CIE1000-PORT-MIB
This is a private version of the PORT MIB
Main OID:
cie1000PortMib.1.3.6.1.4.1.9.9.832.1.11
124
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
124 total| Object Name |
|---|
cie1000PortMibThis is a private version of the PORT MIB MODULE-IDENTITY .1.3.6.1.4.1.9.9.832.1.11 |
SNMPv2-CONFThis is a private version of the PORT MIB NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.832.1.11 |
cie1000PortMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.11.1 |
cie1000PortConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.11.1.2 |
cie1000PortConfigTableThis is a table of the port interface parameters SEQUENCE OF CIE1000PortConfigEntry .1.3.6.1.4.1.9.9.832.1.11.1.2.1 |
cie1000PortConfigEntryEach port interface has a set of parameters CIE1000PortConfigEntry .1.3.6.1.4.1.9.9.832.1.11.1.2.1.1 |
cie1000PortConfigIfIndexLogical interface number.ro CIE1000InterfaceIndex (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.11.1.2.1.1.1 |
cie1000PortConfigShutdownControls whether interface is shutdown or powered up. Set to TRUE in
order to power down the interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.832.1.11.1.2.1.1.2 |
cie1000PortConfigSpeedControls the port speed and duplex.rw CIE1000PortSpeed .1.3.6.1.4.1.9.9.832.1.11.1.2.1.1.3 |
cie1000PortConfigAdvertiseDisabledIn auto mode, bitmask that allows features not to be advertised.
Bit 0: Disable half duplex advertising.
Bit 1: Disable full duplex advertising.
Bit 4: Disable 1G advertising.
Bit 6: Disable 100M advertising.
Bit 7: Disable 10M advertising.
When not in auto mode, the value shall be zero.rw CIE1000Unsigned8 (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.11.1.2.1.1.4 |
cie1000PortConfigMediaTypeControls the port media type.rw CIE1000PortMedia .1.3.6.1.4.1.9.9.832.1.11.1.2.1.1.5 |
cie1000PortConfigFCControls the port flow control mode.rw CIE1000PortFc .1.3.6.1.4.1.9.9.832.1.11.1.2.1.1.6 |
cie1000PortConfigMTUControls the port's Maximum Transmission Unit.rw Unsigned32 .1.3.6.1.4.1.9.9.832.1.11.1.2.1.1.7 |
cie1000PortConfigExcessiveRestartTRUE to restart half-duplex back-off algorithm after 16 collisions.
FALSE to discard frame after 16 collisionsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.832.1.11.1.2.1.1.8 |
cie1000PortConfigPFC802.1Qbb Priority Flow Control bitmask, one bit for each prioritet.E.g.
0x01 = prio 0, 0x80 = prio 7, 0xFF = prio 0-7rw CIE1000Unsigned8 (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.11.1.2.1.1.9 |
cie1000PortConfigFrameLengthCheckTRUE to enforce 802.3 frame length check (from Ethertype field). If
enabled frames with length that doesn't match the frame length field
will be dropped.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.832.1.11.1.2.1.1.10 |
cie1000PortStatus OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.11.1.3 |
cie1000PortStatusInformationTableThis table represents the status of the ports SEQUENCE OF CIE1000PortStatusInformationEntry .1.3.6.1.4.1.9.9.832.1.11.1.3.1 |
cie1000PortStatusInformationEntryEach port interface has a set of status parameters CIE1000PortStatusInformationEntry .1.3.6.1.4.1.9.9.832.1.11.1.3.1.1 |
cie1000PortStatusInformationIfIndexLogical interface number.ro CIE1000InterfaceIndex (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.1 |
cie1000PortStatusInformationLinkShows whether interface has link.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.2 |
cie1000PortStatusInformationFdxShows whether interface is running in full duplex.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.3 |
cie1000PortStatusInformationFiberShows whether interface is a fiber link (fiber SFP or cu SFP).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.4 |
cie1000PortStatusInformationSpeedShows the current interface speed.ro CIE1000PortStatusSpeed (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.5 |
cie1000PortStatusInformationSFPTypeShows the current interface SFP type.ro CIE1000SfpTransceiver (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.6 |
cie1000PortStatusInformationSFPVendorNameShows the SFP vendor name.ro CIE1000DisplayString .1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.7 |
