Home/Catalog/CERENT-MSDWDM-MIB

CERENT-MSDWDM-MIB

This MIB module defines the managed objects for physical layer related interface configurations and objects for the protocol specific error counters for DWDM optical switches. This MIB contains four groups. The first group, cerentMsDwdmIfGroup, handles the physical layer related interface configurations. The second group, cerentMsDwdmOtnGroup, provides objects for configuring OTN (G.709) related thresholds and for collecting OTN (G.709) related performance statistics for the current and previous 15 min and 24 hour intervals. The third group, cerentMsDwdmFECGroup provides objects for monitoring FEC (Fault Error Correction) statistics for the current and previous 15 min and 24 hour intervals. It also contains objects for configuring FEC error thresholds. The fourth group,cerentMsDwdm8B10BGroup contains 8B10B counters, for the current and previous 15 min and 24 hour intervals for interfaces like Fiber Channel/Gig E.
Main OID:
cerentMsDwdmMIB.1.3.6.1.4.1.3607.1.10.80
189
Objects
Active
Status
6
Dependencies

Imported Objects

SNMPv2-SMI
SNMPv2-TC
SNMPv2-CONF
IF-MIB
CERENT-GLOBAL-REGISTRY
CERENT-TC

Objects

189 total
Object Name
cerentMsDwdmMIBThis MIB module defines the managed objects for physical layer related interface configurations and objects for the protocol specific error counters for DWDM optical switches. This MIB contains four groups. The first group, cerentMsDwdmIfGroup, handles the physical layer related interface configurations. The second group, cerentMsDwdmOtnGroup, provides objects for configuring OTN (G.709) related thresholds and for collecting OTN (G.709) related performance statistics for the current and previous 15 min and 24 hour intervals. The third group, cerentMsDwdmFECGroup provides objects for monitoring FEC (Fault Error Correction) statistics for the current and previous 15 min and 24 hour intervals. It also contains objects for configuring FEC error thresholds. The fourth group,cerentMsDwdm8B10BGroup contains 8B10B counters, for the current and previous 15 min and 24 hour intervals for interfaces like Fiber Channel/Gig E.
MODULE-IDENTITY
.1.3.6.1.4.1.3607.1.10.80
cerentMsDwdmMIBObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.3607.2.40
cerentMsDwdmIf
OBJECT IDENTIFIER
.1.3.6.1.4.1.3607.2.40.1
cMsDwdmIfConfigTableThis table allows physical layer related interface configurations on an interface.
SEQUENCE OF CMsDwdmIfConfigEntry
.1.3.6.1.4.1.3607.2.40.1.1
cMsDwdmIfConfigEntryA collection of objects for configuration on an interface.
CMsDwdmIfConfigEntry
.1.3.6.1.4.1.3607.2.40.1.1.1
cMsDwdmIfConfigProtocolThis object is used to specify the protocol of the data carried over the interface. This object applies to linecards which support a variety of protocols and allow dynamic configuration of the specific protocol to be monitored on the interface. The ifType value for such interfaces remains fixed.rw
ProtocolType
.1.3.6.1.4.1.3607.2.40.1.1.1.1
cMsDwdmIfConfigDataRateThis object allows the management client to set the data rate across the interface. passThru denotes 2R, Reamplification and reshaping. stm1 denotes 3R, Reamp, reshaping and reclocking. stm4 denotes 3R, Reamp, reshaping and reclocking. stm16 denotes 3R, Reamp, reshaping and reclocking. stm64 denotes 3R, Reamp, reshaping and reclocking. gigE denotes 3R, Reamp, reshaping and reclocking. tenGigE denotes 3R, Reamp, reshaping and reclocking. fc denotes 3R, Reamp, reshaping and reclocking. oneGfcFicon denotes 3R, Reamp, reshaping and reclocking. twoGfcFiconIsc3 denotes 3R, Reamp, reshaping and reclocking. escon denotes 2R, Reamp and reshaping. dv6000 denotes 2R, Reamp and reshaping. sdiD1Video denotes 2R, Reamp and reshaping. hdtv denotes 2R, Reamp and reshaping. oc3 denotes 3R, Reamp, reshaping and reclocking. oc12 denotes 3R, Reamp, reshaping and reclocking. oc48 denotes 3R, Reamp, reshaping and reclocking. oc192 denotes 3R, Reamp, reshaping and reclocking. infiniBand denotes 3R, Reamp, reshaping and reclocking. fe denotes 3R, Reamp, reshaping and reclocking. e3t3 denotes 3R, Reamp, reshaping and reclocking. oc3Ge denotes 3R, Reamp, reshaping and reclocking.rw
Enumeration
.1.3.6.1.4.1.3607.2.40.1.1.1.2
cMsDwdmIfConfigLoopbackThis object allows the management client to configure loopback for the client side or trunk side interfaces. 'noLoop' - No Loopback present. 'diagnosticLoop' - This is an internal loopback, where the data stream is looped from the transmit to receive section. It is used for hardware debug, bring-up and diagnostics. 'lineLoop' - In this mode, the receive data stream is looped back to the transmit side. 'otherLoop' - This indicates loopbacks not defined here. The default value of this object will be 'noLoop'.rw
Enumeration
.1.3.6.1.4.1.3607.2.40.1.1.1.3
cMsDwdmIfConfigWavelengthThis object allows the management client to configure the wavelength mode of operation to the applicable interfaces.rw
OpticalWavelength
.1.3.6.1.4.1.3607.2.40.1.1.1.4
cMsDwdmIfConfigOtnStatusThis object allows the management client to enable the OTN (G.709) on an applicable interface,by writing a value of 'true' to this object. To bypass the monitoring hardware, a value of 'false' is written to this object. This object is not applicable to client side interfaces.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.3607.2.40.1.1.1.5
cMsDwdmIfConfigFECStatusThis object allows the management client to enable gathering FEC ( Forward Error Correction ) counters on an applicable interface, by writing a value of 'true' to this object.To disable FEC, a value of 'false' must be written to this object. This object is not applicable to client side interfaces. This object is being replaced by cMsDwdmIfConfigFECMode and is going to become obsolete in the future releases.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.3607.2.40.1.1.1.6
cMsDwdmIfOpticsValidIntervalsThis object gives the number of contiguous 15 minute intervals for which valid Optical Monitor PM data is available for the particular interface. The value of this object will be n (where n is the maximum number of 15 minute intervals supported at this interface), unless the measurement was (re-)started within the last (nx15) minutes, in which case the value will be the number of 15 minute intervals for which the agent has some data.ro
