CERENT-FC-MIB
This MIB module defines the managed objects for performance monitoring of supported Fibre Channel interfaces.
Main OID:
cerentFcMIB.1.3.6.1.4.1.3607.1.10.100
138
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
138 total| Object Name |
|---|
cerentFcMIBThis MIB module defines the managed objects for performance
monitoring of supported Fibre Channel interfaces. MODULE-IDENTITY .1.3.6.1.4.1.3607.1.10.100 |
cerentFcMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.3607.2.60 |
cerentFc OBJECT IDENTIFIER .1.3.6.1.4.1.3607.2.60.1 |
cFcStatsTableThis table reports the current values of the Fibre channel
stats on the supported interfaces. SEQUENCE OF CFcStatsEntry .1.3.6.1.4.1.3607.2.60.1.1 |
cFcStatsEntryA collection of Fibre Channel statisctics on an interface. CFcStatsEntry .1.3.6.1.4.1.3607.2.60.1.1.1 |
cFcStatsInvalidOrdSetsThis object gives the number of invalid
ordered sets encountered on this interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsInvalidOrdSetsHigh.
SNMP v2c or v3 managers can directly use
cFcStatsInvalidOrdSetsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.10 |
cFcStatsInvalidOrdSetsHighThis object gives the higher word value the number of
invalid ordered sets on the particular interface.
If the value of cFcStatsInvalidOrdSets
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsInvalidOrdSetsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.20 |
cFcStatsEncodingDispErrThis object gives the number of encoding
disparity errors encountered on this interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsEncodingDispErrHigh.
SNMP v2c or v3 managers can directly use
cFcStatsEncodingDispErrHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.30 |
cFcStatsEncodingDispErrHighThis object gives the higher word value the number of
encoding disparity errors on the particular interface.
If the value of cFcStatsEncodingDispErr
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsEncodingDispErrHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.40 |
cFcStatsInTotalErrThis object gives the value of the total number of
errors encountered on the particular interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsInTotalErrHigh.
SNMP v2c or v3 managers can directly use
cFcStatsInTotalErrHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.50 |
cFcStatsInTotalErrHighThis object gives the higher word value the total number
of errors encountered on the particular interface.
If the value of cFcStatsInTotalErr
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsInTotalErrHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.60 |
cFcStatsInFramesTruncThis object gives the value of the number of fibre
channel truncated frames received on this interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsInFramesTruncHigh.
SNMP v2c or v3 managers can directly use
cFcStatsInFramesTruncHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.70 |
cFcStatsInFramesTruncHighThis object gives the higher word value the number of
fibre channel truncated frames received on this interface.
If the value of cFcStatsInFramesTrunc
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsInFramesTruncHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.80 |
cFcStatsInFramesTooLongThis object gives the number of
fibre channel frames received on this interface
with a length greater than what was agreed to.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsInFramesTooLongHigh.
SNMP v2c or v3 managers can directly use
cFcStatsInFramesTooLongHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.90 |
cFcStatsInFramesTooLongHighThis object gives the higher word value the number of
fibre channel frames received on this interface
with a length greater than what was agreed to.
If the value of cFcStatsInFramesTooLong
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsInFramesTooLongHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.100 |
cFcStatsInFramesBadCRCThe counter associated with the number of frames received
with invalid CRC, on this interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsInFramesBadCRCHigh.
SNMP v2c or v3 managers can directly use
cFcStatsInFramesBadCRCHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.110 |
cFcStatsInFramesBadCRCHighThis object gives the higher word value of the number of
frames received with invalid CRC, on this interface.
If the value of cFcStatsInFramesBadCRC
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsInFramesBadCRCHigh, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.120 |
cFcStatsInFramesThe counter associated with the number of
fibre channel frames received on this interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsInFramesHigh.
SNMP v2c or v3 managers can directly use
cFcStatsInFramesHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.130 |
cFcStatsInFramesHighThis object gives the higher word value the number of
fibre channel frames received on this interface.
If the value of cFcStatsInFrames
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsInFramesHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.140 |
cFcStatsInElementsThis object gives the value of the number of
received bytes on the particular interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsInElementsHigh.