cie1000PortStatusInformationSFPVendorPNShows the SFP vendor Product Number.ro CIE1000DisplayString .1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.8 |
cie1000PortStatusInformationSFPVendorRevShows the SFP vendor Revision.ro CIE1000DisplayString .1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.9 |
cie1000PortStatusInformationSFPVendorSNShows the SFP vendor Serial Number.ro CIE1000DisplayString .1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.10 |
cie1000PortStatusInformationRxUtilizationRx utilization in percent.ro Unsigned32 .1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.11 |
cie1000PortStatusInformationTxUtilizationTx utilization in percent.ro Unsigned32 .1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.12 |
cie1000PortStatusInformationRxErrorUtilizationRx error utilization in percent.ro Unsigned32 .1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.13 |
cie1000PortStatusInformationTxErrorUtilizationTx error utilization in percent.ro Unsigned32 .1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.14 |
cie1000PortStatusVeriPhyResult OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.11.1.3.3 |
cie1000PortStatusVeriPhyResultTableThis table represents the VeriPhy result from the last VeriPhy run for
the interface SEQUENCE OF CIE1000PortStatusVeriPhyResultEntry .1.3.6.1.4.1.9.9.832.1.11.1.3.3.1 |
cie1000PortStatusVeriPhyResultEntryEach port has a set of VeriPhy results CIE1000PortStatusVeriPhyResultEntry .1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1 |
cie1000PortStatusVeriPhyResultIfIndexLogical interface number.ro CIE1000InterfaceIndex (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1.1 |
cie1000PortStatusVeriPhyResultVeriPhyStatusPairAVeriPhy status for the cable pair
0 - Cable is Correctly terminated pair
1 - Open pair
2 - Shorted pair
4 - Abnormal termination
8 - Cross-pair short to pair A
9 - Cross-pair short to pair B
10 - Cross-pair short to pair C
11 - Cross-pair short to pair D
12 - Abnormal cross-pair coupling - pair A
13 - Abnormal cross-pair coupling - pair B
14 - Abnormal cross-pair coupling - pair C
15 - Abnormal cross-pair coupling - pair Dro CIE1000PortPhyVeriPhyStatus .1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1.2 |
cie1000PortStatusVeriPhyResultVeriPhyStatusPairBVeriPhy status for the cable pair
0 - Cable is Correctly terminated pair
1 - Open pair
2 - Shorted pair
4 - Abnormal termination
8 - Cross-pair short to pair A
9 - Cross-pair short to pair B
10 - Cross-pair short to pair C
11 - Cross-pair short to pair D
12 - Abnormal cross-pair coupling - pair A
13 - Abnormal cross-pair coupling - pair B
14 - Abnormal cross-pair coupling - pair C
15 - Abnormal cross-pair coupling - pair Dro CIE1000PortPhyVeriPhyStatus .1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1.3 |
cie1000PortStatusVeriPhyResultVeriPhyStatusPairCVeriPhy status for the cable pair
0 - Cable is Correctly terminated pair
1 - Open pair
2 - Shorted pair
4 - Abnormal termination
8 - Cross-pair short to pair A
9 - Cross-pair short to pair B
10 - Cross-pair short to pair C
11 - Cross-pair short to pair D
12 - Abnormal cross-pair coupling - pair A
13 - Abnormal cross-pair coupling - pair B
14 - Abnormal cross-pair coupling - pair C
15 - Abnormal cross-pair coupling - pair Dro CIE1000PortPhyVeriPhyStatus .1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1.4 |
cie1000PortStatusVeriPhyResultVeriPhyStatusPairDVeriPhy status for the cable pair
0 - Cable is Correctly terminated pair
1 - Open pair
2 - Shorted pair
4 - Abnormal termination
8 - Cross-pair short to pair A
9 - Cross-pair short to pair B
10 - Cross-pair short to pair C
11 - Cross-pair short to pair D
12 - Abnormal cross-pair coupling - pair A
13 - Abnormal cross-pair coupling - pair B
14 - Abnormal cross-pair coupling - pair C
15 - Abnormal cross-pair coupling - pair Dro CIE1000PortPhyVeriPhyStatus .1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1.5 |
cie1000PortStatusVeriPhyResultVeriPhyLengthStatusPairAVeriPhy status cable length i meters for the cable pair. When VeriPhy
is completed, the cable diagnostics results is shown in the VeriPhy
status table. Note that VeriPHY is only accurate for cables of length 7
- 140 meters.