Unsigned32
.1.3.6.1.4.1.3607.2.40.1.1.1.7
cMsDwdmIfOTNValidIntervalsThis object gives the number of contiguous 15 minute intervals for which valid OTN performance monitoring data is available for the particular interface. The value of this object will be n (where n is the maximum number of 15 minute intervals supported at this interface), unless the measurement was (re-)started within the last (nx15) minutes, in which case the value will be the number of 15 minute intervals for which the agent has some data. This object reports a value 0, if OTN is turned off.ro
Unsigned32
.1.3.6.1.4.1.3607.2.40.1.1.1.8
cMsDwdmIfFECValidIntervalsThis object gives the number of contiguous 15 minute intervals for which valid FEC PM data is available for the particular interface. The value of this object will be n (where n is the maximum number of 15 minute intervals supported at this interface), unless the measurement was (re-)started within the last (nx15) minutes, in which case the value will be the number of 15 minute intervals for which the agent has some data. This object reports a value 0, if FEC is turned off.ro
Unsigned32
.1.3.6.1.4.1.3607.2.40.1.1.1.9
cMsDwdmIfConfigFECModeThis object allows the management client to enable gathering FEC ( Forward Error Correction ) counters on an applicable interface, by writing a value of 'enableStandard' or 'enableEnhanced' to this object. To disable FEC, a value of 'disable' must be written to this object. This object is not applicable to client side interfaces.rw
Enumeration
.1.3.6.1.4.1.3607.2.40.1.1.1.10
cMsDwdmIfTransportTableThis table defines optical transport layer related interface configurations on an interface.
SEQUENCE OF CMsDwdmIfTransportEntry
.1.3.6.1.4.1.3607.2.40.1.2
cMsDwdmIfTransportEntryA collection of objects for configuration on an optical transport interface.
CMsDwdmIfTransportEntry
.1.3.6.1.4.1.3607.2.40.1.2.1
cMsDwdmIfTransportRingDirectionThis object is used to specify the ring directionality of the port. The ring directionality gives the configuration of the facing side: facing sides can be east going to west and west going to east.obsolete
RingDirection
.1.3.6.1.4.1.3607.2.40.1.2.1.1
cMsDwdmIfTransportPortRuleThis object is used to specify the type of the optical port. A transport optical port can assume one of the following values: input(1) input-express(2) output(3) output-express(4).ro
OpticalPortRule
.1.3.6.1.4.1.3607.2.40.1.2.1.2
cMsDwdmIfTransportPowerThis object is used to specify the optical power read at the photodiode of the port. The distinguished value of '-1000' indicates that the power cannot be read due to unavaible HW resource.ro
OpticalPowerInDbm
.1.3.6.1.4.1.3607.2.40.1.2.1.3
cMsDwdmIfTransportReferencePowerThis object is used to specify the optical transport reference power. This is the value of power the network element will expect on the photodiode. In case the user wants to refine this value the 'cMsDwdmIfTransportCalibratedPower' can be used to add an offset to the network element setup value.ro
OpticalPowerInDbm
.1.3.6.1.4.1.3607.2.40.1.2.1.4
cMsDwdmIfTransportCalibratedPowerThis object is used to specify the optical transport calibration power. This is the power offset that user contribute in case the 'reference' value setup by network element would be modified.rw
OpticalPowerInDbm
.1.3.6.1.4.1.3607.2.40.1.2.1.5
cMsDwdmIfTransportInsertionLossThis object is used to specify the value of Insertion Loss of the optical port.ro
OpticalAttenInDb
.1.3.6.1.4.1.3607.2.40.1.2.1.6
cMsDwdmIfTransportLaserStatusThis object is used to specify the status of the laser.ro
LaserStatus
.1.3.6.1.4.1.3607.2.40.1.2.1.7
cMsDwdmIfTransportAmplifierModeThis object is used to specify the working amplifier mode.rw
OpticalAmplifierMode
.1.3.6.1.4.1.3607.2.40.1.2.1.8
cMsDwdmIfTransportGainThis object is used to specify the value of the gain of an amplifierro
OpticalAttenInDb
.1.3.6.1.4.1.3607.2.40.1.2.1.9
cMsDwdmIfTransportReferenceTiltThis object is used to specify the amplifier tilt value calculated by the network element.ro
OpticalAttenInDb
.1.3.6.1.4.1.3607.2.40.1.2.1.10
cMsDwdmIfTransportCalibratedTiltThis object is used to specify the amplifier tilt offset added as offset by user in order to tune the network element calculated ('reference') valuerw
OpticalAttenInDb
.1.3.6.1.4.1.3607.2.40.1.2.1.11
cMsDwdmIfTransportDCULossThis object is used to specify the value of Insertion Loss measured for the Dispersion Compensation Unitro
OpticalAttenInDb
.1.3.6.1.4.1.3607.2.40.1.2.1.12
cMsDwdmIfTransportOSRIThis value indicates the status of the Optical Safety Remote Interlock Valid values are - enable(1) : the OSRI is enable disable(2) : the OSRI is disable none(3) : the OSRI functionality is not presentrw
Enumeration
.1.3.6.1.4.1.3607.2.40.1.2.1.13
cMsDwdmIfTransportExpectedGainThis object is used to specify the value of the expected gain of an amplifierrw
OpticalAttenInDb
.1.3.6.1.4.1.3607.2.40.1.2.1.14
cMsDwdmIfTransportSideIdentifierThis object is used to specify the facing side of the optical port.ro
SideIdentifier
.1.3.6.1.4.1.3607.2.40.1.2.1.15
cMsDwdmIfTransportAddPowerThis object is used to specify the ADD optical power read at the photodiode of the port. The distinguished value of '-1000' indicates that the power cannot be read due to unavaible HW resource.ro
OpticalPowerInDbm
.1.3.6.1.4.1.3607.2.40.1.2.1.16
cMsDwdmIfTransportOSCPowerThis object is used to specify the OSC optical power read at the photodiode of the port. The distinguished value of '-1000' indicates that the power cannot be read due to unavaible HW resource.ro
OpticalPowerInDbm
.1.3.6.1.4.1.3607.2.40.1.2.1.17
cMsDwdmIfTransportTDCUCompensationThis object is used to specify the TDCU Compensation value of the optical port belong to a TDCU card.ro
TDCUCompensation
.1.3.6.1.4.1.3607.2.40.1.2.1.18
cMsDwdmIfMultiplexSectionTableThis table defines optical multiplex section (band) layer related interface configurations on an interface.
