CIE1000-VLAN-MIB
AI MIB Summary
The CIE1000-VLAN-MIB module enables monitoring and management of VLAN configuration parameters, port assignments, and traffic statistics on CIE1000 series networking hardware via the SNMP protocol. It provides access to specific VLAN identifiers, bridge table entries, and interface state counters required for maintaining Layer 2 network segmentation integrity.
Private MIB for VLAN.
Main OID:
cie1000VlanMib.1.3.6.1.4.1.9.9.832.1.13
74
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
74 total| Object Name |
|---|
cie1000VlanMibPrivate MIB for VLAN. MODULE-IDENTITY .1.3.6.1.4.1.9.9.832.1.13 |
SNMPv2-CONFPrivate MIB for VLAN. NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.832.1.13 |
cie1000VlanMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.13.1 |
cie1000VlanCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.13.1.1 |
cie1000VlanCapabilitiesVlanIdMinThe minimum VLAN ID that can be configured on the device.ro CIE1000Vlan (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.1.1 |
cie1000VlanCapabilitiesVlanIdMaxThe maximum VLAN ID that can be configured on the device.ro CIE1000Vlan (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.1.2 |
cie1000VlanCapabilitiesFidCntThe number of Shared VLAN Learning (SVL) Filter IDs (FIDs) supported by
this device. 0 if SVL is not supported.ro CIE1000Unsigned16 (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.1.3 |
cie1000VlanConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.13.1.2 |
cie1000VlanConfigGlobals OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.13.1.2.1 |
cie1000VlanConfigGlobalsMain OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.13.1.2.1.1 |
cie1000VlanConfigGlobalsMainCustomSPortEtherTypeTPID (EtherType) for ports marked as Custom-S tag aware.rw CIE1000EtherType .1.3.6.1.4.1.9.9.832.1.13.1.2.1.1.1 |
cie1000VlanConfigGlobalsMainAccessVlans0To1KFirst quarter of bit-array indicating the enabled access VLANs.rw CIE1000VlanListQuarter (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.1.1.2 |
cie1000VlanConfigGlobalsMainAccessVlans1KTo2KSecond quarter of bit-array indicating the enabled access VLANs.rw CIE1000VlanListQuarter (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.1.1.3 |
cie1000VlanConfigGlobalsMainAccessVlans2KTo3KThird quarter of bit-array indicating the enabled access VLANs.rw CIE1000VlanListQuarter (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.1.1.4 |
cie1000VlanConfigGlobalsMainAccessVlans3KTo4KLast quarter of bit-array indicating the enabled access VLANs.rw CIE1000VlanListQuarter (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.1.1.5 |
cie1000VlanConfigGlobalsNameTableTable of VLAN names. SEQUENCE OF CIE1000VlanConfigGlobalsNameEntry .1.3.6.1.4.1.9.9.832.1.13.1.2.1.2 |
cie1000VlanConfigGlobalsNameEntryEach row contains the name of a given VLAN. CIE1000VlanConfigGlobalsNameEntry .1.3.6.1.4.1.9.9.832.1.13.1.2.1.2.1 |
cie1000VlanConfigGlobalsNameVlanIdVLAN ID. Valid range is 1 - 4095.ro CIE1000Vlan (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.1.2.1.1 |
cie1000VlanConfigGlobalsNameNameVLAN Name. Default for VLAN 1 is 'default'. Default for any other VLAN
is 'VLANxxxx', where 'xxxx' is a decimal representation of the VLAN ID
with leading zeroes.rw CIE1000DisplayString .1.3.6.1.4.1.9.9.832.1.13.1.2.1.2.1.2 |
cie1000VlanConfigInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.13.1.2.2 |
cie1000VlanConfigInterfacesTableTable of per-port configuration. SEQUENCE OF CIE1000VlanConfigInterfacesEntry .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1 |
cie1000VlanConfigInterfacesEntryEach row contains the VLAN configuration for a port interface. CIE1000VlanConfigInterfacesEntry .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1 |
cie1000VlanConfigInterfacesIfIndexLogical interface index.ro CIE1000InterfaceIndex (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.1 |
cie1000VlanConfigInterfacesModeVLAN mode of the port.rw CIE1000VlanPortMode .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.2 |
cie1000VlanConfigInterfacesAccessVlanThe port VLAN ID the port will be assigned when Mode is Access.rw CIE1000Vlan (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.3 |
cie1000VlanConfigInterfacesTrunkNativeVlanThe port VLAN ID the port will be assigned when Mode is trunk.rw CIE1000Vlan (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.4 |
cie1000VlanConfigInterfacesTrunkTagNativeVlanControls whether frames classified to TrunkNativeVlan get tagged on
egress. Used when Mode is trunk.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.5 |