The resolution is 3 metersro CIE1000Unsigned8 (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1.6 |
cie1000PortStatusVeriPhyResultVeriPhyLengthStatusPairBVeriPhy status cable length i meters for the cable pair. When VeriPhy
is completed, the cable diagnostics results is shown in the VeriPhy
status table. Note that VeriPHY is only accurate for cables of length 7
- 140 meters.
The resolution is 3 metersro CIE1000Unsigned8 (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1.7 |
cie1000PortStatusVeriPhyResultVeriPhyLengthStatusPairCVeriPhy status cable length i meters for the cable pair. When VeriPhy
is completed, the cable diagnostics results is shown in the VeriPhy
status table. Note that VeriPHY is only accurate for cables of length 7
- 140 meters.
The resolution is 3 metersro CIE1000Unsigned8 (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1.8 |
cie1000PortStatusVeriPhyResultVeriPhyLengthStatusPairDVeriPhy status cable length i meters for the cable pair. When VeriPhy
is completed, the cable diagnostics results is shown in the VeriPhy
status table. Note that VeriPHY is only accurate for cables of length 7
- 140 meters.
The resolution is 3 metersro CIE1000Unsigned8 (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1.9 |
cie1000PortControl OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.11.1.4 |
cie1000PortControlStatisticsClear OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.11.1.4.1 |
cie1000PortControlStatisticsClearTableThis is a table to clear port Interface statistics SEQUENCE OF CIE1000PortControlStatisticsClearEntry .1.3.6.1.4.1.9.9.832.1.11.1.4.1.1 |
cie1000PortControlStatisticsClearEntryEach port has a set of control parameters CIE1000PortControlStatisticsClearEntry .1.3.6.1.4.1.9.9.832.1.11.1.4.1.1.1 |
cie1000PortControlStatisticsClearIfIndexLogical interface number.ro CIE1000InterfaceIndex (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.11.1.4.1.1.1.1 |
cie1000PortControlStatisticsClearStatisticsClearSet to TRUE to clear the statistics of an interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.832.1.11.1.4.1.1.1.2 |
cie1000PortControlVeriPhyStart OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.11.1.4.2 |
cie1000PortControlVeriPhyStartTableThis is a table to start VeriPhy for the interface SEQUENCE OF CIE1000PortControlVeriPhyStartEntry .1.3.6.1.4.1.9.9.832.1.11.1.4.2.1 |
cie1000PortControlVeriPhyStartEntryEach port has a set of control parameters CIE1000PortControlVeriPhyStartEntry .1.3.6.1.4.1.9.9.832.1.11.1.4.2.1.1 |
cie1000PortControlVeriPhyStartIfIndexLogical interface number.ro CIE1000InterfaceIndex (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.11.1.4.2.1.1.1 |
cie1000PortControlVeriPhyStartStartSet to TRUE to start VeriPHy for the interface.
When running 10 and 100 Mbps, ports will be linked down while running
VeriPHY. Therefore, running VeriPHY on a 10 or 100 Mbps management port
will cause the switch to stop responding until VeriPHY is complete.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.832.1.11.1.4.2.1.1.2 |
cie1000PortStatistics OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.11.1.5 |
cie1000PortStatisticsRmonStatisticsTableThis table represents the port interface RMON statistics counters SEQUENCE OF CIE1000PortStatisticsRmonStatisticsEntry .1.3.6.1.4.1.9.9.832.1.11.1.5.1 |
cie1000PortStatisticsRmonStatisticsEntryEach port interface has a set of statistics counters CIE1000PortStatisticsRmonStatisticsEntry .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1 |
cie1000PortStatisticsRmonStatisticsIfIndexLogical interface number.ro CIE1000InterfaceIndex (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.1 |
cie1000PortStatisticsRmonStatisticsRxDropEventsShows the number of frames discarded due to ingress congestion.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.2 |
cie1000PortStatisticsRmonStatisticsRxOctetsShows the number of received (good and bad) bytes. Includes FCS, but
excludes framing bits.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.3 |
cie1000PortStatisticsRmonStatisticsRxPktsShows the number of received (good and bad) packets.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.4 |
cie1000PortStatisticsRmonStatisticsRxBroadcastPktsShows the number of received (good and bad) broadcast packets.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.5 |
cie1000PortStatisticsRmonStatisticsRxMulticastPktsShows the number of received (good and bad) multicast packets.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.6 |
cie1000PortStatisticsRmonStatisticsRxCrcAlignErrPktsShows the number of frames received with CRC or alignment errors.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.7 |