SNMP v2c or v3 managers can directly use
cFcStatsInElementsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.150 |
cFcStatsInElementsHighThis object gives the higher word value the number of
received bytes on the particular interface.
If the value of cFcStatsInElements
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsInElementsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.160 |
cFcStatsInDiscardsThis object gives the value of the number of
received frames on this interface that were
discarded.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsInDiscardsHigh.
SNMP v2c or v3 managers can directly use
cFcStatsInDiscardsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.170 |
cFcStatsInDiscardsHighThis object gives the higher word value the number of
received frames discarded on the particular interface.
If the value of cFcStatsInDiscards
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsInDiscardsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.180 |
cFcStatsOutFramesBadCRCThis object gives the number of frames
transmitted with invalid CRC, on this interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsOutFramesBadCRCHigh.
SNMP v2c or v3 managers can directly use
cFcStatsOutFramesBadCRCHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.190 |
cFcStatsOutFramesBadCRCHighThis object gives the higher word value the number of
frames transmitted with invalid CRC, on this interface.
If the value of cFcStatsOutFramesBadCRC
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsOutFramesBadCRCHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.200 |
cFcStatsOutFramesThis object gives the number of
fibre channel frames transmitted on this interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsOutFramesHigh.
SNMP v2c or v3 managers can directly use
cFcStatsOutFramesHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.210 |
cFcStatsOutFramesHighThis object gives the higher word value of the number
of fibre channel frames transmitted on this interface.
If the value of cFcStatsOutFrames
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsOutFramesHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.220 |
cFcStatsOutElementsThis object gives the value of the number of
trasmitted bytes on the particular interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsOutElementsHigh.
SNMP v2c or v3 managers can directly use
cFcStatsOutElementsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.230 |
cFcStatsOutElementsHighThis object gives the higher word value the number of
transmitted bytes on the particular interface.
If the value of cFcStatsOutElements
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsOutElementsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.240 |
cFcStatsOutDiscardsThis object gives the number of transmitted
frames on this interface that were discarded.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsOutDiscardsHigh.
SNMP v2c or v3 managers can directly use
cFcStatsOutDiscardsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.250 |
cFcStatsOutDiscardsHighThis object gives the higher word value of
the number of transmitted
frames on this interface that were discarded.
If the value of cFcStatsOutDiscards
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsOutDiscardsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.260 |
cFcStatsLinkResetsThis object gives the value of the number of
link resets detected on this particular interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsLinkResetsHigh.
SNMP v2c or v3 managers can directly use
cFcStatsLinkResetsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.270 |
cFcStatsLinkResetsHighThis object gives the higher word value the number of
link resets detected on the particular interface.
If the value of cFcStatsLinkResets
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsLinkResetsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.280 |
cFcStatsGfpInSBitErrThis object gives the value of the number of
single bit GFP errors received on this interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsGfpInSBitErrHigh.
SNMP v2c or v3 managers can directly use
cFcStatsGfpInSBitErrHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.290 |
cFcStatsGfpInSBitErrHighThis object gives the higher word value the number of
single bit GFP errors received on this interface.
If the value of cFcStatsGfpInSBitErr
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsGfpInSBitErrHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.300 |
cFcStatsGfpInMBitErrThis object gives the value of the number of
multi bit GFP errors received on this interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsGfpInMBitErrHigh.
SNMP v2c or v3 managers can directly use
cFcStatsGfpInMBitErrHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.310 |
cFcStatsGfpInMBitErrHighThis object gives the higher word value the number of
multi bit GFP errors received on this interface.
If the value of cFcStatsGfpInMBitErr
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsGfpInMBitErrHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.320 |
cFcStatsGfpInTypeInvalidThis object gives the value of the number of GFP frames
received on this interface with an invalid type.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsGfpInTypeInvalidHigh.
SNMP v2c or v3 managers can directly use
cFcStatsGfpInTypeInvalidHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.330 |
cFcStatsGfpInTypeInvalidHighThis object gives the higher word value of the number
of GFP frames received on this interface with an invalid
type.
If the value of cFcStatsGfpInTypeInvalid
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsGfpInTypeInvalidHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.340 |
cFcStatsGfpInSBlkCRCErrThis object gives the value of the number of
GFP super block CRC errors received on this interface.