SEQUENCE OF CMsDwdmIfMultiplexSectionEntry
.1.3.6.1.4.1.3607.2.40.1.3
cMsDwdmIfMultiplexSectionEntryA collection of objects for configuration on an optical multiplex section (band) interface.
CMsDwdmIfMultiplexSectionEntry
.1.3.6.1.4.1.3607.2.40.1.3.1
cMsDwdmIfMultiplexSectionRingDirectionThis object is used to specify the ring directionality of the port. The ring directionality gives the configuration of the facing side: facing sides can be east going to west and west going to east.obsolete
RingDirection
.1.3.6.1.4.1.3607.2.40.1.3.1.1
cMsDwdmIfMultiplexSectionPortRuleThis object is used to specify the type of the optical port. A Multiplex Section optical port can assume one of the following values: add(5) drop(6).ro
OpticalPortRule
.1.3.6.1.4.1.3607.2.40.1.3.1.2
cMsDwdmIfMultiplexSectionPowerThis object is used to specify the optical power read at the photodiode of the port. The distinguished value of '-1000' indicates that the power cannot be read due to unavaible HW resource.ro
OpticalPowerInDbm
.1.3.6.1.4.1.3607.2.40.1.3.1.3
cMsDwdmIfMultiplexSectionReferencePowerThis object is used to specify the optical Multiplex Section reference power. This is the value of power the network element will expect on the photodiode. In case the user wants to refine this value the 'cMsDwdmIfMultiplexSectionCalibratedPower' can be used to add an offset to the network element setup value.ro
OpticalPowerInDbm
.1.3.6.1.4.1.3607.2.40.1.3.1.4
cMsDwdmIfMultiplexSectionCalibratedPowerThis object is used to specify the optical MultiplexSection calibration power. This is the power offset that user contribute in case the 'reference' value setup by network element would be modified.rw
OpticalPowerInDbm
.1.3.6.1.4.1.3607.2.40.1.3.1.5
cMsDwdmIfMultiplexSectionInsertionLossThis object is used to specify the value of Insertion Loss of the optical port.ro
OpticalAttenInDb
.1.3.6.1.4.1.3607.2.40.1.3.1.6
cMsDwdmIfMultiplexSectionActualBandThis object is used to specify the value of Wavelength group which is tuned the optical port.ro
OpticalBand
.1.3.6.1.4.1.3607.2.40.1.3.1.7
cMsDwdmIfMultiplexSectionExpectedBandThis object is used to specify the value of Wavelength group that the user expects the optical port will assume.rw
OpticalBand
.1.3.6.1.4.1.3607.2.40.1.3.1.8
cMsDwdmIfMultiplexSectionSideIdentifierThis object is used to specify the facing side of the optical port.ro
SideIdentifier
.1.3.6.1.4.1.3607.2.40.1.3.1.9
cMsDwdmIfChannelTableThis table defines optical channel layer related interface configurations on an interface.
SEQUENCE OF CMsDwdmIfChannelEntry
.1.3.6.1.4.1.3607.2.40.1.4
cMsDwdmIfChannelEntryA collection of objects for configuration on an optical channel interface.
CMsDwdmIfChannelEntry
.1.3.6.1.4.1.3607.2.40.1.4.1
cMsDwdmIfChannelRingDirectionThis object is used to specify the ring directionality of the port. The ring directionality gives the configuration of the facing side: facing sides can be east going to west and west going to east.obsolete
RingDirection
.1.3.6.1.4.1.3607.2.40.1.4.1.1
cMsDwdmIfChannelPortRuleThis object is used to specify the type of the optical port. A Multiplex Section optical port can assume one of the following values: add(5) drop(6).ro
OpticalPortRule
.1.3.6.1.4.1.3607.2.40.1.4.1.2
cMsDwdmIfChannelPowerThis object is used to specify the optical power read at the photodiode of the port. The distinguished value of '-1000' indicates that the power cannot be read due to unavaible HW resource.ro
OpticalPowerInDbm
.1.3.6.1.4.1.3607.2.40.1.4.1.3
cMsDwdmIfChannelReferencePowerThis object is used to specify the optical Multiplex Section reference power. This is the value of power the network element will expect on the photodiode. In case the user wants to refine this value the 'cMsDwdmIfChannelCalibratedPower' can be used to add an offset to the network element setup value.ro
OpticalPowerInDbm
.1.3.6.1.4.1.3607.2.40.1.4.1.4
cMsDwdmIfChannelCalibratedPowerThis object is used to specify the optical Channel calibration power. This is the power offset that user contribute in case the 'reference' value setup by network element would be modified.rw
OpticalPowerInDbm
.1.3.6.1.4.1.3607.2.40.1.4.1.5
cMsDwdmIfChannelInsertionLossThis object is used to specify the value of Insertion Loss of the optical port.ro
OpticalAttenInDb
.1.3.6.1.4.1.3607.2.40.1.4.1.6
cMsDwdmIfChannelActualWavelengthThis object is used to specify the value of Wavelength that is tuned the optical port.ro
OpticalWavelength
.1.3.6.1.4.1.3607.2.40.1.4.1.7
cMsDwdmIfChannelExpectedWavelengthThis object is used to specify the value of Wavelength that the user expects the optical port will assume.rw
OpticalWavelength
.1.3.6.1.4.1.3607.2.40.1.4.1.8
cMsDwdmIfChannelSideIdentifierThis object is used to specify the facing side of the optical port.ro
SideIdentifier
.1.3.6.1.4.1.3607.2.40.1.4.1.9
cerentMsDwdmOtn
OBJECT IDENTIFIER
.1.3.6.1.4.1.3607.2.40.2
cMsDwdmOtnThresholdsTableThis table provides objects for configuring OTN ( G.709 ) thresholds on trunk side interfaces.