cie1000PortStatisticsRmonStatisticsRxUndersizePktsShows the number of short frames (frames that are smaller than 64
bytes) received with valid CRC.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.8 |
cie1000PortStatisticsRmonStatisticsRxOversizePktsShows the number of long frames received with valid CRC.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.9 |
cie1000PortStatisticsRmonStatisticsRxFragmentsPktsShows the number of short frames (frames that are smaller than 64
bytes) received with invalid CRC.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.10 |
cie1000PortStatisticsRmonStatisticsRxJabbersPktsThe number of long frames (frames that are longer than the configured
maximum frame length for this interface) received with invalid CRC.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.11 |
cie1000PortStatisticsRmonStatisticsRx64PktsThe number of 64 bytes frames received.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.12 |
cie1000PortStatisticsRmonStatisticsRx65to127PktsThe number of received frames with size within 65 to 127 bytes.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.13 |
cie1000PortStatisticsRmonStatisticsRx128to255PktsThe number of received frames with size within 128 to 255 bytes.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.14 |
cie1000PortStatisticsRmonStatisticsRx256to511PktsThe number of received frames with size within 256 to 511 bytes.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.15 |
cie1000PortStatisticsRmonStatisticsRx512to1023PktsThe number of received frames with size within 512 to 1023 bytes.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.16 |
cie1000PortStatisticsRmonStatisticsRx1024to1518PktsThe number of received frames with size within 1024 to 1518 bytes.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.17 |
cie1000PortStatisticsRmonStatisticsRx1519PktsToMaxThe number of received frames with size larger than 1518 bytes.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.18 |
cie1000PortStatisticsRmonStatisticsTxDropEventsShows the number of frames discarded due to egress congestion.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.19 |
cie1000PortStatisticsRmonStatisticsTxOctetsShows the number of transmitted (good and bad) bytes. Includes FCS, but
excludes framing bits.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.20 |
cie1000PortStatisticsRmonStatisticsTxPktsShows the number of transmitted (good and bad) packets.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.21 |
cie1000PortStatisticsRmonStatisticsTxBroadcastPktsShows the number of transmitted (good and bad) broadcast packets.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.22 |
cie1000PortStatisticsRmonStatisticsTxMulticastPktsShows the number of transmitted (good and bad) multicast packets.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.23 |
cie1000PortStatisticsRmonStatisticsTx64PktsThe number of 64 bytes frames transmitted.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.24 |
cie1000PortStatisticsRmonStatisticsTx65to127PktsThe number of transmitted frames with size within 65 to 127 bytes.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.25 |
cie1000PortStatisticsRmonStatisticsTx128to255PktsThe number of transmitted frames with size within 128 to 255 bytes.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.26 |
cie1000PortStatisticsRmonStatisticsTx256to511PktsThe number of transmitted frames with size within 256 to 511 bytes.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.27 |
cie1000PortStatisticsRmonStatisticsTx512to1023PktsThe number of transmitted frames with size within 512 to 1023 bytes.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.28 |
cie1000PortStatisticsRmonStatisticsTx1024to1518PktsThe number of transmitted frames with size within 1024 to 1518 bytes.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.29 |
cie1000PortStatisticsRmonStatisticsTx1519PktsToMaxThe number of transmitted frames with size larger than 1518 bytes.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.30 |
cie1000PortStatisticsIfGroupStatisticsTableThis table represents the port interfaces group (RFC 2863) counters SEQUENCE OF CIE1000PortStatisticsIfGroupStatisticsEntry .1.3.6.1.4.1.9.9.832.1.11.1.5.2 |
cie1000PortStatisticsIfGroupStatisticsEntryEach port interface has a set of statistics counters CIE1000PortStatisticsIfGroupStatisticsEntry .1.3.6.1.4.1.9.9.832.1.11.1.5.2.1 |
cie1000PortStatisticsIfGroupStatisticsIfIndexLogical interface number.ro CIE1000InterfaceIndex (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.1 |
cie1000PortStatisticsIfGroupStatisticsRxOctetsShows the number of bytes received.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.2 |