This object only shows the lower word value of
the counter.The high word value is given by
cFcStatsGfpInSblkCRCErrHigh.
SNMP v2c or v3 managers can directly use
cFcStatsGfpInSblkCRCErrHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.350 |
cFcStatsGfpInSBlkCRCErrHighThis object gives the higher word value the number of
GFP super block CRC errors received on the particular
interface.
If the value of cFcStatsGfpInSblkCRCErr
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcStatsGfpInSblkCRCErrHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.1.1.360 |
cFcStatsHCTableThis table reports GFP stats on supported Fibre Channel
interfaces. SEQUENCE OF CFcStatsHCEntry .1.3.6.1.4.1.3607.2.60.1.2 |
cFcStatsHCEntryA collection of Fibre channel statisctics on an interface.
All the counters in this table are 64 bits counters and
are useful only to SNMP v2 and v3 managers. CFcStatsHCEntry .1.3.6.1.4.1.3607.2.60.1.2.1 |
cFcStatsInvalidOrdSetsHCThe counter associated with the number of invalid ordered
sets encountered on this interface.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.2.1.10 |
cFcStatsEncodingDispErrHCThe counter associated with the number of encoding
disparity errors encountered on this interface.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.2.1.20 |
cFcStatsInTotalErrHCThe counter associated with the total number of
errors encountered on this interface.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.2.1.30 |
cFcStatsInFramesTruncHCThe counter associated with the number of fibre channel
truncated frames received on this interface.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.2.1.40 |
cFcStatsInFramesTooLongHCThe counter associated with the number of fibre channel
frames received with a length greater than what was agreed
to on this interface.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.2.1.50 |
cFcStatsInFramesBadCRCHCThe counter associated with the number of frames received
with invalid CRC, on this interface.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.2.1.60 |
cFcStatsInFramesHCThe counter associated with the number of
fibre channel frames received on this interface.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.2.1.70 |
cFcStatsInElementsHCThe counter associated with the number of
bytes received on this interface.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.2.1.80 |
cFcStatsInDiscardsHCThe counter associated with the number of
received frames discarded on this interface.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.2.1.90 |
cFcStatsOutFramesBadCRCHCThe counter associated with the number of transmitted
frames with invalid CRC, on this interface.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.2.1.100 |
cFcStatsOutFramesHCThe counter associated with the number of
fibre channel frames transmitted on this interface.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.2.1.110 |
cFcStatsOutElementsHCThe counter associated with the number of
bytes transmitted on this interface.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.2.1.120 |
cFcStatsOutDiscardsHCThe counter associated with the number of transmitted
frames on this interface that were discarded.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.2.1.130 |
cFcStatsLinkResetsHCThe counter associated with the number of
link resets detected on this interface.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.2.1.140 |
cFcStatsGfpInSBitErrHCThe counter associated with the number of single bit
GFP errors received on this interface.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.2.1.150 |
cFcStatsGfpInMBitErrHCThe counter associated with the number of multi bit
GFP errors received on this interface.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.2.1.160 |
cFcStatsGfpInTypeInvalidHCThe counter associated with the number of GFP frames received
on this interface with an invalid type.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.2.1.170 |
cFcStatsGfpInSBlkCRCErrHCThe counter associated with the number of GFP super block
CRC errors received on this interface.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.2.1.180 |
cFcHistTableThis table reports fibre channel stats on supported
interfaces for previous intervals. SEQUENCE OF CFcHistEntry .1.3.6.1.4.1.3607.2.60.1.3 |
cFcHistEntryA collection of Fibre Channel stats history on an
interface. CFcHistEntry .1.3.6.1.4.1.3607.2.60.1.3.1 |
cFcHistIntervalTypeThis object specifies the type of interval for which the
data is being obtained. CerentPeriod (CERENT-TC) .1.3.6.1.4.1.3607.2.60.1.3.1.10 |
cFcHistIntervalNumThis object gives the number of the particular interval
for which the data is being obtained. INTEGER .1.3.6.1.4.1.3607.2.60.1.3.1.20 |
cFcHistInvalidOrdSetsThis object gives the value of the number of invalid
ordered sets on the particular interface during this
sampling interval.
This object only shows the lower word value of
the counter. The high word value is given by
cFcHistInvalidOrdSetsHigh.