SEQUENCE OF CMsDwdmOtnThresholdsEntry
.1.3.6.1.4.1.3607.2.40.2.1
cMsDwdmOtnThresholdsEntryAn entry in the cMsDwdmOtnThresholdsTable.
CMsDwdmOtnThresholdsEntry
.1.3.6.1.4.1.3607.2.40.2.1.1
cMsDwdmOtnThreshMonTypeThis object is an index to the cMsDwdmOtnThresholdsTable. It is used to specify the type of monitoring threshold being set on an interface for OTN ( G.709 ) statistics.
MonitorType
.1.3.6.1.4.1.3607.2.40.2.1.1.1
cMsDwdmOtnThreshIntervalTypeThis object is an index to the cMsDwdmOtnThresholdsTable. It specifies the interval type and monitoring location for the performance statistics.
LocationAndIntervalType
.1.3.6.1.4.1.3607.2.40.2.1.1.2
cMsDwdmOtnThreshFCThis object is used to set the threshold for the number of failure counts on applicable trunk side interfaces.rw
Unsigned32
.1.3.6.1.4.1.3607.2.40.2.1.1.3
cMsDwdmOtnThreshESThis object is used to set the threshold for the number of Errored Seconds on applicable trunk side interfaces.rw
Unsigned32
.1.3.6.1.4.1.3607.2.40.2.1.1.4
cMsDwdmOtnThreshSESThis object is used to set the threshold for the number of Severely Errored Seconds on applicable trunk side interfaces.rw
Unsigned32
.1.3.6.1.4.1.3607.2.40.2.1.1.5
cMsDwdmOtnThreshUASThis object is used to set the threshold for the number of Unavailable Seconds on applicable trunk side interfaces.rw
Unsigned32
.1.3.6.1.4.1.3607.2.40.2.1.1.6
cMsDwdmOtnThreshBBEThis object is used to set the threshold for the number of Bit Block Errors on applicable trunk side interfaces.rw
Unsigned32
.1.3.6.1.4.1.3607.2.40.2.1.1.7
cMsDwdmOtnCurrentTableThis table contains the cumulative OTN (G.709) PM stats for the trunk side interfaces.
SEQUENCE OF CMsDwdmOtnCurrentEntry
.1.3.6.1.4.1.3607.2.40.2.2
cMsDwdmOtnCurrentEntryAn entry in the cMsDwdmOtnCurrentTable.
CMsDwdmOtnCurrentEntry
.1.3.6.1.4.1.3607.2.40.2.2.1
cMsDwdmOtnCurrentMonTypeThis object is an index to the cMsDwdmOtnCurrentTable. It is used to otain G.709 statistics for path, section and tcm ( tandem connection).
MonitorType
.1.3.6.1.4.1.3607.2.40.2.2.1.1
cMsDwdmOtnCurIntervalTypeThis object is an index to the cMsDwdmOtnCurrentTable. It specifies the interval type (farEnd/ nearEnd and 15 min/ 1 Day )for the table objects.
LocationAndIntervalType
.1.3.6.1.4.1.3607.2.40.2.2.1.2
cMsDwdmOtnCurrentFCThe counter associated with the number of failure counts encountered on this interface in the current interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.2.2.1.3
cMsDwdmOtnCurrentESThe counter associated with the number of Errored Seconds encountered on this interface in the current interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.2.2.1.4
cMsDwdmOtnCurrentSESThe counter associated with the number of Severely Errored Seconds encountered on this interface in the current interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.2.2.1.5
cMsDwdmOtnCurrentUASThe counter associated with the number of Unavailable Seconds encountered on this interface in the current interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.2.2.1.6
cMsDwdmOtnCurrentBBEThe counter associated with the number of Background Block Errors encountered on this interface in the current interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.2.2.1.7
cMsDwdmOtnCurrentESRThe counter associated with the Errored Seconds Ratio on this interface in the current interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.2.2.1.8
cMsDwdmOtnCurrentSESRThe counter associated with the Severely Errored Seconds ratio on this interface in the current interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.2.2.1.9
cMsDwdmOtnCurrentBBERThe counter associated with the Background Block Errors ratio on this interface in the current interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.2.2.1.10
cMsDwdmOtnIntervalTableThis table contains the cumulative OTN (G.709) PM stats for the trunk side interfaces.
SEQUENCE OF CMsDwdmOtnIntervalEntry
.1.3.6.1.4.1.3607.2.40.2.3
cMsDwdmOtnIntervalEntryAn entry in the cMsDwdmOtnIntervalTable.
CMsDwdmOtnIntervalEntry
.1.3.6.1.4.1.3607.2.40.2.3.1
cMsDwdmOtnIntervalMonTypeThis object is an index to the cMsDwdmOtnIntervalTable. It is used to otain G.709 statistics for path, section and tcm ( tandem connection).
MonitorType
.1.3.6.1.4.1.3607.2.40.2.3.1.1
cMsDwdmOtnIntervalTypeThis object is an index to the cMsDwdmOtnIntervalTable. It specifies the interval type (farEnd/ nearEnd and 15 min/ 1 Day )for the table objects.
