CIE1000-POE-MIB
This is a private version of Power over Ethernet(PoE).
Main OID:
cie1000PoeMib.1.3.6.1.4.1.9.9.832.1.43
36
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
36 total| Object Name |
|---|
cie1000PoeMibThis is a private version of Power over Ethernet(PoE). MODULE-IDENTITY .1.3.6.1.4.1.9.9.832.1.43 |
SNMPv2-CONFThis is a private version of Power over Ethernet(PoE). NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.832.1.43 |
cie1000PoeMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.43.1 |
cie1000PoeCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.43.1.1 |
cie1000PoeCapabilitiesInterfaceTableThis is a table to interface capabilities SEQUENCE OF CIE1000PoeCapabilitiesInterfaceEntry .1.3.6.1.4.1.9.9.832.1.43.1.1.1 |
cie1000PoeCapabilitiesInterfaceEntryEach interface has a set of capability parameters CIE1000PoeCapabilitiesInterfaceEntry .1.3.6.1.4.1.9.9.832.1.43.1.1.1.1 |
cie1000PoeCapabilitiesInterfaceIfIndexLogical interface number.ro CIE1000InterfaceIndex (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.43.1.1.1.1.1 |
cie1000PoeCapabilitiesInterfacePoEIndicates whether interface is PoE capable or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.832.1.43.1.1.1.1.2 |
cie1000PoeConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.43.1.2 |
cie1000PoeConfigGlobals OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.43.1.2.1 |
cie1000PoeConfigGlobalsManagementModePoE management modes, six PoE management modes are supported.
CLASS_RESERVED: Maximum port power determined by class, and power is
managed according to power consumption. CLASS_CONSUMP: Maximum port
power determined by class, and power is managed according to reserved
power. ALLOCATED_RESERVED: Maximum port power determined by allocation,
and power is managed according to power consumption. ALLOCATED_CONSUMP:
Maximum port power determined by allocation, and power is managed
according to reserved power. LLDPMED_RESERVED: Maximum port power
determined by LLDP Media protocol, and power is managed according to
reserved power. LLDPMED_CONSUMP: Maximum port power determined by LLDP
Media protocol, and power is managed according to power consumption.rw CIE1000poeMgmtModeType .1.3.6.1.4.1.9.9.832.1.43.1.2.1.1 |
cie1000PoeConfigSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.43.1.2.2 |
cie1000PoeConfigSwitchParamTableThis is a table to configure PoE configurations for a switch. SEQUENCE OF CIE1000PoeConfigSwitchParamEntry .1.3.6.1.4.1.9.9.832.1.43.1.2.2.1 |
cie1000PoeConfigSwitchParamEntryEach switch has a set of PoE configurable parameters CIE1000PoeConfigSwitchParamEntry .1.3.6.1.4.1.9.9.832.1.43.1.2.2.1.1 |
cie1000PoeConfigSwitchParamSwitchIdUser Switch Id.ro Unsigned32 .1.3.6.1.4.1.9.9.832.1.43.1.2.2.1.1.1 |
cie1000PoeConfigSwitchParamMaxPowerThe Maximum power(in Watt) that the power sourcing equipment(such as
switch) can deliver.rw Integer32 .1.3.6.1.4.1.9.9.832.1.43.1.2.2.1.1.2 |
cie1000PoeConfigSwitchParamCapacitorDetectionIndicates whether switch capacitor detection feature is enabled or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.832.1.43.1.2.2.1.1.3 |
cie1000PoeConfigInterface OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.43.1.2.3 |
cie1000PoeConfigInterfaceParamTableThis is a table to configure PoE configurations for a specific
interface. SEQUENCE OF CIE1000PoeConfigInterfaceParamEntry .1.3.6.1.4.1.9.9.832.1.43.1.2.3.1 |
cie1000PoeConfigInterfaceParamEntryEach interface has a set of PoE configurable parameters CIE1000PoeConfigInterfaceParamEntry .1.3.6.1.4.1.9.9.832.1.43.1.2.3.1.1 |