SNMP v2c or v3 managers can directly use
cFcHistInvalidOrdSetsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.30 |
cFcHistInvalidOrdSetsHighThis object gives the higher word value the number of
invalid ordered sets on the particular interface during
this sampling interval.
If the value of cFcHistInvalidOrdSets
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistInvalidOrdSetsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.40 |
cFcHistEncodingDispErrThis object gives the value of the number of encoding
disparity errors on the particular interface during
this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistEncodingDispErrHigh.
SNMP v2c or v3 managers can directly use
cFcHistEncodingDispErrHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.50 |
cFcHistEncodingDispErrHighThis object gives the higher word value the number of
encoding disparity errors on the particular interface
during this sampling interval.
If the value of cFcHistEncodingDispErr
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistEncodingDispErrHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.60 |
cFcHistInTotalErrThis object gives the total number of
errors encountered on this interface during
this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistInTotalErrHigh.
SNMP v2c or v3 managers can directly use
cFcHistInTotalErrHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.70 |
cFcHistInTotalErrHighThis object gives the higher word value of the total
number of errors encountered on this interface
during this sampling interval.
If the value of cFcHistInTotalErr
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistInTotalErrHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.80 |
cFcHistInFramesTruncThis object gives the number of fibre channel
truncated frames received on the particular interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistInFramesTruncHigh.
SNMP v2c or v3 managers can directly use
cFcHistInFramesTruncHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.90 |
cFcHistInFramesTruncHighThis object gives the higher word value the number of
fibre channel truncated frames received on this interface
during this sampling interval.
If the value of cFcHistInFramesTrunc
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistInFramesTruncHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.100 |
cFcHistInFramesTooLongThis object gives the value of the number of fibre
channel frames received on this interface
during this sampling interval with a length greater
than what was agreed to.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistInFramesTooLongHigh.
SNMP v2c or v3 managers can directly use
cFcHistInFramesTooLongHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.110 |
cFcHistInFramesTooLongHighThis object gives the higher word value the number of
fibre channel frames received on this interface
during this sampling interval with a length greater
than what was agreed to.
If the value of cFcHistInFramesTooLong
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistInFramesTooLongHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.120 |
cFcHistInFramesBadCRCThis object gives the value of the number of
frames received with invalid CRC, on this interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistInFramesBadCRCHigh.
SNMP v2c or v3 managers can directly use
cFcHistInFramesBadCRCHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.130 |
cFcHistInFramesBadCRCHighThis object gives the higher word value the number of
frames received with invalid CRC, on this interface
during this sampling interval.
If the value of cFcHistInFramesBadCRC
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistInFramesBadCRCHigh, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.140 |
cFcHistInFramesThis object gives the value of the number of
fibre channel frames received on this interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistInFramesHigh.
SNMP v2c or v3 managers can directly use
cFcHistInFramesHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.150 |
cFcHistInFramesHighThis object gives the higher word value the number of
fibre channel frames received on this interface
during this sampling interval.
If the value of cFcHistInFrames
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistInFramesHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.160 |
cFcHistInElementsThis object gives the value of the number of
received bytes on the particular interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistInElementsHigh.
SNMP v2c or v3 managers can directly use
cFcHistInElementsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.170 |
cFcHistInElementsHighThis object gives the higher word value the number of
received bytes on the particular interface
during this sampling interval.
If the value of cFcHistInElements
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistInElementsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.180 |
cFcHistInDiscardsThis object gives the the number of
received frames discarded on this interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistInDiscardsHigh.
SNMP v2c or v3 managers can directly use
cFcHistInDiscardsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.190 |
cFcHistInDiscardsHighThis object gives the higher word value of the number
of received frames discarded on this interface
during this sampling interval.
If the value of cFcHistInDiscards
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistInDiscardsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.200 |
cFcHistOutFramesBadCRCThis object gives the the number of
frames transmitted with invalid CRC, on this
interface, during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistOutFramesBadCRCHigh.
SNMP v2c or v3 managers can directly use
cFcHistOutFramesBadCRCHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.210 |
cFcHistOutFramesBadCRCHighThis object gives the higher word value the number of
frames transmitted with invalid CRC, on this
interface, during this sampling interval.