LocationAndIntervalType
.1.3.6.1.4.1.3607.2.40.2.3.1.2
cMsDwdmOtnIntervalNumThis object is an index to the cMsDwdmOtnIntervalTable. This object gives the number of the interval. It is a number between 1 and 96, which identifies the interval for which the set of OTN performance values is available. The interval identified by 1 is the most recent 15 minute or 24 hour interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
Integer32
.1.3.6.1.4.1.3607.2.40.2.3.1.3
cMsDwdmOtnIntervalFCThe counter associated with the number of failure counts encountered on this interface in a particular interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.2.3.1.4
cMsDwdmOtnIntervalESThe counter associated with the number of Errored Seconds encountered on this interface in a particular interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.2.3.1.5
cMsDwdmOtnIntervalSESThe counter associated with the number of Severely Errored Seconds encountered on this interface in a particular interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.2.3.1.6
cMsDwdmOtnIntervalUASThe counter associated with the number of Unavailable Seconds encountered on this interface in a particular interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.2.3.1.7
cMsDwdmOtnIntervalBBEThe counter associated with the number of Background Block Errors encountered on this interface in a particular interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.2.3.1.8
cMsDwdmOtnIntervalESRThe counter associated with the Errored Seconds Ratio on this interface in a particular interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.2.3.1.9
cMsDwdmOtnIntervalSESRThe counter associated with the Severely Errored Seconds ratio on this interface in a particular interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.2.3.1.10
cMsDwdmOtnIntervalBBERThe counter associated with the Background Block Errors ratio on this interface in a particular interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.2.3.1.11
cMsDwdmOtnIntervalValidDataThis variable indicates if the data for this interval is valid.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.3607.2.40.2.3.1.12
cerentMsDwdmFEC
OBJECT IDENTIFIER
.1.3.6.1.4.1.3607.2.40.3
cMsDwdmFECThresholdsTableThis table contains the configurable thresholds for FEC ( Forward Error Correction ) statistics.
SEQUENCE OF CMsDwdmFECThresholdsEntry
.1.3.6.1.4.1.3607.2.40.3.1
cMsDwdmFECThresholdsEntryAn entry in the cMsDwdmFECThresholdsTable.
CMsDwdmFECThresholdsEntry
.1.3.6.1.4.1.3607.2.40.3.1.1
cMsDwdmFECThreshIntervalTypeThis object is an index to the cMsDwdmFECThreshTable. It gives the type of the interval for which the thresholds are being set.
CerentPeriod (CERENT-TC)
.1.3.6.1.4.1.3607.2.40.3.1.1.1
cMsDwdmFECThreshBitErrCorThis object sets the threshold value of the number of Bit Errors Corrected on an applicable trunk side interface.rw
Unsigned32
.1.3.6.1.4.1.3607.2.40.3.1.1.2
cMsDwdmFECThreshByteErrCorThis object sets the threshold value of the number of Byte Errors Corrected on an applicable trunk side interface.rw
Unsigned32
.1.3.6.1.4.1.3607.2.40.3.1.1.3
cMsDwdmFECThreshZeroErrDetThis object sets the threshold value of the number of zero bit errors detected on an applicable trunk side interface.rw
Unsigned32
.1.3.6.1.4.1.3607.2.40.3.1.1.4
cMsDwdmFECThreshOneErrDetThis object sets the threshold value of the number of one bit errors detected on an applicable trunk side interface.rw
Unsigned32
.1.3.6.1.4.1.3607.2.40.3.1.1.5
cMsDwdmFECThreshUncorWordsThis object sets the threshold value of the number of Uncorrectable Words on an applicable trunk side interface.rw
Unsigned32
.1.3.6.1.4.1.3607.2.40.3.1.1.6
cMsDwdmFECCurrentTableThis table contains the cumulative PM statistics for FEC ( Forward Error Correction ) on an applicable interface.
SEQUENCE OF CMsDwdmFECCurrentEntry
.1.3.6.1.4.1.3607.2.40.3.2
cMsDwdmFECCurrentEntryAn entry in the cMsDwdmFECCurrentTable.
CMsDwdmFECCurrentEntry
.1.3.6.1.4.1.3607.2.40.3.2.1
cMsDwdmFECCurIntervalTypeThis object is an index to the cMsDwdmFECCurrentTable. It gives the type of interval for which the FEC values have been collected.
CerentPeriod (CERENT-TC)
.1.3.6.1.4.1.3607.2.40.3.2.1.1
cMsDwdmFECCurrentBitErrCorThe counter associated with the number of Bit Errors Corrected on this interface in the current interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.3.2.1.2
cMsDwdmFECCurrentByteErrCorThe counter associated with the number of Byte Errors Corrected on this interface in the current interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.3.2.1.3
cMsDwdmFECCurrentZeroErrDetThe counter associated with the number of zero bit errors detected on this interface in the current interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.3.2.1.4
cMsDwdmFECCurrentOneErrDetThe counter associated with the number of one bit errors detected on this interface in the current interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.3.2.1.5
cMsDwdmFECCurrentUncorWordsThe counter associated with the number of Uncorrectable Words encountered on this interface in the current interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.3.2.1.6
cMsDwdmFECIntervalTableThis table contains the cumulative PM statistics for FEC ( Forward Error Correction ) on an applicable interface.
SEQUENCE OF CMsDwdmFECIntervalEntry
.1.3.6.1.4.1.3607.2.40.3.3
cMsDwdmFECIntervalEntryAn entry in the cMsDwdmFECIntervalTable.
CMsDwdmFECIntervalEntry
.1.3.6.1.4.1.3607.2.40.3.3.1
cMsDwdmFECIntervalTypeThis object is an index to the cMsDwdmFECIntervalTable. It gives the type of interval for which the FEC values have been collected.