cie1000VlanConfigInterfacesTrunkVlans0KTo1KFirst quarter of bit-array indicating whether the port is member of a
VLAN ('1') or not ('0'). Used when Mode is trunk.rw CIE1000VlanListQuarter (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.6 |
cie1000VlanConfigInterfacesTrunkVlans1KTo2KSecond quarter of bit-array indicating whether the port is member of a
VLAN ('1') or not ('0'). Used when Mode is trunk.rw CIE1000VlanListQuarter (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.7 |
cie1000VlanConfigInterfacesTrunkVlans2KTo3KThird quarter of bit-array indicating whether the port is member of a
VLAN ('1') or not ('0'). Used when Mode is trunk.rw CIE1000VlanListQuarter (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.8 |
cie1000VlanConfigInterfacesTrunkVlans3KTo4KLast quarter of bit-array indicating whether the port is member of a
VLAN ('1') or not ('0'). Used when Mode is trunk.rw CIE1000VlanListQuarter (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.9 |
cie1000VlanConfigInterfacesHybridNativeVlanThe port VLAN ID the port will be assigned when Mode is hybrid.rw CIE1000Vlan (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.10 |
cie1000VlanConfigInterfacesHybridPortTypeControls awareness and whether it reacts to C-tags, S-tags,
Custom-S-tags. Used when Mode is hybrid.rw CIE1000VlanPortType .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.11 |
cie1000VlanConfigInterfacesHybridIngressFilteringControls whether frames classified to a certain VLAN ID get discarded
(true) or not (false) if the port is not member of the VLAN ID. Used
when Mode is hybrid.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.12 |
cie1000VlanConfigInterfacesHybridIngressAcceptanceControls whether frames are accepted on ingress depending on VLAN tag
in frame. Used when Mode is hybrid.rw CIE1000VlanIngressAcceptance .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.13 |
cie1000VlanConfigInterfacesHybridEgressTaggingControls tagging of frames on egress. tagThis(1) is not allowed. Used
when Mode is hybrid.rw CIE1000VlanEgressTagging .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.14 |
cie1000VlanConfigInterfacesHybridVlans0KTo1KFirst quarter of bit-array indicating whether the port is member of a
VLAN ('1') or not ('0'). Used when Mode is hybrid.rw CIE1000VlanListQuarter (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.15 |
cie1000VlanConfigInterfacesHybridVlans1KTo2KSecond quarter of bit-array indicating whether the port is member of a
VLAN ('1') or not ('0'). Used when Mode is hybrid.rw CIE1000VlanListQuarter (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.16 |
cie1000VlanConfigInterfacesHybridVlans2KTo3KThird quarter of bit-array indicating whether the port is member of a
VLAN ('1') or not ('0'). Used when Mode is hybrid.rw CIE1000VlanListQuarter (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.17 |
cie1000VlanConfigInterfacesHybridVlans3KTo4KLast quarter of bit-array indicating whether the port is member of a
VLAN ('1') or not ('0'). Used when Mode is hybrid.rw CIE1000VlanListQuarter (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.18 |
cie1000VlanConfigInterfacesForbiddenVlans0KTo1KFirst quarter of bit-array indicating whether the port can ever become
a member of a VLAN ('0') or not ('1'). Used in all modes.rw CIE1000VlanListQuarter (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.19 |
cie1000VlanConfigInterfacesForbiddenVlans1KTo2KSecond quarter of bit-array indicating whether the port can ever become
a member of a VLAN ('0') or not ('1'). Used in all modes.rw CIE1000VlanListQuarter (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.20 |
cie1000VlanConfigInterfacesForbiddenVlans2KTo3KThird quarter of bit-array indicating whether the port can ever become
a member of a VLAN ('0') or not ('1'). Used in all modes.rw CIE1000VlanListQuarter (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.21 |
cie1000VlanConfigInterfacesForbiddenVlans3KTo4KLast quarter of bit-array indicating whether the port can ever become a
member of a VLAN ('0') or not ('1'). Used in all modes.rw CIE1000VlanListQuarter (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.1.1.22 |
cie1000VlanConfigInterfacesSvlTableShared VLAN Learning (SVL) allows for having one or more VLAN IDs map
to the same Filter ID (FID). For a given set of VLANs, if an individual
MAC address is learned in one VLAN, that learned information is used in
forwarding decisions taken for that address relative to all other VLANs
in the given set.