If the value of cFcHistOutFramesBadCRC
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistOutFramesBadCRCHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.220 |
cFcHistOutFramesThis object gives the value of the number of
frames transmitted on the particular interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistOutFramesHigh.
SNMP v2c or v3 managers can directly use
cFcHistOutFramesHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.230 |
cFcHistOutFramesHighThis object gives the higher word value the number of
frames transmitted on the particular interface
during this sampling interval.
If the value of cFcHistOutFrames
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistOutFramesHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.240 |
cFcHistOutElementsThis object gives the value of the number of
trasmitted bytes on the particular interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistOutElementsHigh.
SNMP v2c or v3 managers can directly use
cFcHistOutElementsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.250 |
cFcHistOutElementsHighThis object gives the higher word value of the number
of transmitted bytes on the particular interface
during this sampling interval.
If the value of cFcHistOutElements
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistOutElementsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.260 |
cFcHistOutDiscardsThis object gives the number of
transmitted frames discarded on this interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistOutDiscardsHigh.
SNMP v2c or v3 managers can directly use
cFcHistOutDiscardsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.270 |
cFcHistOutDiscardsHighThis object gives the higher word value the number of
transmitted frames discarded on this interface
during this sampling interval.
If the value of cFcHistOutDiscards
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistOutDiscardsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.280 |
cFcHistLinkResetsThis object gives the value of the number of
link resets detected on the particular interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistLinkResetsHigh.
SNMP v2c or v3 managers can directly use
cFcHistLinkResetsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.290 |
cFcHistLinkResetsHighThis object gives the higher word value the number of
link resets detected on the particular interface
during this interval.
If the value of cFcHistLinkResets
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistLinkResetsHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.300 |
cFcHistGfpInSBitErrThis object gives the number of
single bit GFP errors received on this interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistGfpInSBitErrHigh.
SNMP v2c or v3 managers can directly use
cFcHistGfpInSBitErrHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.310 |
cFcHistGfpInSBitErrHighThis object gives the higher word value of the number of
single bit GFP errors received on this interface
during this sampling interval.
If the value of cFcHistGfpInSBitErr
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistGfpInSBitErrHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.320 |
cFcHistGfpInMBitErrThis object gives the number of
multi bit GFP errors received on this interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistGfpInMBitErrHigh.
SNMP v2c or v3 managers can directly use
cFcHistGfpInMBitErrHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.330 |
cFcHistGfpInMBitErrHighThis object gives the higher word value the number of
multi bit GFP errors received on this interface
during this sampling interval.
If the value of cFcHistGfpInMBitErr
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistGfpInMBitErrHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.340 |
cFcHistGfpInTypeInvalidThis object gives the value of the number of received
GFP frames with an invalid type on this interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistGfpInTypeInvalidHigh.
SNMP v2c or v3 managers can directly use
cFcHistGfpInTypeInvalidHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.350 |
cFcHistGfpInTypeInvalidHighThis object gives the higher word value of the number
of received GFP frames with an invalid type on this
interface, during this sampling interval.
If the value of cFcHistGfpInTypeInvalid
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistGfpInTypeInvalidHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.360 |
cFcHistGfpInSBlkCRCErrThis object gives the value of the number of
super block CRC GFP errors received on this interface
during this sampling interval.
This object only shows the lower word value of
the counter.The high word value is given by
cFcHistGfpInSblkCRCErrHigh.
SNMP v2c or v3 managers can directly use
cFcHistGfpInSBlkCRCErrHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.370 |
cFcHistGfpInSBlkCRCErrHighThis object gives the higher word value the number of
super block CRC GFP errors received on this interface
during this sampling interval.
If the value of cFcHistGfpInSblkCRCErr
is greater than 4,294,967,295, the higher word value will
be stored in this object.
SNMP v2c or v3 managers can directly use
cFcHistGfpInSBlkCRCErrHC, which is a 64 bit counter.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.3.1.380 |
cFcHistHCTableThis table reports history of fibre channel stats on
supported Fibre Channel interfaces. SEQUENCE OF CFcHistHCEntry .1.3.6.1.4.1.3607.2.60.1.4 |
cFcHistHCEntryA collection of history of Fibre channel statisctics
on an interface.