CerentPeriod (CERENT-TC)
.1.3.6.1.4.1.3607.2.40.3.3.1.1
cMsDwdmFECIntervalNumThis object is an index to the cMsDwdmFECIntervalTable. It is a number between 1 and 96, which identifies the interval for which the set of FEC PM values is available. The interval identified by 1 is the most recent 15 minute or 24 hour interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
Integer32
.1.3.6.1.4.1.3607.2.40.3.3.1.2
cMsDwdmFECIntervalBitErrCorThe counter associated with the number of Bit Errors Corrected on this interface in a particular interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.3.3.1.3
cMsDwdmFECIntervalByteErrCorThe counter associated with the number of Byte Errors Corrected on this interface in a particular interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.3.3.1.4
cMsDwdmFECIntervalZeroErrDetThe counter associated with the number of zero bit errors detected on this interface in a particular interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.3.3.1.5
cMsDwdmFECIntervalOneErrDetThe counter associated with the number of one bit errors detected on this interface in a particular interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.3.3.1.6
cMsDwdmFECIntervalUncorWordsThe counter associated with the number of Uncorrectable Words encountered on this interface in a particular interval.ro
Counter32
.1.3.6.1.4.1.3607.2.40.3.3.1.7
cMsDwdmFECIntervalValidDataThis variable indicates if the data for this interval is valid.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.3607.2.40.3.3.1.8
cerentMsDwdm8B10B
OBJECT IDENTIFIER
.1.3.6.1.4.1.3607.2.40.4
c8B10BThresholdsTableThis table contains the configurable thresholds for the 8B10B stats.
SEQUENCE OF C8B10BThresholdsEntry
.1.3.6.1.4.1.3607.2.40.4.1
c8B10BThresholdsEntryAn entry in the c8B10BThresholds Table.
C8B10BThresholdsEntry
.1.3.6.1.4.1.3607.2.40.4.1.1
c8B10BThreshIntervalTypeThis object is an index to the c8B10BThresholdsTable. It gives the type of interval.
IntervalType
.1.3.6.1.4.1.3607.2.40.4.1.1.1
c8B10BThreshInvalidPktsThis object represents the lower word value of the threshold associated with the number of 8B10B invalid packets. The object c8B10BThreshIPOverflow contains the higher 32 bit value of this number.rw
Unsigned32
.1.3.6.1.4.1.3607.2.40.4.1.1.2
c8B10BThreshIPOverflowThis object represents the higher word value of the threshold associated with the number of 8B10B invalid packets. The object c8B10BThreshInvalidPkts contains the lower 32 bits of this number. If the threshold is greater than 4,294,967,295, the higher word value will be stored in this object.rw
Unsigned32
.1.3.6.1.4.1.3607.2.40.4.1.1.3
c8B10BThreshHCInvalidPktsThis object is used to obtain the value of threshold configured for the number of 8B10B Invalid Packets. This a High capacity ( 64 bits ) counter.ro
Counter64
.1.3.6.1.4.1.3607.2.40.4.1.1.4
c8B10BThreshValidPktsThis object represents the lower word value of the threshold associated with the number of 8B10B valid packets. The object c8B10BThreshVPOverflow contains the higher 32 bit value of this number.rw
Unsigned32
.1.3.6.1.4.1.3607.2.40.4.1.1.5
c8B10BThreshVPOverflowThis object represents the higher word value of the threshold associated with the number of 8B10B valid packets. The object c8B10BThreshValidPkts contains the lower 32 bits of this number. If the threshold is greater than 4,294,967,295, the higher word value will be stored in this object.rw
Unsigned32
.1.3.6.1.4.1.3607.2.40.4.1.1.6
c8B10BThreshHCValidPktsThis object is used to obtain the value of threshold configured for the number of 8B10B Valid Packets. This a High capacity ( 64 bits ) counter.ro
Counter64
.1.3.6.1.4.1.3607.2.40.4.1.1.7
c8B10BThreshIdleSetsThis object represents the lower word value of the threshold associated with the number of 8B10B idle sets. The object c8B10BThreshISOverflow contains the higher 32 bit value of this number.rw
Unsigned32
.1.3.6.1.4.1.3607.2.40.4.1.1.8
c8B10BThreshISOverflowThis object represents the higher word value of the threshold associated with the number of 8B10B idle sets. The object c8B10BThreshIdleSets contains the lower 32 bits of this number. If the threshold is greater than 4,294,967,295, the higher word value will be stored in this object.rw
Unsigned32
.1.3.6.1.4.1.3607.2.40.4.1.1.9
c8B10BThreshHCIdleSetsThis object is used to obtain the value of threshold configured for the number of 8B10B idle sets. This a High capacity ( 64 bits ) counter.ro
Counter64
.1.3.6.1.4.1.3607.2.40.4.1.1.10
c8B10BThreshNonIdleSetsThis object represents the lower word value of the threshold associated with the number of 8B10B non idle sets. The object c8B10BThreshNISOverflow contains the higher 32 bit value of this number.rw
Unsigned32
.1.3.6.1.4.1.3607.2.40.4.1.1.11
c8B10BThreshNISOverflowThis object represents the higher word value of the threshold associated with the number of 8B10B non idle sets. The object c8B10BThreshNonIdleSets contains the lower 32 bits of this number. If the threshold is greater than 4,294,967,295, the higher word value will be stored in this object.rw
Unsigned32
.1.3.6.1.4.1.3607.2.40.4.1.1.12
c8B10BThreshHCNonIdleSetsThis object is used to obtain the value of threshold configured for the number of 8B10B non idle sets. This a High capacity ( 64 bits ) counter.ro
Counter64
.1.3.6.1.4.1.3607.2.40.4.1.1.13
c8B10BThreshDataSetsThis object represents the lower word value of the threshold associated with the number of 8B10B data code groups. The object c8B10BThreshDSOverflow contains the higher 32 bit value of this number.rw
Unsigned32
.1.3.6.1.4.1.3607.2.40.4.1.1.14
c8B10BThreshDSOverflowThis object represents the higher word value of the threshold associated with the number of 8B10B data code groups. The object c8B10BThreshDataSets contains the lower 32 bits of this number. If the threshold is greater than 4,294,967,295, the higher word value will be stored in this object.rw
Unsigned32
.1.3.6.1.4.1.3607.2.40.4.1.1.15
c8B10BThreshHCDataSetsThis object is used to obtain the value of threshold configured for the number of 8B10B data code groups. This a High capacity ( 64 bits ) counter.ro
Counter64
.1.3.6.1.4.1.3607.2.40.4.1.1.16
c8B10BThreshCodeViolsThis object represents the lower word value of the threshold associated with the number of 8B10B coding violations encountered. The object c8B10BThreshCVOverflow contains the higher 32 bit value of this number.rw
Unsigned32
.1.3.6.1.4.1.3607.2.40.4.1.1.17
c8B10BThreshCVOverflowThis object represents the higher word value of threshold associated with the number of 8B10B code violations encountered. The object c8B10BThreshCodeViols contains the lower 32 bits of this number. If the threshold is greater than 4,294,967,295, the higher word value will be stored in this object.rw
Unsigned32
.1.3.6.1.4.1.3607.2.40.4.1.1.18
c8B10BThreshHCCodeViolsThis object is used to obtain the value of threshold configured for the number of 8B10B Coding Violations on this interface. This a High capacity ( 64 bits ) counter.ro
Counter64
.1.3.6.1.4.1.3607.2.40.4.1.1.19
c8B10BCurrentTableThis table contains the cumulative PM statistics for the Fiber Channel/ Gigabit Ethernet (8B10B) on the applicable interfaces.
