CIE1000-MIRROR-MIB
This is a private version of Mirror
Main OID:
cie1000MirrorMib.1.3.6.1.4.1.9.9.832.1.15
30
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
30 total| Object Name |
|---|
cie1000MirrorMibThis is a private version of Mirror MODULE-IDENTITY .1.3.6.1.4.1.9.9.832.1.15 |
SNMPv2-CONFThis is a private version of Mirror NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.832.1.15 |
cie1000MirrorMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.15.1 |
cie1000MirrorCapabilities OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.15.1.1 |
cie1000MirrorCapabilitiesSessionCountMaxThe maximum number of sessions.ro Integer32 .1.3.6.1.4.1.9.9.832.1.15.1.1.1 |
cie1000MirrorCapabilitiesSessionSourceCountMaxThe maximum number of Mirror and RMirror source sessions.ro Integer32 .1.3.6.1.4.1.9.9.832.1.15.1.1.2 |
cie1000MirrorCapabilitiesRMirrorSuportIndicate if RMirror feature is supported or not. true means supported.
false means not supported.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.832.1.15.1.1.3 |
cie1000MirrorCapabilitiesInternalReflectorPortSupportIndicate if Internal reflector port is supported or not. true means
supported. false means not supported.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.832.1.15.1.1.4 |
cie1000MirrorCapabilitiesCpuMirrorSupportIndicate if mirroring CPU traffic is supported or not. true means
supported. false means not supported.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.832.1.15.1.1.5 |
cie1000MirrorConfig OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.15.1.2 |
cie1000MirrorConfigSessionTableThis is a table of configuration per session SEQUENCE OF CIE1000MirrorConfigSessionEntry .1.3.6.1.4.1.9.9.832.1.15.1.2.1 |
cie1000MirrorConfigSessionEntryEach session has a set of parameters CIE1000MirrorConfigSessionEntry .1.3.6.1.4.1.9.9.832.1.15.1.2.1.1 |
cie1000MirrorConfigSessionSessionIdSession ID. Valid range is (1..maximum). The maximum is
platform-specific and can be retrieved from the Mirror capabilities.ro Integer32 .1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.1 |
cie1000MirrorConfigSessionModeControls whether this session is enabled or disabled. true is to enable
the function. false is to disable it.
Multiple criteria must be fulfilled in order to be able to enable a
session.The criteria depend on the 'SessionType'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.2 |
cie1000MirrorConfigSessionTypeSession type in Mirror. 'mirror' means to do the Mirror function on the
device.
'rMirrorSource' means the device acts as source node for monitor flow.
'rMirrorDestination' means the device acts as end node for monitor
flow.rw CIE1000mirrorSessionType .1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.3 |
cie1000MirrorConfigSessionRMirrorVlanThe VLAN ID points out where the monitor packet will copy to. The
remote Mirror VLAN ID. Only used for RMirror types.
RMirror source session:
The mirrored traffic is copied onto this VLAN ID.
Traffic will flood to all ports that are members of the remote Mirror
VLAN ID.
RMirror destination session:
The #destination_port_list contains the port(s) that the Mirror VLAN
will be copied to
in addition to ports that are already configured (through the VLAN
module) to be members of this VLAN.rw CIE1000Unsigned16 (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.4 |
cie1000MirrorConfigSessionReflectorPortA reflector port is a port that the administrator may have to specify
in case the device does not have internal (unused) ports available.