cie1000PortStatisticsIfGroupStatisticsRxUnicastPktsShows the number of uni-cast frames received.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.3 |
cie1000PortStatisticsIfGroupStatisticsRxMulticastPktsShows the number of multi-cast frames received.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.4 |
cie1000PortStatisticsIfGroupStatisticsRxBroadcastPktsShows the number of broad-cast frames received.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.5 |
cie1000PortStatisticsIfGroupStatisticsRxNonUnicastPktsShows the number of non uni-cast frames received.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.6 |
cie1000PortStatisticsIfGroupStatisticsRxDiscardsShows the number of received frames discarded.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.7 |
cie1000PortStatisticsIfGroupStatisticsRxErrorsShows the number of frames with errors received.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.8 |
cie1000PortStatisticsIfGroupStatisticsTxOctetsShows the number of bytes transmitted.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.9 |
cie1000PortStatisticsIfGroupStatisticsTxUnicastPktsShows the number of uni-cast frames transmitted.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.10 |
cie1000PortStatisticsIfGroupStatisticsTxMulticastPktsShows the number of multi-cast frames transmitted.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.11 |
cie1000PortStatisticsIfGroupStatisticsTxBroadcastPktsShows the number of broad-cast frames transmitted.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.12 |
cie1000PortStatisticsIfGroupStatisticsTxNonUnicastPktsShows the number of non uni-cast frames transmitted.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.13 |
cie1000PortStatisticsIfGroupStatisticsTxDiscardPktsShows the number of discard frames which should been transmitted.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.14 |
cie1000PortStatisticsIfGroupStatisticsTxErrorPktsShows the number of frames transmit with error.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.15 |
cie1000PortStatisticsEthernetLikeStatisticsTableThis table represents the port Ethernet-like interfaces counters SEQUENCE OF CIE1000PortStatisticsEthernetLikeStatisticsEntry .1.3.6.1.4.1.9.9.832.1.11.1.5.3 |
cie1000PortStatisticsEthernetLikeStatisticsEntryEach port interface has a set of statistics counters CIE1000PortStatisticsEthernetLikeStatisticsEntry .1.3.6.1.4.1.9.9.832.1.11.1.5.3.1 |
cie1000PortStatisticsEthernetLikeStatisticsIfIndexLogical interface number.ro CIE1000InterfaceIndex (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.11.1.5.3.1.1 |
cie1000PortStatisticsEthernetLikeStatisticsRxPauseFramesThe number of pause frames received.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.3.1.2 |
cie1000PortStatisticsEthernetLikeStatisticsTxPauseFramesThe number of pause frames transmitted.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.3.1.3 |
cie1000PortStatisticsQueuesStatisticsTableThis table represents the port interfaces queues counters SEQUENCE OF CIE1000PortStatisticsQueuesStatisticsEntry .1.3.6.1.4.1.9.9.832.1.11.1.5.4 |
cie1000PortStatisticsQueuesStatisticsEntryEach port interface has a set of statistics counters CIE1000PortStatisticsQueuesStatisticsEntry .1.3.6.1.4.1.9.9.832.1.11.1.5.4.1 |
cie1000PortStatisticsQueuesStatisticsIfIndexLogical interface number.ro CIE1000InterfaceIndex (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.11.1.5.4.1.1 |
cie1000PortStatisticsQueuesStatisticsQueueQueue index.ro Integer32 .1.3.6.1.4.1.9.9.832.1.11.1.5.4.1.2 |
cie1000PortStatisticsQueuesStatisticsRxPrioThe number of frames received for the queue.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.4.1.3 |
cie1000PortStatisticsQueuesStatisticsTxPrioThe number of frames transmitted for the queue.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.4.1.4 |
cie1000PortStatisticsBridgeStatisticsTableThis table represents the port interface bridge counters SEQUENCE OF CIE1000PortStatisticsBridgeStatisticsEntry .1.3.6.1.4.1.9.9.832.1.11.1.5.5 |
cie1000PortStatisticsBridgeStatisticsEntryEach port interface has a set of statistics counters CIE1000PortStatisticsBridgeStatisticsEntry .1.3.6.1.4.1.9.9.832.1.11.1.5.5.1 |
cie1000PortStatisticsBridgeStatisticsIfIndexLogical interface number.ro CIE1000InterfaceIndex (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.11.1.5.5.1.1 |
cie1000PortStatisticsBridgeStatisticsRxBridgeDiscardThe number of bridge frames discarded.ro Counter64 .1.3.6.1.4.1.9.9.832.1.11.1.5.5.1.2 |
cie1000PortMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.11.2 |
cie1000PortMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.11.2.1 |
cie1000PortMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.11.2.2 |