fidCnt, which can be found in the capabilities section, indicates the
number of FIDs available on this platform. The feature is not available
if this number is 0. SEQUENCE OF CIE1000VlanConfigInterfacesSvlEntry .1.3.6.1.4.1.9.9.832.1.13.1.2.2.2 |
cie1000VlanConfigInterfacesSvlEntryThe table is indexed by VLAN ID CIE1000VlanConfigInterfacesSvlEntry .1.3.6.1.4.1.9.9.832.1.13.1.2.2.2.1 |
cie1000VlanConfigInterfacesSvlVlanIdVLAN ID. Valid range is 1 - 4095.ro CIE1000Vlan (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.2.1.1 |
cie1000VlanConfigInterfacesSvlFilterIdFilter ID (FID) used in Shared VLAN Learning. Zero or more VLANs may
map into the same FID.rw CIE1000Unsigned16 (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.2.1.2 |
cie1000VlanConfigInterfacesSvlActionActionrw CIE1000RowEditorState (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.2.1.100 |
cie1000VlanConfigInterfacesSvlTableRowEditor OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.13.1.2.2.3 |
cie1000VlanConfigInterfacesSvlTableRowEditorVlanIdVLAN ID. Valid range is 1 - 4095.rw CIE1000Vlan (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.3.1 |
cie1000VlanConfigInterfacesSvlTableRowEditorFilterIdFilter ID (FID) used in Shared VLAN Learning. Zero or more VLANs may
map into the same FID.rw CIE1000Unsigned16 (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.3.2 |
cie1000VlanConfigInterfacesSvlTableRowEditorActionActionrw CIE1000RowEditorState (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.2.2.3.100 |
cie1000VlanStatus OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.13.1.3 |
cie1000VlanStatusInterfaces OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.13.1.3.1 |
cie1000VlanStatusInterfacesTableTable of per-interface (port) status. SEQUENCE OF CIE1000VlanStatusInterfacesEntry .1.3.6.1.4.1.9.9.832.1.13.1.3.1.1 |
cie1000VlanStatusInterfacesEntryEach row contains the VLAN configuration for a port interface for a
given VLAN user. CIE1000VlanStatusInterfacesEntry .1.3.6.1.4.1.9.9.832.1.13.1.3.1.1.1 |
cie1000VlanStatusInterfacesIfIndexLogical interface index.ro CIE1000InterfaceIndex (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.3.1.1.1.1 |
cie1000VlanStatusInterfacesVlanUserVLAN user.ro CIE1000VlanUserType .1.3.6.1.4.1.9.9.832.1.13.1.3.1.1.1.2 |
cie1000VlanStatusInterfacesPvidPort VLAN ID set by this user.ro CIE1000Vlan (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.3.1.1.1.3 |
cie1000VlanStatusInterfacesUvidUntagged VLAN ID set by a user. This may only be populated by non-admin
users.ro CIE1000Vlan (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.3.1.1.1.4 |
cie1000VlanStatusInterfacesPortTypeVLAN Awareness and tag reaction set by this user.ro CIE1000VlanPortType .1.3.6.1.4.1.9.9.832.1.13.1.3.1.1.1.5 |
cie1000VlanStatusInterfacesIngressFilteringIngress filtering enabled or disabled by this user.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.832.1.13.1.3.1.1.1.6 |
cie1000VlanStatusInterfacesIngressAcceptanceVLAN tagging accepted upon ingress configured by this user.ro CIE1000VlanIngressAcceptance .1.3.6.1.4.1.9.9.832.1.13.1.3.1.1.1.7 |
cie1000VlanStatusInterfacesEgressTaggingEgress tagging configured by this user.ro CIE1000VlanEgressTagging .1.3.6.1.4.1.9.9.832.1.13.1.3.1.1.1.8 |
cie1000VlanStatusMemberships OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.13.1.3.2 |
cie1000VlanStatusMembershipsVlanTableTable of per-VLAN, per-VLAN user port memberships. SEQUENCE OF CIE1000VlanStatusMembershipsVlanEntry .1.3.6.1.4.1.9.9.832.1.13.1.3.2.1 |
cie1000VlanStatusMembershipsVlanEntryEach row contains a port list of VLAN memberships for a given VLAN and
VLAN user.The table is sparsely populated, so if a VLAN user doesn't
contribute, the row is non-existent. CIE1000VlanStatusMembershipsVlanEntry .1.3.6.1.4.1.9.9.832.1.13.1.3.2.1.1 |
cie1000VlanStatusMembershipsVlanVlanIdVLAN ID. Valid range is 1 - 4095.ro CIE1000Vlan (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.3.2.1.1.1 |
cie1000VlanStatusMembershipsVlanVlanUserVLAN user.ro CIE1000VlanUserType .1.3.6.1.4.1.9.9.832.1.13.1.3.2.1.1.2 |
cie1000VlanStatusMembershipsVlanPortListPort list.ro CIE1000PortList (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.13.1.3.2.1.1.3 |
cie1000VlanMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.13.2 |
cie1000VlanMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.13.2.1 |
cie1000VlanMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.13.2.2 |