Whether this is the case or not for this device can be derived from
Mirror capabilities. When 'ReflectorPort' is used, it must be specified
when an RMirror source session is enabled. In this case, the reflector
port will be shut down for normal front port usage, because the switch
needs a port where it can loop frames in order to get mirrored traffic
copied onto a particular VLAN ID (the 'RMirrorVlan').rw CIE1000InterfaceIndex (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.5 |
cie1000MirrorConfigSessionStripInnerTagThis configuration is used to strip the original VLAN ID of the
mirrored traffic or not. When it is set to TRUE, the the original VLAN
ID of the mirrored traffic will be stripped, otherwise the original
VLAN ID will be carried to destination interface. It may have to
specify in case the device does not have internal (unused) ports
available. Whether this is the case or not for this device can be
derived from Mirror capabilities.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.6 |
cie1000MirrorConfigSessionSourceVlans0KTo1KFirst quarter of bit-array indicating source VLAN list. All traffic in
the VLANs specified in this list will get mirrored onto either the
destination port (Mirror session) or the destination VLAN (RMirror
source session). It's a bit-mask that indicates the VLANs. A '1'
indicates the VLAN ID is selected, a '0' indicates that the VLAN ID
isn't selected.rw CIE1000VlanListQuarter (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.7 |
cie1000MirrorConfigSessionSourceVlans1KTo2KSecond quarter of bit-array indicating source VLAN list. All traffic in
the VLANs specified in this list will get mirrored onto either the
destination port (Mirror session) or the destination VLAN (RMirror
source session). It's a bit-mask that indicates the VLANs. A '1'
indicates the VLAN ID is selected, a '0' indicates that the VLAN ID
isn't selected.rw CIE1000VlanListQuarter (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.8 |
cie1000MirrorConfigSessionSourceVlans2KTo3KThird quarter of bit-array indicating source VLAN list. All traffic in
the VLANs specified in this list will get mirrored onto either the
destination port (Mirror session) or the destination VLAN (RMirror
source session). It's a bit-mask that indicates the VLANs. A '1'
indicates the VLAN ID is selected, a '0' indicates that the VLAN ID
isn't selected.rw CIE1000VlanListQuarter (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.9 |
cie1000MirrorConfigSessionSourceVlans3KTo4KFourth quarter of bit-array indicating source VLAN list. All traffic in
the VLANs specified in this list will get mirrored onto either the
destination port (Mirror session) or the destination VLAN (RMirror
source session). It's a bit-mask that indicates the VLANs. A '1'
indicates the VLAN ID is selected, a '0' indicates that the VLAN ID
isn't selected.rw CIE1000VlanListQuarter (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.10 |
cie1000MirrorConfigSessionSourcePortListRxA bit-mask that controls whether a given port is enabled for mirroring
of incoming traffic. A '1' indicates that the port is included, whereas
a '0' indicates it isn't. Only source sessions (Mirror and RMirror
Source) use this value.rw CIE1000PortList (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.11 |
cie1000MirrorConfigSessionSourcePortListTxA bit-mask that controls whether a given port is enabled for mirroring
of outgoing traffic. A '1' indicates that the port is included, whereas
a '0' indicates it isn't. Only source sessions (Mirror and RMirror
Source) use this value.rw CIE1000PortList (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.12 |
cie1000MirrorConfigSessionCpuRxControls whether mirroring of traffic received by the internal CPU is
enabled or disabled. It is supported or not can be derived from Mirror
capabilities.Only source sessions (Mirror and RMirror Source) use this
value.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.13 |
cie1000MirrorConfigSessionCpuTxControls whether mirroring of traffic transmitted by the internal CPU
is enabled or disabled. It is supported or not can be derived from
Mirror capabilities.Only source sessions (Mirror and RMirror Source)
use this value.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.14 |
cie1000MirrorConfigSessionDestinationPortListDestination port list implemented as a bit-mask, where a '1' indicates
that the port is included and a '0' indicates that it isn't. Only used
in plain Mirror sessions and RMirror destination sessions.
Mirror session:
At most one bit may be set in this mask.
RMirror destination session:
Zero or more bits may be set in this mask.rw CIE1000PortList (CIE1000-TC) .1.3.6.1.4.1.9.9.832.1.15.1.2.1.1.15 |
cie1000MirrorMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.15.2 |
cie1000MirrorMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.15.2.1 |
cie1000MirrorMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.15.2.2 |