SEQUENCE OF C8B10BCurrentEntry
.1.3.6.1.4.1.3607.2.40.4.2
c8B10BCurrentEntryAn entry in the c8B10BCurrentTable.
C8B10BCurrentEntry
.1.3.6.1.4.1.3607.2.40.4.2.1
c8B10BCurIntervalTypeThis object is an index to the c8B10BCurrentTable. It gives the type of interval for which 8B10B data has been collected.
IntervalType
.1.3.6.1.4.1.3607.2.40.4.2.1.1
c8B10BCurrentCodeViolsThis object gives the value of the number of 8B10B Coding Violations encountered on an interface for the current interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BCurrentCVOverflow. SNMP v2c or v3 managers can directly use c8B10BCurrentHCCodeViols, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.2.1.2
c8B10BCurrentCVOverflowThis object gives the higher word value the number of 8B10B Coding Violations encountered on an interface for the current interval. If the value of c8B10BCurrentCodeViols is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BCurrentHCCodeViols, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.2.1.3
c8B10BCurrentHCCodeViolsThe counter associated with the number of 8B10B coding violations encountered on this interface in the current interval. This is a High Capacity ( 64 bit ) counter.ro
Counter64
.1.3.6.1.4.1.3607.2.40.4.2.1.4
c8B10BCurrentValidPktsThis object gives the value of the number of 8B10B Valid Packets encountered on an interface for the current interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BCurrentVPOverflow. SNMP v2c or v3 managers can directly use c8B10BCurrentHCValidPkts, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.2.1.5
c8B10BCurrentVPOverflowThis object gives the higher word value the number of 8B10B valid packets encountered on an interface for the current interval. If the value of c8B10BCurrentValidPkts is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BCurrentHCValidPkts, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.2.1.6
c8B10BCurrentHCValidPktsThe counter associated with the number of 8B10B valid packets on this interface in the current interval. This is a High Capacity ( 64 bit ) counter.ro
Counter64
.1.3.6.1.4.1.3607.2.40.4.2.1.7
c8B10BCurrentInvalidPktsThis object gives the value of the number of 8B10B invalid packets encountered on an interface for the current interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BCurrentIPOverflow. SNMP v2c or v3 managers can directly use c8B10BCurrentHCInvalidPkts, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.2.1.8
c8B10BCurrentIPOverflowThis object gives the higher word value the number of 8B10B invalid packets encountered on an interface for the current interval. If the value of c8B10BCurrentInvalidPkts is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BCurrentHCInvalidPkts, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.2.1.9
c8B10BCurrentHCInvalidPktsThe counter associated with the number of 8B10B invalid packets encountered on this interface in the current interval. This is a High Capacity ( 64 bit ) counter.ro
Counter64
.1.3.6.1.4.1.3607.2.40.4.2.1.10
c8B10BCurrentIdleSetsThis object gives the value of the number of 8B10B Idle sets encountered on an interface for the current interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BCurrentISOverflow. SNMP v2c or v3 managers can directly use c8B10BCurrentHCIdleSets, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.2.1.11
c8B10BCurrentISOverflowThis object gives the higher word value the number of 8B10B idle sets encountered on an interface for the current interval. If the value of c8B10BCurrentIdleSets is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BCurrentHCIdleSets, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.2.1.12
c8B10BCurrentHCIdleSetsThe counter associated with the number of 8B10B idle sets encountered on this interface in the current interval. This is a High Capacity ( 64 bit ) counter.ro
Counter64
.1.3.6.1.4.1.3607.2.40.4.2.1.13
c8B10BCurrentNonIdleSetsThis object gives the value of the number of 8B10B non idle sets encountered on an interface for the current interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BCurrentNISOverflow. SNMP v2c or v3 managers can directly use c8B10BCurrentHCNonIdleSets, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.2.1.14
c8B10BCurrentNISOverflowThis object gives the higher word value the number of 8B10B non idle sets encountered on an interface for the current interval. If the value of c8B10BCurrentNonIdleSets is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BCurrentHCNonIdleSets, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.2.1.15
c8B10BCurrentHCNonIdleSetsThe counter associated with the number of 8B10B non-idle sets encountered on this interface in the current interval. This is a High Capacity ( 64 bit ) counter.ro
Counter64
.1.3.6.1.4.1.3607.2.40.4.2.1.16
c8B10BCurrentDataSetsThis object gives the value of the number of 8B10B data code groups encountered on an interface for the current interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BCurrentDSOverflow. SNMP v2c or v3 managers can directly use c8B10BCurrentHCDataSets, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.2.1.17
c8B10BCurrentDSOverflowThis object gives the higher word value the number of 8B10B data code groups encountered on an interface for the current interval. If the value of c8B10BCurrentDataSets is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BCurrentHCDataSets, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.2.1.18
c8B10BCurrentHCDataSetsThe counter associated with the number of 8B10B data code groups encountered on this interface in the current interval. This is a High Capacity ( 64 bit ) counter.ro
Counter64
.1.3.6.1.4.1.3607.2.40.4.2.1.19
c8B10BIntervalTableThis table contains the cumulative PM statistics for the Fiber Channel/ Gigabit Ethernet (8B10B) on the applicable interfaces.
