
- cienaCesPortAllTrapState needs to be set to enabled
- cienaCesLogicalPortConfigPortAllTrapState for the port needs to be set to enabled
- cienaCesLogicalPortConfigPortLinkUpDownTrapState for the port needs to be set to enabled
These objects are set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesChPortPgIdMappingNotifChassisIndex, cienaCesChPortPgIdMappingNotifShelfIndex,
cienaCesChPortPgIdMappingNotifSlotIndex, cienaCesChPortPgIdMappingNotifPortNumber,
cienaCesChPortPgIdMappingNotifChannelNumber,
cienaCesLogicalPortConfigPortAdminState, cienaCesLogicalPortConfigPortOperState,
cienaCesLogicalPortConfigPortName, cienaCesLogicalPortConfigPortType, cienaCesLogicalPortConfigPortDesc,
sysName, and sysLocation. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.2.0.4 |
cienaCesPortNotificationPortSignalDegradeSetA cienaCesPortNotificationPortSignalDegradeSet trap is raised when a
signal degrade condition is detected against the specified port.
This trap is enabled by default. Variable bindings include:
cienaGlobalSeverity,
cienaGlobalMacAddress,
cienaCesPortPgIdMappingNotifChassisIndex,
cienaCesPortPgIdMappingNotifShelfIndex,
cienaCesPortPgIdMappingNotifSlotIndex,
cienaCesPortPgIdMappingNotifPortNumber,
cienaCesLogicalPortConfigPortAdminState,
cienaCesLogicalPortConfigPortOperState,
cienaCesLogicalPortConfigPortName,
cienaCesLogicalPortConfigPortType,
cienaCesLogicalPortConfigPortDesc,
sysName,
sysLocation,
cienaCesChassisSystemId,
cienaCesLogicalPortConfigEttpAid,
cienaCesLogicalPortConfigSignalDegradeDetection NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.2.0.5 |
cienaCesPortNotificationPortSignalDegradeClearA cienaCesPortNotificationPortSignalDegradeClear trap is raised when
the signal degrade condition is cleared against the specified port.
This trap is enabled by default. Variable bindings include:
cienaGlobalSeverity,
cienaGlobalMacAddress,
cienaCesPortPgIdMappingNotifChassisIndex,
cienaCesPortPgIdMappingNotifShelfIndex,
cienaCesPortPgIdMappingNotifSlotIndex,
cienaCesPortPgIdMappingNotifPortNumber,
cienaCesLogicalPortConfigPortAdminState,
cienaCesLogicalPortConfigPortOperState,
cienaCesLogicalPortConfigPortName,
cienaCesLogicalPortConfigPortType,
cienaCesLogicalPortConfigPortDesc,
sysName,
sysLocation,
cienaCesChassisSystemId
cienaCesLogicalPortConfigEttpAid. NOTIFICATION-TYPE .1.3.6.1.4.1.1271.2.2.2.0.6 |