CIE1000-FIRMWARE-MIB
AI MIB Summary
The CIE1000-FIRMWARE-MIB module enables the monitoring and management of firmware revision levels, build identifiers, and update status for CIE1000 series hardware appliances via SNMP. It provides specific OID access to retrieve current firmware versions and detect version mismatches or upgrade requirements on the target network devices.
This is a private version of Firmware
Main OID:
cie1000FirmwareMib.1.3.6.1.4.1.9.9.832.1.28
33
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
33 total| Object Name |
|---|
cie1000FirmwareMibThis is a private version of Firmware MODULE-IDENTITY .1.3.6.1.4.1.9.9.832.1.28 |
SNMPv2-CONFThis is a private version of Firmware NOTIFICATION-TYPE .1.3.6.1.4.1.9.9.832.1.28 |
cie1000FirmwareMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.28.1 |
cie1000FirmwareStatus OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.28.1.3 |
cie1000FirmwareStatusImageTableThis is a table of status of images in flash. SEQUENCE OF CIE1000FirmwareStatusImageEntry .1.3.6.1.4.1.9.9.832.1.28.1.3.1 |
cie1000FirmwareStatusImageEntryEach entry has a set of image status. CIE1000FirmwareStatusImageEntry .1.3.6.1.4.1.9.9.832.1.28.1.3.1.1 |
cie1000FirmwareStatusImageNumberThe number of image. The number starts from 0.ro Integer32 .1.3.6.1.4.1.9.9.832.1.28.1.3.1.1.1 |
cie1000FirmwareStatusImageTypeImage type of the status. bootloader(0) is for boot loader.
activeFirmware(1) is for active (primary) firmware.
alternativeFirmware(2) is for alternative (backup) firmware.ro CIE1000FirmwareStatusImageEnum .1.3.6.1.4.1.9.9.832.1.28.1.3.1.1.2 |
cie1000FirmwareStatusImageNameImage name.ro CIE1000DisplayString .1.3.6.1.4.1.9.9.832.1.28.1.3.1.1.3 |
cie1000FirmwareStatusImageVersionImage version.ro CIE1000DisplayString .1.3.6.1.4.1.9.9.832.1.28.1.3.1.1.4 |
cie1000FirmwareStatusImageBuiltDateThe built date when the image is built.ro CIE1000DisplayString .1.3.6.1.4.1.9.9.832.1.28.1.3.1.1.5 |
cie1000FirmwareStatusImageCodeRevisionThe code revesion which the image is built.ro CIE1000DisplayString .1.3.6.1.4.1.9.9.832.1.28.1.3.1.1.6 |
cie1000FirmwareStatusImageUpload OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.28.1.3.2 |
cie1000FirmwareStatusImageUploadStatusThe status indicates the status of current upload operation. It is
updated automatically. Modifying this flag does not take any effect.
none(0) means no upload operation. success(1) means upload operation is
successful. inProgress(2) means current upload operation is in
progress. errIvalidIp(3) means upload operation is failed due to
invalid IP address. errTftpFailed(4) means upload operation is failed
due to failed TFTP operation. errBusy(5) means upload operation is
failed due to other upload in processing. errMemoryInsufficient(6)
means upload operation is failed due to memory insufficient.
errInvalidImage(7) means upload operation is failed due to invalid
image. errWriteFlash(8) means upload operation is failed due to failed
writing flash. errSameImageExisted(9) means upload operation is failed
because the upload image is the same as the one in flash.
errUnknownImage(10) means upload operation is failed because the type
of upload image is unknown. errFlashImageNotFound(11) means upload
operation is failed because the location in flash to upload the image
is not found. errFlashEntryNotFound(12) means upload operation is
failed because the corresponding entry in flash to upload the image is
not found. errCrc(13) means upload operation is failed due to incorrect
CRC in the upload image. errImageSize(14) means upload operation is
failed due to invalid image size. errEraseFlash(15) means upload
operation is failed due to failed erasing flash.
errIncorrectImageVersion(16) means upload operation is failed due to
incorrect version of the upload image. errDownloadUrl(17) means upload
operation is failed due to fail to download image from URL.
