CERENT-IF-EXT-MIB
AI MIB Summary
The CERENT-IF-EXT-MIB extends the standard interface management capabilities for Cerent Corporation optical transport equipment, specifically providing vendor-specific objects to monitor interface status, error counters, and physical layer parameters beyond the scope of standard MIB-II. This module enables granular visibility into the operational state and performance metrics of Cerent's SONET/SDH and OTN interface cards.
This module defines objects for managing interfaces.
Main OID:
cerentIfExtMIB.1.3.6.1.4.1.3607.1.10.140
12
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
12 total| Object Name |
|---|
cerentIfExtMIBThis module defines objects for managing interfaces. MODULE-IDENTITY .1.3.6.1.4.1.3607.1.10.140 |
cerentIfExtMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3607.2.100 |
cerentIfExtTableThis table contains one row per interface. SEQUENCE OF CerentIfExtEntry .1.3.6.1.4.1.3607.2.100.10 |
cerentIfExtEntryRow definition for cerentIfExtTable CerentIfExtEntry .1.3.6.1.4.1.3607.2.100.10.1 |
cerentIfExtPreServiceAlarmSuppressionThis object can be set through a management interface. When the administrative state of this interface is 'down', the value of this object does not have any impact. When the administrative state of this interface is 'up', if this object has a value of 'false', an alarm on this interface will be reported. If the value of this object is 'true' then all alarms on this interface will be suppressed. If the interface has a good signal, the soak timer will be started, if the port is faulted before the soak timer expires, the soak timer will be reset to the provisioned maximum value. If the soak timer expires then the value of this object is automatically set to 'false'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.3607.2.100.10.1.10 |
cerentIfExtConfiguredSoakTimeThis is the configured maximum value of the soak timer for this interface.rw Integer32 UNITS "minutes" .1.3.6.1.4.1.3607.2.100.10.1.20 |
cerentIfExtCurrentSoakTimeThis is the current value of the soak timer for this interface. The difference between cerntIfExtConfiguredSoakTime and this object gives the time duration for which this interface has had a good signal.ro Integer32 UNITS "minutes" .1.3.6.1.4.1.3607.2.100.10.1.30 |
cerentIfExtMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.3607.5.90 |
cerentIfExtMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.3607.5.90.1 |
cerentIfExtMIBComplianceDescribes the requirements for conformance to the High Capacity Media Independent Group. Unknown .1.3.6.1.4.1.3607.5.90.1.1 |
cerentIfExtMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.3607.5.90.2 |
cerentIfExtGroupThe objects for storing all the current alarm thresholds Unknown .1.3.6.1.4.1.3607.5.90.2.10 |