cie1000PoeConfigInterfaceParamIfIndexLogical interface number.ro CIE1000InterfaceIndex (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.43.1.2.3.1.1.1 |
cie1000PoeConfigInterfaceParamModeSet PoE mode or disable PoE feature, two PoE modes are supported. POE:
Enables PoE based on IEEE 802.3af standard, and provides power up to
15.4W(154 deciwatt) of DC power to powered device. When changing to
standard mode the MaxPower is automatically adjust to 15.4 W, if it
currently exceeds 15.4 W. POE_PLUS: Enabled PoE based on IEEE 802.3at
standard, and provides power up to 30W(300 deciwatt) of DC power to
powered device.rw CIE1000poeModeType .1.3.6.1.4.1.9.9.832.1.43.1.2.3.1.1.2 |
cie1000PoeConfigInterfaceParamPrioritySet port power priority. Priority determines the order in which the
interfaces will receive power. Interfaces with a higher priority will
receive power before interfaces with a lower priority. PRIORITY_LOW
means lowest priority. PRIORITY_HIGH means medium priority.
PRIORITY_CRITICAL means highest priority.rw CIE1000poePowerPriorityType .1.3.6.1.4.1.9.9.832.1.43.1.2.3.1.1.3 |
cie1000PoeConfigInterfaceParamMaxPowerMaximum port power(in deciwatt) that can be delivered to remote device.
Maximum allowed values from 0 to 154 deciwatt in POE standard mode, and
from 0 to 300 deciwatt in POE plus mode.rw Integer32 .1.3.6.1.4.1.9.9.832.1.43.1.2.3.1.1.4 |
cie1000PoeStatus OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.43.1.3 |
cie1000PoeStatusInterfaceTableThis is a table to Power over Ethernet interface status SEQUENCE OF CIE1000PoeStatusInterfaceEntry .1.3.6.1.4.1.9.9.832.1.43.1.3.1 |
cie1000PoeStatusInterfaceEntryEach interface has a set of status parameters CIE1000PoeStatusInterfaceEntry .1.3.6.1.4.1.9.9.832.1.43.1.3.1.1 |
cie1000PoeStatusInterfaceIfIndexLogical interface number.ro CIE1000InterfaceIndex (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.1 |
cie1000PoeStatusInterfacePDClassPowered device(PD) negotiates a power class with sourcing
equipment(PSE) during the time of initial connection, each class have a
maximum supported power. Class assigned to PD is based on PD electrical
characteristics. Value -1 means either PD attached to the interface can
not advertise its power class or no PD detected or PoE is not supported
or PoE feature is disabled or unsupported PD class(classes 0-4 is
supported).ro Integer32 .1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.2 |
cie1000PoeStatusInterfaceCurrentStateIndicate port status. POWER_BUDGET_EXCEEDED: PoE is turned OFF due to
power budget exceeded on PSE. NO_PD_DETECTED: No PD detected. PD_ON:
PSE supplying power to PD through PoE. PD_OVERLOAD: PD consumes more
power than the maximum limit configured on the PSE port.ro CIE1000poeStatusType .1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.3 |
cie1000PoeStatusInterfacePowerConsumptionIndicates the power(in deciwatt) that the PD is consuming right now.ro Integer32 .1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.4 |
cie1000PoeStatusInterfacePowerReservedIndicates the power(in deciwatt) that the PD has requested/reserved.ro Integer32 .1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.5 |
cie1000PoeStatusInterfaceCurrentConsumptionIndicates the current(in mA) that the PD is consuming right now.ro Integer32 .1.3.6.1.4.1.9.9.832.1.43.1.3.1.1.6 |
cie1000PoeMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.43.2 |
cie1000PoeMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.43.2.1 |
cie1000PoeMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.43.2.2 |