errInvalidUrl(18) means upload operation is failed due to invalid URL.
errInvalidFilename(19) means upload operation is failed due to invalid
filename of the upload image. errInvalidPath(20) means upload operation
is failed due to invalid path of the upload image.ro CIE1000FirmwareUploadStatusEnum .1.3.6.1.4.1.9.9.832.1.28.1.3.2.1 |
cie1000FirmwareStatusSwitchTableThis is a table of status of images in switch. SEQUENCE OF CIE1000FirmwareStatusSwitchEntry .1.3.6.1.4.1.9.9.832.1.28.1.3.3 |
cie1000FirmwareStatusSwitchEntryEach entry has a set of image status. CIE1000FirmwareStatusSwitchEntry .1.3.6.1.4.1.9.9.832.1.28.1.3.3.1 |
cie1000FirmwareStatusSwitchSwitchIdThe ID of switch.ro Integer32 .1.3.6.1.4.1.9.9.832.1.28.1.3.3.1.1 |
cie1000FirmwareStatusSwitchChipIdID of chip.ro CIE1000DisplayString .1.3.6.1.4.1.9.9.832.1.28.1.3.3.1.2 |
cie1000FirmwareStatusSwitchBoardTypeType of board.ro CIE1000DisplayString .1.3.6.1.4.1.9.9.832.1.28.1.3.3.1.3 |
cie1000FirmwareStatusSwitchPortCntCount of ports.ro Unsigned32 .1.3.6.1.4.1.9.9.832.1.28.1.3.3.1.4 |
cie1000FirmwareStatusSwitchProductProduct name.ro CIE1000DisplayString .1.3.6.1.4.1.9.9.832.1.28.1.3.3.1.5 |
cie1000FirmwareStatusSwitchVersionImage version.ro CIE1000DisplayString .1.3.6.1.4.1.9.9.832.1.28.1.3.3.1.6 |
cie1000FirmwareStatusSwitchBuiltDateThe built date when the image is built.ro CIE1000DisplayString .1.3.6.1.4.1.9.9.832.1.28.1.3.3.1.7 |
cie1000FirmwareControl OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.28.1.4 |
cie1000FirmwareControlGlobals OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.28.1.4.1 |
cie1000FirmwareControlGlobalsSwapFirmwareSwap firmware between active (primary) and alternative (backup). true
is to swap the firmware. false is to do nothing.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.832.1.28.1.4.1.1 |
cie1000FirmwareControlImageUpload OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.28.1.4.2 |
cie1000FirmwareControlImageUploadDoUploadAction to do upload image or not. true is to do the upload operation.
false is to do nothing. The upload operation may need longer time to
upload the image, so the SNMP timeout time needs to be modified
accordingly.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.9.9.832.1.28.1.4.2.1 |
cie1000FirmwareControlImageUploadImageTypeType of image to upload. bootloader(0) is to upload bootloader.
firmware(1) is to upload application firmware.rw CIE1000FirmwareUploadImageEnum .1.3.6.1.4.1.9.9.832.1.28.1.4.2.2 |
cie1000FirmwareControlImageUploadUrlThe location of image to upload. It is a specific character string that
constitutes a reference to a resource. Syntax:
<protocol>://[<username>[:<password>]@]<host>[:<port>][/<path>]/<file_name>
For example, tftp://10.10.10.10/new_image_path/new_image.dat,
http://username:password@10.10.10.10:80/new_image_path/new_image.dat. A
valid file name is a text string drawn from alphabet (A-Za-z), digits
(0-9), dot (.), hyphen (-), under score(_). The maximum length is 63
and hyphen must not be first character. The file name content that only
contains '.' is not allowed.rw CIE1000DisplayString .1.3.6.1.4.1.9.9.832.1.28.1.4.2.3 |
cie1000FirmwareMibConformance OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.28.2 |
cie1000FirmwareMibCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.28.2.1 |
cie1000FirmwareMibGroups OBJECT IDENTIFIER .1.3.6.1.4.1.9.9.832.1.28.2.2 |