All the counters in this table are 64 bits counters and
are useful only to SNMP v2 and v3 managers. CFcHistHCEntry .1.3.6.1.4.1.3607.2.60.1.4.1 |
cFcHistInvalidOrdSetsHCThe counter associated with the number of invalid ordered
sets encountered on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.4.1.10 |
cFcHistEncodingDispErrHCThe counter associated with the number of encoding
disparity errors encountered on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.4.1.20 |
cFcHistInTotalErrHCThe counter associated with the total number of
errors encountered on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.4.1.30 |
cFcHistInFramesTruncHCThe counter associated with the number of fibre channel
truncated frames received on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.4.1.40 |
cFcHistInFramesTooLongHCThe counter associated with the number of fibre channel
frames received on this interface during this sampling
interval, with a length greater than what was
agreed to.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.4.1.50 |
cFcHistInFramesBadCRCHCThe counter associated with the number of frames
received with an invalid CRC, on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.4.1.60 |
cFcHistInFramesHCThe counter associated with the number of
frames received on this interface, during this
sampling interval.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.4.1.70 |
cFcHistInElementsHCThe counter associated with the number of
bytes received on this interface during this
sampling interval.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.4.1.80 |
cFcHistInDiscardsHCThe counter associated with the number of
received frames discarded on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.4.1.90 |
cFcHistOutFramesBadCRCHCThe counter associated with the number of
frames transmitted with an invalid CRC,
on this interface during this sampling interval.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.4.1.100 |
cFcHistOutFramesHCThe counter associated with the number of
fibre channel frames transmitted on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.4.1.110 |
cFcHistOutElementsHCThe counter associated with the number of
bytes received on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.4.1.120 |
cFcHistOutDiscardsHCThe counter associated with the number of
transmitted frames discarded on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.4.1.130 |
cFcHistLinkResetsHCThe counter associated with the number of
link resets detected on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.4.1.140 |
cFcHistGfpInSBitErrHCThe counter associated with the number of single bit
GFP errors received on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.4.1.150 |
cFcHistGfpInMBitErrHCThe counter associated with the number of multi bit
GFP errors received on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.4.1.160 |
cFcHistGfpInTypeInvalidHCThe counter associated with the number of
GFP frames with invalid type received on this
interface, during this sampling interval.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.4.1.170 |
cFcHistGfpInSBlkCRCErrHCThe counter associated with the number of GFP super
block CRC errors received on this interface
during this sampling interval.
This is a High Capacity ( 64 bit ) counter.ro Counter64 .1.3.6.1.4.1.3607.2.60.1.4.1.180 |
cFcAlarmTableA list of cFcAlarm entries. SEQUENCE OF CFcAlarmEntry .1.3.6.1.4.1.3607.2.60.1.5 |
cFcAlarmEntryA list of parameters that set up a periodic checking
for cFcAlarm conditions. CFcAlarmEntry .1.3.6.1.4.1.3607.2.60.1.5.1 |
cFcAlarmIndexAn index that uniquely identifies an entry in the
cFcAlarm table. Each such entry defines a
diagnostic sample at a particular interval
for an object on the device. INTEGER .1.3.6.1.4.1.3607.2.60.1.5.1.10 |
cFcAlarmIntervalThe interval in seconds over which the data is
sampled and compared with the rising and falling
thresholds. When setting this variable, care
should be taken in the case of deltaValue
sampling - the interval should be set short enough
that the sampled variable is very unlikely to
increase or decrease by more than 2^31 - 1 during
a single sampling interval.rw INTEGER .1.3.6.1.4.1.3607.2.60.1.5.1.20 |
cFcAlarmVariableThe object identifier of the particular variable to
be sampled.rw OBJECT IDENTIFIER .1.3.6.1.4.1.3607.2.60.1.5.1.30 |
cFcAlarmSampleTypeThe method of sampling the selected variable and
calculating the value to be compared against the
thresholds. If the value of this object is
absoluteValue(1), the value of the selected variable
will be compared directly with the thresholds at the
end of the sampling interval. If the value of this
object is deltaValue(2), the value of the selected
variable at the last sample will be subtracted from
the current value, and the difference compared with
the thresholds.rw Enumeration .1.3.6.1.4.1.3607.2.60.1.5.1.40 |
cFcAlarmValueThe value of the statistic during the last sampling
period. For example, if the sample type is
deltaValue, this value will be the difference
between the samples at the beginning and end of the
period. If the sample type is absoluteValue, this
value will be the sampled value at the end of the
period. This is the value that is compared with the
rising and falling thresholds.