SEQUENCE OF C8B10BIntervalEntry
.1.3.6.1.4.1.3607.2.40.4.3
c8B10BIntervalEntryAn entry in the c8B10BIntervalTable.
C8B10BIntervalEntry
.1.3.6.1.4.1.3607.2.40.4.3.1
c8B10BIntervalTypeThis object is an index to the c8B10BIntervalTable. It gives the type of interval for which 8B10B data has been collected.
IntervalType
.1.3.6.1.4.1.3607.2.40.4.3.1.1
c8B10BIntervalNumThis object gives the number of the interval. It is a number between 1 and 96, which identifies the interval for which the set of 8B10B performance values is available. The interval identified by 1 is the most recent 15 minute or 24 hour interval, and the interval identified by N is the interval immediately preceding the one identified by N-1.
Integer32
.1.3.6.1.4.1.3607.2.40.4.3.1.2
c8B10BIntervalCodeViolsThis object gives the value of the number of 8B10B Coding Violations encountered on an interface for a particular interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BIntervalCVOverflow. SNMP v2c or v3 managers can directly use c8B10BIntervalHCCodeViols, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.3.1.3
c8B10BIntervalCVOverflowThis object gives the higher word value the number of 8B10B Coding Violations encountered on an interface for a particular interval. If the value of c8B10BIntervalCodeViols is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BIntervalHCCodeViols, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.3.1.4
c8B10BIntervalHCCodeViolsThe counter associated with the number of 8B10B coding violations encountered on this interface in a particular interval. This is a High Capacity ( 64 bit ) counter.ro
Counter64
.1.3.6.1.4.1.3607.2.40.4.3.1.5
c8B10BIntervalValidPktsThis object gives the value of the number of 8B10B Valid Packets encountered on an interface for a particular interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BIntervalVPOverflow. SNMP v2c or v3 managers can directly use c8B10BIntervalHCValidPkts, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.3.1.6
c8B10BIntervalVPOverflowThis object gives the higher word value the number of 8B10B valid packets encountered on an interface for a particular interval. If the value of c8B10BIntervalValidPkts is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BIntervalHCValidPkts, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.3.1.7
c8B10BIntervalHCValidPktsThe counter associated with the number of 8B10B valid packets on this interface in a particular interval. This is a High Capacity ( 64 bit ) counter.ro
Counter64
.1.3.6.1.4.1.3607.2.40.4.3.1.8
c8B10BIntervalInvalidPktsThis object gives the value of the number of 8B10B invalid packets encountered on an interface for a particular interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BIntervalIPOverflow. SNMP v2c or v3 managers can directly use c8B10BIntervalHCInvalidPkts, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.3.1.9
c8B10BIntervalIPOverflowThis object gives the higher word value the number of 8B10B invalid packets encountered on an interface for a particular interval. If the value of c8B10BIntervalInvalidPkts is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BIntervalHCInvalidPkts, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.3.1.10
c8B10BIntervalHCInvalidPktsThe counter associated with the number of 8B10B invalid packets encountered on this interface in a particular interval. This is a High Capacity ( 64 bit ) counter.ro
Counter64
.1.3.6.1.4.1.3607.2.40.4.3.1.11
c8B10BIntervalIdleSetsThis object gives the value of the number of 8B10B Idle sets encountered on an interface for a particular interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BIntervalISOverflow. SNMP v2c or v3 managers can directly use c8B10BIntervalHCIdleSets, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.3.1.12
c8B10BIntervalISOverflowThis object gives the higher word value the number of 8B10B idle sets encountered on an interface for a particular interval. If the value of c8B10BIntervalIdleSets is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BIntervalHCIdleSets, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.3.1.13
c8B10BIntervalHCIdleSetsThe counter associated with the number of 8B10B idle sets encountered on this interface in a particular interval. This is a High Capacity ( 64 bit ) counter.ro
Counter64
.1.3.6.1.4.1.3607.2.40.4.3.1.14
c8B10BIntervalNonIdleSetsThis object gives the value of the number of 8B10B non idle sets encountered on an interface for a particular interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BIntervalNISOverflow. SNMP v2c or v3 managers can directly use c8B10BIntervalHCNonIdleSets, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.3.1.15
c8B10BIntervalNISOverflowThis object gives the higher word value the number of 8B10B non idle sets encountered on an interface for a particular interval. If the value of c8B10BIntervalNonIdleSets is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BIntervalHCNonIdleSets, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.3.1.16
c8B10BIntervalHCNonIdleSetsThe counter associated with the number of 8B10B non-idle sets encountered on this interface in a particular interval. This is a High Capacity ( 64 bit ) counter.ro
Counter64
.1.3.6.1.4.1.3607.2.40.4.3.1.17
c8B10BIntervalDataSetsThis object gives the value of the number of 8B10B data code groups encountered on an interface for a particular interval. This object only shows the lower word value of the counter.The high word value is given by c8B10BIntervalDSOverflow. SNMP v2c or v3 managers can directly use c8B10BIntervalHCDataSets, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.3.1.18
c8B10BIntervalDSOverflowThis object gives the higher word value the number of 8B10B data code groups encountered on an interface for a particular interval. If the value of c8B10BIntervalDataSets is greater than 4,294,967,295, the higher word value will be stored in this object. SNMP v2c or v3 managers can directly use c8B10BIntervalHCDataSets, which is a 64 bit counter.ro
Counter32
.1.3.6.1.4.1.3607.2.40.4.3.1.19
c8B10BIntervalHCDataSetsThe counter associated with the number of 8B10B data code groups encountered on this interface in a particular interval. This is a High Capacity ( 64 bit ) counter.ro
Counter64
.1.3.6.1.4.1.3607.2.40.4.3.1.20
c8B10BIntervalValidDataThis variable indicates if the data for this interval is valid.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.3607.2.40.4.3.1.21
cerentMsDwdmMIBConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.3607.5.30
cerentMsDwdmMIBCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.3607.5.30.1
cerentMsDwdmMIBGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.3607.5.30.2
CERENT-MSDWDM-MIB - SNMP MIB Reference | MIBs Explorer