This object only shows the lower word value.
The high word value is given by cFcAlarmValueHigh.
The value during the current sampling period is not
made available until the period is completed and will
remain available until the next period completes.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.5.1.50 |
cFcAlarmValueHighThe higher word value of the statistic during the
last sampling period.
If the value of cFcAlarmValue
is greater than 4,294,967,295, the higher word
value will be stored in this object.ro Counter32 .1.3.6.1.4.1.3607.2.60.1.5.1.60 |
cFcAlarmStartupAlarmThe cFcAlarm that may be sent when this entry is
set to valid.
If the first sample after this entry
becomes valid is greater than or equal to the
risingThreshold and cFcAlarmStartupAlarm is equal to
risingcFcAlarm(1) or risingOrFallingAlarm(3), then a
single rising cFcAlarm will be generated. If the
sample after this entry becomes valid is less than
or equal to the fallingThreshold and
cFcAlarmStartupAlarm is equal to fallingAlarm(2) or
risingOrFallingcFcAlarm(3), then a single falling
alarm will be generated.rw Enumeration .1.3.6.1.4.1.3607.2.60.1.5.1.70 |
cFcAlarmRisingThresholdA threshold for the sampled statistic. When the
current sampled value is greater than or equal to
this threshold, and the value at the last sampling
interval was less than this threshold, a single
event will be generated. A single event will also
be generated if the first sample after this entry
becomes valid is greater than or equal to this
threshold and the associated cFcAlarmStartupAlarm is
equal to risingcFcAlarm(1) or risingOrFallingAlarm(3).
After a rising event is generated, another such event
will not be generated until the sampled value
falls below this threshold and reaches the
cFcAlarmFallingThreshold.
This object can only be used to set the lower
word value of the threshold. If the threshold
to be set is greater than 4,294,967,295 then
cFcAlarmRisingThresholdHigh should be used to
set the upper word value of the threshold.rw Integer32 .1.3.6.1.4.1.3607.2.60.1.5.1.80 |
cFcAlarmRisingThresholdHighThe upper word value of the rising threshold for
the sampled statistic.
If the value of threshold to be set in
cFcAlarmRisingThreshold is greater than
4,294,967,295, then this object
should be used to set the upper word value of the
threshold.rw Integer32 .1.3.6.1.4.1.3607.2.60.1.5.1.90 |
cFcAlarmFallingThresholdA threshold for the sampled statistic. When the
current sampled value is less than or equal to this
threshold, and the value at the last sampling
interval was greater than this threshold, a single
event will be generated. A single event will also
be generated if the first sample after this entry
becomes valid is less than or equal to this
threshold and the associated cFcAlarmStartupAlarm is
equal to fallingcFcAlarm(2) or risingOrFallingAlarm(3).
After a falling event is generated, another such event
will not be generated until the sampled value
rises above this threshold and reaches the
cFcAlarmRisingThreshold.
This object can only be used to set the lower
word value of the threshold. If the threshold
to be set is greater than 4,294,967,295, then
cFcAlarmFallingThresholdHigh should be used to
set the upper word value of the threshold.rw Integer32 .1.3.6.1.4.1.3607.2.60.1.5.1.100 |
cFcAlarmFallingThresholdHighThe upper word value of the falling threshold for
the sampled statistic.
If the value of threshold to be set in
cFcAlarmFallingThreshold is greater than
4,294,967,295, then this object
should be used to set the upper word value of the
threshold.rw Integer32 .1.3.6.1.4.1.3607.2.60.1.5.1.110 |
cFcAlarmStatusThe status of this cFcAlarm entry.rw Enumeration .1.3.6.1.4.1.3607.2.60.1.5.1.120 |
cerentFcMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.3607.5.40 |
cerentFcMIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.3607.5.40.1 |
cerentFcMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.3607.5.40.2 |